DK-Lok UHP Fittings. No.09-01(E) May 2017

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "DK-Lok UHP Fittings. No.09-01(E) May 2017"

Transcription

1 K-ok UP Fittings No.09-01() May 2017

2 ean UP Fitting ontents ean Wed Fittings Micro bow WM Micro ee WM Micro ross ee WMX Micro ribow WMB Micro af bow WM Micro Reducing bow WMR Micro Reducing ee WMR ong ross ee WX ong Reducer WR uto Butt Wed ong bow W uto Butt Wed ong ee W uto Butt Wed ong ross ee WX uto Butt Wed ong Reducing ee WR uto Butt Wed Union WU uto Butt Wed Reducing Union WRU uto Butt Wed ong Gand G Mae Gand GM Socket Wed ong Gand GS Socket Wed Reducing ong Gand GSR Socket Wed Short Gand GSS ube dapter Gand G Bind Gand BG Femae Nut FN Micro Reducer WMR 07 Meta Gasket Face-Sea Fittings Mae Nut MN 17 ong bow W 08 Short Gand SG 13 ap P 17 ong ee W 08 ong Gand G 13 Pug PG 17 ong Reducing ee WR 08 uto Butt Wed Short Gand SG 14 Gasket GK

3 Gasket Retainer GK 18 Union bow 22 igh Fow Femae Nut FN 26 Gasket Bind GKB 18 Union ee 22 igh Fow Mae Nut MN 26 oube Mae Union MU 19 Union ross ee X 23 ube Fitting to uto Butt Wed onnector W 26 oube Mae Reducing Union MRU 19 Mae NP bow M-N 23 Weded ssemby Fittings Bukhead Union BU 19 ouping 23 Swive Femae/ Mae Union SFMU 27 ube Fitting onnector 20 igh Fow Fittings Swive Femae Union SFU 27 ube Fitting Bukhead onnector B 20 igh Fow Gand G 24 Swive Mae NP onnector SM-N 27 Mae NP onnector M-N 20 igh Fow Reducer R 24 Swive Femae NP onnector SF-N 28 Femae NP onnector F-N 21 uto Butt Wed igh Fow Reducer R 24 Swive ube Fitting onnector S 28 Bukhead Mae NP onnector BM-N 21 igh Fow Bukhead Reducer BR 25 Swive bow S 28 ube Butt Wed Bukhead onnector BW 21 igh Fow Union bow 25 Swive ee S 29 Straight hread O-Ring Sea Mae onnector M-UO 22 igh Fow Union ee

4 Ordering Information K-ok Wed Fittings and Meta Face Sea Fittings are ordered by product code shown beow. U WM 4 64 S B K-ok UP Fittings Product ype Seeve ength Materia Inner Surface eve Seeve ength Materia Inner Surface eve 4 : 6 : 8 : 12 : 16 : 1 64 : 91 : : : 244 : 24.4 S : 316 Stainess Stee : 316 Stainess Stee VR B : B P : P Product ype Micro Fittings Face Sea Fittings WM Micro 90 bow FN Femae Nut WM Micro ee MN Mae Nut WMX Micro ross ee P ap WMB Micro ribow PG Pug WM Micro 45 bow GK Gasket WMR Micro Reducing bow GK Gasket Retainer WMR Micro Reducing ee GKB Gasket Bind WMR Micro Reducer MU oube Mae Union ube Butt Wed Fittings BU Bukhead Union W ong bow K-ok ube Fitting onnector WR ong Reducing bow B K-ok Bukhead ube Fitting onnector W ong ee M-N Mae NP onnector WR ong Reducing ee F-N Femae NP onnector WX ong ross ee BM-N Bukhead Mae NP onnector WR ong Reducer BW BW Bukhead onnector SG Face Sea Fittings Femae Gand M-UO O-ring Sea Mae onnector Union bow G Mae Gand Union ee SG utomatic Femae Gand X Union ross ee G utomatic Mae Gand ouping GM Mae Wed Gand G igh Fow Gand GS GSR Socket Wed ong Gand Socket Wed Reducing ong Gand R R igh Fow Reducer utomatic igh Fow Reducer GSS Socket Wed Short Gand FN igh Fow Femae Nut G ube dapter Gand MN igh Fow Mae Nut BG Bind Gand W ube Fitting to uto Butt Wed onnector 3

5 UP Fitting ean Wed Fittings Rating he pressure ratings provided in this cataogue are obtained by the cacuation with the aowabe stress of 20,000 psig (1,378 bar) of stainess stee 316 at -20 (-28 ) to 100 (37 according to SM B31.3 and B31.1 code. derating factors are driven by temperatures greater than 100 (37 ). hey are determined from these pressure code isted in the tabe 1 and in accordance with SM B31.3 and B31.1 code. Mutipy the appicabe pressure rating in this cataogue by the factor in the tabe 1 to determine the working pressure. abe 1. erating Factor Materia SS 316 SS 316 emperature ) erating Factor -20 (-28) ~ 100 (37) 0 0 ~ 200 (93) 0 3 ~ 400 (204) ~ 600 (315) ~ 800 (426) ~ 1000 (537) Materia Materia 316 Stainess Stee 316 Stainess Stee VR eaning & Packing esignation S Bar stock SM S479 SM 479/276 Forging SM S182 SM 182 Passivation is done in accordance with SM 380, Utra-sonic ceaning in a cass 100 cean room enviroment, impemented with resistivity over 1.I water after finishing the passivation for precision ceaning. fter ceaning, the product receives doube packaging in a cean room enviroment using anti-static poyethyene bags and high purity nitrogen incusion. Surface Roughness Specif ication Grade esignation Surface eve B B R a : 10 μin Ry : 3.0 μm P P R a : 5 μin Ry : 0.7 μm Feature - ccoodates the miniature tubing system - ows cose parts spacing - Fow capacity to be equivaent to the conventiona big size weding fitting Rounded gde : a edges of the product are rounded for safe handing and to hep prevent damage the other products Materia eat code : marked on the product for easy raw materia traceabiity aser Marking : shows the manufacturer, materia / grade, heat code and process number on the body for easy identification 10 μ R a and 5 μ R a are standard surface finish P P BMS For automatic tube butt weding, integra fier ring is provided for proper aignment Sharp and burr-free tube end : Radiused Junction : pockets and entrapment zones in the juction portion are eiminated for a smooth fow transition ccuratey machined diameter dimension conforms to tube diameter For ees, the run ( to ) sha precede the branch( ) For rosses, the run ( to ) sha precede the branch( to ) 4

6 ean Wed Fittings Micro bow WM ube () 1/8 U-WM-2 hickness (ube Wa) psig(bar) / (585) Body ube U-WM-4 U-WM / (351) U-WM / (254) psig(bar) U-WM- U-WM- U-WM / (420) (310) (240) U-WM / (200) Micro ee WM ube () 1/8 U-WM-2 hickness (ube Wa) psig(bar) / (585) Body ube U-WM-4 U-WM / (351) U-WM / (254) psig(bar) U-WM- U-WM- U-WM- U-WM / (420) (310) (240) / (200) Micro ross ee WMX ube () 1/8 U-WMX-2 U-WMX-4 hickness (ube Wa) psig(bar) / (585) / (351) Body ube U-WMX U-WMX / (254) psig(bar) U-WMX- U-WMX- U-WMX / (420) (310) (240) U-WMX / (200) 5

7 ean Wed Fittings Micro ribow WMB ube () U-WMB-4 U-WMB-6 U-WMB-8 hickness (ube Wa) psig(bar) / (351) / (254) Body ube Micro af bow WM ube () U-WM-4 hickness (ube Wa) psig(bar) / (351) Body ube U-WM-6 U-WM / (254) Micro Reducing bow WMR () (1) U-WMR-6X4 hickness(wa) hickness(wa) Body ube psig(bar) U-WMR-8X / (254) 1 1 U-WMR-8X /16 psig(bar) U-WMR-X U-WMR-X U-WMR-X / (310) 3500(240) 2900(200) U-WMR-X / (200) 6

8 Micro Reducing ee WMR () (1) U-WMR-6X4 hickness(wa) hickness(wa) Body ube psig(bar) U-WMR-8X / (254) U-WMR-8X /16 psig(bar) 1 1 U-WMR-X U-WMR-X U-WMR-X / (310) 3500(240) 2900(200) U-WMR-X / (200) Micro Reducer WMR () (1) 1/8 U-WMR-4X2 hickness(wa) hickness(wa) psig(bar) 5100(351) U-WMR-6X U-WMR-8X (254) U-WMR-8X psig(bar) U-WMR-X U-WMR-X U-WMR-X (310) 3500(240) 2900(200) U-WMR-X (200) 7

9 ean Wed Fittings ong bow W ube () U-W hickness (ube Wa) (351) Body ube psig(bar) U-W U-W / (254) U-W U-W / (165) (165) psig(bar) U-W (420) U-W (310) U-W / (240) U-W / (200) 1 U-W / (200) ong ee W ube () U-W hickness (ube Wa) (351) Body ube psig(bar) U-W U-W / (254) U-W U-W / (165) (165) psig(bar) U-W (420) U-W (310) U-W / (240) U-W / (200) 1 U-W / (200) ong Reducing ee WR () (1) U-WR-6X4-191 hickness(wa) hickness(wa) Body ube psig(bar) U-WR-8X / (254) U-WR-8X /16 U-WR-12X / (165) U-WR-12X / (165) psig(bar) U-WR-X (310) U-WR-X-191 U-WR-X /16 11/ (240) 2900(200) 1 U-WR-X / (200) U-WR-X / (200)

10 ong ross ee WX ube () U-WX hickness (ube Wa) (351) Body ube psig(bar) U-WX U-WX /8 3700(254) psig(bar) U-WX (420) U-WX (310) U-WX /8 3500(240) U-WX /8 2900(200) ong Reducer WR () (1) U-WR-6X4-191 hickness(wa) hickness(wa) psig(bar) U-WR-8X (254) U-WR-8X U-WR-12X (165) 1 1 U-WR-16X (165) 1 U-WR-16X (165) 1 psig(bar) U-WR-X-191 U-WR-X-191 U-WR-X (240) 3500(240) 2900(200) U-WR-X-191 U-WR-X (200) 2900(200) 1 U-WR-1X (200) 1 U-WR-1X (200) uto Butt Wed ong bow W 1 () hickness (ube Wa) U-W U-W U-W / (351) 3700(254) U-W / (165) 1 U-W (165) psig(bar) U-W--191 U-W--191 U-W / (420) 4500(310) 3500(240) U-W / (200) 1 U-W / (200) 1 Body ube psig(bar) 9

11 ean Wed Fittings uto Butt Wed ong ee W a () hickness (ube Wa) U-W U-W U-W / (351) 3700(254) U-W / (165) 1 U-W (165) psig(bar) U-W--191 U-W--191 U-W--191 U-W /16 11/ (420) 4500(310) 3500(240) 2900(200) 1 U-W / (200) 1 Body ube psig(bar) uto Butt Wed ong ross ee WX () U-WX U-WX U-WX hickness (ube Wa) psig(bar) /8 5100(351) 3700(254) 1 Body ube psig(bar) U-WX--191 U-WX--191 U-WX /8 6100(420) 4500(310) 3500(240) U-WX /8 2900(200) uto Butt Wed ong Reducing ee WR 1 t d d1 hickness(wa) hickness(wa) 1 1 d1 a t Body ube () (d) psig(bar) U-WR-6X4-191 U-WR-8X4-191 U-WR-8X /16 11/ (254) U-WR-12X / (165) U-WR-12X / (165) psig(bar) U-WR-X / (200) 10

12 uto Butt Wed Union WU 1 ube () U-WU-4 U-WU-6 U-WU-8 U-WU-12 1 U-WU-16 1 U-WU- U-WU- U-WU- U-WU- U-WU-1 hickness (ube Wa) (351) (254) (165) (165) psig(bar) (420) (310) (240) (200) (200) 1 psig(bar) t uto Butt Wed Reducing Union WRU 1 a d d1 hickness(wa) hickness(wa) 1 t () (d) U-WRU-6x4-191 U-WRU-8x4-191 U-WRU-8x U-WRU-12x U-WRU-x-191 U-WRU-x-191 U-WRU-x d a psig(bar) 3700(254) 2400(165) psig(bar) 4500(310) 2900(200) 2900(200) 11

13 UP Fitting Meta Gasket Face-Sea Fittings Rating eaning & Packing pressure rating foow the cacuation as to SM B31.3 Process Pip-ing code and SM B31.1 Power Piping code. he working pressure rating at the room temperature is determined by the materia of gasket and the aowabe temperature range per the materias is isted in abe 2. abe 2. emperature range Part Materia emperature F ( ) Fitting 316 Stainess Stee 316 Stainess Stee VR 1000 (537) Gasket 316 Stainess Stee 1000 (537) Nicke 600 (315) Materia Materia 316 Stainess Stee 316 Stainess Stee VR Gasket esignation S Bar stock SM S479 SM 479/276 Specif ication 316 Stainess Stee S SM 167 Nicke N SM B162 Forging SM S182 SM 182 Passivation is done in accordance with SM 380, Utra-sonic ceaning is performed in a cass 100 enviroment with resistivity over 1.I water after finishing the passivation for precision ceaning. fter ceaning, a product is doube packed in the cean room using anti-static poyethyene bags where high purity nitrogen incusion. Surface Roughness Grade esignation Surface eve B B R a : 10μin Ry : 3.0μm P P R a : 5μin Ry : 0.7μm Pating he interna surface of the femae-threaded nut are siver pated to hep reduce gaing and reduces the pu-up torque. Note : In the event of the damage or remova of the siver pating, thread gaing may be occur damaging the fitting components and preventing against proper seaing performance. esting R Fittings are rated to a heium eak rate of ess than mbar./sec and tested in accordance with SMI F1-96 and SM B-S. Feature - eak-tight service provided from vacuum to positive pressure appication - Minimized space is needed for instaation and or remova Retainer gasket assemby for easy instaation and remova in the minimized space Surface finish are 10 μ R a and 5 μ R a wo hoes are provided for easy eak test here is no virtua eak zone Femae threads are siver-pated to hep reduce gaing and ensure easy ow torque assemby Materia eat code is marked on the product for easy raw materia traceabiity 12

14 Meta Gasket Face-Sea Fittings Short Gand SG U-SG U-SG-4-64 U-SG-4-96 ead () 1/8 ube () 1/ (585) (350) (350) U-SG (350) U-SG U-SG U-SG (241) U-SG (241) U-SG (241) U-SG-8X (296) psig(bar) U-SG-4X (468) U-SG-4X (337) U-SG-8X (241) U-SG-8X (213) U-SG-12X (206) psig(bar) ong Gand G U-G U-G-4-64 ead () 1/8 ube () 1/ psig(bar) (585) (350) U-G (349) U-G (350) U-G (350) U-G U-G U-G (241) U-G (241) U-G (241) U-G-8X (296) U-G (165) U-G (165) psig(bar) U-G-4X-191 U-G-4X-191 U-G-8X (468) (337) (241) U-G-8X (213) U-G-12X (206) 13

15 Meta Gasket Face-Sea Fittings uto Butt Wed Short Gand SG U-SG-4-64 ube () 6.35 ead () psig(bar) 5100(351) U-SG (351) U-SG U-SG U-SG (241) U-SG (241) psig(bar) U-SG (468) U-SG (337) U-SG (241) U-SG (213) uto Butt Wed ong Gand G ead ube 1 () () psig(bar) U-G U-G-8X4-191 U-G (351) 3500(241) U-G U-G U-G (241) 2400(165) 2400(165) psig(bar) U-G--191 U-G (468) 4900(337) U-G--191 U-G (241) 3100(213) U-G (206) 14

16 Mae Gand GM U-GM-2 U-GM-4X2 U-GM-4 U-GM-6 U-GM-8 U-GM-8X4 U-GM-12 U-GM-16 ead () 1/8 1 ube () 1/ / (771) (689) (689) (296) psig(bar) (241) (296) (254) (206) Socket Wed ong Gand GS ube ead 1 () () psig(bar) U-GS-2 1/ / (489) U-GS (378) U-GS (291) U-GS (206) U-GS (192) U-GS (206) Socket Wed Reducing ong Gand GSR U-GSR-4X2 U-GSR-8X4 ead () ube 1 () psig(bar) 1/ (551) (241) 15

17 Meta Gasket Face-Sea Fittings Socket Wed Short Gand GSS U-GSS-4 U-GSS-4-19 ube ead 1 () () psig(bar) 5500(378) ube dapter Gand G U-G-4 U-G-6 U-G-8 ube ead () () psig(bar) Bind Gand BG U-BG-2 U-BG-4 U-BG-8 ube () 1/ ead () 1/ U-BG-12 U-BG Femae Nut FN U-FN-2 U-FN-4 U-FN-8 () 1/ ex () 7/6 1 1/16 U-FN-12 U-FN

18 Mae Nut MN U-MN-2 () 1/ ex () U-MN /8 U-MN /16 U-MN-12 U-MN /16 1 5/8 ap P U-P-2 () 1/ ex () U-P U-P /16 U-P U-P Pug PG U-PG-2 () 1/ ex () U-PG /8 U-PG /16 U-PG /16 U-PG /8 17

19 Meta Gasket Face-Sea Fittings Gasket GK U-GK-2 () 1/ U-GK U-GK U-GK U-GK Gasket Retainer GK U-GK-4 () U-GK U-GK U-GK Gasket Bind GKB U-GKB-2 () 1/ U-GKB U-GKB U-GKB U-GKB

20 oube Mae Union MU U-MU-2 U-MU-4 ead () 1/ ex () 5/8 U-MU /16 U-MU /16 U-MU /8 oube Mae Reducing Union MRU ead () ead () U-MRU-8X /16 1 ex () 1 Bukhead Union BU 1 ead () U-BU U-BU U-BU /16 1 1/16 U-BU /16 1 1/16 ex () 1 ex () 19

21 Meta Gasket Face-Sea Fittings 1 ube Fitting onnector B U--4X2 ead () ube () 1/ B ex () 5/8 1 ex () U /8 9/16 U--8X /16 11/16 U /16 7/8 1 2 ube Fitting Bukhead onnector B B U-B-4 ead () ube () B ex () 5/8 1 ex () 5/8 2 ex () 9/16 U-B /8 5/8 9/16 U-B-8X /16 11/16 U-B /16 15/16 7/8 Mae NP onnector M-N ead () NP U-M4-2N 1/ /8 ex () U-M4-4N U-M8-4N / /16 U-M8-6N /16 U-M8-8N /16 U-M12-12N /16 U-M16-16N /8 20

22 Femae NP onnector F-N U-F4-2N U-F4-4N ead () NP 1/ ex () U-F8-6N /16 U-F8-8N /16 U-F12-12N /16 U-F16-16N /8 5/8 1 Bukhead Mae NP onnector BM-N 1 1 U-BM4-4N ead () NP ex () ex () U-BM8-4N ube Butt Wed Bukhead onnector BW 1 U-BW-4 ead () ex () 1 ex () U-BW

23 Meta Gasket Face-Sea Fittings M Straight hread O-Ring Sea Mae onnector M-UO 1 ead 1 ex () () U-M4-6U U-M8-6U /16 U-M8-10U M 9/16-18 UNF 9/16-18 UNF 7/8-14 UNF Union bow ead ex () () U U /16 U U /16 Union ee U--4 ead () ex () U /16 U U /

24 Union ross ee X U-X-4 U-X-8 ead () ex () U-X U-X /16 13/16 Mae NP bow M-N ead () NP U-M4-2N 1/ ex () U-M4-4N U-M8-6N U-M8-8N / /16 1 ouping U--2 U--4 () 1/ ex () U /16 U U

25 igh Fow Fittings igh Fow Fittings igh Fow Gand G U-G-4X6 ead () igh Fow Reducer R U-R-4X6 ead () ex () 5/8 1 1 uto Butt Wed igh Fow Reducer R U-R-4X6 ead () ex () 5/

26 igh Fow Bukhead Reducer BR U-BR-4X6 ead () ex () 1 ex () igh Fow Union bow U--4 ead () ex () igh Fow Union ee U--4 ead () ex ()

27 igh Fow Fittings igh Fow Femae Nut FN U-FN-4 ead () ex () igh Fow Mae Nut MN ead () ex () M U-MN /8 9/16-18 UNF M ube Fitting to uto Butt Wed onnector W U-W-4X4 ead () U-W-6X B ex () 1 ex () / /8 11/ B 26

28 Weded ssemby Fittings Swive Femae / Mae Union SFMU U-SFMU-4 ead () ex () 5/8 1 ex () 1 Swive Femae Union SFU 1 U-SFU-4 ead () ex () 1 ex () U-SFU /16 1 1/16 Swive Mae NP onnector SM-N 1 U-SM4-2N ead () NP 1/ U-SM4-4N /16 U-SM8-6N /16 1 1/16 U-SM8-8N /8 1 1/ ex () 1 ex () 1 27

29 Weded ssemby Fittings Swive Femae NP onnector SF-N 1 U-SF4-4N ead () NP ex () U-SF8-6N 7/8 1 1/16 U-SF8-8N /16 1 1/16 1 ex () Swive ube Fitting onnector S U-S-4 ead () NP B ex () 1 ex () 2 ex () 9/ B Swive bow S U-S-4 ead () ex () 28

30 Weded ssemby Fittings Swive ee S U-S-4 ead () ex () 29

31 UP Fitting Meta Gasket Face-Sea Fittings Weding GW GW Gasket ssemby Wrench ighten 1/8 urn For Stainess Stee & Nicke Gasket urn For opper Gasket od 1/8 ~ urn 30

32 Safe omponent Seection he seection of component for any appications or system design must be considered to ensure safe performance. omponent function, materia compatibiity, component ratings, proper instaation, operation and maintenance remain the soe responsibiity of the system designer and the user. K-ok accepts no iabiity for any improper seection, instaation, operation or maintenance. ead Quartersand Factory 7, Goden root-ro 129beon-gi, Juchon-myeon, Gimhae-si, Gyeongsangnam-do, South Korea e. (82) Fax. (82)

Clean Fittings. No.06-2 August 2015

Clean Fittings. No.06-2 August 2015 Clean Fittings No.06-2 ugust 205 Clean Fitting Contents Clean Weld Fittings Mini lbow WM Mini ee WM Mini Cross WMX Mini educing lbow WM Mini educing ee WM Mini educing Union WMU ong lbow W ong ee W ong

More information

INTEGRAL BONNET FORGED NEEDLE VALVES. VN5 Series.

INTEGRAL BONNET FORGED NEEDLE VALVES. VN5 Series. INTEGRA BONNET FORGED NEEDE VAVES VN5 Series www.uniok.com Vaves - VN5 Series Features ressure rating up to 5000psig (340bar) @38 C (00 F) Temperature rating from -53 C(-65 F) to 232 C (450 F) wit standard

More information

Product Features: Ultra-High Purity cleaning, assembly, and packaging in a Class 100 Clean Room environment for all wetted components.

Product Features: Ultra-High Purity cleaning, assembly, and packaging in a Class 100 Clean Room environment for all wetted components. ittings Metal ace Seal and Weld ittings ittings designed for ultra-high purity conditions for critical applications hese UP fittings are designed for critical applications where ultra-high pure conditions

More information

Semiconductor / High Purity Products FITTINGS TK SCT. Weld Fittings / Metal Seal Fittings. SCT Division

Semiconductor / High Purity Products FITTINGS TK SCT. Weld Fittings / Metal Seal Fittings. SCT Division Semiconductor / High Purity Products K SC IINGS Weld ittings / etal Seal ittings SC ivision K SC SUPR CN CHNOOGY ICRO W IINGS ORG W IINGS C S IINGS 2 Super Clean itting Series W and etal Seal ittings components

More information

Metal Gasket Face Seal Fittings

Metal Gasket Face Seal Fittings Metal Gasket ace Seal ittings Series IOK Group IOK GmbH (Headquarter) Sprendlinger andstr. 5, 63069 Offenbach am Main, Germany el.: +49 69 8900 4498 ax: +49 69 8900 4495 IOK, Inc. 3843 North romenade lvd.,

More information

Industrial: Flare Fittings

Industrial: Flare Fittings Industria: Fare Fittings SAE 45 Fare Resists echanica Pu-out eets SAE Functiona Requirements Resists Vibration U isted Inverted Fare Stee ut option Economica U isted Access Vaves Finger Tight Quick Sea

More information

VCR Metal Gasket Face Seal Fittings

VCR Metal Gasket Face Seal Fittings VR Metal Gasket ace Seal ittings 1/8 to 1 and 6 to 18 mm sizes high-purity stainless steels www.swagelok.com VR Metal Gasket ace Seal ittings Index General Information Glands ages 4, 5, 6 odies ages 6,

More information

Prestolok. Spark resistant push-in fittings for fluids. Catalogue /UK

Prestolok. Spark resistant push-in fittings for fluids. Catalogue /UK Spark resistant push-in fittings for fuids Cataogue 352-/UK Cataogue 352-/UK Index Straight connectors Mae - BSPT Mae - Metric Mae - BSPT Mae - NPTF F23PB - p. C F2PB - p. C F3PB - p. C FPB - p. C Mae

More information

3-PIECE TUBE ASSEMBLY

3-PIECE TUBE ASSEMBLY 3-PIECE TUBE ASSEMBY STAINESS STEE HIGH PRESSURE 37 TUBE FITTINGS 1/8 TO 2 MEETS SAE STANDARD J514 If necessary, see SAE Standard J514 for a complete list of dimensions. NPT Tapered Pipe Threads meet the

More information

Instrumentation Pipe & Weld Fittings. No.03-9 August 2017

Instrumentation Pipe & Weld Fittings. No.03-9 August 2017 Instrumentation ipe & Weld Fittings No.03-9 August 2017 Instrumentation ipe & Weld Fittings Technical Information Thread Fittings Close Nipple GNC 04 ipe lug G 07 Tee GT 10 ex Nipple GN ex Reducing Nipple

More information

ULTRA HIGH PURITY FITTINGS

ULTRA HIGH PURITY FITTINGS URA HIGH PURIY IINGS 3 ABE O ONENS PRODU RANGE OVERVIEW P.004 INRODUION P.008 Informations P.008 Descriptions P.009 Assembly P.010 Micro ittings P.011 Wel ittings P.011 echnical ata P.012 Nomenclature

More information

CATALOG 2016 SERIES 1

CATALOG 2016 SERIES 1 CTLOG 2016 SRIS 1 Passon Series 1 Passon Series 1 - The new range of innovative fittings create by Passon, market eaer in esign an manufacture of reiabe fittings for poyethyene pipe systems. Passon Series

More information

CATALOG 2017 SERIES 1

CATALOG 2017 SERIES 1 CTLOG 2017 SRIS 1 Passon Series 1 Passon Series 1 - The new range of innovative fittings create by Passon, market eaer in esign an manufacture of reiabe fittings for poyethyene pipe systems. Passon Series

More information

Flat fan nozzles. Nozzle characteristics

Flat fan nozzles. Nozzle characteristics Fat fan nozzes Bet ceaning Coating Steam ceaning Degreasing High pressure ceaning Grave washing Cooing Surface treatment Phosphating Rain curtains Foam contro Foam spraying Lubrication Fiter ceaning ceaning

More information

20 Series Tube Fittings and Tubes

20 Series Tube Fittings and Tubes 20 Series Fittings and s 20,000 psi (379 bar) FIOK Group FH0204083 www.fitokgroup.com 20 Series Fittings ontents Features oned-and-hreaded onnection. Glands - G rosses - Metal-to-metal seal provides perfect

More information

INSTRUMENTATION BALL VALVES VB3 Series

INSTRUMENTATION BALL VALVES VB3 Series INSTRUMENTATION BALL VALVES VB3 Series www.korokusa.com Kor-Lok USA eatures Directiona ande Pressure rating wit standard PTE seats 3000psig (206bar) ony for te vaves wit orifice 4.8 2500psig (172bar) for

More information

CHECK valve SPECIFICATION. glt valves CHECK VALVE APPLICATION MANUFACTURING STANDARDS

CHECK valve SPECIFICATION. glt valves CHECK VALVE APPLICATION MANUFACTURING STANDARDS CECK VAVE APPICATION SPECIFICATION Sometimes referre to as non-return valve, check valves prevents back-flow, constantly keeping flow in one irection. Check valve are esigne to close quickly an automatically

More information

Our policy is one of continuous research and development. We therefore reserve the right

Our policy is one of continuous research and development. We therefore reserve the right Tubing & Hose Metric Nyon, Poyurethane, Poyester Reinforced PVC, Meta Braided Rubber, Copper, Doube Wa Brazed Stee Avaiabe in a variety of different types to suit a wide range of appications A tubing can

More information

Air nozzles. Air curtains Blowing off and out Cleaning Cooling Drying Reheating Transporting and many others...

Air nozzles. Air curtains Blowing off and out Cleaning Cooling Drying Reheating Transporting and many others... Air nozzes Air curtains Bowing off and out Ceaning Cooing Drying Reheating Transporting and many others Air nozzes As a rue, any fat fan or soid stream nozze can be operated with air instead of iquid However,

More information

VCR. Metal Gasket Face Seal Fittings. 1/16 to 1 in. and 6 to 18 mm sizes. High-purity stainless steels

VCR. Metal Gasket Face Seal Fittings.  1/16 to 1 in. and 6 to 18 mm sizes. High-purity stainless steels www.swagelok.com Metal asket ace Seal ittings /6 to and 6 to 8 mm sizes igh-purity stainless steels The original design, the authentic brand 2 Metal asket ace Seal ittings ontents lands Page 4 odies Page

More information

Quick Connect Couplings Series ES single shut-off - The ORIGINAL DN 7.2

Quick Connect Couplings Series ES single shut-off - The ORIGINAL DN 7.2 Quick Connect Coupings Series ES singe shut-off - The ORIGINAL Quick Connect Coupings of brass or brass MS 58 nicke-pate New hose barb for safe fit of hose an easy assemby Seeve esign protects the couping

More information

10 Series Tube Fittings and Tubing

10 Series Tube Fittings and Tubing 0 Series ube ittings and ubing 0,000 psi (690 bar) IOK roup IOK mbh (Headquarter) Sprendlinger andstr. 5, 63069 Offenbach am Main, ermany el.: +49 69 900 449 ax: +49 69 900 4495 IOK, Inc. 343 North romenade

More information

VDC Series High-Pressure Type Variable Volume Vane Pump

VDC Series High-Pressure Type Variable Volume Vane Pump V SRS PRSSUR TYP VARA VU VA PUP V Series igh-pressure Type Variabe Voume Vane Pump eatures q ighy efficient and stabe high-pressure operation nnovative pressure contro and pressure baance mechanisms combine

More information

Pneufit C composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube

Pneufit C composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube Pneufit composite and Pneufit M fittings Ø 1/8... 1/2 O/D tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad range

More information

Clamping devices. CLAMPEX clamping elements offer new possibilities as a shaft-hub-connection:

Clamping devices. CLAMPEX clamping elements offer new possibilities as a shaft-hub-connection: Keyess camping devices Camping devices Genera description: CLAMPEX are keyess camping devices designed to transmit torque via friction on mating components. These designs produce high transmittabe torque

More information

VCR Metal Gasket Face Seal Fittings

VCR Metal Gasket Face Seal Fittings lloy 2507 Super uplex Weld Fittings 1 www.swagelok.com Metal Gasket Face Seal Fittings WL 1/16 to 1 in. and 6 to 18 mm sizes High-purity stainless steels The original design, the authentic brand 2 Weld,,

More information

GStype/HGStype/WGStype

GStype/HGStype/WGStype Tooing News No.E473 Achieving Stabe And Long Too Life With Exceent Chip Evacuation Super MutiDri GStype/HGStype/WGStype 2009-015 series series New J fute Design Achieves Exceent Chip Contro And Stabe Driing

More information

Floating Ball Valve - Design Features

Floating Ball Valve - Design Features 408 imbledon Rd. / Edmond, OK 73003 / Phone: 405-509-2665 / Fax: 866-239-1587 / www.mako-products.net Flanged Ball Valves Floating Ball Valve - Design Features Mounting and Stem Seal Design Actuator Mounting

More information

Polypress Pipes and Fittings

Polypress Pipes and Fittings Poypress Pipes and Fittings Poypress pipes escription Weigt Tecnica data Product code Muti-ayer composite pipe coied PEX-AL-PEX kg/coi 16 x 2.0 x 100m 11.10 16 PP96016400 16 x 2.0 x 200m 22.20 16 PP96016700

More information

GXL SERIES. DC 2-wire type Micro-size Inductive Proximity Sensor. High performance in micro-size design. Versatile mounting. Reduced wiring operation

GXL SERIES. DC 2-wire type Micro-size Inductive Proximity Sensor. High performance in micro-size design. Versatile mounting. Reduced wiring operation 777 PHOTO PHOTO DC -wire Micro-size Inductive Proximity SERIES Reated Information Genera terms and conditions... F-17 Gossary of terms... P.16~ seection guide... P.77~ Genera precautions... P. Conforming

More information

AIL CAST STEEL GATE, GLOBE & CHECK VALVES. ASME Class mm mm (2-48 ) API 600 API 603 AUDCO INDIA LIMITED ASME B16.

AIL CAST STEEL GATE, GLOBE & CHECK VALVES. ASME Class mm mm (2-48 ) API 600 API 603 AUDCO INDIA LIMITED ASME B16. AIL CAST STEEL GATE, GLOBE & CHECK VALVES ASME Cass 150-2500 50mm - 1200mm (2-48 ) API 600 API 603 ASME B16.34 AUDCO INDIA LIMITED Gate/Gobe/Check Introduction Vaves to API 600 The AIL Cast Stee Gate,

More information

GXL SERIES. DC 2-wire type Micro-size Inductive Proximity Sensor. High performance in micro-size design. Reduced wiring operation. Versatile mounting

GXL SERIES. DC 2-wire type Micro-size Inductive Proximity Sensor. High performance in micro-size design. Reduced wiring operation. Versatile mounting 1 DC -wire Micro-size Inductive Proximity SERIES Reated Information Genera terms and conditions... F- Gossary of terms... P.176~ guide... P.71~ Genera precautions... P.179~ PHOTO PHOTO IGHT FOW PARTICUAR

More information

Flat fan nozzles. tongue-type nozzles

Flat fan nozzles. tongue-type nozzles Fat fan nozzes et ceaning Coating Steam ceaning Degreasing igh pressure ceaning Grave washing Cooing Surface treatment Phosphating Rain curtains Foam contro Foam spraying Lubrication Fiter ceaning Spray

More information

Lintra-Lite Actuators Series A44000, Rodless Cylinders Double Acting

Lintra-Lite Actuators Series A44000, Rodless Cylinders Double Acting Section 11 Lintra-Lite Actuators Series A44000, Rodess Cyinders Doube Acting LINTRA -LITE Series A44000 Rodess Cyinders Series A44000 Features...ACT-11-2 Series A44000 Specifications...ACT-11-3 Series

More information

How to Order. Auto switch. Without auto switch (Built-in magnet) Applicable Auto Switches/Refer to p for further details. Indicator.

How to Order. Auto switch. Without auto switch (Built-in magnet) Applicable Auto Switches/Refer to p for further details. Indicator. Compact Side Series MXU How to Order MXU A90V S Compact side Bore size 1 ø ø ø1 1 2 Stroke mm mm 1mm mm 2mm mm Number of auto switches 2 Auto switch S 1 Without auto switch (Buit-in magnet) Appicabe Auto

More information

PROTECTRON MACHINED CONTACT CONNECTORS

PROTECTRON MACHINED CONTACT CONNECTORS PROTECTRON MACHINED CONTACT CONNECTORS PROTECTRON INTRODUCTION INNER CLIP The inner cip consists of 4 Leaf Springs, stamped and rounded to take strip/round mae contacts at the bottom edge, faciitating

More information

Manifold Technology.

Manifold Technology. ----------------------------------------------------- 2017.2 Manifod Technoogy. made in Germany I Epkg. unitrything UNDER CONTROL. Manifod Technoogy - I BEULCO heating and cooing manifods made of high-quaity

More information

RNFTL A5 S RS2510A20. Rolled ball screws B256

RNFTL A5 S RS2510A20. Rolled ball screws B256 oe ba screws -I-6.5 oe a Screw Series (1) Prouct cassification NSK roe ba screws are cassifie by nut moe as shown in abe I-6.4. abe I-6 4 Cassification of roe ba screws moe shape ecircuation system cassification

More information

CHECK VALVE P.147 SWING CHECK VALVE P.149 WAFER CHECK VALVE P.151 BALL CHECK VALVE P.153 TRUE UNION BALL CHECK VALVE P.155 BALL FOOT VALVE

CHECK VALVE P.147 SWING CHECK VALVE P.149 WAFER CHECK VALVE P.151 BALL CHECK VALVE P.153 TRUE UNION BALL CHECK VALVE P.155 BALL FOOT VALVE CHECK VAVE P.47 P.49 P.5 P.53 P.55 SWING CHECK VAVE WAFER CHECK VAVE BA CHECK VAVE TRUE UNION BA CHECK VAVE BA FOOT VAVE 45 PERFORMANCE OF SWING CHECK VAVE, BA CHECK VAVE, AND BA FOOT VAVE Min. Pressure

More information

CHECK VALVE P.147 SWING CHECK VALVE P.149 WAFER CHECK VALVE P.151 BALL CHECK VALVE P.153 TRUE UNION BALL CHECK VALVE P.155 BALL FOOT VALVE

CHECK VALVE P.147 SWING CHECK VALVE P.149 WAFER CHECK VALVE P.151 BALL CHECK VALVE P.153 TRUE UNION BALL CHECK VALVE P.155 BALL FOOT VALVE CHECK VAVE P.147 P.149 P.151 P.153 P.155 SWING CHECK VAVE WAFER CHECK VAVE BA CHECK VAVE TRUE UNION BA CHECK VAVE BA FOOT VAVE 145 PERFORMANCE OF SWING CHECK VAVE, BA CHECK VAVE, AND BA FOOT VAVE Min.

More information

DC GEARED MOTOR MOTOR CATALOG

DC GEARED MOTOR MOTOR CATALOG DC GEARED MOTOR MOTOR CATAOG ' DC MOTOR SPECIFICATIONS SPEED AND OAD CHARACTERISTICS NOOAD SPEED WORKABE AREA OCKED ROTOR CONDITION AS APPIED VOTAGE WI BE CHANGED The relationship between torque vs speed

More information

S.B. 469 for information on GM applications). Both styles are shown in Figure 1. Figure 1

S.B. 469 for information on GM applications). Both styles are shown in Figure 1. Figure 1 NO: 4263132 SERVICE BULLETIN DATE: January X,1993 Supersedes: S.B. 426R dated 11/7/89 SUBJECT: ZERO-CLEARAN CE GOVERNOR WEIGHT RETAINER ASSEMBLIES In June 1988, Stanadyne introduced a zero-cearance Eastomer

More information

Pneufit C composite and Pneufit M fittings Inch

Pneufit C composite and Pneufit M fittings Inch Pneufit composite and Pneufit M fittings Inch Ø 1/8... 1/2 O/D tube Norgren Pneufit fittings are ready to use, offering fast assembly with no need for tools providing optimum flow. Pneufit offers a broad

More information

Instrument Thread Fittings. High Technology Valve & Fitting Series

Instrument Thread Fittings. High Technology Valve & Fitting Series igh Technology Valve & Fitting Series ow To Order IN - 8 NR - SS IRN - 8-6N - B INSTRUMNT TRD FITTINGS FITTING TYP PIP TRD SIZ PIP TRD TYP MTRI Pressure Ratings Size Designator 2 4 6 8 2 6 20 24 32 Size

More information

HAM-LET PRECISION INSTRUMENT PIPE FITTINGS

HAM-LET PRECISION INSTRUMENT PIPE FITTINGS HAM-E PRECISION INSRUMEN PIPE FIINGS PRECISION INSRUMENAION PIPE FIINGS GENERA HAM-E Group is pleased to introduce its line of Precision Instrument Pipe Fittings. he Pipeline range of connectors is manufactured

More information

Precision Ground Plates and Flat Bars. Lifting and Clamping Devices. Ground Precision Components. Elastomer-Bars, -Sheets, -Sections

Precision Ground Plates and Flat Bars. Lifting and Clamping Devices. Ground Precision Components. Elastomer-Bars, -Sheets, -Sections A B C D E F G H J K L Die Sets Precision Ground Pates and Fat Bars Lifting and Camping Devices Shanks, ifter studs, eyebots Camping caws, screws and bots Guide eements Ground Precision Components Springs

More information

Item 501M. 3-Way Metal Seated Ball Valve. ASME 150/ 300 & 800 psi SIZE: 1/2"-2"

Item 501M. 3-Way Metal Seated Ball Valve. ASME 150/ 300 & 800 psi SIZE: 1/2-2 Item M 3-Way Metal Seated Ball Valve ASME / 300 & 800 psi : -" ZIPSON'S M type, 3-way metal seated ball valve is a totally unique valve design for critical working condition of high working temperature

More information

P0440. Plastic Head Knurled Thumb Screws. Screws d 4 d 1 d 2. d 3. h 2 h 1. l 1

P0440. Plastic Head Knurled Thumb Screws. Screws d 4 d 1 d 2. d 3. h 2 h 1. l 1 Thumb Pastic Head Knured Thumb 0.5 2 d 4 P0440 1 Thermopastic (PA), back knob. Thread stainess stee (A2) or stee (zinc-pated). Technica Notes Temperature resistant from -30 C to +80 C. Order No. 1 d 4

More information

Any switch configuration

Any switch configuration Series L2 Rotary Cam es Attractive design, reiabe operation and high quaity for any appication up to 25 Amps TIP! Sprecher + Schuh s comprehensive ine of L2 rotary cam switches are avaiabe for a contro

More information

60 Series Tube Fittings and Tubing

60 Series Tube Fittings and Tubing 60 Series Fittings and ubing 60,000 psi (4137 bar) FIOK Group FIOK GmbH (Headquarter) Sprendlinger andstr. 115, 63069 Offenbach am Main, Germany el.: +49 69 8900 4498 Fax: +49 69 8900 4495 FIOK, Inc. 13843

More information

Linear Slot Diffusers Series

Linear Slot Diffusers Series Linear Sot iffusers 5000 Series Linear Sot iffusers 5000 Series The Series 5000 Linear Sot Ceiing iffuser has been speciay designed to provide both the unobtrusive appearance required for architectura

More information

Instrument Thread Fittings High Technology Valve & Fitting Series

Instrument Thread Fittings High Technology Valve & Fitting Series igh Technology Valve & Fitting Series ow To Order IN - 8 NR - SS IRN - 8-6N - B INSTRUMNT TRD FITTINGS FITTING TYP PIP TRD SIZ PIP TRD TYP MTRI Pressure Ratings Size Designator 2 4 6 8 2 6 20 24 32 Size

More information

PERFORMANCE AND KNOW-HOW

PERFORMANCE AND KNOW-HOW Linear and Motion Soutions PERFORMANCE AND KNOW-HOW Nadea represents 50 years of neede and cam foower bearing know-how. Our ong history in design and manufacturing has extended over the years to the products

More information

GEAR PUMPS. Displacement from 7 to 51 ccm Pressure up to 260 bar QHD0. Speed from 350 to 3400 RPM

GEAR PUMPS. Displacement from 7 to 51 ccm Pressure up to 260 bar QHD0. Speed from 350 to 3400 RPM GEA PUMPS Dispacement from 7 to 51 ccm Pressure up to 260 bar QHD0 Speed from 350 to 3400 PM Gear Pump Cataogue QHD0 TABE OF CONTENTS DESCIPTION......................................................................................................................

More information

Displacement from 43 to 150 ccm Pressure up to 280 bar Speed from 250 to 3200 RPM GEAR PUMPS QHD2

Displacement from 43 to 150 ccm Pressure up to 280 bar Speed from 250 to 3200 RPM GEAR PUMPS QHD2 Dispacement from 43 to 150 ccm Pressure up to 280 bar Speed from 250 to 3200 PM GEA PUMPS QHD2 Gear Pump Cataogue QHD2 TABE OF CONTENTS BASIC DESCIPTION.............................................................................................................

More information

BALL valve FLOATING BALL VALVE

BALL valve FLOATING BALL VALVE BA valve FOATING BA VAVE BA VAVE APPICATION Because of their excellent operating characteristics, ball valves are used for the broadest spectrum of isolation applications and are available in a wide range

More information

VACUUM. Technology. Vacuum wands Accessories. l l

VACUUM. Technology. Vacuum wands Accessories. l l Technoogy VACUUM Vacuum wands Accessories Windrush Technoogy Ltd. Te: +44 1993 774499. Fax: +44 870 123 6263. Emai: enquiries@windrush.net 1 Vacuum wands Features The unique vave* ensures reiabe suction

More information

Thread Direction R = Right hand L = Left hand (Not Available for Micro Series) (Refer to leadscrew. Code. availability)

Thread Direction R = Right hand L = Left hand (Not Available for Micro Series) (Refer to leadscrew. Code. availability) Kerk onventiona s: FW Series Free Wheeing Kerk FW Series conventiona stye, without anti-backash function. The Kerk FW Series genera purpose free-wheeing nut is for appications not requiring anti-backash

More information

Griplok. Tube Fittings. Quality Instrumentation Fittings

Griplok. Tube Fittings. Quality Instrumentation Fittings ube ittings Quality Instrumentation ittings ompany Information 1926 SSP ittings orp. is founded in leveland, Ohio, U.S.. SSP begins as a contract manufacturer of screw machine products in brass and carbon

More information

CNA. Series. Cylinder with Lock. Suitable for intermediate stops, emergency stops and drop prevention. ø40, ø50, ø63, ø80, ø100

CNA. Series. Cylinder with Lock. Suitable for intermediate stops, emergency stops and drop prevention. ø40, ø50, ø63, ø80, ø100 Suitabe for intermediate stops, emergency stops and drop prevention Simpe construction force magnifying mechanism is empoyed based on the wedge effect of the taper ring and stee bas. Cyinder with Lock

More information

Overview. The MicorTIG series at a glance

Overview. The MicorTIG series at a glance www.orch.com.au Overview Lorch, word-eading, new, a in one resonance technoogy that enabes the next generation of portabe machines to operate from mains suppy, sma generators and batteries a deivering

More information

COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 2 MM THROUGH 50 MM

COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 2 MM THROUGH 50 MM OMPRSSION U IINS 1/16 ROU 2 2 MM ROU 50 MM L-LOK U IINS SRIPION L-LOK O OS I ORK? he L-LOK tube fitting is a mechanism used both to seal and to grip tubing. he mechanical advantage and geometry of this

More information

Section L Accessories

Section L Accessories Section L Tabe of Contents QuickJet and UniJet Spray Nozze Systems/Components QuickJet Spray Nozze Systems...L2 UniJet Spray Nozze Systems........... L2 Standard QuickJet Bodies...L3 ProMax QuickJet Bodies...L3

More information

PRECISION PUMP APPLICATOR

PRECISION PUMP APPLICATOR User s Manua nstaation & Operating nstructions PRECSON PUMP APPLCATOR For Box, Junior, and Custom Appicators For questions and/or product support contact the TW ROCOL North America Customer Service Department

More information

Table Of Contents. Assembly Instructions. Identification of Sync-Lok Tube Fittings. Reducing Port Connector 36. Male Elbow 11

Table Of Contents. Assembly Instructions. Identification of Sync-Lok Tube Fittings. Reducing Port Connector 36. Male Elbow 11 able Of Contents eneral Information 1 Union Cross 27 Ordering Information 3 Reducer 28 ube Selection Data 5 Bulkhead Reducer 29 Male Connector 7 Male Adapter 31 Male Bore hrough Connector 9 emale Adapter

More information

Rotary Cam Switches. Rotary Cam Switches

Rotary Cam Switches. Rotary Cam Switches Rotary Cam es Series... 2 Hande Assembies... 8 Accessories... 12 Circuit Diagrams, Technica Information & Dimensions (Onine)... 13 Series R-Line Rotary Cam es... 24 Handes and Accessories... 27 Circuit

More information

GLOBE VALVE APPLICATION

GLOBE VALVE APPLICATION SPECIFICATION GOBE VAVE APPICATION Globe valves are primarily use as control valves where throttling or both throttling an shut-off are require. Globe valves can also be use for on-off service; however,

More information

30 Electric ding. IMPORTANT: Read and save these instructions. ALL RANGES CAN TIP INJURY TO PERSONS COULD RESULT SEE INSTALLATION INSTRUCTIONS

30 Electric ding. IMPORTANT: Read and save these instructions. ALL RANGES CAN TIP INJURY TO PERSONS COULD RESULT SEE INSTALLATION INSTRUCTIONS Part No. 9752387 ALL RANGES CAN TIP INJURY TO PERSONS COULD RESULT INSTALL ANTI-TIP DEVICE PACKED WITH RANGE SEE INSTALLATION INSTRUCTIONS 30 Eectric ding IMPORTANT: Read and save these instructions. IMPORTANT:

More information

Precision Mounted Points

Precision Mounted Points Precision Mounted Points Master MOUNTED POINTS Quaity Assured Perfecty concentric and uniform Securey fixed to shank Versatie appication Comprehensive range Master Abrasives UK Ltd High March, Long March

More information

Displacement from 10 to 100 ccm Pressure up to 300 bar Speed from 300 to 3200 RPM GEAR PUMPS QHD1

Displacement from 10 to 100 ccm Pressure up to 300 bar Speed from 300 to 3200 RPM GEAR PUMPS QHD1 Dispacement from 10 to 100 ccm Pressure up to 300 bar Speed from 300 to 3200 PM GEA PUMPS QHD1 Gear Pump Cataogue QHD1 TABE OF CONTENTS DESCIPTION......................................................................................................................

More information

Unimotor hd 230 V 460 V Unimotor hd 230 V 460 V Compact, Powerful High Dynamic AC Servo Motors

Unimotor hd 230 V 460 V Unimotor hd 230 V 460 V Compact, Powerful High Dynamic AC Servo Motors Unimotor hd 230 V 460 V Unimotor hd 230 V 460 V Compact, owerful igh ynamic AC Servo Motors Compact, owerful igh ynamic AC Servo Motors esigned for maximum torque density, the Unimotor hd brushless AC

More information

Geberit Mapress. Product Guide and Price List. Valid from 1 May 2017 (Prices exclusive of VAT)

Geberit Mapress. Product Guide and Price List. Valid from 1 May 2017 (Prices exclusive of VAT) eberit Mapress Prouct uie an Price ist Vai from 1 May 2017 (Prices excusive of VAT) eberit Mapress Stainess Stee eberit Mapress Carbon Stee eberit Mapress Copper eberit Pipe Vave Fittings Appenix Swiss

More information

1

1 www.systems-sunight.com 1 2 www.systems-sunight.com SUNLIGHT s motive power (traction) batteries motivate your business, as they provide reiabe energy to your industria vehices every day. SUNLIGHT s speciaized

More information

Ball valve are designed, constructed and tested according to API-6D standards.

Ball valve are designed, constructed and tested according to API-6D standards. A VAVE DESIGN AND TEST all valve are designed, constructed and tested according to APID standards. DOUE OCK AND EED All trunnion mounted type ball valve employ a sealing principle that facilitates all

More information

New Higher Pressure Rating

New Higher Pressure Rating New igher Pressure Raing Specificaions Sizes: " 8" Modes: anged (ANSI) Connecion Ony ever and Weigh Opion Bodies: I-PVC, and Seas: EPDM, KM, PTE Sea: EPDM, KM, PTE Sandard eaures (Sizes " 8") Minimum fow

More information

Shaft Locking Devices

Shaft Locking Devices abe of Contents JW Shaft ocking evices In his Section: Sef-Centering Series SS ow orque Series SS Meium orque Series SS High orque Series SS Heavy uty Series SS S www.ovejoy-inc.com 425 S-1 abe of Contents

More information

SPECIFICATIONS & INSTALLATION GUIDE ANOTHER QUALITY PRODUCT BY FORZA GLOBAL STAINLESS V PRESS EDITION: 0001

SPECIFICATIONS & INSTALLATION GUIDE ANOTHER QUALITY PRODUCT BY FORZA GLOBAL STAINLESS V PRESS EDITION: 0001 STAINESS V PRESS SPECIFICATIONS & INSTAATION GUIDE ANOTHER QUAITY PRODUCT BY FORA GOBA EDITION: 0001 G O B A World Force In Plumbing Systems Forza Global in partnership with one of the world s leading

More information

Accessories 95. Dust caps, Dust plugs Air blowers 94. Air guns 95. Threaded hose connectors, Revolving connectors 96. page.

Accessories 95. Dust caps, Dust plugs Air blowers 94. Air guns 95. Threaded hose connectors, Revolving connectors 96. page. Accessories 95 page Dust caps, Dust pugs 92-93 Air bowers 94 Air guns 95 Threae hose connectors, Revoving connectors 96 Accessoires 96 Pastic version Soft-PVC Poyurethane Dust caps Dust pugs Materias ow

More information

Standard Quick-Disconnect Couplings Series ES one-way shut-off DN 7.2

Standard Quick-Disconnect Couplings Series ES one-way shut-off DN 7.2 Stanar Quick-Disconnect Coupings Series ES one-way shut-off Materias a PN 35 bar -20 C +100 C air a.o. 7,2 ISO 228/DIN 2999/DIN 13 1100 L/min yes 1-way Eur. Stanar wor-wie 10 Coupings with mae threa Threa

More information

Innovation. Simplicity. is Simply Better. Rotary Lobe Pumps

Innovation. Simplicity. is Simply Better. Rotary Lobe Pumps Innovation Simpicity is Simpy Better Rotary Lobe Pumps So simpe, yet so diverse. Pease add. Six series with 19 sizes. AL-series PL-series CL-series FL-series EL-series XL-series A pump modes are manufactured

More information

Cylinder with Lock. CNS Series

Cylinder with Lock. CNS Series yinder with Lock S Series ø, ø, ø ocking cyinder idea for intermediate stops, emergency stops and drop prevention. Simpe construction force magnifying mechanism is empoyed based on the wedge effect of

More information

EPSM / EPSW. PN Coated End Mills for Machining of Stainless Steels FEATURES. Innovative cutting edge design increases tool life

EPSM / EPSW. PN Coated End Mills for Machining of Stainless Steels FEATURES. Innovative cutting edge design increases tool life EPSM / EPSW PN Coated End Mis for Machining of Stainess Stees FEATURES Innovative cutting edge design increases too ife New PN coating exhibits exceent adhesion and wear resistance EPSM: For both roughing

More information

Contents. Tandembox Drawers. CLIPtop Blumotion Page 1. D Height Page 17. Tandembox Drawers. CLIPtop Hinges Page 2.

Contents. Tandembox Drawers. CLIPtop Blumotion Page 1. D Height Page 17. Tandembox Drawers. CLIPtop Hinges Page 2. B u m S t o c k P r o g r a m Contents CLIPtop Bumotion Page 1 Tandembox Drawers D Height Page 17 CLIPtop Hinges Page 2 Tandembox Drawers K Height Page 18 TIP-ON for Tandembox. CLIP Base Pates Page 6 Servo

More information

ANTILOCK BRAKE SYSTEM

ANTILOCK BRAKE SYSTEM SECTION 4F ANTILOCK BRAKE SYSTEM Caution: Disconnect the negative battery cabe before removing or instaing any eectrica unit or when a too or equipment coud easiy come in contact with exposed eectrica

More information

FLANGES FLANGES.

FLANGES FLANGES. FANGES FANGES 26 Available Materials Stainless Steel A182 F304/, 304 F310, 310 F316/, 316 F317/ F321/ F347/ F51 F53 F904 F44 (254SMO) Duplex & Super Duplex A182 F51, F53, F55, F60 Nickel-base Alloy Alloy200,

More information

n Section for connecting rigid or flexible conductors (with Starfix ferrules) Distribution Blocks Four pole Equipped with 4 bars

n Section for connecting rigid or flexible conductors (with Starfix ferrules) Distribution Blocks Four pole Equipped with 4 bars www.kinkmann.com moduar distribution bocks 40 to 0 moduar distribution bocks 40 to 0 048 76 + 048 46 048 77 Technica characteristics (p. 2) Standard distribution Connection with or without Starfix ferrues

More information

Fasteners Inc. innovative fastener solutions TOOLS CATALOG. "Quality The First Time"

Fasteners Inc. innovative fastener solutions TOOLS CATALOG. Quality The First Time Fasteners Inc. innovative fastener solutions TOOS CATAOG "Quality The First Time" WHO WE ARE GOEBE FASTENERS INC. is a subsidiary of GOEBE GmbH, which has been the leading corporation in Europe for specialty

More information

Mechanical Level Switches

Mechanical Level Switches Mechanica Leve Switches SOR mechanica eve switches are rugged, industria products specificay designed for versatiity of appication. This cataog contains appication and ordering data for foat and dispaceroperated

More information

NEWAY VALVE. Complete Solutions for Engineered Valves. Distributed by:

NEWAY VALVE. Complete Solutions for Engineered Valves. Distributed by: Cat.no.:EGGC Forged Steel Valves Complete Solutions for Engineered Valves Cat.no.:EPV Cat.no.:EAV istributed by: No. Xiangjiang Road, Suzhou New istrict,p.r. China Post Code: Tel: Fax: 0 EMail: neway@neway.com.cn

More information

Components for. Overhead Cranes. Sta dard n. Engineered. Hoists. Endtrucks. Crane Kits. Engineered Material Handling

Components for. Overhead Cranes. Sta dard n. Engineered. Hoists. Endtrucks. Crane Kits. Engineered Material Handling Engineered Materia Handing Components for Overhead Cranes Sta dard n Hoists Engineered Hoists Endtrucks Crane Kits Troey drive consists of singe speed squirre-cage gear motors. Integra disc brakes are

More information

INSTALLATION INSTRUCTION ALL FLANGED RUBBER EXPANSION JOINTS

INSTALLATION INSTRUCTION ALL FLANGED RUBBER EXPANSION JOINTS INSTALLATION INSTRUCTION ALL FLANGED RUBBER EXPANSION JOINTS Rubber expansion joints are avaiabe in two ready to fit versions with standard connections according to DIN, ASA, BS, etc. Rotatabe stee fanges

More information

Fenix TK65R Flashlight

Fenix TK65R Flashlight BrightGuy.com is an authorized Fenix Distributor Fenix TK65R Fashight 1. Cataput action bet cip 2. Quick-reease button Technica Parameters ANSI/PLATO Genera Mode Fash Mode FL1 Turbo High Med Low Eco Strobe

More information

30E10: ASME Class Stainless Steel Ball Valve 2-Piece Flanged End Stainless Steel Full Port Direct Mount Actuation Design

30E10: ASME Class Stainless Steel Ball Valve 2-Piece Flanged End Stainless Steel Full Port Direct Mount Actuation Design 3E1: ASME lass 3 - Stainless Steel Ball Valve 2-Piece Flanged End Stainless Steel Full Port Direct Mount Actuation Design SANDARD SPEIFIAIONS General Description 2 Piece ASME 3 Stainless Steel Ball Valve

More information

/1505-I-20 TOO L HO L DERS 2015 GM 300

/1505-I-20 TOO L HO L DERS 2015 GM 300 TO O L H O L D ERS A N D C L A M PI N G D E V I C ES 114 996/1505-I-20 ED I T I O N 2015 TOO L HO L DERS 2015 GM 300 high camping ce PERFECT CONCENTRICITY MAXIMUM OPERATIONAL SAFETY OPTIMAL COOLANT DELIVERY

More information

Metric One-Touch Fittings

Metric One-Touch Fittings Metric One-ouch Fittings pplicable tube material pplicable tube O.D (mm) With Sealant SQH 1/ 1/ Soft 3/ olyurethane ф ф ф ф ф SQ 1/ 1/ Soft 3/ olyurethane SQ 1/ 1/ Soft 3/ olyurethane SQY 1/ 1/ Soft 3/

More information

10E10: ASME Class Stainless Steel Ball Valve 2-Piece Flanged End Stainless Steel Full Port Direct Mount Actuation Design

10E10: ASME Class Stainless Steel Ball Valve 2-Piece Flanged End Stainless Steel Full Port Direct Mount Actuation Design 1E1: ASME lass 15 - Stainless Steel Ball Valve 2-Piece Flanged End Stainless Steel Full Port Direct Mount Actuation Design SANDARD SPEIFIAIONS General Description 2 Piece ASME 15 Stainless Steel Ball Valve

More information

ASSEMBLY AND INSTALLATION

ASSEMBLY AND INSTALLATION ASSEMBY AND INSTAATION STRAIGT AND EVE GUARDRAIING (using Tpes 10, 15, 20, 21, 25 & 26) Where: = distance between centres of uprights I = ength of horizonta tube = distance from ground to centre ine of

More information

ins LET-LOK (IMPERIAL) TUBE FITTINGS Page About Twin Ferrule Compression Fittings 2 Installation Instructions 3

ins LET-LOK (IMPERIAL) TUBE FITTINGS Page About Twin Ferrule Compression Fittings 2 Installation Instructions 3 ins bout win Ferrule Compression Fittings 2 nstallation nstructions 3 Conventions mperial Metric Page 4 32 ndex to et-ok mperial Fittings 4-5 -OK (MPR) UB FGS ndex to et-ok Metric Fittings 32-33 mm ndex

More information

gyrolok Gyrolok Tube Fittings

gyrolok Gyrolok Tube Fittings yrolok ube ittings yrolok itting ocator 2 yrolok eatures & enefits 4 yrolok esign 5 ow to Order 6 Pipe hread Information 7 S ittings Information 7 yrolok itting imensional & pplication ables 8 Replacement

More information