CHECK VALVE P.147 SWING CHECK VALVE P.149 WAFER CHECK VALVE P.151 BALL CHECK VALVE P.153 TRUE UNION BALL CHECK VALVE P.155 BALL FOOT VALVE

Size: px
Start display at page:

Download "CHECK VALVE P.147 SWING CHECK VALVE P.149 WAFER CHECK VALVE P.151 BALL CHECK VALVE P.153 TRUE UNION BALL CHECK VALVE P.155 BALL FOOT VALVE"

Transcription

1 CHECK VAVE P.47 P.49 P.5 P.53 P.55 SWING CHECK VAVE WAFER CHECK VAVE BA CHECK VAVE TRUE UNION BA CHECK VAVE BA FOOT VAVE 45

2 PERFORMANCE OF SWING CHECK VAVE, BA CHECK VAVE, AND BA FOOT VAVE Min. Pressure Uni : MPa{kgf/cm 2 }, Norma Temperaure mm inch 5 /2 20 3/ / / SWING CHECK VAVE BA CHECK VAVE, BA FOOT VAVE VERTICA PIPING HORIZONTA PIPING VERTICA PIPING HORIZONTA PIPING WHEN FUY SEAED WHEN AIR PASSES WHEN FUY SEAED WHEN AIR PASSES WHEN FUY SEAED WHEN AIR PASSES WHEN FUY SEAED WHEN AIR PASSES EPDM 0.02{0.2} 0.0{0.} 0.02{0.2} 0.0{0.} 0.02{0.2} 0.005{0.05} 0.02{0.2} 0.00{0.0} PTFE 0.03{0.3} 0.0{0.} 0.03{0.3} 0.0{0.} EPDM 0.02{0.2} 0.0{0.} 0.02{0.2} 0.0{0.} 0.03{0.3} 0.005{0.05} 0.03{0.3} 0.00{0.0} PTFE 0.035{0.35} 0.0{0.} 0.035{0.35} 0.0{0.} EPDM 0.03{0.3} 0.0{0.} 0.035{0.35} 0.0{0.} 0.03{0.3} 0.005{0.05} 0.03{0.3} 0.00{0.0} PTFE 0.05{0.5} 0.0{0.} 0.06{0.6} 0.0{0.} EPDM 0.03{0.3} 0.0{0.} 0.035{0.35} 0.0{0.} 0.03{0.3} 0.0{0.} 0.03{0.3} 0.002{0.02} PTFE 0.05{0.5} 0.0{0.} 0.06{0.6} 0.0{0.} EPDM 0.03{0.3} 0.0{0.} 0.035{0.35} 0.0{0.} 0.03{0.3} 0.0{0.} 0.03{0.3} 0.002{0.02} PTFE 0.05{0.5} 0.0{0.} 0.06{0.6} 0.0{0.} EPDM 0.03{0.3} 0.0{0.} 0.035{0.35} 0.0{0.} PTFE 0.05{0.5} 0.0{0.} 0.06{0.6} 0.0{0.} EPDM 0.035{0.35} 0.0{0.} 0.04{0.4} 0.0{0.} 0.02{0.2} 0.0{0.} 0.02{0.2} 0.002{0.02} PTFE 0.055{0.55} 0.0{0.} 0.06{0.6} 0.0{0.} EPDM 0.035{0.35} 0.0{0.} 0.04{0.4} 0.0{0.} 0.02{0.2} 0.0{0.} 0.02{0.2} 0.002{0.02} PTFE 0.06{0.6} 0.0{0.} 0.065{0.65} 0.0{0.} EPDM 0.035{0.35} 0.0{0.} 0.04{0.4} 0.0{0.} PTFE 0.06{0.6} 0.0{0.} 0.065{0.65} 0.0{0.} EPDM 0.04{0.4} 0.05{0.5} 0.045{0.45} 0.0{0.} PTFE 0.065{0.65} 0.05{0.5} 0.07{0.7} 0.0{0.} EPDM 0.04{0.4} 0.02{0.2} 0.045{0.45} 0.05{0.5} PTFE 0.07{0.7} 0.02{0.2} 0.07{0.7} 0.05{0.5} TEST METHOD [Verica piping] [Horizona piping] Measure he minimum pressure require for air o pass hrough or o be seae. PERFORMANCE OF WAFER CHECK VAVE Min. Seaing Pressure & Operaing Pressure (Hyrauic Pressure) Uni : MPa{kgf/cm 2 } mm inch STANDARD MODE SPRING MODE VERTICA PIPING HORIZONTA PIPING VERTICA PIPING HORIZONTA PIPING MIN. SEAING PRESSURE OPERATING PRESSURE MIN. SEAING PRESSURE OPERATING PRESSURE MIN. SEAING PRESSURE OPERATING PRESSURE MIN. SEAING PRESSURE OPERATING PRESSURE {0.2} {0.007} 0.02 {0.2} {0.0007} 0.02 {0.2} {0.04} 0.02 {0.2} {0.0007} {0.07} {0.007} {0.07} {0.0007} {0.07} {0.04} {0.07} {0.0007} TEST METHOD [Verica piping] [Horizona piping] Fui fow Arrow Fui fow 46

3 CHECK VAVE / SWING CHECK VAVE SWING CHECK VAVE PREVENTS FUID BACKFOW AND PROTECTS PUMP FACIITIES ARM-TYPE CHECK VAVE PREVENTS FUID RESISTANCE INCREASE. A-PASTIC MATERIA PROVIDES HIGH RESISTANCE TO CORROSIVE FUID INCUDING ACID AND AKAI. INTERNA MAINTENANCE ONY REQUIRES REMOVA OF BONNET. BASIC SPECIFICATIONS VAVE TYPE SWING CHECK VAVE SIZE 5 mm-200 mm (/2 inch-8 inch) MANUA BODY MATERIA HI-PVC SEA MATERIA / SEAT EPDM FKM PTFE Vifon F FKM-F Vifon C FKM-C CONNECTION / FANGED JIS5K, JIS0K, DIN, ANSI HIGH PURITY SERIES UBRICANT FREE FUID TEMPERATURE MAXIMUM WORKING PRESSURE (NORMA TEMPERATURE) MPa{kgf/cm 2 } 5mm 80mm 00mm 50mm 200mm HI-PVC 0 ~ 50.0{0.2} 0.7{7.} 0.5{5.} - 20 ~ 80.0{0.2} 0.7{7.} 0.5{5.} - 20 ~ 00.0{0.2} 0.7{7.} 0.5{5.} NOTE The maximum working pressure is he vaue incuing he waer hammer pressure. Be carefu ha he maximum working pressure is no exceee uring use. Concerning he aowabe pressure for each emperaure an maeria, see he echnica ocumens a he en of his caaog. NOTES FOR PIPING They can be use for boh horizona an verica pipes, bu make sure uring insaaion ha he arrow irecion of he vave boy is aigne wih he fow irecion of he fui. NOTES FOR USE If foreign maer such as us is mixe in he fui, he vave may no funcion propery. The pug (P/N 4 ) is no a rain pug for waer remova. Do no remove he pug o ischarge waer since he vave may become unabe o work propery. PARTS IST MANUA HI-PVC, 5 mm, 20 mm 25 mm 200 mm X X X X X-X PART NO. / NAME QTY MATERIA BODY HI-PVC, 2 BONNET HI-PVC, 3 SHAFT HI-PVC, 4 PUG HI-PVC, 5a DISC HI-PVC, 5b SEAT HODER HI-PVC, 5c BOT (A) (4) - HI-PVC, 5 ARM (4) HI-PVC, PART NO. / NAME QTY MATERIA 5f NUT (A) (4) HI-PVC, 5g PIN (3) HI-PVC, 5h BOT (B) () HI-PVC, 5i NUT (B) () HI-PVC, 5j SEAT 5k O-RING (A) () 7 GASKET (B) 8 O-RING (B) GASKET SEAT O-RING (B) O-RING (A) EPDM EPDM FKM FKM PTFE PFA (2) 5e WASHER (4) HI-PVC, 9 BOT/NUT (4) - SUS304 5i 5b 5j 5a 5k 5h 5c 5b 5j 5a 5e 5f 5g NOTES () Use for 5 mm an 20 mm. (2) FKM + PFA coaing. (3) Use for he maeria of an sizes of 65 o 200 mm. (4) Use for 25 o 200 mm. 5 mm, 20 mm 25 mm 200 mm a 3 5 X X X X X-X PART NO. / NAME QTY MATERIA BODY 2 BONNET 3 SHAFT 4 PUG 5a DISC 5b SEAT HODER 5c BOT (A) (3) - 5 ARM (3) PART NO. / NAME QTY MATERIA 5g PIN (2) 5h BOT (B) () 5i NUT (B) () 5j SEAT 5k O-RING (A) () 7 GASKET (B) 8 O-RING (B) GASKET SEAT O-RING (B) O-RING (A) EPDM EPDM FKM FKM 9 BOT/NUT (3) - SUS304 5e WASHER (3) a BODY RING () SUS304 5f NUT (A) (3) 5i 5b 5j 5a 5k 5h 5c 5b 5j 5a 5e 5f 5g NOTES () Use for 5 mm an 20 mm. (2) Use for 65 o 200 mm. (3) Use for 25 o 200 mm. 47

4 PRODUCT MODE CODE IST MANUA ACTUATION V TYPE SC BONNET SEA OR BODY MATERIA SEA MATERIA CONNECTION F STANDARD SIZE HIGH PURITY SERIES V MANUA VAVE SC SWING OR O-RING I HI-PVC E EPDM F FANGED P V FKM F P PTFE/PFA 3 PTFE/Vifon -F 4 PTFE/Vifon -C When he sea maeria is EPDM or FKM, he maeria of O-ring is he same as ha of he sea. When he sea maeria is PTFE, he maeria of O-ring is PFA coaing or Vifon. JIS0K 5 JIS5K D DIN A ANSI 05 5mm mm MANUA HI-PVC, 5 mm, 20 mm 25 mm 200 mm 5 mm, 20 mm 25 mm 200 mm Hexagon, WAF: 36 φ Hexagon, WAF: 36 φ φd D φd φd H H H H UBRICANT FREE NOTES 5 mm ype is processe from 20 mm. 32 mm ype is processe from 40 mm. Conac us regaring he combinaion of boy maeria an sea maeria PTFE/PFA. SWING CHECK VAVE TYPE VSCOR CONNECTION / FANGED JIS, DIN, ANSI n-φh n- h n-φh n-φh JIS, DIN (Uni: mm) JIS5K JIS0K DIN PN0 mm H HI-PVC D C n h D C n h D C n h ANSI (Uni: inch) ANSI Cass50 inch mm H HI-PVC D C n h / / / / /

5 CHECK VAVE / WAFER CHECK VAVE WAFER CHECK VAVE STRENGTH CONCERNS OF PASTIC WAFER CHECK ARE RESOVED USING STRESS ANAYSIS. CORROSION RESISTANCE IS IMPROVED BY A-PASTIC WETTED PART AND COATED SPRING. WEIGHT IS /3 TO /5 OF THAT OF META TYPE. STOER-INTEGRATED STRUCTURE EIMINATES THE USE OF GASKET DURING PIPING, AOWING COST REDUCTION. BASIC SPECIFICATIONS VAVE TYPE WAFER CHECK VAVE SIZE 80 mm-300 mm (3 inch-2 inch) BODY MATERIA MANUA SEA MATERIA / O-RING EPDM FKM CONNECTION / WAFER JIS0K, DIN, ANSI OPTION SPRING RETURN WITH DRAIN PUG FUID TEMPERATURE MAXIMUM WORKING PRESSURE (NORMA TEMPERATURE) MPa{kgf/cm 2 } 80mm 200mm 250mm, 300mm 0 ~ 50.0{0.2} 0.6{6.} NOTES The maximum working pressure is he vaue incuing he waer hammer pressure. Be carefu ha he maximum working pressure is no exceee uring use. Concerning he aowabe pressure for each emperaure an maeria, see he echnica ocumens a he en of his caaog. NOTES FOR USE The maximum working pressure is he vaue incuing he waer hammer pressure. Be carefu ha he maximum working pressure is no exceee uring use. The wafer check vave is mos suie for waer an sea waer ines. When i is use for a chemica ine, conac us o check he chemica resisance. They can be use for boh horizona an verica pipes, bu make sure uring insaaion ha he arrow irecion of he vave boy is aigne wih he fow irecion of he fui. PARTS IST MANUA 25 mm (5 ), 50 mm (6 ), 250 mm (0 ), 300 mm (2 ) 80 mm (3 ), 00 mm (4 ), 200 mm (8 ) Cener of fange Cener of fow passage 2 Fow irecion 3 PART NO. / NAME QTY MATERIA BODY 2 DISC 3 STOER 4 SHAFT NOTE () No use for sanar ype. PART NO. / NAME QTY MATERIA 5 PUG 6 BOT 2 7 EYE BOT SS400 (Unichrome paing) 8 SPRING () SWP-B (ETFE COATING) PART NO. / NAME QTY MATERIA 9 O-RING (A) 3 EPDM, FKM 0 O-RING (B) EPDM, FKM O-RING (C) EPDM, FKM 49

6 PRODUCT MODE CODE IST MANUA ACTUATION V TYPE WC OPERATING SYSTEM ZZ BODY MATERIA U SEA MATERIA CONNECTION W STANDARD SIZE OPTION V MANUA VAVE WC WAFER CHECK ZZ NONE U E EPDM W WAFER V FKM D DIN A ANSI JIS0K mm mm - STANDARD 067 SPRING RETURN 0ZZ WITH DRAIN PUG MANUA WAFER CHECK VAVE TYPE VWCZZ CONNECTION / WAFER JIS, ANSI, DIN 25 mm (5 ), 50 mm (6 ), 250 mm (0 ), 300 mm (2 ) 80 mm (3 ), 00 mm (4 ), 200 mm (8 ) E n n Cener of fange Cener of fow passage Fow irecion (Cener of fow passage) φd (Cener of fange) E JIS, DIN (Uni: mm) JIS0K DIN PN0 mm D C n C n ANSI (Uni: inch) ANSI Cass50 inch mm D C n

7 CHECK VAVE / BA CHECK VAVE BA CHECK VAVE PASTIC VAVE WITH HIGH RESISTANCE TO BOTH INTERNA AND EXTERNA CORROSION CAUSED BY SEA WATER, VARIOUS ACIDS AND AKAIS AND OTHER CHEMICAS. FOW PASSAGE STRUCTURE WITH OW FUID RESISTANCE SMA PARTS QUANTITY AND A SINGE CONNECTION REDUCE EXTERNA STRESS EFFECTS, AOWING HIGH FINISHING ACCURACY. IGHTWEIGHT AND SMA SIZE AOW INSTAATION IN NARROW SPACES AND FACIITATE DISASSEMBED CEANING. MANUA BASIC SPECIFICATIONS VAVE TYPE BA CHECK VAVE SIZE 5 mm-00 mm (/2 inch-4 inch) BODY MATERIA SEA MATERIA / SEAT EPDM FKM ec. CONNECTION / FANGED JIS5K, JIS0K, DIN, ANSI JIS, DIN, ANSI Rc, Rp, NPT HIGH PURITY SERIES UBRICANT FREE FUID MAXIMUM WORKING PRESSURE (NORMA TEMPERATURE) MPa{kgf/cm 2 } CONNECTION METHOD TEMPERATURE 5 mm 50 mm 80mm 00mm FANGED 0 ~ 50.0{0.2} 0.7{7.} 0 ~ 90.0{0.2} 0.7{7.} - 20 ~ 80.0{0.2} 0.5{5.} ~ 00.0{0.2} 0.7{7.} - NOTES The maximum working pressure is he vaue incuing he waer hammer pressure. Be carefu ha he maximum working pressure is no exceee uring use. Concerning he aowabe pressure for each emperaure an maeria, see he echnica ocumens a he en of his caaog. For fange ype 5-50 mm wih he boy maeria of or, rue union ba check vaves can be use. For eais, conac our saes office. NOTES FOR USE Make sure uring piping ha he arrow irecion of he vave boy is aigne wih he fow irecion of he fui. Do no use he vave in a ine where he fui fow is very urbuen. Osciaion of he ba may occur in he vave, causing breakage. Near pumps wih unsabe fow, use AV swing check vaves. PARTS IST MANUA FANGED a a PART NO. / NAME QTY MATERIA BODY PART NO. / NAME QTY MATERIA 8 STOP RING (B) (2) 2 BA 3 END CONNECTOR 4 UNION NUT 5 STOP RING (A) 6 TS FANGE (2) 7 PIPE (2) FANGED,,,,,,, 9 SEAT EPDM, FKM, ec. 4a RING () 2 SUS304 NOTES () Use for 5 o 25 mm for hreae ype. (2) Use for fange ype. 5

8 PRODUCT MODE CODE IST MANUA ACTUATION V TYPE BC OPERATING SYSTEM ZZ BODY MATERIA SEA MATERIA CONNECTION STANDARD SIZE HIGH PURITY SERIES NOTES V MANUA VAVE BC BA CHECK ZZ NONE an socke ypes are we ype. socke ype compaibe wih he JIS sanar is no avaiabe. U C P F E EPDM V FKM S N F FANGED P SPIGOT J JIS JIS0K 5 JIS5K D DIN A ANSI For 32 mm an 65 mm fange ypes, iniviua service may be avaiabe. Conac us for more eais. an fange ypes are no prouce. 05 5mm 00 00mm UBRICANT FREE MANUA BA CHECK VAVE TYPE VBCZZ CONNECTION / FANGED,, JIS, DIN, ANSI SPIGOT DIN FANGED n-φh 2 n-φh φd C P.C.D. φ C φd P.C.D. φ ' Taper /T Taper /T ' φ 2 2 JIS (Uni: mm) FANGED JIS5K JIS0K JIS B 0203 mm 2 2 D C n h D C n h /T / Rc / / Rc 3/ / Rc / Rc / / Rc / Rc / Rc DIN (Uni: mm) SPIGOT DIN 2999 DIN 3442 DIN 8063 DIN 6962 mm 2 3 ' Rp / Rp 3/ Rp Rp / Rp Rp Rp ANSI (Uni: inch) inch mm FANGED ANSI CASS 50 ANSI/ASME B ASTM SCH D C n h ' ' 2 / /2-4NPT / /4-4NPT /2 NPT / /2- /2NPT /2 NPT NPT NPT

9 CHECK VAVE / TRUE UNION BA CHECK VAVE TRUE UNION BA CHECK VAVE THE VAVE PARTS CAN BE REMOVED WITHOUT DISCONNECTING THE PIPES, BY OOSENING THE UNIONS ON BOTH SIDES BASIC SPECIFICATIONS VAVE TYPE TRUE UNION BA CHECK VAVE SIZE 5 mm-50 mm (/2 inch-2 inch) BODY MATERIA SEA MATERIA / SEAT EPDM FKM ec. CONNECTION / FANGED JIS5K,JIS0K,DIN, ANSI JIS,DIN, ANSI Rc,Rp, NPT MANUA SPIGOT DIN FUID TEMPERATURE MAXIMUM WORKING PRESSURE (NORMA TEMPERATURE) MPa{kgf/cm 2 } CONNECTION METHOD FANGED -20 ~ 00.0{0.2} -20 ~ 80.0{0.2} NOTES The maximum working pressure is he vaue incuing he waer hammer pressure. Be carefu ha he maximum working pressure is no exceee uring use. Concerning he aowabe pressure for each emperaure an maeria, see he echnica ocumens a he en of his caaog. PARTS IST MANUA FANGED a SPIGOT 3a PART NO. / NAME QTY MATERIA BODY 2 BA PART NO. / NAME QTY MATERIA 8 STOP RING (B) (2) 2 9 SEAT EPDM, FKM, ec. 3 END CONNECTOR 2 4 UNION NUT 2 5 STOP RING (A),,, 0 O-RING EPDM, FKM, ec. 4a RING () 2 SUS304 NOTES () Use for 5 o 25 mm for hreae ype. (2) Use for fange ype. 53

10 FANGED n~ h SPIGOT SPIGOT D 2 φd₁ ₃ φd₁ ₃ FANGED n~ h 2 2 PRODUCT MODE CODE IST MANUA ACTUATION V TYPE TC OPERATING SYSTEM BODY MATERIA ZZ SEA MATERIA CONNECTION STANDARD SIZE V MANUA VAVE TC TRUE UNION BA CHECK ZZ NONE U C P F E EPDM V FKM S N F FANGED P SPIGOT D DIN A ANSI 05 5mm mm MANUA TRUE UNION BA CHECK VAVE TYPE VTCZZ CONNECTION / FANGED,,, SPIGOT DIN D JIS(Uni: mm) mm FANGED JIS5K JIS0K D C n h D C n h /T ' / Rc / / Rc 4/ / Rc / Rc / / Rc DIN (Uni: mm) FANGED DIN PN0 mm DIN 8063 DIN 6962 D C n h mm 3 SPIGOT DIN 3442 DIN Rp / Rp 3/ Rp Rp / Rp ANSI (Uni: inch) inch mm FANGED ANSI Cass 50 ANSI/ASME B.20. D C n h ASTM SCH40 ' 2 / /2-4NPT / /4-4NPT /2NPT / /2- /2NPT /2NPT

11 CHECK VAVE / BA FOOT VAVE BA FOOT VAVE INTEGRA MODING WITH SCREEN INCREASES STRENGTH AT CONNECTION AREA. FOW PASSAGE STRUCTURE WITH OW FUID RESISTANCE SMA PARTS QUANTITY AND A SINGE CONNECTION REDUCE EXTERNA STRESS EFFECTS, AOWING HIGH FINISHING ACCURACY. IGHTWEIGHT AND SMA SIZE AOW INSTAATION IN NARROW SPACES AND FACIITATE DISASSEMBED CEANING. BASIC SPECIFICATIONS VAVE TYPE BA FOOT VAVE SIZE 5 mm-00 mm (/2 inch-4 inch) BODY MATERIA SEA MATERIA / SEAT EPDM FKM ec. CONNECTION / FANGED JIS5K, JIS0K, DIN, ANSI JIS, DIN, ANSI Rc, Rp, NPT FUID TEMPERATURE MAXIMUM WORKING PRESSURE (NORMA TEMPERATURE) MPa{kgf/cm 2 CONNECTION METHOD } 5 mm 50 mm 80mm 00mm FANGED 0 ~ 50.0{0.2} 0.7{7.} 0 ~ 90.0{0.2} 0.7{7.} - 20 ~ 80.0{0.2} 0.5{5.} ~ 00.0{0.2} 0.7{7.} - MANUA NOTES The maximum working pressure is he vaue incuing he waer hammer pressure. Be carefu ha he maximum working pressure is no exceee uring use. Concerning he aowabe pressure for each emperaure an maeria, see he echnica ocumens a he en of his caaog. PARTS IST MANUA FANGED a PART NO. / NAME QTY MATERIA BODY PART NO. / NAME QTY MATERIA 9 SEAT EPDM, FKM, ec. 2 BA 4 UNION NUT 5 STOP RING (A) 6 TS FANGE 7 PIPE 8 SCREEN FANGED,,,,,,, 4a RING () SUS304 NOTES () Use for 5 o 25 mm for boy maeria of an connecion of hreae ype. (2) Use for fange ype. (3) fange ype is no prouce. 55

12 PRODUCT MODE CODE IST MANUA ACTUATION V TYPE FT OPERATING SYSTEM BODY MATERIA ZZ SEA MATERIA CONNECTION STANDARD SIZE V MANUA VAVE FT BA FOOT ZZ NONE U C P F E EPDM V FKM S N F FANGED J JIS JIS0K 5 JIS5K D DIN A ANSI 05 5mm 00 00mm NOTES an socke ypes are we ype. sockes are of DIN ype ony. For 32 mm an 65 mm fange ypes, iniviua service may be avaiabe. Conac us for more eais. an fange ypes are no prouce. MANUA BA FOOT VAVE TYPE VFTZZ CONNECTION / FANGED, JIS, DIN, ANSI Rc, Rp, NPT FANGED n-φh φ φd Taper /T 2 JIS (Uni: mm) FANGED JIS5K JIS 0K mm 2 D C n h D C n h /T / Rc / / Rc / / Rc / Rc / / Rc / Rc / Rc DIN (Uni: mm) mm ' Rp / Rp 3/ Rp Rp / Rp Rp Rp ANSI (Uni: inch) FANGED inch mm D C n h ' 2 / /2-4NPT / /4-4NPT /2 NPT / /2- /2NPT /2 NPT NPT NPT

CHECK VALVE P.147 SWING CHECK VALVE P.149 WAFER CHECK VALVE P.151 BALL CHECK VALVE P.153 TRUE UNION BALL CHECK VALVE P.155 BALL FOOT VALVE

CHECK VALVE P.147 SWING CHECK VALVE P.149 WAFER CHECK VALVE P.151 BALL CHECK VALVE P.153 TRUE UNION BALL CHECK VALVE P.155 BALL FOOT VALVE CHECK VAVE P.147 P.149 P.151 P.153 P.155 SWING CHECK VAVE WAFER CHECK VAVE BA CHECK VAVE TRUE UNION BA CHECK VAVE BA FOOT VAVE 145 PERFORMANCE OF SWING CHECK VAVE, BA CHECK VAVE, AND BA FOOT VAVE Min.

More information

New Higher Pressure Rating

New Higher Pressure Rating New igher Pressure Raing Specificaions Sizes: " 8" Modes: anged (ANSI) Connecion Ony ever and Weigh Opion Bodies: I-PVC, and Seas: EPDM, KM, PTE Sea: EPDM, KM, PTE Sandard eaures (Sizes " 8") Minimum fow

More information

INSTALLATION AND MAINTENANCE MANUAL for ST400-C339 SOLENOID VALVE

INSTALLATION AND MAINTENANCE MANUAL for ST400-C339 SOLENOID VALVE 04666358 Edition 2 February, 1999 INSTALLATION AND MAINTENANCE MANUAL for ST400-C339 SOLENOID VALVE. IMPORTANT SAFETY INFORMATION ENCLOSED. READ THIS MANUAL BEFORE OPERATING VALVE. IT IS THE RESPONSIBILITY

More information

Item 501M. 3-Way Metal Seated Ball Valve. ASME 150/ 300 & 800 psi SIZE: 1/2"-2"

Item 501M. 3-Way Metal Seated Ball Valve. ASME 150/ 300 & 800 psi SIZE: 1/2-2 Item M 3-Way Metal Seated Ball Valve ASME / 300 & 800 psi : -" ZIPSON'S M type, 3-way metal seated ball valve is a totally unique valve design for critical working condition of high working temperature

More information

Prestolok. Spark resistant push-in fittings for fluids. Catalogue /UK

Prestolok. Spark resistant push-in fittings for fluids. Catalogue /UK Spark resistant push-in fittings for fuids Cataogue 352-/UK Cataogue 352-/UK Index Straight connectors Mae - BSPT Mae - Metric Mae - BSPT Mae - NPTF F23PB - p. C F2PB - p. C F3PB - p. C FPB - p. C Mae

More information

Clamping devices. CLAMPEX clamping elements offer new possibilities as a shaft-hub-connection:

Clamping devices. CLAMPEX clamping elements offer new possibilities as a shaft-hub-connection: Keyess camping devices Camping devices Genera description: CLAMPEX are keyess camping devices designed to transmit torque via friction on mating components. These designs produce high transmittabe torque

More information

BS 1452 Gr Gr. 420/ Gr. 420/ AB2 304 C C S S S S16. E mm

BS 1452 Gr Gr. 420/ Gr. 420/ AB2 304 C C S S S S16. E mm WAFER TYPE BUTTERFY VAVE SPECIFICATION FOR BS EN 1092-2 PN10 / PN16 FANGE MOUNTING FACE-TO-FACE DIMENSION TO ISO 5752 / BS 5155 / BS EN 593 EVER / WORM GEAR OPERATOR PRESSURE / TEMPERATURE RATINGS BFV-WB

More information

INSTRUMENTATION BALL VALVES VB3 Series

INSTRUMENTATION BALL VALVES VB3 Series INSTRUMENTATION BALL VALVES VB3 Series www.korokusa.com Kor-Lok USA eatures Directiona ande Pressure rating wit standard PTE seats 3000psig (206bar) ony for te vaves wit orifice 4.8 2500psig (172bar) for

More information

15 50mm mm TYPE TA TYPE AA TYPE VC TYPE T TYPE V

15 50mm mm TYPE TA TYPE AA TYPE VC TYPE T TYPE V B VVE INEUP PPICTION TYPE MTERI 21α 15 50mm FOR CEMICS FOR WTER 21 WTER B VVE 15 50mm 65 100mm 15 50mm 3 WY B 23 15 100mm 23 25 40mm B COCK 1/4 3/8inch COMPCT 13 80mm VIBE OPTIONS UTOMTIC Opions oher han

More information

True Union Ball Valve (BN) Product Category. Compact Ball. 2-pieces Compact Ball. Single Union Without Support. Ball Valve. True Union Without Support

True Union Ball Valve (BN) Product Category. Compact Ball. 2-pieces Compact Ball. Single Union Without Support. Ball Valve. True Union Without Support Sekisui Industrial Piping Co., Ltd. located in the Chungkang Export Processing Zone of Taichung City in Taiwan. From March of 2006, Sekisui Industrial Piping Co., Ltd. was established as a wholly-owned

More information

Quick Connect Couplings Series ES single shut-off - The ORIGINAL DN 7.2

Quick Connect Couplings Series ES single shut-off - The ORIGINAL DN 7.2 Quick Connect Coupings Series ES singe shut-off - The ORIGINAL Quick Connect Coupings of brass or brass MS 58 nicke-pate New hose barb for safe fit of hose an easy assemby Seeve esign protects the couping

More information

Electric Actuators. Series 94 Electric Actuators

Electric Actuators. Series 94 Electric Actuators SERIES 9 SERIES 9 Series 9 Eecric cuaors Sandard Feaures (Sizes /" 3") Brushess, capacior-run moors (C modes) Inegra herma overoad proecion wih auorese (C modes) Permaneny ubricaed gear rain Duy cyce 00%

More information

BALL VALVE. BALL VALVE TYPE 21, 21α WATER BALL VALVE 3 WAY BALL VALVE TYPE 23 3 WAY BALL VALVE TYPE 23 H LAB COCK COMPACT BALL VALVE TYPE 27 P.

BALL VALVE. BALL VALVE TYPE 21, 21α WATER BALL VALVE 3 WAY BALL VALVE TYPE 23 3 WAY BALL VALVE TYPE 23 H LAB COCK COMPACT BALL VALVE TYPE 27 P. B VVE P.043 P.053 P.057 P.063 P.065 P.067 B VVE TYPE 21, 21α WTER B VVE 3 WY B VVE TYPE 23 3 WY B VVE TYPE 23 B COCK COMPCT B VVE TYPE 27 041 B VVE INEUP PPICTION TYPE MTERI 21α 15 50mm FOR CEMICS FOR

More information

High Technology, High Quality!! Korea s best marine valve supplier

High Technology, High Quality!! Korea s best marine valve supplier High echnology, High Quality!! 303, River Park, 132 (Hwamyeng-dong) Haksa-Ro, Buk-Gu, Busan, Korea el : 82-51-342-1041(Ref.) Fax : 82-51-342-1042 E-mail : valve@najin.biz Site : www.najin.biz Korea s best

More information

INTEGRAL BONNET FORGED NEEDLE VALVES. VN5 Series.

INTEGRAL BONNET FORGED NEEDLE VALVES. VN5 Series. INTEGRA BONNET FORGED NEEDE VAVES VN5 Series www.uniok.com Vaves - VN5 Series Features ressure rating up to 5000psig (340bar) @38 C (00 F) Temperature rating from -53 C(-65 F) to 232 C (450 F) wit standard

More information

Floating Ball Valve - Design Features

Floating Ball Valve - Design Features 408 imbledon Rd. / Edmond, OK 73003 / Phone: 405-509-2665 / Fax: 866-239-1587 / www.mako-products.net Flanged Ball Valves Floating Ball Valve - Design Features Mounting and Stem Seal Design Actuator Mounting

More information

I N F L O W S Y S T E M S VALVULA DE RETENCIÓN

I N F L O W S Y S T E M S VALVULA DE RETENCIÓN PROUC TOS Y SOUCIONES EN REES E FUIOS PROUCTS AN SOUTIONS I N F O W S Y S T E M S VAVUA E RETENCIÓN CHECK VAVE Index 0 0 0 0 07 08 09 0 7 8 0 Features of ual Plate R wafer dual plate check valve R0 class

More information

(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST IRON INVERTED BUCKET STEAM TRAP

(ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST IRON INVERTED BUCKET STEAM TRAP (ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP ST-B1B2 ST-B3 ST-B4 (ST-B1 / ST-B2 / ST-B3 / ST-B4) CAST INVERTED BUCKET STEAM TRAP MATERIAL PARTS Cap and Body Valve Seat Valve Gasket Material

More information

Flat fan nozzles. Nozzle characteristics

Flat fan nozzles. Nozzle characteristics Fat fan nozzes Bet ceaning Coating Steam ceaning Degreasing High pressure ceaning Grave washing Cooing Surface treatment Phosphating Rain curtains Foam contro Foam spraying Lubrication Fiter ceaning ceaning

More information

Precision Ground Plates and Flat Bars. Lifting and Clamping Devices. Ground Precision Components. Elastomer-Bars, -Sheets, -Sections

Precision Ground Plates and Flat Bars. Lifting and Clamping Devices. Ground Precision Components. Elastomer-Bars, -Sheets, -Sections A B C D E F G H J K L Die Sets Precision Ground Pates and Fat Bars Lifting and Camping Devices Shanks, ifter studs, eyebots Camping caws, screws and bots Guide eements Ground Precision Components Springs

More information

BUTTERFLY VALVE VF-7 Series

BUTTERFLY VALVE VF-7 Series BUTTERFLY VALVE VF-7 Series CENTRIC, RUBBER SEATED LEVER GEAR PNEUMATIC - ELECTRIC OPERATED ALLOWABLE PRESSURE DN 40 300mm : 16 bar DN 350 1200mm : 10 bar INVESTMENT CASTING STAINLESS STEEL BODY 2 12 (50mm

More information

CHECK VALVES DUAL PLATE CHECK VALVES (DC SERIES) NOZZLE CHECK VALVES (NC SERIES)

CHECK VALVES DUAL PLATE CHECK VALVES (DC SERIES) NOZZLE CHECK VALVES (NC SERIES) CHECK VAVES DUA PATE CHECK VAVES (DC SERIES) NOZZE CHECK VAVES (NC SERIES) eading Korean valve manufacturer DUA PATE CHECK VAVE (DC SERIES) Range Size Fluid Application 1 1/2 (40A) ~ 84 (2100A) Water,

More information

Standard Quick-Disconnect Couplings Series ES one-way shut-off DN 7.2

Standard Quick-Disconnect Couplings Series ES one-way shut-off DN 7.2 Stanar Quick-Disconnect Coupings Series ES one-way shut-off Materias a PN 35 bar -20 C +100 C air a.o. 7,2 ISO 228/DIN 2999/DIN 13 1100 L/min yes 1-way Eur. Stanar wor-wie 10 Coupings with mae threa Threa

More information

Service Manual. Clamps for Bolt-on Arms and Turnafork

Service Manual. Clamps for Bolt-on Arms and Turnafork Service Manua Camps for Bot-on Arms and Turnafork Seria Numbers 634448 through 666419 Basic Camps Sideshifting Camps Revoving Camps Turnafork Mode C4T Manua Number 667447 cascade@ Cascade is a registered

More information

VDC Series High-Pressure Type Variable Volume Vane Pump

VDC Series High-Pressure Type Variable Volume Vane Pump V SRS PRSSUR TYP VARA VU VA PUP V Series igh-pressure Type Variabe Voume Vane Pump eatures q ighy efficient and stabe high-pressure operation nnovative pressure contro and pressure baance mechanisms combine

More information

Pigmented Polypropylene. Piping System

Pigmented Polypropylene. Piping System Pigmented Polypropylene Piping Sytem Photo courtey of Agape Water Solution Inc. 75 - Specification PP-Pure Pigmented Polypropylene (PP) High Purity Piping Sytem REV:HP0512PP Material: ASTM D4101 Group

More information

DK-Lok UHP Fittings. No.09-01(E) May 2017

DK-Lok UHP Fittings. No.09-01(E) May 2017 K-ok UP Fittings No.09-01() May 2017 ean UP Fitting ontents ean Wed Fittings Micro bow WM Micro ee WM Micro ross ee WMX Micro ribow WMB Micro af bow WM Micro Reducing bow WMR Micro Reducing ee WMR 05 05

More information

AIL CAST STEEL GATE, GLOBE & CHECK VALVES. ASME Class mm mm (2-48 ) API 600 API 603 AUDCO INDIA LIMITED ASME B16.

AIL CAST STEEL GATE, GLOBE & CHECK VALVES. ASME Class mm mm (2-48 ) API 600 API 603 AUDCO INDIA LIMITED ASME B16. AIL CAST STEEL GATE, GLOBE & CHECK VALVES ASME Cass 150-2500 50mm - 1200mm (2-48 ) API 600 API 603 ASME B16.34 AUDCO INDIA LIMITED Gate/Gobe/Check Introduction Vaves to API 600 The AIL Cast Stee Gate,

More information

BUTTERFLY VALVE WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) and 41001

BUTTERFLY VALVE WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) and 41001 Operation WAFER TYPE stainless steel 411 (41000) series PN40 For steam (fire safe versions) 41101 and 41001 C ont R o L Description Edition Wafer type butterfly valve 411 (410) series are used in industrial

More information

CATALOG 2017 SERIES 1

CATALOG 2017 SERIES 1 CTLOG 2017 SRIS 1 Passon Series 1 Passon Series 1 - The new range of innovative fittings create by Passon, market eaer in esign an manufacture of reiabe fittings for poyethyene pipe systems. Passon Series

More information

ABOVE GROUND TANKS 66 WATER DIVISION ROTOTEC

ABOVE GROUND TANKS 66 WATER DIVISION ROTOTEC OVE GROUND TNKS 66 WTER DIVISION ROTOTEC WTER DIVISION ROTOTEC 67 VERTICLE From 50 to 10000 itres Instaation Paced directy on a fat supporting surface vaiabe coours: standard on request Ø Cover Inet Outet

More information

Dimensions. Electrical connection

Dimensions. Electrical connection SU8-6/40a/0//6a Eecrica connecion Reease dae: 20-09-6 :4 Dae of issue: 20-0-20 8084_eng.xm 9 SENS H.Res Norm H.Spd Off.D T.Off On.D LO DO Mode Number SU8-6/40a/0//6a opic sensor wih fixed cabe BN +UB Feaures

More information

CATALOG 2016 SERIES 1

CATALOG 2016 SERIES 1 CTLOG 2016 SRIS 1 Passon Series 1 Passon Series 1 - The new range of innovative fittings create by Passon, market eaer in esign an manufacture of reiabe fittings for poyethyene pipe systems. Passon Series

More information

Modular valve block MVB 100/200

Modular valve block MVB 100/200 Modular valve block MVB 100/200 Nominal size DN 15 Nominal size 1/2 Nominal pressure PN 6 bar www.asv-stuebbe.com/produkte/armaturen Characteristics MVB 100 Ideal for realising dosing and distribution

More information

Our policy is one of continuous research and development. We therefore reserve the right

Our policy is one of continuous research and development. We therefore reserve the right Tubing & Hose Metric Nyon, Poyurethane, Poyester Reinforced PVC, Meta Braided Rubber, Copper, Doube Wa Brazed Stee Avaiabe in a variety of different types to suit a wide range of appications A tubing can

More information

KBF100. General Service Butterfly Valve KBF. Hot to Order System KOPECS CO.,LTD. EASBL TEL : FAX :

KBF100. General Service Butterfly Valve KBF. Hot to Order System KOPECS CO.,LTD. EASBL TEL : FAX : KBF100 General Service Butterfly Valve KOPECS Butterfly Valve Features KOPECS unique seat sealing esign offers frictional contact between valve disc and seat: ㆍ ㆍ Zero leakage,tight shut off ㆍ Lower torque

More information

GEAR MOTORS. Displacement from 2 to 15 ccm Pressure up to 280 bar Speed from 500 to 4000 RPM

GEAR MOTORS. Displacement from 2 to 15 ccm Pressure up to 280 bar Speed from 500 to 4000 RPM Dispacement from 2 to 15 ccm Pressure up to 280 bar Speed from 500 to 4000 PM GEA MOTOS JM Gear Motor Cataogue JM TABE OF CONTENTS DESCIPTION......................................................................................................................

More information

Angle Seat Globe Valve, Metal

Angle Seat Globe Valve, Metal Angle Seat Globe Valve, Metal Construction The GEMÜ manually operated 2/2-way angle seat globe valve has an ergonomically designed plastic handwheel. The valve spindle is sealed by a self-adjusting gland

More information

BUTTERFLY VALVES DOUBLE ECCENTRIC BUTTERFLY VALVES (HPB SERIES) TRIPLE OFFSET BUTTERFLY VALVES (TRB SERIES) SUNGWON AUTOMATION CO.,LTD.

BUTTERFLY VALVES DOUBLE ECCENTRIC BUTTERFLY VALVES (HPB SERIES) TRIPLE OFFSET BUTTERFLY VALVES (TRB SERIES) SUNGWON AUTOMATION CO.,LTD. BUTTERFY VAVES BUTTERFY VAVES DUBE ECCENTRIC BUTTERFY VAVES (HPB SERIES) TRIPE FFSET BUTTERFY VAVES (TRB SERIES) SUNGWN AUTMATIN C.,TD. DUBE ECCENTRIC BUTTERFY VAVE Range Application Size 2 (50A) ~ 80

More information

Components for. Overhead Cranes. Sta dard n. Engineered. Hoists. Endtrucks. Crane Kits. Engineered Material Handling

Components for. Overhead Cranes. Sta dard n. Engineered. Hoists. Endtrucks. Crane Kits. Engineered Material Handling Engineered Materia Handing Components for Overhead Cranes Sta dard n Hoists Engineered Hoists Endtrucks Crane Kits Troey drive consists of singe speed squirre-cage gear motors. Integra disc brakes are

More information

Innovation. Simplicity. is Simply Better. Rotary Lobe Pumps

Innovation. Simplicity. is Simply Better. Rotary Lobe Pumps Innovation Simpicity is Simpy Better Rotary Lobe Pumps So simpe, yet so diverse. Pease add. Six series with 19 sizes. AL-series PL-series CL-series FL-series EL-series XL-series A pump modes are manufactured

More information

PPN Piping System. Cost Effective Purity

PPN Piping System. Cost Effective Purity PPN Piping Sytem Cot Effective Purity 45 - Specification PolyPure Natural Polypropylene (PPn) High Purity Piping Sytem REV:HP0512PN Material: ASTM D4101 Group 2, Cla 1 natural polypropylene random copolymer

More information

Manifold Technology.

Manifold Technology. ----------------------------------------------------- 2017.2 Manifod Technoogy. made in Germany I Epkg. unitrything UNDER CONTROL. Manifod Technoogy - I BEULCO heating and cooing manifods made of high-quaity

More information

HDT1000 series ORIFLO METER. Multi-function Digital Flowmeter OUTLINE STANDARD SPECIFICATION FEATURES MAIN APPLICATIONS INDICATOR SPECIFICATION

HDT1000 series ORIFLO METER. Multi-function Digital Flowmeter OUTLINE STANDARD SPECIFICATION FEATURES MAIN APPLICATIONS INDICATOR SPECIFICATION ORIFO METER HDT series Multifunction Digital Flowmeter OUTINE HDT is a new series Oriflo meter combining orifice plate with multidigital indicator. HDT detects differential pressure exerted by flow velocity

More information

Displacement from 10 to 100 ccm Pressure up to 300 bar Speed from 300 to 3200 RPM GEAR PUMPS QHD1

Displacement from 10 to 100 ccm Pressure up to 300 bar Speed from 300 to 3200 RPM GEAR PUMPS QHD1 Dispacement from 10 to 100 ccm Pressure up to 300 bar Speed from 300 to 3200 PM GEA PUMPS QHD1 Gear Pump Cataogue QHD1 TABE OF CONTENTS DESCIPTION......................................................................................................................

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The GEMÜ pneumatically operated 2/2-way diaphragm valve has a low maintenance membrane actuator which can be controlled by inert gaseous media. Normally Closed, Normally

More information

Large chamber type level gauge. Model : L110, L210. Description. Model LEVEL GAUGE GLASS. Model - L110. Model - L220

Large chamber type level gauge. Model : L110, L210. Description. Model LEVEL GAUGE GLASS. Model - L110. Model - L220 Large chamber type level gauge Model : L110, L210 Description Model Model - L110 Chamber material - Carbon steel, stainless steel MAX. pressure - 14MPa Vessel connection - 25A, 40A, 50A Model - L220 Chamber

More information

Model TWS. Swirl Diffusers

Model TWS. Swirl Diffusers Mode TWS Swir Diffusers Mode TWS Advanced Air s new range of high performance TWS ceiing swir diffusers have been designed to deiver the high air change rates required to meet the demand of high oads.

More information

Unlined valves with flanged ends

Unlined valves with flanged ends Main Parts and Materials Unlined valves with flanged ends NO. PART MATERIA 1 2 DIAPHRAGM BODY WC_ Cast Iron EN-J1040 (GG25) WD_ RUBBER Ductile Iron EN-JS1030 (GGG40) Natural (D10) / EPDM (D20) / Butyl

More information

Praher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.

Praher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation. Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8-4 /16mm - 110mm Features Lockable Handle (Lock not supplied) True

More information

Praher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation.

Praher S4 Ball Valve. manual valves. Materials. Sizes. Pressure Rating. Features. Connections. Valve Dimensions. Actuation. Praher S4 Ball Valve Lockable Handle Tagging Point Valve Bracket Actuation Materials Body - PVDF Ball Seat - PTFE Seals - FPM Sizes 3/8" - 4"/16mm - 110mm Features Lockable Handle (Lock not supplied) True

More information

Section - L. Antipollution devices

Section - L. Antipollution devices Section - Antipollution devices ANTIPOUTION DEVICES EXAMPE OF APPICATION 2 3 3 2 4 1 1 Backflow preventer unit. 2 Backflow preventers with unregulated pressure zone. 3 Anti siphon devices. 4 Anti siphon

More information

S.B. 469 for information on GM applications). Both styles are shown in Figure 1. Figure 1

S.B. 469 for information on GM applications). Both styles are shown in Figure 1. Figure 1 NO: 4263132 SERVICE BULLETIN DATE: January X,1993 Supersedes: S.B. 426R dated 11/7/89 SUBJECT: ZERO-CLEARAN CE GOVERNOR WEIGHT RETAINER ASSEMBLIES In June 1988, Stanadyne introduced a zero-cearance Eastomer

More information

Propane Floor Burnisher Equipment Section II. Parts Manual (70076A) A.L. COOK TECHNOLOGY Burnishers Operator's Manual Page 9

Propane Floor Burnisher Equipment Section II. Parts Manual (70076A) A.L. COOK TECHNOLOGY Burnishers Operator's Manual Page 9 Propane Foor Burnisher Equipment Section II Parts Manua (00A) A.L. COOK TECHNOLOGY Burnishers Operator's Manua Page 9 ", " and " Frame Assemby /99 9B 9 0 9A 9C A B A B 0A 0B 0C 0 C Page 0 A.L. COOK TECHNOLOGY

More information

Flow Monitor FS10. Description FS10-.. Connection diagram FS10. Ordering information. Electrical connection. Flow rate ranges FS 10

Flow Monitor FS10. Description FS10-.. Connection diagram FS10. Ordering information. Electrical connection. Flow rate ranges FS 10 Flow Monior FS0 Descripion Compac single poin flow monior, MIN or MAX monioring opions, suiable for waer, oil, air or media wih similar hermal conduciviies. Wih screw-in or plug-in ype monioring head for

More information

LASER & LOW BODY Fan Coil Units

LASER & LOW BODY Fan Coil Units LASER & LOW BODY Fan Coi Units 2 & 4 pipe system A compete range from 0.6 kw up to 9.7 kw TUC03 Termina unit controer BacNET and N2 Metasys network compatibe CSL00 (Buit in) CSR00 (Wa mounted) Fan speed

More information

flowit by Fig. FTBGW-20 Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Material Specifications Dimensions (mm)

flowit by Fig. FTBGW-20 Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Material Specifications Dimensions (mm) flowit flowit by Bronze Gate Valve, Non-Rising Stem BS 5154 PN20 Fig. FTBGW-20 Designed to BS 5154 Pressure Rating: PN20 Threaded Bonnet End connection: BS21 Taper Threaded (ISO 7) / BS EN10226-2 Shell

More information

Model PHS (Female Threading Type)

Model PHS (Female Threading Type) Mode PHS (Femae Threading Type) φ φ Mode No. Length Outer dimensions Threaded Hoder Dimensions Diameter Width B 1 S 1 W D 1 D 2 B L D JIS Cass 2.1.2.1 PHS 5 35 16 8 M5.8 9 9 11 6 PHS 6 39 18 9 M6 1 11

More information

solenoid dosing pumps

solenoid dosing pumps teknaevo soenoid dosing pumps innovation > technoogy > future The evoution of soenoid dosing pumps Cever Just Modes, Just PVDF, A functions in one pump modes that cover 1 to 60 t/h with an output pressure

More information

ANTILOCK BRAKE SYSTEM

ANTILOCK BRAKE SYSTEM SECTION 4F ANTILOCK BRAKE SYSTEM Caution: Disconnect the negative battery cabe before removing or instaing any eectrica unit or when a too or equipment coud easiy come in contact with exposed eectrica

More information

Flow Monitor FS10. Description FS10-.. Connection diagram FS10. Ordering information. Electrical connection. Flow rate ranges

Flow Monitor FS10. Description FS10-.. Connection diagram FS10. Ordering information. Electrical connection. Flow rate ranges Flow Monior FS0 Descripion Compac single poin flow monior, MIN or MAX monioring opions, suiable for waer, oil, air or media wih similar hermal conduciviies. Wih screw-in or plug-in ype monioring head for

More information

Displacement from 9 to 31 ccm Pressure up to 280 bar Speed from 500 to 3000 RPM GEAR PUMPS T3S

Displacement from 9 to 31 ccm Pressure up to 280 bar Speed from 500 to 3000 RPM GEAR PUMPS T3S Dispacement from 9 to 31 ccm Pressure up to 280 bar Speed from 500 to 3000 PM GEA PUMPS T3S Gear Pump Cataogue T3S TABE OF CONTENTS DESCIPTION......................................................................................................................

More information

Aluminium Fixed Blade Return Grilles Series

Aluminium Fixed Blade Return Grilles Series Auminium Fixed Bade Return Gries 4900 Series Auminium Fixed Bade Return Gries Modes 5145H and 51FH Return Gries have fixed horizonta bades (parae to width/first specified dim.) spaced on 19mm centres with

More information

611, 671. Diaphragm Valve, Metal

611, 671. Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic bonnet and an integral optical position indicator as standard. Features

More information

RCM - Direct Reading Flowmeters

RCM - Direct Reading Flowmeters Compact Design Easy to Install Horizontal or Vertical Installation Flow Rates up to 3000 GPM (Liquid) or 20000 SCFM (Gas) Low Pressure Drop Optional Alarms and Output Signals Accuracy: ± 3% of full scale

More information

1

1 www.systems-sunight.com 1 2 www.systems-sunight.com SUNLIGHT s motive power (traction) batteries motivate your business, as they provide reiabe energy to your industria vehices every day. SUNLIGHT s speciaized

More information

VACUUM. Technology. Vacuum wands Accessories. l l

VACUUM. Technology. Vacuum wands Accessories. l l Technoogy VACUUM Vacuum wands Accessories Windrush Technoogy Ltd. Te: +44 1993 774499. Fax: +44 870 123 6263. Emai: enquiries@windrush.net 1 Vacuum wands Features The unique vave* ensures reiabe suction

More information

PNEUMATICALLY ACTUATED 2-WAY

PNEUMATICALLY ACTUATED 2-WAY 482 DN 25-65 The 482 diaphragm valve is particularly suitable for shutting off and regulating abrasive or dirty fluids. The new internal geometry of the body optimises fluid dynamic efficiency by increasing

More information

611, 671. Diaphragm Valve, Metal

611, 671. Diaphragm Valve, Metal Distributed by: Tel: 905.677.9000 Toll Free: 1.0.486.7863 www.tricanada.com Diaphragm Valve, Metal Construction The 611 and 671 manually operated 2/2-way metal diaphragm valves have a low maintenance plastic

More information

Shaft Locking Devices

Shaft Locking Devices abe of Contents JW Shaft ocking evices In his Section: Sef-Centering Series SS ow orque Series SS Meium orque Series SS High orque Series SS Heavy uty Series SS S www.ovejoy-inc.com 425 S-1 abe of Contents

More information

Displacement from 43 to 150 ccm Pressure up to 280 bar Speed from 250 to 3200 RPM GEAR PUMPS QHD2

Displacement from 43 to 150 ccm Pressure up to 280 bar Speed from 250 to 3200 RPM GEAR PUMPS QHD2 Dispacement from 43 to 150 ccm Pressure up to 280 bar Speed from 250 to 3200 PM GEA PUMPS QHD2 Gear Pump Cataogue QHD2 TABE OF CONTENTS BASIC DESCIPTION.............................................................................................................

More information

16 bar standard 25 bar - option Tightness class ISO 5208, EN Standard - RATE B, Option RATE A RATE A. 16 bar standard 25 bar - option

16 bar standard 25 bar - option Tightness class ISO 5208, EN Standard - RATE B, Option RATE A RATE A. 16 bar standard 25 bar - option Operation WAFER TYPE stainless steel C ont R o L Description Edition Wafer type butterfly valve is an on-off and control valve for demanding industrial pipelines. The valve is tight to both directions

More information

HANDBOOK PIPING ACCESSORIES. Ed PIPING ACCESSORIES AT-ED 01/ ENG 1

HANDBOOK PIPING ACCESSORIES. Ed PIPING ACCESSORIES AT-ED 01/ ENG 1 HANDBOOK Ed. 2017 AT-ED 01/2017 - ENG 1 CHAPTER 3 ACCESS FITTINGS AND VALVE CORES FOR REFRIGERATION PLANTS THAT USE HCFC, HFC, HC, HFO, OR R744 REFRIGERANTS APPLICATIONS The access fittings illustrated

More information

BALL valve FLOATING BALL VALVE

BALL valve FLOATING BALL VALVE BA valve FOATING BA VAVE BA VAVE APPICATION Because of their excellent operating characteristics, ball valves are used for the broadest spectrum of isolation applications and are available in a wide range

More information

Diaphragm valve MV 309

Diaphragm valve MV 309 Diaphragm valve MV 309 Nominal size DN 15 32 Nominal size 1/2 1 1/4 Pressure PN 6 bar Features pneumatic diaphragm valve DN 15 32 compact piston drive for medium pressure up to 6 bar (PTFE diaphragms)

More information

pvc-c manual valves inch sizes manual valves inch sizes Spears True Union 2000 Industrial Ball Valve

pvc-c manual valves inch sizes manual valves inch sizes Spears True Union 2000 Industrial Ball Valve pvc-c Spears True Union 2000 Industrial Ball Valve Description: In-line double union ball valve with lockable handle Maximum Fluid Pressure at 20 C: Sizes 1 /2 to 2-16 bar; sizes 2 1 /2 to 6-10 bar All

More information

Advanced PE Single Wall Piping System

Advanced PE Single Wall Piping System Advanced PE Single Wall Piping System 8 - Specification Black Polyethylene (Advanced PE) Piping System REV:IN0512PE Materials: Pipe Production: ASTM D3350 cell classification PE445584C. Resin shall comply

More information

A Product of Hard Work SELECTOR GRABS

A Product of Hard Work SELECTOR GRABS A Product of Hard Work SELECTOR GRABS ATTACHMENTS SELECTOR GRABS The perfect partner for your machine Simpe heavy duty design for maximum durabiity and reiabiity Buit in safety features to protect the

More information

2.2 T 212-A VÁLVULA BORBOLETA REVESTIDA DE PTFE MODELO T 212-A.

2.2 T 212-A VÁLVULA BORBOLETA REVESTIDA DE PTFE MODELO T 212-A. VÁVUA BORBOETA REVESTIDA DE MODEO T 212-A Double flanged -ined butterfly valve for shut-off and control services in the chemical Industry. TECHNICA DATA Nominal diameter: Face-to-face: EN 558 Series 20

More information

KBF200. High Performance Butterfly Valve. KBF200series Valve Sealing Principle KOPECS CO.,LTD. web :

KBF200. High Performance Butterfly Valve. KBF200series Valve Sealing Principle KOPECS CO.,LTD. web : KBF200 High Performance Butterfly Valve KBF200series Valve Sealing Principle 1 web : www.kopecs.com E-mail : kopecs@kopecs.com KOPECS CO.,LTD. TEL : +82-32-865-1711 FAX : +82-32-865-1718 KBF200 High Performance

More information

Industrial: Flare Fittings

Industrial: Flare Fittings Industria: Fare Fittings SAE 45 Fare Resists echanica Pu-out eets SAE Functiona Requirements Resists Vibration U isted Inverted Fare Stee ut option Economica U isted Access Vaves Finger Tight Quick Sea

More information

LASER & LOW BODY Fan Coil Units 2 & 4 pipe system A complete range from 0.7 kw up to 9.5 kw

LASER & LOW BODY Fan Coil Units 2 & 4 pipe system A complete range from 0.7 kw up to 9.5 kw york air-conditioning products LASER & LOW BODY Fan Coi Units 2 & 4 pipe system A compete range from 0.7 kw up to 9.5 kw CSL00 (Buit in) CSR00 (Wa mounted) Fan speed seector CML00 (Buit in) CMR00 (Wa mounted)

More information

WYECO. Y-Type Cylinder Actuated Valve. Model WY-C08YT-S

WYECO. Y-Type Cylinder Actuated Valve. Model WY-C08YT-S Y-Type Cylinder Actuated Valve Model WY-C08YT-S Model WY-C08YT-F Features Compact, Light weight, High quality High flow capacity Simple design, Easy to assembly Easy to install and maintain All stainless

More information

Constant Flow Valves. Specifications Sizes: PVC: 1/2", 3/4", 1", 2", 3", 4" CPVC: 1" and 2" Body: Bonnet: Models: Seals: Springs:

Constant Flow Valves. Specifications Sizes: PVC: 1/2, 3/4, 1, 2, 3, 4 CPVC: 1 and 2 Body: Bonnet: Models: Seals: Springs: Constant Flow Valves Standard Features (Sizes " 4") Body and bonnet are of solid PVC or CPVC All wetted parts are of thermoplastic and elastomeric materials for superior corrosion resistance A preset constant

More information

DOUBLE FLANGED BUTTERFLY VALVE F 012-K1

DOUBLE FLANGED BUTTERFLY VALVE F 012-K1 DOUBE FANGED BUTTERFY VAVE F 0-1 Double flanged butterfly valve with short construction length to be used in heavy duty applications. TECNICA DATA Nominal diameter: 0 bigger sizes upon request Face-to-face:

More information

Diaphragm Valve, Metal

Diaphragm Valve, Metal Diaphragm Valve, Metal Construction The 601, and manually operated diaphragm valves have a temperature resistant plastic handwheel, 602 has a stainless steel handwheel. Bonnet and internals are made all

More information

BUTTERFLY VALVE WAFER TYPE of carbon steel 311 ( ) series

BUTTERFLY VALVE WAFER TYPE of carbon steel 311 ( ) series Operation WAFER TYPE of carbon steel 311 (310-312) series C ont R o L Description Edition 23-07-2015 Wafer type butterfly valve 311 (310 312) series is used in industrial pipelines for demanding on-off

More information

Angle Seat Globe Valve, Metal

Angle Seat Globe Valve, Metal Angle Seat Globe Valve, Metal Construction The GEMÜ pneumatically operated /-way valve has a plastic pneumatic piston actuator. The valve spindle is sealed by a self-adjusting gland packing or a compact

More information

Thread Direction R = Right hand L = Left hand (Not Available for Micro Series) (Refer to leadscrew. Code. availability)

Thread Direction R = Right hand L = Left hand (Not Available for Micro Series) (Refer to leadscrew. Code. availability) Kerk onventiona s: FW Series Free Wheeing Kerk FW Series conventiona stye, without anti-backash function. The Kerk FW Series genera purpose free-wheeing nut is for appications not requiring anti-backash

More information

GEAR PUMPS. Displacement from 10 to 36 ccm Pressure up to 300 bar GHD0. Speed from 350 to 3400 RPM

GEAR PUMPS. Displacement from 10 to 36 ccm Pressure up to 300 bar GHD0. Speed from 350 to 3400 RPM GEA PUMPS Dispacement from 10 to 36 ccm Pressure up to 300 bar GHD0 Speed from 350 to 3400 PM Gear Pump Cataogue GHD0 TABE OF CONTENTS DESCIPTION......................................................................................................................

More information

DOUBLE FLANGED BUTTERFLY VALVE F 012-K1

DOUBLE FLANGED BUTTERFLY VALVE F 012-K1 DOUBE FANGED BUTTERFY VAVE F 0-1 Double flanged butterfly valve with short construction length to be used in heavy duty applications. TECNICA DATA Nominal diameter: 1 bigger sizes upon request Face-to-face:

More information

2 way ball valve M1 with pneumatic actuator

2 way ball valve M1 with pneumatic actuator Praher Plastics Austria GmbH DB/EN/DEEN/14/03/335 Subject to change without prior notice!! General: Valve body: Sealing material: Ball seating joint: Dimensions: PVC-U EPDM / FPM PTFE DN10 DN50 d16 d63

More information

manual valves inch sizes

manual valves inch sizes Spears True Union 2000 Industrial Vented Ball Valve Description: In-line double union ball valve Maximum Fluid Pressure at 20 C: All sizes 1 /2 to 2-16 bar; sizes 2 1 /2 to 4-10 bar; all sizes flanged

More information

ORIFLO CONTENTS COST EFECTIVE FLOW MEASUREMENT FOR LIQUIDS AND GASES INTEGRATED ORIFICE FLOWMETERS GENERAL FEATURES MAIN APPLICATIONS

ORIFLO CONTENTS COST EFECTIVE FLOW MEASUREMENT FOR LIQUIDS AND GASES INTEGRATED ORIFICE FLOWMETERS GENERAL FEATURES MAIN APPLICATIONS COST EFECTIVE FLOW MEASUREMENT FOR LIQUIDS AND GASES ORIFLO INTEGRATED ORIFICE FLOWMETERS GENERAL O series ORIFLO METER is a By-pass Orifice type flowmeter. Small sized variable flowmeter is installed

More information

PNEUMATIC ON OFF GLOBE VALVE

PNEUMATIC ON OFF GLOBE VALVE PNEUMATIC ON OFF GLOBE VALVE Model No. AGE0 SERIES s Bonnet -way globe valve, -way globe valve 1A(1/") ~ 00A(1") JIS 10K~K, ANSI 10#~900#, PN10~, etc. FF, RF, BW, SW Plain bonnet: -17 ~0 Extended bonnet:

More information

R677. Diaphragm Valve, Plastic

R677. Diaphragm Valve, Plastic Diaphragm Valve, Plastic Construction All medium wetted parts, the bonnet and handwheel of the GEMÜ 2/2-way diaphragm valve are made of plastic. The low maintenance plastic bonnet has an ergonomically

More information

Diaphragm Valve MV 310

Diaphragm Valve MV 310 ASV Stübbe GmbH & Co. KG Hollwieser Straße 5 D-32602 Vlotho Fon +49 (0) 57 33-7 99-0 Fax +49 (0) 57 33-7 99-2 00 www.asv-stuebbe.de contact@asv-stuebbe.de Application chemical plants water treatment Utilisation

More information

DOUBLE FLANGED BUTTERFLY VALVE F 012-K1

DOUBLE FLANGED BUTTERFLY VALVE F 012-K1 DOUBE FANGED BUTTERFY VAVE F 0-1 Double flanged butterfly valve with short construction length to be used in heavy duty applications. TECNICA DATA Nominal diameter: 1 bigger sizes upon request Face-to-face:

More information

TKD Series 3-Way Ball Valves Product Data Sheet

TKD Series 3-Way Ball Valves Product Data Sheet Product Data Sheet < SANDARDS > ASM D1784 ASM D2466 ASM D2467 ASM D2464 ASM F1498 introduction IPEX KD Series 3-Way Ball Valves can be used for flow diverting, mixing, or on/off isolation. hey will replace

More information

Pressure relief valve DHV 718

Pressure relief valve DHV 718 Pressure relief valve DHV 78 Benefits diaphragm controlled pressure relief valve with piston guidance simple design, reliable function particularly suitable for oscillating pumps constant, frictionless

More information