CODED SWITCHES SPACERS PART NO. PART NO. SCREWS FOR FIELD ASSEMBLY OF THUMBWHEEL SWITCHES (2 screws needed per assembly nuts)
|
|
|
- Kristian Oswin Thompson
- 5 years ago
- Views:
Transcription
1 3P SERIES,.100 THK. (Makes section pitch.400 ) SERIES FRONT MOUNT, FITS TYPE 0 & 3,.078 THK. (Makes section pitch 10mm) SERIES REAR MOUNT, FITS TYPE 2,.150 THK. (Makes section pitch.500 ) HARDWARE FOR FIED ASSEMBY-3 SERIES ONY. CODED SWITCHES SPACERS 3 SERIES FRONT MOUNT-FITS TYPE 0 & 3,.185 THK. (Makes section pitch.500 ) SERIES REAR MOUNT, FITS TYPE 1,.150 THK. (Makes section pitch.500 ) SCREWS FOR FIED ASSEMBY OF THUMBWHEE SWITCHES (2 screws needed per assembly nuts) NUMBER OF SECTIONS IN ASSEMBY FRONT MOUNTING REAR MOUNTING SCREW PART NUMBER (0 80 UNF THD. SIZE) MTG. STYE 00, 30 MTG. STYE 03, 33 MTG. STYE 04, 34 MTG. STYE 10, 20 MTG. STYE 14, See 3 series mounting styles, pages J-11 thru J-14. NUT NUT DRIVER (For nut) Two nuts required per assembly and screws Not required for assembly. Not supplied with sample pieces
2 Tool used to secure switch to panel. Tightens threaded fixing ring. FIXING SPANNERS RAFI 15.2mm, umotast 75 & 8.1mm RAFIX & E SERIES J11, J21 ACTUATORS BRIGHT CHROME ENAME ENAME RETAINING SPRING J19 ACTUATOR Material: Spring Steel. Tool used to secure switch to panel. Tightens threaded fixing ring & E SERIES J16, J26 ACTUATORS FRAMES Finish: Matte & 9000 SERIES J37, J47, J57 ACTUATORS Tool used to secure switch to panel. Tightens hexagon nut. 7000, 8020, 8060 & 8500 SERIES J51, J61, J81, J83, J85, J86, J91 ACTUATORS Finish: Matte. 7000, 8020, 8060 & 8500 SERIES J52, J62, J82, J84, J92 ACTUATORS Material: Spring Steel. BRIGHT CHROME ENAME ENAME Material: Spring Steel. BRIGHT CHROME ENAME ENAME Finish: Matte. J50, J60, J80, J83, J90 ACTUATORS 7000 SERIES J76 ACTUATORS MATTE Finish: Matte or Gloss. GOSS A A A03000 Finish: Matte. Special colors, custom markings available, consult Customer Service Center
3 FRAMES SEPARATE SNAP-IN Frames snap into panel opening and are independent from switch mounting. Accurate positioning of the PC mounted switch relative to the panel opening is necessary to provide proper clearance between actuator and frame. Available in two basic styles and four panel thicknesses in. Finish: Matte & E SERIES J1, J2 ACTUATORS 7000, 8020, 8060, 8500, E, E010, E020 & TP SERIES J50, J60, J80, J90 ACTUATORS.047 (1,19) PANE THK..062 (1,57) PANE THK..090 (2,29) PANE THK..125 (3,18) PANE THK (1,19) PANE THK..062 (1,57) PANE THK..090 (2,29) PANE THK..125 (3,18) PANE THK PANE MOUNTING , 4527, 4528, , , 4328 TYPICA APPICATION.005 R. MAX. (0,13) TYP (12,57 12,83).005 R. (0,13) MAX. TYP (12,57 12,83).005 R. (0,13) MAX. TYP (12,57 12,83) (20,24 20,40) (15,11 15,37) (15,75 15,88) PANE INSERTS (WI FIT SEPARATE SNAP-IN FRAMES FOR J50, J60, J90 ACTUATORS). Above frames (part nos. 432XXXXXX) are also available with insert which accepts ED for indicator light assembly. Order insert separately from frame. Blank insert panel (without hole for ED) also available. ED not included, see page -17 for ED information and recommendations. PANE INSERT WITH HOE FOR ED BANK PANE INSERT WITHOUT HOE FOR ED Special colors, custom markings available, consult Customer Service Center
4 INSERT D SERIES (ONE KEY) MATERIA Brass; Finish: Nickel plate A, H, P, W, Y, Y Key Code: A126 MATERIA Zinc nylon 6/6 Finish: Matte 4 TUMBER 5 TUMBER (ONE KEY) MATERIA Brass; Finish: Nickel plate A, BY, GY, H, Y, Y Key Code: D001 (ONE KEY) KEYS 4 TUMBER 5 TUMBER BEIGE MATERIA Brass; Finish: Nickel plate; 6/6 Nylon insert molded head A, H, P, W, Y, Y Key Code: A126 (ONE KEY) BEIGE MATERIA Brass; Finish: Nickel plate; 6/6 Nylon insert molded head A, BY, GY, H, Y, Y Key Code: D001 A, H, W, Y & Y SERIES KEY CODE: AAAA (ONE KEY) MATERIA Zinc alloy; Finish: Chrome plate PF, P & PM SERIES KEY CODE: 041 YF & YM SERIES KEY CODE: 0029 BY, GY SERIES KEY CODE: 3434 (ONE KEY) BEIGE MATERIA Brass; Finish: Nickel plate; 6/6 Nylon insert molded head (ONE KEY) MATERIA Brass; Finish: Nickel plate (ONE KEY) 11630CKBYST MATERIA Zinc alloy; Finish: Chrome plate A, BY, H, P, W, Y & Y SERIES Key Code: A126 RAFI UMOTAST 75 RAFIX 16 (ONE KEY) BEIGE MATERIA Brass; Finish: Nickel plate; 6/6 Nylon insert molded head (ONE KEY) (ONE KEY)
5 RAFI 8.1 mm Illuminated Pushbutton Tool used to remove lamps or EDs from switches. MP SERIES 02, R2 & S2 CAP STYES YEOW GREEN AMP EXTRACTORS RAFI umotast 75 Tool used to remove lamps or EDs from switches. EDS & FIAMENT AMPS MP SERIES 01, A1, A2 & S1 CAP STYES YEOW GREEN ED PART NUMBER COOR BASE VOTAGE U B CURRENT I F FORWARD RAFIX 16 Tool used to remove lamps or EDs from switches. AMP EXTRACTOR PART NUMBER Chip ED Red Green Yellow Bi-pin T1 DC* 10 ma 8.1mm Illuminated Pushbutton Chip ED Red Green Yellow T4.5 DC* 10 ma umotast chip ED Red Green Yellow W 2x4.6 d % AC/DC max. 12 ma RAFIX *Must install a suitable external series resistor. FIAMENT AMP PART NUMBER BASE RATED VOTAGE RATED CURRENT (A or ma) RATED POWER (W) AVERAGE OPERATING IFE (Hrs.) AMP EXTRACTOR PART NUMBER Miniature Telephone Filament amp T V 12 V 24 V 0.05 A 0.04 A 0.02 A ,000 10,000 8,000 umotast Filament amp W 2x4.6 d 6 V 12 V 24 V 60 V 0.20 A 0.08 A 0.04 A 0.02 A ,000 15,000 7,000 3,300 RAFIX Indicator amp T1 Bi-pin 6 V 12/14 V 24/28 V 0.05 A 0.03 A A ,000 20,000 5, mm Illum. Pushbuttons
6 FITS BUSHING.435 DIA. (11,05Ø) NICKE PATED WITH FAT FITS BUSHING NICKE PATED WITH KEYWAY 7000, 8500 & 9000 SERIES FITS 15/32 BUSHING.468 DIA. (11,89).718 DIA. (18,24Ø).040 (1,02).090 (2,29) OCKING RINGS 7000, 8020, 8060, 8500, 9000, M,.435 DIA. (11,05Ø) NICKE PATED WITH KEYWAY WITH KEYWAY 7000, 8020, 8060, 8500, 9000, M,.343 DIA. (8,71Ø) NICKE PATED WITH KEYWAY WITH KEYWAY 7000, 8020, 8060, 8500, 9000, M,.468 DIA. (11,89Ø).082 (2,08) NICKE PATED WITH KEYWAY WITH KEYWAY NICKE PATED WITH FAT WITH FAT 7000, 8020 & 8060 SERIES FITS M6P2 METRIC BUSHING 7000, 8020, 8060, 8500, 9000, M,.472 DIA. (11,99Ø).034 (0,86).343 DIA. (8,71Ø).082 (2,08) NICKE PATED WITH KEYWAY WITH KEYWAY NICKE PATED WITH FAT WITH FAT MATERIA Brass, nickel plated standard. Other finishes available, consult Customer Service Center
7 OCKWASHERS FITS BUSHING NICKE PATED A SERIES FITS 3/8 DIA. THREAD NICKE PATED.310 (7,87).402 (10,21).018 THK. (0,46).018 THK. (0,46) FITS 15/32 BUSHING MATERIA Steel; Finish: Zinc plate NICKE PATED A, BY, GY, H, W, Y & Y SERIES FITS 3/4 DIA. BUSHING NICKE PATED.593 (15,06).021 THK. (0,53) MATERIA Steel; Finish: Zinc plate MATERIA Steel, nickel plated standard. Other finishes available, consult Customer Service Center. MOUNTING CIP A, BY, GY, H, P, W, Y & Y SERIES (25,65).615 (15,62).100 (2,54) (29,21) MATERIA Steel; Finish: Nickel or bright zinc plate.030 (0,76).250 (6,36) -19
8 NUTS (DRESS) Y, H & A SERIES NICKE PATE POISHED NICKE PATE GOSS PATE 8020, 8060, E010 & TP SERIES NICKE PATED (7,11).215 DIA. (5,46) UNS.040 (1,02) NICKE PATED 7000, 8020, 8060, 8500, 9000, E, E010, (8,94) BIND THD..118 (3,00) NICKE PATED 7000, 8020, 8060, 8500, 9000, E, E010, T, TP.312 DIA. (7,92Ø).070 (1,78).372 DIA. (9,45Ø) 8020, 8060, 8500 & TP SERIES NICKE PATED 7000, 8020, 8060, 8500, 9000, E, E010, (11,18).090 (2,29) NICKE PATED 7000, 8020, 8060, 8500, 9000, E, E010, T, TP.460 DIA. (11,68Ø) 7000, 8020, 8060, 8500, 9000, E, E010, 8500 SERIES 7000 SERIES, T2P ACTUATOR.352 (8,94).372 DIA. (9,45Ø).630 DIA. (16,00Ø).322 DIA. (8,18Ø) 15/32-32 NS BIND THD..556 (14,12).030 (0,76).118 (3,00).170 (4,32) NICKE PATED NICKE PATED NICKE PATED MATERIA Brass, nickel plated standard. Other finishes available, consult Customer Service center
9 NUTS (DRESS) 7000, 8500 & 9000 SERIES NICKE PATED.750 (19,05).770 DIA. (19,56Ø) 15/32-32 NS.120 (3,05) MATERIA 7000, 8020 & 8060 SERIES NICKE PATED Brass, nickel plated standard. Other finishes available, consult Customer Service center. NUTS (KNU) 7000, 8020, 8060, 8500, 9000, 7000, 8020, 8060, 8500, 9000, E, E010, NICKE PATED Controlled Knurl 7000, 8020, 8060, 8500, 9000, FITS GUMITE #12 SOCKET & WRENCH DIA. (7,92ø).080 (2,03).362 DIA. (9,19Ø) NICKE PATED 7000, 8500 & 9000 SERIES.300 DIA. (7,62Ø).100 (2,54).638 DIA. (16,21Ø) 15/32-32 NS BIND THD. Controlled Knurl NICKE PATED.062 (1,57) NICKE PATED.174 (4,42) 7000, 8020 & 8060 SERIES (7,9Ø) M6P.75 THD. Controlled Knurl (2,0) NICKE PATED MATERIA Brass, nickel plated standard. Other finishes available, consult Customer Service center
H Series 4 & 6 Tumbler Power Switchlocks
4 & 6 Tumbler Power s Features/Benefits Positive detent Multi-pole and multi-position Snap-together assembly Power switching Typical Applications Machine controls Elevators Models Available Specifications
BY Series 4 Tumbler Value Added Security Switchlocks
4 Tumbler Value Added Security s Features/Benefits Anti-static switch Removable lock core atch pawl option Snap-together assembly Typical Applications Computers Point-of-sale terminals Postal equipment
7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
onlinecomponents.com
eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available Typical Applications
C&K 7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical Applications Telecommunications
8500 Series Subminiature Pushbutton Switches
Subminiature Switches Features/Benefits Pre-travel or over-travel models available Ratings up to 3 AMPS Reliable contact design RoHS compliant Typical Applications Detection Telecommunications and networking
CIT SWITCHTM ANT SPECIFICATIONS
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
ANT. Materials. Features. Miniature Toggle
Specificationscations RoHS Compliant ANT Electrical Ratings Electrical Life Contact Resistance 5A @ 0VAC, 8VDC A @ 50VAC See Contact Options 50,000 cycles typical
.410 (10.41) 1/4-40 UNS-2A Ø.115 (Ø 2.92) .410 (10.41) Ø.115 (Ø 2.92) Ø.115 (Ø 2.92)
Series A: Miniature Switches Series A Miniature Switches FEATURES Save Space and Weight,, PDT, and DPT Circuitry Choice of Actuators, Bushings and Terminations UL Recognized Models In inches (and millimeters)
.570 (14.48).415 (10.54) Ø.115 (Ø 2.92) .410 (10.41) Ø.115 (Ø 2.92) Ø.115 (Ø 2.92)
Series A: Miniature Toggle Switches SERIES A Miniature Toggle Switches FEATURES Save Space and Weight,, PDT, and DPT Circuitry Choice of Actuators, Bushings and Terminations UL Recognized Toggle Switches
SERIES 34A Miniature Toggle Switches
DIP Switches Toggle Switches Series A: Miniature Toggle Switches SERIES A Miniature Toggle Switches FEATURES Save Space and Weight,, PDT, and DPT Circuitry Choice of Actuators, Bushings and Terminations
SPECIFICATIONS: MATERIALS: If your preferred product configuration is not shown, please contact our sales representative for custom design.
SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 50,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. initial @2-4VDC 00mA for both silver
Indicator Lights (Neon, LED and Filament Lamp)
Indicator ights (Neon, ED and Filament amp) Colours and voltages: Neon Red, Amber, Green, Clear 100/130V (marked 110V), 200/250V (marked 230V) ED Red, Yellow, Green /2.2V Resistors for other voltages available
C&K 8060 Series Alternate Action and Momentary Pushbutton Switches
lternate ction and Momentary Switches Specifications CONTCT RTING: Q contact material: 6 MPS @ 120 V C or 28 V DC; 3 MPS @ 250 V C. See page -53 for additional ratings. ELECTRICL LIFE: 50,000 make-and-break
General Specifications
General Specifications Electrical Capacity (Resistive oad) Power evel (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C ogic evel (gold): 0.4VA maximum @ 28V AC/C maximum (Applicable Range 0.1mA ~ 0.1A
Toggles Product Selection Guide
s Product Selection Guide s Series 7000 Military E ET T GT 9000 Switch Type Miniature Miniature Miniature Subminiature Subminiature Ultraminiature Power Poles/Throws,, 3PDT, 4PDT,,,, 3PDT SPST,, SPST,,
E Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available
Distinctive Characteristics
Distinctive Characteristics Various cap styles and colors to meet differing application needs. Bright, full face illumination to distinctively indicate status. Rear panel threaded mounting or snap-in mounter
8060 Series Alternate Action and Momentary Pushbutton Switches
Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available Typical pplications Instrumentation Computers
C&K E Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical Applications Telecommunications
8060 Series Alternate Action and Momentary Pushbutton Switches
lternate ction and Momentary Switches Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available
C&K 7000 Series Miniature Toggle Switches
Miniature Switches Models vailable Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical
C&K 8020 Series Snap-acting Momentary Pushbutton Switches
Snap-acting Momentary Switches Models Available Features/enefits Positive tactile feel Multi-positions available Wide variety of termination options Typical Applications Instrumentation Computer peripherals
7000 Series Miniature Rocker & Lever Handle Switches
Miniature & Lever Handle Switches Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant
E Series Sealed Miniature Rocker and Lever Handle Switches
Sealed Miniature and Lever Handle Switches Features/Benefits Sealed against solder and cleaning process contaminants ESD Resistance all actuator options, case & bushing UL 94V-0 RoHS compliant Typical
T Series Subminiature Toggle Switches
eatures/benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation
8020 Series Snap-acting Momentary Pushbutton Switches
Snap-acting Momentary Switches Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS compliant
C&K 7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical Applications Telecommunications Instrumentation
7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant Typical Applications Telecommunications
LUMOTAST 25 selector switch 1-28 LUMOTAST 25 selector switch, Click quick-assembly feature 1-29 LUMOTAST 25 selector switch, ring nut fixing 1-29
General data TAST pushbutton range Illuminable pushbuttons and signal lamps. Please order lamps/leds separately. Mounting hole diameter: 6.2 mm 42 V/00 ma max. Water-jet proof IP65 Low profile Lamp socket
8500 Series Subminiature Pushbutton Switches
8500 Series Features/Benefits Pre-travel or over-travel models available Ratings up to 3 MPS Reliable contact design RoHS compliant Typical pplications Detection Telecommunications and networking equipment
ELECTRICAL SPECIFICATIONS
Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for
C&K 8020 Series Snap-acting Momentary Pushbutton Switches
Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS complient models available Typical pplications
Product Range. Rocker & Paddle Switches. Rocker & Paddle Switches. Rocker & Paddle Switches
Product Range for Panel Mounting: F, TRD and Gemini Series for PCB Mounting: Gemini Series Main features: Sealed or unsealed versions Various switch functions Gold or silver contacts LED illumination available
Series 300. Miniature Rocker & Paddle Switches
Series 00 SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 0,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. inital @ -VDC. 00mA for both
7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoS compliant Typical Applications Telecommunications
7000 Series Miniature Toggle Switches
Models vailable Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical pplications Telecommunications
C&K E Series Sealed Miniature Toggle Switches
Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available Typical Applications Telecommunications
RTBH Series 1-2 Pole Coded Rotary Switches
RTBH Series 1-2 Pole Coded Switches Features/Benefits Totally sealed Detent angles, 15, 22.5, 30 and 36 Multi pole Coding functions Robust construction RoHS Compliant Typical Applications Telecommunications
Momentary or alternate action pushbutton switches. UL approved 3A 250VAC, 6A 125VAC. Availability : consult factory for details of approved models.
Distinctive features and specifications Bushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 4A 30VDC - gold
Snap Action Miniature Pushbutton Switches
Snap Action Miniature Switches SERIES 38C Miniature Switches FEATURES and Circuitry Choice of Bushings, and Terminations Caps and Frames Available UL Recoginized DIMENSIONS IN INCHES (AND MILLIMETERS)
9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview
A 9000 SERIES Overview 9 SERIES Number of poles 3 Single pole Electrical functions 2 Normally closed (NC) 3 Normally open (NO) Terminals, case and bushing Case height 8 (.314) 2 Straight terminals - threaded
IL series Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary
Distinctive features and specifications Momentary pushbuttons for thick panels Illuminated or non-illuminated Tactile feedback Flat round actuator for optional marking Sealed to IP67 ENVIRONMENTAL SPECIFICATIONS
18000 series Snap-action momentary pushbutton switches
Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for
C&K ET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space Typical Applications Telecommunications Instrumentation
1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
SERIES 100 SWITCHES TOGGLE SWITCHES - MINIATURE. Phone: Fax: SPECIFICATIONS MATERIALS
TACT SERIES 100 - MINIATURE SPECIFICATIONS Contact Rating: Life Expectancy: Contact Resistance: Insulation Resistance: Dielectric Strength: See contact material options 40,000 make-and-break cycles at
SPDT DPDT 3PDT 4PDT SWITCHES TACT POS 1 POS 2 POS 3. Model No.
SCHEMATIC 3 2 1 Model No. SP-1 ON NONE ON SP-2 ON NONE (ON) SP-3 ON OFF ON SP-4 (ON) OFF (ON) SP-5 ON OFF (ON) Term. Comm. 2-3 OPEN 2-1 ( ) = Momentary 6 5 4 3 2 1 Model No. DP-1 ON NONE ON DP-2 ON NONE
Distinctive Characteristics
Distinctive Characteristics Full face or spot illumination with incandescent lamps or multi-element LEDs, with or without resistors. Choice of super bright LEDs in white, green, and blue as well as bright
Distinctive Characteristics
Distinctive Characteristics Full face or spot illumination with incandescent lamps or multi-element LEDs, with or without resistors. Short Body Pushbuttons Series YB Choice of super bright LEDs in white,
Studded Power Feed Thru Terminal Blocks
ST722 Series The Studded Power Feed Thru were designed for applications where power feed thru is necessary using standard double hole lugs with.625 spacing. These terminal blocks are available in three
C&K T Series Subminiature Toggle Switches
Features/Benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation
Two case lengths. Three electrical functions. Sealing options. Model X1146 with Ø 16 (.630) bushing ELECTRICAL SPECIFICATIONS.
Distinctive features and specifications Two case lengths Three electrical functions Sealing options Model X1146 with Ø 16 (.630) bushing Max. current/voltage rating with resistive load : - silver contact
C&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
Momentary pushbutton switches - round plunger
1200 series Momentary pushbutton switches - round plunger Distinctive features and specifications Butt action contacts, double break NF (EN 61058-1), UL and CSA approved ELECTRICAL SPECIFICATIONS Max.
T80-T Miniature Toggle Switches Compliant
T80-T Miniature Toggle Switches Compliant TCT DIP PUSH BUTT SLIDE SPECIFICTIS CTCT RTING: @ VC or 8 VDC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full load CTCT RESISTNCE: 0 m max. initial
General Specifications
General Specifications Electrical Capacity (Resistive oad) Power evel (silver): A @ 25/250V AC or A @ 30V C ogic evel (gold): 0.VA maximum @ 28V AC/C maximum (Applicable Range 0.mA ~ 0.A @ 20mV ~ 28V)
Series AV. Pushbutton Switches NUT O-RING HOW TO ORDER
Pushbutton Switches SPECIFICATIS: BUSHING: 22mm. CTACT RATING: 2A @ 48VDC or 125VAC. ELECTRICAL LIFE: 10,000cycles at full load. CTACT RESISTANCE: 10m-ohms max. initial @2-4VDC. INSULATI RESISTANCE: 1,000M-ohms
AV series Anti-vandal and security pushbutton switches
Anti-vandal and security pushbutton switches Distinctive features Attractive, robust and durable Irremovable Anti-jamming construction : reduced travel to prevent insertion of foreign parts and mechanism
AV SERIES PUSHBUTTON SWITCHES Distinctive features
PUSHBUTTON SWITCHES Distinctive features Attractive, robust and durable Irremovable Anti-jamming construction : reduced travel to prevent insertion of foreign parts and mechanism protected against crushing
ET Series Sealed Subminiature Toggle Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact size and small footprint save PCB
We Make It Easy! 3. All of our switches are shipped complete, just as ordered. No incomplete or partial deliveries of subcomponents and accessories
We Make It Easy! 1. We assemble the parts for you saves you time and money. Includes LEDs and accessories 2. Easy to order all options and accessories displayed in easy-to-follow ordering table. No complicated
General Specifications
General Specifications Electrical Capacity (Resistive oad) Power evel (silver): A @ 25/250V AC or A @ 30V C ogic evel (gold): 0.VA maximum @ 28V AC/C maximum (Applicable Range 0.mA ~ 0.A @ 20mV ~ 28V)
13000 series Professional quick-break momentary pushbutton switches
Distinctive features and specifications PC and panel mount models ushing Ø 6,35 (1/4) and 11,9 (15/32) UL and CECC approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : -
TP Series Tiny Pushbutton Switches
Tiny Switches Features/Benefits Subminiature size capable of switching 1 MP Vertical & right angle terminations PC & panel mount models Snap-in front panel mounting available Epoxy terminal seal-compatible
A Series 1-4 Pole Rotary Switches
1-4 Pole Switches Features/Benefits Multi-pole and multi-position Positive detent Shorting & non-shorting contacts Panel and PCB mounting RoHS Compliant Typical Applications Automotive Major and small
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Features/Benefits Multi-pole and multi-position Positive detent Shorting
Rockers Product Selection Guide
s Product Selection Guide Series 7000 E ET T 9000 DA D Switch Type Subminiature Subminiature & Lever andle Poles/Throws,, 3PDT, 4PDT,, 3PDT,, DPST, Max. Current 5 Amps 7.5 Amps 3 Amps 3 Amps 4 Amps Washable
ANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
LUMOTAST FK. General data. Content
General data TAST illuminated pushbutton range Illuminable pushbuttons and signal lamps with lamp socket T /T / 4. Please order lamps / LEDs separately. Mounting hole diameter 6.2 mm 42 V/00 ma max. Water-jet
Pushbutton switches & indicators. Panel Sealed to IP65. Push on tab terminals 6A 250VAC AGENCY APPROVALS
Distinctive features and specifications A01_AX1607US Panel Sealed to IP65 Single pole to four pole changeover Custom engraving or film legends options Push on tab terminals 6A 250VAC PANEL CUT OUT ELECTRICAL
IHS series Hall effect pushbutton switches - bushing Ø 12 mm - momentary Overview IHS SERIES Actuator shapes Electrical function Operating force Termi
IHS series Hall effect pushbutton switches - bushing Ø 12 mm - momentary Distinctive features and specifications Momentary pushbutton (NO) 5 million cycles Low behind-panel depth Standard and high actuator
Series OCQ Pneumatic Compact Cylinders
The Price Alternative Series OCQ Pneumatic Compact Cylinders Ten bore sizes available in incremental stroke lengths Standard shock pads reduce end of travel impact Standard magnets for switch sensing capability
Miniature Toggle Switches
T80-T Miniature Toggle Switches Compliant D E L F R E E TCT DIP PUSH BUTT SLIDE ROCKER TOGGLE INDEX SPECIFICTIS CTCT RTING: @ VC or 8 VDC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full
istributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. BP Series Pushbutton Switches, Splashproof Boot Seals A wide selection of
IQ series Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting
Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting Distinctive features Like the IR series, the IQ series is a range of sealed pushbutton switches with dia. 16 mm bushing. But IQ pushbuttons
Pushbutton switches & indicators. Panel Sealed to IP65. Push on tab terminals 6A 250VAC AGENCY APPROVALS
Distinctive features and specifications Panel Sealed to IP65 Single pole to four pole changeover Custom engraving or film legends options Push on tab terminals 6A 250VAC A01_AX1607USR1 ELECTRICAL SPECIFICATIONS
SPECIFICATIONS MATERIALS. NONE = Black WHT= White RED = Red M1 M3 M5. YEL = Yellow. GRY = Gray PUR = Purple. **Contact E-Switch for additional colors
SERIES 300 AND PADDLE - MINIATURE FEATURES & BENEFITS Multiple rocker & paddle options Up to 4 poles Multiple termination options Snap-in panel mount option available HOW TO ORDER APPLICATIONS/MARKETS
Selection guide - Section B1 «I» range
Selection guide - Section «I» range New! New! New! New! New! New! Series IC IL IM IP IB-IS IHS IHL IQ mom. & latching hall effect hall effect momentary Page -2-6 -11-15 -25-29 -32-35 Poles 1 1 1 1 1 1
8000 series Momentary or alternate action pushbutton switches
Distinctive features and specifications ushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 3A 250VAC - 6A
Sealed pushbutton switches - bushing Ø 16 mm - momentary
Sealed pushbutton switches - bushing Ø 16 mm - momentary Distinctive features The IR series is a range of sealed momentary pushbutton switches with dia. 16 mm bushing. This series is divided into 2 families
Switches. SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY 115VAC, 28VDC)
SWITCH SELECTION GUIDE Toggle Switches SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive @ 115VAC, 28VDC) T1 2 or 3 Position, Momentary, 8A MIL-PRF-83731 15/32" or 1/4" dia.
C&K E Series Sealed Miniature Toggle Switches
Models vailable Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical pplications Telecommunications
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. C&K ET Series Sealed Subminiature Switches Features/Benefits Sealed against
Distinctive Characteristics
Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. Antistatic superstructure, consisting of the carbon impregnated bushing and
9000 Series Power Rocker and Lever Handle Switches
Power and Lever Handle Switches Features/Benefits Thermoset UL 94V-0 housing Rugged construction Variety of actuator and termination options RoHS compliant Typical Applications Small equipment Shut-off
Miniature Switches & Pilot Devices
A8 Series Miniature Switches and Pilot Devices: 8mm Key features of the 21/64" (8mm) A8 series Switches and Pilot Devices include: 21/64" (8mm) round mounting hole Compact Design Saves Space Bright and
Y Series 4, 5 & 6 Tumbler Switchlocks
, 5 & 6 Tumbler s Features/Benefits Anti-static switch exceeds 0 KV DCstatic resistance omentary models available Wire leads and harnesses available Typical Applications Point-of-sale terminals Cash registers
Distinctive Characteristics
Distinctive Characteristics Full face and spot illumination available. Front panel relamping. Choice of super bright LEDs in white, green, and blue in addition to bright red, amber, and green LEDs. Compact
IHS series Hall effect pushbutton switches - bushing Ø 12 mm - momentary
IHS series Hall effect pushbutton switches - bushing Ø 12 mm - momentary Distinctive features and specifications UG1410A Momentary pushbutton (NO) 5 million cycles Low behind-panel depth Standard and high
Pushbutton and key switches
Pushbutton and key switches Section ZP Tiny, metal bushing, momentary 3 SMT TP Tiny, SMT, washable, momentary 5 TP Tiny, washable, momentary 7 9100-9200-9500 Subminiature, momentary 13 IF Miniature, sealed,
Miniature Toggle Switches. Bushing. Termination B solder lug C P.C 1.27width D Quick connect D1 wire wrap(19.05) D3 wire wrap(10.
E L SPECIFICTIS CTCT RTING: @ VC or 8 VC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full load CTCT RESISTNCE: 0 m max. initial @- VC,00 m INSULTI RESISTNCE:,000 M min. IELECTRIC STRENGTH:,00
The following valve actuators are compatible with all Clippard MAV, MAVO, MJV, MJVO, ES-1, & FV series valves.
VALVE ACTUATORS The following valve actuators are compatible with all Clippard MAV, MAVO, MJV, MJVO, ES-1, & FV series valves. One of the most versatile items in the Clippard line. Permits wide circuit
ELECTRO-MECHANICAL MINIATURE SEALED. Long life Solder or PC terminals PanelsealedtoIP67
PUSHBUTTON SWITCHES ELECTRO-MECHANICAL MINIATURE SEALED SERIES 48EM: ACTUAL SIZE FLEX-TECH MINIATURE SEALED PUSHBUTTON SWITCHES This rugged multi-option sealed pushbutton series offers the utmost in choices
4.7. Contents Description Heavy Duty Hesitation Switches. Product Description. Standards and Certifications. Heavy Duty Hesitation Switches
.7 ontents Description Product Selection...................... Technical Data and Specifications.......... Dimensions........................... Page V-T-8 V-T-9 V-T-9 Product Description One-Hole Panel
A02 SERIES PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED Panel cut-out.866" (22mm) or 1.161" x.846" (29.5mm x 21.5mm)
PUSHBUTTON SWITCHES, ILLUMINATED OR NON-ILLUMINATED Panel cut-out.866" (22mm) or 1.161" x.846" (29.5mm x 21.5mm) E A pushbutton assembly requires: Screen + Lamp (if illuminated) + Operator + one or two
S E C Q - E - S T 1-2. Cap/ Sealing Hood (STD) 8.89 B solder lug Q (none) (none) Rubber Hood
T 8 0 1 3 - S E C Q - E - S 2 0 - T 1-2 Switch Function (SPDT) Actuator Bushing Termination Contact Switching Position Model No. S 10.41 E Epoxy Seal Vertical Support Bracket Cap/ Sealing Hood (STD) 8.89
Miniature Switches. Rocker, Toggle, Pushbutton & Slide
Worldwide Headquarters Carling Technologies, Inc., Connecticut, USA (860) 793-928, fax: (860) 793-923 e-mail: sales@carlingtech.com Eastern U.S. and Eastern Canada: (860)586-843, fax: (860) 586-853 e-mail:
M Series Half-inch Rotary Switches
Half-inch Switches Features/Benefits Multi-pole and multi-positions Panel and PCB mounting Stainless steel actuator Non-shorting contacts RoHS Compliant IP67 (F option only) Typical Applications Test equipment