Miniature Switches. Rocker, Toggle, Pushbutton & Slide

Transcription

1 Worldwide Headquarters Carling Technologies, Inc., Connecticut, USA (860) , fax: (860) Eastern U.S. and Eastern Canada: (860) , fax: (860) Midwestern U.S.: (85) , fax: (85) Miniature Switches Rocker, Toggle, Pushbutton & Slide Western U.S., Western Canada, Mexico and South America: (972) , fax: (972) Europe/Middle East/Africa Headquarters Carling Technologies Ltd., Devon, England Int , fax: Int ltd.sales@carlingtech.com Central Europe: Carling Technologies GmbH Int , fax: Int dieter.lettner@carlingtech.com Southern Europe: Carling Technologies SARL Int , fax: Int e.chateauneuf@carlingtech.com Asia-Pacific Headquarters Carling Technologies, Asia-Pacific Ltd., Kowloon, Hong Kong Int , fax: Int sales@carlingtech.com.hk China Int , fax: Int capsh@online.sh.cn Japan Int , fax: Int kaoru.noguchi@carlingtech.com MS60_9_03

2 Carling Technologies Other Carling Technologies Catalogs Transforming Customer Needs into Customer Solutions At Carling Technologies, we do much more than manufacture electrical components. We engineer powerful solutions. Working closely with your product team, we can tailor switching and circuit protection solutions that meet your application needs cost effectively. Thermal Circuit Protectors Switches and Controls This catalog includes This catalog details Since our founding in 920, there are few products we haven t turned on, fewer industries that haven t turned to us. With five ISO registered manufacturing locations and technical sales offices worldwide, Carling Technologies now ranks among the world s largest privately owned manufacturers of hydraulic/magnetic circuit breakers, thermal circuit protectors, electrical switches and assemblies, power distribution centers and electronic control systems. What makes all our switches and controls especially attractive is their superior performance and reliability both hallmarks of Carling Technologies. the Carlingswitch Carling s thermal cir- brand of electrical cuit protection prod- switches for most ucts. Thermal pro- any power switching tectors range from We have over 2000 employees working through offices and manufacturing sites across the globe, providing engineered solutions to leading electronic and industrial OEMs in a variety of industries, including: Electronics (telecom, medical, computers, office automation) Transportation (on/off road vehicles, trucks, buses, boats) Commercial Facilities Control Industrial Controls Appliances Factory Automation need. Included are 0. to 40 amps. rocker, toggle, push- Front Panel Snap-in button, rotary and Mounting styles and sealed switches with Quick Connect a wide variety of cir- Terminals are includ- We look forward to helping you create safe, reliable products that exceed the tough demands of today s applications. You ll find our commitment to excellence consistently delivers Quality by Design, our company s mission. cuits, ratings, terminations, colors, illuminations, ed. Worldwide certifications, including UL500, and legends. Worldwide certifications, UL500, CE TUV and CE marked. marked. Dimmer, Mirror Rotate & Wiper/Washer controls are also included. Our commitment to quality products begins with our investment in research and development. Not only does Carling have a team of highly-qualified engineers on staff, we equip them with the industry s most advanced computer-aided design tools. Our engineering team will work closely with yours to advance your project from initial product concepts to final design and manufacturing. Using industry-leading CAD/CAM software, Carling engineers can evaluate multiple design alternatives as well as develop products, tooling and manufacturing processes concurrently. The result? Functionally superior, aesthetically pleasing products produced faster and at a lower cost. Digital Switching Systems Circuit Protection This catalog details This catalog details the complete line of Carling s Digital Carling circuit protec- Switching Systems, tion products includwe can even share electronic files that can be easily incorporated into the rest of your design. Just one more reason you ll think of Carling as much more than an approved vendor, but rather as a proven partner. including the ing hydraulic/mag- Electronic Control netic circuit break- System III, (ECS III). ers, thermal circuit Our automated call center system ensures that your calls are routed to the right Customer Care person for prompt attention. Our customer care personnel are technically trained to discuss your requirements and provide the advice and services you expect from Carling Technologies. Each member of the Carling Customer Care team is technically trained on our standard products, and Application Engineers are also available to answer your more advanced technical questions. In addition, Carling is proud to offer a global network of fully trained representatives and distributors, who are always ready to service you. The ECS III features protectors, and the latest in digital ground fault break- multiplex technology, ers. Breakers range from 0. to 700 amps Hi-inrush delay curves, Front Panel Snap-in Mounting styles, Rockerguard Bezels, Dual-Coil functions, and Quick Connect Terminals are included. Worldwide certifications, creating a safer and fully configurable control system for the marine environment. The ECS III eliminates complex wiring while increasing switching features and functionality, and simplifies troubleshooting. including UL500, UL489 and CE marked.

3 Contents Carling Technologies Products Within this catalog, you ll find a comprehensive line of miniature and sub-miniature switches, including rocker, toggle, pushbutton, and slide switches, many sealed to IP67, and many certified to UL/CUL under file number E7560, and to CSA under file number LRA9280. We also offer full size switches, hydraulic/magnetic and ground fault circuit breakers, thermal circuit protectors, digital switching systems and power distribution centers. For more information on our other products, please request one of the catalogs listed on the inside back cover of this catalog, or go to:. How To Use This Catalog Please refer to the Product Selector Guide, located on this page, for the type of switch required. Each switch Series is located under an alphabetical code. Each code refers you to the specific pages covering an individual Series. Product features/specifications and dimensional drawings are provided to assist you with product selection. Follow our easy step-by-step catalog number sequence to construct the switch, which meets your needs. An ordering format and an example for constructing a catalog number are provided for each Series. Our website also offers a fast and easy way for you to configure part numbers and check stock on-line for your switch needs. Our on-line product selector will guide you to a valid Series based on your requirements, and the on-line product configurator will help you build a valid part number. A stock check feature is also included at. Product Selector, Configurit, Product pages & PDF files make the Carling Technologies web site your "one stop shop" for quick and thorough product information. Customer Care Center For additional application assistance, we urge you to consult with our experienced staff in our Customer Care Center. Our Technical and Engineering staff has extensive test, research and development capabilities, and have assisted many customers in solving unique design and application problems with standard or customized products. Please refer to our location listing on the back of this catalog, for contact information for your area. We look forward to working with you. R O C K E R T O G G L E P U S H B U T T O N S L I D E Series Sub- Miniature Miniature Sealed Surface Approvals IP67 page Mount S UL, CSA 2-5 SS 2-5 SM 2-6 M UL, CSA 7-2 MS UL, CUL 7-2 2S UL, CSA 3-7 2SM 3-9 2SS 3-7 2M UL, CSA M2 UL, CUL MS UL, CUL S SS 3SM 3MN UL, CUL 3MS UL, CUL IP68 3MA UL, CUL 4S 46,48 4SS M UL, CSA 27-28, , , ,37, ,37, ,47, PM 52 The range of temperatures that switches can perform at may be effected by various factors, including current load, voltage, foreign contaminant s, environmental conditions, frequency of operation, etc. As a result, switches should be tested for suitability under actual application conditions, before making a final product selection. Operating temperature is defined as the temperature of the switch at rated current plus ambient temperature. The product information published in this catalog is subject to change without notice. Modification of material, finishes, technical specifications and agency approvals may occur as part of our continual pursuit of product enhancement. All statements, technical information and recommendations are based on facts and tests we believe to be reliable. The product described may be used in a variety of applications. Since the user s product information, specific use application, and conditions of use are all outside of Carlingswitch s control, IT IS THE RESPONSIBILITY OF THE PURCHASER TO DETERMINE THE SUITABILITY OF THESE PRODUCTS FOR THE PURCHASER S SPECIFIC USE AND THE PURCHASER ASSUMES ALL ASSOCIATED RISKS. The purchaser should review applicable codes and standards such as UL, NEMA, CSA, VDE, OSHA and others for recommended practices and safety standards along with electrical ratings as marked on product to ensure compatibility of product performance to application requirements. Warranty Policy Carling Technologies, Inc. (Seller) warrants that goods sold hereunder shall be free of defects in material and workmanship for one year from date of shipment. In the event of such defects, the Seller s only obligation shall be the replacement or the cost of the defective goods, themselves, excluding, without limitation, labor costs, which are or may be required in connection with the replacement or reinstallation of the goods. This warranty is the Seller s sole obligation and excludes all other remedies or warranties, express or implied, including warranties of merchantability and fitness for a particular purpose, whether or not purposes or specifications are described herein. This Warranty expressly excludes any and all incidental, special and/or consequential damages of any nature. Seller further disclaims any responsibility for injury to person or damage to or loss of property or value caused by any product which has been subjected to misuse, negligence, or accident; or misapplied, or modified or repaired by a person or persons not authorized by the Seller or which have been improperly installed.

4 S-Series Sub-Miniature Rocker Switches S-Series Ordering Scheme Series S-Series Sub-Miniature Rocker Switch SS-Series Sealed Sub-Miniature Rocker Switch SM-Series Sealed Surface Mount Sub-Miniature Rocker Switch S - MSP - R2 / 2 M6 Q 2 Poles 3 Circuit 4 Actuator Style Specifications Contact Rating refer to ordering scheme Electrical Life S-Series: 30,000 make & break full load SS & SM-Series: 50,000 make & break full load Contact Resistance mω max. 2-4 VDC 00mA for both silver & gold plated contacts. Insulation Resistance MΩ min. Dielectric Strength Volts sea level Operating Temperature C to +85 C Index of Protection SS & SM-Series: IP67 Solder Heat Resistance... MIL-STD-202, Method 20 Actuator Travel Materials Case all UL94 V-0 S-Series: Dially phthalate (DAP) SS-Series: Glass filled nylon 6/6, flame retardant, heat stabilized SM-Series: Glass filled nylon 4/6, flame retardant, heat stabilized Rocker S-Series: Nylon (UL 94V-0) SS & SM-Series: Nylon, black standard, internal o-ring sealed Bushing S-Series: Brass, nickel plated SS-Series: Glass filled nylon 6/6, flame retardant, heat stabilized (UL 94V-0) SM-Series: Glass filled nylon 4/6, flame retardant, heat stabilized (UL 94V-0) Housing S-Series: Stainless Steel Switch Support S & SM-Series: Brass, tin plated Terminal Seal Epoxy 5 Actuator Color 6 Termination 7 Contact E 8 Seal SERIES S Sub-Miniature Rocker Switch 2 POLES MSP single pole - uses terminals, 2 & 3. MDP double pole uses terminals,2, 3, 4, 5 & 6. 6 TERMINATION M Solder Lug M2 PCB M6 PC Mount, 90 horizontal M7 PC Mount, 90 vertical VS2 PC Mount, U bracket,.620 mounting x.460 high VS3 PC Mount, U bracket,.620 mounting x.630 high M6 Snap-In, U bracket, 90 horizontal M7 Snap-In, U bracket, 90 vertical VS2 Snap-In, U bracket 3 CIRCUIT ( ) - momentary Switching Position: 2-3, 5-6 OPEN 2-, 5-4 ON NONE ON 2 ON NONE (ON) 3 ON OFF ON 4 (ON) OFF (ON) 5 ON OFF (ON) 4 ACTUATOR STYLE R Small rocker R2 Narrow black rocker 5 ACTUATOR COLOR white 4 orange 7 blue 2 black 5 yellow 8 brown 3 red 6 green 9 gray Black, white and red are standard. Other colors available, consult factory. 7 CONTACT Material Terminal Plating Rating Approvals G silver gold over silver 3 3A@25VAC or 28VDC, UL 250VAC K gold 2 tin-lead 4 0.4VA max (AC/DC) P silver tin-lead 4 3A@25VAC or 28VDC, UL 250VAC Q silver silver 3A@25VAC or 28VDC, UL 250VAC R gold 2 gold 2 0.4VA max (AC/DC) NOTE: Tin-lead option available with PC type terminations only. Moveable contact & terminals: copper alloy, silver plated 2 Moveable contact & terminals: copper alloy with gold plate over nickel plate 3 Terminals: silver plated with outer layer in gold plating 4 Outer terminals: copper alloy with tin-lead over nickel plate 8 E epoxy seal 2

5 S-Series Sub-Miniature Rocker Switches SS-Series Ordering Scheme SS - WMSP - R2 / 2 - M2 G Series 2 Poles 3 Circuit 4 Actuator Style 5 Actuator Color 6 Termination 7 Contact E 8 Seal SERIES SS Sealed Sub-Miniature Rocker Switch 2 POLES WMSP single pole - uses terminals, 2 & 3. WMDP double pole uses terminals, 2, 3, 4, 5 & 6. 3 CIRCUIT ( ) - momentary Switching Position: 2-3, 5-6 OPEN 2-, 5-4 ON NONE ON 2 ON NONE (ON) 3 ON OFF ON 4 (ON) OFF (ON) 5 ON OFF (ON) 4 ACTUATOR STYLE R Small rocker R2 Narrow rocker 5 ACTUATOR COLOR white 4 orange 7 blue 2 black 5 yellow 8 brown 3 red 6 green 9 gray White, black & red are standard. Other colors available for quantities of 5K or more. 6 TERMINATION M Solder Lug M2 PCB M6 PC Mount, 90 horizontal M7 PC Mount, 90 vertical VS2 PC Mount, U bracket,.620 mounting x.460 high M6 Snap-In, U bracket, 90 horizontal M7 Snap-In, U bracket, 90 vertical VS2 Snap-In, U bracket,.620 mounting x.460 high 7 CONTACT Material Terminal Plating Rating G silver gold over silver 3 3A@25VAC or 28VDC, 250VAC K gold 2 tin-lead 4 0.4VA max IP67 (AC/DC) P silver tin-lead 4 3A@25VAC or 28VDC, 250VAC R gold 2 gold 2 0.4VA max IP67 (AC/DC) NOTE: Standard G plating for sealed product. Tin-lead option available with PC type terminations only. Moveable contact & terminals: copper alloy, silver plate 2 Moveable contact & terminals: copper alloy with gold plated over nickel plate 3 Terminals: silver plated with outer layer in gold plating 4 Outer terminals: copper alloy with tin-lead over nickel plate 8 E epoxy seal SM-Series Ordering Scheme SM - WMSP - R2 - M6 G Series 2 Poles 3 Circuit 4 Actuator Style 5 Termination 6 Contact E 7 Seal 8 Packaging SERIES SM Sealed Surface Mount Sub-Miniature Rocker Switch 2 POLES WMSP single pole - uses terminals, 2 & 3. 3 CIRCUIT ( ) - momentary Switching Position: 2-3 OPEN 2- ON NONE ON 2 ON NONE (ON) 3 ON OFF ON 4 (ON) OFF (ON) 5 ON OFF (ON) 4 ACTUATOR STYLE R2 Narrow black rocker 5 TERMINATION M6 Surface Mount, 90 flat - horizontal/side terms S6 Surface Mount, 90 horizontal/back terms S7 Surface Mount, 90 vertical 6 CONTACT Material Terminal Plating Rating G silver gold over silver 3 3A@25VAC or 28VDC, 250VAC K gold 2 tin-lead 4 0.4VA max IP67 (AC/DC) P silver tin-lead 4 3A@25VAC or 28VDC, 250VAC Q silver silver 3A@25VAC or 28VDC, 250VAC R gold 2 gold 2 0.4VA max IP67 (AC/DC) NOTE: Standard G plating for sealed product. P&K for PC mount only. Tin-lead option available with PC type terminations only. Moveable contact & terminals: copper alloy, silver plate 2 Moveable contact & terminals: copper alloy with gold plate over nickel plate 3 Terminals: silver plated with outer layer in gold plating 4 Outer terminals: copper alloy with tin-lead over nickel plate 7 E epoxy seal 8 PACKAGING Switches are bulk packed, unless T/R is specified at the end of the part number. T/R tape reel pieces per reel 3

6 S-Series Sub-Miniature Rocker Switches S-Series Dimensional Specifications: in. [mm] ACTUATOR S.480 [2.20] R Rocker.3 [7.90].256 [6.50].352 [8.95] R2 Narrow Rocker.480 [2.20].256 [6.50].352 [8.95].236 [6.00] SS.250 [6.35].476 [2.0] R Rocker.299 [7.60].3 [7.90] SS & SM R2 Narrow Rocker.250 [6.35].476 [2.0].228 [5.80].3 [7.90].587 [4.90].587 [4.90].579 [4.70].8 [4.60].579 [4.70].58 [4.00].095 [27.80].845 [2.45].3 [7.90] [8.05].58 [4.00] [9.30] [5.0].39 [8.0].252 [6.40].06.8 [3.00].38 [3.50].22 [3.0].39 [8.0].06 [.55].20 [5.0].39 [8.0].06 [.55].358 [9.0].354 [9.00].38 [3.50] [3.05].327 [8.30].362 [9.20] TERMINATION M M2 Standard Solder Lug PCB M M2 Standard Solder Lug PCB.059 [.50].039 [.00].8 [3.00].58 [4.00].039 [.00].30 [3.30] [Ø.09].039 [.00].059 [.50].8 [3.00].58 [4.00].039 [.00].30 [3.30] [Ø.09].028 [0.70] Thk..06 [.55] Thk..06 [.55].028 [0.70].58 [4.00] Thk. Thk. M6.39 [8.0].20 [5.0] [Ø.09].327 [8.30].362 [9.20] [0.85] [0.85] [Ø.09] 4

7 S-Series Sub-Miniature Rocker Switches S-Series Dimensional Specifications: in. [mm] TERMINATION M7.20 [5.0].39 [8.0] [Ø.09] [9.0].40 [0.8].39 [8.0] [Ø.09] VS2.3 [7.90] VS3.3 [7.90] [Ø.09] [Ø.09].350 [8.90].400 [0.6].358 [9.0].400 [0.6].30 [3.30] [0.6].30 [3.30].35 [8.00] VS2 VS3.3 [7.90] [Ø.09].3 [7.90] [Ø.09].350 [8.90].30 [3.30].400 [0.6] [0.6].358 [9.0].30 [3.30].35 [8.00].400 [0.6] M6 SNAP-IN TERMINATION M7 VS2 5

8 S-Series Sub-Miniature Rocker Switches SM-Series Dimensional Specifications: in. [mm] TERMINATION M6.028 [0.70].42 [3.60] [7.27].393 [9.98].43 [3.63].090 [2.29] [3.56] [2.03] [.02].040 [.02] [2.03].28 [3.25].357 [9.07] S6.43 [3.63].40 [3.56].040 [.02].28 [3.25].028 [0.70].42 [3.60] [8.97] [2.03].032 [0.80].079 [2.00].42 [0.70] S7.095 [2.40].028 [0.70] [5.60].73 [4.39].25 [3.8].8 [3.00].25 [3.8].326 [8.27].56 [4.25].079 [2.00].063 [.60] REEL TAPING.60 [5.50].079 [2.00].58 [4.00].06 DIA [Ø.55].04 [0.35].079 DIA [Ø 2.00] [32.00].543 [3.80].787 [20.00].8 [28.40].354 [9.00].0 [2.80].354 [9.00].44 [.20].787 [20.00].05 R [0.38 R].268 [6.80] FOR M6,S6 ONLY 0.69 [.75].795 [20.20].079 [2.00].58 [4.00].059 DIA [Ø.50].079 DIA [Ø 2.00] [44.00].59 [40.40].079 DIA [Ø 2.00].043 [26.50].650 [6.50].02 R [0.30 R] [6.00].248 [6.30].97 [5.00].488 [2.40].97 [5.00] FOR S7 ONLY.59 [5.00] 6

9 M-Series Miniature Rocker & Paddle Switches M-Series Miniature Rocker & Paddle Switch MS-Series Sealed Miniature Rocker & Paddle Switch Specifications Contact Rating refer to ordering scheme. Electrical Life M-Series: 50,000 make & break full load MS-Series: 30,000 make & break full load Contact Resistance mω max. 2-4 VDC 00mA for both silver & gold plated contacts. Insulation Resistance MΩ min. Dielectric Strength Volts sea level Operating Temperature C to +85 C Index of Protection MS-Series: IP67 Solder Heat Resistance... MIL-STD-202, Method 20 Actuator Travel Materials Case M-Series: Dially phthalate (DAP) (UL 94V-0) MS-Series: Glass filled nylon 6/6, flame retardant, heat stabilized (UL 94V-0) Rocker/Paddle M-Series: Nylon (UL 94V-0) MS-Series: Nylon, black standard, internal o-ring sealed Bushing M-Series: Brass, nickel plated MS-Series: Glass filled nylon 6/6, flame retardant, heat stabilized (UL 94V-0) Housing M-Series: Stainless Steel MS-Series: Spring Steel Actuator Pivot & Mounting Bracket M-Series: Stainless Steel MS-Series: Nylon (UL 94V-0) Actuator Pivot Retainer...MS-Series: Stainless Steel Switch Support Brass, tin plated Terminal Seal Epoxy 7

10 M-Series Miniature Rocker & Paddle Switches M-Series Ordering Scheme M - SP - R8 / 2 - M6 Q Series 2 Poles 3 Circuit 4 Actuator Style 5 Actuator Color 6 Frame Color 7 Termination 8 Contact E 9 Seal SERIES M Miniature Rocker Switch 2 POLES SP single pole - uses terminals, 2 & 3. DP double pole uses terminals,2, 3, 4, 5 & 6. 3P double pole uses terminals,2, 3, 4, 5, 6, 7, 8 & 9. 4P double pole uses terminals,2, 3, 4, 5, 6, 7, 8, 9, 0,, 2. 3 CIRCUIT ( ) - momentary Switching Position: 2-3, 5-6, 8-9, -2 OPEN 2-, 5-4, 8-7, -0 ON NONE ON 2 ON NONE (ON) 3 ON OFF ON 4 (ON) OFF (ON) 5 ON OFF (ON) 4 ACTUATOR STYLE R Small rocker R2 Small paddle R3 Medium rocker R4 Large paddle R5 R6 R7 R8 R9 5 ACTUATOR COLOR & 6 FRAME COLOR,2 white 2 black 3 red 4 orange 5 yellow 6 green Black is standard. Other colors available, consult factory for details. 2 Selection 6 is blank if actuator style R8 or R9 (no frame) Large rocker Rocker & frame Paddle & frame Rocker w/out frame Paddle w/out frame 7 blue 8 brown 9 gray 7 TERMINATION M Solder Lug M2 PCB M3 Quick Connect M5- Wire Wrap.750 [9.05] M5-2 Wire Wrap.964 [24.48] M5-3 Wire Wrap.425 [0.80] M5-4 Wire Wrap.062 [26.97] M6 PC Mount, 90 horizontal M7 PC Mount, 90 vertical VS2 PC Mount, U bracket,.620 mounting x.460 high VS3 PC Mount, U bracket,.620 mounting x.630 high VS4 PC Mount, U bracket,.460 high VS5 PC Mount, U bracket,.630 high M6 Snap-In, U bracket, 90 horizontal M7 Snap-In, U bracket, 90 vertical VS2 Snap-In, U bracket,.620 mounting x.460 high VS3 Snap-In, U bracket,.620 mounting x.630 high VS4 Snap-In, U bracket VS5 Snap-In, U bracket 8 CONTACT Material Terminal Plating Rating Approvals G silver gold over silver 3 5A@25VAC or 28VDC, UL CSA 250VAC K gold 2 tin-lead 4 0.4VA max (AC/DC) P silver tin-lead 4 5A@25VAC or 28VDC, UL CSA 250VAC Q silver silver 5A@25VAC or 28VDC, UL CSA 250VAC R gold 2 gold 2 0.4VA max (AC/DC) NOTE: Tin-lead option available with PC type terminations only. Moveable contact & terminals: copper alloy, silver plate 2 Moveable contact & terminals: copper alloy with gold plate over nickel plate 3 Terminals: silver plate with outer layer in gold plating 4 Outer terminals: copper alloy with tin-lead over nickel plate 9 E epoxy seal MS-Series Ordering Scheme MS - SP - R6 - M6 G Series 2 Poles 3 Circuit 4 Actuator Style 5 Termination 6 Contact E 7 Seal SERIES MS Sealed Miniature Rocker Switch 2 POLES SP single pole - uses terminals, 2 & 3. DP double pole uses terminals,2, 3, 4, 5 & 6. 3P double pole uses terminals,2, 3, 4, 5, 6, 7, 8 & 9. 3 CIRCUIT ( ) - momentary Switching Position: 2-3, 5-6, 8-9 OPEN 2-, 5-4, 8-7 ON NONE ON 2 ON NONE (ON) 3 ON OFF ON 4 (ON) OFF (ON) 5 ON OFF (ON) 4 ACTUATOR STYLE R Small rocker R2 Small paddle R3 Medium rocker R4 Large paddle R5 R6 R7 R8 R9 Large rocker Rocker & frame Paddle & frame Rocker w/out frame Paddle w/out frame 5 TERMINATION M Solder Lug M2 PCB M3 Quick Connect M5- Wire Wrap.750 [9.05] M5-2 Wire Wrap.964 [24.48] M5-3 Wire Wrap.425 [0.80] M5-4 Wire Wrap.062 [26.97] M6 PC Mount, 90 horizontal M7 PC Mount, 90 vertical VS2 PC Mount, U bracket,.620 mounting x.460 high VS3 PC Mount, U bracket,.620 mounting x.630 high VS4 PC Mount, U bracket,.460 high VS5 PC Mount, U bracket,.630 high VS2 Snap-In, U bracket,.620 mounting x.460 high VS3 Snap-In, U bracket,.620 mounting x.630 high VS4 Snap-In, U bracket VS5 Snap-In, U bracket 6 CONTACT Material Terminal Plating Rating Approvals G silver gold over silver 3 5A@25VAC or 28VDC, UL CUL 250VAC K gold 2 tin-lead 4 0.4VA max (AC/DC) P silver tin-lead 4 5A@25VAC or 28VDC, UL CUL 250VAC R gold 2 gold 2 0.4VA max (AC/DC) NOTE: Tin-lead option available with PC type terminations only. Moveable contact & terminals: copper alloy, silver plate 2 Moveable contact & terminals: copper alloy with gold plate over nickel plate 3 Terminals: silver plate with outer layer in gold plating 4 Outer terminals: copper alloy with tin-lead over nickel plate 7 E epoxy seal 8

11 M-Series Miniature Rocker Switches M-Series Dimensional Specifications: in.[mm] ACTUATOR R.095 DIA [Ø 2.40].370 [9.40] REAR PANEL MOUNT.65 [29.60].276 [7.00].55 [4.00].35 [8.00].6 [4.0].370 [9.40].55 [4.00].35 [8.00].937 [23.80] R2.095 DIA [Ø 2.40].370 [9.40].65 [29.60].937 [23.80] REAR PANEL MOUNT.276 [7.00].084 [2.3].332 R [8.43 R] [8.72].6 [4.0].366 [9.30].084 [2.3].332 R [8.43 R] [8.83] R3.8 DIA.626 [5.90] 3.78 [35.00].634 [4.50] REAR PANEL MOUNT.52 [3.00].906 [23.00].35 [8.00].52 [3.85].626 [5.90].034 [26.26].906 [23.00].35 [8.00] R4.8 DIA.626 [5.90] REAR PANEL MOUNT.634 [4.50] 3.78 [35.00].52 [3.00].098 [2.50].899 [22.83] [30.03].595 [5.0].053 [26.75].098 [2.50].899 [22.83] [30.03].54 [3.90] R5.56 [3.0].606 [5.40] REAR PANEL MOUNT.465 [.80].333 [33.85].54 [3.90].606 [5.40].307 [33.20].465 [.80].333 [33.85].8 DIA.626 [4.30] [0.60] [47.30] R6/R8.64 [5.60] SNAP-IN.784 [9.90].44 [.20].095 [2.40] PANEL MOUNTING.005 R [0.3 R] MAX. TYP..600 [5.24] R7/R9.64 [5.60] SNAP-IN.784 [9.90].047 [.9] TO.25 [3.8] PANEL THICKNESS.095 [2.40].453 [.50].295 [7.50].095 [2.40].047 [.9] TO.25 [3.8] PANEL THICKNESS.8 [3.00].295 [7.50] R8 and R9 are without frame. Actuators are as shown. 9

12 M-Series Miniature Rocker Switches MS-Series Dimensional Specifications: in.[mm] ACTUATOR R.095 DIA [Ø 2.40].347 [8.80].58 [29.40] REAR PANEL MOUNT.370 [9.40].3 [3.33].55 [4.00].35 [8.00].059 [.50].079 [2.00].370 [9.40].55 [4.00].35 [8.00].937 [23.80] R2 REAR PANEL MOUNT DIA [Ø 2.40].347 [8.80].58 [29.40].366 [9.30].084 [2.3].332 R [8.43 R].736 [8.70].079 [2.00].98 [23.3].366 [9.30].084 [2.3].332 R [8.43 R].74 [8.83].937 [23.80].3 [3.33].059 [.50] R3.034 [26.26] REAR PANEL MOUNT.59 [4.05].906 [23.00].35 [8.00].034 [26.26].906 [23.00].35 [8.00].626 [5.90].626 [5.90].00 [0.25] R4.595 [5.0] REAR PANEL MOUNT.098 [2.50].053 [26.75].89 [4.80].64 [29.56].595 [5.0].053 [26.75].098 [2.50].899 [22.83] [30.03].00 [0.25].59 [4.05] R5.307 [33.20] REAR PANEL MOUNT.333 [33.85].307 [33.20].465 [.80].333 [33.85].606 [5.40].465 [.80].606 [5.40] R7 SNAP-IN.784 [9.90].095 [2.40].453 [.50].095 [2.40].64 [5.60].047 [.9] TO.25 [3.8] PANEL THICKNESS.295 [7.50] 0

13 M-Series Miniature Rocker Switches M-Series Dimensional Specifications: in.[mm] TERMINATION M-Series M SOLDER LUG [2.02].56 [3.95] M2 PCB M3 QUICK CONNECT [2.03].047 [.20].062 [.57] THK THK THK MS-Series M SOLDER LUG.078 [.98].44 [3.65] M2 PCB M3 QUICK CONNECT M5 WIRE WRAP OPTION CODE DIM. "A".047 [.20] [2.03].9 [4.84].062 [.57].9 [4.84] "A" M5- M5-2 M5-3 M [9.05].964 [24.48].425 [0.80].062 [26.97] THK THK THK THK M-Series M6.05 [.30] [.40] THREE POLE [.27].565 [4.35].650 [6.50].565 [4.35]

14 M-Series Miniature Rocker Switches M-Series Dimensional Specifications: in.[mm] TERMINATION M7.88 [4.78].25 [5.46].449 [.40].88 [4.78].25 [5.46] THREE POLE.650 [6.50].88 [4.78].565 [4.35].25 [5.46].565 [4.35].565 [4.35] VS2 & VS3 SINGLE POLE DOUBLE POLE OPTION CODE VS2 VS3 DIM. "A".460 [.68].630 [6.00].25 [3.8].32 [8.5] "A".620 [5.75].25 [3.8].63 [4.5].620 [5.75].25 [3.8].32 [8.5] "A".25 [3.8].620 [5.75] VS4 & VS5 OPTION CODE VS4 VS5 DIM. "A".460 [.68].630 [6.00].250 [6.35].362 [9.20] SINGLE POLE "A".250 [6.35].750 [9.05].63 [4.5].750 [9.05].250 [6.35].362 [9.20] DOUBLE POLE "A".250 [6.35].750 [9.05] U4 & VS5 OPTION CODE U4 VS5 DIM. "A".55 [4.00].630 [6.00].250 [6.35].362 [9.20] THREE POLE "A".750 [9.05].250 [6.35].750 [9.05] 2

15 2S-Series Sub-Miniature Toggle Switches 2S-Series Ordering Scheme SERIES 2S Sub-Miniature Toggle Switch 2 POLES MSP single pole - uses terminals, 2 & 3. MDP double pole uses terminals,2, 3, 4, 5 & 6. 3 CIRCUIT ( ) - momentary Series 4 ACTUATOR STYLE T Round toggle.358 length T2 Round toggle.220 length 2S-Series Sub-Miniature Toggle Switch 2SS-Series Sealed Sub-Miniature Toggle Switch 2SM-Series Sealed Surface Mount Sub-Miniature Toggle Switch Switching Position: 2-3, 5-6 OPEN 2-, 5-4 ON NONE ON 2 ON NONE (ON) 3 ON OFF ON 4 (ON) OFF (ON) 5 ON OFF (ON) 3 Circuit T3 Round toggle.299 length T4 Round toggle.433 length 4 Actuator Style Contact Rating refer to ordering scheme Electrical Life ,000 make & break full load Contact Resistance mω max. 2-4 VDC 00mA for both silver & gold plated contacts. Insulation Resistance MΩ min. Dielectric Strength Volts sea level Operating Temperature C to +85 C Index of Protection SS & 2SM-Series: IP67 Solder Heat Resistance... MIL-STD-202, Method 20 Actuator Travel Materials Case all UL 94 V-0 2S-Series: Dially phthalate (DAP) 2SS-Series: Glass filled nylon 6/6, flame retardant, heat stabilized 2SM-Series: Glass filled nylon 4/6, flame retardant, heat stabilized Toggle S-Series: Brass, chrome plated. 2SS & 2SM-Series: Brass, chrome plated or nylon, internal o-ring sealed Bushing S-Series: Brass, nickel plated 2SS-Series: Glass filled nylon 6/6, flame retardant, heat stabilized (UL 94V-0) 2SM-Series: Glass filled nylon 4/6, flame retardant, heat stabilized (UL 94V-0) Housing Stainless Steel Switch Support Brass, tin plated Terminal Seal Epoxy 2S - MSP - T - B4 - M6 Q 2 Poles 5 BUSHING B Threaded Standard, keyway B2 Non-Threaded Standard, keyway B3 Threaded Short, keyway B4 Non-Threaded Short, keyway B5 High Torque, 7.5mm, flat B6 High Torque, 8.0mm, keyway B7 Long threaded B8 Metric Note: All Switches come with standard nut, washer and locking ring shipped bulk. B5 & B7 bushing styles use small locking ring. Specifications 6 TERMINATION M Solder Lug M2 PCB M6 PC Mount, 90 horizontal M7 PC Mount, 90 vertical VS2 PC Mount, U bracket,.620 mounting x.460 high VS3 PC Mount, U bracket,.620 mounting x.630 high VS2 Snap-In, U bracket 7 CONTACT Material Terminal Plating Rating Approvals G silver gold over silver 3 3A@25VAC or 28VDC, UL 250VAC K gold 2 tin-lead 4 0.4VA max (AC/DC) P silver tin-lead 4 3A@25VAC or 28VDC, UL 250VAC Q silver silver 3A@25VAC or 28VDC, UL 250VAC R gold 2 gold 2 0.4VA max (AC/DC) NOTE: Tin-lead option available with PC type terminations only. Moveable contact & terminals: copper alloy, silver plate 2 Moveable contact & terminals: copper alloy with gold plated over nickel plate 3 Terminals: silver plate with outer layer in gold plating 4 Outer terminals: copper alloy with tin-lead over nickel plate 8 E epoxy seal 6 Termination 3 5 Bushing 7 Contact E 8 Seal

16 2S-Series Sub-Miniature Toggle Switches 2SS-Series Ordering Scheme 2SS - MSP - T - B4 - M6 G Series 2 Poles 3 Circuit 4 Actuator Style 5 Bushing 6 Termination 7 Contact E 8 Seal SERIES 2SS Sealed Sub-Miniature Toggle Switch 2 POLES MSP single pole - uses terminals, 2 & 3. MDP double pole uses terminals,2, 3, 4, 5 & 6. 3 CIRCUIT ( ) - momentary Switching Position: 2-3, 5-6 OPEN 2-, 5-4 ON NONE ON 2 ON NONE (ON) 3 ON OFF ON 4 (ON) OFF (ON) 5 ON OFF (ON) 4 ACTUATOR STYLE T Round toggle.358 length T2 Round toggle.220 length T3 Round toggle.299 length T4 Round toggle.433 length 5 BUSHING B4 Unthreaded bushing P ESD resistant plastic toggle.42 length P2 ESD resistant plastic toggle.272 length 6 TERMINATION M2 PCB M6 PC Mount, 90 horizontal M6 Snap-In PC Mount, 90 horizontal M7 PC Mount, 90 vertical M7 Snap-In PC Mount, 90 vertical VS2 PC Mount, U bracket,.620 mounting x.460 high VS2 Snap-In, U bracket 7 CONTACT Material Terminal Plating Rating G silver gold over silver 3 3A@25VAC or 28VDC, 250VAC K gold 2 tin-lead plated 4 0.4VA max IP67 (AC/DC) P silver tin-lead plated 4 3A@25VAC or 28VDC, 250VAC R gold 2 gold plated 2 0.4VA max IP67 (AC/DC) NOTE: Tin-lead option available with PC type terminations only. Moveable contact & terminals: copper alloy, silver plate 2 Moveable contact & terminals: copper alloy with gold plate over nickel plate 3 Terminals: silver plate with outer layer in gold plating 4 Outer terminals: copper alloy with tin-lead over nickel plate 8 E epoxy seal 2SM-Series Ordering Scheme 2SM - MSP - T - M6 G Series 2 Poles 3 Circuit 4 Actuator Style 5 Termination 6 Contact E 7 Seal 8 Packaging SERIES 2SM Sealed Surface Mount Sub-Miniature Toggle Switch 2 POLES MSP single pole - uses terminals, 2 & 3. 3 CIRCUIT ( ) - momentary Switching Position: 2-3 OPEN 2- ON NONE ON 2 ON NONE (ON) 3 ON OFF ON 4 (ON) OFF (ON) 5 ON OFF (ON) 4 ACTUATOR STYLE T Round toggle.358 length T2 Round toggle.220 length P ESD resistant plastic toggle.42 length P2 ESD resistant plastic toggle.272 length 5 TERMINATION M6 Surface Mount, 90 flat M7 Surface Mount, 90 vertical S6 Surface Mount, 90 horizontal 6 CONTACT Material Terminal Plating Rating G silver gold over silver 3 3A@25VAC or 28VDC, 250VAC K gold 2 tin-lead plated 4 0.4VA max IP67 (AC/DC) P silver tin-lead plated 4 3A@25VAC or 28VDC, 250VAC R gold 2 gold plated 2 0.4VA max IP67 (AC/DC) NOTE: Tin-lead option available with PC type terminations only. Moveable contact & terminals: copper alloy, silver plate 2 Moveable contact & terminals: copper alloy with gold plate over nickel plate 3 Terminals: silver plate with outer layer in gold plating 4 Outer terminals: copper alloy with tin-lead over nickel plate 7 E epoxy seal 8 PACKAGING Switches are bulk packed, unless T/R is specified at the end of the part number. T/R tape reel pieces per reel 4

17 2S-Series Sub-Miniature Toggle Switches 2S-Series Dimensional Specifications: in. [mm] 2S-Series ACTUATOR T T2 Round Bat Round Short Bat.098 DIA [Ø 2.50].358 [9.0].220 [5.60].098 DIA [Ø 2.50].299 [7.60] T3 Round Bat.098 DIA [Ø 2.50] T4 Long Round Bat.433 [.00].098 DIA [Ø 2.50] BUSHING B Threaded, Flat B5 Threaded, Flat B2 Non-Threaded, Flat.73 [4.40] FLAT 0-48 UNS.27 [5.50] B6 Non-Threaded, Flat.276 DIA [Ø 7.00].224 FLAT [5.70] /4-40 UNS.3 [7.90] B3 Threaded Keyway B4 Non-Threaded Keyway.032 [0.80] 0-48 UNS B7 Threaded Keyway B8 Non-Threaded Keyway.039 [.00] /4-40 UNS.27 [5.50].284 DIA [Ø 7.20].08 [0.45] PANEL MOUNTING 0-48 BUSHING (B,B2,B3,B4 BUSHINGS) /4 IN. BUSHING (B5,B6,B7,B8 BUSHINGS).023 [0.58].95 DIA [Ø 4.95].95 DIA [Ø 4.95].240 [6.0].033 [0.85].250 DIA [Ø 6.35].250 DIA [Ø 6.35].240 [6.0].250 DIA [Ø 6.35].00 [0.25] Without Locking Ring.79 [4.55].95 DIA [Ø 4.95].094 DIA [Ø 2.38] With Small Locking Ring.022 [0.55] Without Locking Ring.234 [5.94].094 DIA [Ø 2.38] With Small Locking Ring 2SS-Series ACTUATOR T T2 T3 T4 P ESD Resistant Plastic Toggle P2 ESD Resistant Plastic Toggle.098 DIA [Ø 2.50].098 DIA [Ø 2.50].42 [0.70].240 [6.0].342 [8.70].098 DIA [Ø 2.50]. 55 [4.00].098 DIA [Ø 2.50]. 42 [0.70].098 DIA [Ø 2.50].268 [6.80].098 DIA [Ø 2.50] BUSHING B4.77 [4.50].77 DIA [Ø 4.50] NOTE: Subtract 2.55mm from toggle length for B bushing. 5

18 2S-Series Sub-Miniature Toggle Switches 2S-Series Dimensional Specifications: in. [mm] TERMINATION 2S-Series M Standard Solder Lug [.50] [3.00].58 [4.00].039 [.00] M2 PCB.30 [3.30] [Ø.09] M Standard Solder Lug.039 [.00].8 [3.00].58 [4.00].039 [.00] M2 PCB.30 [3.30] [Ø.09].028 [0.70] Thk..06 [.55] Thk..06 [.55].58 [4.00] Thk. Thk. 2SS-Series M2 Epoxy Seal Epoxy Seal.22 [3.0].20 [3.05] 2S-Series M6.73 [4.40].220 [5.60].236 [6.00].39 [8.0] [Ø.09].236 DIA [Ø 6.00].035 [0.90].89 DIA [Ø 4.80].098 DIA [Ø 2.50] [0.85].20 [5.0].236 DIA [Ø 6.00].73 [4.40].89 DIA [Ø 4.80].220 [5.60].098 DIA [Ø 2.50].034 [0.85] [6.00].358 [9.0].39 [8.0] [Ø.09] 6

19 2S-Series Sub-Miniature Toggle Switches 2S-Series Dimensional Specifications: in. [mm] M7 TERMINATION.73 [4.40].220 [5.60].236 [6.00].20 [5.0].236 DIA [Ø 6.00].89 DIA [Ø 4.80].098 DIA [Ø 2.50].39 [8.0] [Ø.09] DIA [Ø 6.00].73 [4.40].89 DIA [Ø 4.80].220 [5.60].098 DIA [Ø 2.50].236 [6.00].39 [8.0].358 [9.0] [Ø.09].06 VS2-VS3 U Bracket Snap-in.89 DIA [Ø 4.80].30 [3.30] VS2.350 [8.90].236 DIA [Ø 6.00].35 [8.00].30 [3.30] VS3.358 [9.0].220 [5.60] [25.4] 4.00 [0.6].236 [6.00] [Ø.09].400 [0.6] VS2 [Ø.09].400 [0.6] VS3 VS2 VS3.89 DIA [Ø 4.80].30 [3.30].350 [8.90].236 DIA [Ø 6.00].35 [8.00].30 [3.30].358 [9.0].220 [5.60] [25.4] 4.00 [0.6].236 [6.00] [Ø.09].400 [0.6] VS2 [Ø.09].400 [0.6] VS3 SNAP-IN TERMINATION M6 M7 VS2 M6,M7,VS2 have the same P.C. mounting but with snap-in bracket. 7

20 2S-Series Sub-Miniature Toggle Switches 2SM-Series Dimensional Specifications: in. [mm] ACTUATOR T Round Bat T2 Round Bat P ESD Resistant Plastic Toggle P2 ESD Resistant Plastic Toggle.425 [0.80].098 DIA [Ø 2.50].240 [6.0].098 DIA [Ø 2.50].425 [0.80].098 DIA [Ø 2.50].268 [6.80].098 DIA [Ø 2.50] For S6,M7 Only TERMINATION M6 90 Horizontal.77 DIA [Ø 4.50].39 [8.0].393 [9.98].42 [3.60].226 [5.75].098 [2.50] [7.27].240 [6.0].6 [4.0].6 [4.0].280 [7.0].43 [3.63].40 [3.56] [2.03].090 [2.29].040 [.02].040 [.02] [2.03].28 [3.25].357 [9.07] M7 90 Vertical.77 DIA [Ø 4.50].8 [3.00].240 [6.0].098 DIA [Ø 2.50].6 [4.0].366 [9.30].280 [7.0].27 [5.50].6 [4.0] [5.60].8 [3.00].25 [3.8].25 [3.8].73 [4.39].326 [8.27].56 [4.25].079 [2.00].063 [.60] S6 90 Horizontal.77 DIA [Ø 4.50].39 [8.0].42 [3.60].226 [5.75].240 [6.0].098 [2.50].06.6 [4.0].353 [8.97].6 [4.0].280 [7.0].43 [3.63].40 [3.56] [2.03].032 [0.80].040 [.02].079 [2.00].28 [3.25].42 [0.70] 8

21 2S-Series Sub-Miniature Toggle Switches 2SM-Series Dimensional Specifications: in. [mm] REEL TAPING.228 [5.80].33 [8.40].069 [.75].58 [4.00].079 [2.00].059 DIA [Ø.50].04 [0.35].89 [20.80].45 [0.55].079 DIA [Ø 2.00].098 [2.50] [32.00].8 [28.40].488 [2.40].453 [.50] [6.00].248 [6.30] FOR M6 ONLY.272 [6.90].07 [.80].58 [4.00].063 DIA [Ø.60].394 [0.00].354 [9.00].305 [7.75].4 [28.30].504 [2.80].732 [44.00].598 [40.60] 6.0 [5.50].866 [22.00].252 [6.40].97 [5.00].386 [9.80].59 [5.00].098 [2.50].634 [6.0].04 [0.35].35 [8.00].236 [6.00] FOR M7 ONLY.97 [5.00].069 [.75].58 [4.00].079 [2.00].059 DIA [Ø.50] DIA [Ø.50].559 [4.20].68 [5.70].42 [0.70].039 [.00] [32.00].8 [28.40].882 [22.40].339 [8.60].472 [2.00] [6.00].29 [7.40].244 [6.20] FOR S6 ONLY 9

22 2M-Series Miniature Toggle Switches 2M-Series Miniature Toggle Switch 2MS-Series Sealed Nylon Miniature Toggle Switch 2M2-Series Nylon Miniature Toggle Switch Specifications Contact Rating refer to ordering scheme Electrical Life ,000 make & break full load Contact Resistance mω max. 2-4 VDC 00mA for both silver & gold plated contacts. Insulation Resistance MΩ min. Dielectric Strength Volts sea level Operating Temperature C to +85 C Index of Protection MS-Series: IP67 Solder Heat Resistance... MIL-STD-202, Method 20 Actuator Travel Materials Case M-Series: Dially phthalate (DAP) (UL 94V-0) 2MS & 2M2-Series: Glass filled nylon 6/6, flame retardant, heat stabilized (UL 94V-0) Toggle M-Series: Brass, chrome plated. 2MS & 2M2-Series: Brass, chrome plated, internal o-ring sealed Bushing M-Series: Brass, nickel plated 2MS & 2M2-Series: Glass filled nylon 6/6, flame retardant, heat stabilized (UL 94V-0) Housing Stainless Steel Switch Support Brass, tin plated Terminal Seal Epoxy 2M-Series Accessories To order accessories assembled on a switch, specify the switch number followed by the accessory part number and the word assembled. Ex: 2M-SP-T-B-MQE-T2ASSEMBLED To order accessories in bulk, specify the Series, followed by the accessory. Ex.) 2M-T2. Optional Toggle Cap 2M Series - T 2 2 Toggle Cap Size 3 Color SERIES OR SWITCH CATALOG NUMBER 2M, 2MS or 2M2 2 TOGGLE CAP SIZE T 0.6mm T2 7.6mm Optional Dress and Knurled Nuts 2M Series - 2 Nut 3 CAP COLOR white 2 black HDW3 3 red 5 yellow 6 green 7 blue NOTE Black, white & red are standard. Additional colors available. Consult factory. SERIES OR SWITCH CATALOG NUMBER 2M, 2MS or 2M2 2 NUT HDW3 HDW5 dress nut for /4 bushing knurled nut for 5/32 bushing (2M-Series only) Optional Rubber Hood 2M - EA Series 2 Rubber Hood SERIES OR SWITCH CATALOG NUMBER 2M, 2MS or 2M2 2 RUBBER HOOD EA rubber hood sealing (for all bushings except B0). 20

23 2M-Series Miniature Toggle Switches 2M-Series Ordering Scheme 2M - SP - T - B - M Q Series 2 Poles 3 Circuit 4 Actuator 5 Bushing 6 Termination 7 Contact E 8 Seal SERIES 2M Miniature Toggle Switch 2 POLES SP single pole - uses terminals, 2 & 3. DP double pole uses terminals,2, 3, 4, 5 & 6. 3P three pole uses terminals, 2, 3, 4, 5, 6, 7, 8 & 9. 4P four pole uses terminals, 2, 3, 4, 5, 6, 7, 8, 9, 0 &. 3 CIRCUIT ( ) - momentary Switching Position: 2-3, 5-6, 8-9, -2 OPEN 2-, 5-4, 8-7, -0 ON NONE ON 2 ON NONE (ON) 3 ON OFF ON 4 (ON) OFF (ON) 5 ON OFF (ON) 6 ON ON ON NOTE: ON-ON-ON available with DP and 4P switches only. 4 ACTUATOR T round bat T2 round short bat T3 paddle T4 medium paddle T5 long paddle T6 flat (with B,B2 or B5 bushing) T7 large bat (with B0 bushing) T8 T9 T0 TA TI TL extra-large bat (with B0 bushing) black plastic rectangular locking lever locking lever locking lever 5 BUSHING B Threaded Standard, keyway B2 Non-Threaded Standard, keyway B3 Threaded Short, keyway B4 Non-Threaded Short, keyway B5 High Torque, 7.5mm, flat B6 High Torque, 8.0mm, keyway B7 Long threaded B8 2 Metric B9 Splashproof B0 5/32 Threaded (Standard for T7 and T8 actuator styles) 6 TERMINATION M Solder Lug M2 PCB M3 Quick Connect M5- Wire Wrap.750 [9.05] M5-2 Wire Wrap [24.48] M5-3 Wire Wrap [0.80] M5-4 Wire Wrap [26.97] M6 PC Mount, 90 horizontal M7 PC Mount, 90 vertical VS2 PC Mount, U bracket,.620 mounting x.460 high VS3 PC Mount, U bracket,.620 mounting x.630 high VS4 PC Mount, U bracket,.750 mounting x.460 high VS5 PC Mount, U bracket,.750 mounting x.630 high VS2 Snap-In, U bracket 7 CONTACT Material Terminal Plating Rating Approvals G silver gold over silver 3 5A@25VAC or 28VDC, UL CSA 250VAC K gold 2 tin-lead 4 0.4VA max (AC/DC) P silver tin-lead 4 5A@25VAC or 28VDC, UL CSA 250VAC Q silver silver 5A@25VAC or 28VDC, UL CSA 250VAC R gold 2 gold 2 0.4VA max (AC/DC) NOTE: Tin-lead option available with PC type terminations only. Moveable contact & terminals: copper alloy, silver plate 2 Moveable contact & terminals: copper alloy with gold plate over nickel plate 3 Terminals: silver plate with outer layer in gold plating 4 Outer terminals: copper alloy with tin-lead over nickel plate 8 E epoxy seal NOTES: All switches come with standard nut, washer and locking ring shipped bulk. T7 and T8 actuator styles come with a larger nut, washer and locking ring, to accommodate the switch. Additional nut styles available. See page 26. Custom colors available, consult factory. Rubber seal available. Order part number EA separately. 2

24 2M-Series Miniature Toggle Switches 2MS & 2M2-Series Ordering Scheme 2MS - WSP - T - B - M G Series 2 Poles 3 Circuit 4 Actuator Style 5 Bushing 6 Termination 7 Contact E 8 Seal SERIES 2MS Sealed Nylon Miniature Toggle Switch 2M2 Nylon Miniature Toggle Switch 2 POLES WSP single pole - uses terminals, 2 & 3. WDP double pole uses terminals,2, 3, 4, 5 & 6. W3P three pole uses terminals, 2, 3, 4, 5, 6, 7, 8 & 9. 3 CIRCUIT ( ) - momentary Switching Position: 2-3, 5-6, 8-9 OPEN 2-, 5-4, 8-7 ON NONE ON 2 ON NONE (ON) 3 ON OFF ON 4 (ON) OFF (ON) 5 ON OFF (ON) 4 ACTUATOR STYLE T round bat T2 round short bat T9 long black plastic 5 BUSHING B Threaded Standard, keyway for ST, PC termination B4 Non-Threaded Short, keyway for H9, V9 termination 6 TERMINATION M Solder Lug M2 PCB M3 Quick Connect M6 PC Mount, 90 horizontal M7 PC Mount, 90 vertical VS2 PC Mount, U bracket,.620 mounting x.460 high VS3 PC Mount, U bracket,.620 mounting x.630 high VS4 PC Mount, U bracket,.750 mounting x.460 high VS5 PC Mount, U bracket,.750 mounting x.630 high VS2 Snap-In, U bracket VS4 Snap-In, U bracket 7 CONTACT Material Terminal Plating Rating 2MS-Series Approvals G silver gold over silver 3 5A@25VAC or 28VDC, UL CUL IP67 250VAC K gold 2 tin-lead 4 0.4VA max (AC/DC) P silver tin-lead 4 5A@25VAC or 28VDC, UL CUL IP67 250VAC R gold 2 gold 2 0.4VA max (AC/DC) Moveable contact & terminals: copper alloy, silver plated 2 Moveable contact & terminals: copper alloy with gold plate over nickel plated 3 Terminals: silver plated with outer layer in gold plating 4 Outer terminals: copper alloy with tin-lead over nickel plated 8 E epoxy seal NOTE: All switches come with standard nut, washer and locking ring. T7 and T8 actuator styles come with a larger nut, washer and locking ring, to accommodate the switch. 2M-Series Dimensional Specifications: in. [mm] 2MS & 2M2-Series T ROUND BAT ACTUATOR T2 ROUND SHORT BAT T9 BLACK PLASTIC.8 DIA.496 [2.67].06 DIA [Ø 2.70].299 [7.6].067 DIA [Ø.70] SUBTRACT 2.55 FOR B BUSHING SUBTRACT 2.55 FOR B BUSHING.764 [9.40].764 [9.4] 22

25 2M-Series Miniature Toggle Switches 2M-Series title Dimensional Specifications: in. [mm] 2M-Series ACTUATOR T ROUND BAT T2 ROUND SHORT BAT T3 PADDLE.34 DIA [ Ø 3.40] T4 MEDIUM PADDLE.30 DIA [Ø 3.30] T5 LONG PADDLE.30 DIA [ Ø 3.30].8 DIA DIA [Ø 2.70].23 [5.40].559 [4.20].650 [6.50].843 [2.40] DIMENSION =.46 [.70] WITH NON THREADED BUSHING B4 T6 FLAT DIMENSION =.264 [6.70] WITH NON THREADED BUSHING B4 T7 LARGE BAT DIMENSION =.34 [3.40] WITH NON THREADED BUSHING B4 T8 EXTRA LARGE BAT DIMENSION =.05 [7.90] WITH NON THREADED BUSHING B4 T9 BLACK PLASTIC T0 RECTANGULAR.97 DIA [ Ø 5.00].476 [2.0] 5/32-32NS KEYWAY.236 DIA [Ø 6.00].46 [.70].443 [.25] 5/32-32NS KEYWAY.236 DIA [Ø 6.00].689 [7.50].443 [.25].677 [7.20].067 DIA [Ø.70].492 [2.50].47 [.60].098 DIA [Ø 2.50] WITH BUSHING OPTIONS B,B2,B5 ONLY TA LOCKING LEVER CURVED WITH TAPERED STEM FOR T7,T8, ACTUATOR, BUSHING OPTION CODE IS NOT REQUIRED. ALL OTHER ACTUATOR LENGTHS SHOWN WITH BUSHING B. TI LOCKING LEVER CURVED WITH STRAIGHT STEM TL LOCKING LEVER ROUNDED WITH TAPERED STEM.573 [4.56].573 [4.56].573 [4.56] CIRCUIT FOR SP-, DP- 3P-, 4P- ONLY CIRCUIT 3 FOR SP-3, DP-3 3P-3, 4P-3 ONLY CIRCUIT FOR SP-, DP- 3P-, 4P- ONLY CIRCUIT 3 FOR SP-3, DP-3 3P-3, 4P-3 ONLY FOR SP-, DP- 3P-, 4P- ONLY FOR SP-3, DP-3 3P-3, 4P-3 ONLY BUSHING.039 [.00] B STANDARD KEYWAY THREADED SHOWN B2 STANDARD KEYWAY NON-THREADED.024 [0.60].240 DIA [Ø 6.0].039 [.00] B3 SHORT KEYWAY THREADED SHOWN B4 SHORT KEYWAY NON-THREADED.026 [0.65].244 DIA [Ø 6.20].35 DIA [Ø 8.00].224 [5.70] B5 7.5mm FLAT HIGH TORQUE.244 DIA [Ø 6.20] Mfg. Option Relief or Imperf. Thd..039 [.00] B6 8.0mm FLAT HIGH TORQUE.028 [0.70].244 DIA [Ø 6.20].35 DIA [Ø 8.00] Mfg. Option Relief or Imperf. Thd. /4-40NS.354 [9.00] /4-40NS.280 [7.0].295 [7.50].039 [.00].35 [8.00].039 [.00] B7 LONG THREADED.039 [.00] B8 METRIC.35 DIA [Ø 8.00] K METRIC BOOT B9 SPLASH-PROOF.465 DIA [ Ø.80] B0 5/32" THREADED BUSHING.236 DIA [Ø 6.00].35 DIA.244 DIA [Ø 8.00] [Ø 6.20] DIA [0.60].378 [9.60].224 [5.70] Mfg. Option Relief or Imperf. Thd..039 [.00] M6P 0.75 THD.039 [.00] [Ø 5.90].22 [5.60].354 [9.00].472 DIA [Ø 2.00].287 [7.30].224 [5.70] SEALS.295 [7.50].059 [.50] /4-40NS.028 [0.70] 5/32-32NS KEYWAY FOR T7,T8, ACTUATOR, BUSHING OPTION CODE IS NOT REQUIRED. ALL OTHER ACTUATOR LENGTHS SHOWN WITH BUSHING B..46 [.70].443 [.25] 23

26 2M-Series Miniature Toggle Switches title 2M-Series Dimensional Specifications: in. [mm] TERMINATION M SOLDER LUG [2.02].56 [3.95] M2 PCB M3 QUICK CONNECT M5 WIRE WRAP OPTION CODE DIM. "A" [2.03].047 [.20].062 [.57] "A" M5- M5-2 M5-3 M [9.05].964 [24.48].425 [0.80].062 [26.97] THK THK THK THK KEYWAY /4-40NS.8 DIA [9.00].347 [8.80] KEYWAY THIS SIDE.56 [3.95].449 [.40] KEYWAY.354 [9.00] /4-40NS DIA.402 [0.20] THIS MODEL CAN BE PRODUCED WITH ON-ON-ON (3-WAYS) FUNCTION KEYWAY THIS SIDE.56 [3.95] KEYWAY /4-40NS.409 THREE POLE.354 [9.00].476 [2.0] KEYWAY THIS SIDE.652 [6.55].8 DIA.56 [3.95] M6 HORIZONTAL.264 [6.70].06 DIA [Ø 2.70].280 [7.0].264 [6.70].06 DIA [Ø 2.70].280 [7.0].449 [.40] THREE POLE FOUR POLE.299 [7.60].72 [8.30].650 [6.50].06 DIA [Ø 2.70].565 [4.35].565 [4.35] 24

27 2M-Series Miniature Toggle Switches title 2M-Series Dimensional Specifications: in. [mm] TERMINATION M7 & PC MOUNT VERTICAL.264 [6.70].280 [7.0] 449 [.40].06 DIA [Ø 2.70] PC MOUNT VERTICAL THREE POLE FOUR POLE.264 [6.70].06 DIA [Ø 2.70].280 [7.0].652 [6.55].565 [4.35].850 [2.60].565 [4.35].565 [4.35] VS2 & VS3 "U" BRACKET PC MOUNT.06 DIA [Ø 2.70].264 [6.70].06 DIA [Ø 2.70] OPTION CODE VS2 VS3 DIM. "A".460 [.68].630 [6.00].25 [3.8] "A".620 [5.75].32 [8.5].25 [3.8].280 [7.0].620 [5.75] "A".32 [8.5].25 [3.8].25 [3.8].620 [5.75] VS4 & VS5 "U" BRACKET PC MOUNT.06 DIA [Ø 2.70].264 [6.70].06 DIA [Ø 2.70] OPTION CODE VS4 VS5 DIM. "A".460 [.68].630 [6.00].362 [9.20] "A".250 [9.20].250 [6.35].750 [9.05].280 [7.0].750 [9.05].362 [9.20] "A".250 [9.20].250 [6.35].750 [9.05] SNAP-IN TERMINATION OPTIONS VS2 SNAP-IN, WITH BRACKET (Same Mounting Pattern as VS2) 25

28 2M-Series Miniature Toggle Switches title 2M-Series Dimensional Specifications: in. [mm] PANEL MOUNTING /4 IN. BUSHING 5/32 IN. BUSHING.033 [0.85].250 DIA [Ø 6.35].240 [6.0].250 DIA [Ø 6.35].065 [.65].496 DIA [Ø.9].022 [0.56].0 DIA [Ø 2.80].250 DIA [Ø 6.35].03 [0.79] DIA [Ø 3.8].496 DIA [Ø.9].234 [5.95].378 [9.60] NUT STANDARD.80 DIA [Ø 4.56] STANDARD.80 DIA [Ø 4.56] DRESS NUT.352 [8.94] STANDARD FOR T7,T8 KNURLED NUT.32 [7.92].275 [6.98].372 DIA [Ø 9.45].562 [4.27].638 DIA [Ø 6.2] /4-40UNS 0-48UNS /4-40UNS 5/32-32NS 5/32-32NS.062 [.57] FOR SER00 (HDW2).060 [.52] FOR SER200 (HDW2) FOR SER00 (HDW3).8 [3.00] FOR SER00 (HDW4).078 [.98] FOR SER00 (HDW5).74 [4.42] LOCKING RING LOCK WASHER STANDARD FOR T7,T8 STANDARD STANDARD FOR T7,T8.476 DIA [Ø 2.0].03 [0.78].252 DIA [Ø 6.40].476 DIA [Ø 2.0].252 DIA [Ø 6.40].78 DIA [Ø 8.24].03 [0.78].034 [0.84].428 DIA [Ø 0.86].25 DIA [Ø 6.38].38 DIA [Ø 8.06].94 DIA [Ø 4.94].620 DIA [Ø 5.74].09 DIA [Ø 2.76] (HDW5).09 DIA [Ø 2.76].063 [.60] (HDW6).478 DIA [Ø 2.4] [.60] [3.5] (HDW7).098 [2.48] Thk [0.52] For Ser 00 (HDW) Thk.02 [0.54] For Ser 200 (HDW22).473 DIA [Ø 2.02] Thk [0.52] For Ser 00 (HDW2) TOGGLE CAPS T T2.47 ±.004 [0.60 ±0.0].299 ±.004 [7.60 ±0.0] 26

29 3S-Series Sub-Miniature Pushbutton Switches 3S-Series Ordering Scheme Series 3S-Series Sub-Miniature Pushbutton Switch 3SS-Series Sealed Sub-Miniature Pushbutton Switch 3SM-Series Sealed Surface Mount Sub-Miniature Pushbutton Switch 3 Circuit Specifications Contact Rating refer to ordering scheme Electrical Life ,000 make & break full load Contact Resistance mω max. 2-4 VDC 00mA for both silver & gold plated contacts. Insulation Resistance MΩ min. Dielectric Strength Volts sea level Operating Temperature C to +85 C Index of Protection SS & 3SM-Series: IP67 Solder Heat Resistance... MIL-STD-202, Method 20 Actuator Travel Materials Case UL S-Series: Dially phthalate (DAP) 3SS-Series: Glass filled nylon 6/6, flame retardant, heat stabilized 3SM-Series: Glass filled nylon 4/6, flame retardant, heat stabilized Plunger S-Series: Thermoplastic polyester, black 3SS -Series: Thermoplastic polyester (UL 94V-0), with internal o-ring seal 3SM-Series: Glass filled nylon 4/6, flame retardant, heat stabilized Bushing S-Series: Brass, nickel plated 3SS-Series: Glass filled nylon 6/6, flame retardant, heat stabilized (UL 94V-0) 3SM-Series: Glass filled nylon 4/6, flame retardant, heat stabilized (UL 94V-0) Housing Stainless Steel Switch Support Brass, tin plated Terminal Seal Epoxy 3S - SP 9 - B6 - M7 - R 2 Poles 4 Bushing 5 Termination 6 Contact E 7 Seal SERIES 3S Sub-Miniature Pushbutton Switch 2 POLES SP single pole 3 CIRCUIT ( ) - momentary 8 ON (ON) 9 OFF (ON) 4 BUSHING B5 B6 B7 B8 B9 B Threaded Unthreaded D Unthreaded /4-40 Threaded D Flush Bushing /4 Unthreaded D 5 TERMINATION M Solder Lug M2 PCB M6 PC Mount, 90 horizontal M6 Snap-In, 90 horizontal M7 PC Mount, 90 vertical M7 Snap-In, 90 vertical VS2 PC Mount, U bracket,.620 mounting x.460 high VS2 Snap-In, U bracket 6 CONTACT Material Terminal Plating Rating G silver gold over silver 3 A@25VAC or 28VDC K gold 2 tin-lead 4 0.4VA max (AC/DC) P silver tin-lead 4 A@25VAC or 28VDC Q silver silver A@25VAC or 28VDC R gold 2 gold 2 0.4VA max (AC/DC) NOTE: Tin-lead option available with PC type terminations only. Moveable contact & terminals: copper alloy, silver plate 2 Moveable contact & terminals: copper alloy with gold plate over nickel plate 3 Terminals: silver plated with outer layer in gold plating 4 Outer terminals: copper alloy with tin-lead over nickel plate 7 E epoxy seal 27

30 3S-Series Sub-Miniature Pushbutton Switches 3SS-Series Ordering Scheme 3SS - WSP 9 - M6 - R Series 2 Poles 3 Circuit 4 Termination 5 Contact E 6 Seal SERIES 3SS Sealed Sub-Miniature Pushbutton Switch 2 POLES WSP single pole WDP double pole 3 CIRCUIT ( ) - momentary 8 ON (ON) 9 OFF (ON) 4 TERMINATION M2 PCB M6 PC Mount, 90 horizontal M6 Snap-In, 90 horizontal M7 PC Mount, 90 vertical M7 Snap-In, 90 vertical VS2 PC Mount, U bracket VS2 Snap-In, U bracket 5 CONTACT Material Terminal Plating Rating G silver gold over silver 3 A@25VAC or 28VDC IP67 K gold 2 tin-lead 4 0.4VA max (AC/DC) IP67 P silver tin-lead 4 A@25VAC or 28VDC IP67 R gold 2 gold 2 0.4VA max (AC/DC) IP67 NOTE: Tin-lead option available with PC type terminations only. Moveable contact & terminals: copper alloy, silver plate 2 Moveable contact & terminals: copper alloy with gold plate over nickel plate 3 Terminals: silver plate with outer layer in gold plating 4 Outer terminals: copper alloy with tin-lead over nickel plate 6 E epoxy seal 3SM-Series Ordering Scheme 3SM - SP 9 - M6 - R Series 2 Poles 3 Circuit 4 Termination 5 Contact E 6 Seal 7 Packaging SERIES 3SM Sealed Surface Mount Pushbutton Switch 2 POLES SP single pole DP double pole 3 CIRCUIT ( ) - momentary 8 ON (ON) 9 OFF (ON) 4 TERMINATION M6 Surface Mount, 90 flat M7 Surface Mount, 90 vertical S6 Surface Mount, 90 horizontal 5 CONTACT Material Terminal Plating Rating G silver gold over silver 3 A@25VAC or 28VDC IP67 K gold 2 tin-lead plated 4 0.4VA max (AC/DC) IP67 P silver tin-lead plated 4 A@25VAC or 28VDC IP67 R gold 2 gold plated 2 0.4VA max (AC/DC) IP67 NOTE: Tin-lead option available with PC type terminations only. Moveable contact & terminals: copper alloy, silver plate 2 Moveable contact & terminals: copper alloy with gold plate over nickel plate 3 Terminals: silver plate with outer layer in gold plating 4 Outer terminals: copper alloy with tin-lead over nickel plate 6 E epoxy seal 7 PACKAGING Switches are bulk packed, unless T/R is specified at the end of the part number. T/R tape reel pieces per reel 3S-Series Optional Cap To order accessories assembled on a switch, specify the switch number followed by the accessory part number and the word assembled. Ex: 3S-SP9-B6-M7-RE-C23ASSEMBLED To order accessories in bulk, specify the Series, followed by the accessory. Ex.) 3S-C3 3S Series - C 3 2 Cap Size 3 Color SERIES OR SWITCH CATALOG NUMBER 3S, 3SS or 3SM 2 CAP SIZE C 0.6mm C2 7.6mm 3 CAP COLOR white 2 black 3 red 4 orange 5 yellow 6 green 7 blue Black, white & red standard. Other colors available. Consult factory. 28

31 3S-Series Sub-Miniature Pushbutton Switches 3S-Series Dimensional Specifications: in. [mm] ACTUATOR OP.095 [2.40].38 [3.50].630 [6.00] PANEL MOUNTING.047 [.9] TO.25 [3.8] PANEL THICKNESS.347 [8.80].776 [9.70].472 [2.00].600 [5.24].005 R [0.3 R] MAX TYP. CAP C.89 [4.80].58 [4.00] C2.287 [7.30].38 [3.50].083 [2.0].97 [5.00].09 [2.30].29 [7.40] BUSHING B5.89 DIA [Ø 4.80].73 [4.40] 0-48 UNS.098 DIA [Ø 2.50] B6.89 DIA [Ø 4.80].73 [4.40].098 DIA [Ø 2.50] B7.89 DIA [Ø 4.80].098 DIA [Ø 2.50].236 [6.00].236 [6.00].236 [6.00] B8.224 [5.70] B9 B0.224 DIA [Ø 5.70].244 DIA [Ø 6.20] /4-40NS.22 DIA [Ø 3.0].97 DIA [Ø 5.00].098 DIA [Ø 2.50].244 DIA [Ø 6.20].22 DIA [Ø 3.0].309 [7.85].309 [7.85] TERMINATION SP8 DOUBLE THROW SP9 SINGLE THROW FLAT.236 DIA [Ø 6.00] [3.80].236 [6.00].20 [5.0] 3.9 [8.0] FLAT.236 DIA [Ø 6.00].46 [3.70].236 [6.00].20 [5.0] 3.9 [8.0].73 [4.40].098 [2.50].30 [3.30].73 [4.40].098 [2.50].8 [3.00].06 [.55] 29

32 3S-Series Sub-Miniature Pushbutton Switches 3S-Series Dimensional Specifications: in. [mm] TERMINATION M.039 [.00].059 [.50].8 [3.00].58 [4.00] M2.039 [.00].30 [3.30].028 [0.70].06 X THK X THK [ ] [ ] VS2.89 [4.80] DOUBLE THROW.098 [2.50].350 [8.90].30 [3.30].236 [6.00].42 [3.60] [0.6].73 [4.40].400 [0.6] [Ø.09] VS2.89 [4.80].098 [2.50].350 [8.90].30 [3.30], SINGLE THROW [3.30] [4.40].236 [6.00] [0.6].400 [0.6] [Ø.09] M6 FLAT.73 [4.40].236 DIA [Ø 6.00].035 [0.90].098 [2.50].236 [6.00].30 [3.30].06, SINGLE THROW.333 [8.45].034 [0.85].20 [5.0].39 [8.0] [Ø.09] FLAT.73 [4.40].236 DIA [Ø 6.00].035 [0.90].098 [2.50].236 [6.00].42 [3.60].06, DOUBLE THROW.333 [8.45].034 [0.85].20 [5.0].39 [8.0] [Ø.09] M7, SINGLE THROW.30 [3.30].236 [6.00].20 [5.0].73 [4.40].236 DIA [Ø 6.00].098 [2.50] [8.0] [Ø.09].73 [4.40].236 DIA [Ø 6.00].42 [3.60].098 [2.50].06, DOUBLE THROW.236 [6.00].39 [8.0].20 [5.0] [Ø.09] 30

33 3S-Series Sub-Miniature Pushbutton Switches 3SS-Series Dimensional Specifications: in. [mm] SNAP-IN TERMINATION M6 M7 VS2 M6,M7,VS2 have the same P.C. mounting but with snap-in bracket. TERMINATION, SINGLE THROW, DOUBLE THROW.77 DIA [Ø 4.50].27 [5.50] DIA [Ø 2.54].77 [4.50].528 [3.40].4 [2.90].39 [8.0].20 [5.0].77 DIA [Ø 4.50].228 [5.80] DIA [Ø 2.54].77 [4.50].528 [3.40].4 [2.90].39 [8.0].20 [5.0], SINGLE THROW.77 DIA [Ø 4.50].27 [5.50].532 [3.50].362 [9.20] DIA [Ø 2.54].77 [4.50].20 [3.05].327 [8.30] M6 DIA [Ø 2.54].77 DIA [Ø 4.50].032 [0.80], SINGLE THROW.27 [5.50] [4.05].034 [0.85].20 [5.0].39 [8.0] [Ø.09] DIA [Ø 2.54].77 DIA [Ø 4.50].032 [0.80], DOUBLE THROW [5.80] [3.40] [4.05].034 [0.85].20 [5.0].39 [8.0] [Ø.09], SINGLE THROW DIA [Ø 2.54].77 DIA [Ø 4.50].27 [5.50].362 [9.20].327 [8.30] [4.00].034 [0.85] [Ø.09] 3

34 3S-Series Sub-Miniature Pushbutton Switches 3SS-Series Dimensional Specifications: in. [mm] TERMINATION M7 DIA [Ø 2.54].77 DIA [Ø 4.50], SINGLE THROW.27 [5.50] [4.37].39 [8.0].20 [5.0] [Ø.09] DIA [Ø 2.54].77 DIA [Ø 4.50], DOUBLE THROW.228 [5.80].39 [8.0].20 [5.0] [4.37] [Ø.09] DIA [Ø 2.54].77 DIA [Ø 4.50], SINGLE THROW.27 [5.50].327 [8.30].362 [9.20] [4.80].20 [5.0] [Ø.09] VS2.77 DIA [Ø 4.50], SINGLE THROW DIA [Ø 2.54].27 [5.50].366 [9.30].77 DIA [Ø 4.50].366 [9.30].366 [9.30].20 [5.0].20 [5.0].20 [5.0].6 [4.0].06.6 [4.0].06.6 [4.0] [5.80].77 DIA [Ø 4.50].27 [5.50].400 [0.6], DOUBLE THROW DIA [Ø 2.54], SINGLE THROW.400 [0.6].400 [0.6] DIA [Ø 2.54] EPOXY SEAL [Ø.09] [Ø.09] [Ø.09].400 [0.6].400 [0.6].400 [0.6] 32

35 3S-Series Sub-Miniature Pushbutton Switches 3SM-Series Dimensional Specifications: in. [mm] TERMINATION M6.77 DIA Ø [8.0].393 [9.98] SINGLE THROW.42 [3.60].226 [5.75].02 [2.60] [7.27].228 [5.80].6 [4.0].6 [4.0].2.80 [7.0].43 [3.63].40 [3.56] [2.03].090 [2.29].040 [.02] [2.03].28 [3.25].357 [9.07].77 DIA Ø [8.0].393 [9.98] DOUBLE THROW.42 [3.60].226 [5.75].02 [2.60] [7.27].228 [5.80].6 [4.0].6 [4.0].2.80 [7.0].43 [3.63].40 [3.56] [2.03].090 [2.29].040 [.02].040 [.02] [2.03].28 [3.25].357 [9.07] M7 SINGLE THROW.02 DIA Ø [3.00].77 DIA Ø [4.0].228 [5.80].02 [2.60].366 [9.30].280 [7.0].27 [5.50].6 [4.0] [5.60].73 [4.39].25 [3.8].8 [3.00].25 [3.8].56 [4.25].326 [8.27].079 [2.00].063 [.60].02 DIA Ø 2.60 DOUBLE THROW.8 [3.00].77 DIA Ø [4.0].228 [5.80].02 [2.60].366 [9.30].280 [7.0].27 [5.50].6 [4.0] [5.60].73 [4.39].25 [3.8].8 [3.00].56 [4.25].25 [3.8].326 [8.27].079 [2.00].063 [.60] S6.77 DIA Ø DIA Ø [8.0].39 [8.0] SINGLE THROW.42 [3.60].42 [3.60].06 DOUBLE THROW.226 [5.75].02 [2.60].02 [2.60] [5.80].6 [4.0].353 [8.97].228 [5.80].6 [4.0].353 [8.97].6 [4.0].6 [4.0].2.80 [7.0].2.80 [7.0].43 [3.63].40 [3.56].226 [5.75] [2.03].43 [3.63].40 [3.56] [2.03].040 [.02].079 [2.00].040 [.02].079 [2.00].28 [3.25].28 [3.25].42 [0.70].032 [0.80].42 [0.70].032 [0.80] 33

36 3S-Series Sub-Miniature Pushbutton Switches 3SM-Series Dimensional Specifications: in. [mm] SNAP-IN TERMINATION M6 M7 VS2 M6,M7,VS2 have the same P.C. mounting but with snap-in bracket. REEL TAPING.33 [8.40].228 [5.80].079 DIA [Ø 2.00].069 [.75].079 [2.00].58 [4.00].059 DIA [Ø.50].04 [0.35].89 [20.80].45 [0.55].098 [2.50] [32.00].8 [28.40].488 [2.40].453 [.50].630 [6.00].248 [6.30] 5.0 FOR M6 ONLY 34

37 3M-Series Miniature Pushbutton Switches 3MN-Series Snap-Acting Miniature Pushbutton Switch 3MS-Series Sealed Snap-Acting Miniature Pushbutton Switch 3MA-Series Alternate Acting Miniature Pushbutton Switch Specifications Contact Rating refer to ordering scheme Electrical Life ,000 make & break full load Contact Resistance MN& 3MA-Series: 0 mω max. 2-4 VDC 00mA for both silver & gold plated contacts. 3MS-Series: 50 mω max. 2-4 VDC 00mA for both silver & gold plated contacts. Insulation Resistance MΩ min. Dielectric Strength Volts sea level Operating Temperature C to +85 C Index of Protection MS -Series: IP68 Cap Installation Support.. 3MS-Series: 0 lbs. max. Solder Heat Resistance... MIL-STD-202, Method 20 Actuator Travel Materials Case MN & 3MA-Series: Dially phthalate (DAP) (UL 94V-0) 3MS-Series: Glass filled nylon 6/6, flame retardant, heat stabilized (UL 94V-0) Plunger MN-Series: Thermoplastic polyester, black 3MS & 3MA-Series: Glass filled nylon or glass filled polyester (UL 94V-0) Bushing MN-Series: Brass, nickel plated 3MA-Series: Zinc, nickel plated Housing MN & 3MA-Series: Stainless Steel Switch Support Retainer..3MS-Series: Stainless Steel Terminal Seal Epoxy 3M-Series Optional Cap To order a cap assembled on a switch, specify the switch number followed by the cap part number and the word assembled. Ex: 3MN-SP-7-P2-B6-M6QE-C3ASSEMBLED To order caps in bulk, specify the Series, followed by the cap. Ex.) 3MN-C3 3MN Series - C 3 2 Cap Size 3 Color SERIES OR SWITCH CATALOG NUMBER 3MN, 3MS or 3MA 2 CAP SIZE C C2 C3 C4 round 7.6mm dia. round 9.35 mm dia. square.7 x.7mm round 5mm dia. C5 C6 round 4.5mm dia. (for 3MA w/ PL bushing) brass chrome plated (for 3MA w/ PD bushing) 3 CAP COLOR white 2 black 3 red 4 orange 5 yellow 6 green 7 blue Black, white & red standard. Other colors available. Consult factory. 35

38 3M-Series Miniature Pushbutton Switches 3MN-Series Ordering Scheme with Square Actuator 3MN - SP AP2 / M6 Q Series with Plunger Actuator 2 Poles 3 Circuit 4 Actuator 5A Actuator Color 5B Frame Color 6 Termination 3MN - SP P2 - B6 - M6 Q Series 2 Poles 3 Circuit 4 Actuator 5 Bushing 6 Termination 7 Contact 7 Contact E 8 Seal E 8 Seal SERIES 3MN Snap-Acting Miniature Pushbutton Switch 2 POLES SP single pole DP double pole 3 CIRCUIT ( ) - momentary 7 ON (ON) 4 ACTUATOR SQUARE ACTUATOR (use with Color Options in Selection 5A & 5B.) AP square with no frame AP2 square raised above frame AP3 square flush with frame PLUNGER ACTUATOR (use with Bushing Options in Selection 5) P0 2.5mm short plunger(for B6 bushing only) P 5.2mm plunger(for bushing B0,B,B20,B2; 7.5mm for B6) P2 2.0mm plunger(for bushing B0,B,B20,B2; 4.2mm for B6) 5A ACTUATOR COLOR & 5B FRAME COLOR,2 white 4 orange 2 black 5 yellow 3 red 6 green 7 blue 8 brown 9 gray Black, white and red are standard. Other colors available, consult factory for details. 2 Selection 5B is blank if actuator style is AP (no frame) 6 TERMINATION M Solder Lug M2 PCB M5- Wire Wrap.750 [9.05] M5-3 Wire Wrap.425 [0.80] M6 PC Mount, 90 horizontal M7 PC Mount, 90 vertical VS2 PC Mount, U bracket,.620 mounting x.460 high VS3 PC Mount, U bracket,.620 mounting x.630 high VS4 PC Mount, U bracket,.750 mounting x.460 high VS5 PC Mount, U bracket,.750 mounting x.630 high VS6 PC Mount, U bracket,.460 high (for B6 bushing only) VS7 PC Mount, U bracket,.630 high (for B6 bushing only) VS8 PC Mount, U bracket,.460 high (for B6 bushing only) VS9 PC Mount, U bracket,.630 high (for B6 bushing only) 7 CONTACT Material Terminal Plating Rating Approvals G silver gold over silver 3 A@20VAC or 28VDC UL, CUL Q silver silver A@20VAC or 28VDC UL, CUL R gold 2 gold 2 0.4VA max (AC/DC) NOTE: Tin-lead option available with PC type terminations only. Moveable contact & terminals: copper alloy, silver plate 2 Moveable contact & terminals: copper alloy with gold plate over nickel plate 3 Terminals: silver plate with outer layer in gold plating 8 E epoxy seal OR 5 BUSHING B6 B0 B B20 B2 Unthreaded (for terminations VS6-VS9 only) Threaded keyway Threaded with flat Unthreaded keyway Unthreaded with flat NOTE: If ordering optional CAP with bushings B0, B, B20 or B2, specify actuator P. For CAP with bushing B6, specify actuator P2. For CAP options, see ordering scheme on page

39 3M-Series Miniature Pushbutton Switches 3MS-Series Ordering Scheme 3MS - WSP 7 - P - B - M6 Q Series 2 Poles 3 Circuit 4 Actuator 5 Bushing 6 Termination 7 Contact E 8 Seal SERIES 3MS Sealed Snap-Acting Miniature Pushbutton Switch 2 POLES WSP single pole 3 CIRCUIT ( ) - momentary 7 ON (ON) 5 BUSHING B B4 Threaded Unthreaded WDP double pole 4 ACTUATOR P.73 plunger (for B bushing);.276 (for B4 bushing) P2.220 plunger (for B bushing);.327 (for B4 bushing) P3.087 plunger (for B bushing);.93 (for B4 bushing) 6 TERMINATION M Solder Lug M2 PCB M6 PC Mount, 90 horizontal M6 Snap-In, 90 horizontal M7 PC Mount, 90 vertical M7 Snap-In, 90 vertical VS2 PC Mount, U bracket,.620 mounting x.460 high VS2Snap-In, U bracket,.620 mounting x.460 high VS3 PC Mount, U bracket,.620 mounting x.630 high VS4 PC Mount, U bracket,.750 mounting x.460 high VS5 PC Mount, U bracket,.750 mounting x.630 high 7 CONTACT Material Terminal Plating Rating Approvals G silver gold over silver 3 A@20VAC or 28VDC UL, CUL IP68 Q silver silver A@20VAC or 28VDC UL, CUL IP68 R gold 2 gold 2 0.4VA max IP68 (AC/DC) NOTE: Tin-lead option available with PC type terminations only. Moveable contact & terminals: copper alloy, silver plate 2 Moveable contact & terminals: copper alloy with gold plate over nickel plate 3 Terminals: silver plate with outer layer in gold plating 7 E epoxy seal 3MA-Series Ordering Scheme with Square Actuator with Plunger Actuator 3MA - SP - - AP2 / M6 Q Series 2 Poles 3 Circuit 4 Actuator 5A Actuator Color 5B Frame Color 6 Termination 3MA - SP - - PD - BD - M6 Q Series 2 Poles 3 Circuit 4 Actuator 5 Bushing 6 Termination 7 Contact 7 Contact E 8 Seal E 8 Seal SERIES 3MA Alternate-Acting Miniature Pushbutton Switch 2 POLES SP single pole DP double pole 3P three pole 4P four pole 3 CIRCUIT ( ) - momentary Switching Position: 2-3, 5-6, 8-9, -2 OPEN 2-, 5-4, 8-7, -0 ON NONE ON 2 ON NONE (ON) 4 ACTUATOR SQUARE ACTUATOR (use with Color Options in Selection 5A & 5B.) AP square with no frame AP2 square raised above frame PLUNGER ACTUATOR (use with Bushing Options in Selection 5) PA.8 dia. x.299 plunger length PI.8 dia. x.244 plunger length PL.8 dia. x.327 plunger length PC.35 dia. brass chrome plated plunger (for BD bushing only) PD.242 dia. brass chrome plated plunger (for BD bushing only) 6 TERMINATION M Solder Lug M2 PCB M5- Wire Wrap.750 [9.05] M5-2 Wire Wrap.964 [24.48] M5-3 Wire Wrap.425 [0.80] M5-4 Wire Wrap.062 [26.87] M6 PC Mount, 90 horizontal M7 PC Mount, 90 vertical VS2 VS3 VS4 VS5 PC Mount, U bracket,.620 mounting x.460 high PC Mount, U bracket,.620 mounting x.630 high PC Mount, U bracket,.750 mounting x.460 high PC Mount, U bracket,.750 mounting x.630 high 7 CONTACT Material Terminal Plating Rating Approvals G silver gold over silver 3 6A@25VAC or 28VDC, UL, CUL 3A@250VAC K gold 2 tin-lead 4 6A@25VAC or 28VDC P silver tin-lead 4 6A@25VAC or 28VDC, UL, CUL 3A@250VAC Q silver silver 6A@25VAC or 28VDC UL, CUL 3A@250VAC R gold 2 gold 2 0.4VA max (AC/DC) NOTE: Tin-lead option available with PC type terminations only. Moveable contact & terminals: copper alloy, silver plate 2 Moveable contact & terminals: copper alloy with gold plate over nickel plate 3 Terminals: silver plate with outer layer in gold plating 4 Outer terminals: copper alloy with tin-lead over nickel plate 5A ACTUATOR COLOR & 5B FRAME COLOR,2 white 4 orange 2 black 5 yellow 3 red 6 green 7 blue 8 brown 9 gray Black, red and white are standard. Other colors available, consult factory for details. 2 Selection 5B is blank if actuator style AP (no frame) OR 5 BUSHING BD Big bushing for PC, PD actuator 5/32 B0 Threaded /4-40 B20 Unthreaded B2 Unthreaded with flat NOTE: For CAP options, see ordering scheme on page E epoxy seal 37

40 3M-Series Miniature Pushbutton Switches 3MN-Series Dimensional Specifications: in. [mm] PLUNGER DIM. "A".8 DIA OPTION CODE DIM. "A" P0.000 [0.00] DIM. "A".8 DIA OPTION CODE DIM. "A" P0.098 [2.50] FOR B0,B,B20,B2 ONLY P.205 [5.20] P2.079 [2.00] FOR B6 ONLY P.295 [7.50] P2.65 [4.20] ACTUATOR AP.726 [8.43].472 [2.00].46 [.70].46 [.70].30 [3.30].047 [.9] TO.25 [3.8] PANEL TICKNESS.287 [7.30] [5.24] PANEL MOUNTING.005 R [0.3 R] MAX TYP..64 [5.60].079 [2.00].079 [2.00] PANEL MOUNTING AP2.768 [9.50].46 [.70].64 [5.60].46 [.70].047 [.9] TO.25 [3.8] PANEL TICKNESS.079 [2.00].268 [6.80].600 [5.24].005 R [0.3 R] MAX TYP. AP3.768 [9.50].46 [.70].46 [.70].047 [.9] TO.25 [3.8] PANEL TICKNESS.268 [6.80] BUSHING B0 STANDARD KEYWAY THREADED SHOWN B20 STANDARD KEYWAY NON-THREADED.039 [.00].250 [6.35].268 [6.80] /4-40NS.039 [.00] B THREADED SHOWN WITH FLAT B2 NON-THREADED WITH FLAT.224 [5.70].250 [6.35].268 [6.80] /4-40NS.039 [.00] B6 NON-THREADED (FOR TERMINATION OPTIONS VS6-VS9 ONLY).77 [4.50].453 [.50] CAP C.299 [7.60].35 DIA [Ø 8.00].295 [7.50] C2.374 [9.50].93 [4.90].382 DIA [Ø 9.70] C3.46 [.70].46 [.70] C4.34 [3.40].97 DIA [Ø 5.00].58 [4.02] 38

41 3M-Series Miniature Pushbutton Switches 3MN-Series Dimensional Specifications: in. [mm] TERMINATION M [2.03].222 [5.65].047 [.20].078 [.98] M2.89 [4.80].256 [6.50] M5 "A" OPTION CODE M5- DIM. "A".750 [9.05] M [0.80] THK THK THK.8 DIA.289 [7.35].205 [5.20] /4-40NS.347 [8.80].222 [5.65] [2.03] 3 2 N.C. N.O. COMM..4 DIA [Ø 2.90].289 [7.35].224 [5.70] /4-40NS.402 [0.20].222 [5.65] [2.03].449 [.40] 3 2 N.O. N.C. COMM. M6.8 DIA. 05 [.30].205 [5.20].270 [6.85] DIA [Ø 2.90].224 [5.70].270 [6.85].449 [.40]. 05 [.30]. 500 M7.8 DIA.205 [5.20].270 [6.85]. 05 [.30] DIA [Ø 2.90].224 [5.70].270 [6.85].449 [.40]. 05 [.30]

42 3M-Series Miniature Pushbutton Switches 3MN-Series Dimensional Specifications: in. [mm] TERMINATION OPTION CODE VS2 VS6 VS3 VS7 DIM. "A".460 [.68].630 [6.00].8 DIA [8.5] "A".25 [3.8].620 [5.75].205 [5.20].270 [6.85] VS2-VS3.25 [3.8].620 [5.75] VS6-VS7 (For B6 Bushing Only).620 [5.75].65 [4.20].77 [4.50] OPTION CODE DIM. "A".4 DIA [Ø 2.90].25 [3.8].224 [5.70].270 [6.85] VS2-VS3 VS6-VS7 (For B6 Bushing Only).65 [4.20] VS2 VS6 VS3 VS7.460 [.68].630 [6.00] [8.5].25 [3.8] "A".620 [5.75].620 [5.75].620 [5.75].20 [5.0].8 DIA.250 [6.35] OPTION DIM. "A" CODE VS4 VS8 VS5 VS9.460 [.68].630 [6.00] [9.20] "A".250 [6.35].750 [9.05].205 [5.20].270 [6.85] VS4-VS5.750 [9.05] VS8-VS9 (For B6 Bushing Only).750 [9.05].65 [4.20].77 [4.50] OPTION CODE VS4 VS8 VS5 VS9 DIM. "A".460 [.68].630 [6.00].4 DIA [Ø 2.90] [9.20].250 [6.35] "A".250 [6.35].750 [9.05].270 [6.85].224 [5.70] VS4-VS5.750 [9.05] VS8-VS9 (For B6 Bushing Only).65 [4.20].20 [5.0].750 [9.05] 40

43 3M-Series Miniature Pushbutton Switches 3MS-Series Dimensional Specifications: in. [mm] PLUNGER DIM. "A".4 DIA [Ø 2.90] OPTION CODE P DIM. "A".73 [4.40] DIM. "A".4 DIA [Ø 2.90] OPTION CODE P DIM. "A".276 [7.00] P2.220 [5.60] P3.087 [2.20] P2.327 [8.30] P3.93 [4.90] FOR B BUSHING FOR B4 BUSHING BUSHING B B4 /4-40NS.350 [8.90].250 [6.35] TERMINATION M.078 [.98].52 [3.85] M2 [2.03] THK.047 [.20] THK.236 DIA [Ø 6.00].276 [7.00].663 [6.85].205 DIA [Ø 5.20].663 [6.85].449 [.40].4 DIA [Ø 2.90].4 DIA [Ø 2.90] M6.236 DIA [Ø 6.00].276 [7.00].4 DIA [Ø 2.90].663 [6.85].205 DIA [Ø 5.20].663 [6.85].4 DIA [Ø 2.90].449 [.40] 4

44 3M-Series Miniature Pushbutton Switches 3MS-Series Dimensional Specifications: in. [mm] TERMINATION M7.236 DIA [Ø 6.00].276 [7.00].4 DIA [Ø 2.90].663 [6.85].205 DIA [Ø 5.20].663 [6.85].449 [.40].4 DIA [Ø 2.90] VS2-VS3 OPTION CODE VS2 VS3.4 DIA [Ø 2.90] DIM. "A".460 [.68].630 [6.00] [3.8].32 [8.5] "A".276 [7.00].230 [5.85] EPOXY SEAL.620 [5.75].620 [5.75].25 [3.8] [3.8].32 [8.5].4 DIA [Ø 2.90] "A".230 [5.85] EPOXY SEAL.620 [5.75].620 [5.75].25 [3.8] VS4-VS5 OPTION CODE VS4 VS5.4 DIA [Ø 2.90] DIM. "A".460 [.68].630 [6.00] "A".230 [5.85].276 [7.00].250 [6.35].750 [9.05].4 DIA [Ø 2.90] "A".230 [5.85].250 [6.35].750 [9.05] [6.35].362 [9.20] EPOXY SEAL.750 [9.05] [6.35].362 [9.20] EPOXY SEAL.750 [9.05] SNAP-IN TERMINATION OPTIONS M6 M7 VS2,VS3 VS4,VS5 M6,M7,VS2,VS3,VS4,VS5 have the same P.C. mounting but with snap-in bracket. 42

45 3M-Series Miniature Pushbutton Switches 3MA-Series Dimensional Specifications: in. [mm] ACTUATOR AP.472 [2.00].73 [4.40].06 PANEL MOUNTING.728 [8.50].465 [.80].465 [.80].047 [.9] TO [3.8] [4.00] PANEL TICKNESS.600 [5.24].005 R [0.3 R] MAX TYP. AP2.64 [5.60] [9.50] [.80].047 [.9] TO [3.8] [3.50] PANEL TICKNESS.465 [.80].4 [2.90].079 [2.00].600 [5.24] PANEL MOUNTING.005 R [0.3 R] MAX TYP. PLUNGER PA,PI.8 DIA "A" OPTION CODE PA PI DIM. "A".299 [7.60].244 [6.20] PL.4 DIA [Ø 2.90].327 [8.30] PC.366 [9.30] Brass Chrome Plated.35 DIA [Ø 8.00].276 [7.00] PD.242 DIA [Ø 6.5] PC, PD Plunger must fit with BD bushing CAP C.299 [7.60].295 [7.50] C2.374 [9.50].93 [4.90] C3.46 [.70].35 DIA [Ø 8.00].382 DIA [Ø 9.70].46 [.70] C4.97 DIA [Ø 5.00].34 [3.40].58 [4.02] C5.394 [0.00].57 DIA [Ø 4.50].59 DIA [Ø 5.00].3 [7.90] C6.35 DIA [Ø 8.00] Brass Chrome Plated.30 [3.30].22 [5.60] For PL Bushing Only For PD Bushing Only BUSHING B0 Threaded B20 Non-Threaded B2 Non-Threaded.224 [5.70] BD.075 [.90].039 [.00] /4-40NS.303 [7.70] /4-40NS.303 [7.70].036 [0.9].553 [4.05] 5/32-32UNS.08 [2.05].08 [2.05] 43

46 3M-Series Miniature Pushbutton Switches 3MA-Series Dimensional Specifications: in. [mm] TERMINATION M [2.03].56 [3.95] M2 M5 "A" OPTION CODE M5- M5-2 M5-3 M5-4 DIM. "A".750 [9.05].964 [24.48].425 [0.80].062 [26.97] THK THK THK.299 [7.60].303 [7.70].455 [.55].224 DIA [Ø 6.20].244 DIA [Ø 6.20].449 [.40] /4-40NS.56 [3.95].8 DIA [2.03].8 DIA [2.03] 3 POLE 4 POLE [7.70] [3.55].299 [7.60].224 DIA [Ø 6.20].652 [6.55].244 DIA [Ø 6.20].850 [2.60] /4-40NS.56 [3.95].8 DIA [2.03].8 DIA [2.03] M6.224 DIA [Ø 6.20].8 DIA. 05 [.30].299 [7.60].303 [7.70].06 [.55] [6.70].224 DIA [Ø 6.20].8 DIA [7.60].303 [7.70].06 [.55] [.40] 44

47 3M-Series Miniature Pushbutton Switches 3MA-Series Dimensional Specifications: in. [mm] TERMINATION M7.8 DIA.05 [.30].244 DIA [Ø 6.20].299 [7.60].06 [.55].303 [7.70] DIA [Ø 6.20].8 DIA. 05 [.30].299 [7.60].06 [.55].303 [7.70] [.40].244 DIA [Ø 6.20].8 DIA. 05 [.30].299 [7.60].303 [7.70]. 565 [4.35] THREE POLE.652 [6.55].565 [4.35].244 DIA [Ø 6.20].8 DIA.299 [7.60].303 [7.70] FOUR POLE.850 [2.60].565 [4.35]. 05 [.30]. 565 [4.35] VS2-VS3.299 [7.60].8 DIA SINGLE POLE PC MOUNTING.8 DIA DOUBLE POLE PC MOUNTING OPTION CODE VS2 VS3 DIM. "A".460 [.68].630 [6.00].303 [7.70].620 [5.75] [8.5].25 [3.8] "A".25 [3.8].620 [5.75] [8.5].25 [3.8] "A".25 [3.8].620 [5.75] VS4-VS5 OPTION CODE DIM. "A".303 [7.70].299 [7.60].8 DIA SINGLE POLE PC MOUNTING.250 [6.35].8 DIA DOUBLE POLE PC MOUNTING.250 [6.35] VS4 VS5.460 [.68].630 [6.00].750 [9.05] [9.20].250 [6.35] "A".750 [9.05] [9.20].250 [6.35] "A".750 [9.05] 45

48 4S & 4M-Series Sub-Miniature & Miniature Slide Switches 4S-Series Sub-Miniature Slide Switches 4M-Series Miniature Slide Switch Specifications Contact Rating refer to ordering scheme Electrical Life ,000 make & break cycles at full load Contact Resistance mω max. 2-4 VDC 00mA for both silver & gold plated contacts. Insulation Resistance MΩ min. Dielectric Strength Volts sea level Operating Temperature C to +85 C Solder Heat Resistance... MIL-STD-202, Method 20 Actuator Travel Materials Case Dially phthalate (DAP) (UL 94V-0) Slide Handle Nylon Housing Stainless Steel Terminal Seal Epoxy 4S-Series Ordering Scheme 4S - FSP - M6 Q Series 2 Poles 3 Circuit 4 Termination 5 Contact E 6 Seal 7 Packaging SERIES 4S Sub-Miniature Slide Switch 2 POLES FSP single pole 3 CIRCUIT Switching Position: 2- OPEN 2-3 ON NONE ON 2 ON NONE (ON) 3 ON OFF ON 4 TERMINATION M2 PCB M6 PC Mount, 90 horizontal 5 CONTACT Material Terminal Plating Rating G silver gold over silver 3 3A@25VAC or 250VAC K gold 2 tin-lead 4 0.4VA max (AC/DC) P silver tin-lead 4 3A@25VAC or 250VAC Q silver silver 3A@25VAC or 250VAC R gold 2 gold 2 0.4VA max (AC/DC) NOTE: Tin-lead option available with PC type terminations only. Moveable contact & terminals: copper alloy, silver plate 2 Moveable contact & terminals: copper alloy with gold plate over nickel plate 3 Terminals: silver plate with outer layer in gold plating 6 E epoxy seal 7 PACKAGING Switches are bulk packed, unless T/R is specified at the end of the part number. T/R tape reel pieces per reel 46

49 4S & 4M-Series Sub-Miniature & Miniature Slide Switches 4M-Series Ordering Scheme 4M - SSP 3 - S / 2 - M6 Q Series 2 Poles 3 Circuit 4 Actuator 5 Actuator Color 6 Termination 7 Contact E 8 Seal SERIES 4M Miniature Slide Switch 2 POLES SSP single pole SDP double pole 6 TERMINATION M Solder Lug M2 PCB M3 Quick Connect M5- Wire Wrap.750 [9.05] M5-2 Wire Wrap [24.48] M5-3 Wire Wrap [0.80] M5-4 Wire Wrap [26.97] M6 PC Mount, 90 horizontal M7 PC Mount, 90 vertical VS2 PC Mount, U bracket,.620 mounting x.460 high 3 CIRCUIT Switching Position 2-, 5-4 OPEN 2-3, 5-6 ON NONE ON 3 ON OFF ON 4 ACTUATOR S.20 [5.0] high S2.285 [7.25] high S3.370 [9.40] high S4.40 [3.55] high S5.053 [.35] high (for DPDT only) S6.482 [2.25] high S7.3 [7.90] high T.20 [5.0] high (for DPDT only) 5 ACTUATOR COLOR white 2 black 3 red 4 orange 5 yellow 6 green 7 blue 8 brown 9 gray White, black & red are standard. Other colors available for quantities of 5K or more. 7 CONTACT Material Terminal Plating Rating Approvals G silver gold over silver 3 5A@25VAC or 28VDC; UL, CSA 250VAC K gold 2 tin-lead 4 0.4VA max (AC/DC) P silver tin-lead 4 5A@25VAC or 28VDC; UL, CSA 250VAC Q silver silver 5A@25VAC or 28VDC; UL, CSA 250VAC R gold 2 gold 2 0.4VA max (AC/DC) NOTE: Tin-lead option available with PC type terminations only. Moveable contact & terminals: copper alloy, silver plate 2 Moveable contact & terminals: copper alloy with gold plate over nickel plate 3 Terminals: silver plate with outer layer in gold plating 4 Outer terminals: copper alloy with tin-lead over nickel plate 8 E epoxy seal 4S-Series Dimensional Specifications: in. [mm] 4S-Series TERMINATION M2.402 [0.20].97 [5.00].22 [5.60].8 [3.00].400 [0.5].39 [8.0].20 [5.0] [Ø.09].02 [2.60].098 [2.50].30 [3.30] M6.402 [0.20].22 [5.60].098 [2.50].4 [2.90].20 [5.0].39 [8.0] [Ø.09].97 [5.00].00 [0.25].02 [2.60].20 [5.0].034 [0.85] T 47

50 4M-Series Miniature Slide Switches title 4M-Series Dimensional Specifications: in. [mm] ACTUATOR S S2 S3 S4.20 [5.0] [3.80].285 [7.25] [3.80].370 [9.40] [3.80].40 [3.55] [3.80] S5 (For DPDT Only).053 [.35].482 [3.80] [2.25] S6 [3.80].3 [7.90] S7 [3.80] T (For DPDT Only) [3.80] [5.30].327 [8.30] TERMINATION [2.02] M STANDARD.59 [4.05] M2 M3 QUICK CONNECT M5 OPTION CODE M5- DIM. "A".750 [9.05] [2.03].047 [.20].265 [6.74].062 [.57].265 [6.74].047 [.20] "A" M5-2 M5-3 M [24.48].425 [0.80].062 [26.97] THK THK THK THK.240 [6.0].772 [9.60].09 [2.30] TRAVEL.20 [5.0] [3.80].693 [7.60].248 [6.30].236 [6.00].240 [6.0].772 [9.60].09 [2.30] TRAVEL.689 [7.50].27 [5.50] [3.80].366 [9.30].42 [0.70].59 [4.05] [2.03].56 [3.95] [2.03] M6.02 [0.30].520 [3.2] [3.80].89 [4.80].375 [9.53].236 [6.00].5.20 [3.2].375 [9.53] [3.80].42 [0.70].02 [0.30].520 [3.2].205 [5.20] [3.2] 50

51 4M-Series Miniature Slide Switches title 4M-Series Dimensional Specifications: in. [mm] TERMINATION M7.75 [4.45] [3.80].02 [0.30].89 [4.80]. 400 [0.6].75 [4.45].400 [0.6] [3.80].205 [5.20].02 [0.30].75 [4.45] [0.70].75 [4.45] VS2 [3.80].8 [4.60].3.50 [8.90].89 [4.80].620 [5.75].25 [3.8].047 [.20].307 [7.80].25 [3.8].02 [0.30].620 [5.75] [3.80].3.82 [9.70].205 [5.20].620 [5.75].25 [3.8].3 [7.90].25 [3.8].02 [0.30].620 [5.75] 5

52 4PM-Series Sub-Miniature Slide Switches for PC Board 4PM-Series Ordering Scheme Series 4PM-Series Sub-Miniature Slide Switches for PC Board 3 Actuator Specifications 4PM S2 - M4 Q 2 Poles Contact Rating refer to ordering scheme Electrical Life ,000 make & break full load Contact Resistance mω max. Insulation Resistance MΩ min.@500 VDC Mechanical Life ,000 cycles Operating Temperature C to +85 C Solder Heat Resistance... MIL-STD-202, Method 20 Actuator Travel Materials Case & Slide Handle..... PBT, Glass filled Housing POM Terminal Seal Epoxy 4 Termination 5 Contact E 6 Seal SERIES 4PM Sub-Miniature Slide Switch 2 POLES Switching Position: 2-, 5-4 OPEN 2-3, single pole ON NONE ON 602 double pole ON NONE ON 3 ACTUATOR S flush slider S2 high slider S3 side slider 4PM-Series Dimensional Specifications: in. [mm] 4 TERMINATION M narrow pitch single pole M2 narrow pitch double pole 5 CONTACT Material Terminal Plating Rating Q R silver gold 2 silver gold 2 2A@250VAC 0.A@30VDC Moveable contact & terminals: copper alloy, silver plated 2 Moveable contact & terminals: copper alloy with gold plate over nickel plate 6 E epoxy seal M3 wide pitch single pole M4 wide pitch double pole ACTUATOR S Flush Slider.299 [7.60].55 [4.00].303 [7.70].35 [8.00].504 [2.80] S2 High Slider.4 [2.90].299 [7.60].8 [3.00].55 [4.00] (SLIDE DISTANCE).36 [3.45].303 [7.70].4 [2.90].504 [2.80].02 [2.60].025 [0.64].9 [4.85].025 [0.64].025 [0.64].9 [4.85].35 [8.00].025 [0.64] S3 Side Slider.06 [2.70].055 [.40].307 [7.80].025 [0.64].4 [2.90].55 [4.00].303 [7.70].9 [4.85].35 [8.00].047 [.20].504 [2.80].099 [2.50].025 [0.64] TERMINATION M.035 DIA [Ø 0.90] M2.035 DIA [Ø 0.90] M3.035 DIA [Ø 0.90] M4.035 DIA [Ø 0.90] 52