T80-T Miniature Toggle Switches Compliant
|
|
|
- Alexandra Fields
- 6 years ago
- Views:
Transcription
1 T80-T Miniature Toggle Switches Compliant TCT DIP PUSH BUTT SLIDE SPECIFICTIS CTCT VC or 8 VDC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full load CTCT RESISTNCE: 0 m max. VDC,00 m INSULTI RESISTNCE:,000 M min. DIELECTRIC STRENGTH:,00 V sea level. OPERTING TEMPERTURE: -0 C to +8 C -07 E M K F N G G H H H J J L MTERILS CSE - diallyl phthalate ( DP ) TOGGLE HNDLE - Copper alloy, chrome plated BUSHING - Copper alloy, nickel plated HOUSING - Stainless Steel CTCT ND TERMINL - copper alloy, silver plated How do you build the switches you need!! The straight type, please see the () ; The right angle P.C terminals, please see the (B) () T 8 0 S E C Q E S 0 T T80 T80 T80 T80 T80B T80 T80 T80 T80 T80B T80 T80 T80 T807 T80 T80 T80 T80 T807 T80 T8 T8 T8B T8 T87 T8 Switch Function SP on--on SP on--(on) SP on-off-on SP (on)-off-(on) SP on-off-(on) DP on--on DP on--(on) DP on-off-on DP (on)-off-(on) DP on-off-(on) P on--on P on--(on) P on-off-on P (on)-off-(on) P on-off-(on) P on--on P on--(on) P on-off-on P (on)-off-(on) P on-off-(on) way position switches SPT on-on-on SPT (on)-on-(on) SPT on-on-(on) DPT on-on-on DPT (on)-on-(on) DPT on-on-(on) S T X W V Y U U U Z Z Z Z LK LK ctuator Flatted toggle Large/ bushing.8 7. antirotation (7.) antirotation (.8) Locking Lever Round top Flat top E M K F N G G H H H J J L Bushing the actuator: Z/Z/Z/Z/LK/LK No requirement to choose the bushing unless the splash proof (L) ZL/ZL/LKL/LKL and the non-thd (N) LKN/LKN Termination B solder lug C P.C.7width D Quick connect D wire wrap(.0) D wire wrap(0.8) Contact Material Q silver plated R gold plated G gold over silver K tin plated Epoxy seal () seal E epoxy seal (B) T 8 0 L T N Q E S T Horizon Right ngle T80 T80 T800 T800 T800B T80 T80 T80 T80 T80B T80P() T80P() T80P() T807P() T80P() T8 T8 T8B Vertical Right ngle T80L T80L T800L T800L T800LB T80L T80L T80L T80L T80LB T80P T80P T80P T807P T80P T80P T80P T80P T807P T80P way position switches T8L T8L T8LB T8P T87P T8P Switches Function SP on--on SP on--(on) SP on-off-on SP (on)-off-(on) SP on-off-(on) DP on--on DP on--(on) DP on-off-on DP (on)-off-(on) DP on-off-(on) P on--on P on--(on) P on-off-on P (on)-off-(on) P on-off-(on) P on--on P on--(on) P on-off-on P (on)-off-(on) P on-off-(on) SPT on-on-on SPT (on)-on-(on) SPT on-on-(on) DPT on-on-on DPT (on)-on-(on) DPT on-on-(on) S T X W V U U U LK LK (STD) (metric) (metric) (long) (splash-proof) ctuator Flatted toggle Locking Lever Round top(thd) Flat top(thd) Bushing (STD) (metric) (metric) (long) (splash-proof) the actuator: LK/LK No requirement to choose the bushing unless the splash proof (L) LKL/LKL and the non-thd (N) LKN/LKN Vertical support Bracket () S0.8 S.00 S.8 S0.00 V0 snap-in.8 V snap-in.00 V snap-in.8 V0 snap-in.00 ctuator Cap/ Rubber hood Sealing () Rubber hood E for E Bushing E for Z/Z Bushing E for Z/Z Bushing E for E Bushing K for K bushing ctuator Cap T 0.8 (for actuator S) T 7. ( for actuator T) Contact Material Q R G K E E silver plated gold plated gold over silver tin plated Epoxy seal () seal E epoxy seal Support Bracket type () std. S snap-in type Cap color 0 transparent white black red yellow blue green 7 orange RoHS code H = RoHS Compliant ctuator Cap () T -0.8 ( actuator S) T - 7. ( actuator T) Cap color 0 transparent white black red yellow blue green 7 orange RoHS code H = RoHS Compliant
2 T80-T Miniature Toggle Switches (Straight Type) Compliant PDT PDT Comm Comm Comm Comm T80 T80 T80 T80 T80B Comm 8Comm 7 () () () () - - T80 T80 T80 T80 T80B () () () () -,- -,- way switches (SPT) T8 T8 T8B -,- -,- -,- () () () T80 T80 T80 T807 T80 () -,- 8- T80 T80 T80 () () () -,- 8-7 T807 () () T80 () Term. -,- -,- Comm. 8-,- 8-7,-0 way switches (DPT) T8 T87 T8 Term. Comm. () () () () -,- -,- -,- 8-,- 8-,-0 8-7,-0 KEYWY KEYWY KEYWY /-0UNS /-0UNS. DI. ø DI. ø T80 - SEBQ T80 - SEBQ Please see page to know more about T8 ( -way Switches).80. KEYWY /-0UNS /-0UNS. DI.ø.0 0. T80- SEBQ. DI. ø KEYWY KEYWY 0 KEYWY KEYWY.0.8 TCT DIP PUSH BUTT SLIDE Comm Comm 8 Comm Comm 7 0 T80 - SEBQ Please see page to know more about T8 ( -way Switches) -08
3 FETURE T80-T Miniature Toggle Switches (Right ngle Type) Compliant The T80-T series P.C.B Mounted Toggle Swtiches - Right ngle Type - are specially designed for P.C. Boards. Easy to mount and install securely with a vertical support rack. The toggle operates in the same direction as the print connectors. Customers' specifications of pitch are acceptable. HORIS RIGHT NGLE TCT DIP PUSH BUTT SLIDE PDT Comm Comm Comm Comm FOR T80-T800B T80 T80 T800 T800 T800B T80P() T80P() T80P() T807P() () T80P() T80 T80 T80 T80 T80B () () () () -,- -,- way switches (SPT) T8 T8 T8B Comm 8Comm 7 () () () () - - () -,- -,- -,- -,- 8- () () () () () -, TYP DI.7ø P.C.B MOUNTING DIMENSIS FOR T80-T80B DI.ø T80 - TNQ T80 - TNQ Please see page to know more about T8 ( -way Switches).0 DI.7 ø T80P()- TNQ SWITCH SUPPORT.0.8 SWITCH SUPPORT.0 TYP EPOXY SEL.00 TYP.7 FOR T80P()-T80P().8.8 KEYWY KEYWY.00.8 TYP 7 8 KEYWY.08 TYP DI.8 ø.07 DI.8 ø.07 DI.8ø -0
4 T80-T Miniature Toggle Switches (Right ngle Type) VERTICL RIGHT NGLE Compliant PDT PDT Comm Comm Comm Comm T80L T80L T800L T800L T800LB P.C.B MOUNTING DIMENSIS () () () () - - T80L T80L T80L T80L T80LB () () () () -,- -,- way switches (SPT) T8L T8L T8LB () () () -,- -,- -,- T80P T80P T80P T807P T80P () -,- 8- T80P T80P T80P FOR T80L-T800LB.00 Comm Comm 8Comm 7 () () () -,- 8-7 ().00.7 T807P () () T80P () Term. -,- -,- Comm. 8-,- 8-7,-0 way switches (DPT) T8P.0 T87P () ().8 T8P () Term. -,- -,- -,- Comm. 8-,- 8-,-0 8-7,-0 Comm 8 Comm Comm DI ø FOR T80L-T80LB DI ø DI.7ø snap-in type DI.7 ø snap-in type DI. ø T80L - TNQ/ T80L-TNQ-S T80L - TNQ/ T80L-TNQ-S Please see page to know more about T8L ( -way Switches) snap-in type.0 DI.7ø snap-in type.00.0 DI.7ø DI. ø.. EPOXY SEL..7 SWITCH SUPPORT T80P- TNQ/ T80P-TNQ-S T80P- TNQ/ T80P-TNQ-S Please see page to know more about T8P ( -way Switches) FOR T80P-T80P...07 DI ø.8. DI. ø. DI.ø EPOXY SEL KEYWY KEYWY FOR T80P-T80P DI ø.8 KEYWY.00 SECTI SECTI TCT DIP PUSH BUTT SLIDE
5 T80-T Miniature Toggle Switches Compliant ctuator Option S (STD) T(STD) X LG W LG V LG Y PLSTIC TCT DIP PUSH BUTT SLIDE. DI.ø DI.7ø Flatted ctuator ( LY PPLY "H""H"H" BUSHING) U (standard) U ( short ).00. U ( long ) Toggle Cap Option DI.0ø DI.0ø.0..0 DI.0ø the height of actuator is with bushing "E". It will be difference with other bushing option.0. Z LRGE TOGGLE Z NTIROTTI /-UNS KEYWY.0 DI.0ø DI ø Z LRGE TOGGLE Z NTIROTTI /-UNS KEYWY DI.8ø Bushing Option Code not required unless " L " splashproof bushing ordered..0 DI.0ø. DI.0ø /-0UNS.00. LK (round top) KEYWY. DI.8ø Locking Lever /-0UNS Y HNDLE COLOR NO. LK(flat top) Toggle Cap Color Option COLOR White Black(std.) Red Now the available color is "". If you need the others, please inquire first. KEYWY Bushing Option Code not required unless () " L " splashproof bushing ordered --LKL / LKL () non-thread ordered,choose the bushing code "N" -- LKN / LKN. 0.8 Material Vinyl T for actuator "S"only.8 7. Material Vinyl T for actuator "T" code color 0 transparent white black red yellow blue green 7 orange -
6 T80-T Miniature Toggle Switches Compliant Bushing Option E THD STD. TYPE M N-THD F THD. N N-THD HIGH TORQUE G:THD STD.TYPE G:N-THD HIGH TORQUE H:THD STD.TYPE H:N-THD H:METRIC DI 7.8ø DI 7.8ø /-0UNS LG J:THD STD.TYPE J:N-THD /-UNS KEYWY DI 7.8ø /-0UNS /-0UNS MP*0.7 THD Mfg. Option Relief or Imperfect. Thd Splash water proof Solution L SPLSH-PROOF SELS ø K METRIC K=METRIC E=INCH DI.8ø /-0UNS /-0UNS E for the large toggle (/-UNS) Mfg. Option Relief or Imperfect. Thd RUBBER HOOD SELING /-0UNS Mfg. Option Relief or Imperfect. Thd E O RING For the Large toggle ( Z / Z option), the internal actuator seal standard. External bushingseal washer available from:multi-flex Seals Inc.,Hackensack,NJ. Part no:mfs ø.0..0 DI.8ø Panel Mounting / IN. BUSHING DI.ø.0 DI.8ø.0 DI.0ø / IN. BUSHING DI.ø without lock ring.0.0 METRIC BUSHING. DI.0ø. DI.ø R.00.. with lock ring DI.ø E for the large toggle (/-UNS) R DI.0ø. DI.ø TCT DIP PUSH BUTT SLIDE
7 T80-T Miniature Toggle Switches Compliant TERMINL OPTI (LY FOR THE STRIGHT TYPE T80~T80) B SOLDER LUG C PRINTED CIRCUIT D QUICK CNECT WIREWRP.07. MX CODE D D ""dimension.70 (.0). (0.8) TERMINL SEL OPTI E TERMINL SEL EPOXY SEL TCT DIP PUSH BUTT SLIDE THK 0.7 (.00) THK 0.7 (.00) CTCT MTERIL OPTIS CODE CTCT MTERIL TERMINL MTERIL RTING Q R G K Silver plated Gold plated over nickel plated Gold plated over silver plated Gold plated over nickel plated Silver plated Gold plated over nickel plated Gold plated over silver plated Tin over nickel V C or 8 V 0 VC 0.V 0 V C or DC MX 0. V 0 V C or DC MX V C or 8 0 VC 0.V 0 V C or DC MX The K option is only for some special item. Please inquire first when you need the "K" option S0 / S/ V0/V S/S0 /V/V0 THK 0.7 (.00).00.7 THK 0.7 (.00) VERTICL SUPPORT BRCKET OPTI ( only apply the straight type terminal -page -08. Please build the terminal option "c" code) option Code dimension S0/V0.0.8 S/V.0.00 V0/V : the snap-in type EPOXY SEL T80 - TNCQ-S0(S) T80 - TNCQ-S0(S) P.C. MOUNTING P.C. MOUNTING P.C. MOUNTING.07 DI.8ø DI.8ø SNP-IN V0/ V SNP-IN V0/ V DI.8ø - EPOXY SEL T80 - TNCQ-S(S0) SNP-IN V/ V0
8 T80-T Miniature Toggle Switches Compliant.70.8 P.C. MOUNTING NUT STD..0.0 option Code S/V. STD.8 DI ø.8 OUT OUT dimension S0/V0.00 V/V0 : the snap-in type KEYWY /-0UNS SINGLE POLE, POSITI IN.7 DI.ø OUT.8.00 DRESS NUT EPOXY SEL The hardware of T80-T TOGGLE SWITCHES. 8. /-0UNS.8 DI ø METRIC NUT.0. LOCKING RING. MP 0.7 THD STD. FOR Z Z ø8..78 DI STD. FOR Z Z /-UNS The information of -way toggle switches (OUT) T80 - TNCQ-S(S0) POS. POS. POS. B OUT B OUT.8 DOUBLE POLE, POSITI 0 B IN OUT KEYWY.0.8 IN OUT.07 DI.8ø DRESS NUT FOR Z ZI /- UNS R.00 X.0.00 LOCK WSHER STD THK DI ø0. 0 (OUT) KNURLED NUT /-UNS SNP-IN V/ V0 8 7 (OUT) STD. FOR Z Z.0 0. THK.8 DI.ø.7.. DI ø.0 TCT DIP PUSH BUTT SLIDE B OUT OUT (OUT) (OUT) (OUT) (OUT) (OUT) (OUT) SPT DPT -
Miniature Toggle Switches. Bushing. Termination B solder lug C P.C 1.27width D Quick connect D1 wire wrap(19.05) D3 wire wrap(10.
E L SPECIFICTIS CTCT RTING: @ VC or 8 VC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full load CTCT RESISTNCE: 0 m max. initial @- VC,00 m INSULTI RESISTNCE:,000 M min. IELECTRIC STRENGTH:,00
Miniature Toggle Switches
T80-T Miniature Toggle Switches Compliant D E L F R E E TCT DIP PUSH BUTT SLIDE ROCKER TOGGLE INDEX SPECIFICTIS CTCT RTING: @ VC or 8 VDC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full
T80-R Miniature Rocker and Paddle Switches Compliant
T80-R Miniature Rocker and Paddle Switches Compliant TCT DIP PUSH BUTT SLIDE ECIFICTIS MTERILS CTCT RTING: @ VC or 8 VDC ( Q terminal) CSE - diallyl phthalate ( ) ELECTRICL LIFE: 0,000 make-and-break cycles
C&K 7000 Series Miniature Toggle Switches
Miniature Switches Models vailable Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical
S E C Q - E - S T 1-2. Cap/ Sealing Hood (STD) 8.89 B solder lug Q (none) (none) Rubber Hood
T 8 0 1 3 - S E C Q - E - S 2 0 - T 1-2 Switch Function (SPDT) Actuator Bushing Termination Contact Switching Position Model No. S 10.41 E Epoxy Seal Vertical Support Bracket Cap/ Sealing Hood (STD) 8.89
7000 Series Miniature Toggle Switches
Models vailable Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical pplications Telecommunications
.410 (10.41) 1/4-40 UNS-2A Ø.115 (Ø 2.92) .410 (10.41) Ø.115 (Ø 2.92) Ø.115 (Ø 2.92)
Series A: Miniature Switches Series A Miniature Switches FEATURES Save Space and Weight,, PDT, and DPT Circuitry Choice of Actuators, Bushings and Terminations UL Recognized Models In inches (and millimeters)
SPECIFICATIONS: MATERIALS: If your preferred product configuration is not shown, please contact our sales representative for custom design.
SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 50,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. initial @2-4VDC 00mA for both silver
.570 (14.48).415 (10.54) Ø.115 (Ø 2.92) .410 (10.41) Ø.115 (Ø 2.92) Ø.115 (Ø 2.92)
Series A: Miniature Toggle Switches SERIES A Miniature Toggle Switches FEATURES Save Space and Weight,, PDT, and DPT Circuitry Choice of Actuators, Bushings and Terminations UL Recognized Toggle Switches
SERIES 34A Miniature Toggle Switches
DIP Switches Toggle Switches Series A: Miniature Toggle Switches SERIES A Miniature Toggle Switches FEATURES Save Space and Weight,, PDT, and DPT Circuitry Choice of Actuators, Bushings and Terminations
C&K E Series Sealed Miniature Toggle Switches
Models vailable Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical pplications Telecommunications
T Series Subminiature Toggle Switches
Models vailable Features/Benefits Compact size small footprint Single and double pole models PC and panel mount options available Typical pplications Hand-held telecommunications Instrumentation Medical
CIT SWITCHTM ANT SPECIFICATIONS
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
SERIES 100 SWITCHES TOGGLE SWITCHES - MINIATURE. Phone: Fax: SPECIFICATIONS MATERIALS
TACT SERIES 100 - MINIATURE SPECIFICATIONS Contact Rating: Life Expectancy: Contact Resistance: Insulation Resistance: Dielectric Strength: See contact material options 40,000 make-and-break cycles at
8060 Series Alternate Action and Momentary Pushbutton Switches
Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available Typical pplications Instrumentation Computers
8060 Series Alternate Action and Momentary Pushbutton Switches
lternate ction and Momentary Switches Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available
8020 Series Snap-acting Momentary Pushbutton Switches
Snap-acting Momentary Switches Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS compliant
ANT. Materials. Features. Miniature Toggle
Specificationscations RoHS Compliant ANT Electrical Ratings Electrical Life Contact Resistance 5A @ 0VAC, 8VDC A @ 50VAC See Contact Options 50,000 cycles typical
C&K 8060 Series Alternate Action and Momentary Pushbutton Switches
lternate ction and Momentary Switches Specifications CONTCT RTING: Q contact material: 6 MPS @ 120 V C or 28 V DC; 3 MPS @ 250 V C. See page -53 for additional ratings. ELECTRICL LIFE: 50,000 make-and-break
TP Series Tiny Pushbutton Switches
Tiny Switches Features/Benefits Subminiature size capable of switching 1 MP Vertical & right angle terminations PC & panel mount models Snap-in front panel mounting available Epoxy terminal seal-compatible
C&K ET Series Sealed Subminiature Toggle Switches
Models vailable Features/Benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact sizeand small footprint save PCB space Typical
C&K 8020 Series Snap-acting Momentary Pushbutton Switches
Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS complient models available Typical pplications
8500 Series Subminiature Pushbutton Switches
8500 Series Features/Benefits Pre-travel or over-travel models available Ratings up to 3 MPS Reliable contact design RoHS compliant Typical pplications Detection Telecommunications and networking equipment
2M Series Sub-Miniature Toggle Switches
M Series Sub-Miniature Toggle Switches SPECIFICATIS CTACT RATING: Dependent upon contact material See Page 8. MECHANICAL LIFE: 0,000 make-and-break cycles. CTACT RESISTANCE: 0 m max. initial @ -VDC 00mA
7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
SPDT DPDT 3PDT 4PDT SWITCHES TACT POS 1 POS 2 POS 3. Model No.
SCHEMATIC 3 2 1 Model No. SP-1 ON NONE ON SP-2 ON NONE (ON) SP-3 ON OFF ON SP-4 (ON) OFF (ON) SP-5 ON OFF (ON) Term. Comm. 2-3 OPEN 2-1 ( ) = Momentary 6 5 4 3 2 1 Model No. DP-1 ON NONE ON DP-2 ON NONE
EP Series Sealed Tiny Pushbutton Switches
Sealed Tiny Switches Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant
onlinecomponents.com
eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available Typical Applications
ANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
EP Series Sealed Tiny Pushbutton Switches
Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant models available
Series 300. Miniature Rocker & Paddle Switches
Series 00 SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 0,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. inital @ -VDC. 00mA for both
Snap Action Miniature Pushbutton Switches
Snap Action Miniature Switches SERIES 38C Miniature Switches FEATURES and Circuitry Choice of Bushings, and Terminations Caps and Frames Available UL Recoginized DIMENSIONS IN INCHES (AND MILLIMETERS)
C&K 7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical Applications Telecommunications
EP Series Sealed Tiny Pushbutton Switches
Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant models available
Distinctive Characteristics
Distinctive Characteristics ntirotation design, standard on noncylindrical levers, mates toggle and bushing; bottom of toggles has two flatted sides which fit into a complementary opening inside bushing.
SPECIFICATIONS MATERIALS. NONE = Black WHT= White RED = Red M1 M3 M5. YEL = Yellow. GRY = Gray PUR = Purple. **Contact E-Switch for additional colors
SERIES 300 AND PADDLE - MINIATURE FEATURES & BENEFITS Multiple rocker & paddle options Up to 4 poles Multiple termination options Snap-in panel mount option available HOW TO ORDER APPLICATIONS/MARKETS
1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
C&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
S and SF series Washable miniature toggle switches
S and SF series Washable miniature toggle switches Distinctive features and specifications Sealed Secure assembly of the two case parts Internally sealed bushing Epoxy sealed terminals Process compatible
Toggles Product Selection Guide
s Product Selection Guide s Series 7000 Military E ET T GT 9000 Switch Type Miniature Miniature Miniature Subminiature Subminiature Ultraminiature Power Poles/Throws,, 3PDT, 4PDT,,,, 3PDT SPST,, SPST,,
T Series Subminiature Toggle Switches
eatures/benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation
Pushbutton Product Selection Guide
Product Selection Guide Series Switch Type ELUM Mom./ Latching EP Tiny TP Tiny E00 800 Subminiature Snapacting Mom. acting Snap- Mom. E00 Miniature 8060 lternate ction 8500 Subminiature KM Poles/Throws
C&K 8020 Series Snap-acting Momentary Pushbutton Switches
Snap-acting Momentary Switches Models Available Features/enefits Positive tactile feel Multi-positions available Wide variety of termination options Typical Applications Instrumentation Computer peripherals
General Specifications
eneral Specifications Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Electrical apacity (Resistive Load) Power Level
Series 47B: Sealed Miniature Rocker and Paddle Switches
Series 7B: Sealed Miniature and Paddle Switches SERIES 7B Sealed Miniature and Paddle Switches FEATURES Save Space and Weight, and PDT Circuitry Choice of Actuators and Terminations Sealed per IP-7 DIP
General Specifications
Series M eneral Specifications Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical apacity (Resistive Load)
E Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available
7000 Series Miniature Rocker & Lever Handle Switches
Miniature & Lever Handle Switches Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant
C&K T Series Subminiature Toggle Switches
Features/Benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation
9000 Series Power Rocker and Lever Handle Switches
Power and Lever Handle Switches Features/Benefits Thermoset UL 94V-0 housing Rugged construction Variety of actuator and termination options RoHS compliant Typical Applications Small equipment Shut-off
7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant Typical Applications Telecommunications
Rockers Product Selection Guide
s Product Selection Guide Series 7000 E ET T 9000 DA D Switch Type Subminiature Subminiature & Lever andle Poles/Throws,, 3PDT, 4PDT,, 3PDT,, DPST, Max. Current 5 Amps 7.5 Amps 3 Amps 3 Amps 4 Amps Washable
TYPICAL SWITCH ORDERING EXAMPLE TERMINALS
Series M TYPIL SWITH ORDERIN EXMPLE M0 S 0 POLES SMLL TOLES SMLL BUSHINS ONTT MTERILS & RTINS OPTIONL PS P OLORS SPDT DPDT SPT PDT * PDT DPT * -pole available on vertical models only. IRUITS ON NONE ON
C&K E Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical Applications Telecommunications
8500 Series Subminiature Pushbutton Switches
Subminiature Switches Features/Benefits Pre-travel or over-travel models available Ratings up to 3 AMPS Reliable contact design RoHS compliant Typical Applications Detection Telecommunications and networking
E Series Sealed Miniature Rocker and Lever Handle Switches
Sealed Miniature and Lever Handle Switches Features/Benefits Sealed against solder and cleaning process contaminants ESD Resistance all actuator options, case & bushing UL 94V-0 RoHS compliant Typical
TYPICAL SWITCH ORDERING EXAMPLE. Contact Materials & Ratings. Silver Rated 125V AC & 250V AC Gold Rated 0.4VA 28V AC/DC max.
Large ushing Miniature Pushbuttons Series M000 S M Poles & ircuits 0 SPDT () 06 SPDT 06 DPDT () 08 DPDT 8 PDT () 8 PDT ( ) = Momentary Plunger Type TYPIL SWITH ORDERING EXMPLE 0 S W 0 D Plunger for Screw-on
ST SERIES - MINIATURE TOGGLE SWITCHES
ST SERIES - MINITURE TOGGLE SWITCHES FETURES Dry circuit through power ratings. Ultra-rugged construction SPDT & DPDT models with numerous options. Panel, panel & p.c. and p.c. mounting models, lighted
Sealed toggle switches
Distinctive features and specifications Completely sealed switching chamber Three types of terminals UL approved ELECTRICL SPECIFICTIONS Max. current/voltage rating with load and electrical life at full
Miniature Switches. Rocker, Toggle, Pushbutton & Slide
Worldwide Headquarters Carling Technologies, Inc., Connecticut, USA (860) 793-928, fax: (860) 793-923 e-mail: sales@carlingtech.com Eastern U.S. and Eastern Canada: (860)586-843, fax: (860) 586-853 e-mail:
7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoS compliant Typical Applications Telecommunications
Product Range. Rocker & Paddle Switches. Rocker & Paddle Switches. Rocker & Paddle Switches
Product Range for Panel Mounting: F, TRD and Gemini Series for PCB Mounting: Gemini Series Main features: Sealed or unsealed versions Various switch functions Gold or silver contacts LED illumination available
C&K 7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical Applications Telecommunications Instrumentation
C&K E Series Sealed Miniature Toggle Switches
Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available Typical Applications Telecommunications
General Specifications
Series M Waterproof Miniature eneral Specifications Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical apacity (Resistive
A Series 1-4 Pole Rotary Switches
1-4 Pole Switches Features/Benefits Multi-pole and multi-position Positive detent Shorting & non-shorting contacts Panel and PCB mounting RoHS Compliant Typical Applications Automotive Major and small
ELECTRICAL SPECIFICATIONS
Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Features/Benefits Multi-pole and multi-position Positive detent Shorting
ET Series Sealed Subminiature Toggle Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact size and small footprint save PCB
12000X778 SERIES - HIGH PERFORMANCE TOGGLE SWITCHES
000X778 SERES - HGH PERFORMNCE TOGGLE SWTCHES SPECFCTONS SUBJECT TO CHNGE WTHOUT NOTCE FETURES Designed for high reliability environments. Double shell case for high mechanical strength & high electrical
SP1-T100B1M1QE MINIATURE TOGGLE SWTH SPDT (RC)
DATA SHEET Order code Manufacturer code Description 75-0211 100-SP1-T100B1M1QE MINIATURE TOGGLE SWTH SPDT (RC) The enclosed information is believed to be correct, Information may change without notice
18000 series Snap-action momentary pushbutton switches
Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for
8000 series Momentary or alternate action pushbutton switches
Distinctive features and specifications ushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 3A 250VAC - 6A
.138 (3.50).024 (0.60) .370 (9.40) .185 (4.70) TYP. EPOXY SEAL.030 (0.80) .083 (2.11).740 (18.7) TYP. Standard Paddle Color - (Black) EPOXY SEAL
The Gemini Series "" Series Paddles Refer to Pages -7 For dditional Options MTRIL SPCIFICTIONS: Contacts/Terminals... Gold/gold flash Silver/tin lead Case Material... Thermoset 9V-0 ctuator Material...
8000 series. Momentary or alternate action pushbutton switches DISTINCTIVE FEATURES ELECTRICAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS
SW-8000-808 DISTINCTIVE FEATURES Momentary or alternate Bushing Ø 6.35 (/4) and Ø.9 (5/3) UL approved ELECTRICAL SPECIFICATIS Max. current/voltage rating with resistive load : - silver contacts : 4 A 30
9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview
A 9000 SERIES Overview 9 SERIES Number of poles 3 Single pole Electrical functions 2 Normally closed (NC) 3 Normally open (NO) Terminals, case and bushing Case height 8 (.314) 2 Straight terminals - threaded
MINIATURE SWITCHES. Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action)
Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action) MINIATURE SWITCHES PS SERIES 5 AMP. (S.P.) 1 AMP (D.P.) 0.4 VA DIRECT PANEL MOUNT Basic P/N Terminal Type Poles Cap
Pushbutton Switches Sub-Miniature
Pushbutton Switches Specifications: Contact rating Mechanical life Maximum contact resistance Minimum insulation resistance Dielectric strength Operating temperature Materials: Case Plunger Bushing Housing
5000 SERIES - MINIATURE TOGGLE SWITCHES
000 SERES - MNATURE TOGGLE SWTCHES A SPECFCATONS SUBJECT TO CHANGE WTHOUT NOTCE FEATURES Broadest selection offered in miniature switches. SPDT, DPDT, PDT & PDT models with numerous options. Numerous configurations
ET Series Sealed Subminiature Rocker Switches
ET Series Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications Instrumentation
ET Series Sealed Subminiature Rocker Switches
Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications Instrumentation Computers
ET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications
PA Series Sub-Miniature Pushbutton Switches
Sub-Miniature HOW TO ORDER SPECIFICATION: MAX. CURRENT/VOTAGE RATING WITH RESISTIVE OAD: 400mA 32VAC-100mA 50VDC-125mA 125VAC 500mA 48VAC - 200 ma 50VDC - 200mA 250VAC for metal material. INITIA CONTACT
Momentary or alternate action pushbutton switches. UL approved 3A 250VAC, 6A 125VAC. Availability : consult factory for details of approved models.
Distinctive features and specifications Bushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 4A 30VDC - gold
F Series Pushbutton Switches
F Series Features/Benefits Up to 10 poles per module Various contact terminals Various mounting & switch ganging configurations Mechanical indicator buttons RoHS compliant Typical pplications udio selection
M Series Half-inch Rotary Switches
Half-inch Switches Features/Benefits Multi-pole and multi-positions Panel and PCB mounting Stainless steel actuator Non-shorting contacts RoHS Compliant IP67 (F option only) Typical Applications Test equipment
PROTECTRON MONITORING CONNECTOR SYSTEM
MONITORING CONNECTOR SYSTEM 1MM VERTICL JCK TIP (TEST POINT) 1mm Vertical Jack Tip Insulated Conical Type P8001 : 5 max. : 5mW max. Insulation Resistance : 1000MW min. Dielectric Withstanding : 500V C
TP Series, Tiny. Features. Pushbutton Switches. Pushbutton Switches
TP Series, Tiny Features Compact design Round or rectangular actuator buttons. Vertical or versions Typical performance characteristics Contact configuration........................ SPST, SPDT, DPDT Contact
C&K ET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space Typical Applications Telecommunications Instrumentation
2SS/2S1/2SM SUB-MINIATURE TOGGLES
2SS/2S1/2SM 2S-Series SUB-MINIATURE TOGGLES The 2S family of sub-miniature toggle switches is composed of three switch series; the 2S1-Series toggle switch, the 2SS-Series sealed toggle switch, and the
MINIATURE SWITCHES. Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action)
Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action) MINIATURE SWITCHES PS SERIES 5 AMP. (S.P.) 1 AMP (D.P.) 0.4 VA DIRECT PANEL MOUNT ONE POLE TWO POLE Basic P/N Terminal
DM Series Miniature 2 Pole Power Rocker Switches
Miniature 2 Pole Power Switches Features/Benefits AMPS to AMPS Quick connect terminals Double pole in miniature size Recessed bracket available prevents accidental actuation RoHS compliant Typical Applications
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. C&K ET Series Sealed Subminiature Switches Features/Benefits Sealed against
C&K LM Series Subminiature Precision Snap-acting Switches
Models vailable Features/enefits Sealed actuator and case meets IP65 degree of protection Compact size ideal when space is limited Long life 100,000 cycles typical Reliable snap-acting mechanism Typical
RTA Series 1 4 Poles Coded Rotary Switches
1 4 Poles Coded Switches Features/Benefits PCB or hand soldering versions Bushing mounting Multiple poles Decimal and hexadecimal codes Screwdriver slot or extended actuator RoHS Compliant Typical Applications
Series AV. Pushbutton Switches NUT O-RING HOW TO ORDER
Pushbutton Switches SPECIFICATIS: BUSHING: 22mm. CTACT RATING: 2A @ 48VDC or 125VAC. ELECTRICAL LIFE: 10,000cycles at full load. CTACT RESISTANCE: 10m-ohms max. initial @2-4VDC. INSULATI RESISTANCE: 1,000M-ohms
5000 SERIES TOGGLE SWITCHES Distinctive features B
5000 SERES TOGGLE SWTCHES Distinctive features THE WDEST RANGE N MNATURE SWTCHES 7 7 actuators including toggles, paddle levers and locking levers in different lengths. 5 5 contact materials from dry circuit
Distinctive Characteristics
Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. ntistatic superstructure, consisting of the carbon impregnated bushing and the
SMT T SERIES SURFACE MOUNT TINY SWITCHES Distinctive features
Distinctive features ENTIRELY DESIGNED FOR SURFCE MOUNT Surface mount devices (SMD) are subjected to more stringent constraints of temperature, solderability and space savings than through-hole components.