Distinctive Characteristics
|
|
|
- Mervyn Potter
- 5 years ago
- Views:
Transcription
1 Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. ntistatic superstructure, consisting of the carbon impregnated bushing and the support bracket, prevents static discharge to the contacts. Static electricity from an operator s touch travels from actuator through the bushing and bracket to the PC board. Locking lever mechanism offered as a toggle option. Optional threaded, mm diameter bushing for panel seal mounting meets IP of IEC09 specifications (similar to NEM and ). Totally sealed body construction prevents contact contamination and allows timeand money-saving soldering and cleaning. Epoxy sealed terminals lock out flux and other contaminants. ward-winning STC contact mechanism with benefits unavailable in conventional mechanisms: smoother, positive detent actuation, increased contact stability and unparalleled logic-level reliability. (dditional STC details in Terms & cronyms; see Supplement section.).00 x.00 (.mm x.mm) terminal spacing conforms to standard PC board grid spacing. Illuminated toggles available and shown in the Illuminated Other section. ctual Size
2 General Specifications Electrical Capacity (Resistive Load) Logic Level: 0.V 8V C/DC maximum (pplicable Range 0.m ~ 0mV ~ 8V) Note: Find additional explanation of operating range in Supplement section. Other Ratings Contact Resistance: 0 milliohms maximum Insulation Resistance: 00 megohms 00V DC Dielectric Strength: 00V C minimum for minute minimum Mechanical Life: 00,000 operations minimum for On-None-On & On-Off-On 0,000 operations minimum for other circuits 0,000 operations minimum for locking lever models Electrical Life: 0,000 operations minimum Nominal Operating Force: Toggles,, E & K with Long Paddle:.7N (momentary);.8n (maintained) Toggles J & H & K with Short Paddle:.7N (momentary);.8n (maintained) Toggle L: 0.9N Contact Timing: Nonshorting (break-before-make) ngle of Throw: Materials & Finishes Toggle: ushing: Gasket: Case Housing: Support racket: Movable Contact: Stationary Contacts: Terminals: Environmental Data Operating Temperature Range: Humidity: Vibration: Shock: Nickel plated brass Carbon blended polyamide; nickel plated zinc alloy for locking levers & threaded bushing Nitrile butadiene rubber Glass fiber reinforced polyamide Tin plated phosphor bronze Phosphor bronze with gold plating Copper alloy with gold plating Copper alloy with gold plating 0 C through +8 C ( F through +8 F) 90 ~ 9% humidity for 9 0 C (0 F) 0 ~ Hz with peak-to-peak amplitude of.mm traversing the frequency range & returning in minute; right angled directions for hours 0G (90m/s ) acceleration (tested in right angled directions, with shocks in each direction) Installation Mounting Torque:.0 ~.Nm (. ~.98 lb in) for actuator with threaded bushing only PC Processing Soldering: Cleaning: Wave Soldering Recommended: See Profile in Supplement section. Manual Soldering: See Profile in Supplement section. utomated cleaning. See Cleaning specifications in Supplement section. Standards & Certifications Flammability Standards: UL Recognition or CS Certification: UL9V-0 available The Series toggles have not been tested for UL recognition or CS certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy.
3 TYPICL SWITCH ORDERING EXMPLE POLES SPDT DPDT PC TERMINLS P Straight * Straight with racket * H Right ngle with racket * V Vertical with racket W Straight Long * racketed models are ESD protected CIRCUITS NE NE () * R () NE 8 () () 9 () * S () ( ) = Momentary * Reverse circuits R & S available with right angle & vertical only J E H K L DESCRIPTI FOR TYPICL ORDERING EXMPLE.9 (0.0mm) at Toggle TOGGLES.9 (0.0mm) at. (8.0mm) at with Panel Seal Threaded ushing (Straight PC only).8 (.mm) at.9 (0.0mm) Flatted.8 (.mm) Flatted Snap Top for or Paddle Locking Lever (with Circuits & only) G J OPTIL CPS.9 (0.0mm) at Lever Cap.8 (.mm) at Lever Cap PDDLES Short Paddle for K Toggle Long Paddle for K Toggle CP COLORS PDDLE COLORS lack White C Red C --- Yellow E --- Green F --- lue G --- Gray H Straight PC Terminals with racket SPDT -NE- Circuit
4 Pole SP DP Model R 8 9 S R 8 9 S Toggle Position ( ) = Momentary Connected Terminals Throw & Schematics Up Center Down Up Center Down () () () () () () NE NE NE NE NE NE () () () () () () POLES & CIRCUITS Note: - OPEN - SPDT - - OPEN - - DPDT Terminal numbers are not actually on the switch. (COM) (COM) TOGGLES Standard Material & Finish: rass with right Nickel.9 (0.0mm) at. (8.0mm) at with Panel Seal Threaded ushing J.8 (.mm) at E.9 (0.0mm) Flatted (0.0).9 (.) Dia.0. (.) Dia.0 (.).8 (.) Dia.0 (0.0).9 (.).0 (.7).0 H K L.8 (.mm) Flatted Snap Top for Paddles Locking Lever (.).8 (.).0 (.).0 (.0).97 (.).098 (.).9 (.). (.9). (.8).8 (.) Dia.77 (.) Dia.0
5 PC TERMINLS Use of a support bracket is recommended to increase PC mounting strength and stability. P Straight Straight with racket H Right ngle with racket (.) Typ (0.) Dia Typ.0 (.) Typ (0.) Typ.0 (0.).00 (.) Typ.00 (0.) Dia Typ.0 (0.) Typ.0 (.). (.) Typ.00 (0.).0 (0.).0 (0.) Typ.00 (.) Typ.00 (0.) Dia Typ.0 V Vertical with racket (0.) Typ.00 (0.) Dia Typ.0 (.) Typ.00 (0.).0 (0.).0 W Straight Long.00 (8.9).7 (.) Typ.00 (0.) Dia Typ.0 OPTIL CPS G T00.9 (0.0mm) at Lever Cap J T0.8 (.mm) at Lever Cap Material: PVC Colors vailable:,, C (.0). (.0) Dia.8 (0.0).9 Material: PVC Colors vailable:,, C (7.0).7 (.0) Dia.8 (.).8 PDDLES T7 Short Paddle for K Toggle Material: Polyamide Colors vailable:,, C, E, F, G, H (0.).0 (.).09 (.).8 (.0).97 (9.).70 T8 Long Paddle for K Toggle Material: Polyamide Colors vailable:,, C, E, F, G, H (.).9 (.).09 (.0) Dia.97 (.).7 (.).9 Color Codes: C E F G lack White Red Yellow Green lue H Gray
6 TYPICL SWITCH DIMENSIS Straight PC (.0) Dia. (.8).8 (.) Dia.0 (.).8 (0.0).9.0 (.). (0.) Dia Typ.0 (.) Typ.00 (.). (.0).09. (.0).09 (.) Typ.00 Dia Typ.0 P Straight PC P (.0) Dia.. (.) Dia.0 (.).8 (0.0).9.0 (.). (0.) Dia Typ.0 (.) Typ.00 (.) (.) Typ.00 Dia Typ.0 Straight PC racket (.0) Dia. (.) Dia.0 (0.) Typ.0 (0.) Dia Typ.0 (0.) Typ.0 (.0).09 (0.).00. (.) Typ.00 (.0).. (.7).0 (0.0).9.0 (.). (.) Typ.00 (.). (.0).09 (.).00 Dia Typ.0 (.).00 Straight PC racket (.0) Dia. (.) Dia.0 (0.) Typ.0 (0.) Dia Typ.0.00 (0.).00. (.) Typ.00 (.0).. (.7).0 (0.0).9.0 (.). (.) Typ.00 (.). (0.) Typ.0.00 Dia Typ.0 Right ngle PC (.0) Dia. (0.) Typ.0.00 (.) Dia.0 (.7).0 (0.0).9 (0.).0 (.9). (.). (.)..00 (7.).87. (0.) Dia Typ.0 (.) Typ.00 (.) Typ Dia Typ.0 H
7 TYPICL SWITCH DIMENSIS Right ngle PC H (.0) Dia. (0.) Typ (.) Dia.0 (.7).0 (0.0).9 (0.).0 (.). (.). (.) (.).7 (0.).00. (0.) Dia Typ.0 (.) Typ.00 (.) Typ.00 (.) Dia Typ.0 Vertical PC V (.0) Dia. (0.) Typ.0 (.).00. (.) Dia.0 (.7).0 (0.0).9 (0.).0.00 (8.9).7 (.0).09 (.).7 (0.).00. (.) (.) Typ.00. (0.) Dia Typ.0 (.0).09 (.0).09 (.) Typ Dia Typ.0 C (.) L.00 Vertical PC V (.0) Dia. (0.) Typ (.) Dia.0 (.7).0 (0.0).9 (0.).0.00 (8.9).7 (.0).09 (.).7 (0.) (.).00. (.) Typ.00. (0.) Dia Typ (.) Typ Dia Typ.0 Locking Lever Straight PC racket (.0). (.) Dia (.) Dia.77.0 (0.) Typ.0 (0.) Dia Typ.0 (0.) Typ.0 (.0).09 L. (.8).8 (.). (.).9 (.).7 (.).0.0 (0.).00 (.) Typ.00 (.). (.0).09 (.).00. (.) Typ.00 Dia Typ.0 (.).00 Locking Lever Straight PC racket (.0) Dia. (.) Dia.77 (.) Dia.0 (0.) Typ.0 (0.) Dia Typ.0.00 L (.8). (8.8).8 (.8).8 (.). (.).9 (.).7 (.).0.0 (0.).00 (.) Typ.00 (.).. (0.) Typ.0.00 (.) Typ.00 Dia Typ.0
8 TYPICL SWITCH DIMENSIS Threaded ushing Straight PC Panel Seal (.8).89 (.8).8 (.) Dia.0 M P0.7. (.).7.0 (.).9 (0.) Dia Typ.0 (.) Typ.00 (.). (.0).09. (.0).09 (.) Typ.00 Dia Typ.0 P Threaded ushing Straight PC Panel Seal (.8).89. (.) Dia.0 M P0.7. (.).7.0 (.).9 (0.) Dia Typ.0 (.) Typ.00 (.).. (.) Typ (.) Typ.00 Dia Typ.0 P STNDRD HRDWRE & PNEL CUTOUT TM Metric Hex Nut T0 Gasket M P0.7 Material: rass, Nickel plated. Material: Nitrile butadiene rubber (.9).9 (.9).7 (.) (8.)..9 (.0).97 (.0). (9.0). (.).09 (.).0 Maximum Panel Thickness with Standard Hardware:.087 (.mm)
Distinctive Characteristics
Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. Antistatic superstructure, consisting of the carbon impregnated bushing and
General Specifications
Series WT Environmentally Sealed General Specifications Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical Capacity
Distinctive Characteristics
Distinctive Characteristics ntirotation design, standard on noncylindrical levers, mates toggle and bushing; bottom of toggles has two flatted sides which fit into a complementary opening inside bushing.
General Specifications
eneral Specifications Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Electrical apacity (Resistive Load) Power Level
General Specifications
Series D Light Touch Miniature Pushbuttons General Specifications Electrical apacity (Resistive Load) Logic Level: 0.VA maximum @ 8V A/D maximum (Applicable Range 0.mA ~ 0.A @ 0mV ~ 8V) Note: Find additional
General Specifications
Series M eneral Specifications Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical apacity (Resistive Load)
Distinctive Characteristics
Distinctive Characteristics Full face or spot illumination with incandescent lamps or multi-element LEDs, with or without resistors. Short Body Pushbuttons Series YB Choice of super bright LEDs in white,
General Specifications
Series JWS Internationally pproved Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators Tactiles Keylocks General Specifications Electrical
Contents Pushbuttons. AB Series...C6 0.4VA Logic Level; Process Sealed Straight, Right Angle, & Vertical PC
ontents Pushbuttons B Series... 0.V Logic Level; Process Sealed Straight, Right ngle, & Vertical P BB Series... ntistatic; 0.V Logic Level; Process Sealed Straight, Right ngle, & Vertical P DB Series...
General Specifications
Series E Light Touch Miniature Pushbuttons eneral Specifications Electrical apacity (Resistive Load) Power Level (silver): A @ 25V A for silver contacts Logic Level (gold): 0.4VA maximum @ 28V A/D maximum
TYPICAL SWITCH ORDERING EXAMPLE TERMINALS
Series M TYPIL SWITH ORDERIN EXMPLE M0 S 0 POLES SMLL TOLES SMLL BUSHINS ONTT MTERILS & RTINS OPTIONL PS P OLORS SPDT DPDT SPT PDT * PDT DPT * -pole available on vertical models only. IRUITS ON NONE ON
We Make It Easy! 3. All of our switches are shipped complete, just as ordered. No incomplete or partial deliveries of subcomponents and accessories
We Make It Easy! 1. We assemble the parts for you saves you time and money. Includes LEDs and accessories 2. Easy to order all options and accessories displayed in easy-to-follow ordering table. No complicated
Distinctive Characteristics
Distinctive Characteristics Various cap styles and colors to meet differing application needs. Bright, full face illumination to distinctively indicate status. Rear panel threaded mounting or snap-in mounter
Distinctive Characteristics
Distinctive Characteristics Carefully designed light diffusion and filtering system produce bright, full surface illumination with front panel relamping. Spot illumination available in single and bicolor
Distinctive Characteristics
Distinctive Characteristics High insulating material for 6mm CKM models withstands over 5 kilovolts of electrostatic discharge, thus providing antistatic feature. Rugged, die cast housing 9mm CKL models
General Specifications
Series CK High Security Keylocks General Specifications Electrical Capacity (Resistive Load) Power Level: 3A @ 50V AC Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical
General Specifications
Series M Waterproof Miniature eneral Specifications Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical apacity (Resistive
Distinctive Characteristics
Distinctive Characteristics Full face or spot illumination with incandescent lamps or multi-element LEDs, with or without resistors. Choice of super bright LEDs in white, green, and blue as well as bright
Distinctive Characteristics
Distinctive Characteristics Wide selection of illumination effects is achieved with single and bicolor, - or -element LEDs, in flat, beveled, or sculptured caps. LED colors include red, amber, green, white,
General Specifications
Series JW High Inrush 0 & 6 Amp Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement Accessories Indicators Tactiles Keylocks General Specifications Electrical
TYPICAL SWITCH ORDERING EXAMPLE. Contact Materials & Ratings. Silver Rated 125V AC & 250V AC Gold Rated 0.4VA 28V AC/DC max.
Large ushing Miniature Pushbuttons Series M000 S M Poles & ircuits 0 SPDT () 06 SPDT 06 DPDT () 08 DPDT 8 PDT () 8 PDT ( ) = Momentary Plunger Type TYPIL SWITH ORDERING EXMPLE 0 S W 0 D Plunger for Screw-on
General Specifications
Standard Size Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum
General Specifications
Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons General Specifications High Inrush 0 & 6 Amp Rockers Electrical Capacity (Resistive Load) Power Level: 0A @ 5/50V AC for
General Specifications
General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum (Applicable Range 0.1mA
TYPICAL SWITCH ORDERING EXAMPLE A2 G 40. Contact Materials & Ratings
MB4 s & ircuits SPDT ON (ON) DPDT ON (ON) ( ) = Momentary E E S S Bushings Smooth with D Flat Threaded with D Flat IMPORTNT: Switches are supplied without UL, culus & S marking unless specified. UL, culus
YB2 Panel Seal. New Square Actuator Option. Series YB2. Contact No Thin Flush Mount Pushbuttons. 24mm Square Panel Seal Pushbuttons
Contact No. 182 YB2 Panel eal Thin Flush Mount Pushbuttons New quare Actuator Option 2011-01-26 www.nkk.com 1 General pecifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V
General Specifications
General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum (Applicable Range 0.1mA
General Specifications
Series YB Short Body Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C
General Specifications
Series UB Low Profile Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 5A @ 5/50V AC or 5A @ 0V C Logic Level (gold): 0.VA maximum @ 8V AC/C maximum (Applicable
General Specifications
Series UB Low Profile Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 5A @ 5/50V AC or 5A @ 0V C Logic Level (gold): 0.VA maximum @ 8V AC/C maximum (Applicable
Distinctive Characteristics
Distinctive Characteristics Full face and spot illumination available. Front panel relamping. Choice of super bright LEDs in white, green, and blue in addition to bright red, amber, and green LEDs. Compact
General Specifications
General Specifications Electrical Capacity (Resistive oad) Power evel (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C ogic evel (gold): 0.4VA maximum @ 28V AC/C maximum (Applicable Range 0.1mA ~ 0.1A
Distinctive Characteristics
Standard Size Pushbuttons istinctive Characteristics Carefully designed light diffusion and filtering system produces bright, full surface illumination with front panel relamping. Spot illumination available
General Specifications
Series FB & SB Momentary Pushbuttons General Specifications FB Series Electrical apacity (Resistive Load) Power Level: 500mA @ 125V A for silver Logic Level: 0.4VA max. @ 28V A/D max. for gold (Applicable
General Specifications
General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum (Applicable Range 0.1mA
General Specifications
Series FB & SB Momentary Pushbuttons General Specifications FB Series Electrical apacity (Resistive Load) Power Level: 500mA @ 125V A for silver Logic Level: 0.4VA max. @ 28V A/D max. for gold (Applicable
CIT SWITCHTM ANT SPECIFICATIONS
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
General Specifications
Standard Size Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum
C&K E Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical Applications Telecommunications
ANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
5000 SERIES TOGGLE SWITCHES Distinctive features B
5000 SERES TOGGLE SWTCHES Distinctive features THE WDEST RANGE N MNATURE SWTCHES 7 7 actuators including toggles, paddle levers and locking levers in different lengths. 5 5 contact materials from dry circuit
E Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available
General Specifications
Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators eneral Specifications lectrical apacity Resistive Load: 0 @ 5V, @ 50V, or @ 0V Inductive Load: 5 @ 5V (P.. @.0) Other
S and SF series Washable miniature toggle switches
S and SF series Washable miniature toggle switches Distinctive features and specifications Sealed Secure assembly of the two case parts Internally sealed bushing Epoxy sealed terminals Process compatible
C&K E Series Sealed Miniature Toggle Switches
Models vailable Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical pplications Telecommunications
General Specifications
Series UB Low Profile Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): A @ /0V AC or A @ 0V C Logic Level (gold): 0.VA maximum @ 8V AC/C maximum (Applicable
ET Series Sealed Subminiature Toggle Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact size and small footprint save PCB
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Features/Benefits Multi-pole and multi-position Positive detent Shorting
C&K ET Series Sealed Subminiature Toggle Switches
Models vailable Features/Benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact sizeand small footprint save PCB space Typical
C&K E Series Sealed Miniature Toggle Switches
Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available Typical Applications Telecommunications
Series 300. Miniature Rocker & Paddle Switches
Series 00 SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 0,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. inital @ -VDC. 00mA for both
8500 Series Subminiature Pushbutton Switches
8500 Series Features/Benefits Pre-travel or over-travel models available Ratings up to 3 MPS Reliable contact design RoHS compliant Typical pplications Detection Telecommunications and networking equipment
Product Range. Rocker & Paddle Switches. Rocker & Paddle Switches. Rocker & Paddle Switches
Product Range for Panel Mounting: F, TRD and Gemini Series for PCB Mounting: Gemini Series Main features: Sealed or unsealed versions Various switch functions Gold or silver contacts LED illumination available
18000 series Snap-action momentary pushbutton switches
Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for
C&K ET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space Typical Applications Telecommunications Instrumentation
9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview
A 9000 SERIES Overview 9 SERIES Number of poles 3 Single pole Electrical functions 2 Normally closed (NC) 3 Normally open (NO) Terminals, case and bushing Case height 8 (.314) 2 Straight terminals - threaded
TP Series Tiny Pushbutton Switches
Tiny Switches Features/Benefits Subminiature size capable of switching 1 MP Vertical & right angle terminations PC & panel mount models Snap-in front panel mounting available Epoxy terminal seal-compatible
C&K 8060 Series Alternate Action and Momentary Pushbutton Switches
lternate ction and Momentary Switches Specifications CONTCT RTING: Q contact material: 6 MPS @ 120 V C or 28 V DC; 3 MPS @ 250 V C. See page -53 for additional ratings. ELECTRICL LIFE: 50,000 make-and-break
8000 series Momentary or alternate action pushbutton switches
Distinctive features and specifications ushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 3A 250VAC - 6A
ST SERIES - MINIATURE TOGGLE SWITCHES
ST SERIES - MINITURE TOGGLE SWITCHES FETURES Dry circuit through power ratings. Ultra-rugged construction SPDT & DPDT models with numerous options. Panel, panel & p.c. and p.c. mounting models, lighted
8060 Series Alternate Action and Momentary Pushbutton Switches
Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available Typical pplications Instrumentation Computers
8060 Series Alternate Action and Momentary Pushbutton Switches
lternate ction and Momentary Switches Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available
ANT. Materials. Features. Miniature Toggle
Specificationscations RoHS Compliant ANT Electrical Ratings Electrical Life Contact Resistance 5A @ 0VAC, 8VDC A @ 50VAC See Contact Options 50,000 cycles typical
E Series Sealed Miniature Rocker and Lever Handle Switches
Sealed Miniature and Lever Handle Switches Features/Benefits Sealed against solder and cleaning process contaminants ESD Resistance all actuator options, case & bushing UL 94V-0 RoHS compliant Typical
General Specifications
Series HB Subminiature Pushbuttons General Specifications Electrical apacity (Resistive Load) Power Level (silver): 0.1A maximum @ 30V A/ Other Ratings ontact Resistance: 50 milliohms maximum Insulation
Distinctive Characteristics
Distinctive haracteristics arefully designed light diffusion and filtering system produces bright, full surface illumination with front panel relamping. Spot illumination available in single and bicolor
SPECIFICATIONS: MATERIALS: If your preferred product configuration is not shown, please contact our sales representative for custom design.
SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 50,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. initial @2-4VDC 00mA for both silver
A Series 1-4 Pole Rotary Switches
1-4 Pole Switches Features/Benefits Multi-pole and multi-position Positive detent Shorting & non-shorting contacts Panel and PCB mounting RoHS Compliant Typical Applications Automotive Major and small
600H and 600NH series Toggle switches - high amperage
600H and 600NH series Toggle switches - high amperage Distinctive features and specifications UG1410 Construction Terminal and contact support are manufactured from a single piece of metal. The contacts
7000 Series Miniature Toggle Switches
Models vailable Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical pplications Telecommunications
C&K 8020 Series Snap-acting Momentary Pushbutton Switches
Snap-acting Momentary Switches Models Available Features/enefits Positive tactile feel Multi-positions available Wide variety of termination options Typical Applications Instrumentation Computer peripherals
8020 Series Snap-acting Momentary Pushbutton Switches
Snap-acting Momentary Switches Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS compliant
C&K 7000 Series Miniature Toggle Switches
Miniature Switches Models vailable Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical
General Specifications
General Specifications Electrical Capacity (Resistive oad) Power evel (silver): A @ 25/250V AC or A @ 30V C ogic evel (gold): 0.VA maximum @ 28V AC/C maximum (Applicable Range 0.mA ~ 0.A @ 20mV ~ 28V)
12000X778 SERIES - HIGH PERFORMANCE TOGGLE SWITCHES
000X778 SERES - HGH PERFORMNCE TOGGLE SWTCHES SPECFCTONS SUBJECT TO CHNGE WTHOUT NOTCE FETURES Designed for high reliability environments. Double shell case for high mechanical strength & high electrical
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. C&K ET Series Sealed Subminiature Switches Features/Benefits Sealed against
MINIATURE SWITCHES. Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action)
Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action) MINIATURE SWITCHES PS SERIES 5 AMP. (S.P.) 1 AMP (D.P.) 0.4 VA DIRECT PANEL MOUNT Basic P/N Terminal Type Poles Cap
Switches. SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY 115VAC, 28VDC)
SWITCH SELECTION GUIDE Toggle Switches SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive @ 115VAC, 28VDC) T1 2 or 3 Position, Momentary, 8A MIL-PRF-83731 15/32" or 1/4" dia.
General Specifications
General Specifications Electrical Capacity (Resistive oad) Power evel (silver): A @ 25/250V AC or A @ 30V C ogic evel (gold): 0.VA maximum @ 28V AC/C maximum (Applicable Range 0.mA ~ 0.A @ 20mV ~ 28V)
MINIATURE SWITCHES. Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action)
Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action) MINIATURE SWITCHES PS SERIES 5 AMP. (S.P.) 1 AMP (D.P.) 0.4 VA DIRECT PANEL MOUNT ONE POLE TWO POLE Basic P/N Terminal
MINIATURE POSITIVE ACTION SWITCHES MIL-S-8834 Miniature Positive Action Switches Solder Lug Terminals
MINIATURE POSITIVE ACTI SWITCHES FEATURES Sealed bushing Current rating versatility 1 and 2 pole circuitry Non-teasible mechanism for all but center "" circuits Dry circuit (logic level loads) to power
C&K 8020 Series Snap-acting Momentary Pushbutton Switches
Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS complient models available Typical pplications
T Series Subminiature Toggle Switches
Models vailable Features/Benefits Compact size small footprint Single and double pole models PC and panel mount options available Typical pplications Hand-held telecommunications Instrumentation Medical
KSB & KSF Series Low-profile Tact Switch
KS & KSF Series Low-profile Tact Switch Features/enefits Low profile Protected against flux KS without top sealing KSF with top sealing RoHS compliant and compatible Typical Applications Low profile keyboards
1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
C&K 7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical Applications Telecommunications
SP1-T100B1M1QE MINIATURE TOGGLE SWTH SPDT (RC)
DATA SHEET Order code Manufacturer code Description 75-0211 100-SP1-T100B1M1QE MINIATURE TOGGLE SWTH SPDT (RC) The enclosed information is believed to be correct, Information may change without notice
ET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications
13000 series Professional quick-break momentary pushbutton switches
Distinctive features and specifications PC and panel mount models ushing Ø 6,35 (1/4) and 11,9 (15/32) UL and CECC approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : -
C&K 7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical Applications Telecommunications Instrumentation
8500 Series Subminiature Pushbutton Switches
Subminiature Switches Features/Benefits Pre-travel or over-travel models available Ratings up to 3 AMPS Reliable contact design RoHS compliant Typical Applications Detection Telecommunications and networking
C&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
7000 Series Miniature Rocker & Lever Handle Switches
Miniature & Lever Handle Switches Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant
Miniature Toggle Switches
T80-T Miniature Toggle Switches Compliant D E L F R E E TCT DIP PUSH BUTT SLIDE ROCKER TOGGLE INDEX SPECIFICTIS CTCT RTING: @ VC or 8 VDC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full
ROCKER & LEVER SWITCHES
ROCKER & LEVER SWITCHES SEE ROCKER & LEVER SWITCH SELECTION GUIDE ON NEXT PAGE SPECIFICATIONS SUJECT TO CHANGE WITHOUT NOTICE APEM, PO OX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX:
Toggles Product Selection Guide
s Product Selection Guide s Series 7000 Military E ET T GT 9000 Switch Type Miniature Miniature Miniature Subminiature Subminiature Ultraminiature Power Poles/Throws,, 3PDT, 4PDT,,,, 3PDT SPST,, SPST,,
SERIES 100 SWITCHES TOGGLE SWITCHES - MINIATURE. Phone: Fax: SPECIFICATIONS MATERIALS
TACT SERIES 100 - MINIATURE SPECIFICATIONS Contact Rating: Life Expectancy: Contact Resistance: Insulation Resistance: Dielectric Strength: See contact material options 40,000 make-and-break cycles at
S E C Q - E - S T 1-2. Cap/ Sealing Hood (STD) 8.89 B solder lug Q (none) (none) Rubber Hood
T 8 0 1 3 - S E C Q - E - S 2 0 - T 1-2 Switch Function (SPDT) Actuator Bushing Termination Contact Switching Position Model No. S 10.41 E Epoxy Seal Vertical Support Bracket Cap/ Sealing Hood (STD) 8.89
SPECIFICATIONS MATERIALS. NONE = Black WHT= White RED = Red M1 M3 M5. YEL = Yellow. GRY = Gray PUR = Purple. **Contact E-Switch for additional colors
SERIES 300 AND PADDLE - MINIATURE FEATURES & BENEFITS Multiple rocker & paddle options Up to 4 poles Multiple termination options Snap-in panel mount option available HOW TO ORDER APPLICATIONS/MARKETS
Pushbutton and key switches
Pushbutton and key switches Section ZP Tiny, metal bushing, momentary 3 SMT TP Tiny, SMT, washable, momentary 5 TP Tiny, washable, momentary 7 9100-9200-9500 Subminiature, momentary 13 IF Miniature, sealed,