7000 Series Miniature Toggle Switches

Size: px
Start display at page:

Download "7000 Series Miniature Toggle Switches"

Transcription

1 Models vailable Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical pplications Telecommunications Instrumentation Medical equipment Build--Switch Our easy Build--Switch concept allows you to mix and match options to create the switch you need. Below is a complete listing of options shown in catalog. To order, simply select desired option from each category and place in the appropriate box. Switches with standard options are shown on pages -4 and -5. vailable options are shown and described on pages -6 thru -18. For additional options not shown in catalog, consult our Customer Service Center. Typical Example: S Y Z Q E Switch Function 7101 (STD.) SP On-None-On 7103 (STD.) SP On-Off-On 7201 (STD.) DP On-None-On 7203 (STD.) DP On-Off-On 7211 (STD.) DP On-On-On 7301 (STD.) 3P On-None-On 7401 (STD.) 4P On-None-On 7105 SP Mom.-Off-Mom SP On-Off-Mom SP On-None-Mom SP None-On-Mom DP Mom.-Off-Mom DP On-Off-Mom DP On-None-Mom DP None-On-Mom DP On-On-Mom DP Mom.-On-Mom P On-Off-On P Mom.-Off-Mom P On-Off-Mom P On-None-Mom P None-On-Mom P On-Off-On P Mom.-Off-Mom P On-Off-Mom P On-None-Mom P None-On-Mom P On-On-On P On-On-Mom P Mom.-On-Mom. Note: UL/CS models available, see page -6. Bushing Contact Material ctuator D (STD.).280 high, keyway B (STD.) Gold M (STD.).200 high H (STD.).296 high, flat Q (STD.) Silver Seal P3 (STD.) Flatted, anti-rotation, Y (STD.).350 high, keyway K Gold E (STD.) Epoxy.450 high NE No bushing M Silver I Epoxy potted S (STD.).410 high choice required G Gold over silver base T (STD.).687 high, 15/32 bushing CW Splashproof L Gold over silver K2 Locking lever,.704 high D8.280 high, flat ctuator Color/Finish K9 Locking lever,.704 high D9.280 high, keyway NE (STD.) Finish K12 Locking lever,.732 high H3.315 high, keyway 0 (STD.) ctuator finish K19 Locking lever,.732 high H4 8mm high, keyway with black bushing L.840 high Y1.378 high, keyway 1 White L1.640 high Y3 8.9mm high, keyway 2 Black L1P nti-rotation,.640 high Y4.378 high, flat 3 Red L2.550 high Y9.350 high, keyway 7 Blue L2P nti-rotation,.550 high Terminations S Satin chrome L3 Plastic,.840 high (STD.) Right angle, PC thru-hole L3P Plastic, anti-rotation, V2 (STD.) Vert. right angle, PC thru-hole KXX ctuator Color/Finish.840 high L40 Lever handle without cap L41 Lever handle with cap L42 Lever handle with cap C V3 Z 2 (STD.) PC Thru-hole (STD.).460 high, V-bracket (STD.) Solder lug Right angle, PC thru-hole NE (STD.) Natural aluminum 0 (STD.) Natural aluminum with black bushing 2 Black anodized aluminum LP nti-rotation,.840 high 3 Right angle, PC thru-hole 3 Red anodized aluminum MP nti-rotation,.200 high 4 Right angle, PC thru-hole 7 Blue anodized aluminum P1 Flatted, anti-rotation, 7 Right angle, PC thru-hole.840 high V3 Vert. right angle, PC thru-hole P4 Flatted, anti-rotation, W Right angle, extended, PC thru-hole.250 high SP nti-rotation,.420 high W1 Right angle, extended, PC thru-hole W3 Right angle, extended, PC thru-hole T1.460 high, 15/32 bushing T1P nti-rotation,.460 high, 15/32 bushing T2P Flatted, anti-rotation,.610 high, 15/32 bushing, TP nti-rotation,.687 high, 15/32 bushing W4 Right angle, extended, PC thru-hole R Right angle with PCB R2 Right angle with PCB V2.555 high, V-bracket V4.630 high, V-bracket V6.460 high, V-bracket V7.630 high, V-bracket V8.953 high, V-bracket V high, V-bracket V high, snap-in V-bracket V high, snap-in V-bracket V high, snap-in V-bracket V high, snap-in V-bracket V high, snap-in V-bracket V high, snap-in V-bracket V high, snap-in V-bracket W W1 W3 W4 W5 Z3.750 long, wire wrap.964 long, wire wrap.425 long, wire wrap long, wire wrap long, wire wrap Quick connect Bushing Finish NE (STD.) Nickel on all bushings (except D8, satin chrome) 2 Black C&K Components, Inc. Web Site: mericas Sales Tel: Fax: Europe Sales Tel: Fax: sia Sales Tel: Fax: Rev. 8/99-3

2 Specifications CTCT RTING: B contact material: 0.4 V 20 V C or DC max. Q contact material: V C or 28 V DC; V C. See page -18 for additional ratings. ELECTRICL LIFE: 7X01 and UX1 models: 100,000 make-and-break cycles at full load. ll other models: 40,000 cycles. CTCT RESISTNCE: Below 10 milliohms typ. 2-4 V DC, 100 m, for both silver and gold plated contacts. INSULTI RESISTNCE: 10 9 ohms min. DIELECTRIC STRENGTH: 1000 V RMS sea level. OPERTING TEMPERTURE: 30 C to 85 C. SOLDERBILITY: Per MIL-STD-202F method 208D, or EI RS-186E method 9 (1 hour steam aging). NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Materials CSE: Glass filled nylon 6/6, flame retardant, heat stabilized, or diallyl phthalate (DP) (UL 94V-0). CTUTOR: Brass, chrome plated. BUSHING: Brass or zinc, nickel plated. HOUSING: Stainless steel. SWITCH SUPPORT: Brass or steel, tin plated. END CTCTS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Coin silver, silver plated. See page -18 for additional contact materials. CENTER CTCTS & LL TERMINLS: B contact material: Copper alloy, with gold plate over nickel plate. Q contact material: Copper alloy, silver plated. See page -18 for additional contact materials. TERMINL SEL: Epoxy. HRDWRE: Nut & Locking Ring: Brass, nickel plated. Lockwasher: Steel, nickel plated. SWITCHES WITH STNDRD OPTIS 1/4-40 UNS-2 PRT NUMBER POS. 1 POS. 2 POS. 3 ÑÑÑ 7101SYZQE KEYWY Terminal Nos. For Reference Only 7101SYZBE 7101SYZGE 7101SYZQE 7103SYZQE 7105SYZQE 7107SYZQE 7108SYZQE MOM. = Momentary MOM. NOTE: For PC termination, replace Z with C. For panel mounting information, see page -9. For PC mounting information, see page -10. NE NE NE OFF OFF OFF NE MOM. MOM. MOM. 7201SYZQE 1/4-40 UNS-2 KEYWY Terminal Nos. For Reference Only PRT NUMBER 7201SYZQE 7203SYZQE 7205SYZQE 7207SYZQE 7208SYZQE 7211SYZQE MOM. = Momentary NOTE: For PC termination, replace Z with C. For panel mounting information, see page -9. For PC mounting information, see page -10. ÑÑÑ POS. 1 POS. 2 POS. 3 MOM. NE OFF OFF OFF NE MOM. MOM. MOM. 1/4-40 UNS-2 KEYWY POS. 1 POS. 2 POS. 3 PRT NUMBER 7301SYZQE 7303SYZQE 3PDT NE OFF 7301SYZQE 3PDT Terminal Nos. For Reference Only NOTE: For PC termination, replace Z with C. For panel mounting information, see page -9. For PC mounting information, see page C&K Components, Inc. Web Site: mericas Sales Tel: Fax: Europe Sales Tel: Fax: sia Sales Tel: Fax: Rev. 8/99

3 SWITCHES WITH STNDRD OPTIS 7000 Series PRT NUMBER 7401SYZQE 7403SYZQE 7411SYZQE 4PDT POS. 1 POS. 2 POS. 3 ÑÑ NE OFF 1/4-40 UNS-2 KEYWY NOTE: For PC termination, replace Z with C. For panel mounting information, see page -9. For PC mounting information, see page -10. Terminal Nos. For Reference Only 7401SYZQE 4PDT PRT NUMBER POS. 1 POS. 2 POS. 3 ÑÑÑ 7201MD9QE NE NOTE: For PC mounting information, see page -11. Terminals & Support SECTI - Terminal Nos. For Reference Only 7201MD9BE Horizontal ctuation PRT NUMBER POS. 1 POS. 2 POS. 3 ÑÑÑ 7301MD9BE 3PDT NE NOTE: For PC mounting information, see page -11. Terminals & Support SECTI - Terminal Nos. For Reference Only 7301MD9BE Horizontal ctuation 3PDT POS. 1 POS. 2 POS. 3 PRT NUMBER 7201MD9V2BE 2PDT NE NOTE: For PC mounting information, see page -13. SECTI - Terminal Nos. For Reference Only 7201MD9V2BE Vertical ctuation C&K Components, Inc. Web Site: mericas Sales Tel: Fax: Europe Sales Tel: Fax: sia Sales Tel: Fax: Rev. 8/99-5

4 SWITCH FUNCTI SWITCH FUNCTI CNECTED TERMINLS MODEL UL/CS** MODEL POS. 1 POS. 2 POS. 3 POS. 1 POS. 2 POS. 3 ÑÑÑ 7101 (STD.) U11 NE SCHEMTIC 7103 (STD.) U13 OFF SP 7105 U15 MOM. OFF MOM OPEN U17 OFF MOM U18 NE MOM U19 NE MOM. N/ (STD.) U21 NE 7203 (STD.) U23 OFF 7205 U25 MOM. OFF MOM. 2-3,5-6 OPEN 2-1, U27 OFF MOM. DP 7208 U28 NE MOM U29 NE MOM. N/ 2-3, , (STD.)* U211* 7213* U213* MOM. 2-3, , , * U215* MOM. MOM (STD.) U31 NE 7303 U33 OFF 3P 7305 U35 MOM. OFF MOM. 2-3,5-6,8-9 OPEN 2-1,5-4, U37 OFF MOM U38 NE MOM U39 NE MOM. N/ 2-3,5-6, ,5-4,8-7 3PDT 7401 (STD.) U41 NE 7403 U43 OFF 7405 U45 MOM. OFF MOM. 2-3,5-6,8-9, OPEN 2-1,5-4,8-7, U47 OFF MOM. 4P 7408 U48 NE MOM U49 NE MOM. N/ 2-3,5-6,8-9, ,5-4,8-7, * U411* 7413* U413* MOM. 2-3,5-6,8-9, ,5-4,8-9, ,5-4,8-7, * U415* MOM. MOM. 4PDT MOM. = Momentary * Wiring for 3-way switch, see page L-29. **U11 - U415 model nos. with all options when ordered with G, L, M or Q contact material. -6 C&K Components, Inc. Web Site: mericas Sales Tel: Fax: Europe Sales Tel: Fax: sia Sales Tel: Fax: Rev. 8/99

5 CTUTOR CTUTOR S (STD.).410 HIGH 1 M (STD.).200 HIGH 1 SP NTIROTTI,.420 HIGH 2, 3 MP NTIROTTI,.200 HIGH 2, Series CTUTOR FINISH L, L1, L2.840,.640,.550 HIGH 1 LP, L1P, L2P NTIROTTI,.840,.640,.550 HIGH 2, 3 * * *DIM. OPTI DIM. L, LP.840 (21,34) L1, L1P.640 (16,26) L2, L2P.550 (13,97) S actuator standard when ordered with C, W-W5, Z & Z3 terminations. M actuator standard when ordered with all terminations except C, W-W5, Z & Z3. NOTE: Caps are available separately, see page L-10. P1 FLTTED WITH NTIROTTI,.840 HIGH 2, 3 P3 (STD.) FLTTED WITH NTIROTTI,.450 HIGH 2, 3 P4 FLTTED WITH NTIROTTI,.250 HIGH 2, 3 * * * Dress nut part number supplied standard with threaded bushing. (Part number with metric threaded bushings.) T TP (STD.).687 HIGH 1, 2 NTIROTTI,.687 HIGH, 15/32 BUSHING 1, 2, 3 T1 T1P.460 HIGH 1, 2 NTIROTTI,.460 HIGH, 15/32 BUSHING 1, 2, 3 T2P FLTTED, NTIROTTI,.610 HIGH, 15/32 BUSHING 1, 2, 3 15/32-32 UNS-2 15/32-32 UNS-2 15/32-32 UNS-2 Bushing option code not required unless CW splashproof bushing ordered. TP & T1P actuators not available with CW splashproof bushing. ll TXX actuators not available on single pole models with -7, W-W4, R & R2 terminations. Bushing option code not required. T2P actuator not available with CW splashproof bushing or single pole models with -7, W-W4, R & R2 terminations. 1 L, L1, L2, M, S & TXX actuators not available with Y1 bushing. 2 LP, L1P, L2P, MP, P1, P3, P4, SP & TXX actuators not available with D8 & H4 bushing. 3 ntirotation: Provides anti- push-in feature on actuator. * dd.070 (1,78) for D, D8 & D9 bushings, subtract.020 (0,51) for H3 bushing. OPTI NE CTUTOR FINISH (STD.) BRIGHT CHROME - With Nickel Plated Bushing 2 (STD.) BLCK 0 BRIGHT CHROME - With Black Bushing S STIN CHROME NOTE: Black hardware is supplied when either black actuators or bushings are specified. ll hardware is available separately, see section L. C&K Components, Inc. Web Site: mericas Sales Tel: Fax: Europe Sales Tel: Fax: sia Sales Tel: Fax: Rev. 8/99-7

6 CTUTOR CTUTOR CTUTOR FINISH/COLOR K2 K9 LOCKING LEVER,.704 HIGH (threaded) LOCKING LEVER,.704 HIGH (unthreaded) K12 LOCKING LEVER,.732 HIGH (threaded) K19 LOCKING LEVER,.732 HIGH (unthreaded) OPTI NE CTUTOR CP FINISH (STD.) NTURL LUMINUM With Nickel Plated Bushing 0 (STD.) NTURL LUMINUM With Black Bushing 2 BLCK NODIZED LUMINUM 3 RED NODIZED LUMINUM 7 BLUE NODIZED LUMINUM Replaces K, K8 Replaces K1, K18 Locking Positions NOTE: To prevent accidental actuation, toggle must be lifted before being actuated. When released, toggle will lock in place. Overtightening mounting nut may cause actuator to bind. 01 Models 2 Position lock 03 & 11 Models 3 Position lock 05, 09 & 15 Models 1 Position lock 07 & 13 Models 2 Position lock 08 Models 1 Position lock Bushing option code not required unless CW splashproof bushing ordered. L40 LEVER HNDLE WITHOUT CP L41 PLSTIC LEVER HNDLE WITH NTIROTTI ND CP, P/N 4810 L42 PLSTIC LEVER HNDLE WITH NTIROTTI ND CP, P/N 4811 No color choice required. Finish: Matte (L41 & L42 ). L3 L3P PLSTIC,.840 HIGH NTIROTTI,.840 HIGH Gloss Plastic * OPTI PLSTIC CTUTOR COLORS NE (STD.) No ctuator Color (L40 option) 2 (STD.) BLCK 1 WHITE 3 RED Chrome Finish * dd.070 (1,78) for D, D8 & D9 bushings, subtract.020 (0,51) for H3 bushing. NOTE: Lever handle for L41 & L42 actuators supplied, but not installed. For interchangeability, order L40 actuator option and lever handles separately, see section L. L4X actuators not available with H4, Y1, Y4 bushings. ntirotation: Provides anti- push-in feature on actuator. -8 C&K Components, Inc. Web Site: mericas Sales Tel: Fax: Europe Sales Tel: Fax: sia Sales Tel: Fax: Rev. 8/99

7 Y (STD.).350 HIGH, THREDED, KEYWY Y9.350 HIGH, UNTHREDED, KEYWY NE NO BUSHING BUSHING D D8 D9 BUSHING (STD.).280 HIGH, THREDED, KEYWY.280 HIGH, UNTHREDED, FLT HIGH, UNTHREDED, KEYWY H BUSHING FINISH (STD.).296 HIGH, FLT, H3.315 HIGH, KEYWY, THREDED, HIGH TORQUE 1, 2 THREDED, HIGH TORQUE 1, 2 No bushing choice required with KXX, TXX actuators. (exception: Specify CW if splashproof bushing desired). 1/4-40 UNS-2 D8 D, D9 1/4-40 UNS-2 1/4-40 UNS-2 1/4-40 UNS-2 Y bushing standard with C, W - W5, Z or Z3 terminations. D9 bushing standard with all terminations except C, W - W5, Z or Z3. dd.070 (1,78) to all actuators lengths with D, D8 & D9 bushings. Subtract.020 (0,51) from all actuator lengths for H3 bushing. H4 8mm HIGH, KEYWY, THREDED, METRIC HIGH TORQUE 1, 2, 3 Y1.378 HIGH, KEYWY, THREDED, Y3 8.9mm HIGH, KEYWY, HIGH TORQUE 1, 2, 4 THREDED, METRIC Y4.378 HIGH, FLT, THREDED, HIGH TORQUE 1, 2, 5 1/4-40 UNS-2 1/4-40 UNS-2 CW THREDED, SPLSHPROOF 1, 2 For T & T1 actuators. For actuators other than T & T1. OPTI NE BUSHING FINISH (STD.) NICKEL on all bushings except D8 satin chrome. 2 BLCK 15/32-32 UNS-2 IP67 Degree of protection, totally protected against dust, full-scale voltage protection, temporary immersion. Internal actuator seal standard. External bushing seal washer available from: Multi-Flex Seals, Inc., Hackensack, NJ. Part number: MFS /4-40 UNS-2 IP67 Degree of protection, totally protected against dust, full-scale voltage protection, temporary immersion. Internal actuator seal and external bushing seal washer standard. 1 Will withstand 12 in.-lbs. of torque with no distortion. 2 CW. H, H3, H4, Y1 & Y4 bushings not available on single pole models with 4, R or R2 terminations. 3 D8 & H4 bushings available only with L, L1, L2, L3, M & S actuators. 4 Y1 bushing available only with LP, LXP, MP, PX & SP actuators. 5 Y4 bushing not available with L4X actuators. NOTE: Two mounting nuts, locking ring and lockwasher supplied standard with threaded bushings. Black hardware is supplied when either black bushings or actuators are specified. Optional mounting nut and locking ring styles and finishes available, see section L. PNEL MOUNTING 1/4 INCH BUSHING METRIC BUSHING 15/32 INCH BUSHING Without locking ring. With standard locking ring. With small locking ring. Without locking ring. With locking ring. Without locking ring. With standard locking ring. C&K Components, Inc. Web Site: mericas Sales Tel: Fax: Europe Sales Tel: Fax: sia Sales Tel: Fax: Rev. 8/99-9

8 TERMINTIS Z (STD.) SOLDER LUG C (STD.) PC THRU-HOLE.030 (0,76) Thk. thru 4PDT Not available with K, L or M contact materials. thru 4PDT Z3 QUICK CNECT W, W1, W3, W4, W5 WIRE WRP Dim OPTI DIM W.750 (19,05) W1.964 (24,48) W3.425 (10,80) thru 4PDT.030 (0,76) Thk. Not available with K, L or M contact materials. Mating quick connector available, order part number thru 4PDT.030 (0,76) Thk. W (26,97) W (33,15) (STD.) RIGHT NGLE, PC THRU-HOLE 7101MD9BE Horizontal ctuation ctuator Shown In Pos. 1 SECTI - Terminal Nos. For Reference Only Switch support with CW, H, H3, H4, Y1, Y4 bushings and KXX actuators. Part No. Shown: 7101MHBE 3 RIGHT NGLE, SNP-IN, PC THRU-HOLE W, W1, W3, W4 RIGHT NGLE, EXTENDED, PC THRU-HOLE OPTI DIM W.50 (12,7) Dim W1.72 (18,3) W3.20 (5,1) W4.83 (21,1) Terminal bend radii and lead-in manufacturing option. -10 C&K Components, Inc. Web Site: mericas Sales Tel: Fax: Europe Sales Tel: Fax: sia Sales Tel: Fax: Rev. 8/99

9 TERMINTIS (STD.) RIGHT NGLE, PC THRU-HOLE ctuator Shown In Pos. 1 Terminals & Support SECTI MD9BE Horizontal ctuation 3 RIGHT NGLE, SNP-IN, PC THRU-HOLE W, W1, W4 RIGHT NGLE, EXTENDED, PC THRU-HOLE OPTI DIM DIM.33 (8,4) W.19 (4,8) W1.40 (10,2) W4.50 (12,7) Terminal bend radii and lead-in manufacturing option. (STD.) RIGHT NGLE, PC THRU-HOLE ctuator Shown In Pos. 1 Terminals & Support W4 RIGHT NGLE, EXTENDED, PC THRU-HOLE SECTI MD9BE Horizontal ctuation 3PDT.18 (4,6).33 TYP. (8,4) Terminal bend radii and lead-in manufacturing option. C&K Components, Inc. Web Site: mericas Sales Tel: Fax: Europe Sales Tel: Fax: sia Sales Tel: Fax: Rev. 8/99-11

10 7000 Series 2 RIGHT NGLE, PC THRU-HOLE,.156 PITCH TERMINTIS 7101MH2BE Horizontal ctuation Terminals & Support ctuator Shown In Pos. 1 Switch support with CW, H, H3, H4, Y1, Y4 bushings and KXX actuators. Not available with TXX actuators and I seal. Terminal bend radii and lead-in manufacturing option. Part No. Shown: 7101MH2BE 4 RIGHT NGLE, PC THRU-HOLE,.156 PITCH 7101MD94BE Horizontal ctuation ctuator Shown In Pos. 1 Not available with KXX & TXX actuators, CW, H, H3, H4, Y1 & Y4 bushings, and I seal. Terminal bend radii and lead-in manufacturing option. NOTE: Termination options 4 & R2 are functionally identical and fit the same PC mounting pattern. The switches, however, are shifted relative to the mounting holes. Unlike the R2, the 4 option is available with any contact material and can be UL recognized and CS certified. The PC pattern must clear switch support legs. V2 (STD.) VERTICL RIGHT NGLE, PC THRU-HOLE,.150 PITCH 7101MD9V2BE Vertical ctuation ctuator Shown In Pos. 1 SECTI - V3 VERTICL RIGHT NGLE, SNP-IN, PC THRU-HOLE,.150 PITCH Terminal bend radii and lead-in manufacturing option. -12 C&K Components, Inc. Web Site: mericas Sales Tel: Fax: Europe Sales Tel: Fax: sia Sales Tel: Fax: Rev. 8/99

11 V2 (STD.) VERTICL RIGHT NGLE, PC THRU-HOLE,.150 PITCH TERMINTIS ctuator Shown In Pos. 1 SECTI MD9V2BE Vertical ctuation V3 VERTICL RIGHT NGLE, SNP-IN, PC THRU-HOLE,.150 PITCH Terminal bend radii and lead-in manufacturing option. V2 (STD.) VERTICL RIGHT NGLE, PC THRU-HOLE,.150 PITCH ctuator Shown In Pos. 1 SECTI MD9V2BE Vertical ctuation 3PDT V3 VERTICL RIGHT NGLE, SNP-IN,.150 PITCH Terminal bend radii and lead-in manufacturing option. C&K Components, Inc. Web Site: mericas Sales Tel: Fax: Europe Sales Tel: Fax: sia Sales Tel: Fax: Rev. 8/99-13

12 TERMINTIS V2 (STD.) VERTICL RIGHT NGLE, PC THRU-HOLE,.150 PITCH 7401MD9V2BE Vertical ctuation 4PDT ctuator Shown In Pos. 1 SECTI - V3 VERTICL RIGHT NGLE, SNP-IN, PC THRU-HOLE,.150 PITCH Terminal bend radii and lead-in manufacturing option. R RIGHT NGLE WITH PCB Terminals & Support 7101MD9RBE Horizontal ctuation ctuator Shown In Pos. 1 Not available with KXX & TXX actuators, CW, H, H3, H4, Y1 & Y4 bushings. Contact makes on same side actuator thrown. R2 RIGHT NGLE WITH PCB Terminals & Support 7101MD9R2BE Horizontal ctuation ctuator Shown In Pos. 1 Not available with KXX & TXX actuators, CW, H, H3, H4, Y1 & Y4 bushings. Contact makes on opposite side actuator thrown. -14 C&K Components, Inc. Web Site: mericas Sales Tel: Fax: Europe Sales Tel: Fax: sia Sales Tel: Fax: Rev. 8/99

13 TERMINTIS 7 RIGHT NGLE, PC THRU-HOLE,.025 SQURE,.200 PITCH Terminals & Support ctuator Shown In Pos. 1 SECTI MD97BE Horizontal ctuation Not available with KXX & TXX actuators, H, H3, H4, Y1 & Y4 bushings. I seal option. Terminal bend radii and lead-in manufacturing option. vailable with B contact material only. V2, V6, V7, V8 V21, V61, V71, V81 VERTICL MOUNT, V-BRCKET VERTICL MOUNT, V-BRCKET, SNP-IN Dim 7101MD9 BE Snap-In OPTI DIM V2, V (14,10) ctuator Shown In Pos. 1 V6, V (11, 68) V7, V (16, 00) V8, V (24, 21) V2, V6, V7, V8 V21, V61, V71, V81 VERTICL MOUNT, V-BRCKET VERTICL MOUNT, V-BRCKET, SNP-IN Dim 7201MD9 BE Snap-In OPTI DIM V2, V (14,10) V6, V (11, 68) ctuator Shown In Pos. 1 V7, V (16, 00) V8, V (24, 21) C&K Components, Inc. Web Site: mericas Sales Tel: Fax: Europe Sales Tel: Fax: sia Sales Tel: Fax: Rev. 8/99-15

14 7000 Series V2, V7, V8 V21, V71, V81 VERTICL MOUNT, V-BRCKET TERMINTIS VERTICL MOUNT, V-BRCKET, SNP-IN Dim Snap-In OPTI DIM 7301MD9 BE 3PDT ctuator Shown In Pos. 1 V2, V (14,10) V7, V (16, 00) V8, V (24, 21) V2, V7, V8 V21, V71, V81 VERTICL MOUNT, V-BRCKET VERTICL MOUNT, V-BRCKET, SNP-IN Dim Snap-In OPTI DIM 7401MD9 BE 4PDT ctuator Shown In Pos. 1 V2, V (14,10) V7, V (16, 00) V8, V (24, 21) V3 (STD.), V4, V9 V31, V41, V91 VERTICL MOUNT, V-BRCKET VERTICL MOUNT, V-BRCKET, SNP-IN Dim 7101MD9 BE ctuator Shown In Pos. 1 Snap-In OPTI DIM V3, V (11,68) V4, V (16,00) V9, V (29,21) -16 C&K Components, Inc. Web Site: mericas Sales Tel: Fax: Europe Sales Tel: Fax: sia Sales Tel: Fax: Rev. 8/99

15 TERMINTIS V3 (STD.), V4, V9 V31, V41, V91 VERTICL MOUNT, V-BRCKET VERTICL MOUNT, V-BRCKET, SNP-IN Dim 7201MD9 BE Snap-In OPTI DIM ctuator Shown In Pos. 1 V3, V (11,68) V4, V (16,00) V9, V (29,21) V4, V9 V41, V91 VERTICL MOUNT, V-BRCKET VERTICL MOUNT, V-BRCKET, SNP-IN Dim 7301MD9 BE 3PDT Snap-In OPTI DIM ctuator Shown In Pos. 1 V4, V (16,00) V9, V (29,21) V4, V9 V41, V91 VERTICL MOUNT, V-BRCKET VERTICL MOUNT, V-BRCKET, SNP-IN Dim 7401MD9 BE 4PDT Snap-In OPTI DIM ctuator Shown In Pos. 1 V4 V (16,00) V9, V (29,21) C&K Components, Inc. Web Site: mericas Sales Tel: Fax: Europe Sales Tel: Fax: sia Sales Tel: Fax: Rev. 8/99-17

16 CTCT MTERIL OPTI CTCT MTERIL TERMINL PLTING RTINGS B (STD.) GOLD 1 GOLD 1 LOW LEVEL / DRY CIRCUIT 0.4 V 20 V C OR DC MX. K TIN-LED 6 Q (STD.) SILVER 5 SILVER 45 4,5 POWER V C OR 28 V DC; V C. M TIN-LED 6 G L GOLD 3 GOLD OVER SILVER 2,3 LOW LEVEL / DRY CIRCUIT OR POWER 04VMX 0.4 MX. OR5MPS@120VCOR C TIN-LED 6 28 V DC; V C. CTCT MTERIL / PPLICTI RECOMMENDTIS SEE CHRT, PGE L CTCTS & TERMINLS: Copper alloy, with gold plate over nickel plate. 2 END CTCTS: Coin silver, with gold plate over nickel plate. 3 CENTER CTCTS & LL TERMINLS: Copper alloy, with gold plate over nickel plate. 4 END CTCTS: Coin silver, silver plated. 5 CENTER CTCT & LL TERMINLS: Copper alloy, silver plated. 6 TERMINLS: Copper alloy, with tin-lead alloy over nickel plate. U11 - U415 model numbers with all options when ordered with G, L, M or Q contact material. B contact material standard with all terminations, except C, Z & Z3. B contact material must be ordered with 7, W6 - W7, R, R2, W6 - W7 terminations. Q contact material standard with C, Z & Z3 terminations. K, L & M contact materials not available with Z & Z3 terminations. SEL E (STD.) EPOXY SEL I EPOXY POTTED BSE Dim. DIM SP.410 (10,41) DP.440 (11,18) 3P.505 (12,83) 4P.505 (12,83) Compatible with bottom-wash PC board cleaning methods. vailable with C, W - W5, Z & Z3 terminations only. -18 C&K Components, Inc. Web Site: mericas Sales Tel: Fax: Europe Sales Tel: Fax: sia Sales Tel: Fax: Rev. 8/99

C&K 7000 Series Miniature Toggle Switches

C&K 7000 Series Miniature Toggle Switches Miniature Switches Models vailable Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical

More information

T Series Subminiature Toggle Switches

T Series Subminiature Toggle Switches Models vailable Features/Benefits Compact size small footprint Single and double pole models PC and panel mount options available Typical pplications Hand-held telecommunications Instrumentation Medical

More information

C&K E Series Sealed Miniature Toggle Switches

C&K E Series Sealed Miniature Toggle Switches Models vailable Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical pplications Telecommunications

More information

C&K ET Series Sealed Subminiature Toggle Switches

C&K ET Series Sealed Subminiature Toggle Switches Models vailable Features/Benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact sizeand small footprint save PCB space Typical

More information

C&K 7000 Series Miniature Toggle Switches

C&K 7000 Series Miniature Toggle Switches Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical Applications Telecommunications

More information

7000 Series Miniature Toggle Switches

7000 Series Miniature Toggle Switches Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available

More information

onlinecomponents.com

onlinecomponents.com eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available Typical Applications

More information

7000 Series Miniature Toggle Switches

7000 Series Miniature Toggle Switches Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available

More information

C&K 8060 Series Alternate Action and Momentary Pushbutton Switches

C&K 8060 Series Alternate Action and Momentary Pushbutton Switches lternate ction and Momentary Switches Specifications CONTCT RTING: Q contact material: 6 MPS @ 120 V C or 28 V DC; 3 MPS @ 250 V C. See page -53 for additional ratings. ELECTRICL LIFE: 50,000 make-and-break

More information

8060 Series Alternate Action and Momentary Pushbutton Switches

8060 Series Alternate Action and Momentary Pushbutton Switches Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available Typical pplications Instrumentation Computers

More information

8020 Series Snap-acting Momentary Pushbutton Switches

8020 Series Snap-acting Momentary Pushbutton Switches Snap-acting Momentary Switches Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS compliant

More information

8060 Series Alternate Action and Momentary Pushbutton Switches

8060 Series Alternate Action and Momentary Pushbutton Switches lternate ction and Momentary Switches Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available

More information

C&K 8020 Series Snap-acting Momentary Pushbutton Switches

C&K 8020 Series Snap-acting Momentary Pushbutton Switches Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS complient models available Typical pplications

More information

TP Series Tiny Pushbutton Switches

TP Series Tiny Pushbutton Switches Tiny Switches Features/Benefits Subminiature size capable of switching 1 MP Vertical & right angle terminations PC & panel mount models Snap-in front panel mounting available Epoxy terminal seal-compatible

More information

EP Series Sealed Tiny Pushbutton Switches

EP Series Sealed Tiny Pushbutton Switches Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant models available

More information

EP Series Sealed Tiny Pushbutton Switches

EP Series Sealed Tiny Pushbutton Switches Sealed Tiny Switches Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant

More information

EP Series Sealed Tiny Pushbutton Switches

EP Series Sealed Tiny Pushbutton Switches Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant models available

More information

Toggles Product Selection Guide

Toggles Product Selection Guide s Product Selection Guide s Series 7000 Military E ET T GT 9000 Switch Type Miniature Miniature Miniature Subminiature Subminiature Ultraminiature Power Poles/Throws,, 3PDT, 4PDT,,,, 3PDT SPST,, SPST,,

More information

8500 Series Subminiature Pushbutton Switches

8500 Series Subminiature Pushbutton Switches 8500 Series Features/Benefits Pre-travel or over-travel models available Ratings up to 3 MPS Reliable contact design RoHS compliant Typical pplications Detection Telecommunications and networking equipment

More information

T Series Subminiature Toggle Switches

T Series Subminiature Toggle Switches eatures/benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation

More information

E Series Sealed Miniature Toggle Switches

E Series Sealed Miniature Toggle Switches Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available

More information

C&K 8020 Series Snap-acting Momentary Pushbutton Switches

C&K 8020 Series Snap-acting Momentary Pushbutton Switches Snap-acting Momentary Switches Models Available Features/enefits Positive tactile feel Multi-positions available Wide variety of termination options Typical Applications Instrumentation Computer peripherals

More information

C&K E Series Sealed Miniature Toggle Switches

C&K E Series Sealed Miniature Toggle Switches Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical Applications Telecommunications

More information

C&K T Series Subminiature Toggle Switches

C&K T Series Subminiature Toggle Switches Features/Benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation

More information

Miniature Toggle Switches

Miniature Toggle Switches T80-T Miniature Toggle Switches Compliant D E L F R E E TCT DIP PUSH BUTT SLIDE ROCKER TOGGLE INDEX SPECIFICTIS CTCT RTING: @ VC or 8 VDC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full

More information

T80-T Miniature Toggle Switches Compliant

T80-T Miniature Toggle Switches Compliant T80-T Miniature Toggle Switches Compliant TCT DIP PUSH BUTT SLIDE SPECIFICTIS CTCT RTING: @ VC or 8 VDC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full load CTCT RESISTNCE: 0 m max. initial

More information

C&K E Series Sealed Miniature Toggle Switches

C&K E Series Sealed Miniature Toggle Switches Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available Typical Applications Telecommunications

More information

C&K 7000 Series Miniature Rocker & Lever Handle Switches

C&K 7000 Series Miniature Rocker & Lever Handle Switches Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical Applications Telecommunications Instrumentation

More information

C&K 1000 Series Miniature Slide Switches

C&K 1000 Series Miniature Slide Switches Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &

More information

Pushbutton Product Selection Guide

Pushbutton Product Selection Guide Product Selection Guide Series Switch Type ELUM Mom./ Latching EP Tiny TP Tiny E00 800 Subminiature Snapacting Mom. acting Snap- Mom. E00 Miniature 8060 lternate ction 8500 Subminiature KM Poles/Throws

More information

1000 Series Miniature Slide Switches

1000 Series Miniature Slide Switches Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &

More information

7000 Series Miniature Rocker & Lever Handle Switches

7000 Series Miniature Rocker & Lever Handle Switches Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant Typical Applications Telecommunications

More information

7000 Series Miniature Rocker & Lever Handle Switches

7000 Series Miniature Rocker & Lever Handle Switches Miniature & Lever Handle Switches Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant

More information

Rockers Product Selection Guide

Rockers Product Selection Guide s Product Selection Guide Series 7000 E ET T 9000 DA D Switch Type Subminiature Subminiature & Lever andle Poles/Throws,, 3PDT, 4PDT,, 3PDT,, DPST, Max. Current 5 Amps 7.5 Amps 3 Amps 3 Amps 4 Amps Washable

More information

E Series Sealed Miniature Rocker and Lever Handle Switches

E Series Sealed Miniature Rocker and Lever Handle Switches Sealed Miniature and Lever Handle Switches Features/Benefits Sealed against solder and cleaning process contaminants ESD Resistance all actuator options, case & bushing UL 94V-0 RoHS compliant Typical

More information

7000 Series Miniature Rocker & Lever Handle Switches

7000 Series Miniature Rocker & Lever Handle Switches Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoS compliant Typical Applications Telecommunications

More information

C&K ET Series Sealed Subminiature Rocker Switches

C&K ET Series Sealed Subminiature Rocker Switches Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space Typical Applications Telecommunications Instrumentation

More information

Miniature Toggle Switches. Bushing. Termination B solder lug C P.C 1.27width D Quick connect D1 wire wrap(19.05) D3 wire wrap(10.

Miniature Toggle Switches. Bushing. Termination B solder lug C P.C 1.27width D Quick connect D1 wire wrap(19.05) D3 wire wrap(10. E L SPECIFICTIS CTCT RTING: @ VC or 8 VC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full load CTCT RESISTNCE: 0 m max. initial @- VC,00 m INSULTI RESISTNCE:,000 M min. IELECTRIC STRENGTH:,00

More information

ET Series Sealed Subminiature Toggle Switches

ET Series Sealed Subminiature Toggle Switches Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact size and small footprint save PCB

More information

T80-R Miniature Rocker and Paddle Switches Compliant

T80-R Miniature Rocker and Paddle Switches Compliant T80-R Miniature Rocker and Paddle Switches Compliant TCT DIP PUSH BUTT SLIDE ECIFICTIS MTERILS CTCT RTING: @ VC or 8 VDC ( Q terminal) CSE - diallyl phthalate ( ) ELECTRICL LIFE: 0,000 make-and-break cycles

More information

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. C&K ET Series Sealed Subminiature Switches Features/Benefits Sealed against

More information

C&K EP Series Sealed Tiny Pushbutton Switches

C&K EP Series Sealed Tiny Pushbutton Switches Models Available Features/enefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available Typical Applications

More information

ET Series Sealed Subminiature Rocker Switches

ET Series Sealed Subminiature Rocker Switches ET Series Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications Instrumentation

More information

ET Series Sealed Subminiature Rocker Switches

ET Series Sealed Subminiature Rocker Switches Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications Instrumentation Computers

More information

ET Series Sealed Subminiature Rocker Switches

ET Series Sealed Subminiature Rocker Switches Sealed Subminiature Switches Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications

More information

Distinctive Characteristics

Distinctive Characteristics Distinctive Characteristics ntirotation design, standard on noncylindrical levers, mates toggle and bushing; bottom of toggles has two flatted sides which fit into a complementary opening inside bushing.

More information

8500 Series Subminiature Pushbutton Switches

8500 Series Subminiature Pushbutton Switches Subminiature Switches Features/Benefits Pre-travel or over-travel models available Ratings up to 3 AMPS Reliable contact design RoHS compliant Typical Applications Detection Telecommunications and networking

More information

9000 Series Power Rocker and Lever Handle Switches

9000 Series Power Rocker and Lever Handle Switches Power and Lever Handle Switches Features/Benefits Thermoset UL 94V-0 housing Rugged construction Variety of actuator and termination options RoHS compliant Typical Applications Small equipment Shut-off

More information

T101J1ZQE2 T201J1ABE2 T101J1AVBE2 T101J1V3BE2. models available, see page B-52.

T101J1ZQE2 T201J1ABE2 T101J1AVBE2 T101J1V3BE2. models available, see page B-52. T101J1ZQE2 T201J1AE2 T101J1AVE2 T101J1V3E2 models available, see page -52. Easy uild-a-switch elow is a complete listing of available options for T SERIES TINY ROCKER SWITCHES. uild-a-switch allows you

More information

C&K ET Series Sealed Subminiature Rocker Switches

C&K ET Series Sealed Subminiature Rocker Switches Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoS compliant Typical Applications Telecommunications Instrumentation Computers

More information

Series 300. Miniature Rocker & Paddle Switches

Series 300. Miniature Rocker & Paddle Switches Series 00 SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 0,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. inital @ -VDC. 00mA for both

More information

SPECIFICATIONS: MATERIALS: If your preferred product configuration is not shown, please contact our sales representative for custom design.

SPECIFICATIONS: MATERIALS: If your preferred product configuration is not shown, please contact our sales representative for custom design. SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 50,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. initial @2-4VDC 00mA for both silver

More information

SERIES 100 SWITCHES TOGGLE SWITCHES - MINIATURE. Phone: Fax: SPECIFICATIONS MATERIALS

SERIES 100 SWITCHES TOGGLE SWITCHES - MINIATURE. Phone: Fax: SPECIFICATIONS MATERIALS TACT SERIES 100 - MINIATURE SPECIFICATIONS Contact Rating: Life Expectancy: Contact Resistance: Insulation Resistance: Dielectric Strength: See contact material options 40,000 make-and-break cycles at

More information

ST SERIES - MINIATURE TOGGLE SWITCHES

ST SERIES - MINIATURE TOGGLE SWITCHES ST SERIES - MINITURE TOGGLE SWITCHES FETURES Dry circuit through power ratings. Ultra-rugged construction SPDT & DPDT models with numerous options. Panel, panel & p.c. and p.c. mounting models, lighted

More information

ANT. Materials. Features. Miniature Toggle

ANT. Materials. Features. Miniature Toggle Specificationscations RoHS Compliant ANT Electrical Ratings Electrical Life Contact Resistance 5A @ 0VAC, 8VDC A @ 50VAC See Contact Options 50,000 cycles typical

More information

SERIES 34A Miniature Toggle Switches

SERIES 34A Miniature Toggle Switches DIP Switches Toggle Switches Series A: Miniature Toggle Switches SERIES A Miniature Toggle Switches FEATURES Save Space and Weight,, PDT, and DPT Circuitry Choice of Actuators, Bushings and Terminations

More information

General Specifications

General Specifications eneral Specifications Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Electrical apacity (Resistive Load) Power Level

More information

CIT SWITCHTM ANT SPECIFICATIONS

CIT SWITCHTM ANT SPECIFICATIONS Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability

More information

.410 (10.41) 1/4-40 UNS-2A Ø.115 (Ø 2.92) .410 (10.41) Ø.115 (Ø 2.92) Ø.115 (Ø 2.92)

.410 (10.41) 1/4-40 UNS-2A Ø.115 (Ø 2.92) .410 (10.41) Ø.115 (Ø 2.92) Ø.115 (Ø 2.92) Series A: Miniature Switches Series A Miniature Switches FEATURES Save Space and Weight,, PDT, and DPT Circuitry Choice of Actuators, Bushings and Terminations UL Recognized Models In inches (and millimeters)

More information

M Series Half-inch Rotary Switches

M Series Half-inch Rotary Switches Half-inch Switches Features/Benefits Multi-pole and multi-positions Panel and PCB mounting Stainless steel actuator Non-shorting contacts RoHS Compliant IP67 (F option only) Typical Applications Test equipment

More information

C&K 1000 Series Miniature Slide Switches

C&K 1000 Series Miniature Slide Switches Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available poxy terminal seal compatible with bottom-wash cleaning Typical Applications Test & measurement equipment

More information

.570 (14.48).415 (10.54) Ø.115 (Ø 2.92) .410 (10.41) Ø.115 (Ø 2.92) Ø.115 (Ø 2.92)

.570 (14.48).415 (10.54) Ø.115 (Ø 2.92) .410 (10.41) Ø.115 (Ø 2.92) Ø.115 (Ø 2.92) Series A: Miniature Toggle Switches SERIES A Miniature Toggle Switches FEATURES Save Space and Weight,, PDT, and DPT Circuitry Choice of Actuators, Bushings and Terminations UL Recognized Toggle Switches

More information

General Specifications

General Specifications Series M eneral Specifications Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical apacity (Resistive Load)

More information

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Features/Benefits Multi-pole and multi-position Positive detent Shorting

More information

F Series Pushbutton Switches

F Series Pushbutton Switches F Series Features/Benefits Up to 10 poles per module Various contact terminals Various mounting & switch ganging configurations Mechanical indicator buttons RoHS compliant Typical pplications udio selection

More information

MINIATURE SWITCHES. Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action)

MINIATURE SWITCHES. Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action) Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action) MINIATURE SWITCHES PS SERIES 5 AMP. (S.P.) 1 AMP (D.P.) 0.4 VA DIRECT PANEL MOUNT Basic P/N Terminal Type Poles Cap

More information

TYPICAL SWITCH ORDERING EXAMPLE TERMINALS

TYPICAL SWITCH ORDERING EXAMPLE TERMINALS Series M TYPIL SWITH ORDERIN EXMPLE M0 S 0 POLES SMLL TOLES SMLL BUSHINS ONTT MTERILS & RTINS OPTIONL PS P OLORS SPDT DPDT SPT PDT * PDT DPT * -pole available on vertical models only. IRUITS ON NONE ON

More information

A Series 1-4 Pole Rotary Switches

A Series 1-4 Pole Rotary Switches 1-4 Pole Switches Features/Benefits Multi-pole and multi-position Positive detent Shorting & non-shorting contacts Panel and PCB mounting RoHS Compliant Typical Applications Automotive Major and small

More information

2M Series Sub-Miniature Toggle Switches

2M Series Sub-Miniature Toggle Switches M Series Sub-Miniature Toggle Switches SPECIFICATIS CTACT RATING: Dependent upon contact material See Page 8. MECHANICAL LIFE: 0,000 make-and-break cycles. CTACT RESISTANCE: 0 m max. initial @ -VDC 00mA

More information

C&K LM Series Subminiature Precision Snap-acting Switches

C&K LM Series Subminiature Precision Snap-acting Switches Models vailable Features/enefits Sealed actuator and case meets IP65 degree of protection Compact size ideal when space is limited Long life 100,000 cycles typical Reliable snap-acting mechanism Typical

More information

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Switches Features/Benefits Up to 10 poles per module Various contact terminals

More information

Snap Action Miniature Pushbutton Switches

Snap Action Miniature Pushbutton Switches Snap Action Miniature Switches SERIES 38C Miniature Switches FEATURES and Circuitry Choice of Bushings, and Terminations Caps and Frames Available UL Recoginized DIMENSIONS IN INCHES (AND MILLIMETERS)

More information

S and SF series Washable miniature toggle switches

S and SF series Washable miniature toggle switches S and SF series Washable miniature toggle switches Distinctive features and specifications Sealed Secure assembly of the two case parts Internally sealed bushing Epoxy sealed terminals Process compatible

More information

SPECIFICATIONS MATERIALS. NONE = Black WHT= White RED = Red M1 M3 M5. YEL = Yellow. GRY = Gray PUR = Purple. **Contact E-Switch for additional colors

SPECIFICATIONS MATERIALS. NONE = Black WHT= White RED = Red M1 M3 M5. YEL = Yellow. GRY = Gray PUR = Purple. **Contact E-Switch for additional colors SERIES 300 AND PADDLE - MINIATURE FEATURES & BENEFITS Multiple rocker & paddle options Up to 4 poles Multiple termination options Snap-in panel mount option available HOW TO ORDER APPLICATIONS/MARKETS

More information

12000X778 SERIES - HIGH PERFORMANCE TOGGLE SWITCHES

12000X778 SERIES - HIGH PERFORMANCE TOGGLE SWITCHES 000X778 SERES - HGH PERFORMNCE TOGGLE SWTCHES SPECFCTONS SUBJECT TO CHNGE WTHOUT NOTCE FETURES Designed for high reliability environments. Double shell case for high mechanical strength & high electrical

More information

General Specifications

General Specifications Series WT Environmentally Sealed General Specifications Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical Capacity

More information

General Specifications

General Specifications Series M Waterproof Miniature eneral Specifications Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical apacity (Resistive

More information

5000 SERIES - MINIATURE TOGGLE SWITCHES

5000 SERIES - MINIATURE TOGGLE SWITCHES 000 SERES - MNATURE TOGGLE SWTCHES A SPECFCATONS SUBJECT TO CHANGE WTHOUT NOTCE FEATURES Broadest selection offered in miniature switches. SPDT, DPDT, PDT & PDT models with numerous options. Numerous configurations

More information

SPDT DPDT 3PDT 4PDT SWITCHES TACT POS 1 POS 2 POS 3. Model No.

SPDT DPDT 3PDT 4PDT SWITCHES TACT POS 1 POS 2 POS 3. Model No. SCHEMATIC 3 2 1 Model No. SP-1 ON NONE ON SP-2 ON NONE (ON) SP-3 ON OFF ON SP-4 (ON) OFF (ON) SP-5 ON OFF (ON) Term. Comm. 2-3 OPEN 2-1 ( ) = Momentary 6 5 4 3 2 1 Model No. DP-1 ON NONE ON DP-2 ON NONE

More information

C&K DA Series Miniature Single Pole Rocker Switches

C&K DA Series Miniature Single Pole Rocker Switches Features/Benefits Typical Applications Nice actuator styling with Small appliances multiple options Computers and peripherals Guards to prevent accidental Medical instrumentation actuation Momentary and

More information

Sealed toggle switches

Sealed toggle switches Distinctive features and specifications Completely sealed switching chamber Three types of terminals UL approved ELECTRICL SPECIFICTIONS Max. current/voltage rating with load and electrical life at full

More information

2SS/2S1/2SM SUB-MINIATURE TOGGLES

2SS/2S1/2SM SUB-MINIATURE TOGGLES 2SS/2S1/2SM 2S-Series SUB-MINIATURE TOGGLES The 2S family of sub-miniature toggle switches is composed of three switch series; the 2S1-Series toggle switch, the 2SS-Series sealed toggle switch, and the

More information

Distinctive Characteristics

Distinctive Characteristics Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. ntistatic superstructure, consisting of the carbon impregnated bushing and the

More information

GT Series Sealed Ultraminiature Toggle Switches

GT Series Sealed Ultraminiature Toggle Switches Sealed Ultraminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants Ultraminiature size, smallest footprint available Thru-hole and surface mount models High temperature

More information

C&K NE-18 Series Mains / Power Switches

C&K NE-18 Series Mains / Power Switches C&K NE-18 Series Features/Benefits Chassis or panel mount Various buttons and illumination Various contact configurations Typical pplications Mains/power switching Consumer electronics udio equipment Digital

More information

D Series Miniature Snap-in Power Rocker Switches

D Series Miniature Snap-in Power Rocker Switches Miniature Snap-in Power Switches Features/Benefits Momentary and maintained models PC and quick connect terminals Recessed bracket available prevents accidental actuation RoS compliant Typical Applications

More information

ANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871

ANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871 Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability

More information

RTBH Series 1-2 Pole Coded Rotary Switches

RTBH Series 1-2 Pole Coded Rotary Switches RTBH Series 1-2 Pole Coded Switches Features/Benefits Totally sealed Detent angles, 15, 22.5, 30 and 36 Multi pole Coding functions Robust construction RoHS Compliant Typical Applications Telecommunications

More information

TYPICAL SWITCH ORDERING EXAMPLE. Contact Materials & Ratings. Silver Rated 125V AC & 250V AC Gold Rated 0.4VA 28V AC/DC max.

TYPICAL SWITCH ORDERING EXAMPLE. Contact Materials & Ratings. Silver Rated 125V AC & 250V AC Gold Rated 0.4VA 28V AC/DC max. Large ushing Miniature Pushbuttons Series M000 S M Poles & ircuits 0 SPDT () 06 SPDT 06 DPDT () 08 DPDT 8 PDT () 8 PDT ( ) = Momentary Plunger Type TYPIL SWITH ORDERING EXMPLE 0 S W 0 D Plunger for Screw-on

More information

MINIATURE SWITCHES. Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action)

MINIATURE SWITCHES. Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action) Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action) MINIATURE SWITCHES PS SERIES 5 AMP. (S.P.) 1 AMP (D.P.) 0.4 VA DIRECT PANEL MOUNT ONE POLE TWO POLE Basic P/N Terminal

More information

Pushbutton Switches Sub-Miniature

Pushbutton Switches Sub-Miniature Pushbutton Switches Specifications: Contact rating Mechanical life Maximum contact resistance Minimum insulation resistance Dielectric strength Operating temperature Materials: Case Plunger Bushing Housing

More information

DM Series Miniature 2 Pole Power Rocker Switches

DM Series Miniature 2 Pole Power Rocker Switches Miniature 2 Pole Power Switches Features/Benefits AMPS to AMPS Quick connect terminals Double pole in miniature size Recessed bracket available prevents accidental actuation RoHS compliant Typical Applications

More information

General Specifications

General Specifications Series JWS Internationally pproved Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators Tactiles Keylocks General Specifications Electrical

More information

C&K GT Series Sealed Ultraminiature Toggle Switches

C&K GT Series Sealed Ultraminiature Toggle Switches C&K T Series Sealed Ultraminiature Switches Features/Benefits Sealed against solder and cleaning process contaminants Ultraminiature size, smallest footprint available Thru-hole and surface mount models

More information

Series 47B: Sealed Miniature Rocker and Paddle Switches

Series 47B: Sealed Miniature Rocker and Paddle Switches Series 7B: Sealed Miniature and Paddle Switches SERIES 7B Sealed Miniature and Paddle Switches FEATURES Save Space and Weight, and PDT Circuitry Choice of Actuators and Terminations Sealed per IP-7 DIP

More information

.138 (3.50).024 (0.60) .370 (9.40) .185 (4.70) TYP. EPOXY SEAL.030 (0.80) .083 (2.11).740 (18.7) TYP. Standard Paddle Color - (Black) EPOXY SEAL

.138 (3.50).024 (0.60) .370 (9.40) .185 (4.70) TYP. EPOXY SEAL.030 (0.80) .083 (2.11).740 (18.7) TYP. Standard Paddle Color - (Black) EPOXY SEAL The Gemini Series "" Series Paddles Refer to Pages -7 For dditional Options MTRIL SPCIFICTIONS: Contacts/Terminals... Gold/gold flash Silver/tin lead Case Material... Thermoset 9V-0 ctuator Material...

More information

RTA Series 1 4 Poles Coded Rotary Switches

RTA Series 1 4 Poles Coded Rotary Switches 1 4 Poles Coded Switches Features/Benefits PCB or hand soldering versions Bushing mounting Multiple poles Decimal and hexadecimal codes Screwdriver slot or extended actuator RoHS Compliant Typical Applications

More information

Rotary Switches Product Selection Guide

Rotary Switches Product Selection Guide Switches Product Selection Guide Series A RTA M R F H RW RM ENC Switch Type Multi-pole/ Multi-position Multi-pole/ Multi-position Half-inch Rota-slide Rota-slide Power Rota-slide Subminiature SMT Subminiature

More information

ST SERIES - MINIATURE TOGGLE SWITCHES

ST SERIES - MINIATURE TOGGLE SWITCHES ST SERIES - MINIATURE TOGGLE SWITCHES K FEATURES Dry circuit through power ratings. Ultra-rugged construction SPDT & DPDT models with numerous options. Panel, panel & p.c. and p.c. mounting models, lighted

More information

8000 series. Momentary or alternate action pushbutton switches DISTINCTIVE FEATURES ELECTRICAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS

8000 series. Momentary or alternate action pushbutton switches DISTINCTIVE FEATURES ELECTRICAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS SW-8000-808 DISTINCTIVE FEATURES Momentary or alternate Bushing Ø 6.35 (/4) and Ø.9 (5/3) UL approved ELECTRICAL SPECIFICATIS Max. current/voltage rating with resistive load : - silver contacts : 4 A 30

More information