General Specifications
|
|
- Maria Chambers
- 5 years ago
- Views:
Transcription
1 Series JW High Inrush 0 & 6 Amp Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement Accessories Indicators Tactiles Keylocks General Specifications Electrical Capacity (Resistive Load) Power Level: 5/50V AC for JWM & JWMW models; 30V DC for JWMW; 5/50V AC for JWL & JWLW models; 7V DC for telecommunication applications Other Ratings Contact Resistance: 0 milliohms maximum for JWM & JWMW; 0 milliohms maximum for JWL & JWLW Insulation Resistance:,000 megohms 500V DC Dielectric Strength:,000V AC minimum between contacts for minute minimum; 4,000V AC minimum between contacts & case for minute minimum Mechanical Life: 5,000 operations minimum Electrical Life: 5,000 operations minimum Nominal Operating Force: JWM & JWMW Single Pole 3.9N & Double Pole 7.84N JWL Single Pole 5.00N & Double Pole 0.00N; JWLW Double Pole 0.00N Angle of Throw: 6 Materials & Finishes Rocker: Polyphenylene ether (UL94V-0) Contacts: JWM & JWMW: Silver alloy with silver plating Housing/Frame & arrier: Polyamide (UL94V-0) JWL & JWLW: Silver alloy plus copper with Interior Seal for JWM & JWL: Polyphenylene sulfide (UL94V-0) silver plating Case/ase: Melamine (UL94V-0) Terminals: rass with silver plating Environmental Data Operating Temperature Range: Humidity: Vibration: Shock: Sealing: Installation Soldering Time & Temperature: 5 C through +70 C ( 3 F through +58 F) for JWM & JWL; 5 C through +85 C ( 3 F through +85 F) for panel seal JWMW & JWLW models 90 ~ 95% humidity for C (04 F) 0 ~ 55Hz with peak-to-peak amplitude of.5mm traversing the frequency range & returning in minute; 3 right angled directions for hours 50G (490m/s ) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) IP67 of IEC6059 standard for panel seal JWMW & JWLW models; dust resistant inner seal for others Manual Soldering: See Profile A in Supplement section. Standards & Certifications Flammability Standards: UL94V-0 for rocker, housing, seal & case/base of JWL, JWM, JWMW & JWLW models TV Ratings for UL & CSA: JWM (TV-5) Overload 0V AC for 50 operations: Steady State Current (rms) 7.5A; Minimum Inrush Current (peak) A. JWM (TV-5) Endurance 0V AC for 5,000 operations: Steady State Current (rms) 5A; Minimum Inrush Current (peak) 78A. JWL (TV-8) Overload 0V AC for 50 operations: Steady State Current (rms) A; Minimum Inrush Current (peak) 63A. JWL (TV-8) Endurance 0V AC for 5,000 operations: Steady State Current (rms) 8A; Minimum Inrush Current (peak) 7A. UL: File No. E4445 JWM & JWMW models recognized at 50V AC. JWMW recognized at 30V DC. JWL & JWLW models recognized at 50V AC; JWL at 7V DC. Models below recognized only when ordered with marking on switch. JWMW: add /U to end of part number to order UL mark on switch; add /CUL to end of part number to order culus mark on switch. JWL: add /U-DC to end of part number to request UL rating on DC rated switch. CSA: File No _0_000 JWM & JWMW models certified at 50V AC; JWL models certified at 50V AC VDE: License No JWM models approved at steady state 5A, inrush 80A, resistive 0A, & motor load 6A all at 50V AC; JWL models approved at steady state inrush 8A, resistive 6A, & motor load 8A all at 50V AC. Note: JWM & JWL Double Pole, Single Throw models approved only with the international ON-OFF symbols on the actuator. 40
2 High Inrush 0 & 6 Amp Rockers Series JW Distinctive Characteristics Industry s first molded rocker with TV rating. Designed to handle large inrush current, with high electrical capacity of 0 and 6 Amps. JWM models certified for TV-5 rating and JWL models for TV-8 rating. JWMW and JWLW panel seal versions meet IP67 of IEC6059 Standards (similar to NEMA 4 and 6). Prominent external insulating barriers increase insulation resistance and dielectric strength. Uniquely constructed to break light contact welds. Increased electrical life with specially designed plate to minimize contact bounce. Constructed for dust resistance with interior cover between actuator and contact area. Terminals are molded in and epoxy sealed to lock out flux, dust, and other contaminants. Solder lug/quick connect terminals can be used with connector. Housing and case of heat resistant resin meet UL94V-0 standard. Actual Size JWM Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 4
3 Series JW High Inrush 0 & 6 Amp Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement Accessories Indicators Tactiles Keylocks M MW L LW JW LW Ratings 5/50V AC Panel Seal 5/50V AC 5/50V AC Panel Seal 5/50V AC Poles SPST SPDT DPST DPDT Notes: DPST must have international ON-OFF symbols for VDE approval. JWLW available in DPST & DPDT only. Circuits ON NONE OFF ON NONE ON lack Rocker Cap with International ON-OFF Symbols in Horizontal Orientation DPST ON-NONE-OFF Circuit TYPICAL SWITCH ORDERING EXAMPLE R A arrier Types R No arrier With arrier Note: JWMW & JWLW combine with code R only. Cap Colors A lack Ivory C Red H Gray Note: JWMW & JWLW available with black or red caps only. Inscription Orientation No No Inscription Code Horizontal Vertical These are inscriptions for Single Throw models only. DESCRIPTION FOR TYPICAL ORDERING EXAMPLE JWLWRAA A A H A H Housing Colors lack Ivory Gray Note: JWMW & JWLW available with black only. lack Housing arrier Colors lack Ivory Gray IMPORTANT: Standard markings for JWM & JWL: TV Rating, UL, CSA & VDE. Standard marking for JWLW: culus. Specific models, ratings & ordering instructions for international approvals are noted on General Specifications page. 5/50V AC 4
4 High Inrush 0 & 6 Amp Rockers Series JW M Power Level 5/50V AC Panel Seal Power Level 5/50V AC L Pole SP SP DP DP R Power Level Model JWM JWMW JWL JWM JWMW JWL JWM JWMW JWL JWLW JWM JWMW JWL JWLW No arrier 5/50V AC RATINGS MW Rocker Position Connected Terminals Throw & Schematics Down Center Up Down Center Up Note: Terminal numbers are not actually on the switch. Actuator positions oriented with switch part number facing front. ON NONE OFF - OPEN OPEN SPST ON NONE ON - OPEN -a SPDT ON NONE OFF ON NONE ON No-barrier type has a flat flange which is an integral part of the switch. JWMW and JWLW panel seal devices have exterior seal of acrylonitrile butadiene rubber covering the flange. POLES & CIRCUITS - -b - -b OPEN OPEN DPST OPEN -a -a ARRIER TYPES & COLORS DPDT arrier type designates that either AT7 (for JWM) or AT8 (for JWL) is factory assembled. Dimensions for barriers are shown in the Accessories section. Flange/Housing Material: Polyamide Finish: Matte arrier Material: Polyamide Finish: Matte With arrier arrier Colors Available: Panel Seal Power Level 5/50V AC JWM JWL JWM JWL Cap Material: Polyphenelene Oxide Finish: Matte Cap Colors LW CAP COLORS a a () () () () A lack H Ivory Gray Available: A C H lack Ivory Red Gray Rocker cap is an integral part of the switch and not available separately. JWMW and JWLW available with black or red caps only. a b b Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 43
5 Series JW High Inrush 0 & 6 Amp Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement Accessories Indicators Tactiles Keylocks No Code DPST models without inscriptions do not have VDE approval. Material: Polyamide Finish: Matte No Inscription JWM & JWMW INSCRIPTIONS Inscription for Horizontal Mounting lack TERMINALS A H Ivory Inscription for Vertical Mounting The IEC symbols for On-Off are supplied with Single Throw models only. Orientation of inscription must be selected. Inscription Colors: lack ink on Ivory or Gray cap. White ink on lack or Red cap. Contact factory for other inscriptions. Colors Available: Solder Lug/Quick Connect.0 (.8mm) Panel Thickness Range Epoxy Seal Without arrier (JWM & JWMW):.039 ~.57 (.0mm ~ 4.0mm) With arrier (JWM):.04 ~.6 (0.6mm ~ 3.mm) Panel Thickness Range Without arrier (JWL & JWLW):.039 ~.57 (.0mm ~ 4.0mm) With arrier (JWL):.04 ~.6 (0.6mm ~ 3.mm) (0.6) R.04 (.6).063 Thk = (0.5).00 HOUSING JWMW and JWLW panel seal models available with black housing only. (.8).0 (0.65) R.06 JWMW Gray (3.).6 (7.5) Epoxy Seal (7.5) (.5) R JWL & JWLW.059 PANEL CUTOUTS JWM JWL (5.4).606 (0.5).807 Solder Lug/Quick Connect (4.75mm) (4.0).945 (9.5).6 JWLW (4.75) Thk = (0.8).03 (5.4).606 (0.5).807 (5.0).984 (30.7).09 44
6 High Inrush 0 & 6 Amp Rockers Series JW (9.6).77 (9.6).77 (9.6).77 (3.6).535 (8.0).709 (3.6).535 (.0).87 (3.6).535 (8.0).709 (.).874 TYPICAL SWITCH DIMENSIONS FOR JWM & JWMW (5.0) (6.4).646 (.0) (6.4).646 (3.0).8 (6.0).36 (7.).83 (7.0).76 (.5).846 (8.9).744 (.5).846 Single & Double Pole (7.5).95 Single & Double Pole (7.5).95 Single & Double Pole (7.5).95 (7.7) Typ.303 (.6) (7.7) Typ.303 (.6) (7.7) Typ.303 (.6) No arrier 0 Amp JWMRCA With arrier 0 Amp JWMCA-H Panel Seal No arrier 0 Amp Single pole double throw models do not have terminals a,, & b; single throw models do not have a & a. b a b a b a (6.).44 (5.4).606 (6.).44 (5.4).606 (6.).44 (5.4).606 a a a (7.0).063 (.8) Typ.0 (30.0).8 (.8) Typ.0 (9.6).65 (.8) Typ.0 JWMWRCA Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 45
7 Series JW High Inrush 0 & 6 Amp Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement Accessories Indicators Tactiles Keylocks No arrier 6 Amp With arrier 6 Amp TYPICAL SWITCH DIMENSIONS FOR JWL & JWLW (4.4).96 Single & Double Pole (9.8) Typ.386 (8.0).0 JWLCA-H Single pole double throw models do not have terminals a,, & b; single throw models do not have a & a. Panel Seal 6 Amp Inscription JWLWRAA (4.4).96 (4.4).96 (7.6).693 (7.6).693 (3.0).906 (7.).07 (7.6).693 (3.0).906 (7.0).063 (9.0).4 (0.) (0.).795 (.7).06 (7.9).3 Single & Double Pole (.0).079 (7.0).76 (8.5).3 (.4).843 (.3).839 (7.5).95 (7.5).95 (9.8) Typ.386 (8.0).0 JWLRCA Single pole double throw models do not have terminals a,, & b; single throw models do not have a & a. (4.0).945 (7.5).95 (0.8) Typ.03 (0.8) Typ.03 Double Pole Single Throw (0.8) Typ.03 (9.8).386 (8.0).0 b b a b a (0.0).787 (9.0).354 (0.5).807 a a (0.0).787 (9.0).354 (0.5).807 (9.0).354 (0.0).787 a a (3.0).60 (4.75) Typ (35.0).378 (4.75) Typ (4.75) Typ (37.3)
8 High Inrush 0 & 6 Amp Rockers Series JW (4.4).96 Notes (7.6).693 (.).874 (7.0).063 (8.6).339 (.6).0 OPTIONAL DUST COVER AT46 Dust Cover for JWL Rocker When installed, the Dust Cover protects the switch from an environment containing small particles and dust. The switch is operable with the Dust Cover in place. Materials: Lid: Clear Polyvinyl Chloride ase: lack Polyamide Recommended Panel Thickness:.03 ~.34 (0.8mm ~ 3.4mm) (33.0).99 Top Side ottom. The dust cover is not for use with JWLW.. The dust cover cannot be used with the barrier option. TYPICAL SWITCH DIMENSIONS FOR JWLW Double Pole Double Throw 6 (0.).795 (7.9).3 (.7).06 (.3).839 (7.5).95 (0.8) Typ.03 (9.8) Typ.386 (8.0).0 Recommended Temperature Range: 0 ~ +70 C (+4 F ~ +58 F) Loses pliability below 0 C (+3 F) (4.0).654 Lid b a Panel Seal 6 Amp No Inscription (9.0).354 (0.0).787 a (4.75) Typ (37.3).469 Assembly Instructions:. Insert bottom of switch through the base until the tabs lock into place.. Snap the switch into the panel. 3. Seat the lid into the grooves of the base. Switch JWLWRAA Groove Groove ase Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 47
9 Series JW High Inrush 0 & 6 Amp Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement Accessories Indicators Tactiles Keylocks PRECAUTIONS FOR HANDLING & STORAGE FOR JWMW/LW (PANEL SEAL TYPES) Operating Environment Do not install switch where heavy dust collection occurs. Dust build-up under rocker may affect switch actuation. Do not actuate switch if submerged in water or oil. Installation is not recommended on horizontal surface in an environment where frequent splashing of water may occur. In such an environment, a minimum 30 angle installation is advisable. If there is a possibility of freezing, install vertically so no moisture will be retained within switch housing. Panel Mounting efore snapping a switch into the panel, align the gasket evenly under bezel of the switch. When mounting into a panel, apply equal pressure to sides of bezel and insert parallel to panel. After mounting a switch, be sure there are no gaps between switch and panel. Lightly push into panel. After installing into panel, do not apply excessive force. After panel installation and wiring is completed, do not apply force horizontally or vertically from behind panel. Incorrect ehind the panel, cut area should be squared. If front of panel is painted, do not allow any paint to collect in corners of cutout to prevent level mounting. Avoid reinstalling a switch once it has been mounted in a panel. This may cause deterioration of panel sealability. Correct 30 Clean Edges 48
10 Notes 49
11 Series JWS Internationally Approved Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement Accessories Indicators Tactiles Keylocks General Specifications Electrical Capacity (Resistive Load) Power Level: 5/50V AC 5/50V AC (UL/CSA) 5A 5/50V AC (VDE) Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: 0 milliohms maximum 500 megohms 500V DC,000V AC minimum between contacts for minute minimum; 4,000V AC minimum between contacts & case for minute minimum 30,000 operations minimum 0,000 operations minimum Mechanical Life: Electrical Life: Nominal Operating Force: Single Pole 3.9N & Double Pole 5.39N Angle of Throw: 30 Materials & Finishes Rocker: Housing/Case: Movable Contactor: Movable Contacts: Stationary Contacts: End Terminals: Common Terminals: Lamp Terminals: Environmental Data Operating Temp Range: Installation Humidity: Vibration: Shock: Sealing: Soldering: Cleaning: Polyamide (UL94V-0) Polyamide (UL94V-0) Copper with silver plating Silver alloy Silver alloy rass with silver plating Copper with silver plating Phosphor bronze with tin plating (illuminated models only) 5 C through +70 C ( 3 F through +58 F) for nonilluminated models; 5 C through +50 C ( 3 F through + F) for illuminated models 90 ~ 95% humidity for C (04 F) 0 ~ 55Hz with peak-to-peak amplitude of.5mm traversing the frequency range & returning in 5 minutes; 3 right angled directions for hours 50G (490m/s ) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Dust resistant inner seal Manual Soldering: See Profile A in Supplement section. These devices are not process sealed. Hand cleaning locally using alcohol based solution. Standards & Certifications Flammability Standards: UL94V-0 for rocker & housing/case UL: File No. E4445 All JWS models recognized at 5/50V AC CSA: File No _0_000 All JWS models certified at 5/50V AC VDE: License No. 953 All JWS models approved at 5A 5/50V AC 50
12 Internationally Approved Rockers Series JWS Distinctive Characteristics Rocker caps and housing available in a variety of colors. Protective barrier available to prevent accidental actuation. Constructed for dust resistance with interior cover of polyamide between actuator and contact area. Easy, crisp actuation. Small size well suited for telecommunication, measuring, automation, and consumer applications. Terminals are molded in to lock out flux, dust, and other contaminants. Outer case of heat resistant resin meets UL94V-0 flammability standard. Actual Size Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 5
13 Series JWS Internationally Approved Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement Accessories Indicators Tactiles Keylocks JW S Circuit S Rating ON NONE OFF 5/50V AC 5/50V AC (UL/CSA) 5A 5/50V AC (VDE) Poles SPST Nonilluminated & Illuminated DPST Nonilluminated only DPST ON-NONE-OFF Circuit TYPICAL SWITCH ORDERING EXAMPLE R R arrier Types No arrier With arrier DESCRIPTION FOR TYPICAL ORDERING EXAMPLE lack Rocker Cap JWSRAA A Cap Colors A lack * Ivory C Red * For Nonilluminated only Housing Colors A lack * Ivory * For Nonilluminated only A No Code C D F Spot Illumination A Nonilluminated Red LED Amber LED Green LED arrier Color lack lack Housing/No arrier IMPORTANT: culus & VDE markings are standard on all models. Models & specific ratings are noted on General Specifications page. 5
14 Internationally Approved Rockers Series JWS RATING S Power Level 5/50V AC 5/50V AC (UL/CSA) 5A 5/50V AC (VDE) Pole Model Rocker Position Connected Terminals Throw & Schematics Down Center Up Down Center Up SP JWS ON NONE OFF -3 OPEN OPEN SPST DP JWS ON NONE OFF OPEN OPEN DPST R No-barrier type has a flat flange which is an integral part of the switch. POLES & CIRCUITS ARRIER TYPES & COLORS No arrier With arrier Material: Polyamide Finish: Matte (.) R.047 (0.65) R.06 (4.75) Thk = (0.5).00 Switch Cap Material: Polyamide Finish: Matte (6.4) (4.4).5.73 (3.5).8 Colors Available: arrier Material: Polyamide Finish: Matte arrier AT9 is factory assembled. Dimensions for barrier are shown in the Accessories section. arrier Color Available: CAP COLORS Note: Terminal numbers are actually on the switch. A lack INTERNAL CONNECTION 6 INTERNAL CONNECTION Rocker cap is an integral part of the switch and not available separately. * Ivory for nonilluminated models only. Cap Colors Available: A C A HOUSING lack TERMINALS Solder Lug/ (4.75mm) Quick Connect Switch assembly with connectors is not UL, CSA, C-UL, or VDE approved. lack * Ivory Red Ivory (for nonilluminated models only) (3.0).8 (.0).039 Thk = (0.5).00 (5.0).97 (.8).07 Lamp (spot illuminated models only) Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 53
15 Series JWS Internationally Approved Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement Accessories Indicators Tactiles Keylocks LED COLORS & SPECIFICATIONS FOR SPOT ILLUMINATED MODELS LEDs are supplied as an integral part of illuminated devices and are not available separately. LED polarity markings are on the bottom of the switch. The electrical specifications shown here are determined at a basic temperature of 5 C. If the source voltage exceeds the rated voltage, a ballast resistor is required. The resistor value can be calculated by using the formula in the Supplement section. JWSRCA Nonilluminated No arrier JWSRAA (.9).508 Nonilluminated No arrier (+) (-) Color Red Amber Green Maximum Forward Current I FM 30mA 0mA 30mA Typical Forward Current I F 0mA 0mA 0mA Forward Voltage V F.8V.0V.V Maximum Reverse Voltage V RM 5V 5V 5V Current Reduction Rate No Current Reduction Rate Within Above 5 C I F Specified Operating Temperature Ambient Temperature Range 5 C ~ +50 C PANEL CUTOUT & PANEL THICKNESS RANGES (9.).756 Panel Thickness Ranges: Without arrier:.030 ~.079 (0.75mm ~.0mm) With arrier:.04 ~.059 (0.6mm ~.5mm) TYPICAL SWITCH DIMENSIONS (0.).40 (0.).40 Single Pole 30 (.3).484 (.0).079 Double Pole 30 (.3).484 (.0).079 (5.3).09 (5.3).09 (6.0).630 (6.0).630 (5.6).0 (6.4).5 (6.4).5.00 (.)R Typ.047 (0.65)R Typ.06 (6.5).56 (9.0).748 (5.5).7 (4.75) Typ DPST models have IEC symbols for On-Off on the flange. (4.5).77 C (9.0).748 D 3 (.4).488 (.8).504 (8.5) (.4).488 (.8).504 (4.75) F (.0) (.0).87 54
16 Internationally Approved Rockers Series JWS (.).083 (.).083 (0.).40 (6.5).650 (0.).40 (6.5).650 (6.0).36 (0.).40 (0.).40 (6.0).36 (6.5).650 (9.5).768 (9.5).768 (7.0).76 (7.0).76 TYPICAL SWITCH DIMENSIONS (3.5).53 (3.5).53 (5.6).0 (6.4).5 (6.4).5 Single Pole.00 (6.5).56 (9.0).748 Double Pole (.)R Typ.047 (0.65)R Typ.06 (5.5).7 (4.75) Typ (4.5).77 (9.0).748 DPST models have IEC symbols for On-Off on the flange. 30 (.3).484 (9.5).768 (.0).079 (5.3).09 (7.0).76 (6.0).630 (3.5).53 (6.4).5 (5.0).97 (9.).36 (6.4).5 (5.0).97 (9.).36 Single Pole.00 (6.5) Typ.56 (9.0).748 (.5).059 (0.5) 0.0 Single Pole.00 (6.5) Typ.56 (9.0).748 (.5).059 (0.5) 0.0 (.8) Typ.07 (.8) Typ.07 3 (.4).488 (.8).504 (0.5).807 (8.5) (.4).488 (.8).504 (0.5) (.4).488 (.0).47 (.8) (.4).488 (.8).504 (0.5).807 (4.75).00 (4.75) (4.0).57 Nonilluminated With arrier (4.0).945 (.0).87 JWSA-A Nonilluminated With arrier (4.0).945 (.0).87 (.0).87 (4.75) JWSAA-A Spot Illuminated No arrier JWSRCAF Spot Illuminated With arrier (4.0).945 (.0).87 (4.0).57 JWSAAF-A Supplement Accessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Toggles 55
General Specifications
Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons General Specifications High Inrush 0 & 6 Amp Rockers Electrical Capacity (Resistive Load) Power Level: 0A @ 5/50V AC for
More informationGeneral Specifications
Series JWS Internationally pproved Rockers Touch Tilt Rockers Toggles Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators Tactiles Keylocks General Specifications Electrical
More informationGeneral Specifications
Series WT Environmentally Sealed General Specifications Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical Capacity
More informationDistinctive Characteristics
Distinctive Characteristics Full face or spot illumination with incandescent lamps or multi-element LEDs, with or without resistors. Short Body Pushbuttons Series YB Choice of super bright LEDs in white,
More informationDistinctive Characteristics
Distinctive Characteristics Carefully designed light diffusion and filtering system produce bright, full surface illumination with front panel relamping. Spot illumination available in single and bicolor
More informationWe Make It Easy! 3. All of our switches are shipped complete, just as ordered. No incomplete or partial deliveries of subcomponents and accessories
We Make It Easy! 1. We assemble the parts for you saves you time and money. Includes LEDs and accessories 2. Easy to order all options and accessories displayed in easy-to-follow ordering table. No complicated
More informationGeneral Specifications
Standard Size Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum
More informationDistinctive Characteristics
Distinctive Characteristics Full face or spot illumination with incandescent lamps or multi-element LEDs, with or without resistors. Choice of super bright LEDs in white, green, and blue as well as bright
More informationDistinctive Characteristics
Distinctive Characteristics Wide selection of illumination effects is achieved with single and bicolor, - or -element LEDs, in flat, beveled, or sculptured caps. LED colors include red, amber, green, white,
More informationGeneral Specifications
Series YB Short Body Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C
More informationGeneral Specifications
General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum (Applicable Range 0.1mA
More informationGeneral Specifications
General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum (Applicable Range 0.1mA
More informationDistinctive Characteristics
Standard Size Pushbuttons istinctive Characteristics Carefully designed light diffusion and filtering system produces bright, full surface illumination with front panel relamping. Spot illumination available
More informationGeneral Specifications
eneral Specifications Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated P Pushbuttons Rockers Electrical apacity (Resistive Load) Power Level
More informationYB2 Panel Seal. New Square Actuator Option. Series YB2. Contact No Thin Flush Mount Pushbuttons. 24mm Square Panel Seal Pushbuttons
Contact No. 182 YB2 Panel eal Thin Flush Mount Pushbuttons New quare Actuator Option 2011-01-26 www.nkk.com 1 General pecifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V
More informationDistinctive Characteristics
Distinctive Characteristics Full face and spot illumination available. Front panel relamping. Choice of super bright LEDs in white, green, and blue in addition to bright red, amber, and green LEDs. Compact
More informationDistinctive Characteristics
Distinctive Characteristics Various cap styles and colors to meet differing application needs. Bright, full face illumination to distinctively indicate status. Rear panel threaded mounting or snap-in mounter
More informationGeneral Specifications
Series UB Low Profile Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 5A @ 5/50V AC or 5A @ 0V C Logic Level (gold): 0.VA maximum @ 8V AC/C maximum (Applicable
More informationGeneral Specifications
Series UB Low Profile Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 5A @ 5/50V AC or 5A @ 0V C Logic Level (gold): 0.VA maximum @ 8V AC/C maximum (Applicable
More informationDistinctive Characteristics
Distinctive Characteristics ntirotation design, standard on noncylindrical levers, mates toggle and bushing; bottom of toggles has two flatted sides which fit into a complementary opening inside bushing.
More informationGeneral Specifications
Series M eneral Specifications Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical apacity (Resistive Load)
More informationGeneral Specifications
General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum (Applicable Range 0.1mA
More informationGeneral Specifications
Standard Size Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum
More informationDistinctive Characteristics
Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. Antistatic superstructure, consisting of the carbon impregnated bushing and
More informationGeneral Specifications
General Specifications Electrical Capacity (Resistive oad) Power evel (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C ogic evel (gold): 0.4VA maximum @ 28V AC/C maximum (Applicable Range 0.1mA ~ 0.1A
More informationDistinctive Characteristics
Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. ntistatic superstructure, consisting of the carbon impregnated bushing and the
More informationGeneral Specifications
Series E Light Touch Miniature Pushbuttons eneral Specifications Electrical apacity (Resistive Load) Power Level (silver): A @ 25V A for silver contacts Logic Level (gold): 0.4VA maximum @ 28V A/D maximum
More informationGeneral Specifications
Series D Light Touch Miniature Pushbuttons General Specifications Electrical apacity (Resistive Load) Logic Level: 0.VA maximum @ 8V A/D maximum (Applicable Range 0.mA ~ 0.A @ 0mV ~ 8V) Note: Find additional
More informationGeneral Specifications
Series UB Low Profile Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): A @ /0V AC or A @ 0V C Logic Level (gold): 0.VA maximum @ 8V AC/C maximum (Applicable
More informationGeneral Specifications
Slides Rotaries Programmable Illuminated P Pushbuttons Supplement ccessories Indicators eneral Specifications lectrical apacity Resistive Load: 0 @ 5V, @ 50V, or @ 0V Inductive Load: 5 @ 5V (P.. @.0) Other
More informationDistinctive Characteristics
Distinctive haracteristics arefully designed light diffusion and filtering system produces bright, full surface illumination with front panel relamping. Spot illumination available in single and bicolor
More informationGeneral Specifications
Series HB Subminiature Pushbuttons General Specifications Electrical apacity (Resistive Load) Power Level (silver): 0.1A maximum @ 30V A/ Other Ratings ontact Resistance: 50 milliohms maximum Insulation
More informationGeneral Specifications
Standard Size Pushbuttons General Specifications Electrical apacity (Resistive Load) Power Level (silver): 3A @ 125V A or 3A @ 250V A or 3A @ 30V Logic Level (gold): 0.4VA maximum @ 28V A/ maximum (Applicable
More informationGeneral Specifications
Series CK High Security Keylocks General Specifications Electrical Capacity (Resistive Load) Power Level: 3A @ 50V AC Other Ratings Contact Resistance: Insulation Resistance: Dielectric Strength: Mechanical
More informationGeneral Specifications
General Specifications Electrical Capacity (Resistive oad) Power evel (silver): A @ 25/250V AC or A @ 30V C ogic evel (gold): 0.VA maximum @ 28V AC/C maximum (Applicable Range 0.mA ~ 0.A @ 20mV ~ 28V)
More informationEmergency Stop Switch A165E. Ordering Information. Mounting Aperture of 16 mm
Emergency Stop Switch Mounting Aperture of 16 mm Modular construction, easy installation Positive opening mechanism with minimum contact separation of 3 mm in accordance with EN60947-5-1, Conforms to EN418
More informationDistinctive Characteristics
Distinctive Characteristics High insulating material for 6mm CKM models withstands over 5 kilovolts of electrostatic discharge, thus providing antistatic feature. Rugged, die cast housing 9mm CKL models
More informationGeneral Specifications
Series M Waterproof Miniature eneral Specifications Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical apacity (Resistive
More informationGeneral Specifications
Series FB & SB Momentary Pushbuttons General Specifications FB Series Electrical apacity (Resistive Load) Power Level: 500mA @ 125V A for silver Logic Level: 0.4VA max. @ 28V A/D max. for gold (Applicable
More informationSERIES SINGLE AND DOUBLE-POLE ROCKER SWITCHES
TO 1 (4) A 50 V AC PRODUCT FEATURES 100 million times proven switching principle High, fl exible design variety Excellent actuating characteristic Illuminated and non-illuminated variants ON REQUEST Other
More informationGeneral Specifications
General Specifications Electrical Capacity (Resistive oad) Power evel (silver): A @ 25/250V AC or A @ 30V C ogic evel (gold): 0.VA maximum @ 28V AC/C maximum (Applicable Range 0.mA ~ 0.A @ 20mV ~ 28V)
More informationGeneral Specifications
Series FB & SB Momentary Pushbuttons General Specifications FB Series Electrical apacity (Resistive Load) Power Level: 500mA @ 125V A for silver Logic Level: 0.4VA max. @ 28V A/D max. for gold (Applicable
More informationTYPICAL SWITCH ORDERING EXAMPLE TERMINALS
Series M TYPIL SWITH ORDERIN EXMPLE M0 S 0 POLES SMLL TOLES SMLL BUSHINS ONTT MTERILS & RTINS OPTIONL PS P OLORS SPDT DPDT SPT PDT * PDT DPT * -pole available on vertical models only. IRUITS ON NONE ON
More informationSERIES SINGLE AND DOUBLE-POLE ROCKER SWITCHES
TO 1 (4) A 50 V AC ROCKER SWITCHES PRODUCT FEATURES 100 million times proven switching principle High, fl exible design variety Excellent actuating characteristic Illuminated and non-illuminated variants
More informationC&K DA Series Miniature Single Pole Rocker Switches
Features/Benefits Typical Applications Nice actuator styling with Small appliances multiple options Computers and peripherals Guards to prevent accidental Medical instrumentation actuation Momentary and
More informationSWITCHES FOR TOUGH ENVIRONMENTS
SWITCHES FO TOUGH ENVIONMENTS Industrial & IP-ated Switches NKK Authorized Distributor Contact us for quotes or additional product info: 1.800.590.4055 http://hughespeters.com/contact/ Industrial & IP-ated
More informationSERIES SINGLE AND DOUBLE-POLE ROCKER SWITCHES
TO 0 (4) A 50 V AC PRODUCT FEATURES 100 million times proven switching principle mechanical life endurance up to 1 million switching cycles Wide variety Variants with IP 67 or dust protection insert Two
More informationContents Pushbuttons. AB Series...C6 0.4VA Logic Level; Process Sealed Straight, Right Angle, & Vertical PC
ontents Pushbuttons B Series... 0.V Logic Level; Process Sealed Straight, Right ngle, & Vertical P BB Series... ntistatic; 0.V Logic Level; Process Sealed Straight, Right ngle, & Vertical P DB Series...
More informationSeries 300. Miniature Rocker & Paddle Switches
Series 00 SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 0,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. inital @ -VDC. 00mA for both
More informationA165-E. Ordering Information. Emergency Stop Switch. For Panel Cutout of 16 mm
Emergency Stop Switch For Panel Cutout of 16 mm H Modular construction, easy installation H Positive opening mechanism with a minimum contact separation of 3 mm in accordance with EN6947-5-1, for NC contacts
More informationSeries R19. Power Rocker Switches MARK OPTIONS COLOR OPTIONS TERMINATION OPTIONS HOW TO ORDER
CONTACT RATING: 6A 250VAC 10A 125VAC. ELECTRICAL LIFE: 10,000 Operations. MECHANICAL LIFE: 50,000 Operations. CONTACT RESISTANCE: 1,000M-ohms. DIELECTRIC STRENGTHS: >1,500
More informationSERIES SINGLE AND DOUBLE-POLE PUSHBUTTON SWITCHES
PRODUCT FEATURES Illuminated and non-illuminated pushbutton switch Proven jump contact switching system (double interrupting) Opening and closing speed independent of the actuating speed Product-dependent
More informationOrdering Information. Text PCB Power Relay G5LE
A Cubic, Single-pole 10-A Power Relay Single-pole 10A 35VDC, 0.8mm contact gap: G5LE-G Single-pole 16A 250VAC: G5LE-E ROHS compliant. Sub-miniature sugar cube relay with universal terminal footprint. Conforms
More informationDM Series Miniature 2 Pole Power Rocker Switches
Miniature 2 Pole Power Switches Features/Benefits AMPS to AMPS Quick connect terminals Double pole in miniature size Recessed bracket available prevents accidental actuation RoHS compliant Typical Applications
More informationSealed Vehicle Rocker (SVR)
Sealed Vehicle Rocker (SVR) SEALED VEHICLE ROCKER SVR SVR Series TABLE OF CONTENTS Description How to Order - Descriptions - Dimensions 6- Icons Page Back DESCRIPTION Eaton is excited to present the Sealed
More informationOrdering Information. Text PCB Power Relay G5RL. Low-profile Relay with Various Models. Power Relays
Low-profile Relay with Various Models Low profile:.7 mm in height Clearance and creepage distance Between coil and contacts: 8 mm/8 mm Between contacts of the same polarity: 3 mm/4 mm Models with AC coil
More informationC&K ET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space Typical Applications Telecommunications Instrumentation
More information2600 SERIES ILLUMINATED AND NON-ILLUMINATED ROCKER SWITCHES Overview
Overview 6 SERIES Electrical functions Frame type 1 ON - OFF 4 ON ON ON MOM - ON 6 ON - ON 7 MOM OFF MOM 8 ON OFF MOM 9 ON OFF ON double pole only LH LP Plain With protection guard Number of poles Special
More informationC&K 7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical Applications Telecommunications
More information2.4 Dual Motion Safety Switch /8007 EURO SR /8005 Euro Full Size /8065 ESPORT
Rockers NGR. Introduction Product Selection Guide..................................... NGR Product Description....................................... Number Selection..................................
More informationø12 A2 Series Miniature Control Units
ø2 A2 Series Miniature Control Short 22-mm-long body miniature control unit series with bright LED illumination face and snap-action switching. Degree of protection: IP40 and IP5 (IEC 0529) All series
More informationSwitches. SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY 115VAC, 28VDC)
SWITCH SELECTION GUIDE Toggle Switches SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive @ 115VAC, 28VDC) T1 2 or 3 Position, Momentary, 8A MIL-PRF-83731 15/32" or 1/4" dia.
More informationProduct Range. Rocker & Paddle Switches. Rocker & Paddle Switches. Rocker & Paddle Switches
Product Range for Panel Mounting: F, TRD and Gemini Series for PCB Mounting: Gemini Series Main features: Sealed or unsealed versions Various switch functions Gold or silver contacts LED illumination available
More informationSPECIFICATIONS: MATERIALS: If your preferred product configuration is not shown, please contact our sales representative for custom design.
SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 50,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. initial @2-4VDC 00mA for both silver
More informationModel Number Structure
Power Relay G7J Electromechanical Relays A High-capacity, High-dielectric-strength, Multi-pole Relay Used Like a Contactor Miniature hinge for maximum switching power for motor loads as well as resistive
More informationD2SW-AQ. Sealed Subminiature Basic Switch Conforming to IP67 (Excluding the terminals on terminal models) Model Number Legend
Sealed Subminiature Basic Switch Conforming to IP67 (Excluding the terminals on terminal ) Use of epoxy resin assures stable sealing, making this switch ideal for places subject to water spray or excessive
More informationø10 A1 Series Miniature Control Units
A1 ø10 A1 Series Miniature Control Short 22-mm-long body miniature control unit series with LED illumination face and snap-action switching. Bright and clear LED illumination. All series have terminals
More informationSecurity Switches. Anti Vandal, Pushbutton. Specifications. Specifications S76 S77. Features.748 (19mm) bushing diameter
Anti Vandal, Pushbutton S76.287 (7.3) c: Screw (Assembled).098 (2.5) Typ.142 (3.6) Type Circuitry Action Actuator g 54 377 SPST NO OFF (ON) Stainless Steel, Flat S76b 54 378 SPST NO OFF (ON) Stainless
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Features/Benefits Multi-pole and multi-position Positive detent Shorting
More information1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationonlinecomponents.com
eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available Typical Applications
More informationMounting type Contact form PCB terminals Screw terminals Quick-connect terminals
Power Relay A High-capacity, High-dielectric-strength, Multi-pole Relay Used Like a Contactor Miniature hinge for maximum switching power for motor loads as well as resistive and inductive loads. No contact
More informationANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
More informationCIT SWITCHTM ANT SPECIFICATIONS
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
More informationC&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationRockers Product Selection Guide
s Product Selection Guide Series 7000 E ET T 9000 DA D Switch Type Subminiature Subminiature & Lever andle Poles/Throws,, 3PDT, 4PDT,, 3PDT,, DPST, Max. Current 5 Amps 7.5 Amps 3 Amps 3 Amps 4 Amps Washable
More informationBright illumination face and snap-action switching.
ø A2 Series ø10 A1 Series ø8 A8 Series A2 Series A1 Series A8 Series Bright illumination face and snap-action switching. See website for details on approvals and standards. Hole Size Model Function Degree
More information7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
More informationKSB & KSF Series Low-profile Tact Switch
KS & KSF Series Low-profile Tact Switch Features/enefits Low profile Protected against flux KS without top sealing KSF with top sealing RoHS compliant and compatible Typical Applications Low profile keyboards
More informationø8 A8 Series Miniature Control Units
A8 ø8 A8 Series Miniature Control Short 22-mm-long body miniature control unit series with LED illumination face and snap-action switching. Bright and clear LED illumination. All series have terminals
More informationLighted Pushbutton Switch
Lighted Pushbutton Switch General Purpose and Micro-Voltage/Current Load Switch Requires only 22 mm mounting depth All LEDs, lamps, legends and pushbutton units replaceable without tools Oil-resistant
More informationType List. Standard Type. High Power Type. Designation (provided with) Terminal style Contact form Contact gap
Features 8A/1 miniature PCB Power Relay. Large contact gap : 2mm/. High dielectric strength and comply with IEC 16950. Epoxy seal type and sealed flux free are both available. Design for UPS and power
More informationD2SW-P. Sealed Subminiature Basic Switch. Ordering Information D2SW-P
Sealed Subminiature Basic Switch Sealed Basic Switch with Simplified Construction, Mounting Compatible with SS and D2SW Series. Sealing by using rubber packing means the switch can be used in dust-proof
More informationDM Series Miniature Illuminated Power Rocker Switches
Miniature Illuminated Power Switches Features/Benefits AMPS to AMPS Illuminated LED Positive detent RoHS compliant Typical Applications Instrumentation Industrial Office machines UL 658-1 Specifications
More informationMINIATURE SWITCHES. Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action)
Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action) MINIATURE SWITCHES PS SERIES 5 AMP. (S.P.) 1 AMP (D.P.) 0.4 VA DIRECT PANEL MOUNT ONE POLE TWO POLE Basic P/N Terminal
More informationonlinecomponents.com
McGILL SWITCHES Contents Introduction......................................................................... 213 McGill Rocker Switches................................................................
More informationSubminiature Basic Switch
Subminiature Basic Switch Subminiature Basic Switch Offers Long Life and High Reliability A design that combines simplicity and stability by the use of two split springs ensures a long durability of 30,000,000
More informationC&K 7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical Applications Telecommunications Instrumentation
More informationAC 250V AC 250V AC 250V AC 250V DC 110V DC 110V DC 110V DC 110V Max. Allowable Current 15A 10A 10A 10A
Main Feature 1. 1 Pole to 4-Poles versions available with switching current at 15A (1 Pole) and 10A (2-4 Poles). 2. Printed Circuit Board Terminal, Plug-in Terminal and Flanged Case are designed for easy
More information3.2. Pushbuttons. For Immediate Delivery or Tech Support call KMParts.com at (866) Contents
. Pushbuttons Product Description Eaton offers a wide range of pushbutton switches for standard industry applications such as appliances, electronics, medical and test instrumentation, office equipment
More informationType List. Standard Type. High Power Type
Features 8A/1 miniature PCB Power Relay. Large contact gap : 2mm/. High dielectric strength and comply with IEC 16950. Epoxy seal type and sealed flux free are both available. Design for UPS and power
More information7000 SERIES ROCKER AND PADDLE SWITCHES Overview
Overview 7 SERIES Number of poles Terminals 3 Single pole 4 Double pole onsult factory for three and four pole models. Blank W WW Y } Y4 } Y6 } Y7 } Z Solder lugs or straight P depending on model Right
More information7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
More informationC&K 8020 Series Snap-acting Momentary Pushbutton Switches
Snap-acting Momentary Switches Models Available Features/enefits Positive tactile feel Multi-positions available Wide variety of termination options Typical Applications Instrumentation Computer peripherals
More informationMINIATURE SWITCHES. Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action)
Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action) MINIATURE SWITCHES PS SERIES 5 AMP. (S.P.) 1 AMP (D.P.) 0.4 VA DIRECT PANEL MOUNT Basic P/N Terminal Type Poles Cap
More informationE Series Sealed Miniature Rocker and Lever Handle Switches
Sealed Miniature and Lever Handle Switches Features/Benefits Sealed against solder and cleaning process contaminants ESD Resistance all actuator options, case & bushing UL 94V-0 RoHS compliant Typical
More informationD2VW. Sealed Miniature Basic Switch. Ordering Information Model Number Legend D2VW- -
Sealed Miniature Basic Switch D2VW Sealed Miniature Basic Switch Conforms to IP67 (Molded Lead Wire Type Only) Use of epoxy resin assures stable sealing, making this switch ideal for places subject to
More informationDistributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. C&K ET Series Sealed Subminiature Switches Features/Benefits Sealed against
More information7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant Typical Applications Telecommunications
More informationType Contact form Enclosure ratings Model Standard SPST-NO (Class A) Flux protection G5LA-1A Sealed
PCB Relay G5LA A Cubic, Single-pole 1A Power Relay Economical cube relay with universal terminal footprint Conforms to VDE435, CQC UL recognized/ CSA certified. High switching power: 1A @ 5VAC Withstands
More information