Distinctive Characteristics

Size: px

Start display at page:

Download "Distinctive Characteristics"

Marshall Robertson
5 years ago
Views:

1 Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. Antistatic superstructure, consisting of the carbon impregnated bushing and the support bracket, prevents static discharge to the contacts. Static electricity from an operator's touch travels from actuator through the bushing and bracket to the PC board. Locking lever mechanism offered as a toggle option. Smooth, mm diameter bushing simplifies panel layout. Optional threaded, mm diameter bushing for panel seal mounting meets IP of IEC9 specifications (similar to NEMA & ). Totally sealed body construction prevents contact contamination and allows time- and money-saving soldering and washing. Ultrasonically welded terminals lock out flux and other contaminants. Award-winning STC contact mechanism with benefits unavailable in conventional mechanisms: smoother, positive detent actuation, increased contact stability and unparalleled logic-level reliability. (Additional STC details in Terms & Acronyms; see page Z.).00" x.00" terminal spacing conforms to standard PC board grids. Actual Size

2 General Specifications Electrical Capacity (Resistive Load) Logic Level: 0.VA 8V AC/DC maximum (Applicable Range 0.mA ~ 0mV ~ 8V) Note: See Supplement Index (page Z) to find explanation of operating range. Other Ratings Contact Resistance: 0 milliohms maximum Insulation Resistance: 00 megohms 00V DC Dielectric Strength: 00V AC minimum for minute minimum Mechanical Life: 00,000 operations minimum for On-None-On & On-Off-On 0,000 operations minimum for other circuits 0,000 operations minimum for locking lever models Electrical Life: 0,000 operations minimum Nominal Operating Force: Toggles A, A, E & K w/long Paddle: 0 grams (momentary); 0 grams (maintained) Toggles J & H & K w/short Paddle: 78 grams (momentary); 88 grams (maintained) Toggle L: 0 grams Contact Timing: Nonshorting Angle of Throw: Materials & Finishes Toggle: Bushing: Gasket: Case Housing: Support Bracket: Movable Contact: Stationary Contacts: Terminals: Environmental Data Operating Temp Range: Humidity: Vibration: Shock: Nickel plated brass Carbon blended polyamide; nickel plated zinc alloy for locking levers & threaded bushing Nitrile butadiene rubber Glass fiber reinforced polyamide Tin plated phosphor bronze Phosphor bronze with gold plating Phosphor bronze or brass with gold plating Phosphor bronze with gold plating -0 C through +8 C (- F through +8 F) 90 ~ 9% humidity for 9 0 C (0 F) 0 ~ Hz with peak-to-peak amplitude of.mm traversing the frequency range & returning in minute; right angled directions for hours 0G (90m/s ) acceleration (tested in right angled directions, with shocks in each direction) Installation Mounting Torque:.0 ~.Nm (. ~.98 lb in) for A actuator with threaded bushing only Soldering Time & Temperature: 0 C or 70 C Process Seal: See Supplement Index (page Z) for specific processing data. Standards & Certifications Flammability Standards: UL Recognition or CSA Certification: UL9V-0 available The B Series toggles have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy.

TYPICAL SWITCH ORDERING EXAMPLE B A B POLES SPDT DPDT CIRCUITS ON NONE ON ON OFF ON ON NONE (ON) *R (ON) NONE ON 8 (ON) OFF (ON) 9 ON OFF (ON) *S (ON) OFF ON ( ) = Momentary *Reverse circuits R & S

3 TYPICAL SWITCH ORDERING EXAMPLE B A B POLES SPDT DPDT CIRCUITS ON NONE ON ON OFF ON ON NONE (ON) *R (ON) NONE ON 8 (ON) OFF (ON) 9 ON OFF (ON) *S (ON) OFF ON ( ) = Momentary *Reverse circuits R & S available w/right angle & vertical only A A J E H K L PC TERMINALS P Straight * B Straight with Bracket * H Right Angle with Bracket *V Vertical with Bracket W Straight Long * Bracketed models are ESD protected. TOGGLES.9" Bat." Bat with Panel Seal Threaded Bushing (Straight PC only).8" Bat.9" Flatted.8" Flatted Snap Top for A or B Paddle Locking Lever (with Circuits & only) G J A B OPTIONAL CAPS.9" Bat Lever Cap.8" Bat Lever Cap PADDLES Short Paddle for K Toggle Long Paddle for K Toggle DESCRIPTION FOR TYPICAL ORDERING EXAMPLE.9" Toggle BAB CAP PADDLE COLORS COLORS A Black A B White B C Red C --- Yellow E --- Green F --- Blue G --- Gray H Straight PC Terminals with Bracket SPDT ON-NONE-ON Circuit

4 Pole Model POLES & CIRCUITS Toggle Position ( ) = Momentary Connected Terminals Throw & Schematics Up Center Down Up Center Down Note: Terminal numbers are not actually on the switch. B ON NONE ON B ON OFF ON B ON NONE (ON) SP BR (ON) NONE ON - OPEN - B8 (ON) OFF (ON) B9 ON OFF (ON) BS (ON) OFF ON SPDT (COM) B ON NONE ON B ON OFF ON B ON NONE (ON) DP BR (ON) NONE ON - - OPEN - - B8 (ON) OFF (ON) B9 ON OFF (ON) BS (ON) OFF ON DPDT (COM) TOGGLES Standard Material & Finish: Brass with Bright Nickel A.9" Bat A." Bat with Panel Seal J E Threaded Bushing.8" Bat.9" Flatted (0.0) (.).8.0 (0.0).9 (.).0.0 H.8" Flatted K Snap Top for Paddles L Locking Lever (.).8 (.).0 (.).0 (.0).97 (.).098 (.).9 (.). (.9). (.8).8 (.) Dia.77 (.) Dia.0

5 PC TERMINALS Use of a support bracket or placement of the round bushing in a panel cutout is recommended to increase PCB mounting stability. P B Straight Straight with Bracket Right Angle with Bracket H.00 (.) Typ. (0.).00.0 (.)..00 (0.).0 (0.) Typ V Vertical with Bracket (0.) Typ (0.).0 W Straight Long (8.9).7.00 OPTIONAL CAPS G AT00.9" Bat Lever Cap Material: PVC Colors Available: A, B, C (.0). (.0) Dia.8 (0.0).9 J AT0.8" Bat Lever Cap Material: PVC Colors Available: A, B, C (7.0).7 (.0) Dia.8 (.).8 PADDLES A AT7 Short Paddle Material: Polyamide Colors Available: A, B, C, E, F, G, H (0.).0 (.).09 (.).8 (.0).97 (9.).70 B AT8 Long Paddle Material: Polyamide Colors Available: A, B, C, E, F, G, H (.).9 (.).09 (.0) Dia.97 (.).7 (.).9 Color Codes: A B C E F G H Black White Red Yellow Green Blue Gray

TYPICAL SWITCH DIMENSIONS Straight PC..0 (.) (0.).8.00.00 (.8) (0.0) (.) (.).8.9.. (.0).09. (.0).09.00.0 BAP Straight PC BAP...0 (.).8 (0.0).9 (0.8).0 (.)..00 (.)...00.0 Straight PC Bracket..0.0 (.0).09 (0.

6 TYPICAL SWITCH DIMENSIONS Straight PC..0 (.) (0.) (.8) (0.0) (.) (.) (.0).09. (.0) BAP Straight PC BAP...0 (.).8 (0.0).9 (0.8).0 (.)..00 (.) Straight PC Bracket..0.0 (.0).09 (0.) (.0) (0.) (0.0) (.) (.)..9.. (.0).09 (.) (.).00 BAB Straight PC Bracket..0.0 (0.)..00 BAB (.0)...0 (0.0).9 (0.8).0 (.)..00 (.)..0 Right Angle PC BAH..0.0 (0.0).9.0 (.9). (.). (.).. (7.)

TYPICAL SWITCH DIMENSIONS Right Angle PC..0 (.). (.).7..00 (.).00 BAH..0 (0.0).9.0 (.). (.).00 (0.).00.00.0 Vertical PC BAV. (.)..0 (.0).09 (.).7.0.0 (0.).00 (.)..00 (0.0).9 (8.9).7 (.0).09. (.0).09.00.0 C (.

7 TYPICAL SWITCH DIMENSIONS Right Angle PC..0 (.). (.) (.).00 BAH..0 (0.0).9.0 (.). (.).00 (0.) Vertical PC BAV. (.)..0 (.0).09 (.) (0.).00 (.)..00 (0.0).9 (8.9).7 (.0).09. (.0) C (.) L.00 Vertical PC BAV (0.0).9.0 (8.9).7 (.0).09 (.).7 (0.) (.) Locking Lever Straight PC Bracket (.0). (.) Dia (.) Dia (.0).09. (.8).8 (.). (.).9 (.).7 (.).0 (0.8).0 (0.).00 (.). (.0).09 (.) (.).00 BLB Locking Lever Straight PC Bracket. (.) Dia (.) Dia BLB (.8). (8.8).8 (.8).8 (.). (.).9 (.).7 (.).0 (0.8).0 (0.).00 (.)

8 TYPICAL SWITCH DIMENSIONS Threaded Bushing Straight PC Panel Seal (.8).89 (.8).8.0 M P0.7. (.) (0.8).7.0 (.).9.00 (.).. (.0).09 (.0) BAP Threaded Bushing Straight PC Panel Seal (.8) M P0.7. (.) (0.8).7.0 (.).9.00 (.) BAP STANDARD HARDWARE & PANEL CUTOUT ATM Metric Hex Nut AT0 Gasket Material: Brass, nickel plated /-0 Thd or M P0.7. Material: Nitrile butadiene rubber (.9).9 (.9).7 (.) (8.)..9 (.0).97 (.0). (9.0). (.).09 (.).0 Maximum Panel Thickness with Standard Hardware:. mm (.087")

Distinctive Characteristics

Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. ntistatic superstructure, consisting of the carbon impregnated bushing and the