8060 Series Alternate Action and Momentary Pushbutton Switches
|
|
|
- Beryl Burns
- 6 years ago
- Views:
Transcription
1 lternate ction and Momentary Switches Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available Typical pplications Instrumentation Computers and peripherals Telecommunications and networking equipment Models vailable Specifications CONTCT RTING: Q contact material: V C or 28 V DC; V C. See page -59 for additional ratings. ELECTRICL LIFE: 50,000 make-and-break cycles at full load. CONTCT RESISTNCE: Below 20 mω typ. 2-4 V DC, 100 m, for both silver and gold plated contacts. INSULTION RESISTNCE: 10 9 Ω min. DIELECTRIC STRENGTH: 1,000 Vrms sea level. OPERTING TEMPERTURE: 30ºC to 65ºC SOLDERBILITY: Per MIL-STD-202F method 208D, or EI RS-186E method 9 (1 hour steam aging). CP INSTLLTION FORCE: 10 lbs. maximum permissible. NOTE: ny models supplied with P, R, S, Q, B or G contact material are RoHS compliant. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switches, consult Customer Service Center. Materials CSE: Glass filled nylon 6/6 or diallyl phthalate (DP), flame retardant (UL 94V-0). PLUNGER: S, S1, S2 Options: Glass filled nylon or glass filled polyester (PBT) (UL 94V-0). L, L1 Options: Brass, nickel plated. CP & FRME: Nylon, black standard. BUSHING: Brass or zinc, nickel plated. HOUSING: Stainless steel. SWITCH SUPPORT: Brass or steel, matte-tin plated. END CONTCTS: Q contact material: Coin silver, silver plated. See page -59 for additional contact materials. CENTER CONTCT & LL TERMINLS: Q contact material: Copper alloy, silver plated. See page -59 for additional contact materials. TERMINL SEL: Epoxy. Refer to soldering and cleaning in Technical Data Chapter. HRDWRE: Nut & Locking Ring: Brass, nickel plated; Lockwasher: Steel, nickel plated. Build--Switch To order, simply select desired option from each category and place in the appropriate box. vailable options are shown and described on pages -53 thru -61. For additional options not shown in catalog, consult Customer Service Center. ll models have epoxy terminal seal and are compatible with all bottom-wash PCB cleaning methods. Switch Function 8161 On-On 8168 On-Mom On-On ctuator or Plunger S.710 high plunger with.375 dia. cap J80 Snap-in J81 Snap-in with frame J82 Snap-in with frame for LED J86 Snap-in with frame & LED L.740 high plunger with.395 dia. cap L1.740 high plunger with.590 dia. cap S1.615 high plunger with.200 dia. cap S2.710 high plunger with.310 dia. cap Bushing H.300 high, flat, hi torque H9.300 high, flat, hi torque NONE No bushing choice required Y3 7.6mm, keyway Terminations Right angle, PC thru-hole V2 Vertical right angle, PC thru-hole C PC Thru-hole Z Solder lug 3 Right angle, snap-in, PC thru-hole V3 Vertical right angle, snap-in, PC thru-hole V3.460 high, V-bracket V4.630 high, V-bracket V6.460 high, V-bracket V high, snap-in V-bracket V high, snap-in V-bracket W.750 long, wire wrap Z3 Quick connect Contact Material B Gold P Gold, matte-tin Q Silver S Silver, matte-tin G Gold over silver R Gold over silver, matte-tin Seal E Epoxy I Epoxy potted base Cap Color 2 Black 1 White 3 Red 4 Orange 5 Yellow 9 Gray Frame Color 2 Black LED Color 3 Red NONE Models without LED -52
2 lternate ction and Momentary Switches SWITCH FUNCTION NO. POLES SP MODEL NO SWITCH FUNCTION POS. 1 POS. 2 C&K marking this side ON ON ON MOM. CONNECTED TERMINLS POS. 1 POS. 2 C&K marking this side SCHEMTIC Part number shown: 8161SHZQE Terminal Nos. For Reference Only DP 8261 ON ON 2-3, ,5-4 Part number shown: 8261SHZQE MOM. = Momentary ll models Terminal Nos. For Reference Only with all options when ordered with G or Q contact material. CTUTOR SNP-IN FRONT MOUNT CTUTOR OR PLUNGER CP COLOR J80 SNP-IN PNEL MOUNTING CP COLOR * 2 BLCK 1 WHITE 3 RED 4 ORNGE 5 YELLOW 9 GRY Cap Finish: matte. Other colors available, consult Customer Service Center. vailable with C, W, Z or Z3 terminations. NOTE: Caps & frames available separately, see pages -60 and -61. J81 SNP-IN WITH BLCK FRME *Increase this dimension to.620/.625 (15,75/15,88) for.091/.125 (2,41/2,18) thick panels. PNEL MOUNTING * *Increase this dimension to.620/.625 (15,75/15,88) for.091/.125 (2,41/2,18) thick panels. Third ngle -53
3 8060 Series lternate ction and Momentary Switches CTUTOR SNP-IN FRONT MOUNT J82 SNP-IN WITH BLCK FRME FOR LED CTUTOR OR PLUNGER CP COLOR vailable with C, W, Z or Z3 terminations. LED not included. For LED information, see page -61. NOTE: Caps & frames available separately, see pages -60 and -61. Other colors available, consult Customer Service Center. 2 BLCK 1 WHITE 3 RED CP COLOR 4 ORNGE 5 YELLOW 9 GRY CTUTOR SNP-IN FRONT MOUNT CTUTOR OR PLUNGER CP COLOR LED COLOR J86 SNP-IN WITH BLCK FRME ND LED PNEL MOUNTING * 8161J86ZQE223 * Increase this dimension to.620/.625 (15,75/15,88) for.091/.125 (2,31/3,18) thick panels. vailable with C, W, Z or Z3 terminations and models only. NOTE: Caps & frames available separately, see pages -60 and -61. Other colors available, consult Customer Service Center. 2 BLCK 1 WHITE 3 RED CP COLOR 4 ORNGE 5 YELLOW 9 GRY LED COLOR 3 RED For LED information, see page -61. Third ngle -54
4 S PLUNGER WITH CP P/N Series lternate ction and Momentary Switches PLUNGER CTUTOR OR PLUNGER S1 PLUNGER WITH CP P/N 7089 CP COLOR S2 PLUNGER WITH CP P/N 8018 L PLUNGER WITH CP P/N 8941 L1 PLUNGER WITH CP P/N BLCK 1 WHITE 3 RED CP COLOR 4 ORNGE 5 YELLOW 9 GRY Cap Finish: gloss. Cap supplied not installed. Other colors available, consult Customer Service Center. NOTE: When selecting plunger and cap option, bushing selection must also be made, see below. BUSHING H.300 HIGH THREDED, FLT H9.300 HIGH UNTHREDED, FLT NONE NO BUSHING CHOICE REQUIRED (JXX CTUTORS) Y3 7.6mm THREDED, KEYWY 1/4±40 UNS-2 H bushing standard with C, W, Z or Z3 terminations. H9 bushing standard with, 3, V2, V3, or V3-V31 terminations. Withstands 12 in./lbs. of torque with no distortion. Withstands 12 in./lbs. of torque with no distortion. NOTE: When selecting bushing option, plunger selection must also be made, see above. No bushing option choice required when any JXX actuator option is selected. NOTE. Two mounting nuts, locking ring and lockwasher supplied standard with threaded bushings. Optional mounting nut and locking ring styles and finishes available, see section Technical Data and dditional Hardware. -55 Third ngle
5 lternate ction and Momentary Switches C PC THRU-HOLE TERMINTIONS Z SOLDER LUG and and Not available with P, S or R contact material. Z3 QUICK CONNECT W WIRE WRP.750 (19,05) and Not available with P, S or R contact material. Mating quick connector available; order part number , page -61. and RIGHT NGLE, PC THRU- HOLE.130 (3,3).138 (3,51) 8161SH9BE2 SECTION - 3 RIGHT NGLE, SNP-IN, PC THRU-HOLE Terminal bend radii and lead-in manufacturing option. NOTE: PC pattern must clear switch support leg. Third ngle -56
6 lternate ction and Momentary Switches RIGHT NGLE, PC THRU-HOLE TERMINTIONS SECTION SH9BE2 3 RIGHT NGLE, SNP-IN, PC THRU-HOLE Terminal bend radii and lead-in manufacturing option. V2 VERTICL RIGHT NGLE, PC THRU-HOLE,.150 PITCH 8161SH9V2BE2 V3 VERTICL RIGHT NGLE, SNP-IN, PC THRU-HOLE,.150 PITCH Terminal bend radii and lead-in manufacturing option. Third ngle -57
7 lternate ction and Momentary Switches TERMINTIONS V2 VERTICL RIGHT NGLE, PC THRU-HOLE,.150 PITCH 8261SH9V2BE2 SECTION - V3 VERTICL RIGHT NGLE, SNP-IN, PC THRU-HOLE,.150 PITCH Terminal bend radii and lead-in manufacturing option. V6 VERTICL MOUNT, V-BRCKET V21 VERTICL MOUNT, V-BRCKET, SNP-IN 8161SH9 BE2 DIM V (14,10) V6.460 (11,68) V6 VERTICL MOUNT, V-BRCKET V21 VERTICL MOUNT, V-BRCKET, SNP-IN DIM 8261SH9 BE2 V (14,10) V6.460 (11,68) Third ngle -58
8 lternate ction and Momentary Switches V3, V4 VERTICL MOUNT, V-BRCKET V31 VERTICL MOUNT, V-BRCKET, SNP-IN TERMINTIONS 8161SH9 BE2 DIM V3, V (11,68) V4.630 (16,00) V3, V4 VERTICL MOUNT, V-BRCKET V31 VERTICL MOUNT, V-BRCKET, SNP-IN 8261SH9 BE2 SNP-IN DIM V3, V (11,68) V4.630 (16,00) CONTCT MTERIL CONTCT MTERIL TERMINL PLTING RTINGS B P GOLD 1 GOLD 1 MTTE-TIN 6 LOW LEVEL/DRY CIRCUIT 0.4 V 20 V C OR DC MX. Q S SILVER 4,5 SILVER 5 MTTE-TIN 6 POWER V C OR 28 V DC; V C. G R GOLD OVER SILVER 2,3 GOLD 3 MTTE-TIN 6 LOW LEVEL/DRY CIRCUIT OR POWER 0.4 V 20 V C OR DC MX. OR V C OR 28 V DC; V C. * Note: See Technical Data section of this catalog for RoHS compliant and compatible definitions and specifications. 1 CONTCTS & TERMINLS: Copper alloy, with gold plate over nickel plate. 2 END CONTCTS: Coin silver, with gold plate over nickel plate. ll models contact material. with all options when ordered with S, R, G, or Q 3 CENTER CONTCTS & LL TERMINLS: Copper alloy, with gold plate over nickel plate. 4 END CONTCTS: Coin silver, silver plated. B contact material standard with all terminations except C, Z & Z3. Q contact material standard with C, Z & Z3 terminations. P, S & R contact materials not available with Z & Z3 terminations. 5 CENTER CONTCT & LL TERMINLS: Copper alloy, silver plated. 6 TERMINLS: Copper alloy, with matte-tin over nickel plate. NOTE: ny models supplied with P, S, R,Q, B or G contact material are RoHS compliant. Third ngle -59
9 lternate ction and Momentary Switches SEL E EPOXY SEL I EPOXY POTTED BSE NOTE: vailable with C, W, Z, Z3 terminations only. VILBLE HRDWRE Cap.120 (3,05).200 DI. (5,08 ) Cap Cap.155 (3,94) WHITE BLCK RED ORNGE YELLOW GRY Cap, Snap-fitting plunger WHITE BLCK RED ORNGE YELLOW GRY Cap, Snap-fitting plunger WHITE BLCK RED ORNGE YELLOW GRY Cap, J80, J81 & J82 options only 452D01000 WHITE 452D02000 BLCK 452D03000 RED 452D04000 ORNGE 452D05000 YELLOW 452D09000 GRY WHITE BLCK RED ORNGE YELLOW GRY WHITE BLCK RED ORNGE YELLOW GRY WHITE BLCK RED ORNGE YELLOW GRY Finish: Matte Cap, J86 & J96 options only Frame Frame WHITE BLCK RED ORNGE YELLOW GRY BLCK Finish: Matte BLCK Finish: Matte Finish: Matte NOTE: dditional nuts, locking rings and lockwashers available separately, see section Technical Data and dditional Hardware. Other cap & frame colors available, consult Customer Service Center. Third ngle -60
10 lternate ction and Momentary Switches Fits Z3 Termination female connector vailable in loose pieces. VILBLE HRDWRE Frames snap into panel opening and are independent from switch mounting. ccurate positioning of the PC mounted switch relative to the panel opening is necessary to provide proper clearance between actuator and frame. vailable in two basic styles and four panel thicknesses in.. Finish: Matte. TYPICL PPLICTION.090 (2,29) PNEL THK (3,18) PNEL THK BLCK Panel Inserts bove frames (part nos. 432XXXXXX) are also available with insert which accepts LED for indicator light assembly. Order insert separately from frame. Blank insert panel (without hole for LED) also available. LED not included. PNEL INSERT WITH HOLE FOR LED BLNK PNEL INSERT WITHOUT HOLE FOR LED BLCK Special colors, custom markings available, consult Customer Service Center. LED INFORMTION SWITCHES WITH LED SUPPLIED: J86 : Rectangular LEDs are supplied on 8060 Series pushbutton switches with J86 option. These LEDs are factory installed and are not replaceable. The following specifications apply: COLOR TYP. INTENSITY TYP. FORWRD VOLTGE TYP. FORWRD CURRENT MX RTINGS T 25ºC MBIENT TEMPERTURE FORWRD CONTINUOUS POWER VOLTGE FORWRD CURRENT DISSIPTION Flat denotes cathode..200 DI. (5,08 ).025 SQ. TYP. (0,63) Green Red* Yellow 1.0 mcd 0.5 mcd 4.0 mcd 2.1 V 20 m 10 m 20 m.230 DI. (5,84 ) Process Information: Soldering to LED leads must be completed within 5 seconds at 500ºF (260ºC) maximum. Caution: Circuit elements must limit forward current of LED to 50m max. continuous. * Extra-bright red LED available (typ. intensity 4.5 mcd), consult Customer Service Center. LEDs are not supplied with J82 & J84 options. LED snaps into switch frame surrounding actuator and is wired externally. 2.5 V 50 m 30 m 50 m 125 mw 75 mw 125 mw.030 (0,76).340 (8,64) Suggested LED for J82 & J84 options. Dimensions for reference only..750 (19,05) Third ngle -61
8060 Series Alternate Action and Momentary Pushbutton Switches
Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available Typical pplications Instrumentation Computers
C&K 8060 Series Alternate Action and Momentary Pushbutton Switches
lternate ction and Momentary Switches Specifications CONTCT RTING: Q contact material: 6 MPS @ 120 V C or 28 V DC; 3 MPS @ 250 V C. See page -53 for additional ratings. ELECTRICL LIFE: 50,000 make-and-break
8020 Series Snap-acting Momentary Pushbutton Switches
Snap-acting Momentary Switches Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS compliant
C&K 8020 Series Snap-acting Momentary Pushbutton Switches
Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS complient models available Typical pplications
TP Series Tiny Pushbutton Switches
Tiny Switches Features/Benefits Subminiature size capable of switching 1 MP Vertical & right angle terminations PC & panel mount models Snap-in front panel mounting available Epoxy terminal seal-compatible
8500 Series Subminiature Pushbutton Switches
8500 Series Features/Benefits Pre-travel or over-travel models available Ratings up to 3 MPS Reliable contact design RoHS compliant Typical pplications Detection Telecommunications and networking equipment
EP Series Sealed Tiny Pushbutton Switches
Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant models available
EP Series Sealed Tiny Pushbutton Switches
Sealed Tiny Switches Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant
EP Series Sealed Tiny Pushbutton Switches
Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant models available
Pushbutton Product Selection Guide
Product Selection Guide Series Switch Type ELUM Mom./ Latching EP Tiny TP Tiny E00 800 Subminiature Snapacting Mom. acting Snap- Mom. E00 Miniature 8060 lternate ction 8500 Subminiature KM Poles/Throws
C&K 7000 Series Miniature Toggle Switches
Miniature Switches Models vailable Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical
7000 Series Miniature Toggle Switches
Models vailable Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical pplications Telecommunications
C&K E Series Sealed Miniature Toggle Switches
Models vailable Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical pplications Telecommunications
8500 Series Subminiature Pushbutton Switches
Subminiature Switches Features/Benefits Pre-travel or over-travel models available Ratings up to 3 AMPS Reliable contact design RoHS compliant Typical Applications Detection Telecommunications and networking
T Series Subminiature Toggle Switches
Models vailable Features/Benefits Compact size small footprint Single and double pole models PC and panel mount options available Typical pplications Hand-held telecommunications Instrumentation Medical
C&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant Typical Applications Telecommunications
7000 Series Miniature Rocker & Lever Handle Switches
Miniature & Lever Handle Switches Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant
C&K 7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical Applications Telecommunications Instrumentation
7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoS compliant Typical Applications Telecommunications
C&K ET Series Sealed Subminiature Toggle Switches
Models vailable Features/Benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact sizeand small footprint save PCB space Typical
E Series Sealed Miniature Rocker and Lever Handle Switches
Sealed Miniature and Lever Handle Switches Features/Benefits Sealed against solder and cleaning process contaminants ESD Resistance all actuator options, case & bushing UL 94V-0 RoHS compliant Typical
E Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available
Rockers Product Selection Guide
s Product Selection Guide Series 7000 E ET T 9000 DA D Switch Type Subminiature Subminiature & Lever andle Poles/Throws,, 3PDT, 4PDT,, 3PDT,, DPST, Max. Current 5 Amps 7.5 Amps 3 Amps 3 Amps 4 Amps Washable
7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
onlinecomponents.com
eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available Typical Applications
7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
ET Series Sealed Subminiature Rocker Switches
ET Series Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications Instrumentation
T Series Subminiature Toggle Switches
eatures/benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation
ET Series Sealed Subminiature Rocker Switches
Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications Instrumentation Computers
C&K 7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical Applications Telecommunications
ET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications
C&K E Series Sealed Miniature Toggle Switches
Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available Typical Applications Telecommunications
C&K E Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical Applications Telecommunications
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. C&K ET Series Sealed Subminiature Switches Features/Benefits Sealed against
C&K ET Series Sealed Subminiature Rocker Switches
Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoS compliant Typical Applications Telecommunications Instrumentation Computers
C&K T Series Subminiature Toggle Switches
Features/Benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation
C&K 8020 Series Snap-acting Momentary Pushbutton Switches
Snap-acting Momentary Switches Models Available Features/enefits Positive tactile feel Multi-positions available Wide variety of termination options Typical Applications Instrumentation Computer peripherals
ET Series Sealed Subminiature Toggle Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact size and small footprint save PCB
C&K ET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space Typical Applications Telecommunications Instrumentation
T80-R Miniature Rocker and Paddle Switches Compliant
T80-R Miniature Rocker and Paddle Switches Compliant TCT DIP PUSH BUTT SLIDE ECIFICTIS MTERILS CTCT RTING: @ VC or 8 VDC ( Q terminal) CSE - diallyl phthalate ( ) ELECTRICL LIFE: 0,000 make-and-break cycles
Toggles Product Selection Guide
s Product Selection Guide s Series 7000 Military E ET T GT 9000 Switch Type Miniature Miniature Miniature Subminiature Subminiature Ultraminiature Power Poles/Throws,, 3PDT, 4PDT,,,, 3PDT SPST,, SPST,,
9000 Series Power Rocker and Lever Handle Switches
Power and Lever Handle Switches Features/Benefits Thermoset UL 94V-0 housing Rugged construction Variety of actuator and termination options RoHS compliant Typical Applications Small equipment Shut-off
F Series Pushbutton Switches
F Series Features/Benefits Up to 10 poles per module Various contact terminals Various mounting & switch ganging configurations Mechanical indicator buttons RoHS compliant Typical pplications udio selection
Miniature Toggle Switches
T80-T Miniature Toggle Switches Compliant D E L F R E E TCT DIP PUSH BUTT SLIDE ROCKER TOGGLE INDEX SPECIFICTIS CTCT RTING: @ VC or 8 VDC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full
M Series Half-inch Rotary Switches
Half-inch Switches Features/Benefits Multi-pole and multi-positions Panel and PCB mounting Stainless steel actuator Non-shorting contacts RoHS Compliant IP67 (F option only) Typical Applications Test equipment
T80-T Miniature Toggle Switches Compliant
T80-T Miniature Toggle Switches Compliant TCT DIP PUSH BUTT SLIDE SPECIFICTIS CTCT RTING: @ VC or 8 VDC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full load CTCT RESISTNCE: 0 m max. initial
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Switches Features/Benefits Up to 10 poles per module Various contact terminals
T101J1ZQE2 T201J1ABE2 T101J1AVBE2 T101J1V3BE2. models available, see page B-52.
T101J1ZQE2 T201J1AE2 T101J1AVE2 T101J1V3E2 models available, see page -52. Easy uild-a-switch elow is a complete listing of available options for T SERIES TINY ROCKER SWITCHES. uild-a-switch allows you
A Series 1-4 Pole Rotary Switches
1-4 Pole Switches Features/Benefits Multi-pole and multi-position Positive detent Shorting & non-shorting contacts Panel and PCB mounting RoHS Compliant Typical Applications Automotive Major and small
Miniature Toggle Switches. Bushing. Termination B solder lug C P.C 1.27width D Quick connect D1 wire wrap(19.05) D3 wire wrap(10.
E L SPECIFICTIS CTCT RTING: @ VC or 8 VC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full load CTCT RESISTNCE: 0 m max. initial @- VC,00 m INSULTI RESISTNCE:,000 M min. IELECTRIC STRENGTH:,00
S and SF series Washable miniature toggle switches
S and SF series Washable miniature toggle switches Distinctive features and specifications Sealed Secure assembly of the two case parts Internally sealed bushing Epoxy sealed terminals Process compatible
ST SERIES - MINIATURE TOGGLE SWITCHES
ST SERIES - MINITURE TOGGLE SWITCHES FETURES Dry circuit through power ratings. Ultra-rugged construction SPDT & DPDT models with numerous options. Panel, panel & p.c. and p.c. mounting models, lighted
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Features/Benefits Multi-pole and multi-position Positive detent Shorting
ANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
SPECIFICATIONS MATERIALS. NONE = Black WHT= White RED = Red M1 M3 M5. YEL = Yellow. GRY = Gray PUR = Purple. **Contact E-Switch for additional colors
SERIES 300 AND PADDLE - MINIATURE FEATURES & BENEFITS Multiple rocker & paddle options Up to 4 poles Multiple termination options Snap-in panel mount option available HOW TO ORDER APPLICATIONS/MARKETS
Snap Action Miniature Pushbutton Switches
Snap Action Miniature Switches SERIES 38C Miniature Switches FEATURES and Circuitry Choice of Bushings, and Terminations Caps and Frames Available UL Recoginized DIMENSIONS IN INCHES (AND MILLIMETERS)
GT Series Sealed Ultraminiature Toggle Switches
Sealed Ultraminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants Ultraminiature size, smallest footprint available Thru-hole and surface mount models High temperature
C&K NE-18 Series Mains / Power Switches
C&K NE-18 Series Features/Benefits Chassis or panel mount Various buttons and illumination Various contact configurations Typical pplications Mains/power switching Consumer electronics udio equipment Digital
ANT. Materials. Features. Miniature Toggle
Specificationscations RoHS Compliant ANT Electrical Ratings Electrical Life Contact Resistance 5A @ 0VAC, 8VDC A @ 50VAC See Contact Options 50,000 cycles typical
DM Series Miniature Illuminated Power Rocker Switches
Miniature Illuminated Power Switches Features/Benefits AMPS to AMPS Illuminated LED Positive detent RoHS compliant Typical Applications Instrumentation Industrial Office machines UL 658-1 Specifications
RTA Series 1 4 Poles Coded Rotary Switches
1 4 Poles Coded Switches Features/Benefits PCB or hand soldering versions Bushing mounting Multiple poles Decimal and hexadecimal codes Screwdriver slot or extended actuator RoHS Compliant Typical Applications
C&K EP Series Sealed Tiny Pushbutton Switches
Models Available Features/enefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available Typical Applications
C&K LM Series Subminiature Precision Snap-acting Switches
Models vailable Features/enefits Sealed actuator and case meets IP65 degree of protection Compact size ideal when space is limited Long life 100,000 cycles typical Reliable snap-acting mechanism Typical
SERIES 100 SWITCHES TOGGLE SWITCHES - MINIATURE. Phone: Fax: SPECIFICATIONS MATERIALS
TACT SERIES 100 - MINIATURE SPECIFICATIONS Contact Rating: Life Expectancy: Contact Resistance: Insulation Resistance: Dielectric Strength: See contact material options 40,000 make-and-break cycles at
Sealed toggle switches
Distinctive features and specifications Completely sealed switching chamber Three types of terminals UL approved ELECTRICL SPECIFICTIONS Max. current/voltage rating with load and electrical life at full
Series 300. Miniature Rocker & Paddle Switches
Series 00 SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 0,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. inital @ -VDC. 00mA for both
CIT SWITCHTM ANT SPECIFICATIONS
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
RTBH Series 1-2 Pole Coded Rotary Switches
RTBH Series 1-2 Pole Coded Switches Features/Benefits Totally sealed Detent angles, 15, 22.5, 30 and 36 Multi pole Coding functions Robust construction RoHS Compliant Typical Applications Telecommunications
C&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available poxy terminal seal compatible with bottom-wash cleaning Typical Applications Test & measurement equipment
C&K GT Series Sealed Ultraminiature Toggle Switches
C&K T Series Sealed Ultraminiature Switches Features/Benefits Sealed against solder and cleaning process contaminants Ultraminiature size, smallest footprint available Thru-hole and surface mount models
Distinctive Characteristics
Distinctive Characteristics ntirotation design, standard on noncylindrical levers, mates toggle and bushing; bottom of toggles has two flatted sides which fit into a complementary opening inside bushing.
Momentary or alternate action pushbutton switches. UL approved 3A 250VAC, 6A 125VAC. Availability : consult factory for details of approved models.
Distinctive features and specifications Bushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 4A 30VDC - gold
ELECTRICAL SPECIFICATIONS
Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for
9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview
A 9000 SERIES Overview 9 SERIES Number of poles 3 Single pole Electrical functions 2 Normally closed (NC) 3 Normally open (NO) Terminals, case and bushing Case height 8 (.314) 2 Straight terminals - threaded
SPECIFICATIONS: MATERIALS: If your preferred product configuration is not shown, please contact our sales representative for custom design.
SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 50,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. initial @2-4VDC 00mA for both silver
Y Series 4, 5 & 6 Tumbler Switchlocks
, 5 & 6 Tumbler s Features/Benefits Anti-static switch exceeds 0 KV DCstatic resistance omentary models available Wire leads and harnesses available Typical Applications Point-of-sale terminals Cash registers
GT Series Sealed Ultraminiature Toggle Switches
Sealed Ultraminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants Ultraminiature size, smallest footprint available Thru-hole and surface mount models High temperature
8000 series Momentary or alternate action pushbutton switches
Distinctive features and specifications ushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 3A 250VAC - 6A
DM Series Miniature 2 Pole Power Rocker Switches
Miniature 2 Pole Power Switches Features/Benefits AMPS to AMPS Quick connect terminals Double pole in miniature size Recessed bracket available prevents accidental actuation RoHS compliant Typical Applications
Pushbutton Switches Sub-Miniature
Pushbutton Switches Specifications: Contact rating Mechanical life Maximum contact resistance Minimum insulation resistance Dielectric strength Operating temperature Materials: Case Plunger Bushing Housing
Rotary Switches Product Selection Guide
Switches Product Selection Guide Series A RTA M R F H RW RM ENC Switch Type Multi-pole/ Multi-position Multi-pole/ Multi-position Half-inch Rota-slide Rota-slide Power Rota-slide Subminiature SMT Subminiature
PROTECTRON MONITORING CONNECTOR SYSTEM
MONITORING CONNECTOR SYSTEM 1MM VERTICL JCK TIP (TEST POINT) 1mm Vertical Jack Tip Insulated Conical Type P8001 : 5 max. : 5mW max. Insulation Resistance : 1000MW min. Dielectric Withstanding : 500V C
13000 series Professional quick-break momentary pushbutton switches
Distinctive features and specifications PC and panel mount models ushing Ø 6,35 (1/4) and 11,9 (15/32) UL and CECC approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : -
Distinctive Characteristics
Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. ntistatic superstructure, consisting of the carbon impregnated bushing and the
MINIATURE SWITCHES. Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action)
Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action) MINIATURE SWITCHES PS SERIES 5 AMP. (S.P.) 1 AMP (D.P.) 0.4 VA DIRECT PANEL MOUNT Basic P/N Terminal Type Poles Cap
Two case lengths. Three electrical functions. Sealing options. Model X1146 with Ø 16 (.630) bushing ELECTRICAL SPECIFICATIONS.
Distinctive features and specifications Two case lengths Three electrical functions Sealing options Model X1146 with Ø 16 (.630) bushing Max. current/voltage rating with resistive load : - silver contact
TYPICAL SWITCH ORDERING EXAMPLE. Contact Materials & Ratings. Silver Rated 125V AC & 250V AC Gold Rated 0.4VA 28V AC/DC max.
Large ushing Miniature Pushbuttons Series M000 S M Poles & ircuits 0 SPDT () 06 SPDT 06 DPDT () 08 DPDT 8 PDT () 8 PDT ( ) = Momentary Plunger Type TYPIL SWITH ORDERING EXMPLE 0 S W 0 D Plunger for Screw-on
Product Range. Rocker & Paddle Switches. Rocker & Paddle Switches. Rocker & Paddle Switches
Product Range for Panel Mounting: F, TRD and Gemini Series for PCB Mounting: Gemini Series Main features: Sealed or unsealed versions Various switch functions Gold or silver contacts LED illumination available
D Series Miniature Snap-in Power Rocker Switches
Miniature Snap-in Power Switches Features/Benefits Momentary and maintained models PC and quick connect terminals Recessed bracket available prevents accidental actuation RoS compliant Typical Applications
8000 series. Momentary or alternate action pushbutton switches DISTINCTIVE FEATURES ELECTRICAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS
SW-8000-808 DISTINCTIVE FEATURES Momentary or alternate Bushing Ø 6.35 (/4) and Ø.9 (5/3) UL approved ELECTRICAL SPECIFICATIS Max. current/voltage rating with resistive load : - silver contacts : 4 A 30
.410 (10.41) 1/4-40 UNS-2A Ø.115 (Ø 2.92) .410 (10.41) Ø.115 (Ø 2.92) Ø.115 (Ø 2.92)
Series A: Miniature Switches Series A Miniature Switches FEATURES Save Space and Weight,, PDT, and DPT Circuitry Choice of Actuators, Bushings and Terminations UL Recognized Models In inches (and millimeters)
TYPICAL SWITCH ORDERING EXAMPLE A2 G 40. Contact Materials & Ratings
MB4 s & ircuits SPDT ON (ON) DPDT ON (ON) ( ) = Momentary E E S S Bushings Smooth with D Flat Threaded with D Flat IMPORTNT: Switches are supplied without UL, culus & S marking unless specified. UL, culus
.138 (3.50).024 (0.60) .370 (9.40) .185 (4.70) TYP. EPOXY SEAL.030 (0.80) .083 (2.11).740 (18.7) TYP. Standard Paddle Color - (Black) EPOXY SEAL
The Gemini Series "" Series Paddles Refer to Pages -7 For dditional Options MTRIL SPCIFICTIONS: Contacts/Terminals... Gold/gold flash Silver/tin lead Case Material... Thermoset 9V-0 ctuator Material...
18000 series Snap-action momentary pushbutton switches
Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for
151
C INLETs & OUTLETs IEC 30 & Mini IEC CONNECTORS Introduction: dam Tech IEC & Mini IEC Series C Inlets and Outlets are primary power receptacles designed, manufactured, tested and approved to UL, CS, VDE
2M Series Sub-Miniature Toggle Switches
M Series Sub-Miniature Toggle Switches SPECIFICATIS CTACT RATING: Dependent upon contact material See Page 8. MECHANICAL LIFE: 0,000 make-and-break cycles. CTACT RESISTANCE: 0 m max. initial @ -VDC 00mA
MINIATURE SWITCHES. Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action)
Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action) MINIATURE SWITCHES PS SERIES 5 AMP. (S.P.) 1 AMP (D.P.) 0.4 VA DIRECT PANEL MOUNT ONE POLE TWO POLE Basic P/N Terminal
9 ORDERING INFORMATION MTJ MTJ SERIES
Introduction: dam Tech MTJ series Modular Jacks are a complete line of PCB and wire leaded jacks which are UL and CS approved and meet all required FCC rules and regulations. dam Tech offers a multitude