SMT T SERIES SURFACE MOUNT TINY SWITCHES Distinctive features

Size: px
Start display at page:

Download "SMT T SERIES SURFACE MOUNT TINY SWITCHES Distinctive features"

Transcription

1 Distinctive features ENTIRELY DESIGNED FOR SURFCE MOUNT Surface mount devices (SMD) are subjected to more stringent constraints of temperature, solderability and space savings than through-hole components. To meet these requirements, has designed a range of surface mount switches including 3 product types : - pushbutton switches, TP series - slide switches, TG series - toggle switches, TL series Tape and reel packaging This type of packaging is recommended for the following reasons : - economy, - suitability for automated placement - large number of components per packaging unit - good component positioning - protection of terminals against damage during handling - high static resistance Reflow solderable High temperature plastic materials Tin plated ground plate Terminal coating : tin-lead alloy aver nickel plating Terminals turned to the outside, preventing the shadow effect in infrared soldering and permitting visual inspection of solder joints Distance between case and circuit : 0,55 mm (.021) End stackable with 10,16 mm (.40) pitch vailable with positioning pins to ensure switch orientation during the reflow process and increasing switch mechanical resistance Pushbutton and toggle models protected against electrostatic discharges (ESD) up to 10 KV Washable Construction withstands cleaning processes, including hot water under pressure -6

2 Specifications ELECTRICL SPECIFICTIONS PCKGING Max. current/voltage rating with resistive load : 0,4V 20V max. C or DC Minimum load : 10m 50mV or 10µ 5VDC Initial contact resistance : - pushbutton switches : 50 mω max. - slide or toggle switches : 20 mω max. Insulation resistance : MΩ min. at 500VDC Dielectric strength : Vrms. 50 Hz min. between terminals and frame 500 Vrms. 50 Hz min. between terminals Electrical life at full load : - pushbutton switches : cycles - 2 position switches : cycles - 3 position switches : cycles Static resistance (pushbutton or toggle models) : 10 KV (Schaffner equipment) GENERL SPECIFICTIONS Travel: - slide switches : 2,60 mm (.102) - pushbutton switches : function 2 : 1 mm (.039) - function 3 : 0,8 mm Operating temperature : -40 C to +85 C Moisture resistance : 21days per IEC test 11c Vibration resistance : Hz / 10 g per IEC test 6d Shock resistance : 50 g per IEC test 6c Unrolling direction 7.70 (.303) (.472) 7.50 (.295) 44.00±0.30 (1.732±.011) 40.40±0.10 (1.590±.003) TPE for TL - TP 24.00±0.30 (.944±.011) MTERILS (.629) Case : high temperature plastic material UL94-V0 ctuator : - button and slide : high temperature plastic material UL94-V0 - toggle : brass, nickel plated, with high temperature UL94-V0 plastic cap Ground plate and positioning pins : steel, tin plated Contacts : brass, gold plated Terminals : brass, with tin-lead alloy over nickel plating Rubber seal (on slide switches) : silicone, translucent TPE for TG Reflow soldering : - infrared - vapor phase - infrared convection Washable per IE-RS448-2 : - water + detergent - preferred - solvents SOLDERING ND CLENING Dimensions : First dimensions are in mm while inches are shown as bracketted numbers. Standard packaging unit : TL and TP : 700 pieces - TG : 500 pieces Tape meeting international standard IEC - Publication (EI481) Start leader : 400 mm min. Ø Maxi ( DI MX) REEL Tape width (.944) (1.732) Reel (dimension ) Ø1±0.25 (.511 DI±.009) /0.00 ( /.000) Ø mini (3.937 DI MIN) /0.00 ( /.000) -7

3 With or without positioning pins On slide switches, rubber seal removable after cleaning Single pole Pushbutton and toggle models also available for vertical mounting. On request Funct. 2 Funct. 3 Pushbutton Slide Toggle Pushbutton Slide Toggle Pushbutton switches TP32WS83500 ON MOM TP33WS83500 OFF MOM (.165) 4.50 (.177) Ø (.098 DI) (.196 DI) Shown in function 2 Pushbutton switches - with positioning pins TP32WS83565 ON MOM TP33WS83565 OFF MOM 1.00 (.039) (.165) (.196 DI) 4.50 (.177) Ø (.098 DI) Ø (.031 DI) Shown in function 2 Slide switches 0.90 (.035) TG36WS80050 ON - ON TG39WS80050 ON OFF ON 1.30 (.051) -8

4 Slide switches - with positioning pins TG36WS80065 ON - ON TG39WS80065 ON OFF ON Ø (.031 DI) Slide switches with flush actuator 0.90 (.035) Without positioning pins TG36WS81050 ON - ON TG39WS81050 ON OFF ON With positioning pins TG36WS81065 ON - ON TG39WS81065 ON OFF ON 1.30 (.051) Shown without positioning pins (positioning pins same as above) Toggle switches III II I TL36WS84000 ON - ON TL39WS84000 ON OFF ON TL37WS84000 MOM OFF MOM TL38WS84000 ON OFF MOM TL32WS84000 ON - MOM Ø2.40 (.094 DI) (.165) 5.50 (.216) I II 24 III (.196 DI) Toggle switches - with positioning pins III II I TL36WS84065 ON - ON TL39WS84065 ON OFF ON TL37WS84065 MOM OFF MOM TL38WS84065 ON OFF MOM TL32WS84065 ON - MOM Ø2.40 (.094 DI) 1.00 (.039) (.165) (.196 DI) 5.50 (.216) I II 24 III Ø (.031 DI) -9

5 Soldering process REFLOW SOLDERING (standard profile) PROCESS STEPS The P.C. board, carried by a conveyor belt, goes through the different areas of a reflow soldering oven : - pre-heating (maximum 170 C, 60 seconds) - reflow peak (maximum 245 C) - final cleaning (optional) P.C. board TEMPERTURE / TIME PROFILE (typical) Solder paste printing C Component placement s 100 Reflow soldering 0 0 pre-heating préchauffage drying séchage stabilization stabilisation reflow pic de refroidissement gradual cooling peak refusion t (s) Final cleaning BORD REWORK TECHNIQUE Hot air reflow technique is preferred. void use of a traditional soldering iron. Caution : Excessive and/or repeated high temperature exposure may affect switch performance and reliability. -10

S and SF series Washable miniature toggle switches

S and SF series Washable miniature toggle switches S and SF series Washable miniature toggle switches Distinctive features and specifications Sealed Secure assembly of the two case parts Internally sealed bushing Epoxy sealed terminals Process compatible

More information

Sealed toggle switches

Sealed toggle switches Distinctive features and specifications Completely sealed switching chamber Three types of terminals UL approved ELECTRICL SPECIFICTIONS Max. current/voltage rating with load and electrical life at full

More information

EP Series Sealed Tiny Pushbutton Switches

EP Series Sealed Tiny Pushbutton Switches Sealed Tiny Switches Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant

More information

EP Series Sealed Tiny Pushbutton Switches

EP Series Sealed Tiny Pushbutton Switches Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant models available

More information

EP Series Sealed Tiny Pushbutton Switches

EP Series Sealed Tiny Pushbutton Switches Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant models available

More information

Momentary or alternate action pushbutton switches. UL approved 3A 250VAC, 6A 125VAC. Availability : consult factory for details of approved models.

Momentary or alternate action pushbutton switches. UL approved 3A 250VAC, 6A 125VAC. Availability : consult factory for details of approved models. Distinctive features and specifications Bushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 4A 30VDC - gold

More information

8000 series Momentary or alternate action pushbutton switches

8000 series Momentary or alternate action pushbutton switches Distinctive features and specifications ushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 3A 250VAC - 6A

More information

ROCKER & LEVER SWITCHES

ROCKER & LEVER SWITCHES ROCKER & LEVER SWITCHES SEE ROCKER & LEVER SWITCH SELECTION GUIDE ON NEXT PAGE SPECIFICATIONS SUJECT TO CHANGE WITHOUT NOTICE APEM, PO OX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: (877) 246-7890 FAX:

More information

Pushbutton and key switches

Pushbutton and key switches Pushbutton and key switches Section ZP Tiny, metal bushing, momentary 3 SMT TP Tiny, SMT, washable, momentary 5 TP Tiny, washable, momentary 7 9100-9200-9500 Subminiature, momentary 13 IF Miniature, sealed,

More information

Dip and coded rotary switches

Dip and coded rotary switches Dip and coded rotary switches Section P (R) Low profile coted rotary, SMT or through-hole PT (R) oded rotary, through-hole DS/DSR Standard DIP DP/DPL Piano DIP D Right angle DIP IKN Low profile DIP, SMT

More information

9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview

9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview A 9000 SERIES Overview 9 SERIES Number of poles 3 Single pole Electrical functions 2 Normally closed (NC) 3 Normally open (NO) Terminals, case and bushing Case height 8 (.314) 2 Straight terminals - threaded

More information

8000 series. Momentary or alternate action pushbutton switches DISTINCTIVE FEATURES ELECTRICAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS

8000 series. Momentary or alternate action pushbutton switches DISTINCTIVE FEATURES ELECTRICAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS SW-8000-808 DISTINCTIVE FEATURES Momentary or alternate Bushing Ø 6.35 (/4) and Ø.9 (5/3) UL approved ELECTRICAL SPECIFICATIS Max. current/voltage rating with resistive load : - silver contacts : 4 A 30

More information

600H and 600NH series Toggle switches - high amperage

600H and 600NH series Toggle switches - high amperage 600H and 600NH series Toggle switches - high amperage Distinctive features and specifications UG1410 Construction Terminal and contact support are manufactured from a single piece of metal. The contacts

More information

13000 series Professional quick-break momentary pushbutton switches

13000 series Professional quick-break momentary pushbutton switches Distinctive features and specifications PC and panel mount models ushing Ø 6,35 (1/4) and 11,9 (15/32) UL and CECC approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : -

More information

C&K ET Series Sealed Subminiature Toggle Switches

C&K ET Series Sealed Subminiature Toggle Switches Models vailable Features/Benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact sizeand small footprint save PCB space Typical

More information

KSC Series Sealed Tact Switch for SMT

KSC Series Sealed Tact Switch for SMT KSC Series Features/Benefits Positive tactile feeling J or G terminations Various heights IP67 Typical Applications Automotive Cellular phones Industrial electronics Network infrastructure and IT Elevator

More information

Two case lengths. Three electrical functions. Sealing options. Model X1146 with Ø 16 (.630) bushing ELECTRICAL SPECIFICATIONS.

Two case lengths. Three electrical functions. Sealing options. Model X1146 with Ø 16 (.630) bushing ELECTRICAL SPECIFICATIONS. Distinctive features and specifications Two case lengths Three electrical functions Sealing options Model X1146 with Ø 16 (.630) bushing Max. current/voltage rating with resistive load : - silver contact

More information

R Z18 Series : SMB CARLOCK

R Z18 Series : SMB CARLOCK .. pn ao TECHNICAL DATA SHEET 1 / 7 EDGE CARD PIN IN PASTE VERSION All dimensions are in mm. COMPONENTS MATERIALS PLATING (µm) BODY CENTER CONTACT OUTER CONTACT INSULATOR GASKET OTHERS PARTS ZINC ALLOY

More information

ELECTRICAL SPECIFICATIONS

ELECTRICAL SPECIFICATIONS Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for

More information

SERIES SIZE RATINGS (Max. in bold) POLES PAGE(S)

SERIES SIZE RATINGS (Max. in bold) POLES PAGE(S) TOGGLE SWTCHES TOGGLE SWTCH SELECTON GUDE: This catalog contains an extensive variety of toggle switches with numerous options and accessories. To facilitate easy selection of the desired switch for your

More information

TP Series Tiny Pushbutton Switches

TP Series Tiny Pushbutton Switches Tiny Switches Features/Benefits Subminiature size capable of switching 1 MP Vertical & right angle terminations PC & panel mount models Snap-in front panel mounting available Epoxy terminal seal-compatible

More information

18000 series Snap-action momentary pushbutton switches

18000 series Snap-action momentary pushbutton switches Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for

More information

600H - 600NH UL CSA NF-VDE UL 1054 CSA 22-2 EN

600H - 600NH UL CSA NF-VDE UL 1054 CSA 22-2 EN SW-600H-600NH-80 PNEL SWTCHES DSTNCTVE FETURES Robust mechanism High current/voltage rating nsulated or metal lever UL, CS and NF-VDE (EN 6058-) approved ELECTRCL SPECFCTS Max. current/voltage ratings

More information

ET Series Sealed Subminiature Toggle Switches

ET Series Sealed Subminiature Toggle Switches Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact size and small footprint save PCB

More information

C&K 8060 Series Alternate Action and Momentary Pushbutton Switches

C&K 8060 Series Alternate Action and Momentary Pushbutton Switches lternate ction and Momentary Switches Specifications CONTCT RTING: Q contact material: 6 MPS @ 120 V C or 28 V DC; 3 MPS @ 250 V C. See page -53 for additional ratings. ELECTRICL LIFE: 50,000 make-and-break

More information

5000 SERIES TOGGLE SWITCHES Distinctive features B

5000 SERIES TOGGLE SWITCHES Distinctive features B 5000 SERES TOGGLE SWTCHES Distinctive features THE WDEST RANGE N MNATURE SWTCHES 7 7 actuators including toggles, paddle levers and locking levers in different lengths. 5 5 contact materials from dry circuit

More information

8060 Series Alternate Action and Momentary Pushbutton Switches

8060 Series Alternate Action and Momentary Pushbutton Switches Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available Typical pplications Instrumentation Computers

More information

600H AND 600NH SERIES TOGGLE SWITCHES - HIGH AMPERAGE Overview

600H AND 600NH SERIES TOGGLE SWITCHES - HIGH AMPERAGE Overview 600H AND 600NH SERES TOGGLE SWTCHES - HGH AMPERAGE Overview 6 SERES Number of poles Electrical functions Actuator and terminals Single pole Double pole 5 For pole, see 600 series. ON - OFF 5 MOM - ON 6

More information

8060 Series Alternate Action and Momentary Pushbutton Switches

8060 Series Alternate Action and Momentary Pushbutton Switches lternate ction and Momentary Switches Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available

More information

3500 SERIES HIGH PERFORMANCE TOGGLE SWITCHES - ENVIRONMENTALLY SEALED Distinctive features

3500 SERIES HIGH PERFORMANCE TOGGLE SWITCHES - ENVIRONMENTALLY SEALED Distinctive features HGH PERFORMNCE TOGGLE SWTCHES - ENVRONMENTLLY SELED Distinctive features Completely sealed switches withstanding 0,1 bar pressure Front face and cover-to-case silicone seal Moulded-in terminal inserts

More information

8020 Series Snap-acting Momentary Pushbutton Switches

8020 Series Snap-acting Momentary Pushbutton Switches Snap-acting Momentary Switches Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS compliant

More information

AV SERIES PUSHBUTTON SWITCHES Distinctive features

AV SERIES PUSHBUTTON SWITCHES Distinctive features PUSHBUTTON SWITCHES Distinctive features Attractive, robust and durable Irremovable Anti-jamming construction : reduced travel to prevent insertion of foreign parts and mechanism protected against crushing

More information

C&K 8020 Series Snap-acting Momentary Pushbutton Switches

C&K 8020 Series Snap-acting Momentary Pushbutton Switches Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS complient models available Typical pplications

More information

1200 series. Momentary pushbutton switches - round plunger. Distinctive features and specifications. Butt action contacts, double break

1200 series. Momentary pushbutton switches - round plunger. Distinctive features and specifications. Butt action contacts, double break Distinctive features and specifications Butt action contacts, double break NF (EN 61058-1), UL and CSA approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts

More information

MAXIMUM. Mill-Max Spring-loaded Connectors Minimize Noise

MAXIMUM. Mill-Max Spring-loaded Connectors Minimize Noise MXIMUM solutions Mill-Max Spring-loaded Connectors Minimize Noise When the power is on, you don t want shock or vibration to create spurious signals. Mill-Max Spring-loaded Connectors provide a reliable

More information

AV series Anti-vandal and security pushbutton switches

AV series Anti-vandal and security pushbutton switches Anti-vandal and security pushbutton switches Distinctive features Attractive, robust and durable Irremovable Anti-jamming construction : reduced travel to prevent insertion of foreign parts and mechanism

More information

C&K E Series Sealed Miniature Toggle Switches

C&K E Series Sealed Miniature Toggle Switches Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical Applications Telecommunications

More information

SPRING - LOADED CONNECTORS

SPRING - LOADED CONNECTORS SPRING - LOADED CONNECTORS SPRING LOADED CONNECTORS QUICK SELECTOR CHART SPRING-LOADED CONNECTORS AND PAD CONNECTORS GRID 1.25 mm 2 mm 2.54 mm SINGLE ROW SINGLE ROW DOUBLE ROW SINGLE ROW DOUBLE ROW SLC

More information

Sealed pushbutton switches - bushing Ø 16 mm - momentary

Sealed pushbutton switches - bushing Ø 16 mm - momentary Sealed pushbutton switches - bushing Ø 16 mm - momentary Distinctive features The IR series is a range of sealed momentary pushbutton switches with dia. 16 mm bushing. This series is divided into 2 families

More information

E Series Sealed Miniature Toggle Switches

E Series Sealed Miniature Toggle Switches Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available

More information

Toggles Product Selection Guide

Toggles Product Selection Guide s Product Selection Guide s Series 7000 Military E ET T GT 9000 Switch Type Miniature Miniature Miniature Subminiature Subminiature Ultraminiature Power Poles/Throws,, 3PDT, 4PDT,,,, 3PDT SPST,, SPST,,

More information

1.27mm DUAL ROW STRAIGHT HEADER

1.27mm DUAL ROW STRAIGHT HEADER 1.27mm DUL ROW STRIGHT HEDER 1295 SERIES. 1.27 x 1.27mm(0.050 x 0.050 ). For PC Solder! vailable in 8 through 100 circuits! Suitable for Low profile and high density 1.27mm pitch! Thermoplastic UL 94V-0.

More information

C&K E Series Sealed Miniature Toggle Switches

C&K E Series Sealed Miniature Toggle Switches Models vailable Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical pplications Telecommunications

More information

8500 Series Subminiature Pushbutton Switches

8500 Series Subminiature Pushbutton Switches 8500 Series Features/Benefits Pre-travel or over-travel models available Ratings up to 3 MPS Reliable contact design RoHS compliant Typical pplications Detection Telecommunications and networking equipment

More information

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Connectors Features Snap-on interface facilitates assembly Conforms to CECC

More information

Series KMX KMR 2-4 KMS PTS525 KSR KSS KST. 4,6 x 2,8 6,4 x 5,25 7,15x3,8 7,3x3,8 7 x 3, , , ,000

Series KMX KMR 2-4 KMS PTS525 KSR KSS KST. 4,6 x 2,8 6,4 x 5,25 7,15x3,8 7,3x3,8 7 x 3, , , ,000 Product Selection Guide Surface Mount Series KMX KMR 2-4 KMS PTS525 KSR KSS KST Size on PC L x W (mm) 4,1 x 4,1 4,6 x 2,8 4,6 x 2,8 6,4 x 5,25 7,15x3,8 7,3x3,8 7 x 3,5 J G 6,8x6,2 10x6,2 Total Height (mm)

More information

Distinctive Characteristics

Distinctive Characteristics Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. ntistatic superstructure, consisting of the carbon impregnated bushing and the

More information

PRODUCT SPECIFICATION

PRODUCT SPECIFICATION 1.0mm Pitch ZIF FPC Page 1 Top Entry Side Entry 1.0mm Pitch ZIF FPC Page 2 1.0 SCOPE. This specification covers performance, tests and quality requirements for 1.0mm Pitch ZIF FPC Connector 2.0 APPLICABLE

More information

Surface Mount > 0603L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W)

Surface Mount > 0603L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W) 0603L Series RoHS Description The 0603L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals

More information

ET Series Sealed Subminiature Rocker Switches

ET Series Sealed Subminiature Rocker Switches ET Series Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications Instrumentation

More information

ET Series Sealed Subminiature Rocker Switches

ET Series Sealed Subminiature Rocker Switches Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications Instrumentation Computers

More information

ANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871

ANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871 Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability

More information

Pushbutton Product Selection Guide

Pushbutton Product Selection Guide Product Selection Guide Series Switch Type ELUM Mom./ Latching EP Tiny TP Tiny E00 800 Subminiature Snapacting Mom. acting Snap- Mom. E00 Miniature 8060 lternate ction 8500 Subminiature KM Poles/Throws

More information

SELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current

SELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry

More information

ET Series Sealed Subminiature Rocker Switches

ET Series Sealed Subminiature Rocker Switches Sealed Subminiature Switches Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications

More information

Distinctive Characteristics

Distinctive Characteristics Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. Antistatic superstructure, consisting of the carbon impregnated bushing and

More information

Surface Mount > 1210L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W) Time (Sec.)

Surface Mount > 1210L Series. Description. Features. Applications. Maximum Time To Trip Current (A) P d typ. (W) Time (Sec.) 1210L Series RoHS Description The 1210L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals

More information

NXE2 Series Isolated 2W Single Output SM DC-DC Converters

NXE2 Series Isolated 2W Single Output SM DC-DC Converters SELECTION GUIDE NXE2 Series FEATURES Patents pending Lower Profile UL69 Recognised ANSI/AAMI ES661-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry

More information

SPECIFICATIONS, PACKAGING INFORMATION, AGENCY APPROVALS AND PART NUMBERING SYSTEMS FOR TABLE F2 FUSES

SPECIFICATIONS, PACKAGING INFORMATION, AGENCY APPROVALS AND PART NUMBERING SYSTEMS FOR TABLE F2 FUSES SPECIFICATIONS, PACKAGING INFORMATION, AGENCY APPROVALS AND PART NUMBERING SYSTEMS FOR TABLE F2 FUSES Table F1 Environmental Specifications for Table F2 Fuses Operating Temperature Mechanical Vibration

More information

C&K E Series Sealed Miniature Toggle Switches

C&K E Series Sealed Miniature Toggle Switches Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available Typical Applications Telecommunications

More information

Switch EDG/EDS SPST EDG/EDS DPST EDG/EDS SPDT EDG/EDS 3PST EDG/EDS 4PST EDG/EDS DPDT

Switch EDG/EDS SPST EDG/EDS DPST EDG/EDS SPDT EDG/EDS 3PST EDG/EDS 4PST EDG/EDS DPDT EDG/EDS SERIES SLIDE TYPE EDG/EDS SPST EDG/EDS DPST EDG/EDS SPDT EDG/EDS PST EDG/EDS 4PST EDG/EDS DPDT FETURES Tactile response is performed directly by larger contact pressure to ensure very stable contact.

More information

Features. Samples. I max (A) P d. typ. (W)

Features. Samples. I max (A) P d. typ. (W) 0805L Series RoHS Description The 0805L Series PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals

More information

SELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current

SELECTION GUIDE. Nominal Input Voltage. Output Voltage. Input Current. Input reflected ripple current SELECTION GUIDE FEATURES Patents pending Lower Profile UL9 Recognised ANSI/AAMI ES1-1 Recognised 3kVDC Isolation Hi Pot Test Substrate Embedded Transformer Automated Manufacture Industry Standard Footprint

More information

SMD TERMINAL BLOCKS. Small is Big!

SMD TERMINAL BLOCKS. Small is Big! SMD TERMINAL BLOCKS Small is Big! SMD TERMINAL BLOCKS A compact and low-profile PCB connection is required to achieve the most uniform light distribution, while minimizing shadowing. WAGO s surface-mount

More information

AZ8521. ZETTLER electronics GmbH DPDT SUBMINIATURE SIGNAL RELAY

AZ8521. ZETTLER electronics GmbH DPDT SUBMINIATURE SIGNAL RELAY Z8521 DPDT SUMINITURE SIGNL RELY FETURES SMT and THT mounting available High dielectric and surge voltage: 2.5 kv surge (per ellcore T-NWT-001089) 1.5 kv surge (per FCC Part 68) 1,000 Vrms, open contacts

More information

PTC Thermistor for Automotive:TPM-C Series

PTC Thermistor for Automotive:TPM-C Series Features 1. Qualification based on AEC-Q200 Rev-C 2. RoHS & Halogen-free compliant 3. EIA size 0603,0805 4. Fast and reliable response Recommended Applications 1. Automotive electronics Part Number Code

More information

7000 SERIES ROCKER AND PADDLE SWITCHES Overview

7000 SERIES ROCKER AND PADDLE SWITCHES Overview Overview 7 SERIES Number of poles Terminals 3 Single pole 4 Double pole onsult factory for three and four pole models. Blank W WW Y } Y4 } Y6 } Y7 } Z Solder lugs or straight P depending on model Right

More information

KSB & KSF Series Low-profile Tact Switch

KSB & KSF Series Low-profile Tact Switch KS & KSF Series Low-profile Tact Switch Features/enefits Low profile Protected against flux KS without top sealing KSF with top sealing RoHS compliant and compatible Typical Applications Low profile keyboards

More information

Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. C&K ET Series Sealed Subminiature Switches Features/Benefits Sealed against

More information

POLY-FUSE Resettable PTCs. 2920L Series. Surface Mount > 2920L Series E R RoHS. Description

POLY-FUSE Resettable PTCs. 2920L Series. Surface Mount > 2920L Series E R RoHS. Description 2920L Series RoHS Description The 2920L Series PTC provides surface mount overcurrent protection for medium voltage ( 60V applications where resettable protection is desired. Features RoHS compliant, lead-free

More information

IR series Sealed pushbutton switches - bushing Ø 16 mm - momentary

IR series Sealed pushbutton switches - bushing Ø 16 mm - momentary Sealed pushbutton switches - bushing Ø 16 mm - momentary Distinctive features The IR series is a range of sealed momentary pushbutton switches with dia. 16 mm bushing. This series is divided into 2 families

More information

C&K ET Series Sealed Subminiature Rocker Switches

C&K ET Series Sealed Subminiature Rocker Switches Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoS compliant Typical Applications Telecommunications Instrumentation Computers

More information

Features. V max (Vdc) I max (A) typ. (W) P d

Features. V max (Vdc) I max (A) typ. (W) P d 2016L Series RoHS Description The 2016L Series PTC provides surface mount overcurrent protection for low voltage ( 60V applications where resettable protection is desired. Features RoHS compliant, lead-free

More information

2920L Series. POLY-FUSE Resettable PTCs. Surface Mount > 2920L Series. Description

2920L Series. POLY-FUSE Resettable PTCs. Surface Mount > 2920L Series. Description RoHS Description The PTC provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free

More information

T Series Subminiature Toggle Switches

T Series Subminiature Toggle Switches Models vailable Features/Benefits Compact size small footprint Single and double pole models PC and panel mount options available Typical pplications Hand-held telecommunications Instrumentation Medical

More information

2600 SERIES ILLUMINATED AND NON-ILLUMINATED ROCKER SWITCHES Overview

2600 SERIES ILLUMINATED AND NON-ILLUMINATED ROCKER SWITCHES Overview Overview 6 SERIES Electrical functions Frame type 1 ON - OFF 4 ON ON ON MOM - ON 6 ON - ON 7 MOM OFF MOM 8 ON OFF MOM 9 ON OFF ON double pole only LH LP Plain With protection guard Number of poles Special

More information

PTC Thermistor for Automotive:TPM-C Series

PTC Thermistor for Automotive:TPM-C Series SMD PTC Thermistor for Features 1. Qualification based on AEC-Q200 Rev-C 2. RoHS & Halogen-free compliant 3. EIA size 0603,0805 4. Fast and reliable response Recommended Applications 1. Automotive electronics

More information

Momentary pushbutton switches - round plunger

Momentary pushbutton switches - round plunger 1200 series Momentary pushbutton switches - round plunger Distinctive features and specifications Butt action contacts, double break NF (EN 61058-1), UL and CSA approved ELECTRICAL SPECIFICATIONS Max.

More information

RI-80 SMDH Series Housed Dry Reed Switch

RI-80 SMDH Series Housed Dry Reed Switch formerly RI-80 SMDH Series Housed Dry Reed Switch RI-80 SMDH Series Ultra-micro dry-reed switch hermetically sealed in a gas-filled glass envelope. Single-pole, single-throw (SPST) type, having normally

More information

APPLICATION NOTE. Package Considerations. Board Mounting Considerations. Littelfuse.com

APPLICATION NOTE. Package Considerations. Board Mounting Considerations. Littelfuse.com package. Compared to products in plastic molded packages, the SESD device offers a significant performance-per-boardarea advantage. The SESD package and a dimensional view of the package bottom are shown

More information

C&K 7000 Series Miniature Toggle Switches

C&K 7000 Series Miniature Toggle Switches Miniature Switches Models vailable Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical

More information

C&K ET Series Sealed Subminiature Rocker Switches

C&K ET Series Sealed Subminiature Rocker Switches Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space Typical Applications Telecommunications Instrumentation

More information

IL series Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary

IL series Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary Distinctive features and specifications Momentary pushbuttons for thick panels Illuminated or non-illuminated Tactile feedback Flat round actuator for optional marking Sealed to IP67 ENVIRONMENTAL SPECIFICATIONS

More information

MicroMate (MMCX) Amphenol Specifications

MicroMate (MMCX) Amphenol Specifications Specifications ELECTRICAL CECC22000 Test Requirement Impedance 50 Ohm Frequency Range DC thru 6 GHz VSWR 4.4.1 SMT and Edgecard (Mated Pair) DC - 4 GHz 1.15 Max 4-6 GHz 1.40 Max Cabled Straight, Semi-Rigid

More information

Surface Mount > 1812L Series. Description. Features. Applications. I max (A) typ. (W) P d. Current (A)

Surface Mount > 1812L Series. Description. Features. Applications. I max (A) typ. (W) P d. Current (A) 1812L Series RoHS Description The 1812L Series PTC provides surface mount overcurrent protection for applications where resettable protection is desired. Features RoHS compliant, lead-free and halogen-free

More information

Multilayer Acrylic Polymer Film Capacitors

Multilayer Acrylic Polymer Film Capacitors FEATURES HIGH CAPACITANCE (UP TO 22μF) WIDE VOLTAGE & TEMPERATURE RANGE (16 ~ 100V, -55 C ~ +125 C or ±105 C) UPGRADE PERFORMANCE VS. MLCC's STABLE OVER FREQUENCY, TEMPERATURE & VOLTAGE NO PIEZO ELECTRIC

More information

CIT SWITCHTM ANT SPECIFICATIONS

CIT SWITCHTM ANT SPECIFICATIONS Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability

More information

Indicator body round for raised full face, black plastic, 22.5 mm mounting. Part No For complete switch also order

Indicator body round for raised full face, black plastic, 22.5 mm mounting. Part No For complete switch also order Series 14.5 mm 0.5 mm IP67 5 50 V INDITOR pushbutton keylock selector buzzer hoose one component from each of the coloured sections to assemble a complete switch. Product Profile Indicator The Series 14

More information

1000 Series Miniature Slide Switches

1000 Series Miniature Slide Switches Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &

More information

Low profile Fast response to fault current Compatible with high temperature solders

Low profile Fast response to fault current Compatible with high temperature solders Description The 0805 series provides miniature surface mount resettable overcurrent protection with holding current from 0.1A to 1.1A. This series is suitable for ultra portable applications where space

More information

Power rocker switches

Power rocker switches Distinctive features and specifications Protected rocker Illuminated or nonilluminated VDE (EN 08) approved Sealed to IP ELETRIL SPEIFITIONS urrrent/voltage rating : functions (ONOFF) and (ONON) : VD,

More information

7000 Series Miniature Toggle Switches

7000 Series Miniature Toggle Switches Models vailable Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical pplications Telecommunications

More information

Selection guide - Section B1 «I» range

Selection guide - Section B1 «I» range Selection guide - Section «I» range New! New! New! New! New! New! Series IC IL IM IP IB-IS IHS IHL IQ mom. & latching hall effect hall effect momentary Page -2-6 -11-15 -25-29 -32-35 Poles 1 1 1 1 1 1

More information

POLYFUSE Resettable PTCs Surface Mount > 2920L Series

POLYFUSE Resettable PTCs Surface Mount > 2920L Series Surface Mount > Description The device provides surface mount overcurrent protection for medium voltage ( 60V) applications where resettable protection is desired. Features Agency Approvals AGENCY AGENCY

More information

T80-T Miniature Toggle Switches Compliant

T80-T Miniature Toggle Switches Compliant T80-T Miniature Toggle Switches Compliant TCT DIP PUSH BUTT SLIDE SPECIFICTIS CTCT RTING: @ VC or 8 VDC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full load CTCT RESISTNCE: 0 m max. initial

More information

M Series Half-inch Rotary Switches

M Series Half-inch Rotary Switches Half-inch Switches Features/Benefits Multi-pole and multi-positions Panel and PCB mounting Stainless steel actuator Non-shorting contacts RoHS Compliant IP67 (F option only) Typical Applications Test equipment

More information

The ASPIAIG-F series of molded smd power inductors come in a variety of package sizes. The series supports current handling up TOLERANCE M: ±20%

The ASPIAIG-F series of molded smd power inductors come in a variety of package sizes. The series supports current handling up TOLERANCE M: ±20% SERIES DESCRIPTION The SPIIG-F series of molded smd power inductors come in a variety of package sizes. The series supports current handling up FETURES PPLICTIONS PPP ready and supported Excellent current

More information

PolySwitch Resettable PTCs Surface Mount > LoRho Series. Low Rho SMD Series. Description

PolySwitch Resettable PTCs Surface Mount > LoRho Series. Low Rho SMD Series. Description Low Rho SMD Series Description PolySwitch low resistivity SMD (surface-mount device) is a versatile device well suited for general applications which have space-constrained, low power dissipation and high

More information

Features. P d typ. (W) I max (A) 1206L012 A X X 1206L016 B

Features. P d typ. (W) I max (A) 1206L012 A X X 1206L016 B RoHS Description The PTC provides surface mount overcurrent protection for applications where space is at a premium and resettable protection is desired. Features Agency Approvals AGENCY AGENCY FILE NUMBER

More information

C&K 1000 Series Miniature Slide Switches

C&K 1000 Series Miniature Slide Switches Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &

More information