TP Series, Tiny. Features. Pushbutton Switches. Pushbutton Switches
|
|
|
- Esmond Norton
- 5 years ago
- Views:
Transcription
1 TP Series, Tiny Features Compact design Round or rectangular actuator buttons. Vertical or versions Typical performance characteristics Contact configuration SPST, SPDT, DPDT Contact timing Break-Before-Make Contact rating max gold: or peak AC silver: VAC or 8 VDC resistive Electrical life pole.. pole gold , ,000 cycles silver.... 0, ,000 cycles Contact resistance, initial max.0 mohms Insulation resistance ,000 00VDC Dielectric strength ,000 Volts sea level Actuation force to N (0-00gf) Actuator travel momentary (.7) Environmental specification Operating temperature C to + C Storage temperature C to + C Solder heat resistance wave solder capable to C Material specifications Contacts copper or brass, gold over nickel finish or silver clad with silver over nickel finish Actuator thermoplastic Terminals brass with gold over nickel or silver over nickel Case thermoplastic Frame and support bracket steel with tin over copper finish RoHS Directive 00/9/EC compliant Product key Typical product key TP A C G PC 0 0 Type TP Tiny pushbutton series Bushing blank square, no bushing A round, no bushing B round.88 (.78) dia. bushing not threaded C round 0/8 UNS B thread D.0 (.) dia. bushing, not threaded F round /-0 UNS B thread Actuator blank standard F flush (available with B and C bushings only) Number of Poles single pole double pole Contact rating 0.VA Gold.0 A Silver (Silver available only in wire lug and PC termination) Function single pole double pole C single throw, momentary M single throw, momentary F double throw, momentary R double throw, momentary CC dual function C - x single throw, momentary FF dual function F - x double throw, momentary Plating G Gold blank Silver (Silver available only in wire lug and PC termination) Terminals blank wire lug RA PC VRA vertical, (available only in single pole) Button Color 0 black red blue Material 0 RoHS compliant D Catalogue No Issued 09/008
2 Bushing blank, square, no bushing Single pole TPCGPC00 TPCCGPC00 Single pole (.0) x Single pole (dual).0 (.0).0 (.80).0 (.8) (.00).0 (.8). (.7). (.7). (.7) (7.) (.70).0 (9.).0 (.) on C and M function switch TPCGRA00 x Single pole (dual).0 (.8) (.00). (.9). (.7)..0 (.) on C and M function switch TPCCGRA00.8 (9.7) (.0) (.0). (.9).0 (9.) A, Round, no bushing Single pole TPACGPC00.0(.) 0 x Single pole (dual).0(.).0 (.0).0 (.8).0 (.).0 (.).0 (.8).0 (9.).0 (.) (7.) Catalogue No Issued 09/008 D7
3 Single pole.0 (.8) (.70).0 (.)..0 (.) TPACGRA0 x Single pole (dual).0 (.). (.9).0 (.8) B, Round.88 (.78) dia. bushing not threaded TPBCGPC00.7 (.7).0 (.)..8 (.7).0 (.0) (.0).0 (.9).7 (.8). (.9).0.8 (9.7).0 (9.).0 (.) TPBMGPC00..7 (.7).8 (.7).7 (.8)..0 (.9).0 (9.) s on M function switch TPBCGRA00.8 (.7)..7 (.7).7 (.8)..0 (.9). (.)..0 (.) TPBMGRA00..8 (.7).7 (.7).0.7 (.9) (.8).0 (.).0.8 (9.70).0 (9.) s on M function switch D8 Catalogue No Issued 09/008
4 vertical TPBFGVRA00.07 (.).8 (.7).7 (.7). (.9).7 (.8).07 (.87). (9.0).0 (.).0 (.)., flush actuator TPBFFGPC00 (.00).0 (.0).90 (.80).0 (.0).0 (8.0).0 (.0) (8.0), flush actuator TPBFCGRA00..7 (.7).8 (.7).0 (.9).0.0 (.0).0 (.80).0 (.0) (8.0) C, Round 0/8 UNS B thread TPCM wire lug TPCC.7 (.7).7 (.8). (.9) 0-8 UNS-B.0.0 (.79).00 W. x L. (.00 W. x.00 L.) OBLONG HOLE.0 (.).80 (7.).078 (.00).0 (.0) on C and M function switch.0 (9.).9 (.9).90 (.8).7 (.7) TPCFGPC.7 (.7).0 (.9).0 (.9).0.0 (.) 0-8 UNS-A.7 (.8) Catalogue No Issued 09/008 D9
5 TPCRGPC.7 (.7).7 (.8).0. (.7) 0-8 UNS-A.0 (9.) s on M function switch TPCCGRA TPCMGRA.7 (.7).7 (.7). (.7).0.7 (.8). 0-8 UNS-A. (.).7 (.8) 0-8 UNS-A.0 (.).0.0 (.9).8 (9.70).0 (.).0 (9.) s on M function switch vertical.07 (.).7 (.7).8 (.7).7 (.8). (9.0).0 (.9).07 (.87) 0-8 UNS-A.0 (.).0 (.). TPCFC wire lug, flush actuator.7 (.7).0.0 (8.0) (.0).0 (.80) 0-8 UNS-A.00 W. x L. (.00 W. x.00 L.) OBLONG HOLE.0 (.0).0 (.0) (.00) (8.0).9 (.9).08 (.08), flush actuator TPCFCGPC.7 (.7).0 (.0) 0-8 UNS-A.0 (8.0).0 (.0) (8.0) D0 Catalogue No Issued 09/008
6 , flush actuator..7 (.7).0 (.0) 0-8 UNS-A.0.0 (.0).0 (.80).0 (.0) (8.0).0 (. T D,.0 (.) dia. bushing, not threaded TPDCGPC. (.)..8 (.0). (.).0 (7.87).0.0 (.).8 (7.) T. TPDMGPC. (.)..8 (.0). (.).0 (7.87).0.9. (.0) s on M function switch TPDCGRA.. (.).8 (.0).0 (7.87).. (.) (.).0 (.7). (8.0).8 (7.).0 (.) TPDMGPC. (.)..8 (.0). (.).0 (7.87).0.9. (.0) s on M function switch Catalogue No Issued 09/008 D
7 F, Round /-0 UNS B thread wire lug TPFM TPFC..0 (.0). (.) Dp. x.00 W. (0. Dp x.0 W.).0 (7.90).0 (8.0).0 (.80) (.0) TYP /-0.00 W. x L. (.00 W. x.00 L.) OBLONG HOLE TYP.0 (.0).8 (7.) (.00) (8.0).0 (.0).0 (9.0). (.).90 (.).0 (0.89).0 (.8).7 (.77) on C and M function switch. Dp. X.00 W. (0. Dp. X (.00) W.) KEYWAY. (.).8 (.0). (7.90) /-0 UNS-A.0 (8.0).0 (.).8 (7.) T...8 (.0). Dp. X.00 W. (.) (0. Dp. X (.00) W.) /-0 KEYWAY UNS-A..0 (7.90) s on M function switch.9. (.0) TPFCGRA.. (.).0 Dp. X.00 W. (0. Dp. X (.0) W.) KEYWAY.8 (.0) /-0 UNS-A. (7.90)..0.0 (.0). (8.0).8 (7.).0 (.) TPFMGRA. Dp. X.00 W. (0. Dp. X (.0) W.) KEYWAY.0 (.0).0.0 (7.87). (.).0 /-0 (.) UNS-A.80 (9.) s on M function switch.0 (9.) D Catalogue No Issued 09/008
8 Product key Bushing Act. Poles Rating Function Plating Terminals Btn. Material Part Number TPCGPC00 square n/a 0.VA Off-(On) Off - Gold pcb black RoHS 809- TPCGPC0 no bushing red compliant 809- TPCGRA00 black 809- TPCGRA0 red 809- TPCGRA0 blue 809- TPFGPC00 On-(On) - - pcb black 809- TPFGPC0 red TPFGRA00 black TPFGRA0 red TPFGRA0 blue TPCCGRA00 (+) Off-(On) Off - black TPCCGRA0 red TPFFGRA00 On-(On) - - black TPACGPC00 round Off-(On) Off - pcb 809- TPACGPC0 no bushing red 809- TPACGPC0 blue 809- TPACGRA00 black 809- TPACGRA0 red 809- TPACGRA0 blue 809- TPAFGPC00 On-(On) - - pcb black TPAFGPC0 red TPAFGPC0 blue TPAFGRA00 black TPAFGRA0 red TPAFGRA0 blue TPACCGPC00 (+) Off-(On) Off -, - pcb black TPACCGRA TPAFFGRA0 On-(On) -, - -, - red TPAMGRA00 Off-(On) Off -, - black TPBCGPC00 round std - pcb TPBCGPC0.88 (.78) red TPBCGRA00 dia black TPBCGRA0 bushing, red TPBCGVRA00 not vertical r.a. black TPBFGPC00 threaded On-(On) - - pcb TPBFGRA TPBFGRA0 red TPBFGRA0 blue TPBFGVRA00 vertical r.a. black TPBMGPC00 Off-(On) Off -, - pcb TPBMGPC0 red TPBMGRA00 black TPBRGRA00 On-(On) -, - -, TPBRGRA0EDC0 8- TPBFCGRA00 flush Off-(On) Off TPBFFGRA00 On-(On) TPBFFGRA0 red Preferred parts in bold print Catalogue No Issued 09/008 D
9 Product key Bushing Act. Poles Rating Function Plating Terminals Btn. Material Part Number TPCCGPC00 round std 0.VA Off-(On) Off - Gold pcb black RoHS TPCCGRA00 0/8 compliant TPCCGRA0 UNS B red TPCCGVRA00 thread vertical r.a. black TPCFGPC00 On-(On) - - pcb TPCFGRA TPCFGVRA00 vertical r.a TPCFGVRA0 red TPCC00.0 A Off-(On) Off - Silver wire lug black TPCC0 red TPCCPC00 pcb black TPCF00 On-(On) - - wire lug TPCMGRA0 0.VA Off-(On) Off -, - Gold red TPCRGPC00 On-(On) -, - -, - pcb black TPCM00.0 A Off-(On) Off -, - Silver wire lug TPCR0 On-(On) -, - -, - red TPCFCGPC00 flush 0.VA Off-(On) Off - Gold pcb black TPCFCGRA TPCFFGRA00 On-(On) TPCFC00.0 A Off-(On) Off - Silver wire lug TPCFF00 On-(On) TPDCGPC00.9 (.) n/a 0.VA Off-(On) Off - Gold pcb TPDCGPC0 dia red TPDCGRA00 bushing, black TPDCGRA0 not red TPDCGRA0 threaded blue TPDFGPC00 On-(On) - - pcb black TPDFGRA TPDFGRA0 red TPDMGRA00 Off-(On) Off -, - black TPDRGPC00 On-(On) -, - -, - pcb TPFCGPC00 round Off-(On) Off TPFCGPC0 /-0 red 800- TPFCGRA00 UNS B black 800- TPFCGRA0 thread red 800- TPFCGRA0 blue 800- TPFFGPC00 On-(On) - - pcb black TPFFGPC0 red TPFFGPC0 blue TPFFGRA00 black TPFC00.0 A Off-(On) Off - Silver wire lug TPFC0 red TPFF0 On-(On) TPFF0 blue TPFMGPC00 0.VA Off-(On) Off -, - Gold pcb black TPFRGRA00 On-(On) -, - -, TPFM00.0 A Off-(On) Off -, - Silver wire lug D Catalogue No Issued 09/008
Pushbutton Switches Sub-Miniature
Pushbutton Switches Specifications: Contact rating Mechanical life Maximum contact resistance Minimum insulation resistance Dielectric strength Operating temperature Materials: Case Plunger Bushing Housing
Product Range. Keylock Switches. Keylock Switches. Keylock Switches
Product Range Medium Security : 2SWK, SKF Series High Security : SWK Series Main features: SPST type - 5 disc tumbler versions SPST type - 8 disc tumbler versions DPDT type - 4 disc tumbler versions All
Product Range. Rocker & Paddle Switches. Rocker & Paddle Switches. Rocker & Paddle Switches
Product Range for Panel Mounting: F, TRD and Gemini Series for PCB Mounting: Gemini Series Main features: Sealed or unsealed versions Various switch functions Gold or silver contacts LED illumination available
CIT SWITCHTM ANT SPECIFICATIONS
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
ANT. Materials. Features. Miniature Toggle
Specificationscations RoHS Compliant ANT Electrical Ratings Electrical Life Contact Resistance 5A @ 0VAC, 8VDC A @ 50VAC See Contact Options 50,000 cycles typical
ANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
Snap Action Miniature Pushbutton Switches
Snap Action Miniature Switches SERIES 38C Miniature Switches FEATURES and Circuitry Choice of Bushings, and Terminations Caps and Frames Available UL Recoginized DIMENSIONS IN INCHES (AND MILLIMETERS)
Series 300. Miniature Rocker & Paddle Switches
Series 00 SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 0,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. inital @ -VDC. 00mA for both
1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
T Series Subminiature Toggle Switches
eatures/benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation
Security Switches. Anti Vandal, Pushbutton. Specifications. Specifications S76 S77. Features.748 (19mm) bushing diameter
Anti Vandal, Pushbutton S76.287 (7.3) c: Screw (Assembled).098 (2.5) Typ.142 (3.6) Type Circuitry Action Actuator g 54 377 SPST NO OFF (ON) Stainless Steel, Flat S76b 54 378 SPST NO OFF (ON) Stainless
C&K 1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
SERIES 100 SWITCHES TOGGLE SWITCHES - MINIATURE. Phone: Fax: SPECIFICATIONS MATERIALS
TACT SERIES 100 - MINIATURE SPECIFICATIONS Contact Rating: Life Expectancy: Contact Resistance: Insulation Resistance: Dielectric Strength: See contact material options 40,000 make-and-break cycles at
9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview
A 9000 SERIES Overview 9 SERIES Number of poles 3 Single pole Electrical functions 2 Normally closed (NC) 3 Normally open (NO) Terminals, case and bushing Case height 8 (.314) 2 Straight terminals - threaded
SPECIFICATIONS MATERIALS. NONE = Black WHT= White RED = Red M1 M3 M5. YEL = Yellow. GRY = Gray PUR = Purple. **Contact E-Switch for additional colors
SERIES 300 AND PADDLE - MINIATURE FEATURES & BENEFITS Multiple rocker & paddle options Up to 4 poles Multiple termination options Snap-in panel mount option available HOW TO ORDER APPLICATIONS/MARKETS
E Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available
8500 Series Subminiature Pushbutton Switches
Subminiature Switches Features/Benefits Pre-travel or over-travel models available Ratings up to 3 AMPS Reliable contact design RoHS compliant Typical Applications Detection Telecommunications and networking
E Series Sealed Miniature Rocker and Lever Handle Switches
Sealed Miniature and Lever Handle Switches Features/Benefits Sealed against solder and cleaning process contaminants ESD Resistance all actuator options, case & bushing UL 94V-0 RoHS compliant Typical
C&K ET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space Typical Applications Telecommunications Instrumentation
MINIATURE SWITCHES. Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action)
Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action) MINIATURE SWITCHES PS SERIES 5 AMP. (S.P.) 1 AMP (D.P.) 0.4 VA DIRECT PANEL MOUNT Basic P/N Terminal Type Poles Cap
ET Series Sealed Subminiature Rocker Switches
ET Series Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications Instrumentation
7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant Typical Applications Telecommunications
ET Series Sealed Subminiature Rocker Switches
Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications Instrumentation Computers
7000 Series Miniature Rocker & Lever Handle Switches
Miniature & Lever Handle Switches Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS compliant
SPECIFICATIONS: MATERIALS: If your preferred product configuration is not shown, please contact our sales representative for custom design.
SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 50,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. initial @2-4VDC 00mA for both silver
Quick Reference Guide Green Pushbutton and Toggle Series Switches
Quick Reference Guide Green Pushbutton and Toggle Series Switches The Green Series switch offering includes both pushbutton and toggle switches all rated to 6A/3A@125/250VAC and 4A@28VDC. The life expectancy
C&K T Series Subminiature Toggle Switches
Features/Benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation
ET Series Sealed Subminiature Rocker Switches
Sealed Subminiature Switches Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoHS compliant Typical Applications Telecommunications
Series R19. Power Rocker Switches MARK OPTIONS COLOR OPTIONS TERMINATION OPTIONS HOW TO ORDER
CONTACT RATING: 6A 250VAC 10A 125VAC. ELECTRICAL LIFE: 10,000 Operations. MECHANICAL LIFE: 50,000 Operations. CONTACT RESISTANCE: 1,000M-ohms. DIELECTRIC STRENGTHS: >1,500
C&K ET Series Sealed Subminiature Rocker Switches
Features/Benefits Sealed against solder and cleaning process contaminants, bushing & case UL 94V-0 Small footprint saves space RoS compliant Typical Applications Telecommunications Instrumentation Computers
C&K E Series Sealed Miniature Toggle Switches
Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available Typical Applications Telecommunications
RTA Series 1 4 Poles Coded Rotary Switches
1 4 Poles Coded Switches Features/Benefits PCB or hand soldering versions Bushing mounting Multiple poles Decimal and hexadecimal codes Screwdriver slot or extended actuator RoHS Compliant Typical Applications
Series LP. Illuminated Pushbutton Switches HOW TO ORDER SPECIFICATIONS: WPL-25
SPECIFICATIONS: CONTACT: Silver contact (Gold plated). ELECTRICAL RATING: AC125, 2V 1A @ resistive load). INSULATION RESISTANCE: More than Mohms at DC 0V. DIELECTRIC STRENGTH: a. 0V RMS(/60Hz) between
C&K E Series Sealed Miniature Toggle Switches
Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical Applications Telecommunications
Momentary or alternate action pushbutton switches. UL approved 3A 250VAC, 6A 125VAC. Availability : consult factory for details of approved models.
Distinctive features and specifications Bushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 4A 30VDC - gold
2M Series Sub-Miniature Toggle Switches
M Series Sub-Miniature Toggle Switches SPECIFICATIS CTACT RATING: Dependent upon contact material See Page 8. MECHANICAL LIFE: 0,000 make-and-break cycles. CTACT RESISTANCE: 0 m max. initial @ -VDC 00mA
7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoS compliant Typical Applications Telecommunications
Distinctive Characteristics
Distinctive Characteristics Various cap styles and colors to meet differing application needs. Bright, full face illumination to distinctively indicate status. Rear panel threaded mounting or snap-in mounter
7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
onlinecomponents.com
eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available Typical Applications
8020 Series Snap-acting Momentary Pushbutton Switches
Snap-acting Momentary Switches Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS compliant
C&K 7000 Series Miniature Rocker & Lever Handle Switches
Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical Applications Telecommunications Instrumentation
7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
.410 (10.41) 1/4-40 UNS-2A Ø.115 (Ø 2.92) .410 (10.41) Ø.115 (Ø 2.92) Ø.115 (Ø 2.92)
Series A: Miniature Switches Series A Miniature Switches FEATURES Save Space and Weight,, PDT, and DPT Circuitry Choice of Actuators, Bushings and Terminations UL Recognized Models In inches (and millimeters)
M Series Half-inch Rotary Switches
Half-inch Switches Features/Benefits Multi-pole and multi-positions Panel and PCB mounting Stainless steel actuator Non-shorting contacts RoHS Compliant IP67 (F option only) Typical Applications Test equipment
SPDT DPDT 3PDT 4PDT SWITCHES TACT POS 1 POS 2 POS 3. Model No.
SCHEMATIC 3 2 1 Model No. SP-1 ON NONE ON SP-2 ON NONE (ON) SP-3 ON OFF ON SP-4 (ON) OFF (ON) SP-5 ON OFF (ON) Term. Comm. 2-3 OPEN 2-1 ( ) = Momentary 6 5 4 3 2 1 Model No. DP-1 ON NONE ON DP-2 ON NONE
RTBH Series 1-2 Pole Coded Rotary Switches
RTBH Series 1-2 Pole Coded Switches Features/Benefits Totally sealed Detent angles, 15, 22.5, 30 and 36 Multi pole Coding functions Robust construction RoHS Compliant Typical Applications Telecommunications
8000 series Momentary or alternate action pushbutton switches
Distinctive features and specifications ushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 3A 250VAC - 6A
Rotary Switches Product Selection Guide
Switches Product Selection Guide Series A RTA M R F H RW RM ENC Switch Type Multi-pole/ Multi-position Multi-pole/ Multi-position Half-inch Rota-slide Rota-slide Power Rota-slide Subminiature SMT Subminiature
MINIATURE SWITCHES. Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action)
Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action) MINIATURE SWITCHES PS SERIES 5 AMP. (S.P.) 1 AMP (D.P.) 0.4 VA DIRECT PANEL MOUNT ONE POLE TWO POLE Basic P/N Terminal
S E C Q - E - S T 1-2. Cap/ Sealing Hood (STD) 8.89 B solder lug Q (none) (none) Rubber Hood
T 8 0 1 3 - S E C Q - E - S 2 0 - T 1-2 Switch Function (SPDT) Actuator Bushing Termination Contact Switching Position Model No. S 10.41 E Epoxy Seal Vertical Support Bracket Cap/ Sealing Hood (STD) 8.89
C&K 8020 Series Snap-acting Momentary Pushbutton Switches
Features/Benefits Positive tactile feel Multi-positions available Wide variety of termination options Epoxy terminal seal compatible with bottom wash cleaning RoHS complient models available Typical pplications
.570 (14.48).415 (10.54) Ø.115 (Ø 2.92) .410 (10.41) Ø.115 (Ø 2.92) Ø.115 (Ø 2.92)
Series A: Miniature Toggle Switches SERIES A Miniature Toggle Switches FEATURES Save Space and Weight,, PDT, and DPT Circuitry Choice of Actuators, Bushings and Terminations UL Recognized Toggle Switches
ET Series Sealed Subminiature Toggle Switches
Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact size and small footprint save PCB
TP Series Tiny Pushbutton Switches
Tiny Switches Features/Benefits Subminiature size capable of switching 1 MP Vertical & right angle terminations PC & panel mount models Snap-in front panel mounting available Epoxy terminal seal-compatible
G Series Instrument Grade Miniature Slide Switches
SPCIFICATIONS Contact ratings: Gold; 0.4 Volt-Amps (VA) max. at 20 V max. (AC or DC) Silver; 4 A at 125 VAC,2 A at 250 VAC or 3 A at 30 VDC Initial contact resistance: 10 milliohms max. Insulation resistance:
ELECTRICAL SPECIFICATIONS
Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for
Series 47B: Sealed Miniature Rocker and Paddle Switches
Series 7B: Sealed Miniature and Paddle Switches SERIES 7B Sealed Miniature and Paddle Switches FEATURES Save Space and Weight, and PDT Circuitry Choice of Actuators and Terminations Sealed per IP-7 DIP
8060 Series Alternate Action and Momentary Pushbutton Switches
lternate ction and Momentary Switches Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available
8060 Series Alternate Action and Momentary Pushbutton Switches
Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available Typical pplications Instrumentation Computers
2SS/2S1/2SM SUB-MINIATURE TOGGLES
2SS/2S1/2SM 2S-Series SUB-MINIATURE TOGGLES The 2S family of sub-miniature toggle switches is composed of three switch series; the 2S1-Series toggle switch, the 2SS-Series sealed toggle switch, and the
8000 series. Momentary or alternate action pushbutton switches DISTINCTIVE FEATURES ELECTRICAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS
SW-8000-808 DISTINCTIVE FEATURES Momentary or alternate Bushing Ø 6.35 (/4) and Ø.9 (5/3) UL approved ELECTRICAL SPECIFICATIS Max. current/voltage rating with resistive load : - silver contacts : 4 A 30
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. C&K ET Series Sealed Subminiature Switches Features/Benefits Sealed against
Momentary pushbutton switches - round plunger
1200 series Momentary pushbutton switches - round plunger Distinctive features and specifications Butt action contacts, double break NF (EN 61058-1), UL and CSA approved ELECTRICAL SPECIFICATIONS Max.
C&K 8020 Series Snap-acting Momentary Pushbutton Switches
Snap-acting Momentary Switches Models Available Features/enefits Positive tactile feel Multi-positions available Wide variety of termination options Typical Applications Instrumentation Computer peripherals
A Series 1-4 Pole Rotary Switches
1-4 Pole Switches Features/Benefits Multi-pole and multi-position Positive detent Shorting & non-shorting contacts Panel and PCB mounting RoHS Compliant Typical Applications Automotive Major and small
Two case lengths. Three electrical functions. Sealing options. Model X1146 with Ø 16 (.630) bushing ELECTRICAL SPECIFICATIONS.
Distinctive features and specifications Two case lengths Three electrical functions Sealing options Model X1146 with Ø 16 (.630) bushing Max. current/voltage rating with resistive load : - silver contact
C&K 7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical Applications Telecommunications
Series 206/208 Through-Hole DIP Switch
Available with SPST, SPDT, DPST, 3PST circuitry choices Available with low profile, standard, or extended actuator heights. Consult the ordering information for options. RoHS compliant Optional top tape
5000 SERIES TOGGLE SWITCHES Distinctive features B
5000 SERES TOGGLE SWTCHES Distinctive features THE WDEST RANGE N MNATURE SWTCHES 7 7 actuators including toggles, paddle levers and locking levers in different lengths. 5 5 contact materials from dry circuit
18000 series Snap-action momentary pushbutton switches
Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for
Distributed by: www.jameco.com 1-800-831-4242 The content and copyrights of the attached material are the property of its owner. Features/Benefits Multi-pole and multi-position Positive detent Shorting
SERIES SINGLE AND DOUBLE-POLE ROCKER SWITCHES
TO 1 (4) A 50 V AC PRODUCT FEATURES 100 million times proven switching principle High, fl exible design variety Excellent actuating characteristic Illuminated and non-illuminated variants ON REQUEST Other
Toggles Product Selection Guide
s Product Selection Guide s Series 7000 Military E ET T GT 9000 Switch Type Miniature Miniature Miniature Subminiature Subminiature Ultraminiature Power Poles/Throws,, 3PDT, 4PDT,,,, 3PDT SPST,, SPST,,
Series WP. Pushbutton Switches HOW TO ORDER. Toggle Rocker Slide Pushbutton AV Rotary Tact Touch Key Miscellaneous
RATING: AC125V 7A, AC250V 4A. CIRCUIT: DPDT. CONTACT RESISTANCE: 20m-ohms max. @ 5VDC 1A. DIELECTRIC STRENGTH: AC 1,500V for 1 min. LIFE EXPECTANCY: 6-10 cycle / min. ELECTRICAL LIFE: 6,000 cycle. OPERATING
Distinctive Characteristics
Distinctive Characteristics Full face or spot illumination with incandescent lamps or multi-element LEDs, with or without resistors. Short Body Pushbuttons Series YB Choice of super bright LEDs in white,
Distinctive Characteristics
Distinctive Characteristics Wide selection of illumination effects is achieved with single and bicolor, - or -element LEDs, in flat, beveled, or sculptured caps. LED colors include red, amber, green, white,
DM Series Miniature 2 Pole Power Rocker Switches
Miniature 2 Pole Power Switches Features/Benefits AMPS to AMPS Quick connect terminals Double pole in miniature size Recessed bracket available prevents accidental actuation RoHS compliant Typical Applications
9000 Series Power Rocker and Lever Handle Switches
Power and Lever Handle Switches Features/Benefits Thermoset UL 94V-0 housing Rugged construction Variety of actuator and termination options RoHS compliant Typical Applications Small equipment Shut-off
8500 Series Subminiature Pushbutton Switches
8500 Series Features/Benefits Pre-travel or over-travel models available Ratings up to 3 MPS Reliable contact design RoHS compliant Typical pplications Detection Telecommunications and networking equipment
Rockers Product Selection Guide
s Product Selection Guide Series 7000 E ET T 9000 DA D Switch Type Subminiature Subminiature & Lever andle Poles/Throws,, 3PDT, 4PDT,, 3PDT,, DPST, Max. Current 5 Amps 7.5 Amps 3 Amps 3 Amps 4 Amps Washable
Distinctive Characteristics
Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. Antistatic superstructure, consisting of the carbon impregnated bushing and
Switches. SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY 115VAC, 28VDC)
SWITCH SELECTION GUIDE Toggle Switches SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive @ 115VAC, 28VDC) T1 2 or 3 Position, Momentary, 8A MIL-PRF-83731 15/32" or 1/4" dia.
EP Series Sealed Tiny Pushbutton Switches
Sealed Tiny Switches Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant
Distinctive Characteristics
Distinctive Characteristics ntirotation design, standard on noncylindrical levers, mates toggle and bushing; bottom of toggles has two flatted sides which fit into a complementary opening inside bushing.
Distinctive Characteristics
Distinctive Characteristics Carefully designed light diffusion and filtering system produce bright, full surface illumination with front panel relamping. Spot illumination available in single and bicolor
SP1-T100B1M1QE MINIATURE TOGGLE SWTH SPDT (RC)
DATA SHEET Order code Manufacturer code Description 75-0211 100-SP1-T100B1M1QE MINIATURE TOGGLE SWTH SPDT (RC) The enclosed information is believed to be correct, Information may change without notice
Switch EDG/EDS SPST EDG/EDS DPST EDG/EDS SPDT EDG/EDS 3PST EDG/EDS 4PST EDG/EDS DPDT
EDG/EDS SERIES SLIDE TYPE EDG/EDS SPST EDG/EDS DPST EDG/EDS SPDT EDG/EDS PST EDG/EDS 4PST EDG/EDS DPDT FETURES Tactile response is performed directly by larger contact pressure to ensure very stable contact.
Series 308 Electrical Specifications
Series 38 Potentiometer 1/2 in. sq..5 Watt Series 39 Potentiometer 1/2 in. sq. 1. Watt Description The Series 38 and 39 are high-performance, low-cost potentiometers. They are also available with S.P.S.T.
C&K 8060 Series Alternate Action and Momentary Pushbutton Switches
lternate ction and Momentary Switches Specifications CONTCT RTING: Q contact material: 6 MPS @ 120 V C or 28 V DC; 3 MPS @ 250 V C. See page -53 for additional ratings. ELECTRICL LIFE: 50,000 make-and-break
EP Series Sealed Tiny Pushbutton Switches
Features/Benefits Sealed against solder & cleaning processes Thru-hole and surface mount models Snap-fitting actuator accepts standard caps Tape & reel packaging available RoHS compliant models available
Miniature Toggle Switches
T80-T Miniature Toggle Switches Compliant D E L F R E E TCT DIP PUSH BUTT SLIDE ROCKER TOGGLE INDEX SPECIFICTIS CTCT RTING: @ VC or 8 VDC (Q contact) ELECTRICL LIFE:0,000 make-and-break cycles at full
We Make It Easy! 3. All of our switches are shipped complete, just as ordered. No incomplete or partial deliveries of subcomponents and accessories
We Make It Easy! 1. We assemble the parts for you saves you time and money. Includes LEDs and accessories 2. Easy to order all options and accessories displayed in easy-to-follow ordering table. No complicated
Kiosks. Body Finish Options. Actuator. Lens Color Options. Rating Options. Anodized 48VDC. 1 - Black Anodized. 7 - Blue 8 - Green 9 - Red.
Applications / Markets Audio / Visual Security Devices Industrial Controls Specifications Electrical Rating: 2A, 8VDC Mechanical Life: 200,000 Cycles Electrical Life: 50,000 Cycles Contact Resistance:
DM Series Miniature Illuminated Power Rocker Switches
Miniature Illuminated Power Switches Features/Benefits AMPS to AMPS Illuminated LED Positive detent RoHS compliant Typical Applications Instrumentation Industrial Office machines UL 658-1 Specifications
13000 series Professional quick-break momentary pushbutton switches
Distinctive features and specifications PC and panel mount models ushing Ø 6,35 (1/4) and 11,9 (15/32) UL and CECC approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : -
S and SF series Washable miniature toggle switches
S and SF series Washable miniature toggle switches Distinctive features and specifications Sealed Secure assembly of the two case parts Internally sealed bushing Epoxy sealed terminals Process compatible
Selection guide - Section B1 «I» range
Selection guide - Section «I» range New! New! New! New! New! New! Series IC IL IM IP IB-IS IHS IHL IQ mom. & latching hall effect hall effect momentary Page -2-6 -11-15 -25-29 -32-35 Poles 1 1 1 1 1 1
IL series Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary
Distinctive features and specifications Momentary pushbuttons for thick panels Illuminated or non-illuminated Tactile feedback Flat round actuator for optional marking Sealed to IP67 ENVIRONMENTAL SPECIFICATIONS
TYPICAL SWITCH ORDERING EXAMPLE. Contact Materials & Ratings. Silver Rated 125V AC & 250V AC Gold Rated 0.4VA 28V AC/DC max.
Large ushing Miniature Pushbuttons Series M000 S M Poles & ircuits 0 SPDT () 06 SPDT 06 DPDT () 08 DPDT 8 PDT () 8 PDT ( ) = Momentary Plunger Type TYPIL SWITH ORDERING EXMPLE 0 S W 0 D Plunger for Screw-on