Momentary pushbutton switches - round plunger

Size: px
Start display at page:

Download "Momentary pushbutton switches - round plunger"

Transcription

1 1200 series Momentary pushbutton switches - round plunger Distinctive features and specifications Butt action contacts, double break NF (EN ), UL and CSA approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts (A) : 4A 250VAC - 8A 125VAC - 4A 24VDC - 8A 12VDC - silver plated copper contacts. (C) : 2A 250VAC - 3A 125VAC 2A 24VDC - 3A 12VDC Initial contact resistance : 10 mω Insulation resistance : 0 MΩ min. at 500VDC Dielectric strength : Vrms 50 Hz min. between terminals Vrms 50 Hz min. between terminals and frame Electrical life : cycles at full load MATERIALS Case : polyamide Plunger : polyamide Bushing : brass, nickel plated Contacts : A : silver C : copper, silver plated GENERAL SPECIFICATIONS Torque : 1,50 Nm (1.10 Ft.lb) max. applied to nut Panel thickness : 5 mm (.196) max. Total travel : NO : 4,5 (.177) +/- 0,3 (.011) NC : 3,5 (.137) +/- 0,3 (.011) Operating temperature : -20 C to +55 C EN AGENCY APPROVALS 2A 250VAC or 4A 250VAC, T55/125 C All models 4A 250VAC - 8A 125VAC All models function 3 (NO) Models and L are standard marked NF. To order switches marked NF, UL or CSA, complete appropriate box of ordering format. ABOUT THIS SERIES Dimensions : first dimensions are in mm while inches are shown as bracketed numbers. Sealing boots are available to protect the switches against dust and water. They are presented in section H. Mounting accessories : standard hardware supplied : - silver contact models : 1 hex nut U166 and 1 knurled nut U411 - copper contact models : 1 hex nut U42 and 1 knurled nut U411 Standard and special hardware are presented in section I. Packaging unit : 40 pieces, except model 1200.L (50 pieces). APEM

2 1200 series Momentary pushbutton switches - round plunger Solder lug/quick-connect terminals - screw terminals Single pole configurations Approved models : see following pages Panel cut-out : Ø 12,2 (.480) Ø3.10 (.122DIA) Ø3.00x0.50 (.118DIAx0.50) Ø.50 (.059DIA) Ø3.00x0.50 (.118DIAx0.50) NO NC (function 3) (function 2) 4.50 (.177) 7.20 (.283) 6.35 (.25) 0.80 (.031) 4.50 (.177) 6.35 (.25) 0.80 (.031) MODEL STRUCTURE Plunger height : NO model : 7,50 mm, NC model : 5,80 mm Solder lug/quick-connect terminals 1212 Normally Closed 1213 Normally Open Screw terminals 1222 Normally Closed 1223 Normally Open 8.00 (.315) Normalized quick-connect terminals øx0.75 SI ø Normally Closed 1233 Normally Open ø1.50 (.059DIA) APEM

3 1200 series Momentary pushbutton switches - round plunger Plunger height : NO model : 7,50 mm, NC model : 5,80 mm Straight screw terminals + clamp 1202 Normally Closed 1203 Normally Open 7.20 (.283) Right angle screw terminals + clamp Normally Open (.275) 2 (.826) CONTACT MATERIALS A C Silver Copper, silver plated FINISH LUE Chrome plated cap nut U117 instead of knurled nut U411 PLUNGER COLOURS 2 : Black - 3 : Green - 6 : Red - 7/1 : White APEM

4 1200 series Momentary pushbutton switches - round plunger SPECIAL MODELS 209 NF standard marked - Silver contacts 1233A209 Normally open 209L NF standard marked - Silver contacts (.511) 1233A209L Normally open NOTE : Ground connector U187 compulsory on models 209 and 209L if the panel is not metallic or not connected to ground. Order separately : see section I. AGENCY APPROVALS NF UL-CSA All models All models function 3 (NO), including 209 and 209L Marking : to order switches marked NF, UL or CSA, complete above box with desired approvals APEM

5 1200M/MR series Robust momentary pushbutton switches - metal plunger Distinctive features and specifications Butt action contacts, double break UL and CSA approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts (A) : 4A 250VAC - 8A 125VAC - 4A 24VDC - 8A 12VDC - silver plated copper contacts (C) : 2A 250VAC - 3A 125VAC - 2A 14VDC - 3A 12VDC Initial contact resistance : 10 mω max. Insulation resistance : 0 MΩ min. at 500VDC Dielectric strength : Vrms 50 Hz min. between terminals Vrms 50 Hz min. between terminals and frame Electrical life : cycles at full load MATERIALS Case : polyamide Plunger : top chrome plated brass on polyamide base Bushing : brass, nickel plated Cap nut : brass, chrome plated Contacts : A : silver C : copper, silver plated GENERAL SPECIFICATIONS Torque : 1,50 Nm (1.10 Ft.lb) max. applied to nut Panel thickness : 4,5 mm (.177) max. Total travel : NO : 4,5 mm (.177) +/- 0,3 (.011) NC : 3,5 mm (.137) +/- 0,3 (.011) Operating temperature : -20 C to +55 C AGENCY APPROVALS 4A 250VAC - 8A 125VAC Availability : approved models are 1213A and 1203A (M or MR) (model 1223A is only UL approved). Marking : to order switches marked UL or CSA, complete appropriate box of ordering format. ABOUT THIS SERIES Dimensions : first dimensions are in mm while inches are shown as bracketed numbers. Mounting accessories : standard hardware supplied with all models : 1 hex nut U166 and 1 conic cap nut U Special cap nut U1874 is presented on the following pages. Packaging unit : 40 pieces APEM

6 1200M/MR series Robust momentary pushbutton switches - metal plunger Solder lug/quick-connect terminals - screw terminals Flat or curved plunger Panel cut-out Ø 12,2 (.480) Single pole Ø3.10 (.122DIA) Ø3.00x0.50 (.118DIAx0.50) Ø3.00x0.50 (.118DIAx0.50) NO NC (function 3) (function 2) 4.50 (.177) 7.20 (.283) 6.35 (.25) 0.80 (.031) 6.35 (.25) 0.80 (.031) MODEL STRUCTURE Solder lug/quick-connect terminals 6,35 x 0,8 (.250 x.031) 5.00 (.196) Curved plunger Flat plunger 1212MR 1212M NC 1213MR 1213M NO 5.00 (.196) Screw terminals Curved plunger Flat plunger 1222MR 1222M NC 1223MR 1223M NO 5.00 (.196) (.315) (.196) Screw terminals + clamp Curved plunger Flat plunger 1202MR 1202M NC 5.00 (.196) 5.00 (.196) 1203MR 1203M NO 7.00 (.275) APEM

7 1200M/MR series Robust momentary pushbutton switches - metal plunger CONTACT MATERIALS A C Silver Copper, silver plated AGENCY APPROVALS UL - CSA Availability : approved models are 1213A and 1203A (M or MR) - model 1223A is only UL approved. Marking : to order switches marked UL or CSA, complete above box with desired approvals. SPECIAL CAP NUT Chrome plated cap nut Ø 16 (.629), flat and plain. Can be supplied instead of standard cap nut U Order separately (.137) Ø16.00 (.629DIA) U1874 APEM

8 Selection guide - Section Pushbutton switches Series ZP SMT TP TP 9500 PHAP40 SP /9600 Page Poles 1 1 1, ,2 1,2 1 Maximum current 500mA 0,4VA 0,5A 100mA 100mA 1A (3A 250VAC)* 1A 48VDC 20V AC/DC 48V AC/DC 30VDC 30VDC 30VDC 4A 30VDC 30VDC Bushing dimension Ø4 (.157) Ø4,83 (10-48) Ø6,35 (1/4) Ø11,9 (15/32) Ø16 (.629) Mounting options Horizontal SMT Vertical right angle SMT Vertical Through hole Horizontal Through hole Vert. right angle Thr. hole Panel Terminal options PCB Solder lugs Quick-connect Sealing No Process Process Optional No Process Optional Optional ( )* See applicable approvals Series IT /4800 Page see website -107 B-114 B-117 Poles 1,2 1,2 2 1, ,2 Maximum current 3A 24VDC 4A 30VDC 4A 30VDC 7A 30VDC 1,5A 250VAC (4A 250VAC)* 6A 12VDC (3A 250VAC)* *2A 250VAC)* 4A 24VDC Bushing dimension Ø6,35 (1/4) Ø10 (.393) Ø11,9 (15/32) Ø 12 Mounting options Vertical Through hole Horizontal Through hole Vert. right angle Through hole Panel Snap-in Terminal options PCB Solder lugs Quick-connect Screw Sealing No Optional IP67 No No No No No 8

9 Selection guide - Section Pushbutton switches New! New! New! New! Series CG CP PBA FP MP LPI Page Poles 1 NPN 1 NPN 1 1,2 1,2 1 Maximum current 200mA 200mA 1A 200mA 20mA 5A 12VDC 24VDC 24VDC 24VDC 12VDC 5VDC 100mA 12VDC Illuminated Bushing dimension Ø15,20 (.598) Ø16 (.629) Ø19 (.748) Ø22 (.866) Ø24 (.944) Ø38 (1.496) Ø44 (1.732) Mounting options Panel Terminal options Solder lugs Screw Flying leads Cable Connector Sealing N/A IP68, IP69K IP68,IP69K No IP68 IP53 «I» range selection guide : page 7 AV series selection guide : page 10 9

1200 series. Momentary pushbutton switches - round plunger. Distinctive features and specifications. Butt action contacts, double break

1200 series. Momentary pushbutton switches - round plunger. Distinctive features and specifications. Butt action contacts, double break Distinctive features and specifications Butt action contacts, double break NF (EN 61058-1), UL and CSA approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts

More information

Momentary or alternate action pushbutton switches. UL approved 3A 250VAC, 6A 125VAC. Availability : consult factory for details of approved models.

Momentary or alternate action pushbutton switches. UL approved 3A 250VAC, 6A 125VAC. Availability : consult factory for details of approved models. Distinctive features and specifications Bushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 4A 30VDC - gold

More information

9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview

9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview A 9000 SERIES Overview 9 SERIES Number of poles 3 Single pole Electrical functions 2 Normally closed (NC) 3 Normally open (NO) Terminals, case and bushing Case height 8 (.314) 2 Straight terminals - threaded

More information

8000 series Momentary or alternate action pushbutton switches

8000 series Momentary or alternate action pushbutton switches Distinctive features and specifications ushing Ø 6,35 (1/4) and Ø 11,9 (15/32) UL approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : - silver contacts : 3A 250VAC - 6A

More information

Two case lengths. Three electrical functions. Sealing options. Model X1146 with Ø 16 (.630) bushing ELECTRICAL SPECIFICATIONS.

Two case lengths. Three electrical functions. Sealing options. Model X1146 with Ø 16 (.630) bushing ELECTRICAL SPECIFICATIONS. Distinctive features and specifications Two case lengths Three electrical functions Sealing options Model X1146 with Ø 16 (.630) bushing Max. current/voltage rating with resistive load : - silver contact

More information

ELECTRICAL SPECIFICATIONS

ELECTRICAL SPECIFICATIONS Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for

More information

18000 series Snap-action momentary pushbutton switches

18000 series Snap-action momentary pushbutton switches Distinctive features and specifications Panel and PC mount models Snap-in panel mounting version Tactile feedback ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : Models for

More information

8000 series. Momentary or alternate action pushbutton switches DISTINCTIVE FEATURES ELECTRICAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS

8000 series. Momentary or alternate action pushbutton switches DISTINCTIVE FEATURES ELECTRICAL SPECIFICATIONS GENERAL SPECIFICATIONS MATERIALS SW-8000-808 DISTINCTIVE FEATURES Momentary or alternate Bushing Ø 6.35 (/4) and Ø.9 (5/3) UL approved ELECTRICAL SPECIFICATIS Max. current/voltage rating with resistive load : - silver contacts : 4 A 30

More information

AV series Anti-vandal and security pushbutton switches

AV series Anti-vandal and security pushbutton switches Anti-vandal and security pushbutton switches Distinctive features Attractive, robust and durable Irremovable Anti-jamming construction : reduced travel to prevent insertion of foreign parts and mechanism

More information

13000 series Professional quick-break momentary pushbutton switches

13000 series Professional quick-break momentary pushbutton switches Distinctive features and specifications PC and panel mount models ushing Ø 6,35 (1/4) and 11,9 (15/32) UL and CECC approved ELECTRICAL SPECIFICATIONS Max. current/voltage rating with resistive load : -

More information

2600 SERIES ILLUMINATED AND NON-ILLUMINATED ROCKER SWITCHES Overview

2600 SERIES ILLUMINATED AND NON-ILLUMINATED ROCKER SWITCHES Overview Overview 6 SERIES Electrical functions Frame type 1 ON - OFF 4 ON ON ON MOM - ON 6 ON - ON 7 MOM OFF MOM 8 ON OFF MOM 9 ON OFF ON double pole only LH LP Plain With protection guard Number of poles Special

More information

Selection guide - Section B1 «I» range

Selection guide - Section B1 «I» range Selection guide - Section «I» range New! New! New! New! New! New! Series IC IL IM IP IB-IS IHS IHL IQ mom. & latching hall effect hall effect momentary Page -2-6 -11-15 -25-29 -32-35 Poles 1 1 1 1 1 1

More information

600H AND 600NH SERIES TOGGLE SWITCHES - HIGH AMPERAGE Overview

600H AND 600NH SERIES TOGGLE SWITCHES - HIGH AMPERAGE Overview 600H AND 600NH SERES TOGGLE SWTCHES - HGH AMPERAGE Overview 6 SERES Number of poles Electrical functions Actuator and terminals Single pole Double pole 5 For pole, see 600 series. ON - OFF 5 MOM - ON 6

More information

IL series Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary

IL series Sealed pushbutton switches for thick panels - long bushing Ø 12 mm - momentary Distinctive features and specifications Momentary pushbuttons for thick panels Illuminated or non-illuminated Tactile feedback Flat round actuator for optional marking Sealed to IP67 ENVIRONMENTAL SPECIFICATIONS

More information

AV SERIES PUSHBUTTON SWITCHES Distinctive features

AV SERIES PUSHBUTTON SWITCHES Distinctive features PUSHBUTTON SWITCHES Distinctive features Attractive, robust and durable Irremovable Anti-jamming construction : reduced travel to prevent insertion of foreign parts and mechanism protected against crushing

More information

Pushbutton and key switches

Pushbutton and key switches Pushbutton and key switches Section ZP Tiny, metal bushing, momentary 3 SMT TP Tiny, SMT, washable, momentary 5 TP Tiny, washable, momentary 7 9100-9200-9500 Subminiature, momentary 13 IF Miniature, sealed,

More information

Various rocker colours. Illuminated or non-illuminated ELECTRICAL SPECIFICATIONS

Various rocker colours. Illuminated or non-illuminated ELECTRICAL SPECIFICATIONS 00 series istinctive features and specifications Three rocker shapes : plain, Vshaped or concave Various rocker colours Frame with protection guard on 00LP models Illuminated or nonilluminated UL, CSA,

More information

600H and 600NH series Toggle switches - high amperage

600H and 600NH series Toggle switches - high amperage 600H and 600NH series Toggle switches - high amperage Distinctive features and specifications UG1410 Construction Terminal and contact support are manufactured from a single piece of metal. The contacts

More information

IQ series Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting

IQ series Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting Sealed pushbutton switches - bushing Ø 16 mm - snap-in mounting Distinctive features Like the IR series, the IQ series is a range of sealed pushbutton switches with dia. 16 mm bushing. But IQ pushbuttons

More information

Sealed pushbutton switches - bushing Ø 16 mm - momentary

Sealed pushbutton switches - bushing Ø 16 mm - momentary Sealed pushbutton switches - bushing Ø 16 mm - momentary Distinctive features The IR series is a range of sealed momentary pushbutton switches with dia. 16 mm bushing. This series is divided into 2 families

More information

IR series Sealed pushbutton switches - bushing Ø 16 mm - momentary

IR series Sealed pushbutton switches - bushing Ø 16 mm - momentary Sealed pushbutton switches - bushing Ø 16 mm - momentary Distinctive features The IR series is a range of sealed momentary pushbutton switches with dia. 16 mm bushing. This series is divided into 2 families

More information

Common features. Installation options. Aesthetic options

Common features. Installation options. Aesthetic options New! LPI series Distinctive features and applications UG1006-A Common features Large ergonomic actuator (Ø 35 mm) Tactile feedback Low behind-panel depth (21 mm max.) Stylish design Long life This series

More information

5000 SERIES TOGGLE SWITCHES Distinctive features B

5000 SERIES TOGGLE SWITCHES Distinctive features B 5000 SERES TOGGLE SWTCHES Distinctive features THE WDEST RANGE N MNATURE SWTCHES 7 7 actuators including toggles, paddle levers and locking levers in different lengths. 5 5 contact materials from dry circuit

More information

IP series. Pushbutton switches for harsh environments bushing Ø 12 mm momentary DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS

IP series. Pushbutton switches for harsh environments bushing Ø 12 mm momentary DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS SW-IPMOM-1709 DISTINCTIVE FEATURES Illuminated or non-illuminated Tactile feedback Wide variety of configurations Flat round actuator for optional marking Sealed to IP67 and IP69K ENVIRONMENTAL SPECIFICATIONS

More information

Sealed toggle switches

Sealed toggle switches Distinctive features and specifications Completely sealed switching chamber Three types of terminals UL approved ELECTRICL SPECIFICTIONS Max. current/voltage rating with load and electrical life at full

More information

S and SF series Washable miniature toggle switches

S and SF series Washable miniature toggle switches S and SF series Washable miniature toggle switches Distinctive features and specifications Sealed Secure assembly of the two case parts Internally sealed bushing Epoxy sealed terminals Process compatible

More information

IP series Latching action pushbutton switches for harsh environments

IP series Latching action pushbutton switches for harsh environments Latching action pushbutton switches for harsh environments Distinctive features and specifications Latching action Actuator remains in the low position when ON. Illuminated and non-illuminated Compact

More information

IP series. Pushbutton switches for harsh environments bushing Ø 12 mm latching DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS

IP series. Pushbutton switches for harsh environments bushing Ø 12 mm latching DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS SW-IPLATCH-802 DISTINCTIVE FEATURES Latching action Illuminated or non-illuminated Compact Flat round actuator for optional marking Sealed to IP67 ENVIRONMENTAL SPECIFICATIONS Front panel sealing : IP67

More information

CIT SWITCHTM ANT SPECIFICATIONS

CIT SWITCHTM ANT SPECIFICATIONS Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability

More information

Security Switches. Anti Vandal, Pushbutton. Specifications. Specifications S76 S77. Features.748 (19mm) bushing diameter

Security Switches. Anti Vandal, Pushbutton. Specifications. Specifications S76 S77. Features.748 (19mm) bushing diameter Anti Vandal, Pushbutton S76.287 (7.3) c: Screw (Assembled).098 (2.5) Typ.142 (3.6) Type Circuitry Action Actuator g 54 377 SPST NO OFF (ON) Stainless Steel, Flat S76b 54 378 SPST NO OFF (ON) Stainless

More information

Series AV. Pushbutton Switches NUT O-RING HOW TO ORDER

Series AV. Pushbutton Switches NUT O-RING HOW TO ORDER Pushbutton Switches SPECIFICATIS: BUSHING: 22mm. CTACT RATING: 2A @ 48VDC or 125VAC. ELECTRICAL LIFE: 10,000cycles at full load. CTACT RESISTANCE: 10m-ohms max. initial @2-4VDC. INSULATI RESISTANCE: 1,000M-ohms

More information

FP series Fully illuminated pushbutton switches - bushing Ø 30 mm - momentary or latching

FP series Fully illuminated pushbutton switches - bushing Ø 30 mm - momentary or latching Fully illuminated pushbutton switches bushing Ø 30 mm momentary or latching Distinctive features and specifications Full actuator or symbol illumination UG1410AR3 Snapin and threaded bushing models Large

More information

IR series. Sealed pushbutton switches bushing Ø 16 mm momentary standard version DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS

IR series. Sealed pushbutton switches bushing Ø 16 mm momentary standard version DISTINCTIVE FEATURES ENVIRONMENTAL SPECIFICATIONS SW-IRMOM-1801 DISTINCTIVE FEATURES Screw version up to A Tactile feedback Sealed to IP6 Illuminated or non-illuminated Flat round actuator for optional marking ENVIRONMENTAL SPECIFICATIONS Front panel

More information

Sealed to IP67 Dia. 12 mm or 16 mm bushing Momentary or latching Illuminated or non-illuminated Custom options Comprehensive range

Sealed to IP67 Dia. 12 mm or 16 mm bushing Momentary or latching Illuminated or non-illuminated Custom options Comprehensive range I range Sealed pushbutton switches Sealed to IP67 Dia. 12 mm or 16 mm bushing Momentary or latching Illuminated or non-illuminated Custom options Comprehensive range I range Sealed pushbutton switches

More information

IHS series Hall effect pushbutton switches - bushing Ø 12 mm - momentary

IHS series Hall effect pushbutton switches - bushing Ø 12 mm - momentary IHS series Hall effect pushbutton switches - bushing Ø 12 mm - momentary Distinctive features and specifications UG1410A Momentary pushbutton (NO) 5 million cycles Low behind-panel depth Standard and high

More information

ANT. Materials. Features. Miniature Toggle

ANT. Materials. Features. Miniature Toggle Specificationscations RoHS Compliant ANT Electrical Ratings Electrical Life Contact Resistance 5A @ 0VAC, 8VDC A @ 50VAC See Contact Options 50,000 cycles typical

More information

600H - 600NH UL CSA NF-VDE UL 1054 CSA 22-2 EN

600H - 600NH UL CSA NF-VDE UL 1054 CSA 22-2 EN SW-600H-600NH-80 PNEL SWTCHES DSTNCTVE FETURES Robust mechanism High current/voltage rating nsulated or metal lever UL, CS and NF-VDE (EN 6058-) approved ELECTRCL SPECFCTS Max. current/voltage ratings

More information

APEM LPI series Front or rear mounting Illuminated or non-illuminated Flexibility of marking Meeting the requirements of EN81-70 Ø 35 mm actuator

APEM LPI series Front or rear mounting Illuminated or non-illuminated Flexibility of marking Meeting the requirements of EN81-70 Ø 35 mm actuator APEM LPI series Front or rear mounting Illuminated or non-illuminated Flexibility of marking Meeting the requirements of EN81-70 Ø 35 mm actuator Distinctive features and applications Common features Large

More information

Pushbutton switches & indicators. Panel Sealed to IP65. Push on tab terminals 6A 250VAC AGENCY APPROVALS

Pushbutton switches & indicators. Panel Sealed to IP65. Push on tab terminals 6A 250VAC AGENCY APPROVALS Distinctive features and specifications Panel Sealed to IP65 Single pole to four pole changeover Custom engraving or film legends options Push on tab terminals 6A 250VAC A01_AX1607USR1 ELECTRICAL SPECIFICATIONS

More information

Available in a wide range of colours.

Available in a wide range of colours. Prevent dust, sand and water from getting into switches. On toggle versions, also prevent ice from blocking lever action Compatible with frontal sealing options (K and X408). Available in a wide range

More information

FP series Fully illuminated pushbutton switches - bushing Ø 24 mm - momentary or latching

FP series Fully illuminated pushbutton switches - bushing Ø 24 mm - momentary or latching Fully illuminated pushbutton switches bushing Ø 24 mm momentary or latching Distinctive features and specifications Threaded bushing UG1410AR2 Full actuator or symbol illumination Large but lightweight

More information

APEM. LPI series. Tactile pushbutton switches with large actuator. Ø 35 mm actuator

APEM. LPI series. Tactile pushbutton switches with large actuator. Ø 35 mm actuator APEM LPI series Front or rear mounting Illuminated or non-illuminated Flexibility of marking Meeting the requirements of EN81-70 Ø 35 mm actuator Distinctive features and applications Common features

More information

Attractive rugged rocker switch

Attractive rugged rocker switch istinctive features Attractive rugged rocker switch UG0AR Removable actuator Easy to stock Easy to customize Uptodate rocker design Smooth curves Wide choice of colours and symbols Laser etched symbols

More information

8500 Series Subminiature Pushbutton Switches

8500 Series Subminiature Pushbutton Switches Subminiature Switches Features/Benefits Pre-travel or over-travel models available Ratings up to 3 AMPS Reliable contact design RoHS compliant Typical Applications Detection Telecommunications and networking

More information

SERIES 100 SWITCHES TOGGLE SWITCHES - MINIATURE. Phone: Fax: SPECIFICATIONS MATERIALS

SERIES 100 SWITCHES TOGGLE SWITCHES - MINIATURE. Phone: Fax: SPECIFICATIONS MATERIALS TACT SERIES 100 - MINIATURE SPECIFICATIONS Contact Rating: Life Expectancy: Contact Resistance: Insulation Resistance: Dielectric Strength: See contact material options 40,000 make-and-break cycles at

More information

PLK & PLR SERIES Professional keylock or rotary switches

PLK & PLR SERIES Professional keylock or rotary switches ISO OO AFAQ N /77c PLK & PLR SERIES Professional keylock or rotary switches NEW RANGE Miniature & subminiature to positions to poles PLK - PLR SERIES PROFESSIONAL KEYLOCK OR ROTARY SWITCHES Distinctive

More information

A1-A01-A02-A03 series

A1-A01-A02-A03 series A1-A01-A02-A03 series Industrial controls Distinctive features The A01 and A02 series offer ranges of : - pushbutton switches, illuminated or not - indicators - 2 or 3 position keylock switches - 2 or

More information

Distinctive Characteristics

Distinctive Characteristics Distinctive Characteristics Various cap styles and colors to meet differing application needs. Bright, full face illumination to distinctively indicate status. Rear panel threaded mounting or snap-in mounter

More information

C&K E Series Sealed Miniature Toggle Switches

C&K E Series Sealed Miniature Toggle Switches Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available Typical Applications Telecommunications

More information

IHS series Hall effect pushbutton switches - bushing Ø 12 mm - momentary Overview IHS SERIES Actuator shapes Electrical function Operating force Termi

IHS series Hall effect pushbutton switches - bushing Ø 12 mm - momentary Overview IHS SERIES Actuator shapes Electrical function Operating force Termi IHS series Hall effect pushbutton switches - bushing Ø 12 mm - momentary Distinctive features and specifications Momentary pushbutton (NO) 5 million cycles Low behind-panel depth Standard and high actuator

More information

7000 SERIES ROCKER AND PADDLE SWITCHES Overview

7000 SERIES ROCKER AND PADDLE SWITCHES Overview Overview 7 SERIES Number of poles Terminals 3 Single pole 4 Double pole onsult factory for three and four pole models. Blank W WW Y } Y4 } Y6 } Y7 } Z Solder lugs or straight P depending on model Right

More information

Product Range. Rocker & Paddle Switches. Rocker & Paddle Switches. Rocker & Paddle Switches

Product Range. Rocker & Paddle Switches. Rocker & Paddle Switches. Rocker & Paddle Switches Product Range for Panel Mounting: F, TRD and Gemini Series for PCB Mounting: Gemini Series Main features: Sealed or unsealed versions Various switch functions Gold or silver contacts LED illumination available

More information

3500 SERIES HIGH PERFORMANCE TOGGLE SWITCHES - ENVIRONMENTALLY SEALED Distinctive features

3500 SERIES HIGH PERFORMANCE TOGGLE SWITCHES - ENVIRONMENTALLY SEALED Distinctive features HGH PERFORMNCE TOGGLE SWTCHES - ENVRONMENTLLY SELED Distinctive features Completely sealed switches withstanding 0,1 bar pressure Front face and cover-to-case silicone seal Moulded-in terminal inserts

More information

E Series Sealed Miniature Toggle Switches

E Series Sealed Miniature Toggle Switches Sealed Miniature Switches eatures/benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available

More information

ANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871

ANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871 Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability

More information

Fully illuminated pushbutton switches - bushing Ø 24 mm - momentary or latching

Fully illuminated pushbutton switches - bushing Ø 24 mm - momentary or latching istinctive features and specifications Full actuator or symbol illumination UG1410R1 Suited for integrated designs Large but lightweight Sealed to IP69K Pad printed or laser etched symbols Pad printing

More information

Series 300. Miniature Rocker & Paddle Switches

Series 300. Miniature Rocker & Paddle Switches Series 00 SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 0,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. inital @ -VDC. 00mA for both

More information

Capacitive Switches

Capacitive Switches Capacitive Switches www.capacitive-switch.com About Capacitive Switches The new CP series technology senses the touch of a finger and creates an electrical charge to activate the switches An auto-calibration

More information

Capacitive Switches

Capacitive Switches Capacitive Switches www.capacitive-switch.com langir About Capacitive Switches The new CP series technology senses the touch of a finger and creates an electrical charge to activate the switches An auto-calibration

More information

A1-A01-A02-A03 series Industrial controls

A1-A01-A02-A03 series Industrial controls A-A0-A0-A0 series Industrial controls Distinctive features The A0 and A0 series offer ranges of : - pushbutton switches, illuminated or not - indicators - or position keylock switches - or position rotary

More information

7000 Series Miniature Toggle Switches

7000 Series Miniature Toggle Switches Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available

More information

7000 Series Miniature Toggle Switches

7000 Series Miniature Toggle Switches Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available

More information

onlinecomponents.com

onlinecomponents.com eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available Typical Applications

More information

Pushbutton switches & indicators. Panel Sealed to IP65. Push on tab terminals 6A 250VAC AGENCY APPROVALS

Pushbutton switches & indicators. Panel Sealed to IP65. Push on tab terminals 6A 250VAC AGENCY APPROVALS Distinctive features and specifications A01_AX1607US Panel Sealed to IP65 Single pole to four pole changeover Custom engraving or film legends options Push on tab terminals 6A 250VAC PANEL CUT OUT ELECTRICAL

More information

Industrial controls. Section G

Industrial controls. Section G Industrial controls Section A1 A01 A02 A03 Distinctive features and specifications 3 Engraved aluminium flush mounting pushbuttons & indicators - Panel cut-out Ø 22 (.866) 5 Pushbutton, rotary lever, keylock

More information

APEM. K range. Power rocker switches and indicators. Unique rocker design

APEM. K range. Power rocker switches and indicators. Unique rocker design APEM K range Power rocker switches and indicators Wide range Laser etched symbols Illuminated or nonilluminated Optionally sealed to IP8 Unique rocker design K range Power rocker switches and indicators

More information

C&K E Series Sealed Miniature Toggle Switches

C&K E Series Sealed Miniature Toggle Switches Features/Benefits Sealed against solder and cleaning process contaminants UL 94V-0 Nylon case and bushing Multi-positions ESD protection available RoHS compliant models available Typical Applications Telecommunications

More information

Distinctive Characteristics

Distinctive Characteristics Distinctive Characteristics Full face or spot illumination with incandescent lamps or multi-element LEDs, with or without resistors. Short Body Pushbuttons Series YB Choice of super bright LEDs in white,

More information

Toggles Product Selection Guide

Toggles Product Selection Guide s Product Selection Guide s Series 7000 Military E ET T GT 9000 Switch Type Miniature Miniature Miniature Subminiature Subminiature Ultraminiature Power Poles/Throws,, 3PDT, 4PDT,,,, 3PDT SPST,, SPST,,

More information

Distinctive Characteristics

Distinctive Characteristics Distinctive Characteristics Carefully designed light diffusion and filtering system produce bright, full surface illumination with front panel relamping. Spot illumination available in single and bicolor

More information

Snap Action Miniature Pushbutton Switches

Snap Action Miniature Pushbutton Switches Snap Action Miniature Switches SERIES 38C Miniature Switches FEATURES and Circuitry Choice of Bushings, and Terminations Caps and Frames Available UL Recoginized DIMENSIONS IN INCHES (AND MILLIMETERS)

More information

Pushbutton Switches Sub-Miniature

Pushbutton Switches Sub-Miniature Pushbutton Switches Specifications: Contact rating Mechanical life Maximum contact resistance Minimum insulation resistance Dielectric strength Operating temperature Materials: Case Plunger Bushing Housing

More information

General Specifications

General Specifications Series D Light Touch Miniature Pushbuttons General Specifications Electrical apacity (Resistive Load) Logic Level: 0.VA maximum @ 8V A/D maximum (Applicable Range 0.mA ~ 0.A @ 0mV ~ 8V) Note: Find additional

More information

T Series Subminiature Toggle Switches

T Series Subminiature Toggle Switches eatures/benefits Compact size small footprint Single and double pole models PC and panel mount options available RoHS compliant models available Typical Applications Hand-held telecommunications Instrumentation

More information

Distinctive Characteristics

Distinctive Characteristics Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. Antistatic superstructure, consisting of the carbon impregnated bushing and

More information

General Specifications

General Specifications Series FB & SB Momentary Pushbuttons General Specifications FB Series Electrical apacity (Resistive Load) Power Level: 500mA @ 125V A for silver Logic Level: 0.4VA max. @ 28V A/D max. for gold (Applicable

More information

General Specifications

General Specifications Series WT Environmentally Sealed General Specifications Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical Capacity

More information

C&K 7000 Series Miniature Toggle Switches

C&K 7000 Series Miniature Toggle Switches Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy sealed terminals prevent contamination during soldering Typical Applications Telecommunications

More information

ELECTRO-MECHANICAL MINIATURE SEALED. Long life Solder or PC terminals PanelsealedtoIP67

ELECTRO-MECHANICAL MINIATURE SEALED. Long life Solder or PC terminals PanelsealedtoIP67 PUSHBUTTON SWITCHES ELECTRO-MECHANICAL MINIATURE SEALED SERIES 48EM: ACTUAL SIZE FLEX-TECH MINIATURE SEALED PUSHBUTTON SWITCHES This rugged multi-option sealed pushbutton series offers the utmost in choices

More information

SPDT DPDT 3PDT 4PDT SWITCHES TACT POS 1 POS 2 POS 3. Model No.

SPDT DPDT 3PDT 4PDT SWITCHES TACT POS 1 POS 2 POS 3. Model No. SCHEMATIC 3 2 1 Model No. SP-1 ON NONE ON SP-2 ON NONE (ON) SP-3 ON OFF ON SP-4 (ON) OFF (ON) SP-5 ON OFF (ON) Term. Comm. 2-3 OPEN 2-1 ( ) = Momentary 6 5 4 3 2 1 Model No. DP-1 ON NONE ON DP-2 ON NONE

More information

1000 Series Miniature Slide Switches

1000 Series Miniature Slide Switches Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &

More information

Custom products Section JA

Custom products Section JA Tetes_Sections 202-DEF_ p INTROS Chap+guide/def 22//2 0:47 Page Custom products Section A ERMEC, S.L. BARCELONA C/ Francesc Teixidó, 22 E-0898 Badalona (Spain) Tel.: (+34) 902 450 60 Fax: (+34) 902 433

More information

SWITCHES. Other switch types include conventional, push-button and toggle switches.

SWITCHES. Other switch types include conventional, push-button and toggle switches. Switches Manufactured from Stainless Steel, Bulgin s extensive range of vandal resistant security switches are designed with a high resistance to wear and tear, corrosion and harsh use in potentially hostile

More information

SPECIFICATIONS: MATERIALS: If your preferred product configuration is not shown, please contact our sales representative for custom design.

SPECIFICATIONS: MATERIALS: If your preferred product configuration is not shown, please contact our sales representative for custom design. SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 50,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. initial @2-4VDC 00mA for both silver

More information

General Specifications

General Specifications Series FB & SB Momentary Pushbuttons General Specifications FB Series Electrical apacity (Resistive Load) Power Level: 500mA @ 125V A for silver Logic Level: 0.4VA max. @ 28V A/D max. for gold (Applicable

More information

C&K 1000 Series Miniature Slide Switches

C&K 1000 Series Miniature Slide Switches Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &

More information

L1 = Solder terminal 2.8 x 0.5 mm Ø Behind panel

L1 = Solder terminal 2.8 x 0.5 mm Ø Behind panel Raised design Emergency-stop switch, foolproof EN IEC 60947-5-5, IP 65 Equipment consisting of (schematic overview) L1 35.6 6 max. 59.5 41 18x24 Actuator Product can differ from the current configuration.

More information

Power rocker switches

Power rocker switches Distinctive features and specifications Protected rocker Illuminated or nonilluminated VDE (EN 08) approved Sealed to IP ELETRIL SPEIFITIONS urrrent/voltage rating : functions (ONOFF) and (ONON) : VD,

More information

C&K DA Series Miniature Single Pole Rocker Switches

C&K DA Series Miniature Single Pole Rocker Switches Features/Benefits Typical Applications Nice actuator styling with Small appliances multiple options Computers and peripherals Guards to prevent accidental Medical instrumentation actuation Momentary and

More information

General Specifications

General Specifications Series E Light Touch Miniature Pushbuttons eneral Specifications Electrical apacity (Resistive Load) Power Level (silver): A @ 25V A for silver contacts Logic Level (gold): 0.4VA maximum @ 28V A/D maximum

More information

ET Series Sealed Subminiature Toggle Switches

ET Series Sealed Subminiature Toggle Switches Sealed Subminiature Switches eatures/benefits Sealed against solder and cleaning process contaminants ESD protection available Thru-hole and surface mount models Compact size and small footprint save PCB

More information

Distinctive Characteristics

Distinctive Characteristics Distinctive Characteristics Full face and spot illumination available. Front panel relamping. Choice of super bright LEDs in white, green, and blue in addition to bright red, amber, and green LEDs. Compact

More information

Series WP. Pushbutton Switches HOW TO ORDER. Toggle Rocker Slide Pushbutton AV Rotary Tact Touch Key Miscellaneous

Series WP. Pushbutton Switches HOW TO ORDER. Toggle Rocker Slide Pushbutton AV Rotary Tact Touch Key Miscellaneous RATING: AC125V 7A, AC250V 4A. CIRCUIT: DPDT. CONTACT RESISTANCE: 20m-ohms max. @ 5VDC 1A. DIELECTRIC STRENGTH: AC 1,500V for 1 min. LIFE EXPECTANCY: 6-10 cycle / min. ELECTRICAL LIFE: 6,000 cycle. OPERATING

More information

Switches. Introduction

Switches. Introduction Introduction Switches Manufactured from, Bulgin s extensive range of vandal resistant security switches are designed with a high resistance to wear and tear, corrosion and harsh use in potentially hostile

More information

APEM COMPONENTS LIMITED

APEM COMPONENTS LIMITED APEM COMPONENTS LIMITED Designed and manufactured in the UK Illuminated pushbuttons and indicators, Keylock, Lever and Emergency Stop Switches APEM designs and manufactures three product lines: miniature

More information

Distinctive Characteristics

Distinctive Characteristics Distinctive Characteristics ntirotation design, standard on noncylindrical levers, mates toggle and bushing; bottom of toggles has two flatted sides which fit into a complementary opening inside bushing.

More information

Miniature microswitches - Positive break

Miniature microswitches - Positive break 1 Miniature microswitches - Positive break 81607 Coil spring snap-action mechanism with wiping contacts Positive opening action according to IEC 6097-5-1 Annex K atings from 10 ma Vc to 6 A 250 Va Very

More information

Miniature Switches & Pilot Devices

Miniature Switches & Pilot Devices A8 Series Miniature Switches and Pilot Devices: 8mm Key features of the 21/64" (8mm) A8 series Switches and Pilot Devices include: 21/64" (8mm) round mounting hole Compact Design Saves Space Bright and

More information

Mechanical Key Switch

Mechanical Key Switch Mechanical Key Switch B3F A Wide Range of Models: 6 x 6 mm, 12 x 12 mm, Vertical and High-force. Excellent tactile feel combined with high life expectancy. Available in stick packaging for automatic mounting

More information

Distinctive Characteristics

Distinctive Characteristics Distinctive Characteristics Wide selection of illumination effects is achieved with single and bicolor, - or -element LEDs, in flat, beveled, or sculptured caps. LED colors include red, amber, green, white,

More information