Series LP. Illuminated Pushbutton Switches HOW TO ORDER SPECIFICATIONS: WPL-25
|
|
- Jared Campbell
- 5 years ago
- Views:
Transcription
1 SPECIFICATIONS: CONTACT: Silver contact (Gold plated). ELECTRICAL RATING: AC125, 2V resistive load). INSULATION RESISTANCE: More than Mohms at DC 0V. DIELECTRIC STRENGTH: a. 0V RMS(/60Hz) between terminals. b. 1,000V RMS(/60Hz) between terminals and ground for one minute. CONTACT RESISTANCE: Less than 30mohms 1A and 6VDC. MECHANICAL LIFE: a. MOMENTARY ACTION: More than 300,000 operations. b. ALTERNATE ACTION: More than,000 operations. ELECTRICAL LIFE: Over 30,000 operations max. OPERATING TEMPERATURE: 15 C ~ + C. AMBIENT HUMIDITY: % RH max. Specifications and Dimensions subject to change WPL25 P.C.B. LAYOUT LED COLOR SWITCH SCHEMATIC LED SCHEMATIC WPL25R (N.O.) COM. (N.C.) L1 WPL25G L2 WPL25RG / WPL26 P.C.B. LAYOUT WPL26R WPL26G WPL26RG LED COLOR / SWITCH SCHEMATIC LED SCHEMATIC (N.O.) COM. (N.C.) L1 L2 HOW TO ORDER LP WPL25 Series LED Color 152
2 SPECIFICATIONS: CONTACT RATING: 5A 125/2VAC. ELECTRICAL LIFE:,000 cycles with resistive load 3A 125VAC. CONTACT RESISTANCE: mohms max (initial). INSULATION RESISTANCE: 0VDC 200Mohms min. DIELECTRIC STRENGTH: 1,000V RMS ~60Hz. OPERATING TEMPERATURE: 25 C ~ + C. OPERATING FORCE: 190±gf max. (SPDT). 2±gf max. (DPDT Square) & 300±gf max. (DPDT Rectangular). TOTAL TRAVEL: 2.30±0.mm. SOLDERING: 360 C for 4sec. (Manual) 260 C for 3sec. (Wave). Rectangular Snapin Style, SPDT, Solder lug WPL251M WPL251A Rectangular Snapin Style, DPDT, Solder lug WPL252M WPL252A MATERIALS: SNAPIN FRAME: Stainless steel. HOUSING: PA. BASE: PA. CONTACT: Silver alloy. SPRING: Piano wire. LED TERMINAL: PBS with Au plated. TERMINAL: PBS with Au plated. LED: Surface type LED. Specifications and Dimensions subject to change Latchdown position For type only Latchdown position For type only 2 L 1 2 L 1 Toggle Rocker Slide Pushbutton AV Rotary Tact Touch Key Miscellaneous 153
3 Square Snapin Style, SPDT, Solder lug Latchdown position For type only 2 L 1 WPL261M WPL261A Square Snapin Style, DPDT, Solder lug Latchdown position For type only 2 L 1 WPL262M WPL262A Rectangular Style, SPDT, PC ThroughHole Latchdown position For type only 2 L 1 WPL251M WPL251A 154
4 Rectangular Style, DPDT, PC ThroughHole Latchdown position For type only WPL252M WPL252A Square Style, SPDT, PC ThroughHole WPL261M WPL261A Square Style, DPDT, PC ThroughHole Latchdown position For type only Latchdown position For type only 2 L 1 2 L 1 2 L 1 Toggle Rocker Slide Pushbutton AV Rotary Tact Touch Key Miscellaneous WPL262M WPL262A 155
5 SWITCH & LED SCHEMATICS SPDT SCHEMATICS Single color LED Dual colors LED 1 Yellow Yellow 2 1 Yellow 2 1 Full (RGB) colors LED DPDT SCHEMATICS PANEL MOUNTING (M1 TYPE) Panel Thickness: 1.0~3.2mm Panel Thickness: 1.0~3.2mm PCB MOUNTING (M2 TYPE) Rectangular SPDT s s Rectangular DPDT s s 156
6 Square SPDT Square DPDT Single Color White Dual Colors RGB Forward Voltage Vf(V) at If=20mA s s s s LED SPECIFICATIONS Dominant Wavelength dom(nm) Luminous Intensity Iv(mcd) at If=20mA Min Typ Max Min Typ Max Min Typ Max See note Power Dissipation Pd(mW) Toggle Rocker Slide Pushbutton AV Rotary Tact Touch Key Miscellaneous 157
7 LED SPECIFICATIONS Reverse Voltage Vr(V) max. Reverse Current Ir(uA) at Vr=5V Forward Current If(mA) max. 5V ua 30mA Notes: 1.Chromaticity Coordinates X=0.265 / Y=0.2 2.LED is static sensitive devices 3.LED circuit is isolated and requires external power source 4.LED is an integral part of the switch 5.Emitting color is ±20% 6.Forward voltage is ±0.1V 7.Liminous intensity is ±20% CAP & LED OPTIONS Code Cap Color Code Led Color 1 R 2 G 3 Yellow Y Yellow 6 Black B 8 9 Transparency 0 Without LED HOW TO ORDER Series Function Cap Color Terminal LED 1 LED 3 LP M A M1 Solder Lug M2 PC throughhole 158
Series R19. Power Rocker Switches MARK OPTIONS COLOR OPTIONS TERMINATION OPTIONS HOW TO ORDER
CONTACT RATING: 6A 250VAC 10A 125VAC. ELECTRICAL LIFE: 10,000 Operations. MECHANICAL LIFE: 50,000 Operations. CONTACT RESISTANCE: 1,000M-ohms. DIELECTRIC STRENGTHS: >1,500
More informationSERIES SINGLE AND DOUBLE-POLE ROCKER SWITCHES
TO 1 (4) A 50 V AC PRODUCT FEATURES 100 million times proven switching principle High, fl exible design variety Excellent actuating characteristic Illuminated and non-illuminated variants ON REQUEST Other
More informationSeries 300. Miniature Rocker & Paddle Switches
Series 00 SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 0,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. inital @ -VDC. 00mA for both
More informationSERIES SINGLE AND DOUBLE-POLE ROCKER SWITCHES
TO 1 (4) A 50 V AC ROCKER SWITCHES PRODUCT FEATURES 100 million times proven switching principle High, fl exible design variety Excellent actuating characteristic Illuminated and non-illuminated variants
More informationCIT SWITCHTM ANT SPECIFICATIONS
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
More informationSERIES SINGLE AND DOUBLE-POLE PUSHBUTTON SWITCHES
PRODUCT FEATURES Illuminated and non-illuminated pushbutton switch Proven jump contact switching system (double interrupting) Opening and closing speed independent of the actuating speed Product-dependent
More informationANR SPECIFICATIONS. MATERIALS RoHS COMPLIANT - E222871
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
More informationHK-TH10R-W. Features. Description This devices are made with TS
0.0NOATDEHO810.DE.3.65N0MI25.021Package Dimensions ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features φ10 LAMP LED. LOW POWER CONSUMPTION. CABINED VIEWING ANGLE.
More informationSeries AV. Pushbutton Switches NUT O-RING HOW TO ORDER
Pushbutton Switches SPECIFICATIS: BUSHING: 22mm. CTACT RATING: 2A @ 48VDC or 125VAC. ELECTRICAL LIFE: 10,000cycles at full load. CTACT RESISTANCE: 10m-ohms max. initial @2-4VDC. INSULATI RESISTANCE: 1,000M-ohms
More informationDistinctive Characteristics
Distinctive Characteristics Full face and spot illumination available. Front panel relamping. Choice of super bright LEDs in white, green, and blue in addition to bright red, amber, and green LEDs. Compact
More informationSPECIFICATIONS: MATERIALS: If your preferred product configuration is not shown, please contact our sales representative for custom design.
SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 50,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. initial @2-4VDC 00mA for both silver
More informationDistinctive Characteristics
Distinctive Characteristics Full face or spot illumination with incandescent lamps or multi-element LEDs, with or without resistors. Short Body Pushbuttons Series YB Choice of super bright LEDs in white,
More informationTP Series, Tiny. Features. Pushbutton Switches. Pushbutton Switches
TP Series, Tiny Features Compact design Round or rectangular actuator buttons. Vertical or versions Typical performance characteristics Contact configuration........................ SPST, SPDT, DPDT Contact
More informationSERIES SINGLE AND DOUBLE-POLE ROCKER SWITCHES
TO 0 (4) A 50 V AC PRODUCT FEATURES 100 million times proven switching principle mechanical life endurance up to 1 million switching cycles Wide variety Variants with IP 67 or dust protection insert Two
More informationSPECIFICATION PART NO. : LT8AW1-54-UEE3-TE-Z 0603 SMD CHIP LED
LEDTECH ELECTRONICS CORP. NANYA ROAD,MUGANG ZHAOQING CITY GUANGDONG CHINA. TEL:86-758-2875541,2870651,2877464,2876185,2877017 FAX:86-758-2878014 Http://www.ledtech.com.tw SPECIFICATION PART NO. : LT8AW1-54-UEE3-TE-Z
More informationseries Micro-signal switches
Product features Redundant contact system for high switching reliability by double contacting Self-cleaning contact system due to wiping contacting Center-zero version (basic type 1075) for detecting 3
More informationDistinctive Characteristics
Distinctive Characteristics Carefully designed light diffusion and filtering system produce bright, full surface illumination with front panel relamping. Spot illumination available in single and bicolor
More informationIndustrial Relay KML(1C, 2C)
Industrial Relay KML(1C, 2C) Features 1C: 15A, 2C: 10A switching capability 1.5kV dielectric strength (between coil and contacts) Various terminals available Socket available 1 & 2 poles configurations
More informationProduct Range. Rocker & Paddle Switches. Rocker & Paddle Switches. Rocker & Paddle Switches
Product Range for Panel Mounting: F, TRD and Gemini Series for PCB Mounting: Gemini Series Main features: Sealed or unsealed versions Various switch functions Gold or silver contacts LED illumination available
More informationDistinctive Characteristics
Distinctive Characteristics Wide selection of illumination effects is achieved with single and bicolor, - or -element LEDs, in flat, beveled, or sculptured caps. LED colors include red, amber, green, white,
More informationSeries WP. Pushbutton Switches HOW TO ORDER. Toggle Rocker Slide Pushbutton AV Rotary Tact Touch Key Miscellaneous
RATING: AC125V 7A, AC250V 4A. CIRCUIT: DPDT. CONTACT RESISTANCE: 20m-ohms max. @ 5VDC 1A. DIELECTRIC STRENGTH: AC 1,500V for 1 min. LIFE EXPECTANCY: 6-10 cycle / min. ELECTRICAL LIFE: 6,000 cycle. OPERATING
More informationFeatures. * 2 Form C contact. * High switching capacity 60W, 125VA. * Fit standard 16 pin IC socket. * Epoxy sealed for automaitc-wave COIL
JRC-27F SUBMINIATURE DIP RELAY Features File No.:E133481 * 2 Form C contact * High switching capacity 60W, 125VA * Fit standard 16 pin IC socket * Epoxy sealed for automaitc-wave soldering and cleaning
More informationWe Make It Easy! 3. All of our switches are shipped complete, just as ordered. No incomplete or partial deliveries of subcomponents and accessories
We Make It Easy! 1. We assemble the parts for you saves you time and money. Includes LEDs and accessories 2. Easy to order all options and accessories displayed in easy-to-follow ordering table. No complicated
More informationSPECIFICATION FOR APPROVAL
Xmultiple MARKETING GROUP R&D GROUP QA GROUP ISSUED BY CHECKED BY QA INSPECTION Gino De Xulong CUSTOMER: SAMPLE Q TY: CUSTOMER CUSTOMER APPROVAL: APPROVAL CONCESSIONARY REJECTED ISSUED BY CHECKED BY APPROVED
More informationMINIATURE SWITCHES. Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action)
Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action) MINIATURE SWITCHES PS SERIES 5 AMP. (S.P.) 1 AMP (D.P.) 0.4 VA DIRECT PANEL MOUNT Basic P/N Terminal Type Poles Cap
More informationSecurity Switches. Anti Vandal, Pushbutton. Specifications. Specifications S76 S77. Features.748 (19mm) bushing diameter
Anti Vandal, Pushbutton S76.287 (7.3) c: Screw (Assembled).098 (2.5) Typ.142 (3.6) Type Circuitry Action Actuator g 54 377 SPST NO OFF (ON) Stainless Steel, Flat S76b 54 378 SPST NO OFF (ON) Stainless
More informationOnly 35mm depth behind panel with built-in resistor
Lighted Pushbutton Switch R LED Only 5mm depth behind panel with built-in resistor Reliable Push-Feeling and valiable illumination Full-Face, Split-Face(,, ). FEATURES Depth behind panel : Only 5mm LED
More informationPushbutton Switches Sub-Miniature
Pushbutton Switches Specifications: Contact rating Mechanical life Maximum contact resistance Minimum insulation resistance Dielectric strength Operating temperature Materials: Case Plunger Bushing Housing
More informationDistinctive Characteristics
Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. Antistatic superstructure, consisting of the carbon impregnated bushing and
More informationMiniature Switches & Pilot Devices
A8 Series Miniature Switches and Pilot Devices: 8mm Key features of the 21/64" (8mm) A8 series Switches and Pilot Devices include: 21/64" (8mm) round mounting hole Compact Design Saves Space Bright and
More informationGeneral Purpose Relay
General Purpose Relay KML 15A switching capability 1.5kV dielectric strength (between coil and contacts) Various terminals available Socket available 1 to 3 pole configurations 1. COIL DATA (at 23 ) 1)
More informationAC 250V AC 250V AC 250V AC 250V DC 110V DC 110V DC 110V DC 110V Max. Allowable Current 15A 10A 10A 10A
Main Feature 1. 1 Pole to 4-Poles versions available with switching current at 15A (1 Pole) and 10A (2-4 Poles). 2. Printed Circuit Board Terminal, Plug-in Terminal and Flanged Case are designed for easy
More information9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview
A 9000 SERIES Overview 9 SERIES Number of poles 3 Single pole Electrical functions 2 Normally closed (NC) 3 Normally open (NO) Terminals, case and bushing Case height 8 (.314) 2 Straight terminals - threaded
More informationGeneral Specifications
Series WT Environmentally Sealed General Specifications Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical Capacity
More informationDistinctive Characteristics
Distinctive Characteristics Full face or spot illumination with incandescent lamps or multi-element LEDs, with or without resistors. Choice of super bright LEDs in white, green, and blue as well as bright
More informationProduct features. Mechanical life endurance
H Series 10 - Subsubminiature snap-action switches ip 67 Product features Compact design with dust and water protected switching system acc. to IP 67 (basic types 10 / 10) Large overtravel of 1.2 mm for
More informationSERIES 100 SWITCHES TOGGLE SWITCHES - MINIATURE. Phone: Fax: SPECIFICATIONS MATERIALS
TACT SERIES 100 - MINIATURE SPECIFICATIONS Contact Rating: Life Expectancy: Contact Resistance: Insulation Resistance: Dielectric Strength: See contact material options 40,000 make-and-break cycles at
More informationMINIATURE SWITCHES. Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action)
Sensitive Snap-Action Pushbutton Switches Solder and P.C. Terminals (Momentary Action) MINIATURE SWITCHES PS SERIES 5 AMP. (S.P.) 1 AMP (D.P.) 0.4 VA DIRECT PANEL MOUNT ONE POLE TWO POLE Basic P/N Terminal
More informationThrough Hole Lamp Product Data Sheet LTL916SYKSA Spec No.: DS Effective Date: 07/09/2011 LITE-ON DCC RELEASE
Through Hole Lamp Product Data Sheet LTL916SYKSA Spec No.: DS20-2008-0119 Effective Date: 07/09/2011 Revision: C LITE-ON DCC RELEASE BNS-OD-FC001/A4 LITE-ON Technology Corp. / Optoelectronics No.90,Chien
More informationANT. Materials. Features. Miniature Toggle
Specificationscations RoHS Compliant ANT Electrical Ratings Electrical Life Contact Resistance 5A @ 0VAC, 8VDC A @ 50VAC See Contact Options 50,000 cycles typical
More informationMechanical Key Switch
Mechanical Key Switch B3F A Wide Range of Models: 6 x 6 mm, 12 x 12 mm, Vertical and High-force. Excellent tactile feel combined with high life expectancy. Available in stick packaging for automatic mounting
More informationGeneral Specifications
Series UB Low Profile Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 5A @ 5/50V AC or 5A @ 0V C Logic Level (gold): 0.VA maximum @ 8V AC/C maximum (Applicable
More informationGeneral Specifications
Series UB Low Profile Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 5A @ 5/50V AC or 5A @ 0V C Logic Level (gold): 0.VA maximum @ 8V AC/C maximum (Applicable
More informationVH Super Miniature Lighted Pushbutton Switch. Only 10.6mm depth behind panel permits space saving on machinery.
Super Miniature Lighted Pushbutton Switch Only 10.6mm depth behind panel permits space saving on machinery. Flanged type for panel mounting and without flange type for PB available. FEATUES Depth behind
More informationDistinctive Characteristics
Distinctive Characteristics Various cap styles and colors to meet differing application needs. Bright, full face illumination to distinctively indicate status. Rear panel threaded mounting or snap-in mounter
More informationSnap Action Miniature Pushbutton Switches
Snap Action Miniature Switches SERIES 38C Miniature Switches FEATURES and Circuitry Choice of Bushings, and Terminations Caps and Frames Available UL Recoginized DIMENSIONS IN INCHES (AND MILLIMETERS)
More informationSPECIFICATION. Tung Andy Karen PART NO. : LT8AB3-43-UGE3-TD-Z 0805 SMD CHIP LED. Approved by Checked by Prepared by
LEDTECH ELECTRONICS CORP. NANYA ROAD,MUGANG ZHAOQING CITY GUANGDONG CHINA. TEL:86-758-2875541,2870651,2877464,2876185,2877017 FAX:86-758-2878014 Http://www.ledtech.com.tw SPECIFICATION. : LT8AB3-43-UGE3-TD-Z
More informationSERIES SUBMINIATURE SNAP-ACTION SWITCHES
PRODUCT FEATURES Small, effi cient snap-action switch up to 10 (1.) A 20 V AC or 10.1 A 12-20 V AC 1/4 HP Lateral approach from both directions possible due to mushroom-shaped actuator Large selection
More informationOnly 22.5mm depth behind panel with built-in resistor
Miniature Lighted Pushbutton Switch R Only.mm depth behind panel with built-in resistor Bright and Variable Illumination makes easy planning of multiple design. FEATURES Depth behind panel : Only.mm LED
More informationOnly 22.5mm depth behind panel with built-in resistor
Miniature Lighted Pushbutton Switch R Only.mm depth behind panel with built-in resistor Bright and Variable Illumination makes easy planning of multiple design. FEATURES Depth behind panel : Only.mm LED
More informationMICRO SWITCH ESS SERIES
MICRO SWITCH ESS SERIES FEATURES Small compact size suitable for electric equipment appliances and P.C.B. layout 2-piece spring mechanism design offering durable acute operation and long life Heavy/Light
More informationTOL-32EUG3W9-A. LED Lamp 2015/04/14 DL2EF3YG103-N J.F.FENG J.F.FENG Q.Y.HUANG
TOL-32EUG3W9-A LED Lamp 2015/04/14 DL2EF3YG103-N J.F.FENG J.F.FENG Q.Y.HUANG REV.: A-1 Prepared by J.F.FENG Released Date: 2015/4/15 Doc No : GL1412001 Page 1/7 TOL-32EUG3W9-A Lamp LED Part Number Material
More informationFunctions The Series 19 incorporates the following functions: Indicator Pushbutton Illuminated pushbutton
Edition 11/2013 HMI-Components 19 Series Characteristics The compact 8 mm Series 19 is especially suited for: Raised design PCB (with adaptor) The low level switching element is laid out for low current
More informationBright illumination face and snap-action switching.
ø A2 Series ø10 A1 Series ø8 A8 Series A2 Series A1 Series A8 Series Bright illumination face and snap-action switching. See website for details on approvals and standards. Hole Size Model Function Degree
More informationDATA SHEET QW0905-LHY22840/S11-PF/TBS-1 TAPE AND BOX TYPE LED LAMPS. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only REV.
TAPE AND BOX TYPE ED AMPS Pb ead-free Parts HY22840/S11-PF/TBS-1 DATA SHEET DOC. NO : QW0905-HY22840/S11-PF/TBS-1 REV. : A DATE : 23 - Jul.- 2006 Package Dimensions IGITEK EECTRONICS CO.,TD. Page 1/6 P2
More informationProduct Range. Keylock Switches. Keylock Switches. Keylock Switches
Product Range Medium Security : 2SWK, SKF Series High Security : SWK Series Main features: SPST type - 5 disc tumbler versions SPST type - 8 disc tumbler versions DPDT type - 4 disc tumbler versions All
More informationTURQUOISE SWITCHES J TYPE (ABJ)
HIGH ENVIRONMENTAL RESISTANCE TURQUOISE SWITCHES J TYPE (ABJ) Dust protected type Immersion protected type (wire leads bottom type) (Mounting hole 2.3mm.091inch type) (Mounting hole 2.3mm.091inch type)
More informationTURQUOISE SWITCHES J TYPE (ABJ)
HIGH ENVIRONMENTAL RESISTANCE ABJ1,2,3,4,5 TURQUOISE SWITCHES J TYPE (ABJ) Dust protected type Immersion protected type (wire leads bottom type) (Mounting hole 2.3mm.091inch type) (Mounting hole 2.3mm.091inch
More informationGeneral Specifications
Standard Size Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum
More informationGeneral Specifications
General Specifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V AC or 3A @ 250V AC or 3A @ 30V C Logic Level (gold): 0.4VA maximum @ 28V AC/C maximum (Applicable Range 0.1mA
More informationBENEFITS 782 STANDARD PART NUMBERS FEATURES 782 XDX M4L- 120A ORDERING CODE DPDT 10 AMP & 4PDT 3 & 5 AMP MINIATURE POWER RELAY FLAG INDICATOR:
SERIES 782XBX/XDX DPDT 10 AMP & 4PDT 3 & 5 AMP MINIATURE POWER RELAY FEATURES FLAG INDICATOR: L.E.D. STATUS LAMP: PUSH BUTTON: LOCK-DOWN DOOR: FINGER-GRIP COVER: I.D. TAG/WRITE LABEL: COVER ADAPTERS: BENEFITS
More informationGeneral Specifications
Series M eneral Specifications Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical apacity (Resistive Load)
More informationType List. Standard Type. High Power Type
Features 8A/1 miniature PCB Power Relay. Large contact gap : 2mm/. High dielectric strength and comply with IEC 16950. Epoxy seal type and sealed flux free are both available. Design for UPS and power
More informationLighted PushButton Switch
Lighted PushButton Switch Cylindrical 8mm dia. Subminiature Series Featuring Short Mounting Depth Round, square and rectangular LED pushbutton units. types also available. Requires only 18mm mounting depth.
More informationL1 = Solder terminal 2.8 x 0.5 mm Ø Behind panel
Raised design Emergency-stop switch, foolproof EN IEC 60947-5-5, IP 65 Equipment consisting of (schematic overview) L1 35.6 6 max. 59.5 41 18x24 Actuator Product can differ from the current configuration.
More informationHMI Components. Series. Indicator Illuminated pushbutton Mushroom-head pushbutton Key lock switch
Edition 10/2016 HMI Components Series Characteristics The compact Series is especially suited for: Flush design The large rectangular design (24x36mm) features a large illuminated area. Functions The Series
More informationDistinctive Characteristics
Distinctive Characteristics Subminiature size saves space on PC boards. Specifically developed for logic-level applications. ntistatic superstructure, consisting of the carbon impregnated bushing and the
More informationPower PCB Relay. Type Contact material Contact form Construction Part number General purpose AgCdO SPDT Semi-sealed G2R-1
Power PCB Relay Creepage distance of 8.0 mm (0.31 in) min. between coil and contact Dual-winding latching type available Plug-in and quick-connect terminals available High sensitivity (360 mw) and high
More informationOnly 21.5mm depth behind panel with LED Full Face, Illumination.
R LED Lamp Subminiature Lighted Pushbutton Switch Only 21.5mm depth behind panel with LED Full Face, Illumination. FEATURES Depth behind panel:only 21.5mm. LED Full Face Illumination provided. size: 14.2mm
More informationD2SW-AQ. Sealed Subminiature Basic Switch Conforming to IP67 (Excluding the terminals on terminal models) Model Number Legend
Sealed Subminiature Basic Switch Conforming to IP67 (Excluding the terminals on terminal ) Use of epoxy resin assures stable sealing, making this switch ideal for places subject to water spray or excessive
More informationGeneral Specifications
Series UB Low Profile Pushbuttons General Specifications Electrical Capacity (Resistive Load) Power Level (silver): A @ /0V AC or A @ 0V C Logic Level (gold): 0.VA maximum @ 8V AC/C maximum (Applicable
More informationDescription. Applications
3.5x2.8mm SURFACE MOUNT LED LAMP Features Package Dimensions ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Industry standard PLCC-4 package. High reliability LED
More informationSelection Guide Automotive Relays
Selection Guide Automotive Relays Classification Ultra-Miniature PCB Relay Model G8N1 G8ND2 G8NW Features Fully sealed construction Twin automotive relay Fully automated assembly suitable for polarity
More informationTechnical Data Sheet Full Color Top LEDs
Features P-LCC-4 package. White package. Optical indicator. Colorless clear window. Pb-free. The product itself will remain within RoHS compliant version. Descriptions The 67-23 series is available in
More informationø10 A1 Series Miniature Control Units
A1 ø10 A1 Series Miniature Control Short 22-mm-long body miniature control unit series with LED illumination face and snap-action switching. Bright and clear LED illumination. All series have terminals
More informationQuick Reference Guide Green Pushbutton and Toggle Series Switches
Quick Reference Guide Green Pushbutton and Toggle Series Switches The Green Series switch offering includes both pushbutton and toggle switches all rated to 6A/3A@125/250VAC and 4A@28VDC. The life expectancy
More informationE Series Sealed Miniature Rocker and Lever Handle Switches
Sealed Miniature and Lever Handle Switches Features/Benefits Sealed against solder and cleaning process contaminants ESD Resistance all actuator options, case & bushing UL 94V-0 RoHS compliant Typical
More informationSubminiature Basic Switch
Subminiature Basic Switch Subminiature Basic Switch Offers Long Life and High Reliability A design that combines simplicity and stability by the use of two split springs ensures a long durability of 30,000,000
More informationEVERLIGHT ELECTRONICS CO., LTD.
Features Side view white LED White SMT package Lead frame package with individual 2 pins Wide viewing angle Soldering methods: IR reflow soldering Pb-free The product itself will remain within RoHS compliant
More informationTechnical Data Sheet Chip LED with Bi-Color(Multi-Color)
Technical Data Sheet Chip LED with Bi-Color(Multi-Color) Features Package in 8mm tape on 7 diameter reel. Compatible with automatic placement equipment. Compatible with infrared and vapor phase reflow
More informationIP series Latching action pushbutton switches for harsh environments
Latching action pushbutton switches for harsh environments Distinctive features and specifications Latching action Actuator remains in the low position when ON. Illuminated and non-illuminated Compact
More informationSealed pushbutton switches - bushing Ø 16 mm - momentary
Sealed pushbutton switches - bushing Ø 16 mm - momentary Distinctive features The IR series is a range of sealed momentary pushbutton switches with dia. 16 mm bushing. This series is divided into 2 families
More informationSPECIFICATIONS FOR UPEC SMD TYPE LED
SPECIFICATIONS FOR UPEC SMD TYPE LED MODEL: Features P-LCC package Wide viewing angle Inter reflector Available on tape and reel ( 8mm Tape ) Package Dimensions Notes 1. All dimensions are in millimeters
More information8500 Series Subminiature Pushbutton Switches
Subminiature Switches Features/Benefits Pre-travel or over-travel models available Ratings up to 3 AMPS Reliable contact design RoHS compliant Typical Applications Detection Telecommunications and networking
More informationYB2 Panel Seal. New Square Actuator Option. Series YB2. Contact No Thin Flush Mount Pushbuttons. 24mm Square Panel Seal Pushbuttons
Contact No. 182 YB2 Panel eal Thin Flush Mount Pushbuttons New quare Actuator Option 2011-01-26 www.nkk.com 1 General pecifications Electrical Capacity (Resistive Load) Power Level (silver): 3A @ 125V
More informationStorage Temp. ( C) Red D. Current DC (ma) Voltage Vac/dc
features specifications Ø8.1mm mounting Product will operate over a wide voltage range Robust stainless steel housing, Sealed to IP67 Colour diffused lens Full internal potting to resist shock & vibration
More informationGeneral Specifications
Series HB Subminiature Pushbuttons General Specifications Electrical apacity (Resistive Load) Power Level (silver): 0.1A maximum @ 30V A/ Other Ratings ontact Resistance: 50 milliohms maximum Insulation
More informationKSB & KSF Series Low-profile Tact Switch
KS & KSF Series Low-profile Tact Switch Features/enefits Low profile Protected against flux KS without top sealing KSF with top sealing RoHS compliant and compatible Typical Applications Low profile keyboards
More informationB3F. Miniature, Space-saving Switch
B3F Miniature, Space-saving Switch Long mechanical / electrical service life Ideal for applications such as audio, office and communications equipment, TVs, etc Taped radial, vertical, high-force, and
More informationSPECIFICATIONS MATERIALS. NONE = Black WHT= White RED = Red M1 M3 M5. YEL = Yellow. GRY = Gray PUR = Purple. **Contact E-Switch for additional colors
SERIES 300 AND PADDLE - MINIATURE FEATURES & BENEFITS Multiple rocker & paddle options Up to 4 poles Multiple termination options Snap-in panel mount option available HOW TO ORDER APPLICATIONS/MARKETS
More informationDPDT BTA12-2C-S-C BTA12-2C-S-CL BTA12-2C-S-CLM SPST-NO-DM BTA12-1X-S-C BTA12-1X-S-CL BTA12-1X-S-CLM
FEATURES Plug-in relay Quick connect receptacles or direct soldering. PCB terminals are also acceptable. Large capacity 30A contact rating. Optional blowout magnet: high dc switching. Wide spacing between
More informationSERIES MINIATURE SNAP-ACTION SWITCHES
PRODUCT FEATURES The precise mounting of the moving contact part (milled bearing blade) offers optimum snap-action even with slow actuation Wide range of ratings from 3 (1) A 250 V AC to 21 (8) A 250 V
More informationS E C Q - E - S T 1-2. Cap/ Sealing Hood (STD) 8.89 B solder lug Q (none) (none) Rubber Hood
T 8 0 1 3 - S E C Q - E - S 2 0 - T 1-2 Switch Function (SPDT) Actuator Bushing Termination Contact Switching Position Model No. S 10.41 E Epoxy Seal Vertical Support Bracket Cap/ Sealing Hood (STD) 8.89
More informationType List. Standard Type. High Power Type. Designation (provided with) Terminal style Contact form Contact gap
Features 8A/1 miniature PCB Power Relay. Large contact gap : 2mm/. High dielectric strength and comply with IEC 16950. Epoxy seal type and sealed flux free are both available. Design for UPS and power
More informationø8 A8 Series Miniature Control Units
A8 ø8 A8 Series Miniature Control Short 22-mm-long body miniature control unit series with LED illumination face and snap-action switching. Bright and clear LED illumination. All series have terminals
More informationDATA SHEET TAPE AND REEL TYPE LED LAMPS. LIGITEK ELECTRONICS CO.,LTD. Property of Ligitek Only LG2040-PF/TRS-X REV. : DATE : 21 - Feb.
TAPE AND REEL TYPE LED LAMPS Pb Lead-Free Parts LG2040-PF/TRS-X DATA SHEET DOC. NO : REV. : QW0905- LG2040-PF/TRS-X A DATE : 21 - Feb. - 2006 PART NO. Package Dimensions LIGITEK ELECTRONICS CO.,LTD. LG2040-PF/TRS-X
More informationTwo case lengths. Three electrical functions. Sealing options. Model X1146 with Ø 16 (.630) bushing ELECTRICAL SPECIFICATIONS.
Distinctive features and specifications Two case lengths Three electrical functions Sealing options Model X1146 with Ø 16 (.630) bushing Max. current/voltage rating with resistive load : - silver contact
More informationNew Bicolor Alternating Legends
Contact No. 17 New Bicolor KP01 & KP0, NP01 & UB eries KP01 & KP0 ERIE NP01 ERIE UB ERIE Blue LED Illumination Amber LED Illumination 013-07-05 eries KP, NP01, & UB Extensive Variety Bicolor LED Illumination
More informationHigh reliability EH-N type
/ EH-N Miniature Lighted Pushbutton Switch RoHS EH Only.mm depth behind panel with built-in resistor Bright and Variable Illumination makes easy planning of multiple design. FEATURES Depth behind panel
More informationSP1-T100B1M1QE MINIATURE TOGGLE SWTH SPDT (RC)
DATA SHEET Order code Manufacturer code Description 75-0211 100-SP1-T100B1M1QE MINIATURE TOGGLE SWTH SPDT (RC) The enclosed information is believed to be correct, Information may change without notice
More information