Product features. Mechanical life endurance
|
|
|
- Toby Hunter
- 5 years ago
- Views:
Transcription
1 H Series 10 - Subsubminiature snap-action switches ip 67 Product features Compact design with dust and water protected switching system acc. to IP 67 (basic types 10 / 10) Large overtravel of 1.2 mm for small size The specially designed pushbutton guide enables a start-up angle of 40 The modular principle offers a wide selection of terminals, auxiliary actuators and fastening types On request Rating 0. (0.) A 20 V AC 2E3 and ENEC approval mark For higher ambient temperatures Customized cable assembly Basic type 10 as double switch or with cable outlet in other directions Mechanical life endurance E Contact resistance (new condition) < 0 mohm (1 A 12 V DC) Insulation resistance (new condition) > 100 MOhm (00 V DC) Protection type IP 00 terminal side basic types 10 and 106 IP 40 actuator side basic type 106 IP 67 actuator side basic type 10, terminal and actuator side basic type 10 Ambient temperature -40 C... + C Flammability UL 4 HB Material actuator additional actuator housing terminals POM / LCP / silicone rubber stainless steel spring steel PBTP tinned basic type 10: wires flry 0. mm², tinned wire ends Contact material Ag gold plated Approval marks 7 on request Shock resistance 0 g Miscellaneous terminal side sealed electrical life endurance at 24 V DC 2 A (ohmic load): 100E3, at 24 V DC 10 ma: 00E3 \ 17
2 H Series 10 - Subsubminiature snap-action switches ip 67 4 A 12 V DC (ohmic load) Normally closed contact (SPNC) 2 A 24 V DC (ohmic load) Normally open contact (SPNO) 0. (0.) A 20 V AC 2E3 Terminal type Terminal description 400 long crimped Operating force (N) Operating position (OP) (mm) Difference travel max. (mm) Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches Free position (FP) max. (mm) Permissible total travel position (TP) (mm) Actuator description Lever drawing Miscellaneous 1..4 ± pin right 1. long long 1..4 ± pin right 1. long long 1..4 ± pin both sides long Changeover switch (SPDT momentary) ± pin right 1. long ± pin left long ± without pin ± pin right 1. long ± pin right 2. long ± pin left 2. long ± L21 pin both sides 2. long ± L02 without pin ± L21 pin right 2. long ± pin right 1. long ± pin right 1. long ± without pin 10. ± without pin ± pin right 1. long ± pin left 1. long long 1..4 ± pin right 1. long Stock version Rocker switches long 1..4 ± pin both sides long long 1..4 ± pin both sides 2. long long ± L31 pin both sides 2. long 17 ]
3 H Series 10 - Subsubminiature snap-action switches ip 67 TP 7. OP.4±0.3 ø TP 7. OP.4±0.3 ø Basic type ø2. Solder terminal ø TP 7. OP.4± ø2..6 right angled x ø ø3. 2. ø2. 1. ø2. TP 7. OP.4± left angled ø2. 0. ø x4 \ 10
4 H Series 10 - Subsubminiature snap-action switches ip 67 TP 4.6 OP 6.1±0.3 FP 7.1 ø TP 4.6 OP 6.1±0.3 FP 7.1 ø Rocker switches Basic type 106 Basic type ø2. Solder terminal x0. ø.6 4. TP OP 10.±0.3 FP 11. right angled 300 TP 4.6 OP 6.1±0.3 FP (0.7) ø Cable 300 long 2. ø ø2. ø ø3..0 ø2. ø ø2. Sensors micro-signal switches Snap-action switches Tact and Key switches Foot switches Rotary switches Slide switches Toggle Switches Pushbutton switches TP 4.6 OP 6.1±0.3 FP 7.1 ø2. left angled 0.2x ø2. ø3..0 ø 11 ]
5 H Series 10 - Subsubminiature snap-action switches ip Approach angle up to 40 Auxiliary actuators The auxiliary actuators are available as additional parts for the basic types 10 and 10 for retrofitting or are already pre-assembled depending on the product. When assembling yourself, make sure that the lever is pushed into the housing slot right up to the stop. The robust pushbutton guide allows actuations by slides or camshafts with an approach angle of < 40 (depending on the friction partner). The mechanical life endurance depends on the material and surface properties of the slide and the installation situation in the appliance. Under optimum conditions and longitudinal actuation, 200E3 cycles can be achieved. The above sketch can be transposed to the basic types 106 and 10. MP L02: straight lever MP 17.2 L31: differential lever TP TP.3.7±0.4 OP 11.6 FP OP.7±0.4 FP 11. L21: simulated roller TP 12.4±0.6 OP 14.7 FP fastening disc for the basic types 10, 106 und 10 Fastening disc The fastening disc offers a quick, reliable fastening possibility in combination with switches with mm long pins to plates or plastic parts with a wall thickness up to 2. mm. \ 12
SERIES SUBSUBMINIATURE SNAP-ACTION SWITCHES IP 67
SERIES 10 - SUBSUBMINIATURE SNAP-ACTION SWITCHES IP 67 PRODUCT FEATURES Compact design with dust and water protected switching system acc. to IP 67 (basic types 10 / 10) Large overtravel of 1.2 mm for
series Micro-signal switches
Product features Redundant contact system for high switching reliability by double contacting Self-cleaning contact system due to wiping contacting Center-zero version (basic type 1075) for detecting 3
SERIES SINGLE AND DOUBLE-POLE ROCKER SWITCHES
TO 1 (4) A 50 V AC ROCKER SWITCHES PRODUCT FEATURES 100 million times proven switching principle High, fl exible design variety Excellent actuating characteristic Illuminated and non-illuminated variants
SERIES SINGLE AND DOUBLE-POLE ROCKER SWITCHES
TO 1 (4) A 50 V AC PRODUCT FEATURES 100 million times proven switching principle High, fl exible design variety Excellent actuating characteristic Illuminated and non-illuminated variants ON REQUEST Other
SERIES SUBMINIATURE SNAP-ACTION SWITCHES
PRODUCT FEATURES Small, effi cient snap-action switch up to 10 (1.) A 20 V AC or 10.1 A 12-20 V AC 1/4 HP Lateral approach from both directions possible due to mushroom-shaped actuator Large selection
SERIES MINIATURE SNAP-ACTION SWITCHES
PRODUCT FEATURES The precise mounting of the moving contact part (milled bearing blade) offers optimum snap-action even with slow actuation Wide range of ratings from 3 (1) A 250 V AC to 21 (8) A 250 V
SERIES SINGLE AND DOUBLE-POLE PUSHBUTTON SWITCHES
PRODUCT FEATURES Illuminated and non-illuminated pushbutton switch Proven jump contact switching system (double interrupting) Opening and closing speed independent of the actuating speed Product-dependent
SERIES SINGLE AND DOUBLE-POLE ROCKER SWITCHES
TO 0 (4) A 50 V AC PRODUCT FEATURES 100 million times proven switching principle mechanical life endurance up to 1 million switching cycles Wide variety Variants with IP 67 or dust protection insert Two
SUB-SUBMINIATURE MICROSWITCHES - SEALED
SWITCHES.CROUZET.COM MICROSWITCHES /8 SUB-SUBMINIATURE MICROSWITCHES - SEALED V5S - 83 High precision flexible leaf snap-action mechanism Operation without balance-point, even at extremely slow actuating
SOLDER SHORT SOLDER SCREW
32 Honeywell MICRO SWITCH Sensing and Control For application help: call 1-800-537-6945. CUT-A-WAY V3 MINIATURE BASIC SWITCH GENERAL INFORMATION V3 miniature basic switches feature high electrical capacity
MINIATURE MICROSWITCHES - STANDARD
0/08 MINIATURE MICROSWITCHES - STANDARD VD - 8 C-spring snap-action mechanism with wiping contacts Ratings from 0.0 A Vc up to A 0 Va and hp Va / hp 0 Va Broad range of operating forces from 0. N to N
Series 300. Miniature Rocker & Paddle Switches
Series 00 SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 0,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. inital @ -VDC. 00mA for both
SERIES 16, 18, 26 & 19N MICROSWITCH RANGES
SERIES 16, 18, 26 & 19N MICROSWITCH RANGES SERIES 16, 26 & 18 - MICROSWITCH SERIES 16 & 26 FEATURES Form Z contacts to cover all switching requirements Snap action for positive switching Solder terminals
Microswitch - SERIES MP500
Microswitch - SERIES MP500 MP500 A subminiature microswitch of standardized small dimensions. The MP500 Series provides long mechanical service, small differential travel and wide temperature range up
Miniature microswitches - Positive break
1 Miniature microswitches - Positive break 81607 Coil spring snap-action mechanism with wiping contacts Positive opening action according to IEC 6097-5-1 Annex K atings from 10 ma Vc to 6 A 250 Va Very
l Snap-Action Switches
Connect - Contact - Control 2 Brochure l Snap-Action Switches Snap-action switches I Page 2 Page 3 I Snap-action switches Double Safety A sky diver's life depends on his equipment. In case of emergency
S840, S845, S846 Series Single-break changeover, NC or NO contacts, positive opening operation and wiping action Catalogue D40.en
Snap-action switches S80, S85, S86 Series Single-break changeover, NC or NO contacts, positive opening operation and wiping action Catalogue D0.en Snap-action switches, S80, S85, S86 Series Single-break
02/11/2015
V4 8318 Sealed Dual-current 83181 Part number made to order IP 67 protection Nominal ratings 0.1 A to 10 A / 250 VAC Minimum rating 1 ma / 4 VDC Operating temperature -40 C to +125 C Choice of actuators
Ordering Information. Snap Action Switch D2F. Subminiature Snap Action Switch D2F- Model Number Legend. Snap Action Switch D2F 31
Snap Action Switch Subminiature Snap Action Switch Switches 3 A loads (general-purpose), 1 A loads (low force general-purpose) and 0.1 A loads(microvoltage/ microcurrent) Long life span assured by high-precision
HL (AZH) LIMIT SWITCHES
COMPACT SIZE LIMIT SWITCHES LIMIT SWITCHES U L PRODUCT TYPE 1. Limit Switches Actuator Type Push plunger Roller plunger Cross roller plunger Panel mount push plunger Panel mount roller plunger Panel mount
SPECIFICATIONS: MATERIALS: If your preferred product configuration is not shown, please contact our sales representative for custom design.
SPECIFICATIS: CTACT RATING: Refer to "Contact Material Options" for more info. ELECTRICAL LIFE: 50,000 make-and-break cycles at full load. CTACT RESISTANCE: 0m max. initial @2-4VDC 00mA for both silver
Series LP. Illuminated Pushbutton Switches HOW TO ORDER SPECIFICATIONS: WPL-25
SPECIFICATIONS: CONTACT: Silver contact (Gold plated). ELECTRICAL RATING: AC125, 2V 1A @ resistive load). INSULATION RESISTANCE: More than Mohms at DC 0V. DIELECTRIC STRENGTH: a. 0V RMS(/60Hz) between
Microswitch - SERIES MP110
Microswitch - SERIES MP0 Description MP0 Approval EN 6058-50VAC/5A 50 000 cycles EN 6058-00VAC/0A 50 000 cycles UL 6058-50VAC/5A 50 000 cycles UL 6058-00VAC/0A 50 000 cycles Resistive load MP0 Sealed basic
Series S847 Changeover switches featuring wiping, galvanically isolated, double-break contacts and positive opening operation Catalogue D47.
Snap-action switches Changeover switches featuring wiping, galvanically isolated, double-break contacts and positive opening operation Catalogue D47.en Snap-action switches, S847 Series Dual changeover
S826, S926 Series Dual changeover switches with positive opening operation and wiping contacts Catalogue D26.en
2 Snap-action switches S826, S26 Series Dual changeover switches with positive opening operation and wiping contacts Catalogue D26.en 2 Snap-action switches S826 Series Dual changeover switches with positive
AM5 (QV) SWITCHES AM5
MINIATURE SWITHES WITH HIGH PREISION (QV) SWITHES 5.9 FEATURES High precision as a result of designing ideal spring by using computer analysis O.P. 4.7±0.4mm Reliable design with shock resistance min.
Contacts NEMA A600, 10A thermal. Contacts NEMA Q600, 5A thermal. Low energy contacts gold plated. Minimum PUSHBUTTON
Pilot Devices Technical data UL General UL technical data Contact blocks Rated insulation voltage, UL 600V Rated thermal current 10A / 600VAC 2.5A / 600VDC Minimum rating 24VDC, 5mA Mechanical life (millions
Momentary pushbutton switches - round plunger
1200 series Momentary pushbutton switches - round plunger Distinctive features and specifications Butt action contacts, double break NF (EN 61058-1), UL and CSA approved ELECTRICAL SPECIFICATIONS Max.
Product features & Overview. N1 - N4 A Rotary and part-turn actuators
Product features & Overview N1 - Rotary and part-turn actuators 20 N1 - Rotary and part-turn actuators Rotary and part-turn actuators Product features Wide torque range Wide selection of output shafts
Basic, Toggle, and Rocker Switches Product Range Guide
Basic, Toggle, and Rocker Switches Product Range Guide For innovation that s well apart, there s only Honeywell With more than 50,000 products ranging from snap-action, limit, toggle, and pressure switches
Snap-Action, Toggle, & Rocker Switches SENSING AND CONTROL. Product Range Guide
Snap-Action, Toggle, & Rocker Switches SENSING AND CONTROL Product Range Guide 1 For innovation that s well apart, there s only Honeywell Sensing and Control. With more than 50,000 products ranging from
D2SW-AQ. Sealed Subminiature Basic Switch Conforming to IP67 (Excluding the terminals on terminal models) Model Number Legend
Sealed Subminiature Basic Switch Conforming to IP67 (Excluding the terminals on terminal ) Use of epoxy resin assures stable sealing, making this switch ideal for places subject to water spray or excessive
S870, S970 Series. Snap-action switches. Positive opening operation Self-cleaning contacts Catalogue D70.en
Snap-action switches S870, S970 Series Snap-action switches Positive opening operation Self-cleaning contacts Catalogue D70.en Snap-action switches S870/S970 Series Single break SPDT switches with positive
Data Sheet for Precision Potentiometer
The RP22/23 potentiometers in 22 mm metal housing are suitable for applications where a accurate and compact sensor with high electrically effective rotation angle is required. Accurate wirewound potentiometer
SEK Solder board connectors
Solder board connectors Technical characteristics 6, 10, 14, 16, 20, 26, 30*, 34, 40, 50, 60, 64 Contact arrangement straight, angled Contact length 2.9 mm, 4.5 mm Approvals IEC 603-13 DIN EN 60 603-13
TURQUOISE STROKE SWITCHES
ULTRA-LONG STROKE, HIGH CONTACT RELIABILITY SEALED SWITCHES (SAME SIZE AS J TYPE) ASQ1 TURQUOISE STROKE SWITCHES 9.6 13.3 FEATURES (mm) http://panasonic-denko.co.jp/ ac/e/service/environment 1. Same size
Limit Switches 1-1 thru Safety Switches 2-1 thru Index 3-1
Limit Switches - thru -6 Safety Switches - thru -0 Index 3-3 i Industrial Limit Switches Basic Technical Concepts / 8385 / 83853 Miniature Industrial Limit Switches, Positive Opening /4 8386 Industrial
Turquoise Stroke Switches
Long Stroke and Sliding Contact Construction Sealed Switches Turquoise Stroke Switches 13.3 10.1 (Unit: mm) RoHS compliant FEATURES For pin plunger, it maintains a long stroke OT (Over Travel) with over
Toggle Switches. 214 Switches. Nylon and Metal switch variants. Multiple Lever Options. Ratings up to 20A, 250V ac - 277V ac
Toggle Switches Well known for their quality and reliability, Bulgin s toggle switches are cost effective solutions to many existing applications. These switches offer features at an attractive price point
BETA Switching Switches and Light Indicators
Siemens AG 2008 BETA Switching /2 Product overview /3 5TE8 control switches / 5TE4 pushbuttons /2 5TE5 light indicators /5 5TE8 ON/OFF switches /22 5TE9 busbars /24 5TE switch disconnectors Siemens ET
SL (AZ3) Micro Limit Switches
SUBMINIATURE SIZE LIMIT SWITCHES SL (AZ3) Micro Limit Switches Quickly upgraded to limit switches with lamps by mounting an LED lamp socket. Rubber cover type (roller ) Compliance with RoHS Directive FEATURES
Pressure Control, Differential Pressure Control, Type RT
MAKING MODERN LIVING POSSIBLE Data sheet Control, Control, Type RT An RT control contains a operated single-pole changeover contact, the position of which depends on the in the inlet connection and the
Rocker Switches & Twin R13. Miniature rocker switch. Ultra thin rocker switch. Ratings up to 10A, 250Vac. High inrush tolerance
Rocker Switches Ultra thin rocker switch Ratings up to 15A, 250Vac Single and twin gang single: 17.4 x 6.8mm twin: 17.4 x 13.4mm Miniature rocker switch Ratings up to 15A, 250Vac High in-rush tolerance
Conectores Rectangulares
Conectores Rectangulares Serie G SUMINISTROS INDustriales MP4 S.L. TEL. +34 93 590 94 77 c/adrià Gual, 10 local 2 08173 Sant Cugat del Vallès Barcelona (Spain) www.suministros-industriales.es e-mail: mp4@suministros-industriales.es
Turquoise Stroke Mini Switches
Long Stroke, Sliding Contact Construction Sealed Switches Turquoise Stroke Mini Switches 5.3 (Unit: mm) 7.85 5.3 Terminal 13.55 Wire leads RoHS compliant FEATURES Miniaturization achieved with changing
Contacts NEMA A600, 10A thermal. Contacts NEMA Q600, 5A thermal. Wire size
Technical data UL Pilot Devices General UL technical data Contact blocks Rated insulation voltage, UL 600V Rated thermal current 10A / 600VAC 2.5A / 600VDC Minimum rating 24VDC, 5mA Mechanical life (millions
HL (AZH) Limit Switches
COMPACT SIZE LIMIT SWITCHES HL (AZH) Limit Switches Wide selections of actuators, terminals and bodies to meet any application Excellent environmental resistance Die casting caseiec IP67 Plastic caseiec
Control Buttons / Switches for Panel Mounting Series 8003
www.stahl.de > Different actuators pushbutton mushroom pushbutton mushroom stay-put button mushroom stay-put button with key lock key-operated button key-operated switch > 2 contact elements > Spring clamp
Type 3761 Pneumatic or Electropneumatic Positioner for Rotary Actuators. Fig. 1 Type 3761 Positioner. Mounting and Operating Instructions EB 8386 EN
Type 3761 Pneumatic or Electropneumatic Positioner for Rotary Actuators Fig. 1 Type 3761 Positioner Mounting and Operating Instructions EB 8386 EN Edition July 2007 Contents Contents Page 1 Design and
General_technical_data Series
Indicator actuator 2 500 Hz: 5 g Pushbutton actuator Lens flat/level with front bezel: - Momentary max. 3 600/h - Maintain max. 1 800/h Lens flat/raised above front ring: - Momentary max. 3 600/h - Maintain
LUMOTAST 25 selector switch 1-28 LUMOTAST 25 selector switch, Click quick-assembly feature 1-29 LUMOTAST 25 selector switch, ring nut fixing 1-29
General data TAST pushbutton range Illuminable pushbuttons and signal lamps. Please order lamps/leds separately. Mounting hole diameter: 6.2 mm 42 V/00 ma max. Water-jet proof IP65 Low profile Lamp socket
Series. Robust and attractive.
Series 82 Robust and attractive. www.eao.com Series 82 Robust and attractive. With Series 82, EAO offers the optimal pushbutton for vandal-resistant, stylish HMI controls used in harsh industrial environments,
CIT SWITCHTM ANT SPECIFICATIONS
Wide variety of applications from consumer electronics to commercial Standard epoxy sealed terminations Gold contacts available for low power applications Available support brackets for greater stability
the Interactive Catalog
Interactive Catalog Supplements Catalog PDFs If you need detailed product information, or help choosing the right product for your application, see our Interactive Catalog Use the Interactive Catalog to
RPPN3 - RPPN7 Industrial pressure switch
Main Features Excellent repeatability Dead band adjustment for regulation Fix dead band for control and alarm Applications Energy safety equipment Power generation safety equipment Pressurized chambers
MICRO SWITCH ESS SERIES
MICRO SWITCH ESS SERIES FEATURES Small compact size suitable for electric equipment appliances and P.C.B. layout 2-piece spring mechanism design offering durable acute operation and long life Heavy/Light
l Snap-Action Switches
Connect - Contact - Control 2 Brochure l Snap-Action Switches Snap-action switches I Page 2 Page 3 I Snap-action switches Double Safety A sky diver's life depends on his equipment. In case of emergency
Control Device System NEC Series ConSig 8040
16113E00 > Enclosure made of glass fibre reinforced polyester resin > Modular design > 3 sizes available > Individual units can be combined into larger units > Standard and customer-specific versions >
Position switches FC series
A Position switches FC series Selection diagram 0 08 8 9 0 0 0 Ø 8 mm Ø, mm external rubber stainless steel stainless steel fiber glass rod gasket sphere sphere 6 adjustable lever safety adjustable lever
ROTARY SWITCHES. Quality Features: LIGHTED ROTARY UP TO 3 POSITIONS WITH 3 OPTIONAL, INDEPENDENT LED LIGHT POSITIONS, 1.45 X.
SWITCH R2 UP TO 3 POSITIONS WITH 3 OPTIONAL, INDEPENDENT LED LIGHT POSITIONS, 1.45 X.83 PANEL CUTOUT Used in the heavy equipment, marine, process control and instrumentation markets the R2 rotary switch
Series R19. Power Rocker Switches MARK OPTIONS COLOR OPTIONS TERMINATION OPTIONS HOW TO ORDER
CONTACT RATING: 6A 250VAC 10A 125VAC. ELECTRICAL LIFE: 10,000 Operations. MECHANICAL LIFE: 50,000 Operations. CONTACT RESISTANCE: 1,000M-ohms. DIELECTRIC STRENGTHS: >1,500
TURQUOISE SWITCHES J TYPE (ABJ)
HIGH ENVIRONMENTAL RESISTANCE TURQUOISE SWITCHES J TYPE (ABJ) Dust protected type Immersion protected type (wire leads bottom type) (Mounting hole 2.3mm.091inch type) (Mounting hole 2.3mm.091inch type)
TURQUOISE SWITCHES J TYPE (ABJ)
HIGH ENVIRONMENTAL RESISTANCE ABJ1,2,3,4,5 TURQUOISE SWITCHES J TYPE (ABJ) Dust protected type Immersion protected type (wire leads bottom type) (Mounting hole 2.3mm.091inch type) (Mounting hole 2.3mm.091inch
TURQUOISE SWITCHES ABJ TYPE
HIGH ENVIRONMENTAL RESISTANCE ABJ1,2,3,4,5 TURQUOISE SWITCHES ABJ TYPE.5 12.8 Dust protected type Iersion protected type (wire leads bottom type) (Mounting hole 2.3 type) (Mounting hole 2.3 type) FEATURES
AM1 (NZ BASIC) SWITCHES
HIGH CONTACT CAPACITY, PRECISE OPERATION AM1 (NZ BASIC) SWITCHES 24.1 FEATURES 15 A High current switching capacity and high precision Wide allowance of operating speed Versatile variety of actuators UL/CSA
Overview of types. Technical data. Safety notes
echnical data sheet LH4A-S-P.. Linear actuators for adjusting air dampers and slide valves in ventilation and air-conditioning systems for building services installations For air dampers up to approx.
General Specifications
Series WT Environmentally Sealed General Specifications Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical Capacity
Product features & Overview. KA Linear actuators
Product features & Overview Linear actuators 66 Linear actuators Linear actuator Product features Wide range of force outputs Solid metal housing Large stroke range Maintenance-free gearbox Wide range
Switches. SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY 115VAC, 28VDC)
SWITCH SELECTION GUIDE Toggle Switches SERIES FEATURE ACTUATION MAX RATING SEAL RATING MOUNTING CIRCUITRY (Resistive @ 115VAC, 28VDC) T1 2 or 3 Position, Momentary, 8A MIL-PRF-83731 15/32" or 1/4" dia.
KSB & KSF Series Low-profile Tact Switch
KS & KSF Series Low-profile Tact Switch Features/enefits Low profile Protected against flux KS without top sealing KSF with top sealing RoHS compliant and compatible Typical Applications Low profile keyboards
FL series position switches
FL series position switches Selection diagram 0 08 0 9 0 0 0 Ball Ø. External rubber Ball Ø 8 mm, mm, stainless Glass fibre rod gasket stainless steel steel Adjustable lever Adjustable safety lever Bistable
TURQUOISE STROKE SWITCHES
Long Stroke and Sliding Contact Construction Sealed Switches TURQUOISE STROKE SWITCHES 13.3 10.1 (Unit: ) RoHS compliant FEATURES For pin plunger type, it maintains a long stroke OT (Over Travel) with
VL Series. General Purpose Compact Limit Switches. Sensing and Control
FEATURES Gold plated silver contacts Compact design for small mounting space. Special design for easy wiring with ample wiring space Two-circuit double-break Diecast base and plastic cover Standard mounting
onlinecomponents.com VL Series General Purpose Compact Limit Switches Sensing and Control
FEATURES Gold plated silver contacts Compact design for small mounting space. Special design for easy wiring with ample wiring space Two-circuit double-break Diecast base and plastic cover Standard mounting
RPPN6 - RPPN8 Industrial pressure switch with high overpressure resistance
Main Features Excellent repeatability Dead band adjustment for regulation Fix dead band for control and alarm Overpressure up to 100 bar Applications Energy safety equipment Power generation safety equipment
Accessories. Technical Data Extension Height 2" Material. Stainless Steel. Bearing TR LRB (X) ARB (X) TF LF AF. Extension Bracket CCV-EXT-Kit
The CCV-EXT-KIT can be used with most CCV s* and PICCV in order to achieve a large clearance over the pipe. The Extension Kit will provide an additional 2 of space between the top of the valve and the
LUMOTAST FK. General data. Content
General data TAST illuminated pushbutton range Illuminable pushbuttons and signal lamps with lamp socket T /T / 4. Please order lamps / LEDs separately. Mounting hole diameter 6.2 mm 42 V/00 ma max. Water-jet
Indicator body single with two independent lamp bases, raised, rectangular, black plastic, screw terminals, without bezel. Part No
Series 03. mm x 4. mm IP40/IP65 0 A 400 VAC Choose one component from each of the coloured sections to assemble a complete switch. For other options or further information please contact your local sales
Limit Switches E47 Precision Switches
1 PG.0C.0.T.E July 0 E47 Precision The Cost-Effective Solution for Highly Accurate Switching Applications Contents Overview...................... 1 Model Selection, Basic Switches................ 2 Model
Distinctive Characteristics
Distinctive Characteristics Full face or spot illumination with incandescent lamps or multi-element LEDs, with or without resistors. Short Body Pushbuttons Series YB Choice of super bright LEDs in white,
TABLE OF CONTENTS. Push Button and Rocker Switches Pag. 4. Signal Lights and Lenses Pag. 14. Pressure Switches Pag. 24
1 TABLE OF CONTENTS Push Button and Rocker Switches Pag. 4 Signal Lights and Lenses Pag. 14 Pressure Switches Pag. 24 2 Push button and Rocker Switches 3 Switches Push button SERIES L4 L4 Bowl L4 Rubber
Technical Explanation for Basic Switches
CSM_MicroSwitch_TG_E_3_2 Introduction What Is a Basic Switch? A Basic Switch is a small switch with a very small contact gap and snap-action mechanism and with a contact structure that switches for a specified
When ordering, please state type and code number. Suitable sensor length. Max. Cap. range. tube adjust- see also Accessories. sensor. temp.
Thermostats Description KPS thermostats are temperature-controlled switches. The position of the contacts depends on the temperature of the sensor and the set value. In this series, special attention has
Customized switching solutions High current solutions
Powertrain Systems Chassis Systems Safety Security Body Driver Information Convenience Features - Switches currents of more than 300 A - Heat, moisture and vibration resistant - Minimal contact resistance
Pilot devices. General construction
Modular range Pilot Devices Pilot devices General construction Snap-on features reduce installation time Bezels: black plastic or chrome metal Contact block holder features rear mounting with quick-release
M3 Series Product. Class 0 - protection against electric shock relies upon basic insulation
Product Changeover circuit with rating 16A ong life snap action contacts mechanism Self-cleaning contact action Variety of actuators Screw, front screw or quick connect (faston) terminals dimensions according
7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
Small Limit Switch D4V
Small Limit Switch DV Compact Vertical Models Sized for Asian Standards Compact new design approximately / the size of OMRON vertical Limit Switches. Structure enables the terminal section to be fully
7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
Panel-mounted Thermostats
Data Sheet 602031 Page 1/10 Panel-mounted Thermostats JUMO heattherm, type 602030 and 602031 Special features Stable switching point position due to ambient temperature compensation (standard) Operating
ANT. Materials. Features. Miniature Toggle
Specificationscations RoHS Compliant ANT Electrical Ratings Electrical Life Contact Resistance 5A @ 0VAC, 8VDC A @ 50VAC See Contact Options 50,000 cycles typical
Microswitches MK series
D Microswitches MK series Introduction Microswitches of MK series have been developed in order to add new features to traditional and tested microswitches of Pizzato Elettrica (cross-reference at page
onlinecomponents.com
eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available Typical Applications
Multiple Lever Types. Proximity Limit Switch. Circuitry. The Proximity Limit Switch utilises magnetic switching to sense and trigger off ferrous
Proximity Limit Switch The Proximity Limit Switch utilises magnetic switching to sense and trigger off ferrous metals. All components are sealed and protected within the rugged brass housing eliminating
9000 SERIES SUBMINIATURE MOMENTARY PUSHBUTTON SWITCHES Overview
A 9000 SERIES Overview 9 SERIES Number of poles 3 Single pole Electrical functions 2 Normally closed (NC) 3 Normally open (NO) Terminals, case and bushing Case height 8 (.314) 2 Straight terminals - threaded
Microswitches MK series
Microswitches MK series Microswitches of MK series have been developed in order to add new features to traditional and tested microswitches of Pizzato Elettrica. These products have been designed with
Snap-action Microswitches Subminiature V4N
Snap-action Microswitches Subminiature V4N V4N Characteristics Peg mounting option Solder terminals 2.8 mm faston (quick connect) terminals PC terminals Sealed (IP 67) / unsealed (IP 40) Pre-wired option
DP_T Limit Switches. Double Insulation Plastic Casing IP65-50 mm. width. T1 - Plain plunger T10: nylon plunger T11: metal plunger 0,5 15 /
DP: two cable inlets for M16 x Cable Gland DP5: two cable inlets for M2 x Cable Gland Plastic Casing IP65-5 mm. width T1 - Plain plunger T1: nylon plunger T11: metal plunger T1 - Roller plunger T12: metal
Die changing technique
Die changing Die changing 8 Contents Product group 8 Roller bar, hydraulically lifted for heavy loads (400 bar), lifting of the complete roller bar for medium loads (120 bar), lifting of individual rollers
PERFORMANCE IP67 (IEC60529, JIS C 0920) Silver contact: Max.50 mω (6 to 8 Vdc, energizing current 1A, measured by voltage drop method) Gold alloy cros
Waterproof Vertical Type Limit Switches Model VCL-mm 2 sets of SPDT built-in switches enable use as a 2-point detection switch or multi-circuit control switch. On the 2-point detection (center-neutral)