series Micro-signal switches

Transcription

1 Product features Redundant contact system for high switching reliability by double contacting Self-cleaning contact system due to wiping contacting Center-zero version (basic type 1075) for detecting 3 switching positions Noiseless switching system Large overtravel Mechanical life endurance Contact resistance (new condition) Insulation resistance (new condition) 200E3 < 500 mohm (1 A 12 V DC) > 100 MOhm (500 V DC) Protection type IP 00 terminal side basic types 1065 and 1075 IP 67 actuator side all basic types, terminal side basic type 1068 Ambient temperature -40 C C Flammability Material actuator additional actuator housing terminals Contact material Shock resistance Miscellaneous UL 94 HB On request Other fastening pins Other lever forms Customized cable assembly Diagnosis capable versions POM / silicone rubber stainless steel spring steel PBTP tinned AuCo 50 g terminal side sealed electrical life endurance at 14 V DC 10 ma 200E3, at 30V DC 100 ma 40E3 227 ]

2 Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches 25 V DC 100 ma 30 V DC 40E3 Terminal type Terminal description Operating force (N) Changeover switch (SPDT momentary) can be diagnosed ± Normally open contact (SPNO) Changeover switch (SPDT momentary) Switching point NCC (mm) Minimum OFF range (mm) Switching point NOC (mm) Rest position (FP) max. (mm) Permissible end position (TP) (mm) Actuator description Lever drawing Miscellaneous with resistor circuit pin right 2.5 long ± pin right 5 long ± ± pin both sides 5 long ± ± pin both sides 2.5 long ± ± without pin ± ± pin both sides 2.5 long ± ± pin both sides 2.5 long ± ± L02 pin both sides 5 long ± ± L21 pin both sides 2.5 long ± ± L31 pin right 5 long ± ± L21 without pin ± ± pin both sides 5 long ± ± pin right 2.5 long Changeover switch with OFF position in the center (SPDT momentary - Center OFF) ± ± pin both sides 2.5 long ± ± without pin ± ± pin right 2.5 long ± ± pin left 2.5 long Stock version \ 228

3 3.6 ± ±0.2 ø1.9 Basic type 1065 Basic type ±0.2 5 ø1.8 Solder terminal 5 ø1.5 and right angled TH: Ø1.3 9 ±0.05 ø ø Cable, tinned wire ends ø ø ø ± ± FP OP NC OP NO TP 5.6 ± ± ± ±0.2 TP OP NO 3.23 ±0.2 ø ø left angled OP NC FP ø 3.5 TH: Ø1.3 9 ±0.05 ø ]

4 Rocker Switches Sensors Micro-signal switches Snap-Action switches Tact and key switches Foot switches Rotary Switches Slide Switches Toggle Switches Pushbutton Switches Basic type 1060/1070 Basic type 1075 Auxiliary actuators 13 R2 ø ø L01: straight lever R1 TP 6.85 OP NO 8 ±0.3 OF OP NC 9.45 ±0.3 FP ø 3.23 TP 7.35 TP 9 OP NO ±0.65 OP NC ±0.65 L21: simulated roller lever FP 14.7 ø Switch diagnostics capability Integrated resistors feature a circuit monitoring (short circuit, cable break, bad plug contatcs) Due to the OFF range between the normally closed contact and the normally open contact increased in relation to basic type 1065 the switch can be used for determining three switching positions. As a result two conventional switches can be replaced by one of these new switch versions in many applications. L02: straight lever TP 7.35 OP 7.35 L31: differential levers \ 230

5 Fastening disc for the basic types 1065, 1068 and 1075 Additional parts The fastening disc offers a fast, reliable fastening possibility in combination with switches with 5 mm long pins on plates or plastic parts with a wall thickness of up to 2.5 mm. 231 ]