TURQUOISE SWITCHES ABJ TYPE

Transcription

1 HIGH ENVIRONMENTAL RESISTANCE ABJ1,2,3,4,5 TURQUOISE SWITCHES ABJ TYPE Dust protected type Iersion protected type (wire leads bottom type) (Mounting hole 2.3 type) (Mounting hole 2.3 type) FEATURES Ultra-miniature size ( ) Sealed construction for use in adverse environment-sealed construction by epoxy resin and rubber cap greatly reduces possible miscontact due to contaminants such as dust. Conforming to IP7* of IEC protective construction classification Elastomer double molding technology, an industry first and ultrasonic swaging technology contribute to uniform sealing in high production quantities UL/CSA approved (Except the long stroke type of ABJ2 and the side wire leads type.) Long stroke type is available Since the repeatability is excellent and the play distance (overtravel) from the operating is ample, the task of performing adjustments during installation is easy. accuracy ±0.4 Overtravel= Min. 2.0 As wide range of high pressure is achieved, a stable reliability is ensured side wire leads type added. We now offer two types. M3 type installation hole Fixed pin type Iersion protected (wire leads side type) ac/e/service/environment Long stroke type TYPICAL APPLICATIONS Industrial use video jack Automotive (ex. Device for opening and shutting of automobile doors) * Based on the protective construction classification of IEC, items which satisfy the test requirements are denoted with an IP designation. ORDERING INFORMATION (If Agency standard required, please refer to the with Agency standard type. See next page.) Ex. ABJ Type of switch ABJ: Turquoise switch J type Size of mounting hole 1: 1.2 2: 2.3 3: 3 4: Fixed pin (right side pin) type Fixed pin (left side pin) type Terminal 4: Solder terminal 5: PC board terminal : Wire leads (bottom type) 7: Wire leads (right side type) 8: Wire leads (left side type) Contact arrangement 1: SPDT 2: (Wire leads type only) 3: SPST-NO (Wire leads type only) 0: 2: 4: : 8: (Mounting hole 3 lead wire type only) L: Long stroke type Remarks: 1. Standard packing: Dust protected type 100 pcs./carton, 2,000 pcs./case; Iersion protected type 50 pcs./case. 2. Not every combination is available. Please refer to the following table, PRODUCT TYPES. by pin plunger (max.) 4: 1.23 N : 1.9 N 7: 2.45 N (Long stroke type only) Contact 0: 1: + Au clad 25

2 With Agency standard type Ex. ABJ Type of switch ABJ: Turquoise switch J type Size of mounting hole 1: 1.2 2: 2.3 3: 3 Terminal 4: Solder terminal 5: PC board terminal : Wire leads (bottom type) Contact arrangement 1: SPDT 2: (Wire leads type only) 3: SPST-NO (Wire leads type only) 0: 2: 4: : 8: (Mounting hole 3 lead wire type only) by pin plunger (max.) 4: 1.23 N : 1.9 N Remarks: 1. Standard packing: Dust protected type 100 pcs./carton, 2,000 pcs./case; Iersion protected type 50 pcs./case. 2. Not every combination is available. Please refer to the following table, PRODUCT TYPES. Contact 0: 1: + Au clad Agency standard 9: UL/CSA 10 3 rated CONTACT ARRANGEMENT 1. SPDT 2. ( only) 3. SPST-NO ( only) COM NO NC COM NC COM NO APPLICABLE CURRENT RANGE (reference) 2A 1A OF1.23N OF1.9N 100mA Au clad 1mA 0 DC 5V AC 5V 15V 15V Note) OF: Value of pin plunger 30V 125V 2

3 PRODUCT TYPES 1. Dust protected type (Terminal type) Mounting hole 1.2 type / Mounting hole 2.3 type ABJ1,2,3,4,5 Mounting hole 1.2 type Mounting hole 2.3 type Solder terminal PC board terminal Solder terminal 1.23 N ABJ ABJ ABJ N ABJ ABJ ABJ N ABJ ABJ ABJ N ABJ ABJ ABJ N ABJ ABJ ABJ N ABJ ABJ ABJ N ABJ ABJ ABJ N ABJ14109 ABJ15109 ABJ Au clad Mounting hole 1.2 type Mounting hole 2.3 type Solder terminal PC board terminal Solder terminal 1.23 N ABJ ABJ ABJ N ABJ ABJ ABJ N ABJ ABJ ABJ N ABJ ABJ ABJ N ABJ ABJ ABJ N ABJ ABJ ABJ N ABJ ABJ ABJ N ABJ14119 ABJ15119 ABJ (1). Iersion protected type (Bottom wire leads type) Mounting hole 1.2 type Mounting hole 1.2 type 1.23 N ABJ ABJ ABJ N ABJ11009 ABJ12009 ABJ N ABJ ABJ ABJ N ABJ11209 ABJ12209 ABJ N ABJ ABJ ABJ N ABJ11409 ABJ12409 ABJ N ABJ11409 ABJ12409 ABJ N ABJ1109 ABJ1209 ABJ1309 Mounting hole 2.3 type + Au clad Mounting hole 1.2 type 1.23 N ABJ ABJ ABJ N ABJ11019 ABJ12019 ABJ N ABJ ABJ ABJ N ABJ11219 ABJ12219 ABJ N ABJ ABJ ABJ N ABJ11419 ABJ12419 ABJ N ABJ11419 ABJ12419 ABJ N ABJ1119 ABJ1219 ABJ

4 Mounting hole 2.3 type + Au clad Mounting hole 2.3 type 1.23 N ABJ ABJ ABJ N ABJ21009 ABJ22009 ABJ N ABJ ABJ ABJ N ABJ21209 ABJ22209 ABJ N ABJ ABJ ABJ N ABJ21409 ABJ22409 ABJ N ABJ21409 ABJ22409 ABJ N ABJ2109 ABJ2209 ABJ2309 Mounting hole 2.3 type 1.23 N ABJ ABJ ABJ N ABJ21019 ABJ22019 ABJ N ABJ ABJ ABJ N ABJ21219 ABJ22219 ABJ N ABJ ABJ ABJ N ABJ21419 ABJ22419 ABJ N ABJ21419 ABJ22419 ABJ N ABJ2119 ABJ2219 ABJ2319 Mounting hole 3 type ( type) Mounting hole 3 type 0.98 N ABJ ABJ ABJ N ABJ31809 ABJ32809 ABJ Au clad Mounting hole 3 type 0.98 N ABJ ABJ ABJ N ABJ31819 ABJ32819 ABJ (2). Iersion protected type (Side wire leads type) Fixed pin (right side pin) type SPST-NO 1.27 N Right ABJ ABJ N Left ABJ N Right ABJ47280 ABJ N Left ABJ Au clad SPST-NO 1.27 N Right ABJ ABJ N Left ABJ N Right ABJ47281 ABJ N Left ABJ

5 Fixed pin (left side pin) type + Au clad Mounting hole 3 type + Au clad 3. Iersion protected type (Bottom wire leads type) Long stroke type Mounting hole 2.3 type + Au clad SPECIFICATIONS 1. Contact rating ABJ1,2,3,4,5 SPST-NO 1.27 N Right ABJ ABJ N Left ABJ N Right ABJ57280 ABJ N Left ABJ58280 SPST-NO 1.27 N Right ABJ ABJ N Left ABJ N Right ABJ57281 ABJ N Left ABJ N ABJ Left 1.7 N ABJ N ABJ Left 1.7 N ABJ38281 Mounting hole 2.3 type (Horizontal) 2.45 N *ABJ21L70 ABJ22L70 ABJ23L70 Mounting hole 2.3 type (Horizontal) 2.45 N *ABJ21L71 ABJ22L71 ABJ23L71 contact Long stroke type contact Type Standard rating Low-level circuit rating + Au clad contact Long stroke type + Au clad contact 1.7 N, 1.9 N 1.23 N, 1.27 N 2.45 N 1.23 N, 1.27 N 1.7 N, 1.9 N 2.45 N 2 A 125 V AC 2 A 30 V DC 1 A 125 V AC 1 A 30 V DC 1 A 125 V AC 1 A 30 V DC 0.1 A 125 V AC 0.1 A 125 V AC 0.1 A 30 V DC 5 ma V DC 2 ma 12 V DC 1 ma 24 V DC 5 ma V DC 2 ma 12 V DC 1 ma 24 V DC 29

6 2. Characteristics Mechanical life (O.T.: Specified value) Electrical life at rated load (O.T.: max.) Insulation resistance, Long stroke type Wire leads (right & left side type) Other types contact type + Au clad contact type Dielectric strength Between non-continuous terminals Between each terminal and other exposed metal parts Between each terminal and ground Vibration resistance ( type) Shock resistance ( type) Contact resistance (Initial) Allowable operating speed (at no load) operating cycle rate (at no load) Ambient temperature Unit weight Silver contact type Gold clad contact type Min (at 0 cpm) Min (at 0 cpm) Min. 10 (at 0 cpm) Min (at 20 cpm) Min (at 20 cpm) Min. 100 MΩ (at 500 V DC insulation resistance meter) 00 Vrms 1,500 Vrms 1,500 Vrms 10 to 55 Hz at single amplitude of 0.75 (Contact opening max. 1 msec.) Min. 294 m/s 2 {30 G} (Contact opening max. 1 msec.) Dust protected type (IP50): 50 mω Iersion protected type (IP7): 100 mω (By voltage drop 1 A to 8 V DC) Dust protected type (IP50): 100 mω Iersion protected type (IP7): 150 mω (By voltage drop 0.1 A to 8 V DC) 1 to 500 /sec. Other type: 120 cpm Long stroke type: 0 cpm 40 C to +85 C Approx. g (IP50 type) 3. characteristics Type of actuator, Release force, Min 1.23N 0.15N 1.9N 0.25N 0.39N 0.029N 0.4N 0.049N 0.39N 0.029N 0.4N 0.049N 0.39N 0.029N 0.4N 0.049N Pretravel, Movement differential, Overtravel, Min N 0.20N N 0.22N N 0.2N N 0.29N , Mounting hole: ±0.2 Mounting hole: ±0.2 Mounting hole: 1.2.8±1.0 Mounting hole: ±1.0 Mounting hole: ±1.0 Mounting hole: ±1.0 Mounting hole: ±1.0 Mounting hole: ±1.0 Mounting hole: ±2.0 Fixed pin type Mounting hole: ±0.7 Fixed pin type Mounting hole: ±0.7 Mounting hole: ±2.0 Long stroke type 2.45N 0.20N ±0.4 Note: The O.P. differs between the 1.2 and 2.3 dia. installation hole types. 30

7 DIMENSIONS General tolerance: ± Dust protected type 1-(1) PC board terminal Mounting hole 1.2 type 1.2±0.05 dia. 5.4±0.3 Pretravel dia 5.0±0.15 Position 5.5± ± ± ± ± dia ± ± ± ± C ±0.12 t= ±0.12 Pretravel, Overtravel, Min mounting hole, stand-off, 5.5±0.2 7± ±0.4 R13.3 Pretravel ±0.05 dia. 4.2 Position.8± ± ± ±0.1 Pretravel, 3.0 Overtravel, Min. mounting hole, stand-off,.8± ±1.2 R ±0.4 Pretravel ±0.05 dia. R ± ±0.1 Position 9.8± ±1.2 Pretravel, 3.0 Overtravel, Min. mounting hole, stand-off, 9.8± ± ±0.4 Pretravel ±0.05 dia. R dia. Position 13.1± ± ± ±0.1 Pretravel, 3.0 Overtravel, Min. mounting hole, stand-off, 13.1± ±1.0 31

8 1-(2) Solder terminal General tolerance: ±0.25 Mounting hole: 1.2 Mounting hole: ±0.3 Pretravel dia 4.±0.3 Pretravel 0.Max 1.5 dia 5± Position 5.5± ± Position 7± ± dia ± ± ± ± C ± ± ± ± dia. 0.4 Remarks: Dimensions of the actuator type are the same as corresponding PC board terminal types. 2. Iersion protected type 2-(1) Bottom wire leads type Mounting hole: 1.2 Mounting hole: ± ±10 5±2 Thickness of the lead wire: UL/CSA approved type: AWG22 Color of the lead wire: COM...Black N.C....Red N.O....White COM N.O. N.C. 300±10 5±2 Thickness of the lead wire: UL/CSA approved type: AWG22 Color of the lead wire: COM...Black N.C....Red N.O....White 13.9±0.4 Remarks: 1. As for M1.2 type, other dimensions are the same as those of corresponding PC board terminal types. As for M2.3 type, other dimensions are the same as those of corresponding solder terminal types. 2. Dimensions of the actuator type are the same as corresponding PC board terminal types. 32

9 General tolerance: ±0.25 Mounting hole: 3 13± ±0.3 8.±1 2.5 Pretravel max. R Free Position (19.0) Position (1±2) Totaltravel Position (11.5 min.) dia. 4.4 R ±10 Pretravel,.0 5±2 1.0 Overtravel, Min ± ±2.0 2-(2) Side wire leads type Fixed pin type Right side pin type Right wire leads type 9.53 ± C ±0.05 dia Free (F.P.) max. (O.P.) 10.7 ±0.7 Totaltravel (T.T.P.) (8.55) R ± ±0.3 Pretravel, Overtravel, Min ±10 5 ±2 33

10 Right side pin type General tolerance: ±0.25 Left wire leads type 9.53 ± C ±0.05 dia Free (F.P.) max. (O.P.) 10.7 ±0.7 Totaltravel (T.T.P.) (8.55) R ± ±0.3 Pretravel, Overtravel, Min ±2 300 ± Left side pin type Right wire leads type 9.53 C ±0.05 dia ± Free (F.P.) max. (O.P.) 10.7 ±0.7 Totaltravel (T.T.P.) (8.55) R ±1.0.9 ±0.3 Pretravel, Overtravel, Min ±10 5 ±2 Left side pin type Left wire leads type 9.53 C ±0.05 dia ± Free (F.P.) max. (O.P.) 10.7 ±0.7 Totaltravel (T.T.P.) (8.55) R ±1.0.9 ±0.3 Pretravel, Overtravel, Min ±2 300 ±

11 Mounting hole 3 type General tolerance: ± C0.30 R ± ± dia. Free (F.P.) 18. max. (O.P.) 1.25 ±0.7 Totaltravel (T.T.P.) (14.1) Pretravel, 2. Overtravel, Min ± ± ± ± Iersion protected type (Bottom wire leads type) Long stroke type Mounting hole: 2.3 Free (F.P.) 3.2 max. (O.P.) 2.5 ± dia dia ± C ± ± dia. 300 ±10 5 ±2 COM NO NC 13.9 ±0.4 Overtravel, Min ±0.4 35