G3PE-Single-phase. Solid State Relays for Heaters
|
|
- Clyde Carson
- 6 years ago
- Views:
Transcription
1 Solid State Relays for Heaters Single-phase CSM_Single-phase_DS_E Compact, Slim-profile SSRs with Heat Sinks. s with No Zero Cross for a Wide Range of Applications. RoHS compliant. s also available with no zero cross Surge pass protection improved surge dielectric strength for output currents. (OMRON testing) Compact with a slim profile. Mount to DIN Track or with screws. Conforms to UL, CSA, and EN standards (TÜV certification). For the most recent information on models that have been certified for safety standards, refer to your OMRON website. Refer to Safety Precautions for All G3PE s. Ordering Information List of s Number of phases Insulation method Operation indicator Rated input voltage Zero cross function Applicable load * A, to VAC B DC- Yes A, to VAC B DC- 3 A, to VAC 3B DC- A, to VAC B DC- A, to VAC BL DC- No A, to VAC BL DC- 3 A, to VAC 3BL DC- Single-phase Phototriac A, to VAC BL DC- Yes (yellow) to VDC coupler A, to VAC B DC- Yes A, to VAC B DC- 3 A, to VAC 3B DC- A, to VAC B DC- A, to VAC BL DC- No A, to VAC BL DC- 3 A, to VAC 3BL DC- A, to VAC BL DC- * The applicable load current depends on the ambient temperature. For details, refer to Load Current vs. Ambient Temperature in Engineering Data on page 3.
2 Single-phase Specifications Certification UL, CS. No., and EN9--3 Ratings Input (at an Ambient Temperature of C) Output Item Rated voltage Operating voltage range to VDC 9. to 3 VDC Rated input current ma ma Voltage level Must operate voltage Must release voltage 9. VDC. VDC Item * The applicable load current depends on the ambient temperature. For details, refer to Load Current vs. Ambient Temperature in Engineering Data on page 3. Characteristics B(L) B(L) 3B(L) B(L) B(L) B(L) 3B(L) B(L) Rated load voltage to VAC (/ Hz) to VAC (/ Hz) Load voltage range to VAC (/ Hz) to VAC (/ Hz) Applicable load current * Inrush current resistance Permissible I t (reference value) Applicable load (resistive load). to A (at C) A ( Hz, cycle). to A (at C) A ( Hz, cycle). to 3 A (at C) A ( Hz, cycle). to A (at C). to A (at C) A ( Hz, cycle). to A (at C) A ( Hz, cycle). to 3 A (at C) A ( Hz, cycle). to A (at C) A s A s,a s A s,3a s,a s 3 kw (at VAC) kw (at VAC) kw (at VAC) 9 kw (at VAC) kw (at VAC) kw (at VAC) kw (at VAC) kw (at VAC) G3PE G3PE G3PE G3PE G3PE G3PE G3PE Item -B -B -3B -B -BL -BL -3BL Operate time / of load power source cycle + ms ms Release time / of load power source cycle + ms Output ON voltage drop. V (RMS) Leakage current ma (at VAC) Insulation resistance MΩ min. (at VDC) Dielectric strength, VAC, / Hz for min Vibration resistance to to Hz,.3-mm single amplitude (.-mm double amplitude) (Mounted to DIN track) Shock resistance Destruction: 9 m/s (Mounted to DIN track) Ambient storage temperature 3 to C (with no icing or condensation) Ambient operating temperature 3 to C (with no icing or condensation) Ambient operating humidity % to % Weight g g g g G3PE -BL Item G3PE -B G3PE -B G3PE -3B G3PE -B G3PE -BL G3PE -BL G3PE -3BL Operate time / of load power source cycle + ms ms Release time / of load power source cycle + ms Output ON voltage drop. V (RMS) Leakage current ma (at VAC) Insulation resistance MΩ min. (at VDC) Dielectric strength, VAC, / Hz for min Vibration resistance to to Hz,.3-mm single amplitude (.-mm double amplitude) (Mounted to DIN track) Shock resistance Destruction: 9 m/s (Mounted to DIN track) Ambient storage temperature 3 to C (with no icing or condensation) Ambient operating temperature 3 to C (with no icing or condensation) Ambient operating humidity % to % Weight g g g g G3PE -BL
3 Engineering Data Single-phase Input Voltage vs. Input Impedance and Input Voltage vs. Input Current Input impedance (kω) Input current (ma) Ta = C 9 Input current 3 Input impedance 3 3 Input voltage Input impedance (kω) Input current (ma) Ta = C 3 Input current 9 Input impedance Input voltage (V) Input impedance (kω) Input current (ma) Ta = C 9 Input current 3 Input impedance 3 3 Input voltage (V) Input impedance (kω) Input current (ma) Input impedance Input current Ta = C 3 3 Input voltage (V) Load Current vs. Ambient Temperature B(L), B(L) 3B(L), B(L) B(L), B(L) 3B(L), B(L) 3 B(L) B(L) B(L) B(L) 3 3 3B(L) B(L) B(L) 3B(L) 3 3 Inrush Current Resistance: Non-repetitive Keep the inrush current to below the inrush current resistance value (i.e., below the broken line) if it occurs repetitively. B(L), B(L) B(L), B(L) 3B(L), B(L) 3B(L), B(L) Inrush current (A. Peak) Inrush current (A. Peak) Inrush current (A. Peak) 3 3 3, 3,, Energized time (ms) 3 3, 3,, Energized time (ms) 3 3, 3,, Energized time (ms) 3
4 Single-phase Close Mounting (3 or SSRs) B(L) B(L) 3B(L) B(L) 3. 3 Relays Relays Relays Relays B(L) B(L) 3B(L) B(L) 3. 3 Relays Relays 3 3 Relays Relays Relays Relays 3 Relays Relays Relays Relays Relays Relays Close Mounting Example DIN Track
5 Dimensions Single-phase Note: All units are in millimeters unless otherwise indicated. Solid State Relays B(L) B(L) B(L) B(L) Two, M 3 ±. Two,. dia. 9 ±...3 Two, M3. 3 ± ±.3 () () (9) Output side circuit Trigger circuit Input Input side Output side circuit Trigger circuit Input Input side Three,. dia. or M 3B(L) B(L) 3B(L) B(L) Two, M ±.. dia. Two, M3. 9 ± elliptical 9 ±.3 () () (9) Output side circuit Trigger circuit Input Input side Output side circuit Trigger circuit Input Input side Three,. dia. or M
6 Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron s sole obligation hereunder shall be, at Omron s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer s application or use of the Product. At Buyer s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer s application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user s programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron s Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron s representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. OMRON Corporation Industrial Automation Company In the interest of product improvement, specifications are subject to change without notice. (c)copyright OMRON Corporation All Right Reserved.
7 Solid State Contactors for Heaters Three-phase CSM_Three-phase_DS_E Compact, Slim-profile SSRs with Heat Sinks. Solid State Contactors for Three-phase Heaters Reduced Installation Work with DIN Track Mounting. RoHS compliant. Surge pass protection improved surge dielectric strength for output currents. (OMRON testing) Slim design with 3-phase output and built-in heat sinks. DIN Track mounting types and screw mounting types are available. All DIN Track mounting types mount to DIN Track (applicable DIN Track: TR3-Fe (IEC )). Conforms to UL, CSA, and EN standards (TÜV certification). For the most recent information on models that have been certified for safety standards, refer to your OMRON website. Refer to Safety Precautions for All G3PE s. Ordering Information List of s s with Built-in Heat Sinks Number of phases Three-phase Insulation method Phototriac coupler Operation indicator Rated input voltage Zero cross function Yes (yellow) to VDC Yes Type Applicable load * Number of poles 3 B-3N DC- A, to VAC B-N DC- 3 B-3N DC- A, to VAC B-N DC- 3 3B-3N DC- 3 A, to VAC 3B-N DC- 3 B-3N DC- DIN track mounting * Screw mounting A, to VAC A, to VAC A, to VAC 3 A, to VAC A, to VAC A, to VAC A, to VAC 3 A, to VAC A, to VAC A, to VAC B-N DC- 3 B-3N DC- B-N DC- 3 B-3N DC- B-N DC- 3 3B-3N DC- 3B-N DC- 3 B-3N DC- B-N DC- 3 B-3 DC- B- DC- *3 3 B-3 DC- B- DC- 3 3B-3 DC- 3B- DC- 3 B-3 DC- B- DC- 3 B-3 DC- B- DC- *3 3 B-3 DC- A, to VAC B- DC- 3 3B-3 DC- 3 A, to VAC 3B- DC- 3 B-3 DC- A, to VAC B- DC- *. The applicable load current depends on the ambient temperature. For details, refer to Load Current vs. Ambient Temperature in Engineering Data on page. *. The applicable DIN Track is the TR3-Fe (IEC ). For details, refer to the mounting information in the Safety Precautions for All G3PE s. *3. DIN Track or Screw mounting.
8 Three-phase s with Externally Attached Heat Sinks Number of phases Three-phase Insulation method Phototriac coupler Operation indicator Rated input voltage 3 B- DC- A, to VAC B- DC- * The rated load current depends on the heat sink or radiator that is mounted. It also depends on the ambient temperature. For details, refer to Load Current vs. Ambient Temperature. Accessories (Order Separately) Heat Sink Heat resistance Rth (s-a) ( C/W) Zero cross function Yes (yellow) to VDC Yes. Y9B-P. Y9B-P.3 Y9B-P.3 Y9B-P.3 Y9B-P Type Applicable load * Externally attached heat sinks A, to VAC A, to VAC 3 A, to VAC A, to VAC A, to VAC A, to VAC 3 A, to VAC Number of poles 3 B- DC- B- DC- 3 B- DC- B- DC- 3 3B- DC- 3B- DC- 3 B- DC- B- DC- 3 B- DC- B- DC- 3 B- DC- B- DC- 3 3B- DC- 3B- DC-
9 Three-phase Specifications Certification UL, CS. No., and EN9--3 Ratings (at an Ambient Temperature of C) Operating Circuit (All s) Item Rated operating voltage Operating voltage range Rated input current (impedance) Must-operate voltage Must-release voltage Insulation method Operation indicator Same for all models to VDC 9. to 3 VDC ma ( VDC) 9. VDC VDC min. Phototriac Yellow LED Main Circuit of s with Built-in Heat Sinks Item B- B- B- B- 3B- 3B- *. The applicable load current depends on the ambient temperature. For details, refer to Load Current vs. Ambient Temperature in Engineering Data on page. *. Applicable Load Use the following formula to calculate the maximum total capacity of a heater load for a three-phase balanced load with delta connections. Maximum load capacity = Load current Load voltage 3 Example: A V 3 =,9 W. kw Example: A V 3 =,39 W.3 kw Main Circuit of s with Externally Attached Heat Sinks Permissible I t (reference value) A s A s,a s A s,a s Applicable load (resistive load: AC Refer to Engineering Data on page. class) * The rated load current depends on the heat sink or radiator that is mounted. It also depends on the ambient temperature. For details, refer to Load Current vs. Ambient Temperature in Engineering Data on page. B- Rated load voltage to VAC to VAC Operating voltage range to VAC to VAC Rated load current * A (at C) A (at C) 3 A (at C) A (at C) A (at C) A (at C) 3 A (at C) A (at C) Minimum load current. A. A Inrush current resistance (peak value) Permissible I t (reference value) Applicable load (resistive load: AC class) * Item A ( Hz, cycle) A ( Hz, cycle) A ( Hz, cycle) B- B- B- B- A ( Hz, cycle) B- 3B- 3B- B- A ( Hz, cycle) A s A s,a s A s,a s. kw (at VAC) B- B-. kw (at VAC) B- H B-. kw (at VAC) 3B- 3B-. kw (at VAC) B- B-. kw (at VAC) B- B-. kw (at VAC) B- B- 9. kw (at VAC) 3B- 3B- B- 3. kw (at VAC) Rated load voltage to VAC to VAC Operating voltage range to VAC to VAC Rated load current * A (at C) A (at C) 3 A (at C) A (at C) A (at C) A (at C) 3 A (at C) A (at C) Minimum load current. A. A Inrush current resistance (peak value) A ( Hz, cycle) A ( Hz, cycle) A ( Hz, cycle) A ( Hz, cycle) B- A ( Hz, cycle) B- 3
10 Three-phase Characteristics s with Built-in Heat Sinks Item Operate time Release time Output ON voltage drop Leakage current * Insulation resistance Dielectric strength Vibration resistance Shock resistance Ambient storage temperature Ambient operating temperature Ambient operating humidity Weight B- B- B- B- / of load power source cycle + ms / of load power source cycle + ms 3B- 3B- B- B- B- B-. V (RMS). V (RMS) B- ma (at VAC) ma (at VAC) MΩ min. (at VDC), VAC, / Hz for min DIN Track mounting: to to Hz,.-mm single amplitude (.3-mm double amplitude) Screw mounting: to to Hz,.3-mm single amplitude (.-mm double amplitude) 9 m/s (reverse mounting: 9 m/s) 3 to C (with no icing or condensation) 3 to C (with no icing or condensation) % to %. kg. kg. kg. kg. kg. kg. kg. kg. kg * The leakage current of phase S will be approximately 3 times larger if the -element model is used. B-. kg 3B-. kg 3B-. kg B-. kg B-. kg s with Externally Attached Heat Sinks Item B- B- B- B- 3B- 3B- B- B- B- B- B- B- 3B- 3B- B- B- Operate time / of load power source cycle + ms Release time / of load power source cycle + ms Output ON voltage drop. V (RMS). V (RMS) Leakage current * ma (at VAC) ma (at VAC) Insulation resistance MΩ min. (at VDC) Dielectric strength, VAC, / Hz for min Vibration resistance to to Hz,.3-mm single amplitude (.-mm double amplitude) Shock resistance Destruction: 9 m/s Ambient storage temperature 3 to C (with no icing or condensation) Ambient operating temperature 3 to C (with no icing or condensation) Ambient operating humidity % to % Weight 3 g * The leakage current of phase S will be approximately 3 times larger if the -element model is used. Heat Sinks Y9B-P Y9B-P Y9B-P Y9B-P Y9B-P Weight g g g g, g
11 Engineering Data Three-phase Input Voltage vs. Input Impedance and Input Voltage vs. Input Current Input current (ma) Input impedance (kω) 9 3 Input current Input impedance 3 3 Input voltage (V) Input current (ma) Input impedance (kω) Ta = C 3 9 Input current Input impedance Input voltage (V) Load Current vs. Ambient Temperature s with Built-in Heat Sinks B-, B- 3B-, B- B-, B- 3B-, B- B-, B- 3B-, B- B-, B- 3B-, B- 3 B- B- B- B- B- B- B- B B- 3B- 3B- 3B- B- B- B- B- 3 * * The dotted lines in the charts are the UL derating curves for the 3B-, B-, 3B-, B-, 3B-, B-, 3B-, B-. s with Externally Attached Heat Sinks B-(-) 3B-(-) B-(-) B-(-) B-(-) 3B-(-) B-(-) B-(-) B-(-) B-(-) 3B-(-) B-(-) 3B-(-) B-(-) B-(-) B-(-) 3 3
12 Three-phase Inrush Current Resistance: Non-repetitive Keep the inrush current to below the inrush current resistance value (i.e., below the broken line) if it occurs repetitively. B-(H) B-(H) Inrush current (A. Peak) B-(H), B-(H) B-(H), B-(H) B-(H), B-(H), Inrush current (A. Peak) 3B-(H), 3B-(H) 3B-(H), 3B-(H) B-(H), B-(H) B-(H), B-(H) Inrush current (A. Peak) 3 3 3, 3,, 3 3, 3,, 3 3, 3,, Energized time (ms) Heat Sink Area vs. Load Current ( C and C) B- B- Heat sink area (cm ), 3,,, 3,, 3 Ambient temperature + C Ambient temperature + C Aluminum plate t = 3. Heat sink area (cm ), 3,,, 3,, 3 Ambient temperature + C Energized time (ms) Ambient temperature + C Aluminum plate t = 3. Energized time (ms) Note: The heat sink area is the combined area of all surfaces of the heat sink that radiate heat. For the B-, when a current of A flows through the SSR at C, the graph shows that a heat sink area of about, cm would be required. Therefore, if the heat sink is square, one side of an aluminum plate in the heat sink must be 3 cm or longer (, (cm )/ = 3 cm (rounded to a whole number)). 3 3 s with Externally Attached Heat Sinks Heat Resistance Rth (Junction/SSR Back Surface) Rth ( C/W) B-. B-. 3B-. B-. Heat Resistance of Heat Sinks Rth ( C/W) Y9B-P. Y9B-P. Y9B-P.3 Y9B-P.3 Y9B-P.3 Note: If a commercially available heat sink is used, use one that has a heat resistance equal to or lower than a standard OMRON Heat Sink.
13 Dimensions Three-phase Note: All units are in millimeters unless otherwise indicated. Solid State Relays s with DIN Track Mounting B-3N B-N B-N B-3N B-N B-N Two, R.3 mounting holes. Two,.-dia. mounting holes Four, dia. Two, M3. 3. Six, M. 9 ± ±.3 Four,. dia. or M s with DIN Track Mounting B-3N 3B-N B-3N 3B-N Two, R.3 mounting holes Two,.-dia. mounting holes Four, dia. Two, M3... Six, M (3-A type) Six, M (-A type) 3. ± ±.3 Four,. dia. or M B-3N 3B-N B-3N 3B-N
14 Three-phase s with DIN Track Mounting 3B-3N B-N 3B-3N B-N Two,.-dia. mounting holes Four, dia. Two, M3.. 3 Two, R.3 mounting holes. 3. ±.3 Six, M ±.3 Four,. dia. or M 3B-3N B-N 3B-3N B-N s with DIN Track Mounting B-3N B-3N Two,.-dia. mounting holes Four, dia. Two, M3. Two, R.3 mounting holes ±.3 Six, M ±.3 Four,. dia. or M G3PEB-3N B-3N
15 Three-phase s with Screw Mounting B- B-. dia.. 9 DIN Track or screw mounting. 3. Six, M Two,. dia. or M Two, M3... elliptical hole ±.3 ±.3 B- B- s with Screw Mounting B-3 Four, R. B- B-3 B-... Two, M3. 3. Six, M 9. Four,. dia. or M For screw mounting only ±.3 ±.3 B-3 B- B-3 B- 9
16 Three-phase s with Screw Mounting B-3 3B- B-3 3B- Four, R.. 9. Two, M Six, M (@3B-) Six, M (@B-3) 9. Four,. dia. or M For screw mounting only ±.3 ±.3 B-3 3B- B-3 3B- s with Screw Mounting 3B-3 B- 3B-3 B- Four, R Two, M3. Six, M 3. For screw mounting only Four,. dia. or M ±.3 ±.3 3B-3 B- 3B-3 B-
17 Three-phase s with Screw Mounting B-3 Four, R. B Two, M3. Six, M For screw mounting only Four,. dia. or M ±.3 B-3 B-3 ±.3 s with Externally Attached Heat Sinks B- Four,. dia. Four, dia. B- B- B- 3B- 3B- B- B- B-. 3. B- B- B- 3B- Four,. dia. or M 3B- B- B- Two, M3. ±.3 Six, M (@B-@H/-@B-@H) Six, M (@3B-@H/-@B-@H) dia..
18 Three-phase Accessories (Order Separately) Heat Sink Y9B-P (Mounts to DIN Track.) For B- and B-. dia. Two,. dia. or M Heat Sink Y9B-P For B-, B-, B-, and B- Four, M Four,. dia. or M. 9.. elliptical hole ±.3 9±.3 Four, R... ±.3 ±.3 Heat Sink Y9B-P For B-, 3B-, B-, and 3B- Heat Sink Y9B-P For 3B-, B-, 3B-, and B- Heat Sink Y9B-P For B- and B- Four, M Four, M M-D Four, M Four, R.. Four, R. 3. M-D Four, R. 3. Four,. dia. or M Four,. dia. or M Four,. dia. or M 9±.3 9±.3 ±.3 ±.3 ±.3 ±.3
19 Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Remedy. Omron s sole obligation hereunder shall be, at Omron s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environments. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Suitability of Use. Omron Companies shall not be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer s application or use of the Product. At Buyer s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine, system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer s application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user s programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron s Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron s representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. OMRON Corporation Industrial Automation Company In the interest of product improvement, specifications are subject to change without notice. (c)copyright OMRON Corporation All Right Reserved.
Model Number Structure
Solid State Relays CSM OEE_DS_E_1_2 Extremely Thin Relays Integrated with Heat Sinks Downsizing achieved through optimum design of heat sink. Mounting possible via screws or via DIN track. Close mounting
More informationOperation Key D4BS - K Head Mounting Direction F: Four mounting directions possible (front-side mounting at shipping)
Safety-door Switch D4BS The Special Activates a Direct Opening Mechanism to Open the Contacts and Shut Off Control Circuits when Protective Doors Are Opened on Machine Tools or Other Equipment CSM_D4BS_DS_E_6_1
More informationA165E CSM_A165E_DS_E_11_2
Emergency Stop Switch (16-dia.) CSM DS_E_11_2 Separate Construction with Minimal Depth Direct opening mechanism to open contacts in emergencies, such as when they are welded. Conforms to EN 6947-5-5. Includes
More informationOrdering Information. Specifications. Motor Time Switch H2F-WM. Accessories (Order Separately) Time Specifications. Ratings
Motor Time Switch H2F-WM CSM_H2F-WM_DS_E_2_1 Weekly ON/OFF Control in 1-h Increments The H2F-WM is a Compact Weekly Time Switch in a DIN -mm Body Equipped with Power Interruption Backup Providing Protection
More informationS8JX-N/S8JX-G Series Replacement Brackets
Original model mounting method Bottom mounting Front mounting Side mounting Original model: S8JX-N/S8JX-G Replacement model: S8FS-G Replacement bracket Model scheduled to be discontinued Recommended replacement
More informationD4BS CSM_D4BS_DS_E_8_4
Safety-door Switch CSM DS_E_8_4 The Special Activates a Direct Opening Mechanism to Open the Contacts and Shut Off Control Circuits when Protective Doors Are Opened on Machine Tools or Other Equipment
More informationD4GS-N CSM_D4GS-N_DS_E_7_2
Slim Safety Door Switch D4GS-N CSM_D4GS-N_DS_E_7_2 Slim Safety Door Switches with IP67 Rating Slim design with a width of only 17 mm (three-contact models). Reversible design allowing either front or rear
More informationXW2R-COM. Common Terminals X W 2R - P D - COM. Space-saving and less wiring work of power supply wiring are achieved. Application Example
Common Terminals XW2R-COM CSM_XW2R-P_M_B-COM_DS_E Space-saving and less wiring work of power supply wiring are achieved. Common wiring is already wired on the PCB, transition wiring is unnecessary. Wiring
More informationDIN Track Terminal Blocks with Screw Terminals XW5T
New Product DIN Track Terminal Blocks with Screw Terminals XW5T Global-standard DIN Terminal Blocks for Control Panels Wires held with screws. Compatible with a wide range of wire sizes from 0.14 to 185
More informationSolid State Relays for Heaters
Solid State Relays for Heaters Single-phase Compact, Slim-profile SSRs with Heat Sinks. s with No Zero Cross for a Wide Range of Applications. RoHS compliant. s also available with no zero cross Surge
More information2NC (slow-action) Direct. Model. opening
Small Safety Limit Switch D4F CSM_D4F_DS_E_5_2 Smallest Class of Safety Limit Switches in the World Note: Contact your sales representative for details on models with safety standard certification. The
More informationDIN Track Terminal Blocks with Screw Terminals
New Product DIN Track Terminal Blocks with Screw Terminals XW5T Global-standard DIN Terminal Blocks for Control Panels Wires held with screws. Compatible with a wide range of wire sizes with a nominal
More informationDIN Track Terminal Blocks with Screw Terminals XW5T
New Product DIN Track Terminal Blocks with Screw Terminals XW5T Global-standard DIN Terminal Blocks for Control Panels Wires held with screws. Compatible with a wide range of wire sizes with a nominal
More informationRatings 1 A at 125 VAC 1 A at 30 VDC LED indicator Without indicator With indicator Without indicator With indicator Actuator
Miniature Limit Switch CSM DS_E_3_3 Many Models Including Roller Lever Switches are Only -mm Thick with Connector New center roller lever models that enable ganged mounting of up to 6 Switches. Cable connectors
More informationBetter Productivity by Standstill and Low-speed Monitoring
Better Productivity by Standstill and Low-speed Monitoring Standstill Monitoring Reduces Extra Waiting Time During Work Problem When a hazardous part has a long inertia, door-lock control using an off-delay
More informationDimension A. Dimension B
Slim Connector-Terminal lock Conversion Units CSM DS_E_2_2 New Slim Connector-Terminal lock Conversion Units. Mounting area reduced by 35% (in comparison with 40-pole XW2 Units) to contribute to downsizing
More informationD4BL. Guard Lock Safety-door Switch
Guard Lock Safety-door Switch D4BL CSM_D4BL_DS_E_7_1 Release Protective Cover Locks Using Controller Signals or Pushbutton Switches after the Cutting Tool Stops Moving Due to Inertia A mechanical lock
More informationA22LK CSM_A22LK_DS_E_6_2
Guard Lock Safety Key CSM DS_E_6_2 The guard lock prevents accidental mode changes. for secure equipment activation during maintenance The guard lock of the Operation Unit prevents incorrect operation.
More information2 to 25 A, 100 to 240 VAC G3PF-225B-STB Compact slotted
Solid State Relays with Built-in Current Transformer CSM DS_E_7_ A New-concept SSR with Built-in Current Transformer. Heater Burnout and SSR Shortcircuit Failure Detection. Built-in Current Transformer
More informationDigital display Pressure range ON/OFF output Linear output Model
Slim Digital Pressure Sensor E8CC with Built-in Microcomputer and Digital Display Withstands a pressure of 49 kpa and highly reliable. Incorporates a two-turn pressure adjuster ensuring easy pressure setting.
More informationApplicable output load (See note 2.) Photocoupler Yes Yes 40 A at 110 to 220 VAC 5 to 24 VDC G3NB-240B 5 to 24 VDC G3NB-240B-UTU 5 to 24 VDC
Solid State Relays G3NB with 40-A output at a reasonable price. Switches 9 A without a heat sink. Zero cross function enables less noise operation. Built-in varistor effectively absorbs external surges.
More informationE2E2. Proximity Sensor with a Long Screw Length. Long-barrel Inductive Proximity Sensor. Ordering Information. Sensors DC 2-Wire Models
Long-barrel Inductive Proximity Sensor EE CSM_EE_DS_E Proximity Sensor with a Long Screw Length Increased tightening strength. Cable protectors provided as a standard feature. Increased indicator visibility.
More informationD4BL. Guard Lock Safety-door Switch. Die-cast aluminum body Key holding force of 700 N. Model Number Structure. Model Number Legend Switch D4BL - K
Guard Lock Safety-door Switch D4BL CSM_D4BL_DS_E_10_1 Die-cast aluminum body Key holding force of 700 N Auxiliary release key ensures easy maintenance and unlocks the door in the case of a power failure.
More informationModel Number Structure
Solid State Relays (Single-phase) G3PB New Single-phase Solid State Relays with Compact Size for Heater Control Slim models with a thickness of only 22.5 mm are also available. Compact design achieved
More informationSolid State Relays G3NA. Model Number Structure. Model Number Legend
Solid State Relays G3NA The reliable choice for Hockey-puck-style Solid State Relays. Available in a Wide Range of Currents. All models feature the same compact dimensions to provide a uniform mounting
More informationG3NA. Model Number Structure. Solid State Relays. Model Number Legend
Solid State Relays CSM DS_E_12_1 Wide Lineup of General-purpose Solid State Relays with Applicable Loads of 5 to 9 A AC Output Relays with 75-A and 9-A output currents have been added to the Series. All
More information(3) Terminals. 00: AC connector. Comparison of New and Old Molded Terminal Models. Model Location of lead outlet
Small Sealed Switch D4E-N CSM_D4E-_N_DS_E_6_ Slim and Compact Switch with Better Seal and Ensuring Longer Service Life than D4E Flat springs with an improved lever ratio of the built-in switch ensure smooth
More information2NC (slow-action) Direct. Model. opening
Small Safety Limit Switch CSM DS_E_3_1 Smallest Class of Safety Limit Switches in the World Note: Contact your sales representative for details on models with safety standard certification. The world's
More informationD4NH CSM_D4NH_DS_E_7_1
Safety-door Hinge Switch D4NH CSM_D4NH_DS_E_7_1 Compact, Plastic-body Safety-door Hinge Switch Designed for Saving Space in Machines and Other Equipment Lineup includes three contact models with 2NC/1NO
More informationCSM_D4N-_R_DS_E_6_1
Pull-reset Safety Limit Switch D4N-@R CSM_D4N-_R_DS_E_6_1 A Series of Pull-reset s Now Available Note: Contact your sales representative for details on models with safety standard certification. Lineup
More informationA22E. Emergency Stop Switch (22-dia./25-dia.) Install in 22-dia. or 25-dia. Panel Cutout. Model Number Structure L M 24A 01
Emergency Stop Switch (-dia./5-dia.) CSM DS_E_5_ Install in -dia. or 5-dia. Cutout Direct opening mechanism to open the circuit when the contact welds. Safety lock mechanism prevents operating errors.
More informationInput terminals Isolation method Zero cross function Operation indicator Alarm output Applicable load (See note.) Model
Solid State Relays with Built-in Current Transformer CSM DS_E_7_ A New-concept SSR with Built-in Current Transformer. Heater Burnout and SSR Shortcircuit Failure Detection. Built-in Current Transformer
More informationA165S/W. Separate Construction with Cylindrical 16-dia. Body. Knob-type Selector Switch (Detachable) (Cylindrical 16-dia.
Knob-type Selector Switch (Detachable) (Cylindrical 16-dia.) CSM_A165S_W_DS_E_4_1 Separate Construction with Cylindrical 16-dia. Body Same separate construction as the A16-series Pushbuttons with Miniature
More informationM2S. Indicator Series with Square 40-mm Body. Indicator (Square) List of Models
Indicator (Square) CSM DS_E_3_2 Indicator Series with Square 40-mm Body Same type of Indicator as those in the A3S-series Pushbutton Switch Easy panel mounting from the front and simple lamp replacement
More informationRedundancy Unit. Model Number Structure. Ordering Information. Model Number Legend. New Product. S8VK-R Series name
New Product Redundancy Unit S8VK-R Contribute to build high reliable systems Compact and Cost-effective solution for Back-up applications Easy setup for system reliability requirement Redundancy operating
More informationFeatures. Emergency Stop Switch A165E. Separate Construction with Smallest Class of Depth in the World. Safety Lock Prevents Misuse
Emergency Stop Switch Separate Construction with Smallest Class of Depth in the World Direct opening mechanism to open contacts in emergencies, such as when they are welded. Conforms to EN418. Includes
More informationMultiple Limit Switch
Multiple Limit Switch CSM DS_E_1_1 A New Monoblock Multiple Limit Switch Incorporating a ead Box with a Tough ead and Ensuring igh Sealing Performance and a Mechanical Durability of 5,000,000 Operations
More information(with Class-1 AC resistive load) 3. G3PB-215B-2N-VD kW max. (25 A) G3PB-225B-3N-VD 2. G3PB-225B-2N-VD kw max. (35 A) G3PB-235B-3N-VD 2
Solid-state Contactor (New Heat Sink Construction) G3PB Space and working time saved with new heat sink construction. Series now includes 480-VAC models to allow use in a greater range of applications.
More informationModel Number Structure
Solid State Relays CSM DS_E_9_1 Wide Lineup of General-purpose Solid State Relays with Applicable s of 5 to 9 A AC Output Relays with 75-A and 9-A output currents have been added to the Series. All models
More informationModel Number Structure
Solid State Relays Extremely Thin Relays Integrated with Heat Sinks Downsizing achieved through optimum design of heat sink. Mounting possible via screws or via DIN track. Close mounting possible for linking
More informationModel Number Structure
Solid State Relays CSM DS_E_2_2 Extremely Thin Relays Integrated with Heat Sinks Downsizing achieved through optimum design of heat sink. Mounting possible via screws or via DIN track. Close mounting possible
More information0.5 s to 30 h (30 s, 3 min, 30 min, 3 h, 30 h)
Mechatronic Analog Timer H3AM Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Refer to Warranty and
More informationSolid State Relays for Heaters
Solid State Relays for Heaters Single-phase SSR for low heat generation enables carrying 5 A * even for close mounting of three SSRs to contribute to downsizing of control panels. Models available with
More informationHigh-power Solid State Relays G3PH
New Product News High-power Solid State Relays G3PH High-power, Load-control s with High Current of 75 or 150 A and High Voltage of 240 or 480 VAC RoHS compliant. Models also available with no zero cross.
More informationA4EG CSM_A4EG_DS_E_6_1
Enabling Grip Switch CSM DS_E_6_1 Enabling Grip Switch with Distinct Feel for Three Easily Discernible Positions In addition to the standard models, the lineup also includes models with an emergency stop
More informationG3PE-Single-phase. Solid State Relays for Heaters
Solid State Relays for Heaters Single-phase Compact, Slim-profile SSRs with Heat Sinks. Models with No Zero Cross for a Wide Range of Applications. RoHS compliant. Models also available with no zero cross
More informationD4NS. Safety-door Switch. Multi-contact, Labor-saving, Environment-friendly, Next-generation Safety-door Switch. Model Number Structure
Safety-door Switch D4NS CSM_D4NS_DS_E_5_2 Multi-contact, Labor-saving, Environment-friendly, Next-generation Safety-door Switch Lineup includes three contact models with 2NC/1NO and 3NC contact forms and
More informationInsulation method Zero-cross function Indicators Applicable output load Model number Phototriac coupler Yes Yes (See page 6) Main Circuit
SSR with Failure Detection Function Detects failures in SSRs used for heater temperature control and simultaneously outputs alarm signals. This product supports the safe design of heater control systems,
More informationA3S. Pushbutton Switch Series with Square 40-mm Body. Lighted Pushbutton Switch (Square) List of Models
Lighted Pushbutton Switch (Square) CSM DS_E_7_ Pushbutton Switch Series with Square 40-mm Body Combines miniature design with distinct but soft sense of operation. Easy panel mounting from the front and
More informationModel Number Legend (Completely Assembled)... Shipped as a set which includes the Operation Unit, Lamp (lighted models only), and Switch. 4.
Emergency Stop Switch (-dia./5-dia.) AE CSM_AE_DS_E_7_ Install in -dia. or 5-dia. Panel Cutout Direct opening mechanism to open the circuit when the contact welds. Safety lock mechanism prevents operating
More informationD4NS/D4NS-SK. Safety-door Switch. Multi-contact, Labor-saving, Environment-friendly, Nextgeneration. Model Number Structure. Model Number Legend
Safety-door Switch D4NS/D4NS-SK D4NS_D4NS-SK E Multi-contact, Labor-saving, Environment-friendly, Nextgeneration Safety-door Switch Lineup includes three contact models with 2NC/1NO and 3NC contact forms
More informationSafety Limit Switch
Safety Limit Switch D4B-@N CSM_D4B-_N_DS_E_4_1 Snap-action contact with certified direct operation certification. Maintenance, seal, and resistance to shock increased and direct mechanism added. Three-conduit
More informationPushbutton Switches 30-mm Pushbutton Switches Universal Design. Emphasis on Color Coding, Workability, and Safety.
New Product Pushbutton Switches A30NZ-M@@-@@A 30-mm Pushbutton Switches Universal Design. Emphasis on Color Coding, Workability, and Safety. Easy to Use You can connect up to three Contact Blocks in one
More information(3) Terminals. 00: AC connector. Comparison of New and Old Molded Terminal Models. Model Location of lead outlet
Small Sealed Switch D4E-N CSM_D4E-_N_DS_E_4_ Slim and Compact Switch with Better Seal and Ensuring Longer Service Life than D4E Flat springs with an improved lever ratio of the built-in switch ensure smooth
More informationTina 11A Connection block
Original instructions Tina 11A Connection block ABB Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety Read and understand this document Please read and understand this
More informationHigh-power Solid State Relays G3PH
New Product News High-power Solid State Relays G3PH High-power, Load-control s with High Current of 75 or 150 A and High Voltage of 240 or 480 VAC RoHS compliant. Models also available with no zero cross.
More informationSmall-diameter Proximity Sensor
Small-diameter Proximity Sensor EE Ultra small size, but surprisingly easy installation! With the addition of M, 5.-dia.,.5-dia. size, unshielded, pre-wired connector model, and connector model, a total
More information20 amps 220 amps, 60 Hz VDC VAC G3PA-420B-VD-2 DC amps 440 amps, 60 Hz G3PA-450B-VD-2 DC12-24
Solid State Relays (SSRs) G3PA/G3PB Long Service Life for Circuits that Cycle Frequently D D D D D Built-in heat sink increases life and reliability Voltage turn-on at zero crossing reduces initial inrush
More informationTina 4A Connection block
Original instructions Tina 4A Connection block Instructions valid for versions of the product from ver. H ABB Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety Read
More informationSmile 11 RA/-B Smile 12 RF/-G Reset button
Original Instructions Smile 11 RA/-B Smile 12 RF/-G Reset button ABB Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety Read and understand this User Manual Please read
More informationE bracket (see note 1) SPST-NO G7L-1A-TJ-CB G7L-1A-BJ-CB DPST-NO G7L-2A-T-CB G7L-2A-B-CB
General Purpose Relay G7L Ideally suited for high-inrush fluid pump controls: pool/spa, water processing, emergency, chemical industry, etc. High-capacity, high-withstand voltage relay with no contact
More informationD4BL. Guard Lock Safety-door Switch
Guard Lock Safety-door Switch D4BL CSM_D4BL_DS_E_5_1 Release Protective Cover Locks Using Controller Signals or Pushbutton Switches after the Cutting Tool Stops Moving Due to Inertia A mechanical lock
More informationSafety Guard Switching Unit G9SX-GS
Enabling Grip Switch CSM DS_E_5_1 Enabling Grip Switch with Distinct Feel for Three Easily Discernible Positions The difficult task of configuring safety circuits is now easily achieved by combining the
More informationD4NH. Safety-door Hinge Switch. Compact, Plastic-body Safety-door Hinge Switch Designed for Saving Space in Machines and Other Equipment
Safety-door Hinge Switch CSM DS_E_4_1 Compact, Plastic-body Safety-door Hinge Switch Designed for Saving Space in Machines and Other Equipment Note: Contact your sales representative for details on models
More informationFMC-1/2 Tina Muting unit
Original instructions FMC-1/2 Tina Muting unit ABB Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety Read and understand this document Please read and understand this
More informationSmile 41 Push-button box with/without emergency stop
Original instructions Smile 41 Push-button box with/without emergency stop ABB Jokab Safety Varlabergsvägen 11, 434 39 Kungsbacka www.abb.com/jokabsafety Read and understand this document Please read and
More informationOrdering Information. Solid State Relay G3NA. New Models with 75-A and 90-A Output Join the Previous Models with 5- to 50-A Output.
Solid State Relay G3NA New Models with 75-A and 9-A Output Join the Previous Models with 5- to 5-A Output. AC Output Relays with 75-A and 9-A output added. All models feature a uniform mounting pitch.
More informationTina 10A/B/C Adaptor unit
Original instructions Tina 10A/B/C Adaptor unit ABB Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety Read and understand this document Please read and understand this
More informationSense7-series Non-contact coded safety switch
Original instructions Sense7-series Non-contact coded safety switch ABB AB / Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety Read and understand this document Please
More informationPower ratings Input voltage Output Voltage Output current Boost Current Model number 120 W 2-phase and 3-phase
New Product Switch Mode Power Supply S8VK-T (120/240/480/960 W Models) Worldwide 3-phase Power Supply Resistant in tough environments Easy and fast installation The most compact class on the market Wide
More informationMiniature Limit Switches
(Horizontal) Plastic od 49.17.1* oller Lever 49.1.01.03 Miniature Limit witches 49 ealed oller Plunger 49 eries Miniature Limit witches Model election...1 Model Number tructure... Technical Data...3 pecification...4
More informationApplicable Terminal Relay Rated voltage Model G6D-F4B 12 VDC G6D-1A (see note) 24 VDC 12 VDC G6D-1A-AP (see note) 24 VDC G3DZ-F4B 12 VDC G3DZ-2R6PL
Terminal Relay Easy-to-use, Space-saving Terminal Relay with Four-point Output Almost the same size as PYF Socket: 31 x 35 x 68 mm (W x H x D) Each terminal circuit (with coil or contact) is independent
More informationEStrong-series Emergency Stop
Original instructions EStrong-series Emergency Stop ABB AB / Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety Read and understand this document Please read and understand
More informationPRODUCT SPECIFICATION 28&29. Solid State Relays. Series.
PRODUCT SPECIFICATION Solid State Relays 28&29 Series www.wernerelektrik.com Technical Data...1 Model Number Selection Panel Mounting Type... 2 PCB Mountable... 3 Solid State Relay... 7 Model Number Structure
More informationModel Number Structure. Power Controllers G3PX. Single-phase Models. Model Number Legend
Power Controllers GPX Refer to Safety Precautions (page 0). Single-phase Models EUN Series AC Power Controllers with Phase-control System Allow Precise Temperature Control Models with Base-up and Soft-start
More informationSolid State Relays for Heaters G3PJ
Solid State Relays for Heaters Single-phase SSR with low heat generation carrying up to 5A* provides close mounting (up to 3 SSRs) to allow for downsizing of a control panel. Models available with time-saving
More informationCylindrical photoelectric sensors in M18 plastic or brass housings. Performance and portfolio variety. Metal *1 90 Optics AC power supply *2
Cylindrical photoelectric sensors in M8 plastic or brass housings Complete sensor portfolio in plastic and metal housing IP67, IP69K for highest water resistance High immunity against electro-magnetic
More information1,000 M min. (at 500 VDC)
Round Water-resistant Connectors XS5 CSM_XS5_DS_E_0_ Round Water-resistive Smartclick Connectors That Reduce Installation Work A newly developed lock mechanism that is compatible with round M connectors.
More informationHigh-force: 230 g. Projected 7.3 mm General-purpose: 160 g. High-force: 230 g. Flat 4.3 mm General-purpose: 200 g.
Tactile Switch BW Tactile Switch with Sealed Construction for Automatic Soldering Sealed construction conforming to IP67 (IEC-6059) provides high reliability in locations exposed to dust or water. Available
More informationLED Signal Towers. Pre-assembled and pre-cabled in different aperture to highlight the processes. Features/Unique selling proposition
Pre-assembled and pre-cabled in different aperture to highlight the processes LED Signal Towers Modular and monolithic design are available. Patlite s extensive product range cover highly advanced LED
More informationLoad Resistive load (p.f. = 1) Inductive load (p.f. = 0.40, L/R = 7 ms) Rated load 5 A at 250 VAC, 30 VDC 2 A at 250 VAC, 30 VDC
Power PCB Relay G6D-ASI Reduced board space ideal for high-density mounting (45% smaller than the surface area of G6B). Slim package: measures 6.5 W x 17.5 L x 12.5 H mm Switches loads up to 5 A, 250 VAC/30
More informationModel Number Structure. Characteristics. Model Number Legend. Soft Starter. Applicable Motors. Accessories
Three-phase Hybrid Soft er (Soft, Kick, Current Limit, Soft Stop) CSM DS_E_6_1 Built-in Bypass Relay and Smooth s/stops Achieved in a Compact er Advanced functions include soft start, kick start, and soft
More informationSolid State Relays G3RV. Model Number Structure. Ordering Information. Model Number Legend. List of Models. SSR and Socket Combinations
Solid State Relays G3RV Slimmest OMRON plug-in SSR with maximum width 6.2 mm Long electrical life and high speed switching Large plug-in terminals for reliable connection G3RV-D (DC load) models can manage
More informationD4NL CSM_D4NL_DS_E_9_2
Guard Lock Safety-door Switch DNL CSM_DNL_DS_E_9_2 Best-selling Guard Lock Safety-door Switch Available in Several Compact, Multi-contact Models Selectable Operation Key insertion direction and adjustable
More informationSwitch Mode Power Supply S8VS
Switch Mode Power Supply S8VS Monitor Functions for Replacement Timing and Total Run Time in a Compact Size. 180-W Models added to the series. Compact size (40 (W) 95 (H) mm) (60-W Models) Large 3-digit,
More informationOrdering Information. Text PCB Power Relay G5RL. Low-profile Relay with Various Models. Power Relays
Low-profile Relay with Various Models Low profile:.7 mm in height Clearance and creepage distance Between coil and contacts: 8 mm/8 mm Between contacts of the same polarity: 3 mm/4 mm Models with AC coil
More informationGC-1. Roof and Gutter De-Icing Control Installation and Operating Instructions FOR EXTERIOR INSTALLATION ONLY
GC-1 Roof and Gutter De-Icing Control Installation and Operating Instructions FOR EXTERIOR INSTALLATION ONLY GENERAL INFORMATION The GC-1 heating cable controller has been designed and manufactured for
More informationPRODUCT SPECIFICATION. Stack Lights. Series.
PRODUCT SPECIFICATION Stack Lights Series www.wernerelektrik.com Light Color Significance... Specifications... Functional Specification... Model Number Structure - Stack Lights... Model Number Selection...
More informationSolid State Relays for Heaters G3PJ
Solid State Relays for Heaters G3PJ Single-phase SSR with low heat generation carrying up to 5A* provides close mounting (up to 3 SSRs) to allow for downsizing of a control panel. Models available with
More informationA22E. Model Number Structure. Emergency Stop Switch. Model Number Legend. Completely Assembled. Install in 22-dia. or 25-dia.
Switch Install in 22-dia. or 25-dia. Panel Cutout Direct opening mechanism to open the circuit when the contact fuses. Safety lock mechanism prevents operating errors. Easy mounting and removal of Switch
More informationPRODUCT SPECIFICATION. Foot Switches. Series.
PRODUCT SPECIFICATION Foot 46 Series www.wernerelektrik.com Foot Switch Structures...1 Technical Data...2 Model Number Structure - Foot...3 Dimensions...4 Precautions... Foot WERNERS are Rigorous and tough.
More informationPCB Relay. Contact form Terminals Coil terminals Rated voltage Model SPST-NO #250 tab terminals PCB terminals 5, 12, 24 VDC G4A-1A
PCB Relay Miniature Single-pole Relay with 80-A Surge Current and 20-A Switching Current Ideal for motor switching. Miniature, relay with high switching capacity built-in applications. Creepage distance
More informationType Contact form Enclosure ratings Model Standard SPST-NO (Class A) Flux protection G5LA-1A Sealed
PCB Relay G5LA A Cubic, Single-pole 1A Power Relay Economical cube relay with universal terminal footprint Conforms to VDE435, CQC UL recognized/ CSA certified. High switching power: 1A @ 5VAC Withstands
More informationPower Controller. (see note 1) 10 sec
Power Controller Single-phase Models EUN Series AC Power Controller with Phase-control System Allows Precise Temperature Control Models with Base-up and Soft-start Functions Available EH Series Phase Control
More informationSafety Relay Unit. Ordering Information. Ideal for Safety Door and Emergency Stop Switch Circuits for Machines in European Countries
Safety Relay Unit Ideal for Safety Door and Emergency Stop Switch Circuits for Machines in European Countries Two-pole slim models that are only 22.5 mm wide, three-pole models that are only 68 mm wide,
More informationMKey9-series Safety Interlock Switch with Guard Locking
Original instructions MKey9-series Safety Interlock Switch with Guard Locking ABB AB / Jokab Safety Varlabergsvägen 11, SE-434 39 Kungsbacka, Sweden www.abb.com/jokabsafety Read and understand this document
More informationG7S. Ordering Information. Plug-In Safety Relay. Safety Relay for Machine Control Conforms to EN Standard. H Suitable for safety circuits in press
Plug-In Safety Relay Safety Relay for Machine Control Conforms to EN Standard H Suitable for safety circuits in press machinery, machine tools, and other production machinery Do Not Remove H CE mark (conforms
More informationHighLuxV2-Zenigata Series
Features Light source: 3.6W Zenigata power LED Source life: More than 30,000 hours Low heat, no UV or IR light radiation Homogeneous and well defined illumination Highest Luminous Efficacy: 50 lm/watt
More informationOrdering Information. Motor Time Switch H2F-D. Accessories (Order Separately) ON/OFF Control 48 Times per Day in 15-min Increments
Motor Time Switch H2F-D ON/OFF Control 48 Times per Day in 15-min Increments The H2F-D is a Low-cost Time Switch for Affordable Operation in a Compact DIN 72 x 72-mm Body. Choose the Ideal Model to Match
More informationDigital display Pressure range ON/OFF output Linear output Model
Slim Digital Pressure Sensor E8CB/ CSM_E8CB DS_E 1 with Built-in Microcomputer and Digital Display Withstands a of 9 kpa and highly reliable. Incorporates a two-turn adjuster ensuring easy setting. Be
More information