Series OCQ Pneumatic Compact Cylinders
|
|
- Barry Scott
- 5 years ago
- Views:
Transcription
1 The Price Alternative Series OCQ Pneumatic Compact Cylinders Ten bore sizes available in incremental stroke lengths Standard shock pads reduce end of travel impact Standard magnets for switch sensing capability Drop-in metric mounting matching global standard (8) OCQ1
2 ORDERING DATA TYPE S = Singl Rod, Double Acting Bore in SIZE Area sq Area sq in MODE NO. S 5- x 2 OCQ 12 SWITCH BUNDE (OPTIONA) - SD K DESIGN NO. 5 = Metric STANDARD STROKE ENGTHS [] 5,1, 15, 2,, 3, 5,1, 15, 2,, 3, 5,1, 15, 2,, 3, 35, 4, 45, 5 5,1, 15, 2,, 3, 35, 4, 45, 5 5,1, 15, 2,, 3, 35, 4, 45, 5, 75, 1 5,1, 15, 2,, 3, 35, 4, 45, 5, 75, 1 1, 15, 2,, 3, 35, 4, 45, 5, 75, 1 1, 15, 2,, 3, 35, 4, 45, 5, 75, 1 1, 15, 2,, 3, 35, 4, 45, 5, 75, 1 1, 15, 2,, 3, 35, 4, 45, 5, 75, 1 Switch Circuitry D = DC Reed N = DC Solid State NPN - Sink P = DC Solid State PNP - Source 1) Switch bundle option includes 2 switches 2) Switch bundle available with actuator only 3) Switches available in quick connect only 4) Magnets standard for switch sensing CABE TYPE K = Quick Connect Cordsets Model Number Cable ength in [2 m] in [5 m] Includes one cordset. Switches Part Number Description 867- Reed DC 5-3 V, 5 ma, Quick Connect Sink Type (NPN), DC 5-3 V, 5 ma, Quick Connect Source Type (PNP), DC 5-3 V, 5 ma, Quick Connect Includes one switch. 2 Copyright 215, by PHD, Inc. All Rights Reserved. Printed in the U.S.A. (8) OCQ1
3 BENEFITS shock pads snap ring stainless steel size spring steel size 4-1 piston rod stainless steel size 12 - chrome-plated steel size 32-1 rod bushing hard anodize aluminum size anodized aluminum with PTFE/bronze bearing alloy size 4-1 integrated switch slots magnet on piston for externally mounted switches Standard shock pads reduce end of travel impact Ten bore sizes available in incremental stroke lengths Standard magnets for switch sensing capability Drop-in metric mounting matching global standard Proven Optimax performance at a competitive price Component Body Bore Plug Snap Ring Piston Rod Rod Bushing Rod Seal Shock Pads Piston Seal O-rings Piston Wear Ring* * 32 thru 1 only Materials Anodized Aluminum Alloy See Figure NBR PTFE OCQ1 (8)
4 ENGINEERING DATA Series OCQ Cylinder Specifications 12 & Operating Air Pressure.7-1 bar [1.2 to 145 psi].5-1 bar [7.3 to 145 psi] Operating Temperature 5 to 6 C [41 to 14 F] Velocity 5 to 5 /s [2 to 2 in/s ] 5 to 3 /s [2 to 13 in/s] 5 to 2 /s [2 to 8 in/s] Rated ife 3 million cycles ubrication Factory lubricated for rated life Rod Diameter Effective Area Unit Weight (g) by Stroke Direction 2 in 2 5 Extend Retract Extend Retract Extend Retract Extend Retract Extend Retract Extend Retract Extend Retract Extend Retract Extend Retract Extend Retract Weight (g) of Moving Components by Stroke Maximum ateral oad (kg) by Stroke See Figure 1 Figure 1 4 (8) OCQ1
5 ENGINEERING DATA MAXIMUM AOWABE KINETIC ENERGY.6 12 Bore.6 16 Bore Total Moving oad kg Total Moving oad kg Bore.6 Bore Total Moving oad kg Total Moving oad kg.6 32 Bore.6 4 Bore Total Moving oad kg Total Moving oad kg.6 5 Bore Bore Total Moving oad kg Total Moving oad kg.35 8 Bore. 1 Bore Total Moving oad kg Total Moving oad kg OCQ1 (8)
6 DIMENSIONS SIZES 12 THRU 32 SIZE 12 SIZE 16 H THREAD C DEEP Ø D ROD SIZE 2 & M E 4X WASHER FOR THRU MOUNTING Ø Y C K FATS Q 2X P F C C C C 8X THRU & C BORE FOR OB SHCS, M OA THREAD x RA DEEP (4X THIS & OPPOSITE SIDE) E Ø G Z Ø X 8X RB 8X RA B + STROKE 1) DIMENSIONS ARE MIIMETERS 2) DESIGNATED CENTERINE IS CENTERINE OF CYINDER 3) UNESS OTHERWISE DIMENSIONED, MOUNTING HOE PATTERNS ARE CENTERED ON DESIGNATED CENTERINE OF CYINDER H THREAD C DEEP Ø D ROD SIZE 32 Ø G 14 M E 4X WASHER FOR THRU MOUNTING K FATS Q 2X P F C Ø Y C 8X THRU & C BORE FOR OB SHCS, OA THREAD x RA DEEP (4X THIS & OPPOSITE SIDE) C M E JJ J Z Ø X 8X RB 8X RA B + STROKE Bore A B C Ø D E F Ø G H J JJ K M P OA OB Q RA RB Ø X Ø Y Z M3 x M5 x.8 M4 x.7 M M4 x M5 x.8 M4 x.7 M M5 x M5 x.8 M6 x 1 M M6 x M5 x.8 M6 x 1 M M8 x G 1/8 M6 x 1 M SIZES 4 THRU 1 8X THRU & C BORE FOR OB SHCS, OA THREAD x RA DEEP (4X THIS & OPPOSITE SIDE) H THREAD C DEEP Ø D ROD SIZE 4 C 8X THRU & C BORE FOR OB SHCS, OA THREAD x RA DEEP (4X THIS & OPPOSITE SIDE) T H THREAD C DEEP Ø D ROD Ø G SIZE 5 THRU 1 SQ M SQ E J C SQ M JJ SQ E JJ 1) DIMENSIONS ARE MIIMETERS 2) DESIGNATED CENTERINE IS CENTERINE OF CYINDER 3) UNESS OTHERWISE DIMENSIONED, MOUNTING HOE PATTERNS ARE CENTERED ON DESIGNATED CENTERINE OF CYINDER J 4X WASHER FOR THRU MOUNTING T Ø G Ø Y C Z Ø X K FATS Q 2X P 8X RB 8X RA B + STROKE F C Bore A B C Ø D E F Ø G H J JJ K M P OA OB Q RA RB T Ø X Ø Y Z M8 x G 1/8 M6 x 1 M M1 x G 1/4 M8 x 1. M M1 x G 1/4 M1 x 1.5 M M16 x G 3/8 M12 x 1.75 M M2 x G 3/8 M12 x 1.75 M (8) All dimensions are reference only unless specifically toleranced. All dimensions are. OCQ1
7 MOUNTING KITS FANGE MOUNTING KITS SIZE 12 THRU FV A1 + STROKE A2 + STROKE Kit Base Part Number Cylinder Bore 12 = = 16 2 = 2 = 32 = 32 4 = 4 5 = 5 63 = 6 8 = 8 1 = 1 FX FZ SIZE 32 THRU 1 M 2X Ø FD FV FT A1 + STROKE A2 + STROKE FT FANGE MOUNT DIMENSIONS A1 A2 FD FT FV FX FZ M FX FZ 4X Ø FD FT 1) KIT MAY BE ATTACHED TO EITHER END OF CYINDER. EACH KIT CONTAINS SINGE FANGE MOUNTING PATE AND NECESSARY FASTENERS FOR MOUNTING TO CYINDER. 2) CYINDER SHOWN FOR REFERENCE ONY. FT FOOT MOUNTING KITS SIZE 12 THRU Y H Kit Base Part Number Cylinder Bore 12 = = 16 2 = 2 = 32 = 32 4 = 4 5 = 5 63 = 6 8 = 8 1 = 1 FOOT MOUNT DIMENSIONS A S D G H T X Y Z X Y X Z SIZE 32 THRU 1 X Z 4X Ø D H Y G G 4X Ø D Y T X S + STROKE T Y X S + STROKE 1) EACH KIT CONTAINS BRACKET AND MOUNTING HARDWARE FOR ONE END ONY. 2) CYINDER SHOWN FOR REFERENCE ONY. All dimensions are reference only unless specifically toleranced. All dimensions are. OCQ1 (8)
8 MOUNTING KITS REAR FORK MOUNTING KITS SIZE 12 THRU CU Ø CD H1 THRU A PIN Kit Base Part Number Cylinder Bore 12 = = 16 2 = 2 = 32 = 32 4 = 4 5 = 5 63 = 6 8 = 8 1 = 1 CT C + STROKE SIZE 32 THRU 1 CW CU RR CX CZ A PIN Ø D d9 PIN REAR FORK DIMENSIONS A C Ø CD Ø D CT CU CW CX CZ RR CT C + STROKE CW Ø CD H1 THRU 1) EACH KIT CONTAINS: REAR FORK, FASTENERS FOR MOUNTING TO CYINDER, PIN, AND RETAINING RINGS 2) CYINDER SHOWN FOR REFERENCE ONY. RR CX CZ Ø D d9 PIN All dimensions are reference only unless specifically toleranced. All dimensions are. 8 (8) OCQ1 5M 11/15 993
Optimized for OEM requirements at a lower price.
The Price Alternative Optimized for OEM requirements at a lower price. Series OSH Compact Pneumatic Slide Table - 4 s, Incremental Travels Series ORQ Compact Rotary Table - 6 s Series OCV Pneumatic ISO
More informationSeries OCG Pneumatic Cylinders
New Models The Price Alternative Series OCG Pneumatic Cylinders www.phdinc.com (8) 624-811 and Rebuildable round body cylinders 6 bore sizes standard stroke lengths High speed/double acting OCG2 ORDERING
More informationSeries OCG Pneumatic Cylinders
The Price Alternative Series OCG Pneumatic Cylinders Repairable round body cylinders 6 bore sizes 1 standard stroke lengths High speed/double acting www.phdinc.com (8) 624-811 OCG1 ORDERING DATA DESIGN
More informationThe Price Alternative Pneumatic Cylinders and Slides
The Price Alternative Pneumatic Cylinders and Slides OCG Round Body Pneumatic ISO Air The Price Alternative OCQ Round Body Pneumatic ISO Air The Price Alternative OCV ISO Air The Price Alternative SERIES
More informationElectric Slide Solutions
Electric Slide Solutions Series ESCV Electric Thruster Slide Designed for vertical or non-rotating applications Built on the field proven Series SCV, the electric version offers many of the same benefits
More informationGlobal Series Air Cylinders
Global Series Air Cylinders Double Rod Options and Toolplates with interchange hole patterns for GT Series 2x øsp C bores opposite side for P SHCS KP EP KP 4x, GP threads (See pages 40-43) Global Series
More informationPNEUMATIC 180 ANGULAR GRIPPER
PNEUMATIC 180 ANGULAR GRIPPER Major Benefits Jaws rotate completely clear of work area eliminating an otherwise required axis of travel Three standard jaw rotations available: 60, 90, and 180 One piece
More informationSERIES PA SWING ARM CLAMPS for the Automotive Industry
Pa SERIES PA SWING ARM CLAMPS for the Automotive Industry Ideal for a wide variety of automated part holding and transfer applications Copper Arm Switches Installed ORDERING DATA: SERIES PA CLAMPS INDEX:
More informationGRB. long life Compact Angular gripper SHIPS IN 1-2 days. Major Benefits. Industry Uses
long life Compact Angular gripper SHIPS IN 1-2 days hardened steel jaws have robust design and include dowel holes for precise tooling location steel cover, jaw design, and tight jaw slots minimize external
More informationKRONES DIRECT REPLACEMENTS
PLASTIC PACKAGING COMPONENTS GRO Quality Support Delivery SOLUTIONS A BLOW division MOLDING SOLUTIONS of PHD PLASTIC PACKAGING COMPONENTS P KRONES DIRECT REPLACEMENTS phdinc.com (800) 624-8511 INCREASE
More informationCompact Cylinder: Standard Type Double Acting, Single Rod. How to Order 30 D F9BW. Body option <Standard stroke> Nil C M. Double acting.
Compact Cylinder: Type Series ø, ø, ø, ø How to Order Without auto switch D With auto switch CDQS D FW S Number of auto switches L F G D, uilt-in magnet Mounting style Through-hole/oth ends tapped common
More informationNorgren Compact. Interchangeable Pneumatic Actuator. Section 9. Single Acting Compact. Double Acting Compact Interchangeable Pneumatic Actuator
Section 9 orgren Compact Interchangeable neumatic Actuator Single Acting Actuator...ACT-9-1 Double Acting Actuator...ACT-9-8 Single Acting Compact Interchangeable neumatic Actuator Double Acting Compact
More informationSERIES SCV SLIDES DESIGN 2/6 INFORMATION SHEET
SERIES SC SLIDES DESIGN / INFORMATION SHEET IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with slide installation and setup. File with maintenance or machine documentation.
More informationANGULAR PNEUMATIC GRIPPERS 180 SERIES DIRECTCONNECT TM
ANGULAR PNEUMATIC GRIPPERS 1 SERIES DIRECTCONNECT TM with spring assist DCT-RE Series No Adaptor Plates Required Highly Configurable Modular Construction, Exclusive DIRECTCONNECT TM Technology Full Jaw
More informationSTRETCH ROD CYLINDERS for Krones Stretch Blow Molding Machines
PACKAGING COMPONENTS PLASTIC GROUP BCK STRETCH ROD CYLINDERS for Krones Stretch Blow Molding Machines Quality Delivery Support SOLUTIONS A division of PHD Simplified Pneumatic System Easy Maintenance Better
More informationSERIES SFP SLIDES INFORMATION SHEET. Ordering Data. U.S. Patent No. 6,857,780 International Patent No. CA PART NO.
Ordering Data SERIES SFP SLIDES INFORMATION SHEET IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with slide installation and setup. File with maintenance or machine documentation.
More informationParallel long travel pneumatic gripper
Parallel long travel pneumatic gripper Major Benefits Compact, low profile design with long jaw travel and large moment capacities Total jaw travels up to 125 mm (4.921 in) allows for larger parts, encapsulated
More informationHEAVY LIFTERS FOR MATERIAL HANDLING
HEAVY LIFTERS FOR MATERIAL HANDLING Ideal for automated, high load part liftg the automotive and assembly mache builder dustries Available as a drop- replacement M002 Mountg M001 Mountg Switches Stop Collars
More informationINFORMATION SHEET: SERIES SxL/SxH DESIGN 1 [5] SLIDES
INFORMATION SHEET: SERIES SxL/SxH DESIGN [] SLIDES IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with slide installation and setup. File with maintenance or machine documentation.
More informationGRA GRV SERIES GRA PARALLEL GRIPPERS SERIES GRV ANGULAR GRIPPERS. Compact Precision Grippers Ideal for a Wide Range of Applications
GRA GRV SERIES GRA PARALLEL GRIPPERS SERIES GRV ANGULAR GRIPPERS Compact Precision Grippers Ideal for a Wide Range of Applications Series GRA Parallel Series GRV Angular GRAV0 ORDERING DATA: SERIES GRA
More informationSeries MGPS. Compact Guide Cylinder: ø50, ø80 MGP S Z73. How to Order. Applicable auto switches. Compact Guide Cylinder.
Compact Guide Cylinder: Series S ø, Compact Guide Cylinder Compact guide cylinder Heavy duty guide rod type S Z73 mm mm How to Order Number of auto switches Nil S 2 pcs. 1 pc. Auto switch type Nil Without
More informationCompact Cylinder. Series CQS CUJ CU CQS CQ2 RQ CQM MU
Compact Cylinder Series ø, ø, ø, ø Ideal for machine designs with small space requirements The D-M auto switch will not protrude from switch mounting groove. Square body shape gives you flexibility for
More informationGRH SERIES GRH PARALLEL GRIPPERS. Long Jaw Travel, Low Profile Gripper with Large Moment Capacities
GRH SERIES GRH PARALLEL GRIPPERS Long Jaw Travel, Low Profile Gripper with Large Moment Capacities Wide Jaw Guide System for Minimal Tooling Deflection Million Cycle Life Flexible Mounting Optional Multi-Position
More informationpneumatic swing clamps
pneumatic swing clamps Sizing and Application Chart Series Standard Features Bore Clamping Clamping Force [lbf.]n 90 Series [0.86] 22 [0.] 13 [34] 0 Arm rotates at the top of stroke Shielded rod protects
More informationBrochure. Compact Cylinders. Setting a new standard for: Quality Reliability Value Global Compatibility
Brochure Compact Cylinders Setting a new standard for: Quality Reliability Value Global Compatibility Actuators - Compact Cylinders How to Order MODEL MACQ - Compact Cylinder MAGNET Blank - No Magnet S
More informationWe shut the air supply down to our clamps once they are in position. Sometimes we notice that they are sticking. Could this be the cause?
Frequently Asked Questions B-1 Following are some of the questions we have been asked while developing the VektorAir TM line. Please read them carefully before planning your system. Many common problems
More informationSeries RQ. The new standard for the future. Compact Cylinder with Air Cushion. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100
1 Compact Cylinder with ir Cushion ø, ø, ø, ø, ø, ø, ø, ø The new standard for the future J CQ U - NW ir Cushion Cylinder Uses a unique air cushion mechanism with no cushion ring. Size ø, ø and ø newly
More informationIdeal for robotic and end effector applications
MINIATURE CLAMPS FOR WORKHOLDING APPLICATIONS Ideal for robotic and end effector applications Bayonet Body Option -B11 ORDERING DATA: SERIES GRM CLAMP SIZE 1 INDEX: Ordering Data Page 2 Benefits Page 3
More informationPSP SERIES PSP SHOT PIN. Superior part locating and positioning. Provides the best repeatability in its class. Patent Pending PSP01A
PSP SERIES PSP SHOT PIN Superior part locating and positioning. Provides the best repeatability in its class. Port Fittings Option Switch Options Weld Cover Option Patent Pending ORDERING DATA: SERIES
More informationCompact Cylinder/Plate type
Compact Cylinder/Plate type Series :,,, Width: Reduced by up to % (compared with SMC series) Total length: Reduced by up to % Volume: Reduced by up to 1% Weight: Reduced by up to % (compared with SMC series
More informationPNEUMATIC SLIDES (SERIES ZA)
ZA PNEUMATIC SLIDES (SERIES ZA) Bore 2x6, 2x8, 2x12, 2x16 or 2x20 mm. Stroke from 10 mm to 150mm. Optional end of stroke adjustments using shock absorbers, rubber bumpers, (FGD) or grub screw, (FPD). Optional
More informationAngular Grippers- 180 Series
D/ SERIES Angular Grippers- Series. angular gripper: he full jaw opening ( ) means that the part can be direct fed, avoiding any release movement by the robot or by the actuator. Multiple mounting locations:
More informationParallel Grippers. Body One piece anodized aluminum body
Catalog 19-2/US Features Rack and Pinion Rack and pinion drive mechanism provides synchronous motion. Body One piece anodized aluminum body Bushings Four composite bushings provide the support needed for
More informationINTEGRATED HYDRAULIC BRAKE
INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE The integrated hydraulic brake is comprised of a pneumatic cylinder that acts as an actuator and an oleo-dynamic circuit that acts as a brake. The
More informationUnique CORROSION RESISTANT PLASTIC SLIDE UNIT FEATURES. Major Benefits. Industry Uses
Unique CORROSION RESISTANT PLASTIC SLIDE Model# ML305733 PLASTIC SLIDE PET GRIPPERS UNIT FEATURES Bore Size: Stroke: Body: Tool Plate: Guide Shafts: Retaining Rings: Fasteners: 2X 32 mm DIA 2.000 +.080/-.000
More informationPLK/PLKD SERIES PLK/PLKD PIN LOCATING CLAMPS
PLK/PLKD SERIES PLK/PLKD PIN LOCATING CLAMPS Ideal for part clamping in weld areas Disappearing Pin Weld Field Immune Switch PLK03 PLK/PLKD PIN LOCATING CLAMPS PATENT PENDING Major Benefits Completely
More informationIdeal for robotic and end effector applications
MINIATURE CLAMPS FOR WORKHOLDING APPLICATIONS Ideal for robotic and end effector applications Bayonet Body Option -B11 ORDERING DATA: SERIES GRM CLAMP SIZE 1 INDEX: Ordering Data Page 2 Benefits Page 3
More informationCompact Cylinder: Large Bore Size Type Double Acting, Double Rod. How to Order. Cushion C Rubber bumper. Action. D Double acting
Compact Cylinder: Large Bore Size Type Double Acting, Double Rod Series CQ2W ø, ø, ø, ø, ø Without auto switch With auto switch B Built-in magnet CQ2WB CDQ2WB Double rod ounting style Through-hole/Both
More informationPNEUMATIC ROTARY ACTUATORS
Bulletin FRA.C-09 Prices effective September 1, 2011 PNEUMATIC ROTARY ACTUATORS FRA & FRC Series FRA Series Features 1. Magnetic pistons are standard on all models. 2. Compact design saves space. 3. Rectangular
More informationAngular Motion Gripper Product Overview
2. 1 Angular Motion Gripper Product Overview RUA Series Angular Gripper 2-Jaw Angular Gripper Spring Assist Pneumatic or Hydraulic Operation Preferred Market: l Global Page2.2 DCT/CT Series TM 18 Angular
More information/ ø6, ø10, ø16, ø20 A table cylinder suitable for short pitch mounting
roduces a table cylinder non-rotating accuracy MXH / ø, ø, ø1, ø A table cylinder suitable for short pitch mounting Application example Auto switches offer numerous variations Reed switches, solid state
More informationSERIES BCS STRETCH ROD CYLINDERS
BCS y Q ua lit Support SOLUTIONS for the Plastic Bottle Blowing Industry DIRECT REPLACEMENT FOR SIDEL SERIES AND SERIES MACHINES P U O C PACK TI A S y er iv el D ENTS GR N O G COM P IN G SERIES BCS STRETCH
More informationFeatures. Specification. Model. Acting type. Tube I.D. (mm) Stroke (mm) 5, 10, 15 5, 10, 15, 20. Port size. Proof pressure.
MCGS series ø6, ø0 Features Multi-ports as standard enabling both direction mounting. Non-rotating accuracy ± 0. mbedding type sensors. The sensor cable will be in the same direction as the piping tube
More informationCompact Cylinder With Solenoid Valve
Compact Cylinder With Solenoid Valve Series ø, ø, ø, ø Valve and compact cylinder integrated for compactness Solenoid valve abor saving No need to select size of valve ess piping work Compact cylinder
More informationDIRECT REPLACEMENTS. phdinc.com (800) INCREASE PRODUCTION REDUCE MAINTENANCE REDUCE DOWNTIME REDUCE SCRAP STRETCHING CYLINDERS
SOLUTIONS A BLOW division MOLDING SOLUTIONS of PHD P Quality SIDEL Support Delivery PLASTIC PACKAGING COMPONENTS P ASTIC PACKAGING COMPONENTS GRO DIRECT REPLACEMENTS phdinc.com (800) 624-8511 INCREASE
More informationacting, spring return, spring extend and double rod models. Hall Effect sensors and magnetic piston versions are also available.
AIR FORCE ONE COMPACT CYLINDER Clippard Instrument Laboratory, Inc. Air Force One compact cylinders are available in double acting, spring return, spring extend and double rod models. Hall Effect sensors
More informationIdeal for part clamping in weld areas
PIN LOCATING CLAMPS FOR THE AUTOMOBILE INDUSTRY Series PLK Ideal for part clamping in weld areas Completely enclosed finger/pin prevents weld slag from entering Locking mechanism holds panel in place if
More informationExtruded Thrusters. Brochure
Extruded Thrusters Brochure Chrome plated stainless steel guide shafts optimize bearing performance Mounting flexibility: Through & C-bore Tapped bottom Tapped rear Bottom T-slots Bronze bushing for heavy
More informationFDXS Series. required at temperatures below 0 C (32 F) None required, or ISO VG32. 0 ~ 5mm Standard with rubber bumper (both sides)
Bulletin FDXS-09 Features 1. Magnetic piston is standard in all sizes. 2. Non-rotating design enables precision positioning. ng. 3. Compact design saves space. 4. Suitable for multi-axis assemblies and
More informationSmart Solutions. Powerful Products. PNEUMATIC ACTUATOR SERIES 227
Smart Solutions. Powerful Products. PNEUMATIC ACTUATOR SERIES 227 Features and Benefits Thirteen Sizes Rack and Pinion Design Double Acting and Spring Return Break and Seat Combinations Multiple spring
More informationCompact Cylinder. With a short overall length, the space saving cylinder helps to make various jigs and equipment more compact.
Compact Cylinder Series CQ ø, ø, ø, ø, ø, ø, ø, ø, ø, ø, ø, ø1, ø With a short overall length, the space saving cylinder helps to make various jigs and equipment more compact. Variations Standard Series
More informationBimba Extruded Linear Thrusters 2X FF X EE DP 2X DD 2X Ø DD X EE DP U V W X Y Z R S Dimensions - ET T B 4X TAP AA THRU Ø BB C BORE X CC DP (OPP.SIDE)
Bimba Extruded Linear Thrusters Engineering Specifications Maximum Operating Pressure 140 psi (10 bar) Temperature Range 15 to 160 degrees F (-10 to 70 degrees C) Expected Service Life 1,500 miles (with
More informationDouble Acting Spring Assist
1.144 RPS Spring Assist 2-Jaw Parallel Grippers Patented double wedge design: his gripper utilizes our patented double wedge design for actuation and synchronization. Fail safe operation: he force supplied
More information2 way basic mounting: Through-hole or both ends tapped
Compact Cylinder Series ø, ø, ø, ø Ideal for machine designs with small space requirements The D-M auto switch will not protrude from switch mounting groove. Square body shape gives you flexibility for
More informationLinear Slides Pneumatic
Linear Slides Pneumatic Mini DLM Modular Series DLM Series No Adaptor Plates Required! DLM-07M-50-50-P mini linear slide. Shown smaller than actual size. Highly Configurable Modular Automation Exclusive
More informationSpecification. Medium. Proof pressure. Ambient temperature. Lubrication. Cushion. Sensor switch (*) RCA for ø50 RCB, RCE, RCE1, RDEP
MSB* series Specification Medium Model Operating pressure range Proof pressure Ambient temperature Lubrication Cushion MSB* Air.2~1 MPa 1.5 MPa -5~+6 C (No freezing) Not required With rubber cushion pad
More informationFOR PART CLAMPING IN WELD AREAS
PLk SERIES PLK PIN LOCATING CLAMP for the Automotive Industry IDEAL FOR PART CLAMPING IN WELD AREAS Enclosed Finger Weld Field Immune Switches PLK01 A ORDERING DATA: SERIES PLK CLAMPS INDEX: Ordering Data
More informationClimax Pneumatics. ISO 6432 Interchangeable Cylinders Easley, South Carolina
Climax Pneumatics ISO 6432 Interchangeable Cylinders 1-800-732-8704 Easley, South Carolina End Caps Anodized Aluminum Tube Stainless Steel AISI 304 Piston Seals Rod Bushing Brass ø 8-10 - 12 Polyurethane
More informationC-Series Cylinders: Table of Contents
C-Series Cylinders: Table of Contents C-Series C-Series Slide Features... pg. 2 CD and CE Series... pg. 3 Quick Reference... pg. 3 How to Order: C Series... pg. 4 Options: C Series... pg. Dimensional Data
More informationINTEGRATED HYDRAULIC BRAKE ACTUATORS
INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE The integrated hydraulic brake is comprised of a pneumatic cylinder that acts as an actuator and an oleo-dynamic circuit
More informationCompact Cylinder: Standard Type Double Acting, Single Rod. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. How to Order. Piping A76H A72H 200 V
Compact Cylinder: Standard Type Double cting, Single Rod,,,,,,,,, How to Order Without auto switch D With auto switch CDQ2 D JW S uilt-in magnet Mounting style Through-hole (Standard) oth ends tapped style
More informationgrippers pneumatic precision parallel movement DPP DirectConnect Series
grippers pneumatic precision parallel movement DPP Directonnect Series DPP Series No Adaptor Plates Required! Shown smaller than actual size. D-1M-E--5 linear thruster slide. Precision Gripping Preloaded
More informationpneumatic grippers parallel jaws DirectConnect TM DPG Series
pneumatic grippers parallel jaws DirectConnect TM Modular Series DPG Series Grippers Can be Mounted and Operated in Any Orientation Up to 5 million Cycles in Typical Life Cycle Temperature Operating Range
More informationRODLESS BAND CYLINDERS WITH CARRIER BRACKET-TYPE STB SERIES 446
RODESS BAND CYINDERS WITH CARRIER BRACKET-TYPE STB SERIES 446 OPERATING PRINCIPE Set in motion with pneumatic energy, the piston moves in an extruded alumunium tube containing a slot running the length
More informationFULL COLOR TAB #11 IT AB121
FULL COLOR TAB #11 IT AB121 208 AB121 Air SERIES: AUTO RECIPROCATING AIR BOOSTER Model Numbers: AB121 & AB221 This 2:1 ratio air-to-air booster is compact and self-contained. Unit incorporates integral
More informationP1Z Series. Magnetically Coupled Rodless Air Cylinders Contents
Magnetically Coupled Rodless Air Cylinders Contents Basic Version Features... 15 Ordering Information... 151 Specifications... 152 Technical Data... 153 Dimensions... 154 Mountings... 155 uided Version
More informationFKHS Series. 3 Jaw Parallel Motion Pneumatic Grippers. Mounting Hole. Sensor Capable. Bottom tapped holes. Dowel Hole & Slot
Catalog No. KHS- KHS Series Jaw Parallel Motion Pneumatic Grippers Mounting Hole Can be mounted from the gripper side Mounting slot for easy sensor installation Sensor Capable Bottom tapped holes Can be
More informationFour Shaft Linear Thrusters
Four Shaft Linear Thrusters FOUR SHAFT THRUSTERS Three Models with bores from 2 to 4 Twice the load capacity of comparable two shaft units Reduced deflection and bearing play Compact, light weight robust
More informationParallel Grippers- DPDS DIRECTCONNECT Modular Series
Courtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (8) 426-548 www.cmafh.com 1.134 Parallel Grippers- DPDS DIRECTCONNECT Modular Series Mounting Information: Grippers
More information22mm. Compact Guide Cylinder (Basic type) New. Up to. Series MGP. Weight reduced!
1-161 Compact Guide Cylinder (Basic type) ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 Up to 17% Weight reduced! New Weight reduced by up to 17% with a shorter guide rod and thinner plate Guide rod
More informationOur policy is one of continued research and development. We therefore reserve the right to
D/99000, D/99000 ompact cylinders on-magnetic and magnetic piston Double acting Ø 12 to 160 mm ight weight ompact design, which is considerably shorter than IS/VDA or FA equivalent. ow friction characteristics
More information1.7 kg. % lighter. 1.9 kg. Air Cylinder. Weight MB1. Reduced weight by changing the shape of the rod cover and head cover.
Air Cylinder 1 Series ø32, ø40, ø50, ø63, ø80, ø100, ø125 RoHS 10 (ø50-100 stroke) % lighter Current model 1.9 kg 1 Series 1.7 kg J 1 Reduced weight by changing the shape of the rod cover and head cover.
More informationMiniature Guide Rod Cylinder ±0.1. Mounting from 2 directions
Miniature Guide Rod Cylinder Series Non-rotating accuracy : Height ±0.1 Mounting from 2 directions idth Overall length Two auto switches can be mounted even for mm strokes Integral wiring/piping to one
More informationPneumatic cylinders, piston-ø 8 25 mm Single acting DIN ISO 6432
Pneumatic cylinders, piston-ø 25 mm Single acting DIN ISO 6432 Technical data for series HE Order code HE-16-025 Series Piston-Ø Stroke length (mm) Design and function Single acting pneumatic cylinder
More informationSeries MBB ø32, ø40, ø50, ø63, ø80, ø100
Air Cylinder/End ock Series ø, ø, ø, ø, ø, ø ow to Order Standard ith auto switch MD A F G C D T uilt-in magnet Mounting asic/ithout bracket Axial foot Front flange Rear flange Single clevis Double clevis
More informationINFORMATION SHEET: SERIES GRT 3 JAW PARALLEL GRIPPERS
INFORMATION SHEET: SERIES GRT 3 JAW PARALLEL GRIPPERS IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance or machine documentation.
More information3 Position Cylinder. RZQ Series. Provides intermediate stop mechanism. ø32, ø40, ø50, ø63. 2-stage stroke enabled with a small increase in length
Position ylinder Series ø, ø, ø, ø Provides intermediate stop mechanism 2-stage stroke enabled with a small increase in length Overall length of cylinder tube DQ2 Full stroke First-stage stroke dditional
More informationCompact Cylinder. ISO Standard (21287) C55 Series. ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. RoHS C85 C75 C96 C96Y C96K C55
55 96Y 96K 96 P96K P96 75R 75K-S/T 75K 75-S/T 75W 75 85R 85K-S/T 85K 85-S/T 85W 85 ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100 Related ade to uto Products Order Switch ompact ylinder 55 Series ISO Standard
More informationElliptical design for space-savings
Plate Cylinder Series,,,, By adopting an elliptical piston design, a slim, square shaped body has been achieved, resulting in a space-saving cylinder with unrestricted mounting directions. Elliptical design
More informationTable of Contents. ISO/VDMA Series
Table of Contents ISO/VDMA Series...3-22 Features and Benefits... 3 How to Order.... Technical Information... 5 Dimensions Profile Version...6-7 Tie-Rod Version...8-9 Mounting Parts...-16 Switches... 17
More informationHeavy Duty Actuators CONTROLS. Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to 1,600,000 in. lbs. Double Acting and Spring Return
CONTROLS Division of A-T Controls Heavy Duty Actuators Pneumatic Actuators for Quarter-Turn Valves and Dampers Torques to,600,000 in. lbs. Double Acting and Spring Return THD S E R I E S The Triac line
More informationSINGLE ROD Pneumatic. Major Benefits
SINGL ROD Pneumatic SPMNT Major enefits Ideal for shot pin applications Shock pad options reduce noise and minimize end of stroke shock Imperial or metric versions available Simple construction for easy
More informationM/44000/M. LINTRA Rodless cylinders Magnetic piston Double acting Ø 25 to 40 mm
LINTRA Rodless cylinders Magnetic piston Double acting Ø 5 to 40 mm New compact, space-saving design Proven sealing system Integral switch mounting Adjustable cushioning Magentic piston as standard Technical
More informationNFPA Double acting imperial cylinders
> > Ø 4... 8 > > Adjustable captive cushion needle > > Constructed of the finest materials > > Magnetic piston standard > > Wide temperature range > > Shock and vibration tested to N 61373, Category 1,
More informationMulti-Act Integrated Motion Controller
Multi-Act Integrated Motion Controller Multi-Act Overview FEATURES 3 Multi-Act Dimensional Information DESCRIPTION Multi-Act s Integrated Motion Actuators have an output shaft which produces both linear
More informationSlide Unit. CX2/CXWM/CXWL Series. Slide Bearing/CX2:ø10, ø15, ø25 CXWM:ø10, ø16, ø20, ø25, ø32 Ball Bushing Bearing/CXWL:ø10, ø16, ø20, ø25, ø32
Slide Unit CX/M/L Series Slide Bearing/CX:ø0, ø, ø5 M:ø0, ø, ø0, ø5, ø3 Ball Bushing Bearing/L:ø0, ø, ø0, ø5, ø3 Provided with shock absorbers to absorb impact and noise. The slide unit can absorb energy
More informationISO CYLINDERS Ø ACTUATORS
ISO 15552 CYLINDERS Ø 250-320 1 Cylinders made to ISO 15552 available in various versions and with a wide range of accessories: double-acting single-or through-rod with or without cushioning configuration
More information240% 19% reduced. Compact Slide. MXH Series. Improved by up to. With new high rigidity linear guide. 369g. ø6, ø10, ø16, ø g.
Compact Slide Series ø, ø, ø, ø RoHS Allowable moment MXS Improved by up to MXQ MXQ 2% MXF MXW MXJ MXP MXY With new high rigidity linear guide MTS Allowable moment improvement illustrated below Allowable
More informationHow to Order. Nil M. Action S T. Load voltage Wiring. M9NV 5 V, 12 V 3-wire (PNP) M9PV 12 V. F9NWV 5 V, 12 V 3-wire (PNP) F9PWV
ompact ylinder: Standard Type Single cting, Single Rod, Spring Return/Extend Series QS ø, ø, ø, ø How to Order QS S QS S FWV S uilt-in magnet Mounting style Through-hole/oth ends tapped common (Standard)
More informationDURA-SCAPE CC-SERIES. Non-Rotating Air Cylinder CC-1 CC-2 TECHINICAL SPECIFICATION OPERATING PRINCIPLES
CC Series of Non-Rotating Air Cylinders are designed as multi purpose units. The CC series is designed for applications where all the features of our SC series are not required, while still offering the
More information3 Position Cylinder. ø32, ø40, ø50, ø63 RZQ CDQ2. Bore size (mm)
Position ylinder Series ø, ø, ø, ø Provides intermediate stop mechanism 2-stage stroke enabled with a small increase in length Overall length of cylinder tube First-stage stroke Full stroke dditional cylinder
More informationBimba Metric Flow Controls: FCPM Series M5 Port Mounted Flow Control Valves For M5 port, FCPM-1-Q4-L 4mm OD tubing 2mm ID tubing For M5 port, 4mm OD t
Bimba Metric Flow Controls: FCPM Series Specifications Fluid Maximum Operating Pressure Minimum Operating Pressure Temperature Range 3 Air 10 Bar (145 PSI) 0.1 Bar (1.5 PSI) -10º to +80ºC (-14º to +176ºF)
More informationTable of Contents FE Series Features and Benefits
Table of Contents FE Series.................................................................................... -6 Features and Benefits..................................................................................
More informationTable of Contents ISO
Table of Contents ISO 6432...3-12 Features and Benefits...3 How to Order....4 Dimensions Single Rod End, Single and Double Acting...5 Single and Double Acting-Double Rod...6 Mounting Accessories...7-10
More informationAB121Booster ITSeriesIntensifiers. Reservoirs&Tanks. ITSeries Page190
AB121 ITSeries Reservoirsand AB121 Page188 ITSeries Page190 Reservoirs& Page192 95% OFOURCYLINDERSSHIPIN2-3DAYS! ONEDAYRUSHSERVICEAVAILABLEONALLCATALOGEDCYLINDERMODELS! AB121 Air SERIES: AUTO RECIPROCATING
More information2 way basic mounting: Through-hole or both ends tapped
Compact Cylinder Series CQS ø, ø, ø, ø Ideal for machine designs with small space requirements The D-M auto switch will not protrude from switch mounting groove. Square body shape gives you flexibility
More informationSeries QP - QPR short-stroke cylinders 1/ Series QP: single and double-acting
CATALOGUE > Release 8.7 > Series QP - QPR cylinders Series QP - QPR short-stroke cylinders Series QP: single and double-acting, magnetic Series QPR: double-acting magnetic, non-rotating ø 2, 6, 20, 25,
More informationZ-Series.qxp:TurnAct Cseries.qxp 10/1/09 2:35 PM Page ii Z-Series Cylinders
Z-Series Cylinders Z-Series Cylinders: Table of Contents Z-Series Slide Features...pg. 2 ZD and ZE Series...pg. 3 Quick Reference...pg. 3 How to Order: Z Series...pg. 4 Options: Z Series...pg. 5 Dimensional
More informationPRODUCT CATALOG COMPACT HYDRAULIC SPACE-SAVING, LONG-LASTING DEVICES FOR DEMANDING DESIGN REQUIREMENTS.
PRODUCT CATALOG COMPACT HYDRAULIC SPACE-SAVING, LONG-LASTING DEVICES FOR DEMANDING DESIGN REQUIREMENTS. TABLE OF CONTENTS 3 Compact Hydraulic 4 Product Features 4 Features and Benefits 5 How to Order 6
More informationProduct series extended even more! Non-rotating Type. Offers 3 types of non-rotating operation types. push type cylinders. pull type cylinders
The Pen Cylinder s compactness and easy handling make production lines in a broad range of industries. new release with even lighter weight and more PEN CYLINDERS Product series extended even more! The
More information