The Price Alternative Pneumatic Cylinders and Slides

Size: px
Start display at page:

Download "The Price Alternative Pneumatic Cylinders and Slides"

Transcription

1 The Price Alternative Pneumatic Cylinders and Slides OCG Round Body Pneumatic ISO Air The Price Alternative OCQ Round Body Pneumatic ISO Air The Price Alternative OCV ISO Air The Price Alternative SERIES SIZE MAX STROKE MAX FORCE in lb 14 psi [1 bar] 2 3/4" " /4" /2" " /2" psi [1 bar] psi [1 bar] NOTE: Consult PHD for longer strokes (8)

2 The Price Alternative Pneumatic Cylinders and Slides The data shown is presented as a quick reference tool for determining which slide may fit your requirements. Refer to engineering data pages for more information. It is recoended to use the PHD online sizing app to easily and confidently determine which slide is best suited for your requirements. SERIES MODEL MAX STANDARD TRAVEL MAX THRUST* MAX DYNAMIC MOMENTS PITCH YAW ROLL MAX LOAD HORIZONTAL** OSD Pneumatic Thruster The Price Alternative in in in-lb Nm in-lb Nm in-lb Nm lb kg OSDD OSDD OSDD OSH Compact Pneumatic Slide Table The Price Alternative OSH OSH OSH OSH OSP Compact Pneumatic Thruster The Price Alternative OSPC OSPC OSPC OSPC OSPC OSPC OSPC OSPC OSW Dual Bore Pneumatic SlideTable The Price Alternative OSW OSW OSW OSW OSX Light Duty Pneumatic Thruster OSW OSW OSXC The Price Alternative OSXC OSXC OSXC OSXC * Maximum thrust shown is at the maximum psi [bar] operating pressure possible for that slide. See respective engineer specifications. ** Maximum load horizontal shown is at the minimum travel length respective to that series and size of slide. (8)

3 OCG Pneumatic Round Body Cylinders The Price Alternative BENEFITS Imperial and metric models to match machine builders' specifications Magnets standard for switch sensing capability Standard cushions to reduce end of travel impact 6 bore sizes with 1 stroke lengths available to fit a variety of applications Drop-in mounting to match global standard optional switch bundle for ease of ordering includes 2 switches with band brackets Component Head & Cap Cylinder Tube Rod Seal Piston Seal O-Rings Cushion Seal Cushion Needle Piston Wear Ring Rod Bushing Rod Nut Piston Rod* Materials Anodized Aluminum Alloy NBR Brass PTFE PTFE and Bronze Alloy Carbon Steel cushion controls on both ends to reduce impact at end of stroke rugged and lightweight anodized aluminum alloy head, cap, and tube hard chrome-plated steel piston rod provides maximum wear resistance *size 3/4", 1", 2 and 25 have stainless steel bearing alloy rod bushing provides rod support and smooth cycling NBR cushion and tube seals magnet on piston for externally mounted switches PTFE wear ring provides piston support and smooth cycling *Stainless steel sizes 3/4", 1", 2 and (8)

4 ORDERING DATA Optimax OCG Cylinders IMPERIAL DESIGN NO. 1 = Imperial BORE SIZE in 3/ /4 1-1/ /2 AREA in STROKE Standard Lengths in * 12* *Not available 3/4 in Bore MODEL NO. SWITCH BUNDLE (OPTIONAL) OCG 1 1-1/2 x 4 - ST N K 2 DESIGN NO. 5 = Metric METRIC BORE SIZE AREA STROKE Standard Lengths * 3* *Not available 2 Bore Switch Circuitry D = DC Reed N = DC Solid State NPN - Sink P = DC Solid State PNP - Source Cable Type K = Quick Connect 2 = 2 Meter Cable NOTES: 1) Switch bundle includes 2 switches and 2 mounting brackets. Bundle available with actuator only. 2) Magnets and cushions standard both directions. 3) See page 9 for mounting accessories. Switches & Brackets Imperial Repair Kit Bore Part in No. 3/ / / / Cordsets Model Number Cable Length in [2 m] in [5 m] Includes one cordset Part Number Description Reed DC 5-3 V, 5mA, Quick Connect Reed DC 5-3 V, 5mA, 2m Cable Sink Type (NPN), DC 5-3 V, 5mA, Quick Connect Sink Type (NPN), DC 5-3 V, 5mA, 2m Cable Source Type (PNP), DC 5-3 V, 5mA, Quick Connect Source Type (PNP), DC 5-3 V, 5mA, 2m Cable Round Cylinder Switch Band Bracket Includes one switch or bracket CAD & Sizing Assistance Use PHD's free online Product Sizing and CAD Configurator at (8)

5 ENGINEERING DATA Optimax OCG Cylinders Specifications Operating Air Pressure Temperature Limits Velocity Rated Life Lubrication Series OCG Cylinder 8 to 14 psi [.5 to 9.7 bar] 32 to +14 F [ to +6 C] 2 to 2 in/s [5 to 5 /s] 3 million cycles Factory lubricated for rated life Bore Rod Total Piston Base Adder Diameter Rod Area Weight Per 1 in [25 ] Direction in in in 2 2 lb kg lb kg 3/ Extend Retract Extend Retract / Extend Retract / / Extend Retract Extend Retract Extend Retract Sizing & Application Assistance Use PHD's free online Product Sizing Application or view the Product Sizing Catalog at: Lateral Load Bore 1 in 25 2 in 5 3 in 75 Maximum Lateral Load by Stroke 4 in 1 5 in in 15 7 in 8 in 2 1 in in 3 in oz g oz g oz g oz g oz g oz g oz g oz g oz g oz g 3/ / / / Impact Velocity in/s [m/s] 25 [.64] 2 [.51] 15 [.38] 1 [.25] 5 [.13] 1 [4.5] Maximum Kinetic Energy OCG1-3/4 & OCG5-2 2 [9.1] 3 [13.6] 4 [18.1] 5 [22.7] 6 [27.2] Impact Velocity in/s [m/s] Maximum Kinetic Energy OCG1-1 & OCG [.64] 2 [.51] 15 [.38] 1 [.25] 5 [.13] [4.5] [9.1] [13.6] [18.1] [22.7] [27.2] [31.8] [36.3] 9 [4.8] Impact Velocity in/s [m/s] 25 [.64] 2 [.51] 15 [.38] 1 [.25] 5 [.13] 2 [9.1] Maximum Kinetic Energy OCG1-1-1/4 & OCG [18.1] 6 [27.2] 8 [36.3] 1 [45.4] 12 [54.4] 14 [63.5] 16 [72.6] Total Attached Load lb [kg] Total Attached Load lb [kg] Total Attached Load lb [kg] Impact Velocity in/s [m/s] 25 [.64] 2 [.51] 15 [.38] 1 [.25] 5 [.13] Maximum Kinetic Energy OCG1-1-1/2 & OCG5-4 5 [22.7] 1 [45.4] 15 [68.] 2 [9.7] 25 [113.4] Impact Velocity in/s [m/s] 25 [.64] 2 [.51] 15 [.38] 1 [.25] 5 [.13] 5 [22.7] Maximum Kinetic Energy OCG1-2 & OCG5-5 1 [45.4] 15 [68.] 2 [9.7] [113.4] [136.] [158.8] [181.4] Impact Velocity in/s [m/s] 25 [.64] 2 [.51] 15 [.38] 1 [.25] 5 [.13] 1 [45.4] Maximum Kinetic Energy OCG1-2-1/2 & OCG [9.7] 3 4 [136.] [181.4] 5 [226.8] 6 [272.1] 7 [317.5] Total Attached Load lb [kg] Total Attached Load lb [kg] Total Attached Load lb [kg] (8)

6 DIMENSIONS Optimax OCG Cylinders A KK 2 D FLATS H A Y K ZB + STROKE 2X EE PORT P Ø B 4X DD H N K OCG5-2 & 25 ONLY KK Ø MM Ø B W V ZZ + STROKE LB + STROKE C V TE TF 4X DD SQ R Ø E Ø TD SQ R D FLATS H1 HEX TA 4X TC C TB TG SECTION C-C 4X EACH FEATURE DIMENSION N Letter Dim Imperial 3/4 in 1 in 1-1/4 in 1-1/2 in 2 in 2-1/2 in A B / / / / / / -.15 D DD 8-32 x.28 DP 1-32 x.3 DP 1-32 x.3 DP 1/4-28 x.47 DP 5/16-24 x.63 DP 3/8-24 x.63 DP / -.5 M4 x.7 x 7 DP / -.5 M5 x.8 x 7.5 DP / -.5 M5 x.8 x 8 DP Metric / -.5 M6 x 1. x 12 DP 3 +. / -.5 M8 x 1.25 x 16 DP E / -.5 M1 x 1.5 x 16 DP EE 1/8 NPT 1/8 NPT 1/8 NPT 1/8 NPT 1/4 NPT 1/4 NPT G 1/8 G 1/8 G 1/8 G 1/8 G 1/4 G 1/4 H H K KK 1/4-28 5/ /16-2 7/16-2 1/2-2 1/2-2 M8 x 1.25 M1 x 1.25 M1 x 1.25 M14 x 1.5 M18 x 1.5 M18 x 1.5 LB MM N P R.55 ±.4.65 ±.4.79 ± ± ± ±.4 14 ± ±.1 2 ±.1 26 ±.1 32 ±.1 38 ±.1 TA TB TC M5 x.8 M6 x.75 M8 x 1. M1 x 1.25 M12 x 1.25 M14 x 1.5 M5 x.8 M6 x.75 M8 x 1. M1 x 1.25 M12 x 1.25 M14 X 1.5 TD / / / / / / / / / / / -. TE TF TG V W Y ZB ZZ / -. CAD & Sizing Assistance Use PHD's free online Product Sizing and CAD Configurator at All dimensions are reference only unless specifically toleranced. (8)

7 ACCESSORIES Optimax OCG Cylinders REAR FLANGES Imperial xx Metric xx REAR HINGE CLEVIS Imperial xx Metric xx TRUNNION PINS xx REAR HINGE PIN xx FRONT FLANGE Imperial xx Metric xx BASE MOUNTING Imperial xx Metric xx DASH NO. - 2 Cylinder BASE MOUNTING Imperial xx Metric xx HINGE TRUNNION BRACKET xx 1 = 3/4 Bore ( 2) 2 = 1 Bore ( 25) 3 = 1-1/4 Bore ( 32) 4 = 1-1/2 Bore ( 4) 5 = 2 Bore ( 5) 6 = 2-1/2 Bore ( 63) Mounting Attachments Base Part No. Cylinder Imperial Metric Description Dash No xx Base Mounting xx Front or Rear Flange Mounting xx Trunnions xx Rear Hinge Clevis xx Rear Hinge & Trunnion Bracket xx Rear Hinge Pin EXAMPLE: is a base mounting kit for a size 1-1/4 bore cylinders. Metric Recoended Attachment Mounting Torques Bore Mounting Torque Trunnion Torque in in-lb Nm in-lb Nm 3/ / / / Rod Eye with Spherical Bearing (DIN 8139) Rod Clevis Mounting (DIN 814) Cylinder Standard Kit No. Cylinder Standard Kit No. -Z1 Kit No. OCG OCG OCG OCG OCG OCG Imperial Rod Clevis Mounting Rod Eye Mounting Cylinder Standard Kit No. Cylinder Standard Kit No. OCG1 3/ OCG1 3/ OCG OCG OCG1 1-1/ OCG1 1-1/ OCG1 1-1/ OCG1 1-1/ OCG OCG OCG1 2-1/ OCG1 2-1/ (8)

8 MOUNTINGS & ACCESSORIES Optimax OCG Cylinders Base Mounting 15 B LH LZ M ZZ + STROKE LT M Z X Y LS + STROKE Y X 2X Ø LC LX W 4X Ø LD W NOTE: Kit includes one base mounting bracket and fasteners. Letter Dim Imperial Metric 3/4 in 1 in 1-1/4 in 1-1/2 in 2 in 2-1/2 in B LC LD LH LS LT LX LZ M W X Y Z ZZ Front or Rear Flange Mounting 4X Ø FD F SQ FX SQ B Ø E FT 9-8 Letter Dim Imperial 3/4 in 1 in 1-1/4 in 1-1/2 in 2 in 2-1/2 in B E / / / / / /-.2 ZZ + STROKE / / /-.5 Metric / /-.5 F FX FD FT ZZ All dimensions are reference only unless specifically toleranced. NOTE: Kit includes one flange mounting bracket and fasteners /-.5 (8)

9 MOUNTINGS & ACCESSORIES Optimax OCG Cylinders Rear Clevis Hinge Mounting L RR CZ Ø CD d9 Letter Dim Imperial 3/4 in 1 in 1-1/4 in 1-1/2 in 2 in 2-1/2 in CD d CZ L RR NOTE: Kit includes rear clevis hinge mounting bracket and fasteners. Metric Rear Hinge Pin L L1 T D1 D NOTE: For use with rear clevis hinge mount. Kit includes two retaining rings and one rear hinge pin. Letter Dim Imperial 3/4 in 1 in 1-1/4 in 1-1/2 in 2 in 2-1/2 in D d D L L T Metric CAD & Sizing Assistance Use PHD's free online Product Sizing and CAD Configurator at All dimensions are reference only unless specifically toleranced (8)

10 MOUNTINGS & ACCESSORIES Optimax OCG Cylinders Hinge and Trunnion Bracket TZ TN TU Ø TD e8 PIN DIA TV TS TT TB TH TW Ø TR TU Ø TR 4XØ TF TW TB TH Ø TE TX NOTE: Kit includes two trunnion pins and one trunnion bracket. Omit trunnion pins when used with rear clevis hinge mount. TY Imperial Metric Letter Dim 3/4 in 1 in 1-1/4 in 1-1/2 in 2 in 2-1/2 in TB TE / / / / / / / / / / /-. TF TH.98 ± ± ± ± ± ± /-. 25 ±.1 3 ±.1 35 ±.1 4 ±.1 5 ±.1 6 ±.1 TN TR TT TU TV TW TX TY TS TZ TD Trunnion Mounting TR TS BRKT MTG RANGE 2X Ø TD PIN DIA ZF TZ ZR + STROKE NOTE: Kit includes two trunnion pins. Letter Dim Imperial 3/4 in 1 in 1-1/4 in 1-1/2 in 2 in 2-1/2 in TD e TR TS TZ ZF ZR Metric 9-1 All dimensions are reference only unless specifically toleranced. (8)

11 OCV Pneumatic Round ISO Cylinders The Price Alternative BENEFITS Series OCV Cylinders are ISO 6431 The price alternative to the PHD Series CV Pneumatic Cylinder 32, 4 & 5 bores 25, 5, 1 & 2 stroke lengths Component Head & Cap Cylinder Tube Rod Seal Piston Seal O-Rings Cushion Seal Piston Rod Rod Nut Cushion Needle Rod Bushing Materials Painted Aluminum Alloy Anodized Aluminum Alloy Polyurethane NBR Carbon Steel Brass PTFE and Bronze Alloy wear ring provides piston support and smooth cycling optional switches and brackets for end position sensing magnet on piston for externally mounted switches cushion controls on both ends to reduce impact at end of stroke self-compensating rod seal and wiper bearing provides rod support and smooth cycling (8)

12 ORDERING DATA Optimax OCV Cylinders MODEL NO. TYPE S = Single Rod Bore SIZE Area 2 [in 2 ] 84 [1.25] 1257 [1.95] 1963 [3.5] SWITCH BRACKET (OPTIONAL) OCV S 5 32 x - 25 ST 2 DESIGN NO. 5 = Metric NOTES: 1) Magnets standard on all units 2) Cushions and cushion controls standard on all units STROKE Standard Stroke Lengths [] Contact PHD for other strokes Switch Circuitry D = DC Reed N = DC Solid State NPN - Sink P = DC Solid State PNP - Source Cable Type K = Quick Connect 2 = 2 Meter Cable Note: Includes 2 switches and 2 mounting brackets Bundle available with actuator only Switches Part Number Description Reed, DC 5-3V, 5mA w/quick Connect Reed, DC 5-3V, 5mA w/2m Cable Solid State NPN, DC 5-3V, 5mA w/quick Connect Solid State NPN, DC 5-3V, 5mA w/2m Cable Solid State PNP, DC 5-3V, 5mA w/quick Connect Solid State PNP, DC 5-3V, 5mA w/2m Cable Includes one switch. Cordsets Model Number Cable Length in [2 m] in [5 m] Includes one cordset. Trunnion Mount Bore Part Number Notes: 1) Trunnion mount incompatible on 25 stroke units with a single switch. 2) Trunnion mount incompatible on 25 and 5 stroke units with two switches. 3) Trunnion installation requires end user to remove and reinstall the cylinder cap. CAD & Sizing Assistance Use PHD's free online Product Sizing and CAD Configurator at (8)

13 ENGINEERING DATA Optimax OCV Cylinders Specifications Operating Air Pressure Temperature Limits Velocity Rated Life Lubrication Series OCV Cylinder 1 to 1 bar [15 to 15 psi] -5 to +7 C [23 to +158 F] 5 to 8 /s [2 to 31 in/s] 3 million cycles Factory lubricated for rated life Bore Rod Effective Base Adder Dia Rod Area Weight Per 25 Direction 2 in 2 g oz g oz Extend Retract Extend Retract Extend Retract Sizing & Application Assistance Use PHD's free online Product Sizing Application or view the Product Sizing Catalog at: Bore SPEED DATA - STANDARD UNITS Bore Acceleration Time Stroke During Acceleration s in NOTES: The above speed data is based on: A) No attached loads B) Line pressure of 6 bar [87 psi] C) Valve and tubing rated at Cv=5 CYLINDER FORCE TABLE Rod Effective Dia Rod Area Direction 2 in 2 Extend Retract Extend Retract Extend Retract Impact Velocity m/s [in/s] Impact Velocity m/s [in/s] 2 [78] 1.5 [58] 1 [39].5 [19] 3 [116] 2.5 [97] 2 [78] 1.5 [58] 1 [39].5 [19] 1 [22] 1 [22] MAXIMUM ALLOWABLE KINETIC ENERGY 2 [44] 3 [66] 32 BORE 2 3 [44] [66] Total Attached Load kg [lb] 4 [88] 4 BORE 5 [11] 6 [132] Total Attached Load kg [lb] 7 [154] 4 [88] 8 [176] 9 [198] 5 [11] 1 [22] Bore Normal Stroke [L] Full Stroke Tolerance in L > 5 +2./- +.8/- 5 < L > /- +.13/- L > 5 +2./- +.8/- 5 < L > /- +.13/- L > 5 +2./- +.8/- 5 < L > /- +.13/- Impact Velocity m/s [in/s] 1.75 [68] 1.5 [58] 1.25 [48] 1 [39].75 [29].5 [19].25 [1] 5 BORE 2 [44] 4 [88] 6 [132] 8 [176] 1 [22] Total Attached Load kg [lb] 12 [265] 14 [39] (8)

14 DIMENSIONS Optimax OCV Cylinders NUT PER ISO 435 AM f9 BG PL 2X *EE Ø BA PC E R Ø B Ø DK DC KK THREAD SW ACROSS WRENCH FLATS f2 WH VD G f8 + STROKE DE G VA 8X RT THD NOTES: 1) Dimensions are in. 2) Designated centerline is centerline of cylinder. 3) Unless otherwise dimensioned, mounting hole patterns are centered on designated cylinder centerline. 4) *EE conforms to ISO 163. Bore Ø B RT WH f2 R M6 x 1 M6 x 1 BG MIN VD VA MAX G f8 f9 E MAX SW (WRENCH FLAT) Ø BA KK AM *EE PORT M1 x 1.25 M12 x 1.25 M8 M16 x x 1.5 PL PC DE DC Ø DK 22. G 1/ G 1/ G 1/ Trunnion Mount Accessory TL TM TL TK 2X Ø TD UW NOTES: 1) Dimensions shown assume no switch brackets are installed. 2) Trunnion mount incompatible on 25 stroke units with a single switch. 3) Trunnion mount incompatible on 25 and 5 stroke units with two switches. 4) Trunnion installation requires end user to install. Bore XV + STROKE Part No. Ø TD e9 TK MAX TL** MAX TM MAX UW MAX XV MIN * TM max for bore size 32 does not conform to ISO 6431 (MT4) and ISO (MT4) ** TL max dimensions do not conform to ISO 6431 (MT4) and ISO (MT4) Switches and Brackets Brackets Bore Switch Bracket Number Switches Part Number Description Reed, DC 5-3V, 5mA w/quick Connect Reed, DC 5-3V, 5mA w/2m Cable Solid State NPN, DC 5-3V, 5mA w/quick Connect Includes one bracket. Cordsets Model Number Cable Length Solid State NPN, DC 5-3V, 5mA w/2m Cable Solid State PNP, DC 5-3V, 5mA w/quick Connect Solid State PNP, DC 5-3V, 5mA w/2m Cable in [2 m] Includes one switch in [5 m] 9-14 Includes one cordset. (8)

15 MOUNTING ACCESSORIES Optimax OCV Cylinders MP2 PIVOT PINS Bore Std Kit No. -Z1 Kit No REAR FORK MOUNTING (MP2 PER VDMA 24562) Bore Std Kit No. -Z1 Kit No NOTE: Includes pivot pin hardware. PILLOW BLOCK MOUNTING WITH RIGID BEARINGS (BMP4, CETOP RP 17P) Bore Std Kit No FASTENER MOUNTING (MX1) Bore Std Kit No. -Z1 Kit No RECTANGULAR FLANGE MOUNTING Bore Std Kit No. -Z1 Kit No BASE MOUNTING Bore Std Kit No. -Z1 Kit No REAR MALE HINGE MOUNTING MP4 Bore Std Kit No. -Z1 Kit No FASTENER MOUNTING (MX1) Bore Std Kit No. -Z1 Kit No ROD EYE WITH SPHERICAL BEARING (DIN 8139) Bore Std Kit No ROD CLEVIS MOUNTING (DIN 814) Bore Std Kit No. -Z1 Kit No (8)

16 (8)

17 OSX Light Duty Pneumatic Thruster Slide The Price Alternative BENEFITS Standard shock pads reduce end of travel impact 5 bore sizes with up to 7 travel lengths available to fit variety of applications Travel adjustment on retract Magnets standard for switch sensing capability Smooth linear motion at twice the thrust of a single bore size Drop-in metric mounting to match global standard s 12 and 16 are drop-in compatible for competition sizes 1 and 15. Component Body Tool Plate Rod Bearing Retainer Bore Plug Rod Seal Shock Pad Piston Seal O-Rings Tool Plate Fasteners Piston Rods (size 12 thru 2) Piston Rods (size 25 & 32) Port Plugs Travel Adjustment Snap Ring Rod Bearings Materials Anodized Aluminum Alloy NBR Stainless Steel Carbon Steel PTFE and Bronze Composite integrated slots for switches multiple mounting options offer flexibility magnets on pistons for externally mounted switches bearings provide rod support and smooth cycling (8)

18 ORDERING DATA Optimax OSX Slides MODEL NO. BUSHING TYPE C - Slide Bushing SIZE OSX C 5-12 x 1 TRAVEL Travel Length 1, 2, 3, 4, 5, 7*, 1* *Not available on size 12 & 16 SWITCH BUNDLE (OPTIONAL) - SD N K 2 DESIGN NO. 5 - Metric NOTES: 1) Switch bundle includes 2 switches 2) Switch bundle available with actuator only 3) Switches available in Quick Connect only 4) Magnets standard for switch sensing Switch Circuitry D = DC Reed N = DC Solid State NPN - Sink P = DC Solid State PNP - Source Cable Type K = Quick Connect Switches Part Number Description Reed DC 5-3 V, 5mA, Quick Connect Sink Type (NPN), DC 5-3 V, 5mA, Quick Connect Source Type (PNP), DC 5-3 V, 5mA, Quick Connect Includes one switch Cordsets Model Number Cable Length in [2 m] in [5 m] Includes one cordset CAD & Sizing Assistance Use PHD's free online Product Sizing and CAD Configurator at (8)

19 ENGINEERING DATA Optimax OSX Slides Specifications Series OSX Slide Operating Air Pressure 1 to 7 bar [14.5 to 11 psi] Operating Temperature 5 to 6 C [41 to +14 F] Velocity 5 to 5 /sec [2 to 2 in/sec] Rated Life 3 million cycles Lubrication Factory lubricated for rated life Unit Weight by Travel kg oz kg oz kg oz kg oz kg oz kg oz kg oz , Rod Lateral Load Effective Area Direction 2 in 2 Extend Retract Extend Retract Extend Retract Extend Retract Extend Retract Maximum Lateral Loads by Travel kg lb kg lb kg lb kg lb kg lb kg lb kg lb Sizing & Application Assistance Use PHD's free online Product Sizing Application or view the Product Sizing Catalog at: MAXIMUM ALLOWABLE KINETIC ENERGY SIZE SIZE 16.8 SIZE Total Moving Weight kg Total Moving Weight kg Total Moving Weight kg SIZE 25.7 SIZE Total Moving Weight kg Total Moving Weight kg Body Thru & C-Bore Body Bottom Threads Unit (Mounting) Recoended Mounting Torques Body Side Threads Unit (MTG) Tool Plate Face (Tooling MTG) Tool Plate Top & Bottom (Tooling MTG) Nm in-lb Nm in-lb Nm in-lb Nm in-lb Nm in-lb NOTES: 1) Assumes use of at least 75% of full thread depth. 2) Assumes use of high strength steel socket head cap screws. 3) PHD recoends use of threadlocker (8)

20 DIMENSIONS Optimax OSX Slides 2X W THREAD O B A + TRAVEL P D E F CAD & Sizing Assistance Use PHD's free online Product Sizing and CAD Configurator at E G 2X Y THREAD THRU K CC 2X C BORE FOR DD SHCS THIS SIDE AND OPPOSITE SIDE 2X T THREAD THRU 8X GG THREAD 4X THIS SIDE 4X OPPOSITE SIDE 4X FF PORT BB 2X OPPOSITE SIDE 2X THIS SIDE PLUGGED AA BB 4X GG THREAD 2X THIS SIDE 2X OPPOSITE SIDE 4X FF PORT 2X OPPOSITE SIDE 2X THIS SIDE PLUGGED L M C H KK AA N R EE SIZE 2 THRU 32 SIZE 12 AND 16 KK N R EE 2X W THREAD NOTES: 1) Dimensions are in 2) Designated centerline is centerline of unit. E LL G NN Ø SHAFTS LETTER DIM SIZE & 2 3, 4 & 5 1 & 2 3, 4 & 5 1 & 2 3, 4 & 5 7 & 1 1 & 2 3, 4 & 5 7 & 1 1 & 2 3, 4 & 5 7 & 1 A 55 + TRAVEL 6 + TRAVEL 7 + TRAVEL 72 + TRAVEL 82 + TRAVEL B C D E 35 ±.2 45 ±.2 5 ±.2 6 ±.2 75 ±.2 F G H K L M N O P R T M4 x.7 M5 x.8 M6 x 1 M8 x 1.25 M8 x 1.25 Y M4 x.7 M5 x.8 M5 x.8 M6 x 1 M6 x 1 W M3 x.5 x 5 DP M4 x.7 x 6 DP M4 x.7 x 6 DP M5 x.8 x 7.5 DP M5 x.8 x 8 DP AA BB CC DD M3 M4 M5 M6 M6 EE FF M5 M5 M5 G 1/8 G 1/8 GG M3 x.5 x 4.5 DP M4 x.7 x 5 DP M4 x.7 x 5.5 DP M5 x.8 x 7.5 DP M5 x.8 x 7.5 DP KK LL NN Ø 6 Ø 8 Ø 1 Ø 12 Ø All dimensions are reference only unless specifically toleranced. (8)

21 OSD Pneumatic Thruster Slide The Price Alternative BENEFITS 3 bore sizes with 4 travel lengths available to fit variety of applications The price alternative to the PHD Series SD Slide Oversized guide shafts Travel adjustment collars in extend direction are standard Shock pads on extend and retract are provided to eliminate metal to metal contact at end of travel, reducing noise and shock Dowel pin holes and mounting threads in slide body for easy and accurate mounting Magnet on piston for position sensing Switch bundle option provides two switches and brackets utilizing proven PHD Series 175 switch technology, for simplified ordering at a lower price Component Body Tool Plate Rod Bushing Cylinder Tube Cylinder Cap ( 6) Cylinder Cap ( 2 & 4) Tierod and Nut Guide Shafts External Fasteners Stop Collars Piston Rod ( 6) Piston Rod ( 2 & 4) Rod Seal O-Rings Shock Pad Pressed In Ball Plugs Shaft Bearings Materials Anodized Aluminum Alloy Carbon Steel Stainless Steel NBR Polypropylene Polyurethane Polymer Composite steel travel adjustment collars on extend direction allow user to adjust slide travel PHD Series AV Cylinder components provide industry-proven reliability optional switches and brackets for position sensing internally lubricated polymer bearings provide smooth operation with minimum deflection and wear precision ground hardened guide shafts provide maximum rigidity with minimum deflection magnet on piston for externally mounted switches threaded and counterbored mounting holes in tool plate with dowel holes for precise attachment of tooling urethane shock pads on extend and retract directions provide vibrational damping and minimize impact forces (8)

22 ORDERING DATA Optimax OSD Slides MODEL NO. TYPE D = Oversize Shafts SIZE Bore 3/4" 1-1/8" 2" TRAVEL Travel Length 1", 2", 4", 8" 2", 4", 8", 1" 2", 4", 8", 1" OSD D 1-6 x 8 Contact PHD for other travel lengths SWITCH BUNDLE (OPTIONAL) - SA 2 DESIGN NO. 1 = Imperial Switch Circuitry N = DC Solid State NPN - Sink P = DC Solid State PNP - Source Cable Type K = Quick Connect 2 = 2 Meter Cable NOTES: 1) Includes 2 switches and 2 mounting brackets 2) Switch bundle available with actuator only Switch Brackets Slide Part Number Includes one bracket Solid State Switches Part Number Description Sink Type (NPN), 1-3 VDC w/6 ft [1.8 m] Cable Source Type (PNP), 1-3 VDC w/6 ft [1.8 m] Cable Sink Type (NPN), 1-3 VDC, Quick Connect Source Type (PNP), 1-3 VDC, Quick Connect Includes one switch Cordsets Model Number Cable Length in [2 m] in [5 m] Includes one cordset CAD & Sizing Assistance Use PHD's free online Product Sizing and CAD Configurator at (8)

23 ENGINEERING DATA Optimax OSD Slides Specifications Operating Air Pressure Operating Temperature Repeatability Velocity (Zero 1 psi [6.9 bar] Rated Life Lubrication Series OSD Slide 2 to 15 psi [1.4 to 1 bar] -2 to +18 F [-29 to +82 C] ±.1 inch [±.25 ] of original position 5 in/sec [1.3 m/sec] 3 million cycles Factory lubricated for rated life Guide Shaft Diameter Bore Diameter Travel Weight Adder Typical Dynamic Load Effective Area Base Weight in in Direction in 2 2 lb kg lb/in kg/ lb N Extend Retract Extend Retract Extend Retract DEFLECTION inches [] Weight lb [kg] 18.8 [8.5] 15 [6.8] 11.3 [5.1] 7.5 [3.4] 3.8 [1.7] SIZE 2 SIZE 4 SIZE 6.32 [.81].16 [.41].8 [.2].5 [.13].2 [.5] [25] [51] [76] [12] [127] [152] [178] [23] Travel in [] Weight lb [kg] 52.5 [23.8] 45 [2.4] 37.5 [17.] 3 [13.6] 22.5 [1.2] 15 [6.8] 7.5 [3.4] MAXIMUM ALLOWABLE KINETIC ENERGY Impact Velocity in/sec [m/sec] 35. [.89] 3. [.76] 25. [.64] 2. [.51] 15. [.38] 1. [.25] 5. [.13] [.2] [.5] [.7] [.9] [1.1] [1.4] [1.6] [1.8] [2.] [2.3] Total Moving Weight lb [kg] [51] [12] [152] [23] [254] Travel in [].64 [1.63].32 [.81].12 [.31].5 [.13].2 [.5] 35. [.89] 3. [.76] 25. [.64] 2. [.51] 15. [.38] 1. [.25] 5. [.13] [2.3] [4.5] [6.8] [9.1] [11.3] [13.6] [15.9] [18.1] [2.4] [22.7] Total Moving Weight lb [kg] Weight lb [kg] 135 [61.2] 12 [54.4] 15 [47.6] 9 [4.8] 75 [34.] 6 [27.2] 45 [2.4] 3 [13.6] 15 [6.8] [51] [12] [152] [23] [254] Travel in [] SIZE 2 SIZE 4 SIZE 6 Impact Velocity in/sec [m/sec] Impact Velocity in/sec [m/sec] 3. [.76] 25. [.64] 2. [.51] 15. [.38] 1. [.25] 5. [.13].32 [.81].12 [.31].5 [.13].2 [.5].1 [.3] [6.8] [13.6] [2.4][27.2] [34.] [4.8] [47.6] [54.4][61.2] [68.] [74.8] Total Moving Weight lb [kg] Sizing & Application Assistance Use PHD's free online Product Sizing Application or view the Product Sizing Catalog at: (8)

24 DIMENSIONS Optimax OSD Slides AB + TRAVEL 4X Y THREAD THRU FROM THIS SIDE C'BORED FROM OPPOSITE SIDE FOR Q SHCS O R S A B + TRAVEL U+TRAVEL HH ±.2 F1 2X BB PORT E D V SQ W F2 AA G CC ±.5 Ø FOR DOWEL PIN 2X IN TOOL PLATE 2X THRU Ø & C'BORE FOR DD SHCS X2 SHAFT Ø H L M CC ±.5 Ø FOR DOWEL PIN T EE A B D E F1 F2 G H L M O Q R S T U V W X2 Y #1 x.215 DP / /4 x.275 DP / /8 x.4 DP /2-13 AA AB BB CC DD EE HH /8 NPT.1884 x.25 MIN DP 1/ /8 NPT.259 x.31 MIN DP 3/ /4 NPT.3759 x.5 MIN DP 1/ CAD & Sizing Assistance Use PHD's free online Product Sizing and CAD Configurator at (8)

25 OSP Compact Pneumatic Thruster Slide The Price Alternative BENEFITS Port locations on top and side Standard shock pads reduce end of travel impact Magnets standard for switch sensing capability 8 bore sizes available in incremental travel lengths to fit a variety of applications Drop-in metric mounting matches global standard Component Body Rod Bushing Tool Plate Tool Plate Fasteners Snap Rings Guide Shafts Slide Bearings Piston Rod Bore Plug Rod Seal Shock Pad Piston Seal O-Rings Pressed In Ball Plugs Port Plugs Materials Anodized Aluminum Alloy Carbon Steel See Figure Above NBR Stainless Steel anodized aluminum body with integrated switch grooves NBR rod and piston seals steel tool plate steel tool plate fasteners bore plug: size 12 & 4-6 aluminum alloy size steel anodized aluminum piston rod bushing piston rod: size 12-2 stainless steel size steel with hard chrome plating slide bearings: size 12-4 bronze alloy size 5-63 PTFE and bronze alloy NOTE: Unit view depicts less than 3 of travel (8)

26 ORDERING DATA Optimax OSP Slides BUSHING TYPE C = Slide Bushing Bore in SIZE Area sq Area sq in MODEL NO. OSP C5-12 x 2 SWITCH BUNDLE (OPTIONAL) - SD K2 DESIGN NO. 5 = Metric STANDARD TRAVEL LENGTHS [] SWITCH CIRCUITRY D = DC Reed N = DC Solid State NPN - Sink P = DC Solid State PNP - Source NOTES: 1) Switch bundle option includes 2 switches 2) Switch bundle available with actuator only 3) Switches available in Quick Connect only 4) Magnets standard for switch sensing CABLE TYPE K = Quick Connect Cordsets Model Number Cable Length in [2 m] in [5 m] Includes one cordset. Switches Part Number Description Reed DC 5-3 V, 5 ma, Quick Connect Sink Type (NPN), DC 5-3 V, 5 ma, Quick Connect Source Type (PNP), DC 5-3 V, 5 ma, Quick Connect Includes one switch. CAD & Sizing Assistance Use PHD's free online Product Sizing and CAD Configurator at (8)

27 ENGINEERING DATA Optimax OSP Slides Specifications Operating Air Pressure Operating Temperature Velocity Rated Life Lubrication Series OSP Slide 1 to 1 bar [14.5 to 145 psi} 5 to 6 C [41 to 14 F] 5 to 5 /sec [2 to 2 in/sec] 3 million cycles Factory lubricated for rated life Rod Diameter Effective Area Base Unit Weight Adder per 5 Travel Body Thru & Counterbore Recoended Mounting Torques Bottom Body Threads Rear Body Threads Tool Plate Threads Direction 2 in 2 kg lb kg lb Nm in-lb Nm in-lb Nm in-lb Nm in-lb Extend Retract Extend Retract Extend Retract Extend Retract Extend Retract Extend Retract Extend Retract Extend Retract Maximum Lateral Load [kg] by Travel [] Weight of Moving Components [kg] by Travel [] NOTES: 1) Attached load must not exceed maximum kinetic energy. 2) Maximum loads given are positioned 5 from face of tool plate. Sizing & Application Assistance Use PHD's free online Product Sizing Application or view the Product Sizing Catalog at: (8)

28 ENGINEERING DATA Optimax OSP Slides MAXIMUM ALLOWABLE KINETIC ENERGY.6 12 Bore.6 16 Bore Total Moving Weight kg Total Moving Weight kg.6 2 Bore.6 25 Bore Total Moving Weight kg Total Moving Weight kg.6 32 Bore.6 4 Bore Total Moving Weight kg Total Moving Weight kg Bore Bore Total Moving Weight kg Total Moving Weight kg (8)

29 DIMENSIONS Optimax OSP Slides SIZES X NN THRU S Q DETAIL XX Z WA 4X C'BORE AND THRU FOR DD SHCS Ø DB 4X MM ML DP DETAIL XX L H R U X ±.2 T X Ø DA PW X ±.2 VA J K G Ø XE H7 XL DP FA FB GA 2X FF PORT C + TRAVEL B + TRAVEL GB E Ø XE H7 XL DP Ø XA H7 XB XL XC GC PA + TRAVEL 2X FF PORT PB Ø XA H7 DETAIL XX Ø XE H7 XL DP Z WA 4X YY YL DP X DETAIL XX WB X ±.2 B C DA DB DD FA FB FF G GA GB GC H J K L MM ML NN PA M4 8 5 M5 X (SEE NOTE 1) M4 x.7 1 M4 x M4 8 5 M5 X (SEE NOTE 2) M5 x.8 12 M5 x M5 1 6 G 1/ M5 x.8 13 M5 x M5 1 6 G 1/ M6 X M6 X M G 1/ M8 X M8 X PB PW Q R S T U VA X XA H7 XB XC XE H7 XL YL YY Z M5 X M5 x M6 X M6 X M8 X Notes: 1) for travel lengths = 19 or less, GB = 7.5 2) for travel lengths = 19 or less, GB = 9 3) All dimensions are MILLIMETERS CAD & Sizing Assistance Use PHD's free online Product Sizing and CAD Configurator at E WA WB travel travel travel All dimensions are reference only unless specifically toleranced. (8)

30 DIMENSIONS Optimax OSP Slides SIZES X NN THRU S Q 2X DETAIL ZZ Z WA 4X C'BORE AND THRU FOR DD SHCS Ø DB 4X MM ML DP 2X DETAIL ZZ L H R U X ±.2 T X Ø DA X ±.2 VB VA PW cc b a J G K FB FA GA 2X FF PORT C + TRAVEL B + TRAVEL GB E e d Ø XA H7 GC PA + TRAVEL 2X FF PORT XC PB XL XB Ø XA H7 DETAIL ZZ Z WA 4X YY YL DP X 2X DETAIL ZZ WB X ±.2 B C DA DB DD FA FB FF G GA GB GC H J K L MM ML NN PA M G 1/ M8 X M8 X M G 1/ M1 X M1 X M G 1/ M1 X M1 X PB PW Q R S T U VA X XA H7 XB XC XL YL YY Z M8 X M1 X M1 X VB a b cc d e Note: All dimensions are MILLIMETERS E WA WB travel travel travel All dimensions are reference only unless specifically toleranced. (8)

31 OSW Dual Bore Pneumatic Slide Table The Price Alternative BENEFITS Dual piston bores provide high power in compact spaces Standard shock pads reduce end of travel impact Magnets standard for switch sensing capability 6 bore sizes available in incremental travel lengths to fit a variety of applications Drop-in metric mounting matching global standard Stroke adjustments and shock absorbers available as kits cross roller bearing provides precise movement and excellent load carrying capabilities Component Body Tool Plate Rod Bushing Bore Plug Coupling Nut* Rod Coupling Piston Rod Rail Fasteners Tool Plate Fasteners Snap Rings** Rod Seal Shock Pad Piston Seal O-Rings Rail Materials Anodized Aluminum Alloy Copper Bronze Alloy Stainless Steel NBR Carbon Steel anodized aluminum tool plate NBR piston seal and bore plug seal aluminum alloy bore plug stainless steel retaining rings stainless steel tool plate fasteners stainless steel rod couplers anodized aluminum body with integrated switch grooves NBR rod seal and bushing seal anodized aluminum rod bushings * 6 and 8 only **Carbon steel size 6 only (8)

32 ORDERING DATA Optimax OSW Slides Bore in SIZE Area sq Area sq in MODEL NO. 5 OSW 12 - x 2 SWITCH BUNDLE (OPTIONAL) - SD K2 DESIGN NO. 5 = Metric STANDARD TRAVEL LENGTHS [] 1, 2, 3, 4, 5, 1, 2, 3, 4, 5, 75 1, 2, 3, 4, 5, 75, 1 1, 2, 3, 4, 5, 75, 1 1, 2, 3, 4, 5, 75, 1, 125, 15 1, 2, 3, 4, 5, 75, 1, 125, 15 Switch Circuitry D = DC Reed N = DC Solid State NPN - Sink P = DC Solid State PNP - Source NOTES: 1) Switch bundle option includes 2 switches 2) Switch bundle available with actuator only 3) Switches available in quick connect only 4) Magnets standard for switch sensing CABLE TYPE K = Quick Connect Cordsets Model Number Cable Length in [2 m] in [5 m] Includes one cordset. Switches Part Number Description Reed DC 5-3 V, 5 ma, Quick Connect Sink Type (NPN), DC 5-3 V, 5 ma, Quick Connect Source Type (PNP), DC 5-3 V, 5 ma, Quick Connect Includes one switch. CAD & Sizing Assistance Use PHD's free online Product Sizing and CAD Configurator at (8)

33 ENGINEERING DATA Optimax OSW Slides Specifications Operating Air Pressure Operating Temperature Velocity Rated Life Lubrication Series OSW Slide 1.5 to 7 bar [21.7 to 11 psi] 5 to 6 C [41 to 14 F] 5 to 5 /sec [2 to 2 in/sec] 3 million cycles Factory lubricated for rated life Rod Diameter Effective Area Unit Weight by Travel Direction 2 in 2 g oz g oz g oz g oz g oz g oz g oz g oz g oz Extend 57.9 Retract 42.7 Extend Retract Extend Retract Extend Retract Extend Retract Extend Retract Recoended Mounting Torques Body Thru & C bore Body Threads Tool Plate Threads Table Threads Nm in-lb Nm in-lb Nm in-lb Nm in-lb Sizing & Application Assistance Use PHD's free online Product Sizing Application or view the Product Sizing Catalog at: (8)

34 ENGINEERING DATA Optimax OSW Slides MAXIMUM ALLOWABLE KINETIC ENERGY.6 6 Bore.6 8 Bore Attached Load kg Attached Load kg.6 12 Bore.6 16 Bore Attached Load kg Attached Load kg.6 2 Bore.6 25 Bore Attached Load kg Attached Load kg Tool Plate Mounted Load Tool Plate Mounted Load with Shock Absorbers Table Mounted Load Table Mounted Load with Shock Absorbers Table Mounted Load Tool Plate Mounted Load Table Mounted Load with Shock Absorbers Tool Plate Mounted Load with Shock Absorbers (8)

35 DIMENSIONS Optimax OSW Slides 6 Bore 4X M2.5 x.45 x 3.5 DEEP N x M3 x.5 x 4 DEEP F A F SECTION A-A.5 A 3 H9 x 2.5 DEEP 4 Ø 3 H9 x 2.5 DEEP 1 2X M3 x.5 x 5 DEEP 2X M3 x.5 PORT M 5 K X M2.5 x.45 x 3 DEEP 6 2X M2.5 x.45 x 3 DEEP 5.5 J J2 Z ZZ GA 3 H9 x 2.5 DEEP 4 HA Ø 3 H9 x 2.5 DEEP 1 12 G H H H NN x M4 x.7 x 8 DEEP THIS SIDE C'BORE AND THRU FOR M3 SHCS OPPOSITE SIDE NOTES: 1) ALL DIMENSIONS ARE MILLIMETERS 2) DESIGNATED CENTERLINE IS CENTERLINE OF SLIDE HOUSING WIDTH 3) UNLESS OTHERWISE DIMENSIONED, DIMENSIONS ARE CENTERED ON DESIGNATED CENTERLINE 4) MAGNET ON PISTON STANDARD 5) SHOCK PAD ON EXTEND AND RETRACT STANDARD 6) SEE PAGE 9-41 FOR TRAVEL ADJUSTMENT AND SHOCK ABSORBER KITS Travel F G GA H HA J1 J2 K M N NN Z ZZ All dimensions are reference only unless specifically toleranced. (8)

36 DIMENSIONS Optimax OSW Slides 8 Bore A N x M3 x.5 x 4 DEEP F F SECTION A-A 4X M3 x.5 x 4 DEEP A 1 4 Ø 3 H9 3 H9 x 3 DEEP x 3 DEEP 3.8 M KA 3.8 K NA x M3 x.5 x 4 DEEP X M3 x.5 x 4 DEEP 2X M4 x.7 x 6 DEEP 6.5 2X M5 x.8 PORT J J Z ZZ Ø 3 H9 x 3 DEEP GA 3 H9 x 3 DEEP 4 HA 1 15 NOTES: 1) ALL DIMENSIONS ARE MILLIMETERS 2) DESIGNATED CENTERLINE IS CENTERLINE OF SLIDE HOUSING WIDTH 3) UNLESS OTHERWISE DIMENSIONED, DIMENSIONS ARE CENTERED ON DESIGNATED CENTERLINE 4) MAGNET ON PISTON STANDARD 5) SHOCK PAD ON EXTEND AND RETRACT STANDARD 6) SEE PAGE 9-41 FOR TRAVEL ADJUSTMENT AND SHOCK ABSORBER KITS G H H H H NN x M4 x.7 x 8 DEEP THIS SIDE C'BORE AND THRU FOR M3 SHCS OPPOSITE SIDE Travel F G GA H HA J1 J2 K KA M N NA NN Z ZZ All dimensions are reference only unless specifically toleranced. (8)

37 DIMENSIONS Optimax OSW Slides 12 Bore 17 1 A F N x M4 x.7 x 5.5 DEEP F SECTION A-A 4X M4 x.7 x 6 DEEP 1 A 1 4 H9 x Ø 4 H9 x 3.5 DEEP 3.5 DEEP X M5 X.8 X 8 DEEP M KA K 5 NA x M4 x.7 x 5 DEEP X M4 x.7 x 5 DEEP 5 1 2X M5 x.8 PORT J J2 Z ZZ GA Ø 4 H9 x 3.5 DEEP HA 5 Ø 4 H9 x 3.5 DEEP 1 2 G H H H H NOTES: 1) ALL DIMENSIONS ARE MILLIMETERS 2) DESIGNATED CENTERLINE IS CENTERLINE OF SLIDE HOUSING WIDTH 3) UNLESS OTHERWISE DIMENSIONED, DIMENSIONS ARE CENTERED ON DESIGNATED CENTERLINE 4) MAGNET ON PISTON STANDARD 5) SHOCK PAD ON EXTEND AND RETRACT STANDARD 6) SEE PAGE 9-41 FOR TRAVEL ADJUSTMENT AND SHOCK ABSORBER KITS NN x M5 x.8 x 1 DEEP THIS SIDE C'BORE AND THRU FOR M4 SHCS OPPOSITE SIDE Travel F G GA H HA J1 J2 K KA M N NA NN Z ZZ All dimensions are reference only unless specifically toleranced. (8)

38 DIMENSIONS Optimax OSW Slides 16 Bore 24 1 A F N x M5 x.8 x 6 DEEP F X M5 x.8 x 7 DEEP SECTION A-A 1 A 1 5 H9 Ø 5 H9 x 4 DEEP x 4 DEEP 6 2 2X M6 x 1. x 1 DEEP M KA K NA x M5 x.8 x 5.5 DEEP X M5 x.8 x 5.5 DEEP 12. 2X M5 x.8 PORT J J2 Z ZZ GA HA 6 5 H9 x 4 DEEP Ø 5 H9 x 4 DEEP 1 26 G H H H H NOTES: 1) ALL DIMENSIONS ARE MILLIMETERS 2) DESIGNATED CENTERLINE IS CENTERLINE OF SLIDE HOUSING WIDTH 3) UNLESS OTHERWISE DIMENSIONED, DIMENSIONS ARE CENTERED ON DESIGNATED CENTERLINE 4) MAGNET ON PISTON STANDARD 5) SHOCK PAD ON EXTEND AND RETRACT STANDARD 6) SEE PAGE 9-41 FOR TRAVEL ADJUSTMENT AND SHOCK ABSORBER KITS NN x M6 x 1 x 12 DEEP THIS SIDE C'BORE AND THRU FOR M5 SHCS OPPOSITE SIDE Travel F G GA H HA J1 J2 K KA M N NA NN Z ZZ All dimensions are reference only unless specifically toleranced. (8)

39 DIMENSIONS Optimax OSW Slides 2 Bore A F N x M5 x.8 F F x 1 DEEP FF X M5 x.8 x 8 DEEP SECTION A-A 2 A 2 5 H9 x Ø 5 H9 x 5 DEEP 5 DEEP X M6 x 1. x 13 DEEP M KA K 12 NA x M6 x 1. x 6.5 DEEP X M6 x 1. x 6.5 DEEP 2X 1/8 G PORT J1 15 Z ZZ J GA 5 H9 x 5 DEEP 6 HA Ø 5 H9 x 5 DEEP G H H H H H H NN x M6 x 1 x 12 DEEP THIS SIDE C'BORE AND THRU FOR M5 SHCS OPPOSITE SIDE NOTES: 1) ALL DIMENSIONS ARE MILLIMETERS 2) DESIGNATED CENTERLINE IS CENTERLINE OF SLIDE HOUSING WIDTH 3) UNLESS OTHERWISE DIMENSIONED, DIMENSIONS ARE CENTERED ON DESIGNATED CENTERLINE 4) MAGNET ON PISTON STANDARD 5) SHOCK PAD ON EXTEND AND RETRACT STANDARD 6) SEE PAGE 9-41 FOR TRAVEL ADJUSTMENT AND SHOCK ABSORBER KITS Travel F FF G GA H HA J1 J2 K KA M N NA NN Z ZZ All dimensions are reference only unless specifically toleranced. (8)

40 DIMENSIONS Optimax OSW Slides 25 Bore A F F F N x M6 x 1. x 13 DEEP FF X M6 x 1. x 1 DEEP SECTION A-A 2.5 A H9 x 6 DEEP Ø 6 H9 x 6 DEEP 31 2X M8 x 1.25 x 15 DEEP M KA K NA x M8 x 1.25 x 8.5 DEEP X M8 x 1.25 x 8.5 DEEP 2X 1/8 G PORT J1 18 Z J2 ZZ GA 6 H9 x 6 DEEP 7 HA Ø 6 H9 x 6 DEEP 2 38 G H H H H H H NN x M8 x 1.25 x 16 DEEP THIS SIDE C'BORE AND THRU FOR M6 SHCS OPPOSITE SIDE NOTES: 1) ALL DIMENSIONS ARE MILLIMETERS 2) DESIGNATED CENTERLINE IS CENTERLINE OF SLIDE HOUSING WIDTH 3) UNLESS OTHERWISE DIMENSIONED, DIMENSIONS ARE CENTERED ON DESIGNATED CENTERLINE 4) MAGNET ON PISTON STANDARD 5) SHOCK PAD ON EXTEND AND RETRACT STANDARD 6) SEE PAGE 9-41 FOR TRAVEL ADJUSTMENT AND SHOCK ABSORBER KITS Travel F FF G GA H HA J1 J2 K KA M N NA NN Z ZZ All dimensions are reference only unless specifically toleranced. (8)

41 KITS SHOCK ABSORBER KIT Shock Absorber Kit Base Part Number 16 Slide Bore 8 = 8 12 = = 16 2 = 2 25 = 25 Optimax OSW Slides Replacement Shock Part Number RETRACT SHOCK ABSORBER EXTEND SHOCK ABSORBER Max Energy per Cycle Nm Max Energy per Hour Nm B C D A STOP BLOCK E Dimension D by Travel Length F H NoteS: 1) ALL DIMENSIONS ARE MILLIMETERS 2) EACH SHOCK KIT INCLUDES 2 TABLE MOUNTED STOP BLOCKS. SHORTER TRAVEL SLIDES WILL USE ONLY 1 STOP BLOCK. PHD RECOMMENDS REPLACING SHOCKS EVERY 1.2 MILLION CYCLES. 3) Shocks/shock kits not available on size 6 G A B C E F G H STROKE ADJUSTMENT KIT A Stroke Adjustment Kit Base Part Number Slide Bore 6 = 6 8 = 8 12 = = 16 2 = 2 25 = 25 Adjustment Amount Blank = 5 15 = = 25 B 5 TRAVEL ADJUSTMENT 15 TRAVEL ADJUSTMENT 25 TRAVEL ADJUSTMENT D25 D15 C D D15 D25 A B C D D15 D25 E F G D E F Note: ALL DIMENSIONS ARE MILLIMETERS G All dimensions are reference only unless specifically toleranced. (8)

42 (8)

43 OSH Compact Pneumatic Slide Table The Price Alternative BENEFITS Multiple port locations for application flexibility Four bore sizes available in incremental travel lengths to fit a variety of applications Drop-in metric mounting matching global standard Standard shock pads reduce end of travel impact Standard magnets for switch sensing capability Proven Optimax performance at a competitive price Component Body Tool Plate Rod Bushing Bore Plug Snap Ring Rod Coupling Rod Seal Shock Pad Piston Seal O-rings Piston Rod Rail Rail Fasteners Tool Plate Fasteners Pressed in Ball Plugs Port Plugs Materials Anodized Aluminum Alloy Carbon Steel Brass NBR Stainless Steel one piece anodized aluminum tool plate rail bearing technology provides excellent load carrying ability shock pads standard to absorb end of travel energy impact size 6 & 1 threaded bore plug size 16 & 2 bore plug with snap ring size 6 & 1 dual piston seals size 16 & 2 single piston seal 2 switch slots per side standard magnet for externally mounted switches three port locations: this side, opposite side, and rear face (8) anodized aluminum body with integral switch slots 9-43

44 ORDERING DATA Optimax OSH Slides Bore in SIZE Area sq Area sq in MODEL NO. 5 OSH 1 - x 2 SWITCH BUNDLE (OPTIONAL) - SD K2 DESIGN NO. 5 = Metric STANDARD TRAVEL LENGTHS [] 5,1, 15, 2, 25, 3, 4, 5, 6 5,1, 15, 2, 25, 3, 4, 5, 6 5,1, 15, 2, 25, 3, 4, 5, 6 5,1, 15, 2, 25, 3, 4, 5, 6 Switch Circuitry D = DC Reed N = DC Solid State NPN - Sink P = DC Solid State PNP - Source NOTES: 1) Switch bundle option includes 2 switches 2) Switch bundle available with actuator only 3) Switches available in quick connect only 4) Magnets standard for switch sensing CABLE TYPE K = Quick Connect Cordsets Model Number Cable Length in [2 m] in [5 m] Includes one cordset. Switches Part Number Description Reed DC 5-3 V, 5 ma, Quick Connect Sink Type (NPN), DC 5-3 V, 5 ma, Quick Connect Source Type (PNP), DC 5-3 V, 5 ma, Quick Connect Includes one switch. CAD & Sizing Assistance Use PHD's free online Product Sizing and CAD Configurator at (8)

45 ENGINEERING DATA Optimax OSH Slides Series OSH Slide Specifications 6 1 & 16 2 Operating Air Pressure 1.2 to 7 bar [18 to 11 psi].6 to 7 bar [9 to 11 psi].5 to 7 bar [7.5 to 11 psi] Operating Temperature 5 to 6 C [41 to 14 F] Velocity 5 to 5 /sec [2 to 2 in/sec] Rated Life 3 million cycles Lubrication Factory lubricated for rated life Rod Unit Weight by Travel Effective Area Diameter Direction 2 in 2 g oz g oz g oz g oz g oz g oz g oz g oz g oz 6 3 Extend Retract Extend Retract 66.1 Extend Retract Extend Retract Lateral Body Thru and Counterbore Recoended Mounting Torques Lateral Body Threads Rear and Bottom Body Threads Tool Plate and Table Threads Nm in-lb Nm in-lb Nm in-lb Nm in-lb Sizing & Application Assistance Use PHD's free online Product Sizing Application or view the Product Sizing Catalog at: (8)

46 ENGINEERING DATA Optimax OSH Slides MAXIMUM ALLOWABLE KINETIC ENERGY.6 6 Bore.6 1 Bore Attached Load kg Attached Load kg.6 16 Bore.6 2 Bore Attached Load kg Attached Load kg Max Pitch Moment Max Yaw Moment Max Roll Moment Nm Nm Nm X X X Pitch Moment Yaw Moment Roll Moment (8)

47 DIMENSIONS Optimax OSH Slides 4X E x F1 DEEP B4 B2 B3 B5 A1 A2 B1 B5 R5 C2 C4 K1 L1 L2 L3 L4 N x E x F2 DEEP 3X H THRU 3X Ø FOR J SHCS THIS SIDE 3X Ø FOR J SHCS OPPOSITE SIDE M5 x.8 x 4 DP PORT 2X THIS SIDE PLUGGED 2X OPPOSITE SIDE PLUGGED P1 P2 C3 C1 P3 R4 R3 R2 + TRAVEL R1 + TRAVEL K3 K2 + TRAVEL 4X E x F3 DEEP GUIDE RAIL WIDTH G 4X E x F3 DEEP D2 D3 D1 P4 P5 2X M5 x.8 x 4 DP PORT (8)

48 DIMENSIONS Optimax OSH Slides 9-48 Model Travel A1 A2 B1 B2 B3 B4 B5 C1 C2 C3 C4 D1 D2 D3 E F1 F2 F3 G H J K1 K2 K3 L1 L2 L3 L4 R1 R2 R3 R4 R5 N P1 P2 P3 P4 P M3 x M4 x M OSW M4 x M5 x M OSW M M4 x (8) OSW M5 x M5 x M6 x M OSW5-2 All dimensions are reference only unless specifically toleranced. All dimensions are.

49 OCQ Pneumatic Compact Cylinders The Price Alternative BENEFITS Standard shock pads reduce end of travel impact Ten bore sizes available in incremental stroke lengths Standard magnets for switch sensing capability Drop-in metric mounting matching global standard Proven Optimax performance at a competitive price Component Body Bore Plug Snap Ring Piston Rod Rod Bushing Rod Seal Shock Pads Piston Seal O-rings Piston Wear Ring* * 32 thru 1 only Materials Anodized Aluminum Alloy See Figure NBR PTFE snap ring stainless steel size spring steel size 4-1 piston rod stainless steel size chrome-plated steel size 32-1 rod bushing hard anodize aluminum size anodized aluminum with PTFE/bronze bearing alloy size 4-1 integrated switch slots magnet on piston for externally mounted switches (8)

Optimized for OEM requirements at a lower price.

Optimized for OEM requirements at a lower price. The Price Alternative Optimized for OEM requirements at a lower price. Series OSH Compact Pneumatic Slide Table - 4 s, Incremental Travels Series ORQ Compact Rotary Table - 6 s Series OCV Pneumatic ISO

More information

Series OCG Pneumatic Cylinders

Series OCG Pneumatic Cylinders New Models The Price Alternative Series OCG Pneumatic Cylinders www.phdinc.com (8) 624-811 and Rebuildable round body cylinders 6 bore sizes standard stroke lengths High speed/double acting OCG2 ORDERING

More information

Series OCG Pneumatic Cylinders

Series OCG Pneumatic Cylinders The Price Alternative Series OCG Pneumatic Cylinders Repairable round body cylinders 6 bore sizes 1 standard stroke lengths High speed/double acting www.phdinc.com (8) 624-811 OCG1 ORDERING DATA DESIGN

More information

Series OCQ Pneumatic Compact Cylinders

Series OCQ Pneumatic Compact Cylinders The Price Alternative Series OCQ Pneumatic Compact Cylinders Ten bore sizes available in incremental stroke lengths Standard shock pads reduce end of travel impact Standard magnets for switch sensing capability

More information

AIR CYLINDER Series A12, A13

AIR CYLINDER Series A12, A13 A12 - Non magnetic A13 - Magnetic S Double Acting ( Ø32-100 ) mm As per ISO 6431 / CETOP RP43P, RP53P standards Features Adjustable cushioning at both ends Wide varieties of mountings Low friction Long

More information

SERIES BCS STRETCH ROD CYLINDERS

SERIES BCS STRETCH ROD CYLINDERS BCS y Q ua lit Support SOLUTIONS for the Plastic Bottle Blowing Industry DIRECT REPLACEMENT FOR SIDEL SERIES AND SERIES MACHINES P U O C PACK TI A S y er iv el D ENTS GR N O G COM P IN G SERIES BCS STRETCH

More information

PNEUMATIC 180 ANGULAR GRIPPER

PNEUMATIC 180 ANGULAR GRIPPER PNEUMATIC 180 ANGULAR GRIPPER Major Benefits Jaws rotate completely clear of work area eliminating an otherwise required axis of travel Three standard jaw rotations available: 60, 90, and 180 One piece

More information

AIR CYLINDER Series A23, A24

AIR CYLINDER Series A23, A24 A23 - Magnetic A24 - Non-magnetic Double Acting s (Square type) Ø32-125 mm As per ISO 15552 / VDMA 24562 standards. Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings

More information

Aluminium tube and profile

Aluminium tube and profile > Series 63 cylinders CATALOGUE > 206 Series 63 cylinders - Aluminium tube and profile New Single and double-acting, magnetic, cushioned Versions: standard, low friction, high and low temperatures ø 32,

More information

Electric Slide Solutions

Electric Slide Solutions Electric Slide Solutions Series ESCV Electric Thruster Slide Designed for vertical or non-rotating applications Built on the field proven Series SCV, the electric version offers many of the same benefits

More information

ASP Series Steel Body NFPA Cylinder Line

ASP Series Steel Body NFPA Cylinder Line Series Steel Body NFPA Cylinder Line www.numatics.com Table of Contents Series Features and Benefits 3 Standard Mounts 4 How to Order 5 Port Size Availability 6 Dimensions 7-34 Rod Ends 7 Large Bore 8

More information

SERIES PA SWING ARM CLAMPS for the Automotive Industry

SERIES PA SWING ARM CLAMPS for the Automotive Industry Pa SERIES PA SWING ARM CLAMPS for the Automotive Industry Ideal for a wide variety of automated part holding and transfer applications Copper Arm Switches Installed ORDERING DATA: SERIES PA CLAMPS INDEX:

More information

Bimba Extruded Linear Thrusters 2X FF X EE DP 2X DD 2X Ø DD X EE DP U V W X Y Z R S Dimensions - ET T B 4X TAP AA THRU Ø BB C BORE X CC DP (OPP.SIDE)

Bimba Extruded Linear Thrusters 2X FF X EE DP 2X DD 2X Ø DD X EE DP U V W X Y Z R S Dimensions - ET T B 4X TAP AA THRU Ø BB C BORE X CC DP (OPP.SIDE) Bimba Extruded Linear Thrusters Engineering Specifications Maximum Operating Pressure 140 psi (10 bar) Temperature Range 15 to 160 degrees F (-10 to 70 degrees C) Expected Service Life 1,500 miles (with

More information

Linear Thrusters/PneuMoment

Linear Thrusters/PneuMoment /PneuMoment Extruded TE Series 3.3-3.10 3.11-3.16 T Series Multiple Position T4 Series Movable Housing 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 Pneu-Moment Checklist PneuMoment Pneumatic Actuators PneuMoment

More information

AIR CYLINDER Series A25, A26

AIR CYLINDER Series A25, A26 A25 - Magnetic A26 - Non-magnetic S Double End Double Acting - Ø32-100 mm As per ISO 15552 / VDMA 24562 standards Features Adjustable cushioning at both ends with elastomer pads Wide varieties of mountings.

More information

WST Stopper Cylinder. Series WST. Specifications. How to adjust the shock absorber. Precautions. Shock absorber replacement

WST Stopper Cylinder. Series WST. Specifications. How to adjust the shock absorber. Precautions. Shock absorber replacement WST Stopper Cylinder Specifications Features Media Clean dry compressed air Operating Pressure Range 22 to 102 psi (1.5 to 7 Bar) Max* Pressure 145 psi (10 Bar) Operating Temperature Range 32 to 140 F

More information

Linear Thrusters/PneuMoment

Linear Thrusters/PneuMoment /PneuMoment Extruded TE Series (Composite Bearings) 3.3-3.10 3.11-3.16 T Series Multiple Position T4 Series Movable Housing 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 Pneu-Moment Checklist PneuMoment Pneumatic

More information

DIRECT REPLACEMENTS. phdinc.com (800) INCREASE PRODUCTION REDUCE MAINTENANCE REDUCE DOWNTIME REDUCE SCRAP STRETCHING CYLINDERS

DIRECT REPLACEMENTS. phdinc.com (800) INCREASE PRODUCTION REDUCE MAINTENANCE REDUCE DOWNTIME REDUCE SCRAP STRETCHING CYLINDERS SOLUTIONS A BLOW division MOLDING SOLUTIONS of PHD P Quality SIDEL Support Delivery PLASTIC PACKAGING COMPONENTS P ASTIC PACKAGING COMPONENTS GRO DIRECT REPLACEMENTS phdinc.com (800) 624-8511 INCREASE

More information

1.20 L INEAR ACTUATOR: AIR CYLINDER SERIES CG1

1.20 L INEAR ACTUATOR: AIR CYLINDER SERIES CG1 1.20 L INEAR ACTUATOR: AIR CYLINDER A IR CYLINDER BORE SIZES Ø20~100MM Double acting Clean line A substantial reduction in overall length compared to tie bar designed cylinders High velocity Magnetic piston

More information

L INEAR ACTUATORS: AIR CYLINDERS SERIES C Bar. Carbon steel Hard chrome finish Ø20, Ø25 bores only ORDER LINES

L INEAR ACTUATORS: AIR CYLINDERS SERIES C Bar. Carbon steel Hard chrome finish Ø20, Ø25 bores only ORDER LINES 1-45 A IR CYLINDER BORE SIZES: Ø8, 10, 12, 16, 20, 25 Conforms to CETOP RP52P and ISO 6432 standards Double or single acting models High speed actuation Auto switch sensing optional Special shaped rod

More information

Linear Thrusters/PneuMoment

Linear Thrusters/PneuMoment /PneuMoment Extruded 3.3-3.10 TE Series 3.11-3.16 T Series 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 PneuMoment Pneumatic Actuators PneuMoment Application 3.33 3.34-3.48 3.49 Bimba 304 stainless steel body

More information

Four Shaft Linear Thrusters

Four Shaft Linear Thrusters Four Shaft Linear Thrusters FOUR SHAFT THRUSTERS Three Models with bores from 2 to 4 Twice the load capacity of comparable two shaft units Reduced deflection and bearing play Compact, light weight robust

More information

Linear Thrusters/PneuMoment

Linear Thrusters/PneuMoment /PneuMoment Extruded 3.3-3.10 TE Series 3.11-3.16 T Series 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 PneuMoment Pneumatic Actuators PneuMoment Application 3.33 3.34-3.48 3.49 Pneu-Moment Bimba Pneu-Moment

More information

GRB. long life Compact Angular gripper SHIPS IN 1-2 days. Major Benefits. Industry Uses

GRB. long life Compact Angular gripper SHIPS IN 1-2 days. Major Benefits. Industry Uses long life Compact Angular gripper SHIPS IN 1-2 days hardened steel jaws have robust design and include dowel holes for precise tooling location steel cover, jaw design, and tight jaw slots minimize external

More information

SERIES SFP SLIDES INFORMATION SHEET. Ordering Data. U.S. Patent No. 6,857,780 International Patent No. CA PART NO.

SERIES SFP SLIDES INFORMATION SHEET. Ordering Data. U.S. Patent No. 6,857,780 International Patent No. CA PART NO. Ordering Data SERIES SFP SLIDES INFORMATION SHEET IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with slide installation and setup. File with maintenance or machine documentation.

More information

VERTICAL THRUSTER PNEUMATIC SLIDE

VERTICAL THRUSTER PNEUMATIC SLIDE ERTIAL TRUSTER PNEUMATI SLIDE Major Benefits Oversize guide rods Simple design Ideal for non-rotating applications Easy tooling mounting to tool plate bore sizes Units are powered by PD s rugged Series

More information

GRA GRV SERIES GRA PARALLEL GRIPPERS SERIES GRV ANGULAR GRIPPERS. Compact Precision Grippers Ideal for a Wide Range of Applications

GRA GRV SERIES GRA PARALLEL GRIPPERS SERIES GRV ANGULAR GRIPPERS. Compact Precision Grippers Ideal for a Wide Range of Applications GRA GRV SERIES GRA PARALLEL GRIPPERS SERIES GRV ANGULAR GRIPPERS Compact Precision Grippers Ideal for a Wide Range of Applications Series GRA Parallel Series GRV Angular GRAV0 ORDERING DATA: SERIES GRA

More information

Aluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40%

Aluminium profile. TANDEM: Double thrust and traction forces. LOW FRICTION: Friction force reduced by over 40% CATALOGUE > Release 8.7 > Series 6 cylinders Series 6 cylinders - Aluminium profile Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40,

More information

Parallel long travel pneumatic gripper

Parallel long travel pneumatic gripper Parallel long travel pneumatic gripper Major Benefits Compact, low profile design with long jaw travel and large moment capacities Total jaw travels up to 125 mm (4.921 in) allows for larger parts, encapsulated

More information

Extruded Body Cylinders, ISO 6431, ISO compliant Series 61

Extruded Body Cylinders, ISO 6431, ISO compliant Series 61 1 ISO / VDMA Cylinders NORTH AMERICAN CYLINDER & ACTUATOR CATALOG > Release 8.5 Extruded Body Cylinders, ISO 6431, ISO 15552 compliant Series 61 Single or double-acting, magnetic, cushioned Standard and

More information

FULL COLOR TAB #1 TA 7

FULL COLOR TAB #1 TA 7 FULL COLOR TAB #1 TA 7 TA - How to Order Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.00 to improve bearing surface alignment. SERIES TA (NFPA) CYLINDER Reduces cylinder

More information

AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS... 6

AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS... 6 AS/ASH SERIES ALUMINUM PNEUMATIC AND HYDRAULIC CYLINDERS............. 6 Section 6 8 ORDERING INFORMATION For Rod End Dimensions see back cover foldout... Basic Cylinder No Mount.0" to 4.00" For pressure

More information

Series 63 ISO cylinders

Series 63 ISO cylinders Series 63 ISO 15552 cylinders New versions Single and double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with the ISO 15552 standard Weight reduced by 25% Low noise More

More information

Tie rod cylinders, Series 523

Tie rod cylinders, Series 523 Electric Drives and Controls Hydralics Linear Motion and Assembly Technologies Pneumatics Service Tie rod cylinders, Series 523 Technical data Tie rod cylinders, Series 523 Grey series, 32 25 mm ( /4"-5")

More information

Bore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2

Bore ø 32, 40, 50, 63, 80, 100, 125 Ports 32 = 1/8, 40/50 = 1/4, 63/80 = 3/8, 100/125 = 1/2 6 S E R I E S Cylinders Series 6 Catalog 2006 Single, double acting, magnetic (DIN/ISO 643) Bore: ø 32, 40, 50, 63, 80, 00, 25 cushioned [ /4, 9/6, 2, 2 /2, 3 /8, 4, 5 inch approximations] The Series 6

More information

Tie-rod Cylinders, ISO 6431, ISO compliant Series 60

Tie-rod Cylinders, ISO 6431, ISO compliant Series 60 Tie-rod Cylinders, ISO 6431, ISO 15552 compliant Series 60 Single or double-acting, magnetic, cushioned Standard and low friction versions ø 32, 40, 50, 63, 80, 100, 125 mm In compliance with ISO 15552

More information

Series 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm

Series 6PF Positioning Feedback cylinders 1/ Double-acting low friction, magnetic ø 50, 63, 80, 100, 125 mm CATALOGUE > Release 8.8 > Series 6PF cylinders Series 6PF Positioning Feedback cylinders Double-acting low friction, magnetic ø 50, 63, 80, 00, 25 mm»» In compliance with ISO 5552 standards and with the

More information

Tie rods cylinders to ISO standard

Tie rods cylinders to ISO standard Tie rods cylinders to ISO 5552 standard seriescpui DESCRIPTION Cylinders series CPUI comply with ISO 5552 standard, being in this way completely interchangeable with the well-known cylinders to ISO 643

More information

Cylinders Series 61 - Aluminium profile

Cylinders Series 61 - Aluminium profile CATALOGUE > Release 8. Cylinders Series 6 - Aluminium profile MOVEMENT > Cylinders Series 6 Single, double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00, 25 (ISO 5552)» ISO 5552 (corresponding to

More information

Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm

Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 100, 125mm CATALOGUE > Release 8.8 > Series 60 cylinders Series 60 cylinders Single and double-acting, magnetic, cushioned Standard, low friction, low temperatures and tandem versions ø 32, 40, 50, 63, 80, 00, 25mm»»

More information

PNEUMATIC CYLINDERS CYLINDERS ISO solutions SERIES 21 SERIES 21 CYLINDERS ISO 15552

PNEUMATIC CYLINDERS CYLINDERS ISO solutions SERIES 21 SERIES 21 CYLINDERS ISO 15552 PNEUMATIC CYLINDERS 1 2 3 4 SERIEs 21- General Information 32-100 mm diameter 21 series cylinders are manufactured to ISO 15552 standard which specifies interchangeable mounting dimensions. The cylinder

More information

Series MGPS. Compact Guide Cylinder: ø50, ø80 MGP S Z73. How to Order. Applicable auto switches. Compact Guide Cylinder.

Series MGPS. Compact Guide Cylinder: ø50, ø80 MGP S Z73. How to Order. Applicable auto switches. Compact Guide Cylinder. Compact Guide Cylinder: Series S ø, Compact Guide Cylinder Compact guide cylinder Heavy duty guide rod type S Z73 mm mm How to Order Number of auto switches Nil S 2 pcs. 1 pc. Auto switch type Nil Without

More information

Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm

Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 100, 125mm CATALOGUE > Release 8.6 > Series 60 cylinders Series 60 cylinders New version Single and double-acting, magnetic, cushioned Standard, low friction and low temperature versions ø 32, 40, 50, 63, 80, 00,

More information

AIR CYLINDER Series A75, A76

AIR CYLINDER Series A75, A76 A76 - n-magnetic A75 - Magnetic AIR CYLINDER Round s - Ø32, 40, 50 and 63 mm Double Acting with Adjustable Cushioning Features Available in magnetic and n magnetic version Adjustable cushioning at both

More information

Pneumatic cylinders, piston-ø mm Double acting with magnetic piston DIN ISO 15552

Pneumatic cylinders, piston-ø mm Double acting with magnetic piston DIN ISO 15552 Pneumatic cylinders, piston-ø 32 100 mm Double acting with magnetic piston DIN ISO 15552 Technical data for series SL 050 450 Order code SL-032-0250-050 Series Piston-Ø Stroke length (mm) Type of cylinder

More information

Series CP95. Profile Design ISO/VDMA Air Cylinder. Increased kinetic energy absorption. Improved end of stroke cushion capacity

Series CP95. Profile Design ISO/VDMA Air Cylinder. Increased kinetic energy absorption. Improved end of stroke cushion capacity Profile Design ISO/VDMA Air Cylinder Series CP95 Improved end of stroke cushion capacity Piston rod lurching has been eliminated at the end of stroke positions by means of a floating seal mechanism. Increased

More information

Linear Thrusters/PneuMoment

Linear Thrusters/PneuMoment /PneuMoment Extruded 3.3-3.10 TE Series (Composite Bearings) 3.11-3.16 T Series (Ball Bearings) 3.17-3.22 Multiple Position 3.23-3.24 NEW T4 Series 3.25-3.28 Checklist 3.29 PneuMomentPneumatic Actuators

More information

P1Z Series. Magnetically Coupled Rodless Air Cylinders Contents

P1Z Series. Magnetically Coupled Rodless Air Cylinders Contents Magnetically Coupled Rodless Air Cylinders Contents Basic Version Features... 15 Ordering Information... 151 Specifications... 152 Technical Data... 153 Dimensions... 154 Mountings... 155 uided Version

More information

Series ICS and ICL Pneumatic Cylinders. Corrosion resistant stainless steel and aluminum cylinders

Series ICS and ICL Pneumatic Cylinders. Corrosion resistant stainless steel and aluminum cylinders Series ICS and ICL Pneumatic Cylinders Corrosion resistant stainless steel and aluminum cylinders Series ICS and ICL cylinders New generation of stainless steel and clean line cylinders. Series ICS from

More information

KRONES DIRECT REPLACEMENTS

KRONES DIRECT REPLACEMENTS PLASTIC PACKAGING COMPONENTS GRO Quality Support Delivery SOLUTIONS A BLOW division MOLDING SOLUTIONS of PHD PLASTIC PACKAGING COMPONENTS P KRONES DIRECT REPLACEMENTS phdinc.com (800) 624-8511 INCREASE

More information

High Performance Repairable Pneumatic Cylinder Parker Hannifin Corporation

High Performance Repairable Pneumatic Cylinder Parker Hannifin Corporation High Performance Repairable Pneumatic Cylinder 219 Pneumatic ivision eatures Optional Piston Magnet Located under wear band, piston magnet is used for through-thebarrel sensors for electronic piston position

More information

Extruded Thrusters. Brochure

Extruded Thrusters. Brochure Extruded Thrusters Brochure Chrome plated stainless steel guide shafts optimize bearing performance Mounting flexibility: Through & C-bore Tapped bottom Tapped rear Bottom T-slots Bronze bushing for heavy

More information

1.134 L INEAR A CTUATOR: AIR C YLINDER S ERIES C95

1.134 L INEAR A CTUATOR: AIR C YLINDER S ERIES C95 1.134 L INEAR A CTUATOR: AIR C YLINDER H O W M ADE I N USA T ECHNICAL T O O R D E R C95 AIR C YLINDERS C95 P ISTON R OD S Basic K Non-Rotating P ISTON - Basic D Magnetic B ORE IN MM 50 63 80 100 B S T

More information

NFPA Double acting imperial cylinders

NFPA Double acting imperial cylinders > > Ø 4... 8 > > Adjustable captive cushion needle > > Constructed of the finest materials > > Magnetic piston standard > > Wide temperature range > > Shock and vibration tested to N 61373, Category 1,

More information

Aluminium profile. Double-acting, cushioned, magnetic ø mm

Aluminium profile. Double-acting, cushioned, magnetic ø mm > Series 4 cylinders Series 4 cylinders - Aluminium profile Double-acting, cushioned, magnetic ø 60-200 mm»» In compliance with ISO 643/ VDMA 24562 standards»» Rolled stainless steel rod»» Adjustable pneumatic

More information

SERIES TA (NFPA) CYLINDER

SERIES TA (NFPA) CYLINDER Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.00, improving bearing surface alignment. SERIES (NFPA) CYLINDER Reduces cylinder drag and erractic operation Reduces cylinder

More information

Features. How to Order ACS3. Max. Temperature Without bellows J Nylon Tarpaulin 60 K Neoprene Cloth 110. Material ACM ACMW. 7 Rod end attachment

Features. How to Order ACS3. Max. Temperature Without bellows J Nylon Tarpaulin 60 K Neoprene Cloth 110. Material ACM ACMW. 7 Rod end attachment Symbol -N B80-S100 Features With built-in magnet. (Standard) With non-lubricated seal. Improved cushion ring and special seal increase the absorbable kinetic energy. Cushion needle avoid detachment. Double

More information

HEAVY DUTY PNEUMATIC CYLINDERS

HEAVY DUTY PNEUMATIC CYLINDERS HEAVY DUTY PNEUMATIC CYLINDES Features: Conforms to ISO:30 standard. Double Acting, with adj. cushioning at both ends. Sizes: Ø, Ø, Ø, Ø, Ø, Ø0, Ø1, Ø0, Ø0 & Ø0. : Other bore sizes on request Seamless

More information

Compact cylinders series NYD Double acting with magnetic piston, ISO M5 to G1/8 Piston Ø 20 to 100 mm

Compact cylinders series NYD Double acting with magnetic piston, ISO M5 to G1/8 Piston Ø 20 to 100 mm Compact cylinders series NYD Double acting with magnetic piston, ISO 21287 M5 to G1/8 Piston Ø 20 to 100 mm 200, 210 220 600, 610 620 Order code NYD-032-125-210 High force cylinder series NYDK and multiple

More information

P1X Series. Compact Rodless Air Cylinders Contents

P1X Series. Compact Rodless Air Cylinders Contents Compact DL RC P1Z P1X OSP-P Contents Features and Benefits... 130 Ordering Information... 131 Specifications, Weights and Forces... 132 Technical Data... 133-136 Sensor Adapter Bracket... 137 Basic Dimensions...

More information

Sizes 32, 40, 50 and 63

Sizes 32, 40, 50 and 63 > Series 6E electromechanical cylinders C_Electrics > 207 Series 6E electromechanical cylinders Sizes 32, 40, 50 and 63 The Series 6E cylinders are mechanical linear actuators with rod, in which the rotary

More information

HEAVY LIFTERS FOR MATERIAL HANDLING

HEAVY LIFTERS FOR MATERIAL HANDLING HEAVY LIFTERS FOR MATERIAL HANDLING Ideal for automated, high load part liftg the automotive and assembly mache builder dustries Available as a drop- replacement M002 Mountg M001 Mountg Switches Stop Collars

More information

Tie rods cylinders to ISO standard Ø

Tie rods cylinders to ISO standard Ø Tie rods cylinders to ISO 5552 standard 25 DESCRIPTION Cylinders series "XL" comply with ISO 5552 standard, being in this way completely interchangeable with the former cylinders to ISO 643 /VDMA 24562

More information

Profile Design Air Cylinder

Profile Design Air Cylinder Profile Design Air Cylinder Series CP5 ø, ø, ø, ø, ø, ø Features Conforms to VDMA 24 562 (parts 1 and 2), ISO 6431 and CETOP standards. Combines lightweight profile barrel design with enclosed tie rods

More information

SERIES MH (NFPA) CYLINDER

SERIES MH (NFPA) CYLINDER MH SERIES TAB 58 Floating Rod Bushing SELF ALIGNMENT FEATURE Rod Bushing is designed to float.002 to improve bearing surface alignment. SERIES MH (NFPA) CYLINDER Reduces cylinder drag and erratic operation

More information

Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm

Aluminium profile. Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 100 mm > Series 62 cylinders CATALOGUE > Release 8.6 Series 62 cylinders - Aluminium profile Double-acting, magnetic, cushioned ø 32, 40, 50, 63, 80, 00 mm»» In compliance with ISO 5552 standards and with the

More information

* Screw clearance to allow bolt head to pass through - no counter bores

* Screw clearance to allow bolt head to pass through - no counter bores Technical Data: Medium: Filtered, lubricated or nonlubricated, compressed air Operating Pressure 00 psig (.6 Bar) Max. Temperature Range: Standard Nitrile seals: -0 F to 00 F (-0 to 65 ) 50 F max. with

More information

Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable

Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable N304 Air Cylinder NCA1 Series NFPA Interchangeable Medium Duty 1.5 ~ 4 Bore 12 Different NFPA Mounting Options Non-Rotating Option Tandem Cylinder Option Auto Switch Capable NFPA Interchangable Air Cylinder

More information

ACTUATORS. F-Series Plus Cylinders Single and Double acting 9/16" to 3" bore. Technical features Medium: Filtered, lubricated or nonlubricated,

ACTUATORS. F-Series Plus Cylinders Single and Double acting 9/16 to 3 bore. Technical features Medium: Filtered, lubricated or nonlubricated, F-Series Plus ylinders Technical features Medium: Filtered, lubricated or nonlubricated, compressed air Operating pressure 200 psig (3.6 Bar) Max. Temperature range: Standard Nitrile seals: -40 F to 200

More information

Double acting, cushioned, magnetic Ø mm

Double acting, cushioned, magnetic Ø mm CATALOGUE > Release 8.7 > Series 40 cylinders Series 40 cylinders Double acting, cushioned, magnetic 60-200 - 250-320 mm In compliance with ISO 5552 standards and with the previous DIN/ISO 643 - VDMA 24562

More information

PERFORMANCE DATA. The lightweight, durable, low-profile ROD CYLINDER SLIDES

PERFORMANCE DATA. The lightweight, durable, low-profile ROD CYLINDER SLIDES The lightweight, durable, low-profile H-Block design is the most versatile of our rod cylinder slides. It also has one of the highest ratings of load weight vs extension for its kind in the industry. The

More information

C-Series Cylinders: Table of Contents

C-Series Cylinders: Table of Contents C-Series Cylinders: Table of Contents C-Series C-Series Slide Features... pg. 2 CD and CE Series... pg. 3 Quick Reference... pg. 3 How to Order: C Series... pg. 4 Options: C Series... pg. Dimensional Data

More information

2. COMPACT CYLINDERS series STRONG (RS, RQ)

2. COMPACT CYLINDERS series STRONG (RS, RQ) 2. COMPACT CYLINDERS series STRONG (RS, RQ) A new series of compact cylinders for long s and heavy-duty applications standard supplied with oversized guides and rods, the first one with adjustable pneumatic

More information

FP 106 x PTM - PS

FP 106 x PTM - PS Single and Double acting 9/6" to " bore Technical Data: Medium: Filtered, lubricated or nonlubricated, compressed air Operating Pressure 00 psig (.6 Bar) Max. Temperature Range: Standard Nitrile seals:

More information

Series C95 ø32, ø40, ø50, ø63, ø80, ø100

Series C95 ø32, ø40, ø50, ø63, ø80, ø100 ISO Cylinder Series C ø, ø, ø, ø, ø, ø0 Dimensions conform to ISO 1, VDMA 2, CETOP RP3P. CJ1 CJP CJ2 CM2 C CG1 M C CA1 CS1 Variations Series Action Style asic Standard variations uit-in magnet Stainless

More information

Two Shaft Linear Thrusters

Two Shaft Linear Thrusters Two Shaft Linear Thrusters TWO SHAFT THRUSTERS Seven Models with bores from 9/16 to 4 Compact, light weight robust design Smooth linear motion CYLINDER Several manufacturers to choose from Pneumatic or

More information

Position Control Hard chrome-plated carbon steel piston rod with blackened threads and wrench flats Sintered bronze rod bushing Internally lubricated

Position Control Hard chrome-plated carbon steel piston rod with blackened threads and wrench flats Sintered bronze rod bushing Internally lubricated Position Control System Products Cylinders 7.3-7.9 Cylinder Rod Lock 7.10-7.11 Cylinder Accessories 7.12-7.15 Pneu-Turn 7.16-7.24 Position Control System 7.25-7.36 Digital Panel Meter 7.37-7.42 Electronic

More information

Features and Benefits

Features and Benefits ...........................................................3-14 Features and Benefits..............................................................................3 How To Order....................................................................................4

More information

KNOCK CYLINDERS CONTENTS ACTUATORS GENERAL CATALOG. Caution KNOCK CYLINDERS

KNOCK CYLINDERS CONTENTS ACTUATORS GENERAL CATALOG. Caution KNOCK CYLINDERS CAD drawing data catalog is available. ACTUATORS GENERAL CATALOG CONTENTS Features/Introductions of Variations 79 Double Acting Type Specifications 81 Order s 82 Inner Construction and Major Parts 83 Dimensions

More information

GRH SERIES GRH PARALLEL GRIPPERS. Long Jaw Travel, Low Profile Gripper with Large Moment Capacities

GRH SERIES GRH PARALLEL GRIPPERS. Long Jaw Travel, Low Profile Gripper with Large Moment Capacities GRH SERIES GRH PARALLEL GRIPPERS Long Jaw Travel, Low Profile Gripper with Large Moment Capacities Wide Jaw Guide System for Minimal Tooling Deflection Million Cycle Life Flexible Mounting Optional Multi-Position

More information

ISO CYLINDERS Ø ACTUATORS

ISO CYLINDERS Ø ACTUATORS ISO 15552 CYLINDERS Ø 250-320 1 Cylinders made to ISO 15552 available in various versions and with a wide range of accessories: double-acting single-or through-rod with or without cushioning configuration

More information

Standard cylinders DNG/DNGZS, ISO 15552

Standard cylinders DNG/DNGZS, ISO 15552 Features Brief description Double-acting For contactless position sensing With adjustable end-position cushioning at both ends Robust tie rod design Standards-based cylinders to ISO15552 (corresponds to

More information

SERIES SCV SLIDES DESIGN 2/6 INFORMATION SHEET

SERIES SCV SLIDES DESIGN 2/6 INFORMATION SHEET SERIES SC SLIDES DESIGN / INFORMATION SHEET IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with slide installation and setup. File with maintenance or machine documentation.

More information

MEDIUM DUTY HYDRAULIC NFPA STYLE 1 1/2 TO 8 BORE AIR 250 PSI HYDRAULIC 1500 PSI

MEDIUM DUTY HYDRAULIC NFPA STYLE 1 1/2 TO 8 BORE AIR 250 PSI HYDRAULIC 1500 PSI AIR CYLINDERS & MEDIUM DUTY HYDRAULIC NFPA STYLE 1 1/2 TO 8 BORE AIR 250 PSI HYDRAULIC 1500 PSI CONSTRUCTION FEATURES 1. Rod Wiper Urethane 90A 65 to +220F, large cross section lip type wiper designed

More information

Series QP - QPR short-stroke cylinders 1/ Series QP: single and double-acting

Series QP - QPR short-stroke cylinders 1/ Series QP: single and double-acting CATALOGUE > Release 8.7 > Series QP - QPR cylinders Series QP - QPR short-stroke cylinders Series QP: single and double-acting, magnetic Series QPR: double-acting magnetic, non-rotating ø 2, 6, 20, 25,

More information

INFORMATION SHEET: SERIES SxL/SxH DESIGN 1 [5] SLIDES

INFORMATION SHEET: SERIES SxL/SxH DESIGN 1 [5] SLIDES INFORMATION SHEET: SERIES SxL/SxH DESIGN [] SLIDES IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with slide installation and setup. File with maintenance or machine documentation.

More information

PL-2 Series Medium-Duty Industrial Hydraulic Cylinders BPL-2 PH-2 PH-3 PHX

PL-2 Series Medium-Duty Industrial Hydraulic Cylinders BPL-2 PH-2 PH-3 PHX PL- Series Medium-Duty Industrial Hydraulic Cylinders PHX PH- PL- PH- Contents Features... Specifications / Mountings... Design Features and enefits... - Mounting Information, " to " ore Sizes... 8- Mounting

More information

Series 83. Stainless Steel Mini Cylinder

Series 83. Stainless Steel Mini Cylinder Stainless Steel Mini Cylinder Magnet included in 7/8 and 1-1/4 bore only in double acting cylinder THEORETICAL CYLINDER FORCE (LBS). Operating Pressures (PSI) Size Action 25 50 75 100 125 150 3/4" Out

More information

ISO 6020/2 industricylindre Industrial cylinders

ISO 6020/2 industricylindre Industrial cylinders According to ISO 6020/2 1991 DIN 24554, compact series 160 bar Working pressure up to 21 Mpa Maximum pressure 25 Mpa Working temperature 20 to 80 C Stroke tolerance 0 to 1.2mm for strokes up to 1000mm,

More information

Ideal for robotic and end effector applications

Ideal for robotic and end effector applications MINIATURE CLAMPS FOR WORKHOLDING APPLICATIONS Ideal for robotic and end effector applications Bayonet Body Option -B11 ORDERING DATA: SERIES GRM CLAMP SIZE 1 INDEX: Ordering Data Page 2 Benefits Page 3

More information

Ideal for robotic and end effector applications

Ideal for robotic and end effector applications MINIATURE CLAMPS FOR WORKHOLDING APPLICATIONS Ideal for robotic and end effector applications Bayonet Body Option -B11 ORDERING DATA: SERIES GRM CLAMP SIZE 1 INDEX: Ordering Data Page 2 Benefits Page 3

More information

XG*-***-****-***-****

XG*-***-****-***-**** Technical details Cylinders > piston rod cylinders > Series XL, ISO ISO 15552, 15552, double double acting acting Operating pressure Temperature range Max. stroke Medium Materials 1... 10 bar -20 C...

More information

Z-Series.qxp:TurnAct Cseries.qxp 10/1/09 2:35 PM Page ii Z-Series Cylinders

Z-Series.qxp:TurnAct Cseries.qxp 10/1/09 2:35 PM Page ii Z-Series Cylinders Z-Series Cylinders Z-Series Cylinders: Table of Contents Z-Series Slide Features...pg. 2 ZD and ZE Series...pg. 3 Quick Reference...pg. 3 How to Order: Z Series...pg. 4 Options: Z Series...pg. 5 Dimensional

More information

INTEGRATED HYDRAULIC BRAKE ACTUATORS

INTEGRATED HYDRAULIC BRAKE ACTUATORS INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE INTEGRATED HYDRAULIC BRAKE The integrated hydraulic brake is comprised of a pneumatic cylinder that acts as an actuator and an oleo-dynamic circuit

More information

Cylinders HD1 Cylinders

Cylinders HD1 Cylinders Cylinders HD Cylinders Cylinders For Abusive Conditions Operating Parameters Reference Control Valves Cylinders Specialty Valves Production Devices Index Combining NFPA dimensional interchangeability and

More information

SERIES PRA AND TRB ISO PNEUMATIC CYLINDERS

SERIES PRA AND TRB ISO PNEUMATIC CYLINDERS SERIES PRA AND TRB ISO 15552 PNEUMATIC CYLINDERS Series PRA and TRB Pneumatic ISO 15552 Cylinders The next generation of ISO cylinders from AVENTICS The Series PRA and TRB cylinder series represent consistent

More information

CATALOG FL-16-B THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES

CATALOG FL-16-B THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES HEAVY-DUTY CATALOG FL-6-B THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES TABLE OF CONTENTS CYLINDER FEATURES DOUBLE-ACTING Series T, TS, TL and TLS 4 DOUBLE-ACTING DOUBLE-ENDED Series TDE and TSDE 4 MAGNETIC

More information

Air/Oil Tanks Air Boosters Cylinder Options Multi-Stage Triple-Rod Basic Cylinders Accessories Technical Data TRA HOW TO ORDER: SERIES TRA (TRIPLE PIS

Air/Oil Tanks Air Boosters Cylinder Options Multi-Stage Triple-Rod Basic Cylinders Accessories Technical Data TRA HOW TO ORDER: SERIES TRA (TRIPLE PIS SERIES TRA TRIPLE ROD NEW HEAVY-DUTY TRIPLE ROD DESIGN TRD s TR Series has been redesigned. The new series, TRA is a Heavy-Duty version of the TR Series. The new series is a drop-in replacement of the

More information

FKHS Series. 3 Jaw Parallel Motion Pneumatic Grippers. Mounting Hole. Sensor Capable. Bottom tapped holes. Dowel Hole & Slot

FKHS Series. 3 Jaw Parallel Motion Pneumatic Grippers. Mounting Hole. Sensor Capable. Bottom tapped holes. Dowel Hole & Slot Catalog No. KHS- KHS Series Jaw Parallel Motion Pneumatic Grippers Mounting Hole Can be mounted from the gripper side Mounting slot for easy sensor installation Sensor Capable Bottom tapped holes Can be

More information

HYDRAULIC HEAVY DUTY

HYDRAULIC HEAVY DUTY Catalog #HHD-16 12/16 HYDRAULIC HEAVY DUTY Series HHD 3000 PSI RATED 10-25-16 WARNING IMPROPER SELECTION, IMPROPER USE OR FAILURE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN CAN CAUSE PROPERTY DAMAGE,

More information