Bimba Metric Flow Controls: FCPM Series M5 Port Mounted Flow Control Valves For M5 port, FCPM-1-Q4-L 4mm OD tubing 2mm ID tubing For M5 port, 4mm OD t

Size: px

Start display at page:

Download "Bimba Metric Flow Controls: FCPM Series M5 Port Mounted Flow Control Valves For M5 port, FCPM-1-Q4-L 4mm OD tubing 2mm ID tubing For M5 port, 4mm OD t"

Roberta Barker
5 years ago
Views:

Bimba Metric Flow Controls: FCPM Series Specifications Fluid Maximum Operating Pressure Minimum Operating Pressure Temperature Range 3 Air 10 Bar (145 PSI) 0.1 Bar (1.

Cartridge Seal Banjo Seal Distance Ring Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass NBR (Buna-N) NBR (Buna-N) NBR (Buna-N) Reinforced Nylon Nickel Plated Brass Nickel Plated Brass

1 Bimba Metric Flow Controls: FCPM Series Specifications Fluid Maximum Operating Pressure Minimum Operating Pressure Temperature Range 3 Air 10 Bar (145 PSI) 0.1 Bar (1.5 PSI) -10º to +80ºC (-14º to +176ºF) Material Specifications For M5 Banjo Stem Check Valve Seal Banjo Seal Distance Ring Material Specifications For G1/8" & G1/4" Banjo Stem Check Valve Check Valve Cartridge Seal Banjo Seal Distance Ring Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass NBR (Buna-N) NBR (Buna-N) NBR (Buna-N) Reinforced Nylon Nickel Plated Brass Nickel Plated Brass Nickel Plated Brass NBR (Buna-N) Brass NBR (Buna-N) Reinforced Nylon Reinforced Nylon For Technical Assistance: Flow Controls Alignment Couplers Flat-1 / Square Flat-1 Flat-II / Square Flat-II FO2, FO3, FO4 (multiple power) FOP (multiple position) Accessories EF1 Cylinders EF2 Cylinders Twin Bore Cylinders Position Sensing Switches

2 Bimba Metric Flow Controls: FCPM Series M5 Port Mounted Flow Control Valves For M5 port, FCPM-1-Q4-L 4mm OD tubing 2mm ID tubing For M5 port, 4mm OD tubing 2mm ID tubing FCPM-1-Q4-R For M5 port, FCPM-1-Q6-L 6mm OD tubing 4mm ID tubing For M5 port, 6mm OD tubing 4mm ID tubing FCPM-1-Q6-R G1/8 Port Mounted Flow Control Valves M5 Controlled Flow Chart (at 5 Bar) Maximum Free Flow Capacity l/min M5 x M5 x M5 x M5 x mm 8mm 8mm 8mm ø4mm ø11 ø4mm ø11 ø6mm ø13 ø6mm ø13 G1/8 Controlled Flow Chart (at 5 Bar) Maximum Free Flow Capacity l/min All prices are F.O.B. Monee, Illinois and are subject to change without notice 4

Bimba Metric Flow Controls: FCPM Series For G 1 8 port, FCPM-2-Q4-L 4mm OD tubing 2mm ID tubing For G 1 8 port, 4mm OD tubing 2mm ID tubing FCPM-2-Q4-R For G 1 8 port, FCPM-2-Q6-L 6mm OD tubing 4mm

3 Bimba Metric Flow Controls: FCPM Series For G 1 8 port, FCPM-2-Q4-L 4mm OD tubing 2mm ID tubing For G 1 8 port, 4mm OD tubing 2mm ID tubing FCPM-2-Q4-R For G 1 8 port, FCPM-2-Q6-L 6mm OD tubing 4mm ID tubing For G 1 8 port, 6mm OD tubing 4mm ID tubing FCPM-2-Q6-R For G 1 8 port, FCPM-2-Q8-L 8mm OD tubing 6mm ID tubing For G 1 8 port, 8mm OD tubing 6mm ID tubing FCPM-2-Q8-R 5 G1/8 G1/8 G1/8 G1/8 G1/8 G1/ mm 14mm All prices are F.O.B. Monee, Illinois and are subject to change without notice 14mm 10mm 14mm 14mm 10mm 14mm 14mm ø4mm 16.2 ø4mm ø6mm ø6mm Ø8mm Ø8mm For Technical Assistance: Flow Controls Alignment Couplers Flat-1 / Square Flat-1 Flat-II / Square Flat-II FO2, FO3, FO4 (multiple power) FOP (multiple position) Accessories EF1 Cylinders EF2 Cylinders Twin Bore Cylinders Position Sensing Switches

Bimba Metric Flow Controls: FCPM Series For G 1 4 port, G1/4 Port Mounted Flow Control Valves

G 1 4 port, FCPM-4-Q8-L 8mm OD tubing 6mm ID tubing For G 1 4 port, 8mm OD tubing 6mm ID tubing

9 29 G1/4 7 38 38 10mm 17mm 17mm ø6mm Ø6mm 19.6 19.6 45 Ø8mm G1/4 9 41 19.

4 Bimba Metric Flow Controls: FCPM Series For G 1 4 port, G1/4 Port Mounted Flow Control Valves FCPM-4-Q6-L 6mm OD tubing 4mm ID tubing For G 1 4 port, 6mm OD tubing 4mm ID tubing FCPM-4-Q6-R For G 1 4 port, FCPM-4-Q8-L 8mm OD tubing 6mm ID tubing For G 1 4 port, 8mm OD tubing 6mm ID tubing FCPM-4-Q8-R G1/4 Controlled Flow Chart (at 5 Bar) Maximum Free Flow Capacity l/min 45 G1/ G1/ mm 17mm 17mm ø6mm Ø6mm Ø8mm G1/ mm ø8mm G1/ mm 17mm All prices are F.O.B. Monee, Illinois and are subject to change without notice 6

FCP Adjusting 3-Stage Tapered Stainless Steel Anodized Aluminum Stem Bimba Flow Controls Chrome Plated Banjo Connector Lip Seal Design Dry Film Thread Sealant FQPS Series FQP

#10-32 NPT Locknut Chrome Plated Banjo Connector Collet O Ring Gripping Teeth Lip Seal Design For Technical Assistance: 800-442-4622 Flow Controls Alignment Couplers Flat-1 /

5 FCP Adjusting 3-Stage Tapered Stainless Steel Anodized Aluminum Stem Bimba Flow Controls Chrome Plated Banjo Connector Lip Seal Design Dry Film Thread Sealant FQPS Series FQP & FCP Series FQP Adjusting 3-Stage Tapered Stainless Steel Anodized Aluminum Stem Dry Film Thread Sealant FLOW 72PSI FLOW 60PSI 7 #10-32 NPT 1/2 NPT 3/8 NPT #10-32 NPT Locknut Chrome Plated Banjo Connector Collet O Ring Gripping Teeth Lip Seal Design For Technical Assistance: Flow Controls Alignment Couplers Flat-1 / Square Flat-1 Flat-II / Square Flat-II FO2, FO3, FO4 (multiple power) FOP (multiple position) Accessories EF1 Cylinders EF2 Cylinders Twin Bore Cylinders Position Sensing Switches

6 Bimba Miniature Quik-Flo For port, FQPS1 FQPS1K 5/32 OD tubing For port, FQPS12 FQPS12K For 1/8 port, FQPS2 FQPS2K For 1/8 port, FQPS21 FQPS21K 5/32 OD tubing For 1/4 port, FQPS44 FQPS44K 6mm HEX 6mm HEX 7mm HEX 7mm HEX 8mm HEX Flow Controls: FQPS Series MAX.78 MAX #10-32 UNF-2A 1.02 MAX.78 MAX #10-32 UNF-2A 1.16 MAX.84 MAX.84 MAX 1.16 MAX 1.28 MAX 1.00 MAX 5/32 O.D /32 O.D..38 Materials: Adjusting knob and thread: Nickel-plated brass Body: Glass-filled nylon Tubing: Nylon, polyurethane and polyethylene tubing Maximum Operating Pressure: 135 PSI Air Only Operating Temperature Range: 30 degrees to 160 degrees F (0 C to 70 C) All prices are F.O.B. Monee, Illinois and are subject to change without notice 8

7 Bimba Flow Controls: FCP Series FCP1 FCP1K FCP1L FCP2 FCP2K FCP2L FCP4 FCP4K FCP4L FCP6 FCP6K FCP6L FCP8 FCP8K FCP8L #10-32 # /8 NPT /2 NPT 0.97 For port 0.42 GASKET For 1/8 port 1.70 For 1/4 port /4 HEX NUT 2.12 For 3/8 port /8 NPT 2.46 For 1/2 port /2 NPT /32 HEX NUT /16 HEX 7/16 HEX NUT /16 HEX /16 HEX /16 HEX NUT /8 HEX 5/8 HEX NUT Materials: Banjo Connector: Chrome plated, zinc die cast Banjo Retaining Ring: Zinc plated steel Stem: High strength anodized aluminum alloy Adjusting : Stainless steel O Rings and Lip Seal: Buna N Maximum Operating Pressure: 150 PSI Air Only Operating Temperature Range: -20 degrees to +200 degrees F (-25 C to +95 C) 3.02 All prices are F.O.B. Monee, Illinois and are subject to change without notice /8 HEX 3.89 For Technical Assistance: Flow Controls Alignment Couplers Flat-1 / Square Flat-1 Flat-II / Square Flat-II FO2, FO3, FO4 (multiple power) FOP (multiple position) Accessories EF1 Cylinders EF2 Cylinders Twin Bore Cylinders Position Sensing Switches

8 For port, 5/32 OD tubing For 1/8 port, For 1/8 port, 5/32 OD tubing For 1/4 port, 3/8 OD tubing Bimba Quik-Flo FQP1 FQP2 FQP21 FQP4 Flow Controls: FQP Series FQP1K FQP2K FQP21K FQP4K /16 HEX # /16 HEX 5/32 O.D /32 O.D /16 HEX /8 O.D /16 HEX All prices are F.O.B. Monee, Illinois and are subject to change without notice 10

9 FQP44 Bimba Quik-Flo FQP44K Flow Controls: FQP Series /16 HEX 3/8 NPT 11 3/8 O.D. 7/8 HEX FQP6 FQP6K For 3/8 port, 3/8 OD tubing Bimba Valves For 1/4 port, Bimba offers a range of Quik-Flo Valves, allowing for controlled flow of both the air intake and exhaust through the same valve. A needle valve can control a double acting cylinder s extension and retraction by controlling the volume of air entering the cylinder and the volume of air leaving the cylinder. For additional dimensional information, reference Quik-Flo Flow Controls on pages 10 and 11. For example, reference FQP1 for QNV1 dimensions. WARRANTY Model Tube Size Port Size Cv QNV1 5/32" # QNV1K 5/32" # QNV2 1/4" 1/8" NPT.21 QNV2K 1/4" 1/8" NPT.21 QNV /4" 1/4" NPT.44 QNV44K /4" 1/4" NPT.44 QNV /8" 3/8" NPT.73 QNV6K /8" 3/8" NPT.73 Materials: Banjo Connector: Chrome plated, zinc die cast Banjo Retaining Ring: Zinc plated steel Stem: High strength anodized aluminum alloy Adjusting : Stainless steel O Rings and Lip Seal: Buna N Collet: Acetal copolymer Gripping teeth: Stainless steel Collet Retainer (if applicable): Brass Locknut: Chrome-plated brass Tube Types: All plastic tubing, including nylon and polyethylene Maximum Operating Pressure: 150 PSI Air Only Operating Temperature Range: 14 degrees to +167 degrees F (-25 to +75 C) All Bimba products are warranted against defects in workmanship or material under normal conditions and usage for a period of two years from the date of shipment. Your exclusive remedy in the event of such a defect is to return the product to our factory for repair, replacement or refund, clearly identified by the Bimba Returned Goods Authorization number. This Warranty does not cover products which have been subject to misuse, negligence, accidents, misapplications or tampering in a way so as to affect their normal performance. Bimba shall not be liable for special, indirect or consequential damages. All prices are F.O.B. Monee, Illinois and are subject to change without notice Bimba gives no warranty, express or implied, as to merchantability, fitness for particular purpose as sold, description, quality or any other matter beyond that specified above. Bimba does not assume, nor authorize anyone else to assume for it, any other obligation or liability in connection with the sale or use of its products. All prices are F.O.B. Monee, Illinois and subject to change without notice. Product enhancements resulting from our continuing quality improvement effort may necessitate changes in specifications without notice. For Technical Assistance: Flow Controls Alignment Couplers Flat-1 / Square Flat-1 Flat-II / Square Flat-II FO2, FO3, FO4 (multiple power) FOP (multiple position) Accessories EF1 Cylinders EF2 Cylinders Twin Bore Cylinders Position Sensing Switches

10 Bimba Metric Flow Controls: FCPM Series How to Order The Model Number for all extruded track mount switches consists of three alphanumeric clusters. These designate switch type and lead length. Please refer to the chart below for an example of Model Number MSCQCX. This is a Solid State switch with PNP output including a Quick Connect cable attachment and a 5 meter mating cable. MR- MSC- MSK- MS- Switch Type Magnetic Reed Switch GMR Source (PNP) output GMR Sink (NPN) output GMR auto-configure Base Model C4 C4X MSC X QCX Optional X - Include if 144 (3.6m) pigtail lead needed (not applicable with Quick Connect) List Prices To Order Cable Connectors Separately Description 2 meter straight 5 meter straight Mounting To Install: Slide the switch into the cylinder s switch track. Extend and retract the cylinder while positioning the switch until the switch s operating window is correct. Secure the switch in the cylinder track by turning the set screw with a hex driver. Cycle the cylinder (both extending and retracting) a number of times to confirm correct operation and adjust as required. Note: Maximum torque on set screw is.170 N-m (1.5 in.-lbs.). Do not overtighten. All prices are F.O.B. Monee, Illinios and are subject to change without notice Q - QC - QCX - Optional 8mm Quick Connect without cable 2 meter mating cable accompanies switch 5 meter mating cable accompanies switch Base Model Base Model with Options MR MRX MRQ MRQC MRQCX (Magnetic Reed) (3.6m leads) (Quick Connect) (2m mating cable) (5m mating cable) $17.50 $28.50 $33.50 $53.50 $63.50 MSC (GMR Source output) MSCX (3.6m leads) MSCQ (Quick Connect) MSCQC (2m mating cable) MSQCX (5m mating cable) $28.80 $39.80 $44.80 $64.80 $74.80 MSK (GMR Sink output) MSKX (3.6m leads) MSKQ (Quick Connect) MSKQC (2m mating cable) MSKQCX (5m mating cable) $28.80 $39.80 $44.80 $64.80 $74.80 MS (Auto-configure) MSX (3.6m leads) MSXQ (Quick Connect) MSQC (2m mating cable) MSQCX (5m mating cable) $35.75 $45.00 $48.35 $68.35 $

Adjusting 3-Stage Tapered Stainless Steel Anodized Aluminum Stem FQPS Series FCP FLOW DATA @ 72PSI Chrome Plated Banjo Connector Lip Seal Design Dry Film Thread Sealant

Plated Banjo Connector Collet O Ring Gripping Teeth Lip Seal Design 1/2 NPT 3/8 NPT #10-32 NPT Flow Controls Linear Thrusters Pneu-Turn Rotary Actuators Ultran Cylinders

11 Adjusting 3-Stage Tapered Stainless Steel Anodized Aluminum Stem FQPS Series FCP FLOW 72PSI Chrome Plated Banjo Connector Lip Seal Design Dry Film Thread Sealant #10-32 NPT Adjusting 3-Stage Tapered Stainless Steel Anodized Aluminum Stem Dry Film Thread Sealant Bimba Flow Controls FQP FQP & FCP Series Locknut FLOW 60PSI Chrome Plated Banjo Connector Collet O Ring Gripping Teeth Lip Seal Design 1/2 NPT 3/8 NPT #10-32 NPT Flow Controls Linear Thrusters Pneu-Turn Rotary Actuators Ultran Cylinders Shock Absorbers (Pneumatic Actuators) Pneu Moment Transition Plates Multi-Axis Configurations Position Sensing Switches Application Checklist 3 For Technical Assistance:

Bimba Miniature Quik-Flo Flow Controls: FQPS Series For 10-32 port, FQPS1 FQPS1K 5/32 OD

FQPS21K 5/32 OD tubing For 1/4 port, FQPS44 FQPS44K (Units shown in inch for all drawings)

78 MAX #10-32 UNF-2A 1.16 MAX.84 MAX.84 MAX 1.16 MAX 1.00 MAX 1.02 MAX #10-32 UNF-2A 1.

12 Bimba Miniature Quik-Flo Flow Controls: FQPS Series For port, FQPS1 FQPS1K 5/32 OD tubing For port, FQPS12 FQPS12K For 1/8 port, FQPS2 FQPS2K For 1/8 port, FQPS21 FQPS21K 5/32 OD tubing For 1/4 port, FQPS44 FQPS44K (Units shown in inch for all drawings) 6mm HEX 6mm HEX 7mm HEX 7mm HEX 8mm HEX MAX MAX.78 MAX #10-32 UNF-2A 1.16 MAX.84 MAX.84 MAX 1.16 MAX 1.00 MAX 1.02 MAX #10-32 UNF-2A 1.28 MAX 5/32 O.D /32 O.D..38 Materials: Adjusting knob and thread: Nickel-plated brass Body: Glass-filled nylon Tubing: Nylon, polyurethane and polyethylene tubing Maximum Operating Pressure: 135 PSI Air Only Operating Temperature Range: 30 degrees to 160 degrees F (0 C to 70 C) 4

13 FCP1 FCP1K FCP1L FCP2 FCP2K FCP2L FCP4 FCP4K FCP4L FCP6 FCP6K FCP6L (Units shown in inch for all drawings) Bimba Flow Control: FCP Series 3/8 NPT 0.80 #10-32 # /8 NPT For port 0.42 GASKET For 1/8 port 1.70 For 1/4 port 2.35 For 3/8 port /4 HEX NUT /32 HEX NUT /16 HEX 7/16 HEX NUT 9/16 HEX NUT /16 HEX /16 HEX 7/8 HEX Materials: Banjo Connector: Banjo Retaining Ring: Stem: Adjusting : O Rings and Chrome plated, Zinc plated steel High strength anodized Stainless steel Lip Seal: zinc die cast aluminum alloy Buna N Maximum Operating Pressure: Operating Temperature Range: 150 PSI Air Only -20 degrees to +200 degrees F (-25 C to +95 C) 3.02 Flow Controls Linear Thrusters Pneu-Turn Rotary Actuators Ultran Cylinders Shock Absorbers (Pneumatic Actuators) Pneu Moment Transition Plates Multi-Axis Configurations Position Sensing Switches Application Checklist 5 For Technical Assistance:

Bimba Quik-Flo Flow Controls: FQP Series For 10-32 port, 5/32 OD tubing For 1/8 port, For 1/8 port, 5/32 OD tubing For 1/4 port, 3/8 OD tubing FQP1 FQP2 FQP21 FQP4 (Units shown in inch for all

14 Bimba Quik-Flo Flow Controls: FQP Series For port, 5/32 OD tubing For 1/8 port, For 1/8 port, 5/32 OD tubing For 1/4 port, 3/8 OD tubing FQP1 FQP2 FQP21 FQP4 (Units shown in inch for all drawings) FQP1K FQP2K FQP21K FQP4K /16 HEX # /16 HEX 9/16 HEX 11/16 HEX 5/32 O.D /32 O.D /8 O.D

FQP44 FQP44K Bimba Quik-Flo Flow Controls: FQP Series FQP6 FQP6K For 3/8 port, 3/8 OD tubing Bimba Valves Model Tube Size Port Size Cv Bimba offers a range of Quik-Flo Valves, allowing for controlled

A needle valve can control a double acting cylinder s extension and retraction by controlling the volume of air entering the cylinder and the volume of air leaving the cylinder.

15 FQP44 FQP44K Bimba Quik-Flo Flow Controls: FQP Series FQP6 FQP6K For 3/8 port, 3/8 OD tubing Bimba Valves Model Tube Size Port Size Cv Bimba offers a range of Quik-Flo Valves, allowing for controlled flow of both the air intake and exhaust through the same valve. A needle valve can control a double acting cylinder s extension and retraction by controlling the volume of air entering the cylinder and the volume of air leaving the cylinder. For additional dimensional information, reference Quik-Flo Flow Controls on pages 6 and 7. For example, reference FQP1 for QNV1 dimensions For 1/4 port, 11/16 HEX 7/8 HEX 3/8 NPT 3/8 O.D (Units shown in inch for all drawings) Materials: Banjo Connector: Banjo Retaining Ring: Stem: Adjusting : O Rings and Chrome plated, Zinc plated steel High strength anodized Stainless steel Lip Seal: zinc die cast aluminum alloy Buna N Collet: Gripping teeth: Collet Retainer Locknut: Tube Types: Acetal copolymer Stainless steel (if applicable): Chrome-plated brass All plastic tubing, Brass including nylon and polyethylene Maximum Operating Pressure: Operating Temperature Range: 150 PSI Air Only 14 degrees to +167 degrees F (-25 to +75 C) QNV1 $ /32" # QNV1K /32" # QNV /4" 1/8" NPT.21 QNV2K /4" 1/8" NPT.21 QNV /4" 1/4" NPT.44 QNV44K /4" 1/4" NPT.44 QNV /8" 3/8" NPT.73 QNV6K /8" 3/8" NPT.73 Flow Controls Linear Thrusters Pneu-Turn Rotary Actuators Ultran Cylinders Shock Absorbers (Pneumatic Actuators) Pneu Moment Transition Plates Multi-Axis Configurations Position Sensing Switches Application Checklist 7 For Technical Assistance:

These designate product type, bore size and stroke length, and options.

16 Bimba Extruded Linear Thrusters The Bimba Extruded Thruster is a rugged, guided actuator with a cylinder integral to the thruster block. The sleek body incorporates switch mounting, for a clean, space-efficient package. The model number for Extruded Linear Thrusters consists of three alphanumeric clusters. These designate product type, bore size and stroke length, and options. How to Order 8 Please note the following features are standard, and are included in all model numbers: E (inch-series threading), and M (magnet for position sensing). Model Bore Sizes Options ET Extruded Thruster 12-12mm U.S. Customary Units - Extended Shafts; 4 bushings 16-16mm E Inch Series Porting/Mounting Extruded Thruster 20-20mm *Standard; included in all model numbers ETS - Shafts Flush; 2 bushings External Bumpers 25-25mm EB External Bumpers, Retract Extruded Thruster ETD mm EB1 External Bumpers, Extend Double-end; Saddle Mount EB2 External Bumpers, Both Ends ETS - EB available only ET EK12M No Stroke Reduction with Bumpers Extend Bumpers include One Set of Collars Shock Absorbers K First _ will be: 1-Both Ends 2-Extend Only 3-Retract Only Second _ will be: 1-Light Duty Standard Stroke Lengths 2-Medium Duty 5mm Increments to 255mm 3-Heavy Duty Exceptions ETS - K3 available only (retract only) ET with Option X ET with Option K See Minimum Stroke Note in Stroke Table ETD with Option X Magnetic Position Sensing (Ball Bearings) (Shock Absorbers) Only 2 Bushings (not 4) M MRS Position Sensing Minimum Stroke Length when stroke is less than *Standard; included in all model numbers 26mm N/A 26mm Alternate Port Location 26mm N/A 26mm P Ports on Top Surface 26mm N/A 26mm Must be specificed if Option X is ordered Fluoroelastomer Seals 39mm 16mm 39mm V High Temperature (0 to 275 deg F) 42mm 45mm 42mm Ball Bushings X Ball Bushings and Hardened Shafts Must specify Option P with X Option List Prices Model Type 12mm 16mm 20mm 25mm 32mm ET (extended shafts, 4 bushings) $ $ $ $ $ add per 5mm stroke ETS (shafts flush, 2 bushings) add per 5mm stroke ETD (double-end, saddle mount) add per 5mm stroke Options 12mm 16mm 20mm 25mm 32mm EB (External Bumpers, Retract) EB1 (External Bumpers, Extend) EB2 (External Bumpers, Both Ends K (Shock Absorbers); Per End V (High Temperature Seals) X (Ball Bushings) ETS X (Ball Bushings) ETD and ET No Charge Options: P Included as Standard in Base: E, M All prices are F.O.B. Monee, Illinois, and are subject to change without notice.

Bimba Flow Controls. FQPS Series FQP & FCP Series. 3 For Technical Assistance: Controls. Flow. Thrusters. Linear.

Bimba Flow Controls. FQPS Series FQP & FCP Series. 3 For Technical Assistance: Controls. Flow. Thrusters. Linear. Bimba Flow Controls FCP FQP Flow Controls Adjusting Needle 3-Stage Tapered Stainless Steel Needle Chrome Plated Banjo Connector Adjusting Needle 3-Stage Tapered Stainless Steel Needle Locknut Chrome Plated