Parts 3A2528C EN. Mark VII Max, Mark X Premium, and Mark X Max Electric Airless Sprayers
|
|
- Horace Hall
- 6 years ago
- Views:
Transcription
1 Parts Mark VII Max, Mark X Premium, and Mark X Max Electric Airless Sprayers 3A2528C EN For Portable Airless Spraying of Architectural Coatings and Paints. For professional use only. Not approved for use in European explosive atmosphere locations psi (227 bar, 22.7 MPa) Maximum Working Pressure IMPORTANT SAFETY INSTRUCTIONS Read all warnings and instructions in the Operation manual. Save these instructions. Related Manuals: 3A2243 ti8238a 3A Mark VII Max Mark X Premium Mark X Max
2 Parts - Mark VII Max and Mark X Max Parts - Mark VII Max and Mark X Max Mark X b 68f 68d 68 68a a c e Page ti8677a 87 Mark X Pages 6 and 7 2 3A2528C
3 Parts - Mark VII Max and Mark X Max Parts List - Mark VII Max and Mark X Max 6 5C753 SCREW, mach, hex wash hd 6 8 5E89 CLIP, retaining WASHER, flat WHEEL, pneumatic WASHER, lock, hi-collar (Mark VII) WASHER, lock, hi-collar (Mark X) SCREW, cap, socket head (Mark VII) SCREW, cap, socket head (Mark X) CAP, leg NUT, lock, nylon, thin pattern WASHER, wave spring WASHER, thrust WASHER, thrust SCREW, mach, slot hex wash hd WASHER, thrust SCREW, cap, hex hd 4 4 5G880 FITTING, pump, quick disconnect (Mark VII) SPRING, retaining (Mark VII) 9677 SPRING, retaining (Mark X) 44 5F0 PIN, pump (Mark VII) 5F097 PIN, pump (Mark X) STRAINER, (- /2 npsm) 5 6N409 COVER, drive, plastic, painted (includes 3) (Mark VII) 6N40 COVER, drive, plastic, painted (includes 3) (Mark X) 55 C2095 O-RING SHIELD, motor, painted (includes 24, 23) 62 24J083 FRAME, platinum HOUSING, bearing (Mark VII) HOUSING, bearing (Mark X) MOTOR, electric (includes 26, 27) (Mark VII) MOTOR, electric (includes 26, 79, 228) (Mark X) ROD, connecting (includes 43, 44) (Mark VII) ROD, connecting (includes 43, 44) (Mark X) DEFLECTOR, threaded GEAR, combination (includes 28, 30) (Mark VII) GEAR, combination (includes 28, 30) (Mark X) 90 24M47 HOUSING, drive (includes 6, 36) (Mark VII) HOUSING, drive (includes 6, 36) (Mark X) 90a 9473 WASHER 9 24M46 PUMP, displacement (includes 4, 55) (Mark VII) PUMP, displacement (Mark X) HOSE, drain (includes 87) HOSE, coupled, /2 in. (includes 5) (Mark VII) 6P256 HOSE, coupled, /2 in. (includes 5) (Mark X) TOOL BOX (includes 04) SCREW, thd forming, hex washer hd Y455 BAR, kick stand 06 5C982 CAM, cart SCREW, mach, hex washer hd GROMMET, cover SCREW, shoulder D088 FAN, motor (Mark VII) 5V577 FAN, motor (Mark X) SCREW, mach, torx pan hd (Mark VII) PACKING, o-ring 54 5F584 LABEL, ProConnect SHELF, ultra, pem assembly BRACKET, wire 60 24M97 BRACKET, hose wrap SCREW, slot hex wash hd M6 KIT, check valve (includes 68a - 68f) 68a 6N46 HOUSING, seat, check valve 68b 6N462 HOUSING, ball, check valve 68c 24M725 KIT, repair, check valve (includes 68d, 68e, 68f, 55) 68d O-RING 68e SEAT, valve 68f BALL, ceramic 79 5G845 SPACER, standoff 2 8 5Y8 LABEL, Made in the USA 87 6N555 LABEL, brand, Mark Max 88 6N559 LABEL, brand, Mark VII Max, front 6N56 LABEL, brand, Mark X Max, front 92 6N565 LABEL, brand, Mark Max, Platinum 99 6N563 LABEL, brand, Mark VII Max, side 6N562 LABEL, brand, Mark X Max, side RING, retaining, external (Mark X) 3A2528C 3
4 Parts - Mark X Premium Parts - Mark X Premium b 68f 68d a c 68e a Page ti8678a 30 Pages 6 and A2528C
5 Parts - Mark X Premium Parts List - Mark X Premium 4 24A250 HANDLE, assy 6 5C753 SCREW, mach, hex wash hd 6 8 5E89 CLIP, retaining WASHER, flat WHEEL, pneumatic CAP, leg NUT, lock, nylon, thin pattern WASHER, wave spring SCREW, cap, flange head WASHER, thrust WASHER, thrust SCREW, mach, slot hex wash hd WASHER, thrust SCREW, cap, hex hd SPRING, retaining 44 5F097 PIN, pump STRAINER, (- /2 npsm) COVER, drive, plastic, painted (includes 3) 55 C2095 O-RING SHIELD, motor, painted (includes 23, 24) FRAME, cart, Mark X HOUSING, bearing MOTOR, electric, Mark X, (240V) (includes 26, 79, 228) ROD, connecting (includes 43, 44) DEFLECTOR, threaded GEAR, combination (includes 28, 30) HOUSING, drive, Mark X (includes 6, 36) 90a 9473 WASHER PUMP, displacement HOSE, drain, Ultra hi-boy (includes 87) 94 6P256 HOSE, coupled, /2 in. (includes 5) (Mark VII) TOOL BOX (includes 04) SCREW, thd forming, hex washer 3 hd 05 5Y455 BAR, kick stand 06 5C982 CAM, cart SCREW, mach, hex washer hd GROMMET, cover SCREW, shoulder V577 FAN, motor HOSE, cpld, /2 in. x 50 ft, 3300 wp GUN, inline texture PACKING, o-ring 54 5F584 LABEL, ProConnect SHELF, ultra, pem assembly BRACKET, wire 68 24M6 KIT, check valve (includes 68a - 68f) 68a 6N46 HOUSING, seat, check valve 68b 6N462 HOUSING, ball, check valve 68c 24M725 KIT, repair, check valve (includes 68d, 68e, 68f, 55) 68d O-RING 68e SEAT, valve 68f BALL, ceramic SCREW, cap, socket head WASHER, lock, spring, (hi-collar) G845 SPACER, standoff 2 8 5Y8 LABEL, Made in the USA SCREW, mach, pnh G968 LABEL, front, Mark X 99 5G969 LABEL, side, Mark X RING, retaining, external 3A2528C 5
6 Parts - Mark VII and Mark X Control Box and Board Parts - Mark VII and Mark X Control Box and Board c 76a 6 76b ref ti8450a b G935 CONNECTOR, electrical PLUG, pipe SCREW, mach, pan head SCREW, cap, flange head SCREW, grounding 29 6K49 GROMMET, motor lead 33 5D527 SWITCH, rocker, 240V KNOB, potentiometer SCREW, #0, taptite phil WASHER BUSHING, strain relief NUT, locking CONTROL, board (Mark VII) 24M0 CONTROL, board (Mark X) LOCK, cord 52 6N278 CONTROL, board, blue, 50 amp, PAD, foam (included in 96) 6 6M839 BOX, control, Mark VII 6M579 BOX, control, Mark X 63 5X508 LABEL, brand (Max units) LABEL (Premium units) 68 5X480 PANEL, control (Max units) 5X67 PANEL, control (Premium units) 70 5D036 GASKET, control box 75 6M834 CORD, power, w/ iec cee 7/7 (Mark VII) 5G957 CORD, power, w/ iec cee 7/7 (Mark X) 6M836 CORD, power, multi (Mark VII) 5G938 CORD, power, multi (Mark X) 75b KIT, accessory, cordset, global 78 6D640 GASKET 79 6D642 GASKET POTENTIOMETR, assembly (includes fastening nut) KIT, repair, display (Max units) (includes 38, 57, 63, 93) KIT, repair, display (Premium units) (includes 38, 57, 63, 93) SWITCH, rocker FITTING, hydraulic SCREW, mach, flat hd G596 LABEL, warning icons intl 47 5X903 LABEL (Max units) 5X902 LABEL (Premium units) SWITCH, reed (Max units) KIT, repair, coil (Mark X) 76a COIL, filter (Mark X) 76b SCREW, machine, flat head (Mark X) 76c NUT, lock (Mark X) 93 5X507 LABEL, brand, smartcontrol (Max units) 5K394 LABEL, control box cover (Premium units) GASKET (Max units) 5C973 GASKET (Premium units) Replacement warning labels are available at no cost. 6 3A2528C
7 Parts - Filter Assembly Parts - Filter Assembly 66 9 Mark X Premium units * 72* 73* Mark VII units * 50* 75* ti845a FITTING, 45 degree, elbow, #8 JIC x 3/8 tube (Mark VII) FITTING, elbow, 90 deg (Mark X) PACKING, o-ring 5 6M504 PACKING, square ring PACKING, o-ring 2 5C972 PIN, spring WASHER, lock, spring (hi-collar) D033 GROMMET, transducer 50 24E233 KIT, handle, fast flush (Mark VII) (includes 2) 5G563 HANDLE, valve (Mark X) 64 6M543 SCREW, cap, shc C765 CAP, filter 67 6M70 BASE, filter 74 5C766 TUBE, diffusion 80 24A38 VALVE, prime, heavy duty * VALVE, drain, assy (Mark X) TRANSDUCER, pressure control (includes 20) FILTER, fluid 30 mesh FILTER, fluid 60 mesh, original equip FILTER, fluid 00 mesh FILTER, fluid 200 mesh 3 6K65 SPACER, manifold PLUG, pipe 6 24J08 TUBE, formed (Mark VII) 6M44 TUBE, formed (Mark X) SEAL, seat, valve SEAT, valve SPRING, compression NUT, cap SEAL, fitting, flared FITTING, nipple, pipe, rdcg * Drain valve repair kit is available (includes 50, 80, 72, 73, 74, 75) 3A2528C 7
8 Parts - Hose Reel and Guns Parts - Hose Reel and Guns ref Mark VII Mark X ti8754a 8 3A2528C
9 Parts - Bearing Housing Parts List - Hose Reel and Gun 5 6C975 PLATE, pivot mount 6 23 FITTING, connector, npt x jic SCREW, hex washer hd, thd form HOSE, cpld, /2 in. x 50 ft, WP GUN, spray, texture GUN, inline, texture 6 24J08 TUBE, formed (Mark VII) 6M44 TUBE, formed (Mark X) 66 24B94 TRANSMITTER, pressure, remote SEAL, fitting, flared FITTING, nipple, pipe, rdcg HOSE, CPLD, 3/8 in. x in. 0 ft BUSHING, 3/8 in. x /4 in SWIVEL 20 24B69 REEL, hose 2 24E400 PIN, pop, lock out SCREW, shoulder, sch SPRING, die HANDLE, swivel WASHER, flat 26 5X68 NUT, swivel, handle ELBOW, 45 degree ADAPTER (Mark VII) ADAPTER (Mark X) E06 TUBE, hose reel, pivot WASHER, flat SPRING, wave RING, retaining, external B248 CAP, swivel, complete RING, retaining, external CAP FITTING Parts - Bearing Housing ti8667a 52 Parts List - Bearing Housing F6 LATCH, handle CLIP, drain line 08 5F503 SCREW, set, socket SCREW, shoulder 39 5E625 PIN, housing, bearing 40 5G890 LATCH, bearing housing NUT, lock, insert, nylock, 5/ G584 RECEIVER, clamp SCREW, shoulder, skt hd 56 5F498 SCREW, adjustment WASHER, lock ext 77 3A2528C 9
10 Notes Notes 0 3A2528C
11 Notes Notes 3A2528C
12 Graco Standard Warranty Graco warrants all equipment referenced in this document which is manufactured by Graco and bearing its name to be free from defects in material and workmanship on the date of sale to the original purchaser for use. With the exception of any special, extended, or limited warranty published by Graco, Graco will, for a period of twelve months from the date of sale, repair or replace any part of the equipment determined by Graco to be defective. This warranty applies only when the equipment is installed, operated and maintained in accordance with Graco s written recommendations. This warranty does not cover, and Graco shall not be liable for general wear and tear, or any malfunction, damage or wear caused by faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance, negligence, accident, tampering, or substitution of non-graco component parts. Nor shall Graco be liable for malfunction, damage or wear caused by the incompatibility of Graco equipment with structures, accessories, equipment or materials not supplied by Graco, or the improper design, manufacture, installation, operation or maintenance of structures, accessories, equipment or materials not supplied by Graco. This warranty is conditioned upon the prepaid return of the equipment claimed to be defective to an authorized Graco distributor for verification of the claimed defect. If the claimed defect is verified, Graco will repair or replace free of charge any defective parts. The equipment will be returned to the original purchaser transportation prepaid. If inspection of the equipment does not disclose any defect in material or workmanship, repairs will be made at a reasonable charge, which charges may include the costs of parts, labor, and transportation. THIS WARRANTY IS EXCLUSIVE, AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO WARRANTY OF MERCHANTABILITY OR WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. Graco s sole obligation and buyer s sole remedy for any breach of warranty shall be as set forth above. The buyer agrees that no other remedy (including, but not limited to, incidental or consequential damages for lost profits, lost sales, injury to person or property, or any other incidental or consequential loss) shall be available. Any action for breach of warranty must be brought within two (2) years of the date of sale. GRACO MAKES NO WARRANTY, AND DISCLAIMS ALL IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, IN CONNECTION WITH ACCESSORIES, EQUIPMENT, MATERIALS OR COMPONENTS SOLD BUT NOT MANUFACTURED BY GRACO. These items sold, but not manufactured by Graco (such as electric motors, switches, hose, etc.), are subject to the warranty, if any, of their manufacturer. Graco will provide purchaser with reasonable assistance in making any claim for breach of these warranties. In no event will Graco be liable for indirect, incidental, special or consequential damages resulting from Graco supplying equipment hereunder, or the furnishing, performance, or use of any products or other goods sold hereto, whether due to a breach of contract, breach of warranty, the negligence of Graco, or otherwise. Graco Information For the latest information about Graco products, visit TO PLACE AN ORDER, contact your Graco distributor or call to identify the nearest distributor. All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice. For patent information, see Original instructions. This manual contains English. MM 3A2528 Graco Headquarters: Minneapolis International Offices: Belgium, China, Japan, Korea GRACO INC. AND SUBSIDIARIES P.O. BOX 44 MINNEAPOLIS MN USA Copyright 2009, Graco Inc. All Graco manufacturing locations are registered to ISO September 202
Mark V Premium and Mark V Max Electric Airless Sprayers
Parts Mark V Premium and Mark V Max Electric Airless Sprayers 3A2245B EN For Portable Airless Spraying of Architectural Coatings and Paints. For professional use only. Not approved for use in European
More informationUltra Platinum Sprayers
Parts Ultra Platinum Sprayers 313565F EN For Portable Airless Spraying of Architectural Coatings and Paints. For professional use only. Not approved for use in European explosive atmosphere locations.
More informationUltra Platinum Sprayers
Parts Ultra Platinum Sprayers Models - For Portable Airless Spraying of Architectural Coatings and Paints - 313565E rev.b Vac Model Hi-Boy 240 Europe 240 Europe Multi-Cord 110 UK 695 257034 795 257037
More informationUltimate Mx II. Parts List E psi (228 bar, 22.8 MPa) Maximum Working Pressure. Vac Model Type Lo-Boy Hi-Boy. Sherwin Williams 120V
Parts List Ultimate Mx II 3437E 3300 psi (228 bar, 228 MPa) Maximum Working Pressure Vac Model Type Lo-Boy Hi-Boy Sherwin Williams 20V Sherwin Williams 20V 695 Standard 826068 826067 Premium 826070 826069
More informationParts D EN. 695 / 795 / 1095 / 1595 / Mark IV / Mark V / Mark X Electric Airless Sprayers
Parts 9 / 9 / 09 / 9 / Mark IV / Mark V / Mark X Electric Airless Sprayers 9D EN For Portable Airless Spraying of Architectural Coatings and Paints. For professional use only. Not approved for use in European
More informationUltra Max II Ultimate Mx II
Parts Ultra Max II Ultimate Mx II 3362S EN - For application of architectural paints and coatings This manual covers every series - Korean patent 0-057968 3300 psi (228 bar, 228 MPa) Maximum Working Pressure
More informationPlus Mark V Mark V Plus
Parts List Ultra Max II 3363K ENG 3300 psi (228 bar, 228 MPa) Maximum Working Pressure Vac Model Lo-Boy Hi-Boy 240 Europe 240 Europe Multi-cord 240 Asia 695 25534 249663 795 249666 25349 795 Plus 25665
More informationST Max 395/495/595 ST Max II 490/495/595
Parts ST Max 395/495/595 ST Max II 490/495/595 309706P EN For professional use only. 3300 psi (22.8 MPa, 228 bar) Maximum Working Pressure See page 2 for model information. Important Safety Instructions
More information390 Airless Sprayer. Parts J EN. Models: , , , , , ,262024, , , , Hi-Boy.
Parts 390 Airless Sprayer 37J EN Models: 253958, 254998, 2209, 25498, 25499, 2539,22024, 2539, 25392, 2548, 82084 Important Safety Instructions Read all warnings and instructions in the Operation and Repair
More information695 / 795 / 1095 / Mark IV / Mark V / Mark VII / Mark X Electric Airless Sprayers
GRACO Parts 9 / 9 / 09 / Mark IV / Mark V / Mark VII / Mark X Electric Airless Sprayers A EN For Portable Airless Spraying of Architectural Coatings and Paints. For professional use only. Not approved
More informationASM Maxi Poles. Instruction-Parts B Series. For the application of architectural paints and coatings.
Instruction-Parts ASM Maxi Poles 312483B For the application of architectural paints and coatings. 3400 Series 4050 psi (27.92 MPa, 280 bar) Maximum Working Pressure Important Safety Instructions Read
More information24G621 Agitator Speed Controller Accessory
Instructions-Parts 24G62 Agitator Speed Controller Accessory 3A35A ENG Accessory kit to control and automatically maintain the speed of an air-powered agitator. For professional use only. Important Safety
More informationPump Package Conversion Kits
Instructions - Parts Pump Package Conversion Kits A0B ENG To install an L00CM or L500CM Check-Mate Displacement Pump on an existing motor. For professional use only. Not for use in explosive atmospheres.
More informationUniversal Hand Pump. Instructions D EN. - For transferring grease to Grease Jockey and G3 Systems - Part No Hand Operated - 35# Pump
Instructions Universal Hand Pump 31758D EN - For transferring grease to Grease Jockey and G3 Systems - Part No. 47886 Hand Operated - 35# Pump 600 psi (4.13 MPa, 41.3 bar) Maximum Working Pressure 85 ml
More informationModel Reverse (up cut) / inlay and grooving (Must be used with LineDriver ) GrindLazer 480 (480 cc / 16 hp)
Parts GrindLazer 3A003E Patent Pending EN - Designed to grind flat, horizontal concrete or asphalt surfaces - For removal of materials from concrete and asphalt surfaces - Professional outdoor use only
More informationMotor Mounting Kits. Instructions J EN. 16C487 Motor Coupler Kit includes 2.25 in. (57.2 mm) key For NEMA 182/184 TC Frame ATEX Electric Motors
Instructions Motor Mounting Kits 31160J EN To install electric motors on E-Flo 4-Ball Piston Pumps. For professional use only. (Kits do not include motors.) 16C487 Motor Coupler Kit includes 2.2 in. (7.2
More informationPARTS. Ultra Max 1595 and Mark V Airless Paint Sprayers 3300 psi (227 bar, 22.7 MPa) Maximum Working Pressure. Rev. C
PARTS 309268 Rev. C Ultra Max 1595 and Mark V Airless Paint Sprayers 3300 psi (227 bar, 22.7 MPa) Maximum Working Pressure Type Series Model Vac Ultra Max 1595 A 245048 245099 230 100 120 (Japan/Taiwan)
More informationStainless Steel Air Motor Conversion Kits
Instructions Stainless Steel Air Motor Conversion Kits 096D Conversion Kit 650 For 00 Pumps Conversion Kit 65 For 590 Pumps Conversion Kit 65 For 50 Pumps Model 650 Model 65 Model 65 Installation Pressure
More informationColor Change Valve. Instructions Parts List K
Instructions List Color Change Valve 0K For color changing or distribution of industrial paints and coatings or fluids. 00 psi (0. MPa, bar) Maximum Air Inlet Pressure 00 psi (. MPa, bar) Maximum Fluid
More informationMerkur Displacement Pump
Repair/Parts Merkur Displacement Pump 32792G EN For use with high-performance finishing and coating pumps in hazardous and non-hazardous locations. For professional use only. Important Safety Instructions
More informationParts. Ultra Max 1595 and Mark V Airless Paint Sprayers F psi (227 bar, 22.7 MPa) Maximum Working Pressure
Parts Ultra Max 1595 and Mark V Airless Paint Sprayers 309268F 3300 psi (227 bar, 22.7 MPa) Maximum Working Pressure Type Series Model Vac Ultra Max 1595 A 245048 245099 230 100 120 (Japan/Taiwan) Mark
More information3300 psi (228 bar, 22.8 MPa) Maximum Working Pressure Related manuals. Vac Make Model * * * Ultra A A A
Parts Ultra 395/495/595 Ultra Max II 490/495/595 3300 psi (228 bar, 22.8 MPa) Maximum Working Pressure Related manuals 309707L Vac Make Model * * * 230 Ultra 395 234180 9589 B Ultra 495 234183 A 234181
More informationPump/Manifold Kits. Instructions F ENG. To convert E-Flo 4-Ball Piston Pumps to a different size lower. For professional use only.
Instructions Pump/Manifold Kits 311611F ENG To convert E-Flo 4-Ball Piston Pumps to a different size lower. For professional use only. See page 2 for a list of available kits. Important Safety Instructions
More information15H882 Slider Bearing Kit
Instructions 15H882 Slider Bearing Kit 311616D ENG To replace slider bearings on E-Flo 4-Ball Piston Pumps. For professional use only. Important Safety Instructions Read all warnings and instructions in
More informationINSTRUCTIONS PARTS LIST
INSTRUCTIONS PARTS LIST 30812 This manual contains important warnings and information. READ AND RETAIN FOR REFERENCE See manual 308393 for complete gun washer warnings and instructions. Rev. B AIR SPRAY
More informationParts. Ultimate NOVAt 395 Ultimate Super NOVAt 495/595 Ultimate MX II 490/495/ R 120 VAC
Parts Ultimate NOVAt 395 Ultimate Super NOVAt 495/595 Ultimate MX II 490/495/595 309704R EN 3300 psi (228 bar, 22.8 MPa) Maximum Working Pressure 0 VAC Ultimate Stand Series Lo-boy Series Hi-boy Series
More informationPressure Roller with 24-inch Fixed Extension - For application of architectural paints and coatings -
Instructions Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions. 311082D Pressure Roller with 24-inch Fixed Extension - For application of architectural
More informationOld Proportioning Pumps
Repair - Parts Old Proportioning Pumps 311391F For proportioning pumps on Gusmer and Old Graco H-25 and H-XP2 Hydraulic Proportioners. Important Safety Instructions Read all warnings and instructions in
More informationPressurized oil drain for collection of used lubricants and anti-freeze.
Instructions - Parts List 24-Gallon (90-Liter) Oil Ace 30864B Pressurized oil drain for collection of used lubricants and anti-freeze. Model 9577 Series A 8 psi (55 kpa,5 bar) Maximum Working Pressure
More informationModel , Series A 9 in. (23 cm) roller frame with 45 angle and 12 in. reach 1/2 in. (13 mm) nap roller cover
Operating Instructions 309899 Rev. A This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. INSTRUCTIONS Manufactured by Model 246818, Series A 9 in. (23 cm) roller frame
More informationAirless Paint Sprayers. Ultra Max 695t. Ultra 695t GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN
PARTS 309252H Airless Paint Sprayers 3300 psi (227 bar, 22.7 MPa) Maximum Working Pressure Ultra Max 695t Type Series Hi-boy Lo-boy Spray Gun 695t B 245001 245003 243282 695t B 245000 245002 None Ultra
More informationIntegrated and 2-Button Interlock Air Controls for use with Supply Systems.
Instructions-Parts Air Controls 312374A Integrated and 2-Button Interlock Air Controls for use with Supply Systems. Important Safety Instructions Read all warnings and instructions in this manual. Save
More informationStainless Steel Air Motor Conversion Kits
Instructions Stainless Steel Air Motor Conversion Kits 096B Conversion Kit 650 For 00 Pumps Conversion Kit 65 For 590 Pumps Conversion Kit 65 For 50 Pumps Model 650 Model 65 Model 65 Graco Inc. P.O. Box
More informationPARTS. 190ES , A, B, C (Stand) , A, B (Stand) , A, B (Hi-boy) , A, B (Hi-boy) Airless Paint Sprayers. Rev.
PARTS 190ES 232900, A, B, C (Stand) 232901, A, B (Stand) 233797, A, B (Hi-boy) 233815, A, B (Hi-boy) Airless Paint Sprayers 309064 Rev. G 3000 psi (207 bar, 20.7 MPa) Maximum Working Pressure Related manuals
More informationCleaning System. Instructions/Parts A
Instructions/Parts Cleaning System 310623A 234533 For use with Multi-Orifice Linear Streaming Applicator (MOLSA) to apply automotive Liquid Applied Sound Deadener (LASD) materials. 100 psi (0.68 MPa, 6.8
More informationElectronic Pulse Meters
Instructions - Parts List Electronic Pulse Meters 308245P EN For use with petroleum-based lubricants only. 1500 psi (10.3 MPa, 103 bar) Maximum Working Pressure EFC (Electronic Fluid Commander): Model
More informationPARTS ST , A, B STX , A, B. Airless Paint Sprayers. Rev. B
PARTS ST 234127, A, B 309715 Rev. B STX 234126, A, B Airless Paint Sprayers 3000 psi (207 bar, 20.7 MPa) Maximum Working Pressure Related manuals ti5875a 234127....... 309710....... 309060; ST....... 309053;
More informationMechanical Pulse Meter
Instructions Parts List Mechanical Pulse Meter Part No. 215474 Measures in pints, quarts, and gallons 308847D Part No. 215475 Measures in liters For antifreeze or oil. Sends 10 pulses per quart (11 pulses
More informationParts. Ultra 395/495/ Rev. E psi (228 bar, 22.8 MPa) Maximum Working Pressure. Vac. Related manuals. ti3254a
Parts Ultra 395/495/595 309707 Rev. E 3300 psi (228 bar, 22.8 MPa) Maximum Working Pressure Vac 395 234180 0 495 234183 234181 234182 595 8660 234439 100 495 234186 233974 Related manuals 234180 ti3254a.......
More informationOld Seal Kits. Instructions - Parts B. Piston Seal Kits, see page 2. Cylinder Seal Kits for A-Side Pumps, see page 2
Instructions - Parts Old Seal Kits 32348B To replace proportioning pump piston seal sets or cylinder seal sets used on Gusmer and Old Graco H-25 and H-XP2 Hydraulic Proportioners. Important Safety Instructions
More informationPro Shot Grease Dispense Valve
Instructions Parts List Pro Shot Grease Dispense Valve 309032J For high pressure grease dispense. 8000 psi (55 MPa, 552 bar) Maximum Working Pressure Model No. 242055, Series B, 1/4 npt Fluid Inlet Model
More informationInstructions 3A4793B EN. See page 3 for a complete list of model descriptions and part numbers.
Instructions Variable Frequency Drives 3A4793B EN Variable frequency drives (VFDs) to power and control electric motor driven agitators. For professional use only. Not approved for use in explosive atmospheres
More informationField Sensitive Magnetic Proximity Cycle Switch
Instructions Field Sensitive Magnetic Proximity Cycle Switch 3A0884A EN Bulletin 15600 4-pin micro FSM proximity switch use with MX, MXP & MGO Valve sections. Dry contact, ceramic magnet proximity switch
More informationLow Pressure Fluid Filters
Instructions - Parts List Low Pressure Fluid Filters 311775D EN For filtering large volumes of industrial paints and other industrial fluids. For professional use only. See page 3 for model numbers. 500
More information4:1 Fusion Static Mixer Kit
Instructions-Parts 4:1 Fusion Static Mixer Kit 1294A For use with 4:1 ratio material and Graco Fusion MP gun only. Not for use in explosive atmospheres. 500 psi (24.5 MPa, 245 bar) Maximum Fluid Working
More informationLubricator Gun: 10,000 psi (700 bar) Maximum Delivery Pressure when disconnected from Dispenser
INSTRUCTIONS-PARTS LIST 30 455 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. Rev. C Supercedes B Hand-Operated Portable Grease Dispenser Buckshot Luber
More informationVertical Hydraulic Driver
Repair-Parts Vertical Hydraulic Driver 3A001C EN For use with a vertically mounted proportioning pump. For professional use only. D30 - Vertical Hydraulic Driver 100 psi (8. MPa, 8.7 bar) Maximum Working
More informationAquaMax 2330E, 2335E Pressure Washer
Spare Part List AquaMax 0E, E Pressure Washer AA Eng -For high pressure water cleaning- PROVEN QUALITY. LEADING TECHNOLOGY. Table of Contents AquaMax 0 E and E Cabinet... Frame... Motor... Motor suspension...
More informationSplit Manifold Kits. Installation - Parts List D. Converts Huskyt 307 Diaphragm Pump to dual fluid inlet or outlet
Installation - Parts List Split Manifold Kits 0849D Converts Huskyt 07 Diaphragm Pump to dual fluid inlet or outlet Part No. 2720 For Husky 07 Polypropylene Pumps Part No. 272 For Husky 07 cetal Pumps
More informationLUBRICATOR GUN INSTRUCTIONS-PARTS LIST. 10,000 psi (700 bar) Maximum Delivery Pressure. Detachable-type
INSTRUCTIONS-PARTS LIST 306 460 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. Rev. E Supercedes D Detachable-type LUBRICATOR GUN 10,000 psi (700 bar)
More informationTexture Gun & Hopper B
Operation and Parts Texture Gun & Hopper 309584B For Water-Based Materials Only Model 245924 100 psi (7 bar, 0.7 MPa) Maximum Working Air Pressure 60 psi (4.1 bar, 0.41 MPa) Maximum Working Fluid Pressure
More informationSplit Manifold Kits. Installation Parts List C. Converts Husky 307 Diaphragm Pump to dual fluid inlet or outlet
Installation Parts List Split Manifold Kits 0849C Converts Husky 07 Diaphragm Pump to dual fluid inlet or outlet Part No. 2720 For Husky 07 Polypropylene Pumps Part No. 272 For Husky 07 cetal Pumps Important
More informationHorizontal Hydraulic Driver
Repair-Parts Horizontal Hydraulic Driver 3A000A ENG For use with two horizontally mounted proportioning pumps. For professional use only. Not for use in explosive atmospheres. 5877 - Horizontal Hydraulic
More informationTexture Gun & Hopper
Operation and Parts Texture Gun & Hopper 309584H - For Water-Based Materials Only - Model 245924 Series A, B, and C 100 psi (7 bar, 0.7 MPa) Maximum Working Air Pressure 60 psi (4.1 bar, 0.41 MPa) Maximum
More informationRepair D EN. Displacement Pump. Model , Series A 190ES/ 210ES, 190LTS/210LTS Pro 230ES, Pro 270ES Pro 270GS
Repair Displacement Pump 312015D EN Model 255198, Series A 190ES/ 210ES, 190LTS/210LTS Pro 230ES, Pro 270ES Pro 270GS Maximum Working Pressure 3300 psi (223 bar, 23 MPa) Important Safety Instructions Read
More informationFuel Meter. Instructions - Parts List. Contents B. Model , measures in gallons Model , measures in liters. For metering fuels.
Instructions - Parts List Fuel Meter 311309B For metering fuels. 80 psi (0.55 MPa, 5.5 bar) Maximum Working Pressure Model 260405, measures in gallons Model 260414, measures in liters Important Safety
More informationINSTRUCTIONS PARTS LIST This manual contains important warnings and information. READ AND RETAIN FOR REFERENCE
INSTRUCTIONS PARTS LIST 308 493 This manual contains important warnings and information. READ AND RETAIN FOR REFERENCE Rev. A Second Gun Hose Kit 100 psi (6.9 bar) Maximum Working Pressure These kits include
More informationSpray Nozzle Adapters
INSTRUCTIONS-PARTS LIST 306 788 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. First choice when quality counts. Rev. G Supersedes Rev. F DIRECTIONAL
More informationModel For petroleum products and other fluids compatible with aluminum and buna-n seals.
Instructions - Parts List Piston Hand Pump 311308C Model 260407 For petroleum products and other fluids compatible with aluminum and buna-n seals. Model 260406 For herbicides and other chemicals or fluids
More informationDisplacement Pump. Instructions C EN. Model psi (3.7 MPa, 37 bar) Maximum Working Pressure 12 gpm Flow Rate
Instructions Displacement Pump 308486C EN For use with petroleum-based lubricants only. For professional use only. Model 237527 540 psi (3.7 MPa, 37 bar) Maximum Working Pressure 12 gpm Flow Rate Important
More informationElevators and Pump Supports
Instructions Parts List Elevators and Pump Supports 306287V Used to raise and lower select Graco circulation and supply pumps. For professional use only. 200 psi (.4 MPa, 4 bar) Maximum Air Input Pressure
More informationHose Heat Control Kit
Instructions - Parts 248921 Hose Heat Control Kit 310798D For monitoring and controlling fluid temperature in low voltage heated hose. Not for use in explosive atmospheres. Important Safety Instructions
More informationRS Gun Front Adapter Kits
Kit Instructions RS Gun Front Adapter Kits 332520A EN For adapting the internal mix gun for specific field applications. For professional use only. Important Safety Instructions Read all warnings and instructions
More informationProportioning pumps and hydraulic cylinders used on Hydraulic Proportioners. Model : 2000 psi (13.8 MPa, 138 bar) Maximum Working Pressure
- Parts Proportioning Pumps 3068F Proportioning pumps and hydraulic cylinders used on Hydraulic Proportioners. Important Safety Instructions Read all warnings and instructions in this manual and in manuals
More informationPROVEN QUALITY, LEADING TECHNOLOGY
Instructions Parts List Fluid Outlet Filter 303Z For filtering of finishing materials. For professional use only. Important Safety Instructions Read all warnings and instructions in this manual. Save these
More informationProportioning Pumps. Repair - Parts M EN
- Parts Proportioning Pumps 3068M EN Proportioning pumps and hydraulic cylinders used on Hydraulic Proportioners. For professional use only. For professional use only. Not for use in explosive atmospheres.
More informationAir Control Kit INSTRUCTIONS-PARTS LIST. Table of Contents HIGH VOLUME. 250 psi (1.7 MPa, 17.2 bar) Maximum Air Inlet Pressure
INSTRUCTIONS-PARTS LIST INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. 308 648 Rev. B Supersedes A HIGH VOLUME Air Control Kit 250 psi (.7 MPa, 7.2 bar)
More informationParts / Spares Reference Sheet
Parts / Spares Reference Sheet Graco GH200 Sprayer Models Sprayer Models GH30 GH200 GH230 GH300 20 Vac 60 Hz ETL/CSA/UL 20 Vac 60 Hz 253957 253959 253980 253962 253963 25398 255095 253965 253966 253982
More informationAir Actuated Dispense Valve
Instructions-Parts Air Actuated Dispense Valve 312782D EN To dispense plural component fluids and solvents. For professional use only. Part No. 15X303 High Pressure Dispense Valve 3000 psi (21 MPa, 207
More informationProMix Auto Color and Catalyst Change Kits
Installation - Parts ProMix Auto Color and Catalyst Change Kits 311396C EN For proportional mixing of plural component coatings. For professional use only. See page 2 for kit information. Important Safety
More informationAir Regulator 100 psi (.7 MPa, 7 bar) Maximum Air Inlet Pressure
INSTRUCTIONS-PARTS LIST INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. First choice when quality counts. 30934 Rev. A Air Regulator 00 psi (.7 MPa, 7
More informationAir Actuated Dispense Valve
Instructions-Parts Air Actuated Dispense Valve 312782B To dispense plural component fluids and solvents. Part No. 15X303 High Pressure Dispense Valve 3000 psi (21 MPa, 210 bar) Maximum Fluid Working Pressure
More informationParts Drawing - Ultra Stand Sprayers
Parts / Spares Reference Sheet Graco UltraMax 395 Parts Drawing - Ultra Stand Sprayers Ultra 395 2339, A, B Ultra 495 233966, A 53 63 23 66 65 69 54 17 77 9 1 44 25 42 20 Ref 2 16 38 3 PARTS, PAGE 8 8
More informationAir Control Kits INSTRUCTIONS-PARTS LIST. Table of Contents HIGH VOLUME. 250 psi (1.7 MPa, 17.2 bar) Maximum Air Inlet Pressure
INSTRUCTIONS-PARTS LIST INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. 308 722 Rev. A HIGH VOLUME Air Control Kits 250 psi (.7 MPa, 7.2 bar) Maximum
More informationInstructions-Parts 3A2801G. See page 2 for model part numbers, maximum fluid working pressure, and approvals.
Instructions-Parts Mix Manifold Kit 3A2801G EN For at-the the-gun mixing of 2 component materials when used with a ProMix PD2K Proportioner. For professional use only. Important Safety Instructions Read
More information3600 psi (250 bar, 24.8 MPa) Maximum Working Pressure Model , Series A Ultra Max II and Ultimate Mx II 695 and 795
Repair Displacement Pump 310643H 3600 psi (250 bar, 24.8 MPa) Maximum Working Pressure Model 248204, Series A Ultra Max II and Ultimate Mx II 695 and 795 Model 248205, Series A Ultra Max II and Ultimate
More informationSingle Acting and Double Acting Paint Spray Guns for RoadLazer RoadPak Line Striping System
Instructions Single Acting and Double Acting Paint Spray Guns for RoadLazer RoadPak Line Striping System 308613H EN - For the application of road marking paints and coatings - - For professional use only
More informationWater Sandblaster Kit
a Instructions - Parts List Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions. Water Sandblaster Kit 308544 - For suction fed injection of sand into
More informationRoadLazer Skid-Mount OEM Striping Package
RoadLazer Skid-Mount OEM Striping Package - For OEM use in customized line striper applications only - 310664D EN Model 234672 Hydraulic Stainless Steel 2000 psi (138 bar) Maximum Working Pressure Read
More informationThermoLazer Pavement Marking System A
ThermoLazer Pavement Marking System 313880A - For professional application of thermoplastic traffic marking compound materials (reflective beads applied simultaneously with screeding) - - For outdoor use
More informationDisplacement Pump. Repair-Parts. Contents D ENG. Part No psi (13.8 MPa, 138 bar) Maximum Working Pressure
Repair-Parts Displacement Pump 313383D ENG For use with polyurethane foam, polyurea, and similar non-flammable material. For professional use only. Not for use in explosive atmospheres. Part No. 257344
More informationDisplacement Pump INSTRUCTIONS-PARTS LIST psi (250 bar, 24.8 MPa) Maximum Working Pressure Model , Series A. Model , Series A
INSTRUCTIONS-PARTS LIST 309277 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. First choice when quality counts. Rev. B Displacement Pump 3600 psi (250
More informationPRO ES Test Fixture, High Voltage Test Probe, & KV Meter
INSTRUCTIONS PARTS LIST 308 217 This manual contains important warnings and information. READ AND RETAIN FOR REFERENCE Rev. B Supersedes A PRO ES Test Fixture, High Voltage Test Probe, & KV Meter To Test
More informationSaniForce Air Motors. Instructions/Parts 3A1211N
Instructions/Parts SaniForce Air Motors 3A2N EN For use on SaniForce piston pumps, which are used to transfer medium to high viscosity fluids in applications requiring high sanitation. For professional
More information950SeriesSealantGun. Instructions-Parts D. Models Palm Grip Gun: Pistol Grip Gun: ENG
Instructions-Parts 950SeriesSealantGun 309968D ENG For dispensing sealant from caulking tubes. For professional use only. Important Safety Instructions Read all warnings and instructions in this manual.
More informationStainless Steel 1000cc Lower
Instructions - Parts List Stainless Steel 1000cc Lower 311716C ENG Designed for low to medium pressure, medium volume circulation of finishing materials. For professional use only. Not approved to European
More informationZip-Tex Spray Gun. Instructions A. Model psi (0.86 MPa, 8.6bar) Maximum Working Pressure
Instructions Zip-Tex Spray Gun 311159A - For water-based materials only - (Consult your material supplier for Warnings and Application Requirements) Model 249458 125 psi (0.86 MPa, 8.6bar) Maximum Working
More informationDisplacement Pump 3600 psi (250 bar, 24.8 MPa) Maximum Working Pressure Model , Series A
INSTRUCTIONS-PARTS LIST 308798 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. First choice when quality counts. Rev. U Displacement Pump 3600 psi (250
More information310820H EN. 390 Electric Airless Sprayers. Operation. - For portable spray applications of architectural paints and coatings - Hi-Boy ProStep
Operation 390 Electric Airless Sprayers 310820H EN - For portable spray applications of architectural paints and coatings - 3300 psi (227 bar, 22.7 MPa) Maximum Working Pressure Important Safety Instructions
More informationPR70 and PR70v Integrated Heat
Instructions - Parts PR70 and PR70v Integrated Heat 312761B For controlling material temperature in heated tanks and hoses. Models LC0250, LC0251, LC0252, LC0253 Important Safety Instructions Read all
More informationInstructions Parts List
Instructions Parts List WITH OR WITHOUT ELECTRONIC METERS V5 V12 EM6 and EM12Dispense Valves 308642N For dispense of petroleum and synthetic based oils. 1500 psi (10 MPa, 102 bar) Maximum Working Pressure
More informationOperation. GMAX II 3900/5900/5900HD/5900 Convertible/7900 TexSpray 5900HD Convertible/7900HD Airless Sprayers 3A0242B
Operation GMAX II 3900/5900/5900HD/5900 Convertible/7900 TexSpray 5900HD Convertible/7900HD Airless Sprayers - For Portable Airless Spraying of Architectural Coatings and Paints - 3300 psi (22.8 MPa, 228
More informationFast-Flo Air Motor 12.5 bar (1.25 MPa, 180 psi) Maximum Air Working Pressure
03652 Instructions Parts List Fast-Flo Air Motor 12.5 bar (1.25 MPa, 180 psi) Maximum Air Working Pressure 307456S Model 215963, Series A 101.6 mm (4 in.) stroke NOTE: To replace Air Motor 215963, order
More informationDisplacement Pump 3600 psi (250 bar, 24.8 MPa) Maximum Working Pressure Model , Series A
INSTRUCTIONS-PARTS LIST 309277 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. First choice when quality counts. Rev. M Displacement Pump 3600 psi (250
More informationFinishPro HVLP 7.0/9.0/9.5
Operation, Repair, Parts FinishPro HVLP 7.0/9.0/9.5 313406L EN For portable spray applications of fine finish coatings. For professional use only. Not approved for use in European explosive atmosphere
More informationRAZOR Siphon Feed Gun
Instructions - Parts List RAZOR Siphon Feed Gun 312106G EN A premier gun for the automotive refinish market for use with thin to medium viscosity materials (14-20 seconds Zahn #2 cup). If spraying heavier
More informationGRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN
REPAIR J Line Driver Model 233725 U.S. Patent Number 6,883,633 Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions. 10 mph (16 kph) Maximum Operating
More informationMerkur Spray Packages
Instructions - Parts List Merkur Spray Packages 309463N Important Safety Instructions Read all warnings and instructions in this manual. Save these instructions. TI20A TI202A TI203A II 2 G Contents Manual
More informationDisplacement Pump Used in the Ultra Max 695 Sprayers 3000 psi (207 bar, 21 MPa) MAXIMUM WORKING PRESSURE
INSTRUCTIONS-PARTS LIST INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. 308815 Rev. J Displacement Pump Used in the Ultra Max 695 Sprayers 3000 psi (207
More informationPower-Lock Heated Hose
Instructions - Parts Power-Lock Heated Hose 309572M For use with plural component proportioners. Not for use in explosive atmospheres. See page 3 for Maximum Fluid Working Pressure 130 psi (0.9 MPa, 9
More information