Professional Grade Agricultural Pumps.

Size: px
Start display at page:

Download "Professional Grade Agricultural Pumps."

Transcription

1 Professional Grade Agricultural Pumps. spro 1

2 Delavan knows what HD Magnum PowerFLO PowerMAX 2

3 you need out of a pump. Turbo-90 RollerPRO 3

4 Sizing, Selection & Plumbing Diagrams How to Determine Pump Capacity for Your Sprayer Pump Capacity (GPM): Boom Requirement (GPM) + Agitation Requirement (GPM) Boom Requirement (GPM): Number of nozzles x flow rate per nozzle (GPM at desired PSIG) Agitation Requirement (GPM): 5% of total tank volume if using liquids; 10% if using wettable powders Example: A boom with extended range tips (0.40 GPM at 40 PSIG) and a 200 gallon tank with tank agitation. Pump Capacity = (17 x 0.40) + (5% of 200) Pump Capacity = Pump Capacity = 16.8 GPM See individual product specification pages for complete performance information. Please contact your Delavan Sales Agent or the factory if you need assistance in sizing a roller pump to your application. For high volume orders, customized units are available consult factory. Use the pump flow charts to select the appropriate size roller pump based on your speed and pressure. Selection Considerations 1. All Delavan Series are available in Cast Iron and Stainless Steel Diamond Series. Choose the pump body material to meet your application s chemical compatibility and durability requirements. 2. Determine application requirements for: Flow (GPM) Pressure (PSIG) RollerPro Plumbing Diagram 1 Drive method (PTO, gas engine or electric motor) Package dimensions and plumbing 3. Refer to the individual product specification pages to select the pump best suited to the application and for complete performance and technical data. spro Tank Agitator Anti-Vortex Fitting Agitation Line Ball Valve Electric Boom Control Valves Pressure Gauge 4 1-Copyright 2008 Delavan Pumps Inc. Unauthorized use prohibited

5 spro The Only Field-Serviceable Pump on the Market Only tool required to service RollerPro pump is a wrench Pump remains mounted on drive shaft, no plumbing disassembly required Complete roller replacements takes about 3 minutes Easy field-service repair: 1. Loosen and remove the four bolts on end plate of pump and slide off 2. Replace rollers (and rotor if needed) 3. Slide on end plate, tighten bolts and go! No reduction in pump performance Competitively priced How a Works The pump shaft is driven by a PTO, gas engine or electric motor A constant supply of fluid enters the inlet side of the pump (Note: roller pumps cannot be operated dry!) As the shaft and rotor assembly turns, rollers push the fluid through the pump housing to the outlet side of the pump The volume of flow is determined by several factors including: PTO speed, operating pressure, size of the pump and the size and number of rollers 5

6 FPO

7 spro Performance and engineering that keeps you in the field. The Delavan 8900 Series Stainless Steel Roundup Ready Removable end plate enables field servicing. You can replace rollers on the spot no shop service necessary! Ultra rollers are standard for improved performance, longer life and smoother operation. Glass-filled polypropylene rollers are optional. Heavy duty stainless steel rotor with an overcoat of high performance composite increases efficiency and pump life. Stainless steel heavy duty shaft assembly with an extra-fine finish minimizes seal wear. Viton seal rings provide a positive seal between the end plate and pump body. Heavy duty, permanently sealed bearings at the front and rear of the shaft. Roundup is a registered trademark of Monsanto Company 7

8 Models: 4-s 4900C 9.2 GPM Pump / Cast Iron 5 /8 in. Solid Shaft, CW Rotation 4901C 9.2 GPM Pump / Cast Iron 1 /2 in. Hollow Shaft, CW Rotation 4900 PRO Specifications: Pump Type: 4-roller design Max Pressure: 150 PSI (10.5 bar) Max Recommended Temperature: 140 F (60 C) Port Size: 3 4 NPT (female) Mounting: Base Mounted: UNC-2B (2 holes) PTO: Use torque bar and chain Shaft: Size: 4900: 5 8 solid shaft 4901: 1 2 hollow shaft Rotation: CW (standard) (Shaft rotation is determined when looking at shaft end of pump) Weight: 5 lbs (11 kg) GPM - 4-Roller design PSI Max RPM Max. - Port Size: Materials of Construction Housing: Cast Iron Rollers: 1 2 Ultra rollers (standard) Polypropylene (optional) Shaft Seals: Viton cartridge type lip seals Seal Ring: Viton Shaft & Rotor: Extra-fine finish 404 SST Bearings: Permanently-lubricated, heavy-duty sealed bearings Flow (GPM) at Specified Pressure and Speed PSI 1800 RPM 2200 RPM 2600 RPM in. NPT (female) - Rotation: CW (standard) 5 8 Dia. Shaft with 9 16 flat NPT (2 ports) 4.69 (119) - Housing: Cast Iron 1.75 (44) 1.81 (46) 0.58 (15) 3.0 (76) 3.88 (98) 0.69 (17) UNC-2B (4 holes) 1.0 (25) 4900C Cast Iron Pump with Side Ports Shaft rotation is determined when looking at shaft end of pump. 8

9 4900 PRO Models: 4-s 4900DSS 9.2 GPM Pump / Stainless Steel 5 8 in. Solid Shaft, CW Rotation 4901DSS 9.2 GPM Pump / Stainless Steel 1 2 in. Hollow Shaft, CW Rotation Specifications: Pump Type: 4-roller design Max Pressure: 150 PSI (10.5 bar) Max Recommended Temperature: 140 F (60 C) Port Size: 3 4 NPT (female) Mounting: Base Mounted: UNC-2B (2 holes) PTO: Use torque bar and chain Shaft: Size: 4900: 5 8 solid shaft 4901: 1 2 hollow shaft Rotation: CW (standard) (Shaft rotation is determined when looking at shaft end of pump) Weight: 5 lbs (11 kg) Roundup Ready GPM - 4-Roller design PSI Max RPM Max. - Port Size: 3 4 in. NPT (female) Materials of Construction Housing: Stainless Steel Rollers: 1 2 Ultra rollers (standard) Polypropylene (optional) Shaft Seals: Viton cartridge type lip seals Seal Ring: Viton Shaft & Rotor: Extra-fine finish 416 SST Bearings: Permanently-lubricated, heavy-duty sealed bearings Flow (GPM) at Specified Pressure and Speed PSI 1800 RPM 2200 RPM 2600 RPM Rotation: CW (standard) 5 8 Dia. Shaft with 9 16 flat NPT (2 ports) 4.69 (119) - Housing: Stainless Steel 1.75 (44) 1.81 (46) 0.58 (15) 3.0 (76) 3.88 (98) 0.69 (17) UNC-2B (4 holes) 1.0 (25) Roundup is a registered trademark of Monsanto Company 4900DSS Stainless Steel Diamond Series Pump with Side Ports Shaft rotation is determined when looking at shaft end of pump. 9

10 Models: 5-s 5900C 46.5 GPM Pump / Cast Iron 5900C-R 46.5 GPM Pump / Cast Iron Reverse Rotation 5900 PRO Specifications: Pump Type: 5-roller design Max Pressure: 200 PSI (14 bar); 100 PSI (7 bar) for continuous duty at 850 RPM and higher Max Recommended Temperature: 140 F (60 C) Port Size: 1 NPT (female) Mounting: Base Mounted: UNC-2B (2 holes) PTO: Use torque bar and chain Shaft: Size: solid shaft Rotation: CCW (standard), CW (optional) (Shaft rotation is determined when looking at shaft end of pump) Weight: 19 lbs (41.8 kg) Materials of Construction Housing: Cast Iron Rollers: 1 Ultra rollers (standard) Polypropylene (optional) Shaft Seals: Viton cartridge type lip seals Seal Ring: Viton Shaft & Rotor: Extra-fine finish 404 SST Bearings: Permanently-lubricated, heavy-duty sealed bearings GPM - 5-Roller design PSI Max RPM Max. - Port Size: Flow (GPM) at Specified Pressure and Speed PSI 540 RPM 850 RPM 1000 RPM in. NPT (female) - Rotation: Dia. Shaft with 1 4 keyway 1" FNPT (2 ports) 8.38 (213) CCW (standard) CW (optional) - Housing: 3.38 (86) Cast Iron 1.75 (44) 3.94 (100) 4.94 (125) 1.13 (29) UNC-2B (4 holes) 2.13 (54) 5900C Cast Iron Pump with Side Ports Shaft rotation is determined when looking at shaft end of pump. 10

11 5900 PRO Models: 5-s 5900DSS 46.5 GPM Pump / Stainless Steel 5900DSS-R 46.5 GPM Pump / Stainless Steel Reverse Rotation Specifications: Pump Type: 5-roller design Max Pressure: 200 PSI (14 bar); 100 PSI (7 bar) for continuous duty at 850 RPM and higher Max Recommended Temperature: 140 F (60 C) Port Size: 1 NPT (female) Mounting: Base Mounted: UNC-2B (2 holes) PTO: Use torque bar and chain Shaft: Size: solid shaft Rotation: CCW (standard), CW (optional) (Shaft rotation is determined when looking at shaft end of pump) Weight: 19 lbs (41.8 kg) Roundup Ready GPM - 5-Roller design PSI Max RPM Max. Materials of Construction Housing: Stainless Steel Rollers: 1 Ultra rollers (standard) Polypropylene (optional) Shaft Seals: Viton cartridge type lip seals Seal Ring: Viton Shaft & Rotor: Extra-fine finish 416 SST Bearings: Permanently-lubricated, heavy-duty sealed bearings Flow (GPM) at Specified Pressure and Speed PSI 540 RPM 850 RPM 1000 RPM Port Size: 1 in. NPT (female) - Rotation: Dia. Shaft with 1 4 keyway 1" FNPT (2 ports) 8.38 (213) CCW (standard) CW (optional) - Housing: 3.38 (86) Stainless Steel 1.75 (44) 3.94 (100) 4.94 (125) 1.13 (29) UNC-2B (4 holes) 2.13 (54) Roundup is a registered trademark of Monsanto Company 5900DSS Stainless Steel Diamond Series Pump with Side Ports Shaft rotation is determined when looking at shaft end of pump. 11

12 6900 PRO Models: 6-s 6900C 19.6 GPM Pump / Cast Iron 6900C-R 19.6 GPM Pump / Cast Iron Reverse Rotation 6601C 19.6 GPM Pump / Cast Iron with Rear Ports (Not Field Serviceable) DPK-6900C 19.6 GPM Pump / Cast Iron #90200 Coupler and Torque Arm Kit Specifications: Pump Type: 6-Roller design Max Pressure: 300 PSI (21 bar) Max Recommended Temperature: 140 F (60 C) Port Size: ¾ NPT (female) 6900: Side Ports 6601: Rear Ports - Non Field Serviceable Mounting: Base Mounted: UNC-2B (2 holes) PTO: Use torque bar and chain Shaft: Size: 5 8 solid shaft Rotation: CCW (standard); CW (optional) (Shaft rotation is determined when looking at shaft end of pump) Weight: 9 lbs (19.8 kg) GPM - 6-Roller design PSI Max RPM Max. - Port Size: 3 4 in. NPT (female) - Rotation: CCW (standard) CW (optional) - Housing: Cast Iron 1.25 (32) Materials of Construction Housing: Cast Iron Rollers: 6900 Series: 3 4 Ultra rollers (standard) 6601C: Ultra Rollers (standard) or 3 4 Polypropylene (optional) Shaft Seals: Viton cartridge type lip seals Seal Ring: Viton Shaft & Rotor: Extra fine finish 404 SST Bearings: Permanently-lubricated, heavy-duty sealed bearings Flow (GPM) at Specified Pressure and Speed 5 8 Dia. Shaft with 9 16 flat 1.97 (50) 1.94 (49) PSI 540 RPM 1000 RPM 1200 RPM (2 ports) NPT 3.13 (79) 2.41 (61) UNC (2 holes) 6.0 (152) 4.5 (114) 2.13 (54) C Cast Iron Pump with Rear Ports (Cast Iron Only) Shaft rotation is determined when looking at shaft end of pump.

13 6900 PRO Models: 6-s 6900DSS 19.6 GPM Pump / Stainless Steel 6900DSS-R 19.6 GPM Pump / Stainless Steel Reverse Rotation DPK-6900DSS 19.6 GPM Pump / Stainless Steel #90200 Coupler and Torque Arm Kit Specifications: Pump Type: 6-Roller design Max Pressure: 300 PSI (21 bar) Max Recommended Temperature: 140 F (60 C) Port Size: ¾ NPT (female) Side Ports Mounting: Base Mounted: UNC-2B (2 holes) PTO: Use torque bar and chain Shaft: Size: 5 8 solid shaft Rotation: CCW (standard); CW (optional) (Shaft rotation is determined when looking at shaft end of pump) Weight: 9 lbs (19.8 kg) Roundup Ready GPM - 6-Roller design PSI Max RPM Max. - Port Size: 3 4 in. NPT (female) Materials of Construction Housing: Stainless Steel Rollers: 3 4 Ultra rollers (standard) Polypropylene (optional) Shaft Seals: Viton cartridge type lip seals Seal Ring: Viton Shaft & Rotor: Extra-fine finish 416 SST Bearings: Permanently-lubricated, heavy-duty sealed bearings Flow (GPM) at Specified Pressure and Speed PSI 540 RPM 1000 RPM 1200 RPM Rotation: CCW (standard) CW (optional) - Housing: Stainless Steel 5 8 Dia. Shaft with 9 16 flat 3.13 (79) 2.41 (61) 6.0 (152) (32) (50) UNC (2 holes) (51) (100) (2 ports) NPT Roundup is a registered trademark of Monsanto Company 6900C Cast Iron Pump with Side Ports 6900DSS Stainless Steel Diamond Series Pump with Side Ports Shaft rotation is determined when looking at shaft end of pump. 13

14 7900 PRO Models: 7-s 7900C 22.5 GPM Pump / Cast Iron 7900C-R 22.5 GPM Pump / Cast Iron Reverse Rotation Specifications: Pump Type: 7-roller design Max Pressure: 200 PSI (14 bar) Max Recommended Temperature: 140 F (60 C) Port Size: 1 NPT (female) Mounting: Base Mounted: UNC-2B (2 holes) PTO: Use torque bar and chain Shaft: Size: solid shaft Rotation: CCW (standard); CW (optional) (Shaft rotation is determined when looking at shaft end of pump) Weight: 14 lbs (30.8 kg) Materials of Construction Housing: Cast Iron Rollers: 3 4 Ultra rollers (standard) Polypropylene (optional) Shaft Seals: Viton cartridge type lip seals Seal Ring: Viton Shaft & Rotor: Extra-fine finish 404 SST Bearings: Permanently-lubricated, heavy-duty sealed bearings GPM - 7-Roller design PSI Max RPM Max. Flow (GPM) at Specified Pressure and Speed PSI 540 RPM 650 RPM 850 RPM Port Size: 1 in. NPT (female) - Rotation: CCW (standard) CW (optional) - Housing: Cast Iron Dia. Shaft with 1 4 Key Slot 3.75 (95) 2.78 (71) 6.25 (159) (41) (56) UNC (2 holes) (51) (111) 7900C Cast Iron Pump with Side Ports Shaft rotation is determined when looking at shaft end of pump. (2 ports) 1-12 NPT

15 7900 PRO Models: 7-s 7900DSS 22.5 GPM Pump / Stainless Steel 7900DSS-R 22.5 GPM Pump / Stainless Steel Reverse Rotation Specifications: Pump Type: 7-roller design Max Pressure: 200 PSI (14 bar) Max Recommended Temperature: 140 F (60 C) Port Size: 1 NPT (female) Mounting: Base Mounted: UNC-2B (2 holes) PTO: Use torque bar and chain Shaft: Size: solid shaft Rotation: CCW (standard); CW (optional) (Shaft rotation is determined when looking at shaft end of pump) Weight: 14 lbs (30.8 kg) Roundup Ready Materials of Construction Housing: Stainless Steel Rollers: 3 4 Ultra rollers (standard) Polypropylene (optional) Shaft Seals: Viton cartridge type lip seals Seal Ring: Viton Shaft & Rotor: Extra-fine finish 416 SST Bearings: Permanently-lubricated, heavy-duty sealed bearings GPM - 7-Roller design PSI Max RPM Max. Flow (GPM) at Specified Pressure and Speed PSI 540 RPM 650 RPM 850 RPM Port Size: 1 in. NPT (female) - Rotation: CCW (standard) CW (optional) - Housing: Stainless Steel Dia. Shaft with 1 4 Key Slot 3.75 (95) 2.78 (71) 6.25 (159) (41) (56) UNC (2 holes) (51) (111) (2 ports) 1-12 NPT Roundup is a registered trademark of Monsanto Company 7900DSS Stainless Steel Diamond Series Pump with Side Ports Shaft rotation is determined when looking at shaft end of pump. 15

16 8900 PRO Models: 8-s 8900C 24 GPM Pump / Cast Iron 8900C-R 24 GPM Pump / Cast Iron Reverse Rotation DPK-8900C 24 GPM Pump / Cast Iron #90300 Coupler and Torque Arm Kit Specifications: Pump Type: 8-roller design Max Pressure: 300 PSI (21 bar) Max Recommended Temperature: 140 F (60 C) Port Size: 1 NPT (female) Mounting: Base Mounted: UNC-2B (2 holes) PTO: Use torque bar and chain Shaft: Size: solid shaft Rotation: CCW (standard); CW (optional) (Shaft rotation is determined when looking at shaft end of pump) Weight: 14 lbs (30.8 kg) Materials of Construction Housing: Cast Iron Rollers: 3 4 Ultra rollers (standard) Polypropylene (optional) Shaft Seals: Viton cartridge type lip seals Seal Ring: Viton Shaft & Rotor: Extra-fine finish 404 SST Bearings: Permanently-lubricated, heavy-duty sealed bearings - 24 GPM - 8-Roller design PSI Max RPM Max. Flow (GPM) at Specified Pressure and Speed PSI 540 RPM 850 RPM 1000 RPM Port Size: 1 in. NPT (female) - Rotation: CCW (standard) CW (optional) - Housing: Cast Iron Dia. Shaft with 1 4 Key Slot 3.75 (95) 2.78 (71) 6.25 (159) (41) (56) UNC (2 holes) (51) (111) (2 ports) 1-12 NPT C Cast Iron Pump with Side Ports Shaft rotation is determined when looking at shaft end of pump.

17 8900 PRO Models: 8-s 8900DSS 24 GPM Pump / Stainless Steel 8900DSS-R 24 GPM Pump / Stainless Steel Reverse Rotation DPK-8900DSS 24 GPM Pump / Stainless Steel #90300 Coupler and Torque Arm Kit Specifications: Pump Type: 8-roller design Max Pressure: 300 PSI (21 bar) Max Recommended Temperature: 140 F (60 C) Port Size: 1 NPT (female) Mounting: Base Mounted: UNC-2B (2 holes) PTO: Use torque bar and chain Shaft: Size: solid shaft Rotation: CCW (standard); CW (optional) (Shaft rotation is determined when looking at shaft end of pump) Weight: 14 lbs (30.8 kg) Roundup Ready - 24 GPM - 8-Roller design PSI Max RPM Max. - Port Size: 1 in. NPT (female) - Rotation: CCW (standard) CW (optional) - Housing: Stainless Steel Roundup is a registered trademark of Monsanto Company Materials of Construction Housing: Stainless Steel Rollers: 3 4 Ultra rollers (standard) Polypropylene (optional) Shaft Seals: Viton cartridge type lip seals Seal Ring: Viton Shaft & Rotor: Extra-fine finish 416 SST Bearings: Permanently-lubricated, heavy-duty sealed bearings Flow (GPM) at Specified Pressure and Speed Dia. Shaft with 1 4 Key Slot 3.75 (95) 2.78 (71) 6.25 (159) (41) (56) UNC (2 holes) (51) (111) 8900DSS Stainless Steel Diamond Series Pump with Side Ports PSI 540 RPM 850 RPM 1000 RPM (2 ports) 1-12 NPT Shaft rotation is determined when looking at shaft end of pump. 17

18 sproaccessories RollerPRO Pump Repair Kits RollerPRO repair kits contain ultra rollers, shaft seals, seal ring, shaft key and instructions Pump Part #: RK Pump Part #: RK Pump Part #: RK Pump Part #: RK Pump Part #: RK-8900 Competitive Pump Repair Kits Universal Repair Kits * Universal repair kits contain ultra rollers, shaft seals, O-rings and instructions Pump Part #: RK 5500 Pump Part #: RK 6600 Pump Part #: RK 7000 Pump Part #: RK 8800 Pump Part #: RK * Repairs Delavan and Hypro s. For Ace, Hypro, TSC, Century and Teel Pumps. Kit includes diameter rollers and Viton seals. 6-Roller Kit Part #: Roller Kit Part #: Old Style Delavan Repair Kits Kits contain rollers, shaft seals, O-rings and instructions Pump Part #: , , , Part #: Pump Repair Kit Torque Bar and Chain The Torque Bar and Chain is needed to anchor a PTO-mounted pump to keep it from turning with the PTO shaft. Fits all Roller pumps. Part #: RollerPRO Pump Kits 6- Kit Roller pump with CCW rotation, #90200 coupler and torque arm kit. Part #: DPK-6900C Cast Iron DPK-6900DSS Stainless Steel 8- Kit Roller pump with CCW rotation, #90300 coupler and torque arm kit. Part #: DPK-8900C Cast Iron DPK-8900DSS Stainless Steel 6-Roller Cast Iron Pump Kit 18

19 Polypropylene Rollers Replacement rollers for Series 6600, 7000 and 8800 Roller Pumps fitted with polypropylene rollers. Sold individually. Consult factory for other sizes Diameter Part #: Diameter Part #: Set Screw Coupler (for 4400 s) Shaft Diameter Description Part # Compatible Pumps Pump Drive Max RPM Mild steel body with set screws Quick Couplers Quick couplers provide quick and simple on-off installation. The body is steel and the collar is durable nylon 12 that is color-coded according to international safety standards. Bore Diameter Part # PTO Shaft Tooth Body Max RPM Multi-Speed Tooth Forged Steel RPM Tooth Forged Steel RPM Tooth Die Cast Aluminum RPM Tooth Die Cast Aluminum RPM Tooth Forged Steel 1000 RPM Tooth Forged Steel 1000 RPM Tooth Forged Steel 540 RPM Tooth Forged Steel 540 RPM ¾ Tooth Forged Steel 1000 RPM 19

20 Fluid Innovation. Solid Engineering. Standard Warranty Delavan warrants PowerFLO Series Pumps for a period of one year from date of manufacture. All products sold by Delavan are warranted only to purchasers from Delavan for resale or for use in purchasers own business or original equipment manufacture, against defects in workmanship or materials under normal use, maintenance and service (rental use excluded). The sole and exclusive obligation of Delavan under this or any implied warranty shall be to replace or, at its option, to repair, without charge, any product which is determined by Delavan to be defective in workmanship or materials after the product is returned to the Delavan factory*, shipping costs prepaid. In no event shall Delavan be liable to any person for indirect or consequential damages or for injury or commercial loss resulting from any use or inability to use any Delavan product. Delavan expressly negates any other warranty, express or implied, including any warranty of merchantability or fitness for a particular purpose, or arising from any course of dealing or custom or usage of trade. No person, including any dealer or representative of Delavan, is authorized to make any representation or warranty on behalf of Delavan in addition to or inconsistent with these provisions. Purchasers to whom these provisions apply agree to hold Delavan harmless from claims by their customers in excess of the obligations of Delavan expressly set forth herein. * Important return safety instructions: When you return your pump for warranty or repair, you must always do the following: 1. Flush chemical residue from the pump (best done in the field). 2. Tag pump with type of chemicals having been sprayed. 3. Include complete description of operation problem, such as how pump was used, symptoms of malfunction, etc. Since pumps can contain residues of toxic chemicals these steps are necessary to protect all the people who handle return shipments, and to help pinpoint the reason for the breakdown. The Delavan 6900DSS Stainless Steel Diamond Series Pump Delavan Pumps, Inc Chestnut Avenue Minneapolis, MN Powerful Products for a Fluid World. Phone: Toll Free: DELAVAN Fax: Toll Free Fax: Copyright 2008 Delavan Ag Pumps Inc. Ver. 1.0_500_0608

Professional Grade Agricultural Pumps.

Professional Grade Agricultural Pumps. Professional Grade Agricultural Pumps. 1 Delavan knows what HD Magnum PowerFLO PowerMAX 2 you need out of a pump. Turbo-90 RollerPRO 3 Sizing, Selection & Plumbing Diagrams How to Determine Pump Capacity

More information

Roller Pumps & Accessories

Roller Pumps & Accessories ROLLER PUMPS Roller Pumps & Accessories Delavan Roller pumps offer flexibility in all your spraying applications, and robust enough to deliver 3-24 gallons from your PTO! Delavan roller pumps are the only

More information

Port size: 1 NPT Shaft size: 5/8 Solid or 1/2 Hollow. Pump shaft rotation: CW Standard/CCW Optional. Weight: 19 lbs. Rollers: Ultra Rollers standard

Port size: 1 NPT Shaft size: 5/8 Solid or 1/2 Hollow. Pump shaft rotation: CW Standard/CCW Optional. Weight: 19 lbs. Rollers: Ultra Rollers standard 4-, 5-, 6-, 7-, 8-Roller Pump Instruction Manual 01509-MN (Read carefully before installation and operation) GENERAL Delavan roller pumps are available with a variety of options, such as a choice of roller

More information

PowerFLO 7800 Series 12 Volt DC Motor-Driven Diaphragm Pumps

PowerFLO 7800 Series 12 Volt DC Motor-Driven Diaphragm Pumps Installation Operation Repair Parts PowerFLO 7800 Series 12 Volt DC Motor-Driven Diaphragm Pumps Specifications Motor Type: 12 VDC, permanent magnet, totally enclosed, non-ventilated Leads: 14 AWG, 12

More information

PowerFLO 5800/5900 Series

PowerFLO 5800/5900 Series PowerFLO 5800/5900 Series 5830/5930: 3.0 GPM 5836/5936: 3.6 GPM Inches (mm) Bypass Models Demand Models Switch 1.87 (47.5) 7.58 (192.5) 7.58 (192.5) 9.08 (230.6) 5840/5940: 4.0 GPM 5850/5950: 5.0 GPM Inches

More information

Diaphragm Pumps & Accessories

Diaphragm Pumps & Accessories DIAPHRAGM PUMPS Diaphragm Pumps & Accessories Delavan Powerflo Diaphragm pumps offer a wide range of products from 1 gallon per minute to 7 gallons per minute, meeting all your agricultural and industrial

More information

ARAG Modular Manual Valve Operating Instructions and Parts Manual

ARAG Modular Manual Valve Operating Instructions and Parts Manual ARAG Modular Manual Valve Operating Instructions and Parts Manual Form L-1478 (11/12, Rev. C) Description California Proposition 65 Warning -- This product and related accessories contain chemicals known

More information

Roller Pump Comparisons

Roller Pump Comparisons Roller Pump Comparisons Get up to 10 times longer pump life with Hypro Silver Series XL Roller pumps! These three pump housings were photographed after being tested with a 30:1 mix of water and Roundup

More information

HYPRO SPRAYER PUMPS FIMCO. Code # MFG Part # Description List Price

HYPRO SPRAYER PUMPS FIMCO. Code # MFG Part # Description List Price HYPRO SPRAYER PUMPS 82 IMPORTANT NOTE: Use cast iron pumps for general spraying. Use Ni-Resist and XL (Silver series) pumps for liquid fertilizers, soil fumigants and insecticides containing phosphates.

More information

HYPRO SPRAYER PUMPS C-A Cast Iron Pump Less Coupler $ N-A Ni-Resist Pump Less Coupler $

HYPRO SPRAYER PUMPS C-A Cast Iron Pump Less Coupler $ N-A Ni-Resist Pump Less Coupler $ HYPRO SPRAYER PUMPS 81 IMPORTANT NOTE: Use cast iron pumps for general spraying. Use Ni-Resist and XL (Silver series) pumps for liquid fertilizers, soil fumigants and insecticides containing phosphates.

More information

Lubricator Gun: 10,000 psi (700 bar) Maximum Delivery Pressure when disconnected from Dispenser

Lubricator Gun: 10,000 psi (700 bar) Maximum Delivery Pressure when disconnected from Dispenser INSTRUCTIONS-PARTS LIST 30 455 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. Rev. C Supercedes B Hand-Operated Portable Grease Dispenser Buckshot Luber

More information

Color Change Valve. Instructions Parts List K

Color Change Valve. Instructions Parts List K Instructions List Color Change Valve 0K For color changing or distribution of industrial paints and coatings or fluids. 00 psi (0. MPa, bar) Maximum Air Inlet Pressure 00 psi (. MPa, bar) Maximum Fluid

More information

LUBRICATOR GUN INSTRUCTIONS-PARTS LIST. 10,000 psi (700 bar) Maximum Delivery Pressure. Detachable-type

LUBRICATOR GUN INSTRUCTIONS-PARTS LIST. 10,000 psi (700 bar) Maximum Delivery Pressure. Detachable-type INSTRUCTIONS-PARTS LIST 306 460 INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. Rev. E Supercedes D Detachable-type LUBRICATOR GUN 10,000 psi (700 bar)

More information

HYPRO SPRAYER PUMPS FIMCO. Code # MFG Part # Description List Price

HYPRO SPRAYER PUMPS FIMCO. Code # MFG Part # Description List Price IMPORTANT NOTE: Use cast iron pumps for general spraying. Use Ni-Resist and XL (Silver series) pumps for liquid fertilizers, soil fumigants and insecticides containing phosphates. Repair Kits Include Super

More information

ARAG Modular Electric Valve Operating Instructions and Parts Manual

ARAG Modular Electric Valve Operating Instructions and Parts Manual ARAG Modular Electric Valve Operating Instructions and Parts Manual Description Form L-1479 (11/12) California Proposition 65 Warning -- This product and related accessories contain chemicals known to

More information

LEWIS POULTRY HOUSE BLOWER OWNER / OPERATOR MANUAL

LEWIS POULTRY HOUSE BLOWER OWNER / OPERATOR MANUAL LEWIS POULTRY HOUSE BLOWER OWNER / OPERATOR MANUAL MODEL # PB-1 Manufactured by: Lewis Brothers Manufacturing, Inc. Post Office Box 146 Baxley, GA 31515 Telephone: (912) 367-4651 Fax: (912) 367-3958 1

More information

INSTRUCTIONS PARTS LIST This manual contains important warnings and information. READ AND RETAIN FOR REFERENCE

INSTRUCTIONS PARTS LIST This manual contains important warnings and information. READ AND RETAIN FOR REFERENCE INSTRUCTIONS PARTS LIST 308 493 This manual contains important warnings and information. READ AND RETAIN FOR REFERENCE Rev. A Second Gun Hose Kit 100 psi (6.9 bar) Maximum Working Pressure These kits include

More information

BC Brake Caliper. (i) MEX (55) QRO (442) MTY (81) DIST. AUTORIZADO

BC Brake Caliper. (i) MEX (55) QRO (442) MTY (81) DIST. AUTORIZADO MEX (55) 5 6 QRO (44) 95 7 60 MTY () 54 0 BC Brake Caliper (i) FORM NO. L-0066-B-040 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this

More information

Merkur Displacement Pump

Merkur Displacement Pump Repair/Parts Merkur Displacement Pump 32792G EN For use with high-performance finishing and coating pumps in hazardous and non-hazardous locations. For professional use only. Important Safety Instructions

More information

MODELS CX10 and CX20 INDUSTRIAL PUMPS INSTRUCTIONS AND SERVICE MANUAL

MODELS CX10 and CX20 INDUSTRIAL PUMPS INSTRUCTIONS AND SERVICE MANUAL MODELS CX0 and CX20 INDUSTRIAL PUMPS INSTRUCTIONS AND SERVICE MANUAL NOTE! To the installer: Please make sure you provide this manual to the owner of the equip ment or to the responsible party who maintains

More information

Stainless Steel Air Motor Conversion Kits

Stainless Steel Air Motor Conversion Kits Instructions Stainless Steel Air Motor Conversion Kits 096B Conversion Kit 650 For 00 Pumps Conversion Kit 65 For 590 Pumps Conversion Kit 65 For 50 Pumps Model 650 Model 65 Model 65 Graco Inc. P.O. Box

More information

Waukesha ISR FPO INSTRUCTION MANUAL INTEGRAL SPEED REDUCER SERIES

Waukesha ISR FPO INSTRUCTION MANUAL INTEGRAL SPEED REDUCER SERIES INSTRUCTION MANUAL Waukesha ISR INTEGRAL SPEED REDUCER SERIES FORM NO.: REVISION: 08/1997 READ AND UNDERSTAND THIS MANUAL PRIOR TO OPERATING OR SERVICING THIS PRODUCT. FPO 2 SAFETY Warnings, cautions and

More information

UniTorq UTQ Quarter-Turn Actuator Installation and Operation Manual

UniTorq UTQ Quarter-Turn Actuator Installation and Operation Manual UniTorq UTQ 1.5 6.4 Quarter-Turn Actuator Installation and Operation Manual Thank you for purchasing our UTQ 1.5-6.0 Electric Actuators Before installation or operation of the actuator carefully review

More information

Owner's Manual. Model: ( ) (150 Gallon, 5.5 HP Skid Sprayer) Technical Specifications. General Information. Warranty/Parts/Service

Owner's Manual. Model: ( ) (150 Gallon, 5.5 HP Skid Sprayer) Technical Specifications. General Information. Warranty/Parts/Service Owner's Manual Model: -0 (00) (0 Gallon,. HP Skid Sprayer) Technical Specifications General Information Thank you for purchasing this product. The purpose of this manual is to assist you in operating and

More information

MODEL NO GALLON H.P. SKID SPRAYER ASSEMBLY / OPERATION INSTRUCTIONS / PARTS

MODEL NO GALLON H.P. SKID SPRAYER ASSEMBLY / OPERATION INSTRUCTIONS / PARTS 5300431 MODEL NO. 9-150 150 GALLON - 5.5 H.P. SKID SPRAYER ASSEMBLY / OPERATION INSTRUCTIONS / PARTS Pressure Gauge - Adjustable Pressure Range Suction Line Filter Handgun With 25 Feet Of Handgun Hose

More information

Service Guide JATCO Environmental Protection Tank Model J-7000

Service Guide JATCO Environmental Protection Tank Model J-7000 Service Guide JATCO Environmental Protection Tank Model J-7000 Listed below are a series of steps to follow if the JATCO tank fails to dump properly. #1. Be sure there is an adequate supply of gas pressure

More information

Installation, Operation, Repair and Parts Manual

Installation, Operation, Repair and Parts Manual Self-Priming Adaptor Form L-1516 (3-08) Installation, Operation, Repair and Parts Manual Description Self-priming adaptor (SPA) is a low pressure tank that provides air separation from the liquid being

More information

S T C. STC Air Actuated Valves. Fine Quality. Precision Engineered Advanced Design. Excellent Prices. connects fluid power to industrial automation TM

S T C. STC Air Actuated Valves. Fine Quality. Precision Engineered Advanced Design. Excellent Prices. connects fluid power to industrial automation TM Precision Engineered Advanced Design Catalog No.: PUB09KS STC Air Actuated Valves Fine Quality Excellent Prices connects fluid power to industrial automation Website: StcValve.com STC PNEUMATIC ACTUATED

More information

Stainless Steel Air Motor Conversion Kits

Stainless Steel Air Motor Conversion Kits Instructions Stainless Steel Air Motor Conversion Kits 096D Conversion Kit 650 For 00 Pumps Conversion Kit 65 For 590 Pumps Conversion Kit 65 For 50 Pumps Model 650 Model 65 Model 65 Installation Pressure

More information

FEATURES: APPLICATIONS:

FEATURES: APPLICATIONS: Ultimate power and performance in a small package best describes the all new F4 Series gear pumps. The pressure balanced bushing blocks and sleeve bearings provide both extra long life and high performance.

More information

Features: Applications: 12 standard sizes Pressures to 3625 PSI (250 Bar)

Features: Applications: 12 standard sizes Pressures to 3625 PSI (250 Bar) Ultimate power and performance in a small package best describes the all new F4 Series gear pumps. The pressure balanced bushing blocks and sleeve bearings provide both extra long life and high performance.

More information

I N D U S T www.remcoindustries.com R I E S PUMP FITTINGS ProFLO 3/4" Quick Attach Fittings Size Fitting Type Material FQ5S-38 3 4" QA x 3 8" HB Straight Fitting w/ O-Ring Nylon FQ5S-12 3 4" QA x 1 2"

More information

MINING FORESTRY MOBILE TRUCK AGRICULTURE MATERIAL HANDLING OPTIMUM

MINING FORESTRY MOBILE TRUCK AGRICULTURE MATERIAL HANDLING OPTIMUM MINING FORESTRY MOBILE TRUCK AGRICULTURE MATERIAL HANDLING OPTIMUM Muncie Power Products OPTIMUM Series gear pumps/motors offer premier performance for a wide variety of applications across several industries.

More information

SR75 BIG GUN SR75 BIG GUN PARTS LIST SR75 WITH HD100 BEARING ASSEMBLY

SR75 BIG GUN SR75 BIG GUN PARTS LIST SR75 WITH HD100 BEARING ASSEMBLY SR75PL-7 SR75 BIG GUN SR75 BIG GUN PARTS LIST SR75 WITH HD100 BEARING ASSEMBLY SR75 WITH CB75 BEARING ASSEMBLY NOTE: not approved for center pivot end gun application 10347-XXX BODY ASSEMBLY, SR75 6089

More information

PRO ES Test Fixture, High Voltage Test Probe, & KV Meter

PRO ES Test Fixture, High Voltage Test Probe, & KV Meter INSTRUCTIONS PARTS LIST 308 217 This manual contains important warnings and information. READ AND RETAIN FOR REFERENCE Rev. B Supersedes A PRO ES Test Fixture, High Voltage Test Probe, & KV Meter To Test

More information

TRUCK PRODUCT LINE A DIVISION OF DAKOTA FLUID POWER, INC.

TRUCK PRODUCT LINE A DIVISION OF DAKOTA FLUID POWER, INC. TRUCK PRODUCT LINE 2210 Main Ave W, West Fargo, ND 58078 877.410.7072 www.epgdivision.com A DIVISION OF DAKOTA FLUID POWER, INC. ABOUT US About: Engineered Products Group (EPG), a division of Dakota Fluid

More information

Parts 3A2528C EN. Mark VII Max, Mark X Premium, and Mark X Max Electric Airless Sprayers

Parts 3A2528C EN. Mark VII Max, Mark X Premium, and Mark X Max Electric Airless Sprayers Parts Mark VII Max, Mark X Premium, and Mark X Max Electric Airless Sprayers 3A2528C EN For Portable Airless Spraying of Architectural Coatings and Paints. For professional use only. Not approved for use

More information

ROLLER PUMPS. Hypro Roller Pumps. Max RPM. Max PSI Series - 6 Roller Pump Series - 5 Roller Pump Series - 4 Roller Pump

ROLLER PUMPS. Hypro Roller Pumps. Max RPM. Max PSI Series - 6 Roller Pump Series - 5 Roller Pump Series - 4 Roller Pump ROLLER Hypro Roller Pumps GPM PSI RPM 1502C 62 150 1000 1502N 62 150 1000 1502XL 62 150 1000 1700C 45 200 1000 1700N 45 200 1000 1700XL 45 200 1000 4001C-A 9 150 1800 1500 Series - 6 Roller Pump Cast-iron

More information

Old Proportioning Pumps

Old Proportioning Pumps Repair - Parts Old Proportioning Pumps 311391F For proportioning pumps on Gusmer and Old Graco H-25 and H-XP2 Hydraulic Proportioners. Important Safety Instructions Read all warnings and instructions in

More information

MODEL 200 MULTI-JET FLOW METER

MODEL 200 MULTI-JET FLOW METER MODEL 200 MULTI-JET FLOW METER - For Water Applications - INSTALLATION & INSTRUCTION MANUAL 8635 Washington Avenue Racine, Wisconsin 53406 Technical Toll-Free: 877.722.4631 Sales Toll-Free: 800.235.1638

More information

SR75 BIG GUN SR75 BIG GUN PARTS LIST. SR75 WITH hd100 SR75 WITH CB75. NOTE: not approved for center pivot end gun application

SR75 BIG GUN SR75 BIG GUN PARTS LIST. SR75 WITH hd100 SR75 WITH CB75. NOTE: not approved for center pivot end gun application SR75PL-5 SR75 BIG GUN SR75 BIG GUN PARTS LIST SR75 WITH hd100 Bearing Assembly SR75 WITH CB75 Bearing Assembly NOTE: not approved for center pivot end gun application 10347-xxx Body Assembly, SR75 6089

More information

WORKHORSE. Assembly / Operation Instructions / Parts

WORKHORSE. Assembly / Operation Instructions / Parts WORKHORSE S P R A Y E R S Assembly / Operation Instructions / Parts by, a Division of Green Leaf, Inc ATV 2522 MODEL # ATV 2522 DELUXE ATV 2 NOZZLE SPRAYER GENERAL INFORMATION WARRANTY / PARTS / SERVICE

More information

PFS Rotameter. Variable Area Flowmeter. Instruction Manual PFS-RM200, RM230, RM250

PFS Rotameter. Variable Area Flowmeter. Instruction Manual PFS-RM200, RM230, RM250 PFS Rotameter 09/2018 Rev. 0 Variable Area Flowmeter Instruction Manual PFS-RM200, RM230, RM250 Please note: This instruction manual provides detailed information and instructions that must be read, understood

More information

FS Series INSTRUCTION AND MAINTENANCE MANUAL: FS SERIES SHEAR BLENDER. Sanitary Mixing and Blending Equipment

FS Series INSTRUCTION AND MAINTENANCE MANUAL: FS SERIES SHEAR BLENDER. Sanitary Mixing and Blending Equipment FS Series INSTRUCTION AND MAINTENANCE MANUAL: FS SERIES SHEAR BLENDER Sanitary Mixing and Blending Equipment 2 Fristam Pumps DESCRIPTION This manual contains installation, operation, assembly, disassembly

More information

MEX (55) QRO (442) Web Controls

MEX (55) QRO (442) Web Controls Web Controls SINGLE AND DUAL ROTOR TENSION CONTROL BRAKES MODELS:,,,, AND INSTALLATION, OPERATION, AND MAINTENANCE INSTRUCTIONS Read this manual carefully, making full use of its explanations and instructions.

More information

ProFlo FatBoy

ProFlo FatBoy The Standard For Professional Grade Diaphragm Pumps. ProFlo 3300 5500 FatBoy Operational and Installation Guidelines, Repair & Parts Contents 3300 5500 Fatboy Operational and Installation Guidelines...2

More information

SMPT OSA1 / 4. VISAGAGE ORIFICE SELECTOR Patent #9,433,144

SMPT OSA1 / 4. VISAGAGE ORIFICE SELECTOR Patent #9,433,144 SMPT OSA1 / 4 VISAGAGE ORIFICE SELECTOR Patent #9,433,144 Installation and Operation Manual WARNING: USE OF THIS PRODUCT FOR ANY PURPOSES OTHER THAN ITS ORIGINAL INTENT, ABUSE OF THE PRODUCT, AND/OR MODIFICATION

More information

5874SS/5874PB/5874PBF/VRK5874/PBA6/ PBA6HPB/PBA7 Valve/Push Button

5874SS/5874PB/5874PBF/VRK5874/PBA6/ PBA6HPB/PBA7 Valve/Push Button INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS 1455 Kleppe Lane Sparks, NV 89431-6467 (775) 359-4712 Fax (775) 359-7424 E-mail: haws@hawsco.com website: www.hawsco.com No. 2077650(1) 5874SS/5874PB/5874PBF/VRK5874/PBA6/

More information

MODEL 5120 Tire Repair Station

MODEL 5120 Tire Repair Station MODEL 5120 Tire Repair Station 00-0049 Installation, Operation & Repair Parts Information Branick Industries, Inc. 4245 Main Avenue P.O. Box 1937 Fargo, North Dakota 58103 REV01182017 P/N: 81-0058G CAUTION

More information

NEUTRALIZATION SYSTEM FOR OPA & GLUTARALDEHYDE MEDI-NEWT. User Manual. Endoscope reprocessing the the way way it it should be be

NEUTRALIZATION SYSTEM FOR OPA & GLUTARALDEHYDE MEDI-NEWT. User Manual. Endoscope reprocessing the the way way it it should be be NEUTRALIZATION SYSTEM FOR OPA & GLUTARALDEHYDE MEDI-NEWT User Manual Endoscope reprocessing the the way way it it should be be 1 Medi-Newt Neutralization System Instruction Manual 50096-951 Rev C 2011,

More information

LG-60-3PT-WP-309-BL-TSC

LG-60-3PT-WP-309-BL-TSC 55 Model No: LG-0-PT-WP-0-BL-TSC 0 Gallon Point Lawn & Garden Sprayer W/Pump & Coupler & Boomless Boom Assembly / Operation Instructions / Parts ASSEMBLY Most of the sprayer has been assembled at the factory..

More information

Models: D-03, G-03, G-13, M-03 and M-23 Mono-Block Kel-Cell Versions

Models: D-03, G-03, G-13, M-03 and M-23 Mono-Block Kel-Cell Versions Parts Manual D03-991-2406 Models: D-03, G-03, G-13, M-03 and M-23 Mono-Block Kel-Cell Versions IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial No. Date

More information

Parts Manual Vermeer/ McLaughlin Mud System 230P

Parts Manual Vermeer/ McLaughlin Mud System 230P 2006 Perimeter Road. Greenville, SC 29605 Toll Free: 800/435-9340 - Phone: 864/277-5870 Fax: 864/235-9661 - Website address: www.mightymole.com Email address: mmole@mightymole.com Parts Manual Vermeer/

More information

Model 8317 Combination Shower Eye/Face Wash

Model 8317 Combination Shower Eye/Face Wash INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS 1455 Kleppe Lane Sparks, NV 89431-6467 (775) 359-4712 Fax (775) 359-7424 E-mail: haws@hawsco.com website: www.hawsco.com Model 8317 Combination Shower

More information

TRACKS BUILT TO LAST. AGRICULTURAL MADE FOR AGRICULTURE. PROVEN TO PERFORM. FOR HIGH-HORSEPOWER TRACTORS

TRACKS BUILT TO LAST. AGRICULTURAL MADE FOR AGRICULTURE. PROVEN TO PERFORM. FOR HIGH-HORSEPOWER TRACTORS AGRICULTURAL TRACKS MADE FOR AGRICULTURE. PROVEN TO PERFORM. BUILT TO LAST. When it comes to tracks for agriculture, we understand the need for strength and durability. Our commitment to quality is steadfast.

More information

Assembly / Operation Instructions / Parts

Assembly / Operation Instructions / Parts Assembly / Operation Instructions / Parts TSC# 0 VENDOR # LGDTSCL* GAL. DELUXE TRAILER SPRAYER Compact Trailer and Tank Polyethylene Tank.0/.0 x Pneumatic Tires Volt Diaphragm Pump.0 G.P.M. Lever Handgun

More information

WEATHER TEC AGRICULTURAL PRODUCTS

WEATHER TEC AGRICULTURAL PRODUCTS Catalog Stainless Steel Fulcrum Pin Stainless Steel Spring Tapered Brass Nozzle T-Ring Bearing Exclusive Stainless Steel Spindle Lever Hood Double Bridge Construction Wide Impact Area Skirted Head Stainless

More information

24G621 Agitator Speed Controller Accessory

24G621 Agitator Speed Controller Accessory Instructions-Parts 24G62 Agitator Speed Controller Accessory 3A35A ENG Accessory kit to control and automatically maintain the speed of an air-powered agitator. For professional use only. Important Safety

More information

Pro Shot Grease Dispense Valve

Pro Shot Grease Dispense Valve Instructions Parts List Pro Shot Grease Dispense Valve 309032J For high pressure grease dispense. 8000 psi (55 MPa, 552 bar) Maximum Working Pressure Model No. 242055, Series B, 1/4 npt Fluid Inlet Model

More information

Vertical Hydraulic Driver

Vertical Hydraulic Driver Repair-Parts Vertical Hydraulic Driver 3A001C EN For use with a vertically mounted proportioning pump. For professional use only. D30 - Vertical Hydraulic Driver 100 psi (8. MPa, 8.7 bar) Maximum Working

More information

PARTS AND INSTALLATION MANUAL

PARTS AND INSTALLATION MANUAL PSP-3240 POLYPROPYLENE SELF-PRIMING 2 CENTRIFUGAL PUMP PARTS AND INSTALLATION MANUAL PSP-3240 Shown with GX-160 Honda CDS-JOHN BLUE COMPANY DIVISION OF ADVANCED SYSTEMS TECHNOLOGY, INC. 165 Electronics

More information

Operation and Safety Manual

Operation and Safety Manual Barrel Handler Operation and Safety Manual EZ SPOT UR Inc. 803 25 th St. N Fargo, ND 58102 Toll Free: 877 433 5733 Phone: 701 282 2772 Fax: 701 277 4625 Table of Contents Safety Symbols & Equipment Signs...

More information

Cleanload Chemical Eductor

Cleanload Chemical Eductor Cleanload Chemical Eductor Operation and Parts Manual Form L-1477 (3/12, Rev. B) Description 3375P-05T4 hopper ball valve, inlet ball valve (shown) 3375P-05T4-01 hopper ball valve, no inlet ball valve

More information

Operators Manual. Model 3370 Air Cooled Recirculator rev.8/98

Operators Manual. Model 3370 Air Cooled Recirculator rev.8/98 Operators Manual Model 3370 Air Cooled Recirculator 110-080 rev.8/98 Table of contents Section 1. General Information 1.1 Warranty 1.2 Unpacking Section 2. Product Information 2.1 Description 2.2 Specification

More information

3MTM CubitronTM II Bonded Abrasive Grinding and Cut-Off Wheels. BORN TO GRIND. IT S GRINDING REINVENTED.

3MTM CubitronTM II Bonded Abrasive Grinding and Cut-Off Wheels. BORN TO GRIND. IT S GRINDING REINVENTED. 3MTM CubitronTM II Bonded Abrasive Grinding and Cut-Off Wheels. BORN TO GRIND. IT S GRINDING REINVENTED. 13020160.indd 1 2/8/13 9:46 PM GRINDING REINVENTED 3MTM CubitronTM II bonded abrasive grinding and

More information

Shaft Adapter (5/8 to 3/4 ) NOTE CI = Cast Iron, N = Ni-Resist, SL = Silver Last. Series Series 7560

Shaft Adapter (5/8 to 3/4 ) NOTE CI = Cast Iron, N = Ni-Resist, SL = Silver Last. Series Series 7560 Your One Stop Shop for Parts Hypro Roller Pumps Ideal for Farm Sprayers, Pest Control and Chemical Application Usage. Housings available in Cast Iron, Ni-Resist or Silver Series Self priming operation;

More information

Model P-40 & Model P-25 POWER PUSHER

Model P-40 & Model P-25 POWER PUSHER Power Pusher Description INSTRUCTION MANUAL The Power Pusher provides ram capability by using the spreading power of the POWER HAWK P-16 Rescue Tool. (The Power Pusher may also be used with other spreader

More information

OPERATIONS MANUAL MODEL MT-500

OPERATIONS MANUAL MODEL MT-500 OPERATIONS MANUAL MODEL MT-500 Machine Serial Number: Specification Number: Engine Serial Number: SOLD & SERVICED BY SAFETY PRECAUTIONS AS STATED IN OSHA, THE EMPLOYER SHALL PERMIT ONLY THOSE EMPLOYEES

More information

ROLLER PUMPS. Installation, Operation, Repair and Parts Manual. Description SERIES 7560 SERIES Form L-0100R 05/11, Rev. C

ROLLER PUMPS. Installation, Operation, Repair and Parts Manual. Description SERIES 7560 SERIES Form L-0100R 05/11, Rev. C ROLLER PUMPS Installation, Operation, Repair and Parts Manual Form L-0100R 05/11, Rev. C Description Hypro roller pumps are designed for agricultural and industrial spraying and transfer of a variety fluids.

More information

200 & 300 Gallon 3 Point w/5880 Nozzle ASSEMBLY / OPERATION INSTRUCTIONS / PARTS

200 & 300 Gallon 3 Point w/5880 Nozzle ASSEMBLY / OPERATION INSTRUCTIONS / PARTS 5300826 Model: 200-3PT-5880 5300827 Model: 300-3PT-5880 200 & 300 Gallon 3 Point w/5880 Nozzle ASSEMBLY / OPERATION INSTRUCTIONS / PARTS PUMP SYSTEM ASSEMBLY INSTRUCTIONS 1. Use a good grade of thread

More information

Intended Use: Explanation of Signal Word Consequences

Intended Use: Explanation of Signal Word Consequences SAFETY INFORMATION & INSTRUCTION MANUAL Please read, understand, and follow all safety information contained in these instructions prior to the use of this device. Retain these instructions for future

More information

CDS-JOHN BLUE COMPANY

CDS-JOHN BLUE COMPANY HYDRAULIC DRIVE KIT FOR VARIABLE RATE OR MANUAL CONTROL SYSTEMS PARTS AND INSTALLATION MANUAL CDS-JOHN BLUE COMPANY DIVISION OF ADVANCED SYSTEMS TECHNOLOGY, INC. 290 Pinehurst Drive - Huntsville, Alabama

More information

DAKOTA INSTRUMENTS OPERATING MANUAL ACR ACRYLIC FLOW METERS

DAKOTA INSTRUMENTS OPERATING MANUAL ACR ACRYLIC FLOW METERS OPERATING MANUAL ACR ACRYLIC FLOW METERS DAKOTA INSTRUMENTS Website: http://dakotainstruments.com E-mail: info@dakotainstruments.com Toll Free USA and Canada: 1(800) 879-7713 Tel. 1+(845) 770-3200 Fax.

More information

Air Control Kits INSTRUCTIONS-PARTS LIST. Table of Contents HIGH VOLUME. 250 psi (1.7 MPa, 17.2 bar) Maximum Air Inlet Pressure

Air Control Kits INSTRUCTIONS-PARTS LIST. Table of Contents HIGH VOLUME. 250 psi (1.7 MPa, 17.2 bar) Maximum Air Inlet Pressure INSTRUCTIONS-PARTS LIST INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. 308 722 Rev. A HIGH VOLUME Air Control Kits 250 psi (.7 MPa, 7.2 bar) Maximum

More information

CDS-JOHN BLUE COMPANY

CDS-JOHN BLUE COMPANY VRH-1000 HYDRAULIC VARIABLE RATE DRIVE AND MOUNT KIT PARTS AND INSTRUCTION MANUAL CDS-JOHN BLUE COMPANY DIVISION OF ADVANCED SYSTEMS TECHNOLOGY, INC. 290 Pinehurst Drive - Huntsville, Alabama 35806 P.O.

More information

Straight-Bore Clutch LSCC-32, 44, 54

Straight-Bore Clutch LSCC-32, 44, 54 Straight-Bore Clutch LSCC-32, 44, 54 1 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are subject to change without notice. Technical

More information

3M TM Cubitron TM II Bonded Abrasive Grinding and Cut-Off Wheels. born to. grind. It s grinding reinvented. Featuring. cut & grind wheels

3M TM Cubitron TM II Bonded Abrasive Grinding and Cut-Off Wheels. born to. grind. It s grinding reinvented. Featuring. cut & grind wheels 3M TM Cubitron TM II Bonded Abrasive Grinding and Cut-Off Wheels. born to grind. It s grinding reinvented. Featuring NEW cubitron ii cut & grind wheels Grinding Reinvented 3M TM Cubitron TM II bonded abrasive

More information

Low Pressure Diaphragm Pumps

Low Pressure Diaphragm Pumps Low Pressure Diaphragm Pumps Installation, Operation, Repair and Parts Manual Form 1381 5-03 Description Hypro low pressure diaphragm pumps are recommended for ground and low-level spraying of herbicides,

More information

ASM Maxi Poles. Instruction-Parts B Series. For the application of architectural paints and coatings.

ASM Maxi Poles. Instruction-Parts B Series. For the application of architectural paints and coatings. Instruction-Parts ASM Maxi Poles 312483B For the application of architectural paints and coatings. 3400 Series 4050 psi (27.92 MPa, 280 bar) Maximum Working Pressure Important Safety Instructions Read

More information

MODEL 900 IMPELLER-TYPE FLOW METER

MODEL 900 IMPELLER-TYPE FLOW METER MODEL 900 IMPELLER-TYPE FLOW METER - For Water Applications - INSTALLATION & INSTRUCTION MANUAL 8635 Washington Avenue Racine, Wisconsin 53406 Toll Free: 800.235.1638 Phone: 262.639.6770 Fax: 262.417.1155

More information

Low Pressure Diaphragm Pumps

Low Pressure Diaphragm Pumps Low Pressure Diaphragm Pumps Installation, Operation, Repair and Parts Manual Description Form L-1381 09/10 Hypro low pressure diaphragm pumps are recommended for ground and low-level spraying of herbicides,

More information

Cleaning System. Instructions/Parts A

Cleaning System. Instructions/Parts A Instructions/Parts Cleaning System 310623A 234533 For use with Multi-Orifice Linear Streaming Applicator (MOLSA) to apply automotive Liquid Applied Sound Deadener (LASD) materials. 100 psi (0.68 MPa, 6.8

More information

Parts Manual V100G Vacuum Machine Part #E (SERIAL #1G G )

Parts Manual V100G Vacuum Machine Part #E (SERIAL #1G G ) 2006 Perimeter Road. Greenville, SC 29605 Toll Free: 800/435-9340 - Phone: 864/277-5870 Fax: 864/235-9661 - Website address: www.mightymole.com Email address: mmole@mightymole.com Parts Manual V100G Vacuum

More information

Model 8346/8346CRP Shower & Eye/Face Wash

Model 8346/8346CRP Shower & Eye/Face Wash INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS 1455 Kleppe Lane Sparks, NV 89431-6467 (775) 359-4712 Fax (775) 359-7424 E-mail: haws@hawsco.com website: www.hawsco.com No. 2080177(15) Model 8346/8346CRP

More information

Single Post Caliper Brake VC500

Single Post Caliper Brake VC500 Single Post Caliper Brake VC500 1 In accordance with Nexen s established policy of constant product improvement, the specifications contained in this manual are subject to change without notice. Technical

More information

MODEL 200 MULTI-JET FLOW METER

MODEL 200 MULTI-JET FLOW METER MODEL 200 MULTI-JET FLOW METER - For Water Applications - INSTALLATION & INSTRUCTION MANUAL 8635 Washington Avenue Racine, Wisconsin 53406 Toll Free: 800.235.1638 Phone: 262.639.6770 Fax: 262.417.1155

More information

MODEL NO. ATVBK NOZZLE BOOM ASSEMBLY FOR ATV MOUNTING ASSEMBLY / OPERATION INSTRUCTIONS / PARTS

MODEL NO. ATVBK NOZZLE BOOM ASSEMBLY FOR ATV MOUNTING ASSEMBLY / OPERATION INSTRUCTIONS / PARTS 5301230 MODEL NO. ATVBK-200 2 NOZZLE BOOM ASSEMBLY FOR ATV MOUNTING ASSEMBLY / OPERATION INSTRUCTIONS / PARTS 2. Center the boom tube on the boom mounts and secure in place with (2) u-bolts and whiz locknuts.

More information

3-Point Sprayer Brochure 2018

3-Point Sprayer Brochure 2018 3-Point Sprayer Brochure 2018 Agricultural & Industrial Sprayers, Trailers & Supplies Agricultural & Professional Sprayers For over 45 years, PBM Supply & Mfg., Inc. has been an innovative leader in the

More information

4:1 Fusion Static Mixer Kit

4:1 Fusion Static Mixer Kit Instructions-Parts 4:1 Fusion Static Mixer Kit 1294A For use with 4:1 ratio material and Graco Fusion MP gun only. Not for use in explosive atmospheres. 500 psi (24.5 MPa, 245 bar) Maximum Fluid Working

More information

PCC O P E R A T I O N S. Pump Cycle Counter M A N U A L. Environmental Systems

PCC O P E R A T I O N S. Pump Cycle Counter M A N U A L. Environmental Systems O P E R A T I O N S Environmental Systems PCC Pump Cycle Counter M A N U A L PO Box 3726 Ann Arbor, Michigan 48106-3726 (800) 624-2026 North America Only (734) 995-2547 Tele. (734) 995-1170 Fax info@qedenv.com

More information

MODEL 5500 Tire Repair Station

MODEL 5500 Tire Repair Station MODEL 5500 Tire Repair Station Installation, Operation and Repair Parts Information Branick Industries, Inc. 4245 Main Ave P.O. Box 1937 Fargo, North Dakota 58103 P/N: 81-0047C TABLE OF CONTENTS SAFETY

More information

Watts Series CSM-61. Flow Measurement/Balancing Valves Sizes: 1 1 4", 1 1 2", 2", 2 1 2", and 3" (32, 40, 50, 65 and 80mm) Installation Instructions

Watts Series CSM-61. Flow Measurement/Balancing Valves Sizes: 1 1 4, 1 1 2, 2, 2 1 2, and 3 (32, 40, 50, 65 and 80mm) Installation Instructions Watts Series CSM-61 Measurement/Balancing Valves Sizes: 1 1 4", 1 1 2", 2", 2 1 2", and 3" (32, 4, 5, 65 and 8mm) Installation Instructions IS-CSM-61-L Watts Measurement/Balancing Valves are available

More information

I-110 PARTS MANUAL Updated 3/21/01

I-110 PARTS MANUAL Updated 3/21/01 I-110 PARTS MANUAL Updated 3/21/01 Ashland Industries Inc. Hwy. 13 South P.O. Box 717 Ashland, WI. 54806 877-634-4622 Toll Free - phone 715-682-4622 phone 715-682-9717 fax www.ashlandind.com MODEL I-100,

More information

Operation and Parts Manual

Operation and Parts Manual Operation and Parts Manual 3-Point PTO and Hydraulic Stump Grinders Models: SC-25 and SC-25H SC-50 and SC-50H Safety Operation Maintenance Repair Troubleshooting Parts Parts SC-50 and SC-50-H Stumpbuster

More information

Universal Hand Pump. Instructions D EN. - For transferring grease to Grease Jockey and G3 Systems - Part No Hand Operated - 35# Pump

Universal Hand Pump. Instructions D EN. - For transferring grease to Grease Jockey and G3 Systems - Part No Hand Operated - 35# Pump Instructions Universal Hand Pump 31758D EN - For transferring grease to Grease Jockey and G3 Systems - Part No. 47886 Hand Operated - 35# Pump 600 psi (4.13 MPa, 41.3 bar) Maximum Working Pressure 85 ml

More information

Air Control Kit INSTRUCTIONS-PARTS LIST. Table of Contents HIGH VOLUME. 250 psi (1.7 MPa, 17.2 bar) Maximum Air Inlet Pressure

Air Control Kit INSTRUCTIONS-PARTS LIST. Table of Contents HIGH VOLUME. 250 psi (1.7 MPa, 17.2 bar) Maximum Air Inlet Pressure INSTRUCTIONS-PARTS LIST INSTRUCTIONS This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. 308 648 Rev. B Supersedes A HIGH VOLUME Air Control Kit 250 psi (.7 MPa, 7.2 bar)

More information

Parts Manual Vermeer/ McLaughlin Mud System 230P

Parts Manual Vermeer/ McLaughlin Mud System 230P 2006 Perimeter Road. Greenville, SC 29605 Toll Free: 800/435-9340 - Phone: 864/277-5870 Fax: 864/235-9661 - Website address: www.mightymole.com Email address: mmole@mightymole.com Parts Manual Vermeer/

More information

Dual/Triple Manifold Water Filtration Systems Instruction Manual

Dual/Triple Manifold Water Filtration Systems Instruction Manual 3M TM Water Filtration Products Dual/Triple Manifold Water Filtration Systems Instruction Manual High Flow Series Water Filtration Systems Installer: Please leave this manual with owner/operator. 3M Water

More information

3M Locator Plate

3M Locator Plate 3M Locator Plate 3443-113 Instructions for the Assembly of 3M Tripolarized Wiremount Sockets 1.0 General The 3M Locator Plate 3443-113 was designed to aid in the assembly of the 3M Mini Socket Connector.50

More information

Pump/Manifold Kits. Instructions F ENG. To convert E-Flo 4-Ball Piston Pumps to a different size lower. For professional use only.

Pump/Manifold Kits. Instructions F ENG. To convert E-Flo 4-Ball Piston Pumps to a different size lower. For professional use only. Instructions Pump/Manifold Kits 311611F ENG To convert E-Flo 4-Ball Piston Pumps to a different size lower. For professional use only. See page 2 for a list of available kits. Important Safety Instructions

More information