Four Shaft Linear Thrusters

Size: px
Start display at page:

Download "Four Shaft Linear Thrusters"

Transcription

1 Four Shaft Linear Thrusters FOUR SHAFT THRUSTERS Three Models with bores from 2 to 4 Twice the load capacity of comparable two shaft units Reduced deflection and bearing play Compact, light weight robust design CYLINDER Several manufacturers to choose from Pneumatic or Hydraulic Replaceable or repairable ADJUSTABLE SHAFT COLLARS Black oxide finish steel collars assist with setup GUIDE SHAFTS Precision ground Available in case hardened Steel, Type 440 case hardened Stainless Steel or Type 303 Stainless Steel SHAFT BEARINGS Low friction recirculating ball bearing and shaft seals. Optional TFE composite bearings for harsh environments. PRECISION HOUSING Black anodized aluminum. Four through holes for mounting LUBRICATION POINTS Oil covers or grease fittings provide means of lubricating bearings for extended life AUXILIARY MOUNTING PLATE Black anodized aluminum Three (3) mounting locations - Top, bottom, or back of housing TOOLING PLATE Black oxide finish Carbon Steel or Type 304 Stainless Steel Tapped or counterbored interface holes Short or Long

2 General Information Table of Contents Four Shaft Linear Thrusters How to Order Engineering Data Dimensions Options Technical Specifications

3 General Information Company History Established in 1968 to design and build innovative production machinery, Ultramation has worked successfully through the years in fields as diverse as textiles, woodworking, apparel manufacturing and food packaging. In recent years, Ultramation has focussed on the development and growth of the Linear Thruster product line. With over thirty years experience in the fields of electronics and electromechanical automation, we understand the problems faced by today s design engineers and, more important, we help provide creative solutions for the implementation of their design goals. Cognizant that the specials of today quite often become the standard products of tomorrow, Ultramation welcomes the opportunity to work closely with its customers in every possible way. Lubrication Linear Thrusters are precise but simple linear actuators which utilize high pressure air (up to 250 psi) or low pressure hydraulic fluid (up to 500 psi) for their motive power. The larger models (4 through 54) are offered with hydraulic cylinders which operate at up to 3000 psi. All air cylinders are prelubricated at the factory but should be used with filtered, lubricated air for best results. Otherwise, introduce a few drops of 10 weight oil into each cylinder port every 100 hours of operation. Hydraulic cylinders should be used only with clean hydraulic fluid compatible with the specified seals. Proper lubrication is an important prerequisite for long service life of linear ball bearings. Therefore, spring-loaded oiler ports are provided on the faces or sides of each Linear Thruster housing. Oil lubrication is preferred in order to guarantee adequate lubrication of all rolling contact areas. Introduce several drops of 10 weight oil into each port every 100 hours of normal operation, more often if rapid cycling is necessary. Standard oilers can be replaced with grease fittings and a light weight grease used as a lubricant. Grease is recommended only in those cases where rapid movements and high cyclic rates will not occur. Cylinder Cushions Cylinder cushions are recommended in those cases where heavy loads are attached to the tooling plate or where longer stroke cylinders must be operated at high piston speeds. These devices utilize small, auxiliary pistons designed into either or both ends of the main piston to entrap exhaust air at either or both ends of the cylinder stroke. By controlling the trapped air exhaust rate, either through a fixed orfice or an adjustable needle-valve, the main piston undergoes a controlled deceleration as it approaches the end of the cylinder. The following table lists the availability of cushions on the various types of cylinders most commonly used in Ultramation Linear Thrusters. CYLINDER MFR & SERIES Bimba Original Line Parker Series P Allenair Type E CUSHION TYPES Adjustable: Single or Double Adjustable Single or Double Adjustable Single or Double AVAILABLE ON MODEL NUMBERS 44A, 44B, 64A, 64B, 54A, 54B 44A, 44B, 64A, 64B, 54A, 54B 44A, 44B, 64A, 64B, 54A, 54B Flow Controls Except in very rare instances it is always recommended that flow controls be used on air or hydraulic cylinders to control velocities. This is particularly true in the cases where heavy tooling plate loads and long stroke lengths are planned. Unrestricted movement of the piston can result in high acceleration rates and consequent high inertias which can be very damaging to the cylinder and slide mechanisms when suddenly stopped at the end of the stroke. Even in cases with low loads and short strokes, consistently high decelerations can cause damage to the cylinder rod threads. As a general rule, it is always better to drive air and hydraulic cylinders at the minimum speed consistent with effective operation. Ultramation offers standard Bimba Models FCP1, FCP2, FCP4, FCP6 and FCP8 port mounted flow controls as optional accessories on all Linear Thrusters. These controls accommodate port sizes from #10-32 through 1/2 NPT and are equipped with recessed, slotted adjustment screws and rotatable plumbing inputs. They are mounted directly into the cylinder ports for maximum control over air flow. 2

4 Four Shaft Thrusters Ordering Guide How to Order 44A C 2 E R TH T2 F1 M1 JE2 YE HE FC S Model & Bore 44A 4 x.750 Shafts, 2.00 Bore 44B 4 x.750 Shafts, 2.50 Bore 64A 4 x Shafts, 2.50 Bore 64B 4 x Shafts, 3.00 Bore 54A 4 x Shafts, 3.00 Bore 54B 4 x Shafts, 4.00 Bore Special Modification Miscellaneous Options X No Shaft Collars FC Flow Controls Hydraulic Shock Options HE Hydraulic Shock Absorber on Extend HR Hydraulic Shock Absorber on Retract HB Hydraulic Shock Absorber - Both Ends External Bumper Options Y Shafting Length for Future Bumpers YE External Urethane Bumpers on Extend YR External Urethane Bumpers on Retract YB External Urethane Bumpers - Both Ends Cylinder - Bimba Original Line (Standard) A Bimba Original Line, Dry Service B Bimba Original Line, Magnetic Piston C Bimba Original Line, Dry Service, Magnetic Piston D Bimba Double-Wall E Bimba Hydraulic F Allenair - Pneumatic/Hydraulic G P/H Series P H P/H Series P with Magnetic Piston J P/H Series SR K P/H Series SRM M P/H Series 2A - Pneumatic Heavy Duty N P/H Series 2H - Hydraulic Heavy Duty V No cylinder Cylinder Stroke (inches) Cylinder Options - No internal bumpers/cushions (Standard) B Double Internal Bumpers C Double Cushions D Nose Cushion Only E Tail Cushion Only Bearing Options - Ball Bearing (Standard) R Composite TFE Lined Auxiliary Mounting Plate Options - Bottom of Housing (Standard) TH Top of Housing BH Back of Housing W No Auxiliary Mounting Plate Tooling Plate Options - Short, Counterbored (Standard) T2 Short, Tapped T3 Long, Counterbored T4 Long, Tapped T5 Heavy Duty, Short, Counterbored T6 Heavy Duty, Short, Tapped T7 Heavy Duty, Long, Counterbored T8 Heavy Duty, Long, Tapped Z No Tooling Plate External Proximity Switch Options JE Proximity Switch on Extend JR Proximity Switch on Retract JB Proximity Switch - Both Ends - No Proximity Switch - Brackets Only 1 2 Wire, NO, VDC, 6 ft leads 2 3 Wire, PNP, NO, VDC, 6 ft leads 3 3 Wire, NPN, NO, VDC, 6 ft leads 4 2 Wire, NO, VAC, 6 ft leads Solid State Switch Options NH Solid State Switch - Nose End PH Solid State Switch - Tail End MH Solid State Switch - Both Ends 1 Bimba HSK Sinking Switch (NPN) 2 Bimba HSKX Sinking Switch (NPN) (12 Leads) 3 Bimba HSC Sourcing Switch (PNP) 4 Bimba HSCX Sourcing Switch (PNP) (12 Leads) 5 P/H ( ) Sinking Switch (NPN) 6 P/H ( ) Sourcing Switch (PNP) Magnetic Reed Switch Options N Magnetic Reed Switch - Nose End P Magnetic Reed Switch - Tail End M Magnetic Reed Switch - Both Ends 1 Bimba MRS-.087-B 2 Bimba MRS-.087-XB (12 Leads) 3 Bimba MRS-.087-BL 4 Bimba MRS-.087-XBL (12 Leads) 5 Bimba MRS-1.5-B 6 Bimba MRS-1.5-XB (12 Leads) 7 Bimba MRS-.087-PBL 8 Bimba MRS-.087-PXBL (12 Leads) 9 P/H Stainless Steel Options F1 440 Shafts, 300 Series Cyl Rod, Collars & Tooling Plate F2 300 Series Shafts, Cyl Rod, Collars & Tooling Plate G F1 + Stainless Steel Bearings and Seals *F2 option only available with composite bearings. NOTES: 1) Options not selected are left blank in the model number. 2) Heavy Duty Tooling Plates only available on Models 44 & 54. Caution: Certain configurations of the External Bumper and Hydraulic Shock Options may affect the effective stroke length of the Linear Thruster. Refer to the options section for stroke reduction details. 3

5 Four Shaft Thrusters Engineering Data 4

6 Four Shaft Linear Thrusters Dimensions MODEL 44BB-5THT3M3 M I 2Q J A B H GG AA D F.5 E N P E G MODEL 44AG-8BHT5JB2 AUXILIARY MOUNTING PLATE SHOWN DOTTED IN 3 POSSIBLE POSITIONS DRILL THRU & C BORE FOR JJ SHCS - 4 PLCS Q T C R S.5 B K CC FF BB 8 PLCS U DD BB 4 PLCS OPP SIDE L + STROKE N V SS Z II W X LL NN PP.5 PP EE HH VV GG A AC QQ B MM RR Y SHORT TOOLING PLATE NN LL MODEL 44BG-8T7YBX TT AB NN VIEW A-A HEAVY DUTY A KK B KK ZZ STANDARD VIEW B-B VV AB TT XX UU LONG TOOLING PLATE OPTION Y 5

7 Four Shaft Linear Thrusters Dimensions All dimensions are in inches. MODEL 44A 44B 64A 64B 54AG 54BG MODEL BORE BORE A A B B C C D D E E F F G G H H I I J J K K L *7.00 * 7.00 * 9.50 * 9.50 * * L M M N N P P Q Q R R S S T T U U V V W W X X Y Y Z Z AA AA BB 3/8-16 3/8-16 3/8-16 3/8-16 1/2-13 1/2-13 BB CC CC DD 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 1/4-28 DD EE 1/4 NPT 1/4 NPT 1/4 NPT 3/8 NPT 3/8 NPT 1/2 NPT EE FF # 1.25 # 1.25 FF GG GG HH 1 1/ / / / / /4-12 HH II II JJ 3/8 3/8 3/8 3/8 1/2 1/2 JJ 1/2-20 5/8-18 5/ KK LL LL MM MM NN NN PP N/A N/A PP QQ QQ RR RR SS SS TT TT UU UU VV VV WW 3/8-16 3/8-16 3/8-16 3/8-16 1/2-13 1/2-13 WW XX XX YY YY ZZ 3/8-16 3/8-16 1/2-13 1/2-13 3/4-16 3/4-16 ZZ SHCS SHCS SHCS SHCS HEX BOLT HEX BOLT AB AB AC AC NOTES: * Add.50 inches when using heavy duty tooling tooling plate and 1.50 inches for extra heavy duty tooling plate on 54 Models. # Slot is closed on Models 54A and 5/8-18 on strokes longer than 6 inches. MODEL 54AG-12TH MODEL 54A-6BH MODEL 54BG-12T3 15

8 Four Shaft Thrusters Options External Bumper Option Linear Thrusters may be equipped with external urethane bumpers on both the extend and the retract strokes, and are absolutely essential when it is necessary to adjust or limit either stroke length. An extra set of shaft collars is supplied to prevent bumper movement on the extend stroke and included stainless steel washers protect the shaft seals from impact damage. Use of external bumpers between the housing and the tooling plate usually results in reduced cylinder return stroke. When full stroke is essential, compensate by increasing specified stroke. NOTE: The single shaft collars supplied with each Linear Thruster are intended for setup purposes only. They must not be used to limit the stroke or serious damage to the Linear Thruster may occur! External Bumper Options without Auxiliary Mounting Plate Stroke Reduction for YR & YB Options MODEL A L WITHOUT MOUNTING PLATE STROKE REDUCTION WITH MOUNTING PLATE External Bumper Options with Auxiliary Mounting Plate Hydraulic Shock Absorber Option Linear Thrusters may be equipped with hydraulic shock absorbers to dissipate the kinetic energy associated with stopping a moving load. The HE (shock ready on extend) and HR (shock ready on retract) options include tapped mounting holes in the Linear Thruster housing, one shaft mounted impact bracket, one shock absorber mounting bracket and mounting hardware. The HB option (shock ready on extend & retract) includes all hardware to mount shock absorbers on both the retraction and extension ends of the Linear Thruster. NOTE: Contact Ultramation for application specific support in sizing hydraulic shocks for the four shaft series of thrusters. 7

9 Four Shaft Thrusters Specifications Cylinder Specifications FLUID MAX OPERATING PRESSURE (psi) OPERATING TEMPERATURE BUNA-N SEALS VITON SEALS REPAIRABLE CYLINDER DESIGNATION - A B C D E F G H J K M N AIR AIR AIR AIR AIR HYD AIR / HYD AIR AIR AIR AIR AIR HYD / F to +200 F -40 to +250 F -10 F to +165 F 0 F to +400 F +10 to +350 F 0 F to +400 F No No No No Yes No Yes Yes Yes No No Yes Yes Sizing A pneumatic or hydraulic cylinder must be oversized to move a load. Otherwise, the cylinder will simply balance or hold the load in place. Pneumatic Linear Thrusters With pneumatic cylinders, the more the cylinder is oversized (either by bore size or by pressure) the faster the load will move. As a rule of thumb, slow speeds require a force about 25% greater than the load, moderate speeds require about 50% greater and fast speeds require about 100% greater. For a vertically mounted unit, determine how fast the cylinder must move and oversize the cylinder by either increasing the system pressure or the cylinder bore size by the desired speed factor. Note that the tooling plate and guide rod weights can be a significant portion of the total weight and should therefore be included in the force calculations. For horizontally mounted units moving a sliding load, the required force can be calculated by first multiplying the weight of the load by the coeffecient of friction of the two sliding surfaces. Then, use the same rules of thumb for oversizing the cylinder using the calculated force. Hydraulic Linear Thrusters Hydraulic cylinder speed (unlike that of a pneumatic cylinder) is not a function of cylinder oversizing but rather a function of fluid flow rate. Theoretical Force Table MODEL 44A 44B, 64A BORE (inches) 2 2-1/2 64B, 54A 3 54B 4 ROD DIA. (inches) 5/8 5/8 3/4 1 EFF. AREA (in 2 ) DIRECTION EXTEND RETRACT EXTEND RETRACT EXTEND RETRACT EXTEND RETRACT OPERATING PRESSURE (PSI) Unit Weights FOUR SHAFT SERIES TOOLING MODEL PLATE OPTION STD T5 T7 STD STD T5 T7 UNIT WEIGHT (LBS) (0.67 x Stroke) (0.67 x Stroke) (0.67 x Stroke) (1.16 x Stroke) (1.82 x Stroke) (1.82 x Stroke) (1.82 x Stroke) 8

Two Shaft Linear Thrusters

Two Shaft Linear Thrusters Two Shaft Linear Thrusters TWO SHAFT THRUSTERS Seven Models with bores from 9/16 to 4 Compact, light weight robust design Smooth linear motion CYLINDER Several manufacturers to choose from Pneumatic or

More information

Bimba Extruded Linear Thrusters 2X FF X EE DP 2X DD 2X Ø DD X EE DP U V W X Y Z R S Dimensions - ET T B 4X TAP AA THRU Ø BB C BORE X CC DP (OPP.SIDE)

Bimba Extruded Linear Thrusters 2X FF X EE DP 2X DD 2X Ø DD X EE DP U V W X Y Z R S Dimensions - ET T B 4X TAP AA THRU Ø BB C BORE X CC DP (OPP.SIDE) Bimba Extruded Linear Thrusters Engineering Specifications Maximum Operating Pressure 140 psi (10 bar) Temperature Range 15 to 160 degrees F (-10 to 70 degrees C) Expected Service Life 1,500 miles (with

More information

Linear Thrusters/PneuMoment

Linear Thrusters/PneuMoment /PneuMoment Extruded TE Series 3.3-3.10 3.11-3.16 T Series Multiple Position T4 Series Movable Housing 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 Pneu-Moment Checklist PneuMoment Pneumatic Actuators PneuMoment

More information

Linear Thrusters/PneuMoment

Linear Thrusters/PneuMoment /PneuMoment Extruded TE Series (Composite Bearings) 3.3-3.10 3.11-3.16 T Series Multiple Position T4 Series Movable Housing 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 Pneu-Moment Checklist PneuMoment Pneumatic

More information

Linear Thrusters/PneuMoment

Linear Thrusters/PneuMoment /PneuMoment Extruded 3.3-3.10 TE Series 3.11-3.16 T Series 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 PneuMoment Pneumatic Actuators PneuMoment Application 3.33 3.34-3.48 3.49 Bimba 304 stainless steel body

More information

Linear Thrusters/PneuMoment

Linear Thrusters/PneuMoment /PneuMoment Extruded 3.3-3.10 TE Series 3.11-3.16 T Series 3.17-3.22 3.23-3.24 3.25-3.28 3.29-3.32 PneuMoment Pneumatic Actuators PneuMoment Application 3.33 3.34-3.48 3.49 Pneu-Moment Bimba Pneu-Moment

More information

Linear Thrusters/PneuMoment

Linear Thrusters/PneuMoment /PneuMoment Extruded 3.3-3.10 TE Series (Composite Bearings) 3.11-3.16 T Series (Ball Bearings) 3.17-3.22 Multiple Position 3.23-3.24 NEW T4 Series 3.25-3.28 Checklist 3.29 PneuMomentPneumatic Actuators

More information

Features and Benefits

Features and Benefits ...........................................................3-14 Features and Benefits..............................................................................3 How To Order....................................................................................4

More information

PERFORMANCE DATA. The lightweight, durable, low-profile ROD CYLINDER SLIDES

PERFORMANCE DATA. The lightweight, durable, low-profile ROD CYLINDER SLIDES The lightweight, durable, low-profile H-Block design is the most versatile of our rod cylinder slides. It also has one of the highest ratings of load weight vs extension for its kind in the industry. The

More information

RT Series Roundline Plus Thrusters

RT Series Roundline Plus Thrusters 9/16" to 3" bore Composite and Roller Bearings PS magnetic piston option Optional ecology seal Optional shock absorbers Choice of high load composite or precision low friction bearings Comes with stroke

More information

Table of Contents. SH Series Linear Slides

Table of Contents. SH Series Linear Slides Table of Contents SH Series...3-17 Features and Benefits... 3 How To Order... 4 Dimensions...5-7 Specifications and Load Ratings....8-10 Mounting Options... 11 NuMate Mounting System.... 12 Multi-Position

More information

C-Series Cylinders: Table of Contents

C-Series Cylinders: Table of Contents C-Series Cylinders: Table of Contents C-Series C-Series Slide Features... pg. 2 CD and CE Series... pg. 3 Quick Reference... pg. 3 How to Order: C Series... pg. 4 Options: C Series... pg. Dimensional Data

More information

The Product Range. Technical Data

The Product Range. Technical Data The Product Range Section 3.1 - Basic Cylinder Bore sizes (mm): 10, 16, 25, 32, 40, 50 The basic cylinder series satisfies the support and guidance requirements of a great diversity of applications. Various

More information

Ultran Cylinders. Ultran Band Rodless Cylinders. Ultran High Load Slides. Ultran Application Checklist. Ultran High Load Electric Slides

Ultran Cylinders. Ultran Band Rodless Cylinders. Ultran High Load Slides. Ultran Application Checklist. Ultran High Load Electric Slides 5.3-5.4 5.5-5.12 5.13-5.23 5.24-5.32 Ultran Band Rodless 5.33-5.43 Ultran Application Checklist 5.44 Electric 5.45-5.53 Ultran Ultran Bimba Ultran SPACE SAVINGS OF ALMOST 50% IN MOST MODELS Two Models:

More information

Model 5-025, 5-050, &

Model 5-025, 5-050, & Model 5-025, 5-050, 5-075 & 5-150 7 Model 5-025, 5-050, 5-075 & 5-150 8 Eductor Block Exploded View Model 5-025, 5-050, 5-075 & 5-150 9 Figure 1 Item Part Name Model Model Model Model 5-025 5-050 5-075

More information

Position Control Hard chrome-plated carbon steel piston rod with blackened threads and wrench flats Sintered bronze rod bushing Internally lubricated

Position Control Hard chrome-plated carbon steel piston rod with blackened threads and wrench flats Sintered bronze rod bushing Internally lubricated Position Control System Products Cylinders 7.3-7.9 Cylinder Rod Lock 7.10-7.11 Cylinder Accessories 7.12-7.15 Pneu-Turn 7.16-7.24 Position Control System 7.25-7.36 Digital Panel Meter 7.37-7.42 Electronic

More information

The Price Alternative Pneumatic Cylinders and Slides

The Price Alternative Pneumatic Cylinders and Slides The Price Alternative Pneumatic Cylinders and Slides OCG Round Body Pneumatic ISO Air The Price Alternative OCQ Round Body Pneumatic ISO Air The Price Alternative OCV ISO Air The Price Alternative SERIES

More information

Z-Series.qxp:TurnAct Cseries.qxp 10/1/09 2:35 PM Page ii Z-Series Cylinders

Z-Series.qxp:TurnAct Cseries.qxp 10/1/09 2:35 PM Page ii Z-Series Cylinders Z-Series Cylinders Z-Series Cylinders: Table of Contents Z-Series Slide Features...pg. 2 ZD and ZE Series...pg. 3 Quick Reference...pg. 3 How to Order: Z Series...pg. 4 Options: Z Series...pg. 5 Dimensional

More information

Bimba Flow Controls. FQPS Series FQP & FCP Series. 3 For Technical Assistance: Controls. Flow. Thrusters. Linear.

Bimba Flow Controls. FQPS Series FQP & FCP Series. 3 For Technical Assistance: Controls. Flow. Thrusters. Linear. Bimba Flow Controls FCP FQP Flow Controls Adjusting Needle 3-Stage Tapered Stainless Steel Needle Chrome Plated Banjo Connector Adjusting Needle 3-Stage Tapered Stainless Steel Needle Locknut Chrome Plated

More information

Optimized for OEM requirements at a lower price.

Optimized for OEM requirements at a lower price. The Price Alternative Optimized for OEM requirements at a lower price. Series OSH Compact Pneumatic Slide Table - 4 s, Incremental Travels Series ORQ Compact Rotary Table - 6 s Series OCV Pneumatic ISO

More information

GRIPPERS GRIPPERS 178

GRIPPERS GRIPPERS 178 178 ol-o-matic s line of hardworking grippers are price competitive units, available in both angular and parallel styles and come in a range of six bore sizes (3/8", 5/8", 1", 1-1/2", 2" and 3") for a

More information

Series QP - QPR short-stroke cylinders 1/ Series QP: single and double-acting

Series QP - QPR short-stroke cylinders 1/ Series QP: single and double-acting CATALOGUE > Release 8.7 > Series QP - QPR cylinders Series QP - QPR short-stroke cylinders Series QP: single and double-acting, magnetic Series QPR: double-acting magnetic, non-rotating ø 2, 6, 20, 25,

More information

CAT.ES20-53 E. Dual-Rod Cylinder. Series CXS. CXS Dual-Rod Cylinder with Air Cushion Compact Type Series CXSJ. New:

CAT.ES20-53 E. Dual-Rod Cylinder. Series CXS. CXS Dual-Rod Cylinder with Air Cushion Compact Type Series CXSJ. New: CAT.ES-3 E Dual-Rod Cylinder Series New: Dual-Rod Cylinder with Air Cushion Compact Type Series J Dual-Rod Cylinder with guide function for pick-and-place applications Series! Twice the thrust Non-rotating

More information

Table of Contents. SRS Series...3-6

Table of Contents. SRS Series...3-6 Table of Contents SRS Series...3-6 Features and Benefits... 3 How to Order.... 4 Technical Specifications... 4 Critical Speed... 4 Dimensions... 5 Load Ratings... 5 Application Request for Belt and Screw

More information

Innovative Designs For Positive Parts Transfer

Innovative Designs For Positive Parts Transfer Innovative Designs For Positive Parts Transfer AUTO-SLIDE CATALOG CONTENTS Cylinder Powered Linear Slide (AFPRS ) 3 Cylinder Powered Bi-Directional Slide (AFPRBD) 6 V Style Pick & Place (AFPPV) 8 L Style

More information

Pneu-Turn Rotary Actuators

Pneu-Turn Rotary Actuators Pneu-Turn Rotary Actuators Pneu-Turn Actuators 4.3-4.14 Three-Position Pneu-Turn 4.15-4.17 Engineering Specifications/ Application Checklist 4.18-4.21 TURN TO THE BIMBA PNEU-TURN ROTARY ACTUATOR FOR THESE

More information

Electric Slide Solutions

Electric Slide Solutions Electric Slide Solutions Series ESCV Electric Thruster Slide Designed for vertical or non-rotating applications Built on the field proven Series SCV, the electric version offers many of the same benefits

More information

Heavy Duty Bench Top Presses

Heavy Duty Bench Top Presses Heavy Duty Bench Top Presses Model: BTP-501 (FOR SINGLE PISTON ROD, 5 BORE, MF1 MOUNT CYLINDERS) Model: BTP-502 (FOR TRA TRIPLE PISTON ROD, 5 BORE, MF1 MOUNT CYLINDERS) Heavy Duty Bench Top Press shown

More information

Linear Guides Pneumatic linear drive Series OSP - P Adaptive modular system The Ortman System Plus OSP provides a comprehensive range of linear guides

Linear Guides Pneumatic linear drive Series OSP - P Adaptive modular system The Ortman System Plus OSP provides a comprehensive range of linear guides PNEUMATIC GROUP Guides ORTMAN SYSTEM PLUS LINEAR GUIDES FOR OSP-P 19 Linear Guides Pneumatic linear drive Series OSP - P Adaptive modular system The Ortman System Plus OSP provides a comprehensive range

More information

Air Commander Part No , with air Part No , without air

Air Commander Part No , with air Part No , without air EASYSTREET Air Commander Part No. 27325, with air Part No. 27332, without air www.airliftcompany.com Please read these instructions completely before proceeding with installation. The oil level in the

More information

PBS Series Power Block Slide

PBS Series Power Block Slide PBS Series Power Block Slide www.numatics.com Table of Contents PBS Series Features and Benefits 3 How To Order 4 Technical Specifications 4 Dimensions 5 Quick Disconnect Cables 6 Switch Information 6-7

More information

Guided Slides and Guided Rods

Guided Slides and Guided Rods Guided Slides and Guided Rods Guided Slides & Guided Rods: Table of Contents Guided Slides & Guided Rods Guided Slides Product Features...pg 2 Quick Reference...pg 2 How to Order...pg 3 Dimensional Data...pg

More information

Series 83. Stainless Steel Mini Cylinder

Series 83. Stainless Steel Mini Cylinder Stainless Steel Mini Cylinder Magnet included in 7/8 and 1-1/4 bore only in double acting cylinder THEORETICAL CYLINDER FORCE (LBS). Operating Pressures (PSI) Size Action 25 50 75 100 125 150 3/4" Out

More information

Series OCG Pneumatic Cylinders

Series OCG Pneumatic Cylinders New Models The Price Alternative Series OCG Pneumatic Cylinders www.phdinc.com (8) 624-811 and Rebuildable round body cylinders 6 bore sizes standard stroke lengths High speed/double acting OCG2 ORDERING

More information

Table of Contents PBS Series Features and Benefits

Table of Contents PBS Series Features and Benefits Table of Contents PBS Series........................................... 3-6 Features and Benefits..................................................................................3 How To Order........................................................................................4

More information

CAT.ES20-53 E -UK. Dual-Rod Cylinder. Series CXS. CXS Dual-Rod Cylinder with Air Cushion Compact Type Series CXSJ. New:

CAT.ES20-53 E -UK. Dual-Rod Cylinder. Series CXS. CXS Dual-Rod Cylinder with Air Cushion Compact Type Series CXSJ. New: CAT.ES-3 E -UK Dual-Rod Cylinder Series New: Dual-Rod Cylinder with Air Cushion Compact Type Series J Dual-Rod Cylinder with guide function for pick-and-place applications Series! Twice the thrust Non-rotating

More information

KRONES DIRECT REPLACEMENTS

KRONES DIRECT REPLACEMENTS PLASTIC PACKAGING COMPONENTS GRO Quality Support Delivery SOLUTIONS A BLOW division MOLDING SOLUTIONS of PHD PLASTIC PACKAGING COMPONENTS P KRONES DIRECT REPLACEMENTS phdinc.com (800) 624-8511 INCREASE

More information

FULL COLOR TAB #11 IT AB121

FULL COLOR TAB #11 IT AB121 FULL COLOR TAB #11 IT AB121 208 AB121 Air SERIES: AUTO RECIPROCATING AIR BOOSTER Model Numbers: AB121 & AB221 This 2:1 ratio air-to-air booster is compact and self-contained. Unit incorporates integral

More information

Angular and Parallel Grippers

Angular and Parallel Grippers CAP0551_Grippers_R2.qxp:OEM_TA 2/8/17 2:16 PM Page ii Angular and Parallel Grippers Table of Contents: Grippers Angular Grippers, Parallel Grippers and Options & Accessories Angular Grippers Introduction...

More information

CUSTOM ADD-ONS FOR ENGLISH UNITS

CUSTOM ADD-ONS FOR ENGLISH UNITS Spindles Flange Piloted Slot Collet Jacobs Taper Morse Taper See note on next page for location in the Specification Code No. Description A B C AA Flange 2.625 3.619/3.621 5.313 AB Piloted Slot 2.3125

More information

OSP-P Series. Actuator Products Rodless Cylinders. Operating information. Material specifications. Features. Weight (mass) Size Comparison

OSP-P Series. Actuator Products Rodless Cylinders. Operating information. Material specifications. Features. Weight (mass) Size Comparison Standard Features: Double-acting with adjustable cushions With magnetic piston for position sensing Standard stroke lengths to 6000mm. Long stroke versions available upon request End cap can be rotated

More information

BRAKE WINCHES B1200B B1200G B2500 B2500G B3500 B1500 B1500G B1500

BRAKE WINCHES B1200B B1200G B2500 B2500G B3500 B1500 B1500G B1500 BRAKE WINCHES B1500 B1200B B1200G B1500 B1500G B2500 B2500G B3500 B1200B, B1200G B1500, B1500G B2500, B2500G B3500 X 6 650 lb/295 kg 1 1200 lb/545 kg 6 728 lb/330 kg 1 1500 lb/680 kg 3 1554 lb/705 kg 1

More information

P1Z Series. Magnetically Coupled Rodless Air Cylinders Contents

P1Z Series. Magnetically Coupled Rodless Air Cylinders Contents Magnetically Coupled Rodless Air Cylinders Contents Basic Version Features... 15 Ordering Information... 151 Specifications... 152 Technical Data... 153 Dimensions... 154 Mountings... 155 uided Version

More information

RexMover Series 277 & 297 Rodless Shuttle Cylinder

RexMover Series 277 & 297 Rodless Shuttle Cylinder Industrial Hydraulics Electric Drives and Controls Linear Motion and Assembly Technologies Pneumatics Service Automation Mobile Hydraulics RexMover Series 277 & 297 Rodless Shuttle Cylinder Catalog pages

More information

Flat Cylinders Flat-1 Square Flat-1 2.3-2.12 2.13-2.19 Flat Cylinders Flat-II Square Flat-II F02, F03, F04 (multiple power) FOP (multiple position) Flat Accessories Stainless Steel Flat-1 EF1 Cylinders

More information

Linear Guides Series OSP-P

Linear Guides Series OSP-P Linear Guides Series OSP-P NEW Contents Description Page Overview 31-32 Plain bearing guide SLIDELINE 33-34 Roller guide POWERSLIDE 35-38 Aluminium roller guide PROLINE 39-40 Recirculating ball bearing

More information

CAT.ES C. Compact Guide Cylinder. SeriesMGP. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. New end lock type introduced to Series MGP

CAT.ES C. Compact Guide Cylinder. SeriesMGP. ø12, ø16, ø20, ø25, ø32, ø40, ø50, ø63, ø80, ø100. New end lock type introduced to Series MGP CT.S-7 C Compact Guide Cylinder Series ø, ø, ø, ø2, ø, ø, ø, ø, ø, ø0 New end lock type introduced to Series . Top mount Compact Guide Cylinder Series ø, ø, ø, ø2, ø, ø, ø, ø, ø, ø0 Four mounting types

More information

SERIES SFP SLIDES INFORMATION SHEET. Ordering Data. U.S. Patent No. 6,857,780 International Patent No. CA PART NO.

SERIES SFP SLIDES INFORMATION SHEET. Ordering Data. U.S. Patent No. 6,857,780 International Patent No. CA PART NO. Ordering Data SERIES SFP SLIDES INFORMATION SHEET IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with slide installation and setup. File with maintenance or machine documentation.

More information

FULL COLOR TAB #12 BTP

FULL COLOR TAB #12 BTP FULL COLOR TAB #12 BTP 216 HEAVY DUTY BENCH PRESS BTP - How to MODEL: BTP-501 FOR SINGLE PISTON ROD, 5.00 BORE, MF1 MOUNT CYLINDERS Heavy Duty Bench Top Press shown with 5.00 Bore three (3) Stage Multi-Stage

More information

aluminum guide carriage cover with wiper and grease nipple roller hardened steel rail Example: PS 25/35 width of guide rail (35 mm)

aluminum guide carriage cover with wiper and grease nipple roller hardened steel rail Example: PS 25/35 width of guide rail (35 mm) Technical Data Versions for pneumatic linear drive: Series OSP-P aluminum guide carriage Roller Guide Powerslide Loads, Forces and Moments aluminum clamping rail hardened steel rail roller cover with wiper

More information

BTPSeries. BenchTopPress. Cylinders 95% OFOURCYLINDERSSHIPIN2-3DAYS! ONEDAYRUSHSERVICEAVAILABLEONALLCATALOGEDCYLINDERMODELS!

BTPSeries. BenchTopPress. Cylinders 95% OFOURCYLINDERSSHIPIN2-3DAYS! ONEDAYRUSHSERVICEAVAILABLEONALLCATALOGEDCYLINDERMODELS! BTPSeries BenchTopPress& BenchTopPress Page196 Press Page199 95% OFOURCYLINDERSSHIPIN2-3DAYS! ONEDAYRUSHSERVICEAVAILABLEONALLCATALOGEDCYLINDERMODELS! HEAVY DUTY BENCH PRESS BTP - How to MODEL: BTP-501

More information

GRB. long life Compact Angular gripper SHIPS IN 1-2 days. Major Benefits. Industry Uses

GRB. long life Compact Angular gripper SHIPS IN 1-2 days. Major Benefits. Industry Uses long life Compact Angular gripper SHIPS IN 1-2 days hardened steel jaws have robust design and include dowel holes for precise tooling location steel cover, jaw design, and tight jaw slots minimize external

More information

CATALOG FL-16-B THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES

CATALOG FL-16-B THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES HEAVY-DUTY CATALOG FL-6-B THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES TABLE OF CONTENTS CYLINDER FEATURES DOUBLE-ACTING Series T, TS, TL and TLS 4 DOUBLE-ACTING DOUBLE-ENDED Series TDE and TSDE 4 MAGNETIC

More information

MXP BAND CYLINDER MAXIMUM DURABILITY N INTERNAL BEARING S SOLID BEARING P PROFILED RAIL ENGR PB CC MG LS BC4 BC3 BC2 MXP ABT.

MXP BAND CYLINDER MAXIMUM DURABILITY N INTERNAL BEARING S SOLID BEARING P PROFILED RAIL ENGR PB CC MG LS BC4 BC3 BC2 MXP ABT. www.tolomatic.com MXP BAND CYLINDER N INTERNAL BEARING S SOLID BEARING P PROFILED RAIL CONTENTS N Internal Bearing Features... MXP_2 S Solid Bearing Features... MXP_4 P Profiled Rail Features... MXP_6

More information

Rodless cylinders. Standard magnetic version. High reliability and long lifetime. Low friction and good resistance to loads

Rodless cylinders. Standard magnetic version. High reliability and long lifetime. Low friction and good resistance to loads Rodless cylinders Standard magnetic version High reliability and long lifetime Low friction and good resistance to loads Installation in any position Mounting elements and switches can be ordered separately

More information

TABLE OF CONTENTS CYLINDER FEATURES MOUNTING STYLES DOUBLE-ACTING Series T and TS 4 DOUBLE-ACTING DOUBLE-ENDED Series TDE and TSDE 4 MAGNETIC SWITCH D

TABLE OF CONTENTS CYLINDER FEATURES MOUNTING STYLES DOUBLE-ACTING Series T and TS 4 DOUBLE-ACTING DOUBLE-ENDED Series TDE and TSDE 4 MAGNETIC SWITCH D HEAVY-DUTY CATALOG FL-6-A FLAIRLINE FAST Shipped in - days THE LIGHT-WEIGHT LINE WITH HEAVY-DUTY FEATURES TABLE OF CONTENTS CYLINDER FEATURES MOUNTING STYLES DOUBLE-ACTING Series T and TS 4 DOUBLE-ACTING

More information

CAT.ES20-53 E -UK. Dual-Rod Cylinder. Series CXS. CXS Dual-Rod Cylinder with Air Cushion Compact Type Series CXSJ. New:

CAT.ES20-53 E -UK. Dual-Rod Cylinder. Series CXS. CXS Dual-Rod Cylinder with Air Cushion Compact Type Series CXSJ. New: CAT.ES-3 E -UK Dual-Rod Cylinder Series CXS New: CXS Dual-Rod Cylinder with Air Cushion Compact Type Series CXSJ Dual-Rod Cylinder with guide functio for pick-and-place applications Series CXS! Twice the

More information

PTR Series Pneumatic Rack & Pinion Rotary Actuator

PTR Series Pneumatic Rack & Pinion Rotary Actuator zact14 Pneumatic Rack & Pinion Rotary Actuator Contents Features... 2 Specifications... 3 Dimensions... 4 Mounting Options... 5 Shaft Options... 6 Port Size and Location... 7 Cushions and Bumpers... 8

More information

WST Stopper Cylinder. Series WST. Specifications. How to adjust the shock absorber. Precautions. Shock absorber replacement

WST Stopper Cylinder. Series WST. Specifications. How to adjust the shock absorber. Precautions. Shock absorber replacement WST Stopper Cylinder Specifications Features Media Clean dry compressed air Operating Pressure Range 22 to 102 psi (1.5 to 7 Bar) Max* Pressure 145 psi (10 Bar) Operating Temperature Range 32 to 140 F

More information

Extruded Thrusters. Brochure

Extruded Thrusters. Brochure Extruded Thrusters Brochure Chrome plated stainless steel guide shafts optimize bearing performance Mounting flexibility: Through & C-bore Tapped bottom Tapped rear Bottom T-slots Bronze bushing for heavy

More information

Series HB Solid Brass Cylinders

Series HB Solid Brass Cylinders Series HB Solid Brass Cylinders For General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8,, Bores Magnetic piston available to operate Aurora stainless proximity

More information

UltranCylinders. UltranRodless Cylinders UltranRodless Slides UltranRodless Cylinders Ultran High Load Slides

UltranCylinders. UltranRodless Cylinders UltranRodless Slides UltranRodless Cylinders Ultran High Load Slides Ultran UltranRodless 5.3-5.4 UltranRodless 5.5-5.12 UltranRodless 5.13-5.23 Ultran High Load 5.24-5.32 NEW Ultran Band Rodless 5.33-5.42 Ultran Application Checklist 5.43 Ultran Bimba Ultran SPACE SAVINGS

More information

Multi-Act Integrated Motion Controller

Multi-Act Integrated Motion Controller Multi-Act Integrated Motion Controller Multi-Act Overview FEATURES 3 Multi-Act Dimensional Information DESCRIPTION Multi-Act s Integrated Motion Actuators have an output shaft which produces both linear

More information

Compact Slide. Series MXH ø6, ø10, ø16, ø20

Compact Slide. Series MXH ø6, ø10, ø16, ø20 Compact Slide Series ø, ø, ø, ø The use of an endless track linear guide produces a table cylinder having excellent rigidity, linearity and non-rotating accuracy. Endless track linear guide Series Variations

More information

HPS Powerslide-2 guided rodless cylinder

HPS Powerslide-2 guided rodless cylinder HPS Powerslide-2 guided rodless cylinder NEW SHOCK ABSORBER MOUNTING OPTIONS SEE PAGE 6 Introducing the Proximity Switches Hepco HPS Powerslide-2 The original Hepco Powerslide was the first ever bearing-based

More information

Series OCG Pneumatic Cylinders

Series OCG Pneumatic Cylinders The Price Alternative Series OCG Pneumatic Cylinders Repairable round body cylinders 6 bore sizes 1 standard stroke lengths High speed/double acting www.phdinc.com (8) 624-811 OCG1 ORDERING DATA DESIGN

More information

Series SS Solid Stainless Cylinders

Series SS Solid Stainless Cylinders Series SS Solid Stainless Cylinders Pneumatic to 200 PSI Hydraulic to 000 PSI Non shock 3/4, /8,, 2 Bore To Help Brighten Your Corner of the World. All exterior components 300 series stainless A U R O

More information

Pneumatic Linear Slides CATALOG LS-03

Pneumatic Linear Slides CATALOG LS-03 Pneumatic Linear Slides CATALOG LS-03 Product Index Introduction Engineering considerations for product selection...4-7 Quick reference guide to Fabco-Air linear slides... 8 New attachment method for dovetail

More information

SERIES PA SWING ARM CLAMPS for the Automotive Industry

SERIES PA SWING ARM CLAMPS for the Automotive Industry Pa SERIES PA SWING ARM CLAMPS for the Automotive Industry Ideal for a wide variety of automated part holding and transfer applications Copper Arm Switches Installed ORDERING DATA: SERIES PA CLAMPS INDEX:

More information

INFORMATION SHEET: SERIES SxL/SxH DESIGN 1 [5] SLIDES

INFORMATION SHEET: SERIES SxL/SxH DESIGN 1 [5] SLIDES INFORMATION SHEET: SERIES SxL/SxH DESIGN [] SLIDES IMPORTANT INFORMATION DO NOT DISCARD! Use this information sheet to assist with slide installation and setup. File with maintenance or machine documentation.

More information

22 mm Space required between the bottom of the cylinder body and your equipment is reduced. 24% Up to. Compact Guide Cylinder.

22 mm Space required between the bottom of the cylinder body and your equipment is reduced. 24% Up to. Compact Guide Cylinder. Compact Guide Cylinder Series ø2,,, ø2,,, ø, ø63,, ø0 Up to Weight reduced by up to 24% with a shorter guide rod and thinner plate 24% Weight reduced! 3 types of bearing can be selected. Slide bearing

More information

DURA-SCAPE CC-SERIES. Non-Rotating Air Cylinder CC-1 CC-2 TECHINICAL SPECIFICATION OPERATING PRINCIPLES

DURA-SCAPE CC-SERIES. Non-Rotating Air Cylinder CC-1 CC-2 TECHINICAL SPECIFICATION OPERATING PRINCIPLES CC Series of Non-Rotating Air Cylinders are designed as multi purpose units. The CC series is designed for applications where all the features of our SC series are not required, while still offering the

More information

Pneumatic Linear Slides

Pneumatic Linear Slides CATALOG LS-03 Prices Effective September 1, 2011 January 8, 2018 Pneumatic Linear Slides Product Index Introduction Engineering considerations for product selection...4-7 Quick reference guide to Fabco-Air

More information

22mm Space required between the bottom of the cylinder body and your equipment is reduced.

22mm Space required between the bottom of the cylinder body and your equipment is reduced. Compact Guide Cylinder ø2,,, ø2,,, ø0, ø63,, ø0 With air cushion Water resistant cylinder are now available. New Up to 7% Weight reduced! New Weight reduced by up to 7% with a shorter guide rod and thinner

More information

Series HB Solid Brass Cylinders

Series HB Solid Brass Cylinders Series HB Solid Brass Cylinders or General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8, /, Bores Magnetic piston available to operate Aurora stainless proximity

More information

PNEUMATIC 180 ANGULAR GRIPPER

PNEUMATIC 180 ANGULAR GRIPPER PNEUMATIC 180 ANGULAR GRIPPER Major Benefits Jaws rotate completely clear of work area eliminating an otherwise required axis of travel Three standard jaw rotations available: 60, 90, and 180 One piece

More information

Please read these instructions completely before proceeding with installation. Read all maintenance guidelines on page 7 before operating the vehicle.

Please read these instructions completely before proceeding with installation. Read all maintenance guidelines on page 7 before operating the vehicle. MN-643 (02511) ECR 5461 Kit No. 39205 Please read these instructions completely before proceeding with installation Item P/N Description Quantity A 26391 Driver-Side Beam Assembly 1 B 26414 Passenger-Side

More information

Series CXS ø6, ø10, ø15, ø20, ø25, ø32

Series CXS ø6, ø10, ø15, ø20, ø25, ø32 Variations Bore size Dual Rod Cylinder Series CXS ø6, ø, ø15, ø, ø25, ø32 Dual rod cylinder unit with guide function for pick & place applications Twice the thrust Through the adoption of dual rod construction,

More information

Pneumatic cylinders Compact cylinders Series P1J

Pneumatic cylinders Compact cylinders Series P1J Pneumatic cylinders Series P1J Catalogue 9127007282GB-ul Through mounting holes, tapped at both ends, for cylinder mounting. Return spring for single-acting variants. Stainless steel piston rod. Low-friction

More information

Position Control System

Position Control System Position Control System Products Cylinders 7.3-7.4 Cylinders Non-Contact 7.5-7.9 Cylinders 7.10-7.14 Cylinder Rod Lock 7.15-7.16 Cylinder Accessories 7.17-7.20 Pneu-Turn 7.21-7.29 Position Control System

More information

Active and Passive Brakes Series OSP-P

Active and Passive Brakes Series OSP-P Active and Passive Brakes Series OSP-P Contents Description Page Overview 51-52 Standard cylinder with Active brake 53-56 Plain bearing SLIDELINE with Active brake 33-34 Aluminium roller guide PROLINE

More information

TaskMaster Pneumatic Cylinder

TaskMaster Pneumatic Cylinder TaskMaster Pneumatic Cylinder Index TaskMaster Cylinders Index Air to 200 psi, 1-1/2" thru 6" Bore Page 1-1/2" thru 4" Bore Features & Specifications 2 (profile version) How to Order 3-5 Mounting Styles

More information

Series MGPS. Compact Guide Cylinder: ø50, ø80 MGP S Z73. How to Order. Applicable auto switches. Compact Guide Cylinder.

Series MGPS. Compact Guide Cylinder: ø50, ø80 MGP S Z73. How to Order. Applicable auto switches. Compact Guide Cylinder. Compact Guide Cylinder: Series S ø, Compact Guide Cylinder Compact guide cylinder Heavy duty guide rod type S Z73 mm mm How to Order Number of auto switches Nil S 2 pcs. 1 pc. Auto switch type Nil Without

More information

Standard Type Dual-Rod Cylinder. ø6, ø10, ø15, ø20, ø25, ø32. How to Order

Standard Type Dual-Rod Cylinder. ø6, ø10, ø15, ø20, ø25, ø32. How to Order Standard Type ual-rod ylinder Series ø, ø, ø, ø, ø2, ø32 ompact Type J M L M earing type Slide bearing all bushing bearing How to Order 0 Y7W S Number of auto switches Nil 2 pcs. S pc. n "n" pcs. ore size/standard

More information

Mechanically Jointed Hy-rodless Cylinder with Brake

Mechanically Jointed Hy-rodless Cylinder with Brake Mechanically Jointed y-rodless Cylinder with Brake Series ø, ø, ø Brake mechanism has been compactly integrated into the slide table which enables intermediate stops of the rodless cylinder. Large holding

More information

VOLUME 11. Rotary Actuators HYDRAULIC AND PNEUMATIC. w w w. m i c r o m a t i c l l c. c o m

VOLUME 11. Rotary Actuators HYDRAULIC AND PNEUMATIC. w w w. m i c r o m a t i c l l c. c o m VOLUME 11 Rotary Actuators HYDRAULIC AND PNEUMATIC w w w. m i c r o m a t i c l l c. c o m Welcome LP Models LOW PRESSURE PNEUMATIC 150 PSI 45 Standard Sizes 150 PSI Up to 570 in/lbs of of Torque Torque

More information

Mxp band cylinder MAXIMUM DURABILITY. N Internal Bearing S solid bearing P profiled rail.

Mxp band cylinder MAXIMUM DURABILITY. N Internal Bearing S solid bearing P profiled rail. www.tolomatic.com Mxp band cylinder N Internal Bearing S solid bearing P profiled rail Contents N Internal Bearing eatures..... MXP_2 S Solid Bearing eatures........ MXP_4 P Profiled Rail eatures.........

More information

240% 19% reduced. Compact Slide. MXH Series. Improved by up to. With new high rigidity linear guide. 369g. ø6, ø10, ø16, ø g.

240% 19% reduced. Compact Slide. MXH Series. Improved by up to. With new high rigidity linear guide. 369g. ø6, ø10, ø16, ø g. Compact Slide Series ø, ø, ø, ø RoHS Allowable moment MXS Improved by up to MXQ MXQ 2% MXF MXW MXJ MXP MXY With new high rigidity linear guide MTS Allowable moment improvement illustrated below Allowable

More information

Series HB Solid Brass Cylinders

Series HB Solid Brass Cylinders Series HB Solid Brass Cylinders or General Industrial Use in most nvironments 00 PSI Pneumatic 500 PSI Hydraulic Non shock,, /8, /, Bores Magnetic piston available to operate Aurora stainless proximity

More information

Rotary Actuators Actuators Three-Position Engineering Specifications/ Application Checklist 4.3-4.15 4.16-4.18 4.19-4.22 Rotary Actuators TURN TO THE BIMBA PNEU-TURN ROTARY ACTUATOR FOR THESE QUALITY FEATURES

More information

SERIES BCS STRETCH ROD CYLINDERS

SERIES BCS STRETCH ROD CYLINDERS BCS y Q ua lit Support SOLUTIONS for the Plastic Bottle Blowing Industry DIRECT REPLACEMENT FOR SIDEL SERIES AND SERIES MACHINES P U O C PACK TI A S y er iv el D ENTS GR N O G COM P IN G SERIES BCS STRETCH

More information

AB121Booster ITSeriesIntensifiers. Reservoirs&Tanks. ITSeries Page190

AB121Booster ITSeriesIntensifiers. Reservoirs&Tanks. ITSeries Page190 AB121 ITSeries Reservoirsand AB121 Page188 ITSeries Page190 Reservoirs& Page192 95% OFOURCYLINDERSSHIPIN2-3DAYS! ONEDAYRUSHSERVICEAVAILABLEONALLCATALOGEDCYLINDERMODELS! AB121 Air SERIES: AUTO RECIPROCATING

More information

NEN Series NFPA Aluminum Cylinders

NEN Series NFPA Aluminum Cylinders NEN Series NP luminum ylinders 1-1/2" to 4" bore sizes ompetitively priced Magnetic piston standard djustable cushion standard Sleeve nut construction standard Stocked strokes Technical data Medium: iltered

More information

SMA Aluminum Cylinders

SMA Aluminum Cylinders SMA Aluminum Cylinders PNEUMATIC TO 200 PSI HYDRAULIC 250 TO 400 PSI Non shock /8,, 2, 3 BORE SPACE SAVING AND CONVENTIONAL DESIGNS REPAIRABLE Very high quality Pancake type cylinders with all of the engineering

More information

Series OCQ Pneumatic Compact Cylinders

Series OCQ Pneumatic Compact Cylinders The Price Alternative Series OCQ Pneumatic Compact Cylinders Ten bore sizes available in incremental stroke lengths Standard shock pads reduce end of travel impact Standard magnets for switch sensing capability

More information

Field Installation of the Joystick Conversion Kit (DUAL CONTROL){1408, 5057, 5059, 5264, 5705}

Field Installation of the Joystick Conversion Kit (DUAL CONTROL){1408, 5057, 5059, 5264, 5705} Media Search - REHS1805 - Field Installation of the 233-5720 Joystick Conversion K Page 1 of 54 Special Instruction Field Installation of the 233-5720 Joystick Conversion Kit (DUAL CONTROL){1408, 5057,

More information

DURA-TRANS NB-SERIES. Bi-Directional Transfer NB-10 NB-20 TECHNICAL SPECIFICATION OPERATING PRINCIPLES 6-1.1

DURA-TRANS NB-SERIES. Bi-Directional Transfer NB-10 NB-20 TECHNICAL SPECIFICATION OPERATING PRINCIPLES 6-1.1 NB-SERIES NB Series of Bidirectional Transfer Devices, commonly known as tuckers, provide a practical low-cost method for automatic work positioning. The units are extremely compact and eliminate the need

More information

NFPA Double acting imperial cylinders

NFPA Double acting imperial cylinders > > Ø 4... 8 > > Adjustable captive cushion needle > > Constructed of the finest materials > > Magnetic piston standard > > Wide temperature range > > Shock and vibration tested to N 61373, Category 1,

More information

Linear Guides Series OSP-P

Linear Guides Series OSP-P Linear Guides Series OSP-P NEW NEW Contents Description Data Sheet No. Page Overview.4.E 3-3 Plain bearing guide SLIDELINE.4.E 33-34 Roller guide POWERSLIDE.4.3E 35-38 Ball bushing guide GUIDELINE.4.4E

More information

Compact Guide Cylinder Series MGP

Compact Guide Cylinder Series MGP Compact Guide Cylinder Series MGP ø2, ø, ø, ø, ø, ø, ø, ø,, ø0 MGJ MGP MGQ MGG MGC MGF MGZ MGT Series Variations Series Bearing type Cushion 2 0 Page Standard type MGP With air cushion MGP With end lock

More information