Electric Slide Solutions

Size: px

Start display at page:

Download "Electric Slide Solutions"

Jasper Grant
5 years ago
Views:

1 Electric Slide Solutions Series ESCV Electric Thruster Slide Designed for vertical or non-rotating applications Built on the field proven Series SCV, the electric version offers many of the same benefits as the pneumatic. Plus, you receive the design flexibility of Your Motor, Your Way features.

SERIES ESCV SLIDE simplified motor mounting system with online sizing and configurator PHD s Series ECV

backing for low wear, low friction and maintenance-free motion anodized aluminum alloy body Lead Screw Version

travels oil wicks internally lubricate guide shafts and bushings for maximum life Ball Screw Version modular

provide smooth, precise linear motion precision ball nut with wiper seals for increased lube retention and life

speed capability ball nut assembly fully guided for optimum alignment and stability over long travels and high

repeatability IP0 ingress protection Ideal for non-rotating applications Choice of Inline or Foldback Motor

controls flexibility at no additional cost Switch ready standard Foldback available in 1:1 or :1 drive for

2 SERIES ESCV SLIDE simplified motor mounting system with online sizing and configurator PHD s Series ECV Cylinder counterbored mounting holes for easy mounting of tooling and fixturing composite bushings with steel backing for low wear, low friction and maintenance-free motion anodized aluminum alloy body Lead Screw Version anodized aluminum alloy tool plate lead nut assembly fully guided for optimum alignment and stability over long travels oil wicks internally lubricate guide shafts and bushings for maximum life Ball Screw Version modular mounting patterns for easy attachment of tooling chrome plated steel rod precision ground hardened guide shafts provide smooth, precise linear motion precision ball nut with wiper seals for increased lube retention and life Major Benefits Electrically driven thruster slide based on the proven PHD Series SCV Slide High thrust and speed capability ball nut assembly fully guided for optimum alignment and stability over long travels and high speeds Precision screw assemblies with long service life Rigid construction with low backlash High degree of repeatability IP0 ingress protection Ideal for non-rotating applications Choice of Inline or Foldback Motor Mounting INLINE -QL11 Inline and foldback motor mounting flexibility Your Motor, Your Way allows motor and controls flexibility at no additional cost Switch ready standard Foldback available in 1:1 or :1 drive for tailored performance. FOLDBACK -QF11, -QF1 Copyright 018, by PHD, Inc. All Rights Reserved. Printed in the U.S.A. (800) -811

ORDERING DATA: SERIES ESCV SLIDE Example Ordering Data: E S C V 7 x 10 x - RB010 - AE - SAPK - QF11 - Wxxxx Slide Electromechanical Linear Actuator Cylinder C - ECV Series Compatible Type V -

3 ORDERING DATA: SERIES ESCV SLIDE Example Ordering Data: E S C V 7 x 10 x - RB010 - AE - SAPK - QF11 - Wxxxx Slide Electromechanical Linear Actuator Cylinder C - ECV Series Compatible Type V - Standard Light Duty Slide Bushing Metric Design Size Travel (Max) Ball Lead Size mm mm mm minimum travel in 0 mm increments Tool Plate Extension Additional distance between tool plate and bearing body in mm increments. Leave blank if additional extension is not required. Ball Screw Lead Screw Screw Configuration Size RB00 RB010 RB010 RB01 RB010 RB00 RL10 RL00 RL10 RL00 RL00 RL00 RL00 RL008 RL00 RL008 Lead mm Type AE - Travel adjust and shock pads on extend AR - Travel adjust and shock pads on retract Q1 - Corrosion resistant guide shafts H1 - Slide section only H - Cylinder replacement only Switch Options Switch Circuitry (rd Digit) B AC/DC Reed N NPN DC Solid State P PNP DC Solid State K Cable Type (th Digit) Quick Connect Meter Cable Quantity (th Digit) 1 1 Switch Switches Switches Switches Switches Switches 7 7 Switches 8 8 Switches 9 9 Switches Motor Configuration QF11 - Foldback with 1:1 ratio QF1 - Foldback with :1 ratio* QL11 - Inline with 1:1 ratio Blank - No Motor Mount *QF1 not available on sizes 0 and Motor Mount Code Wxxxx - Open architecture P/N code W Blank motor mount Blank - No motor mount NOTE: If switch option is ordered, switch(es) are included, but not installed. Cordsets for Quick Connect are ordered separately. SCREW CONFIGURATION The ball (RBxxx) and lead (RLxxx) screw drive systems of the Series ESCV are available in two lead choices. This provides flexibility when matching velocity and load requirements to the application. Refer to product specifications and sizing software for performance parameters. High lead for speed Low lead for thrust CORDSETS WITH QUICK CONNECT PART NO. CABLE LENGTH meter, wire meter, wire NOTE: This cordset is used for both -wire and -wire applications. When used in -wire applications, refer to the schematic and disregard the black wire. QFxx AE (ON BOTH GUIDE SHAFTS) QL11 SAxxx AR (ON BOTH GUIDE SHAFTS) Green shaded areas indicate options and are included in ordering code. (800) -811

4 ENGINEERING DATA: SERIES ESCV SLIDE BALL SCREW - RB SPECIFICATIONS BALL SCREW SERIES ESCV REPEATABILITY 1 ±0.010 mm [±0.000 in] MAXIMUM BACKLASH 0.0 mm [0.001 in] RATED LIFE Refer to Life vs. Thrust Chart (page ) FULL TRAVEL TOLERANCE 7 +./-0.0 mm [+0.18/ in] DUTY CYCLE 100% OPERATING TEMPERATURE - C [0-10 F] LUBRICATION INTERVAL Horizontal: 00 km [100 million in], Vertical: 100 km [0 million in] MECHANICS SPEED THRUST SPECIFICATIONS SIZE MAXIMUM TRAVEL mm [in] 00 [7.87] 00 [7.87] 0 [9.8] DRIVE MECHANISM Ball Screw SCREW DIAMETER mm SCREW CONFIGURATION -RB00 -RB010 -RB010 -RB01 -RB010 -RB00 SCREW LEAD mm/rev GUIDE SHAFT DIAMETER mm 1 0 GUIDE SHAFT BEARING TYPE Composite with Steel Backing Bushing MAXIMUM SPEED mm/sec [in/sec] 00 [19.] 1000 [9.] 1000 [9.] 100 [.0] 1000 [9.] 000 [78.7] MAXIMUM RPM rev/min 000 MAXIMUM ACCELERATION m/sec [in/sec ] 19. [77] MAXIMUM THRUST N [lbf] 10 [0] 80 [1] 0 [] 10 [] 10 [991] 10 [] NOMINAL THRUST N [lbf] 00 [90] 0 [7] 170 [8] 97 [19] 18 [1] 11 [1] TORQUE WEIGHT INERTIA PERMISSIBLE DRIVE TORQUE Nm [in-lb] 1.0 [10.].0 [8.0] 7.80 [9.0] NO-LOAD TORQUE Nm [in-lb] 0.1 [1.] 0.0 [.] 0.0 [.1] ZERO STROKE (WOT) kg [lb].1 [.88]. [7.0].7 [1.7] TOTAL LENGTH ADDER (WLT) kg/mm [lb/in] 0.00 [0.8] [0.] [0.8] ZERO STROKE (WOM) kg [lb] 0.80 [1.7] 1.0 [.09].9 [.9] MOVING LENGTH ADDER (WLM) kg/mm [lb/in] 0.00 [0.] [0.] [0.] ZERO STROKE (JO) kg-m [lb-in ].00 x 10 - [0.010] 1.0 x 10 - [0.01].8 x 10 - [0.1] LENGTH ADDER (JL) kg-m /mm [lb-in /in] 9.8 x 10-9 [0.0009].90 x 10-8 [0.00] 7.9 x 10-8 [0.009] MOVING WEIGHT ADDER (JM) kg-m /kg.1 x x x x x x 10 - [lb-in /lb] [9. x 10 - ] [.8 x 10 - ] [.8 x 10 - ] [9.8 x 10 - ] [.8 x 10 - ] [1. x 10 - ] MOTOR CONFIGURATION (JQ) -QF x 10 - [0.08].71 x 10 - [0.11]. x 10 - [0.19] -QF1 kg-m [lb-in ].7 x 10 - [0.09] 8.8 x 10 - [0.8] 1.91 x 10 - [0.] -QL11.1 x 10 - [0.011].11 x 10 - [0.01].0 x 10 - [0.18] NOTES: 1) UNIDIRECTIONAL ) AXIAL FREE PLAY WHEN DRIVE SHAFT LOCKED ) REFER TO OPERATING INSTRUCTIONS FOR RE-LUBRICATION DETAILS ) REFER TO PERFORMANCE CHARTS ON PAGE ) 00 km [100 MILLION in] LIFE ) CORRESPONDS TO MAXIMUM THRUST 7) FOR HOMING AND INCREASED APPLICATION FLEXIBILITY, INCLUDE EXTRA TRAVEL WHEN NECESSARY 8) ALL DIMENSIONS ARE FOR REFERENCE ONLY UNLESS SPECIFICALLY TOLERANCED. REFER TO ONLINE SIZING SOFTWARE FOR ACTUAL VALUES. WEIGHT AND INERTIAL CALCULATIONS: TOTAL WEIGHT = WOT + (WLT x TRAVEL) + MOTOR MOUNT WEIGHT [reference pages 8-9] TOTAL MOVING WEIGHT = WOM + (WLM x TRAVEL) + EXTERNAL PAYLOAD FOR -Qx11: INERTIA Reflected = JO + (J L x TRAVEL) + (JM x TOTAL MOVING WEIGHT) + JQ FOR -QF1: INERTIA Reflected = [JO + (JL x TRAVEL) + (JM x TOTAL MOVING WEIGHT)] / + JQ (800) -811

5 ENGINEERING DATA: SERIES ESCV SLIDE LEAD SCREW - RL SPECIFICATIONS LEAD SCREW SERIES ESCV REPEATABILITY 1 ±0. mm [±0.00 in] REVERSING BACKLASH 0.0 mm [0.008 in] RATED LIFE Refer to Online Sizing FULL TRAVEL TOLERANCE +./-0.0 mm [+0.18/ in] MAXIMUM DUTY CYCLE % OPERATING TEMPERATURE - C [0-10 F] LUBRICATION INTERVAL Horizontal: 00 km [0 million in], Vertical: 0 km [10 million in] MECHANICS SPEED SPECIFICATIONS SIZE MAXIMUM TRAVEL mm [in] 10 [.91] 10 [.91] 00 [7.87] 00 [7.87] 0 [9.8] DRIVE MECHANISM Lead Screw SCREW DIAMETER mm SCREW CONFIGURATION -RL10 -RL00 -RL10 -RL00 -RL00 -RL00 -RL00 -RL008 -RL00 -RL008 SCREW LEAD mm/rev GUIDE SHAFT DIAMETER mm GUIDE SHAFT BEARING TYPE Composite with Steel Backing Bushing MAXIMUM SPEED mm/sec [in/sec] 1 [0.] 80 [.1] 0 [1.0] 0 [.0] 0 [.0] 10 [.80] 80 [.1] 10 [.0] 80 [.1] 10 [.0] MAXIMUM RPM rev/min 100 MAXIMUM ACCELERATION m/sec [in/sec ] 0. [11.81] 1.0 [9.7] 0. [11.81] 1.0 [9.7] 0. [11.81] 1.0 [9.7] 0. [19.9] 1.0 [9.7] 0. [19.9] 1.0 [9.7] THRUST MAXIMUM THRUST N [lbf] 00 [7.] 10 [.7] 00 [11.0] 0 [.0] 800 [180.0] 00 [90.0] 100 [0.0] 800 [180.0] 00 [.0] 10 [81.0] TORQUE WEIGHT INERTIA PERMISSIBLE DRIVE TORQUE NO-LOAD TORQUE ZERO STROKE (WOT) TOTAL LENGTH ADDER (WLT) ZERO STROKE (WOM) MOVING LENGTH ADDER (WLM) ZERO STROKE (JO) LENGTH ADDER (JL) MOVING WEIGHT ADDER (JM) Nm [in-lb] Nm [in-lb] 0. [.] 0.7 [.0] 1. [10.]. [8.0] 7.8 [9.0] 0.09 [0.80] 0.1 [1.00] 0.1 [1.] 0.0 [.] 0.0 [.1] kg [lb] 1.09 [.1] 1. [.].1 [.7].1 [.9]. [1.] kg/mm [lb/in] [0.1] [0.1] 0.00 [0.7] [0.] [0.8] kg [lb] 0.0 [0.7] 0. [1.00] 0.7 [1.1] 1.0 [.8].0 [.] kg/mm [lb/in] kg-m [lb-in ] kg-m /mm [lb-in /in] kg-m /kg [lb-in /lb] [0.09] [0.1] [0.] [0.] [0.] 1. x 10 - [0.00].09 x 10 - [0.007].00 x 10 - [0.010] 1.0 x 10 - [0.01].8 x 10 - [0.1] 1.9 x 10-9 [0.0001].9 x 10-9 [0.00] 9.8 x 10-9 [0.0009].90 x 10-8 [0.00] 7.9 x 10-8 [0.009].80 x x x x x x x x x x 10-7 [.89 x 10 - ] [1.7 x 10 - ] [.89 x 10 - ] [1.18 x 10 - ] [1.18 x 10 - ] [. x 10 - ] [1.7 x 10 - ] [.1 x 10 - ] [1.7 x 10 - ] [.1 x 10 - ] MOTOR -QF11.9 x 10 - [0.09].9 x 10 - [0.09] 1.0 x 10 - [0.08].71 x 10 - [0.11]. x 10 - [0.19] kg-m CONFIGU- -QF1.7 x 10 [lb-in RATION (JQ) ] - [0.09] 8.8 x 10 - [0.8] 1.91 x 10 - [0.] -QL x 10 - [0.00] 1.89 x 10 - [0.00].1 x 10 - [0.011].11 x 10 - [0.01].0 x 10 - [0.18] NOTES: 1) UNIDIRECTIONAL ) VALUES CORRESPOND TO INITIAL (AS SUPPLIED NEW) CONDITION. DUE TO FRICTIONAL WEAR BACKLASH MAY INCREASE OVER TIME. ) REFER TO OPERATING INSTRUCTIONS FOR RE-LUBRICATION DETAILS ) REFER TO PERFORMANCE CHARTS ON PAGE ) CORRESPONDS TO MAXIMUM THRUST WEIGHT AND INERTIAL CALCULATIONS: TOTAL WEIGHT = WOT + (WLT x TRAVEL) + MOTOR MOUNT WEIGHT [reference pages 8-9] TOTAL MOVING WEIGHT = WOM + (WLM x TRAVEL) + EXTERNAL PAYLOAD FOR -Qx11: INERTIA Reflected = JO + (J L x TRAVEL) + (JM x TOTAL MOVING WEIGHT) + JQ FOR -QF1: INERTIA Reflected = [JO + (JL x TRAVEL) + (JM x TOTAL MOVING WEIGHT)] / + JQ (800) -811

6 PERFORMANCE CHARTS: SERIES ESCV SLIDE BALL SCREW - RB LIFE MILLION in [mm] LEAD SCREW - RL THRUST lbf [N] 1 [00] 11 [00] 90 [00] 7 [00] [00] [100] [1] Thrust/Velocity - Sizes & 0.0 [10] VELOCITY in/s [mm/s].9 [100] THRUST lbf [N] 0 [1800] 9 [100] 1 [100] 70 [100] [1000] 180 [800] 1 [00] 90 [00] [00] [1] Thrust/Velocity - Sizes & 0.0 [10].9 [100] VELOCITY in/s [mm/s].0 [10] 9.7 [1000] Size - RL10 Size - RL00 Size - RL10 Size - RL00 Size - RL00 Size - RL00 Size - RL00 Size - RL008 THRUST lbf [N] 7 [000] [00] 0 [000] 7 [100] [1000] 11 [00] [1] Thrust/Velocity - Size 0.0 [10].9 [100] VELOCITY in/s [mm/s].0 [10] 9.7 [1000] Size - RL00 Size - RL008 This section contains information on the capabilities of the Ball and Lead Screw Series ESCV. It is not intended to be a comprehensive selection guide. To simplify the selection process, or for deflection values, refer to PHD s sizing software. You may request application assistance from your distributor or PHD s Customer Service Department. (800) -811

7 DIMENSIONS: SERIES ESCV SLIDE U + TRAVEL A N K X Ø AA FOR DOWEL PIN R Ø W X THRU DIA & C BORE FOR DD SHCS QVA QJ V E F D UU B 1 E Ø QBA Ø QL h7 C LL X Ø BB FOR DOWEL PIN G X Y THREAD THRU FROM THIS SIDE C BORE FROM THE OPPOSITE SIDE FOR P SHCS KK + TRAVEL DOWEL HOLE TOLERANCES Ø DOWEL HOLE STANDARD DOWEL TOLERANCE +0.0 / / L H M SIZE BORE Ø A B C D E F G H K L M N P R U V W Y AA BB DD KK LL UU QBA QJ QL QVA M M x M M M x M M M8 x M M M10 x M M M1 x M DIMENSIONS: mm NUMBERS SHOWN IN INDICATE SLIDE POSITIONS All dimensions are reference only unless specifically toleranced. 7 (800) -811

OPTIONS: SERIES ESCV SLIDE QF11 QF1 FOLDBACK MOTOR MOUNTING WITH 1:1 DRIVE RATIO FOLDBACK MOTOR MOUNTING WITH :1 DRIVE RATIO (Not available on sizes and ) Foldback motor mounting with the QF11 option

The QF1 option provides a :1 drive ratio reduction for applications that require higher thrust.

8 OPTIONS: SERIES ESCV SLIDE QF11 QF1 FOLDBACK MOTOR MOUNTING WITH 1:1 DRIVE RATIO FOLDBACK MOTOR MOUNTING WITH :1 DRIVE RATIO (Not available on sizes and ) Foldback motor mounting with the QF11 option provides a 1:1 drive ratio allowing similar performance to the inline motor mounting in a shorter overall length. The QF1 option provides a :1 drive ratio reduction for applications that require higher thrust. If a blank motor mount is desired for special motor requirements, use -W0000 motor mount code to order a motor mount intended for customer modification. See page. MMD VARIES WITH MOTOR 1 MMJ 1:1 OR :1 DRIVE RATIO MOTOR MOUNTING IN POSITION 1 & ONLY X MMRT THD MMBG DP MIN MMK JJ MMR SQ QC + TRAVEL MME MMF QH MMG SIZE BORE Ø JJ MMD MIN MMD MAX MME MMF MMG MMJ (1:1) MMJ (:1) MMK MMR MMBG MMRT QC QH WEIGHT (kg) M x M x M x M x M8 x NOTES: 1) DIMENSIONS: mm ) NUMBERS SHOWN IN INDICATE SLIDE POSITIONS ) YOUR MOTOR, YOUR WAY MOTOR MOUNT -QFxx IS PROVIDED IN KIT FORM TO ALLOW ASSEMBLY OF MOTOR TO SLIDE ) KITS INCLUDE DIRECTIONS AND ALL PARTS REQUIRED TO ASSEMBLE SLIDE BASED ON -Wxxxx CODE SUPPLIED BY CUSTOMER ) WHEN (-W0000) IS SPECIFIED, PULLEY ID IS SUPPLIED WITH UNFINISHED ID Ø AND MOTOR MOUNTING PLATE IS SUPPLIED WITHOUT MOTOR MOUNTING FEATURES Typical Kit Contents Contents will vary with selected motor. (-W0000) Blank motor mounting plate 8 All dimensions are reference only unless specifically toleranced. (800) -811

OPTIONS: SERIES ESCV SLIDE QL11 INLINE MOTOR MOUNTING WITH 1:1 DRIVE RATIO Inline motor mounting with the QL11 option provides a 1:1 drive ratio with the lowest overall unit weight and height for

If a blank motor mount is desired for special motor requirements, use -W0000 motor mount code to order a motor mount intended for customer modification. See page.

9 OPTIONS: SERIES ESCV SLIDE QL11 INLINE MOTOR MOUNTING WITH 1:1 DRIVE RATIO Inline motor mounting with the QL11 option provides a 1:1 drive ratio with the lowest overall unit weight and height for high speed applications. The simple, low inertia design of the inline motor mounting allows for a cost effective solution with minimal assembly time. If a blank motor mount is desired for special motor requirements, use -W0000 motor mount code to order a motor mount intended for customer modification. See page. MMA MMB VARIES WITH MOTOR 1 QC + TRAVEL MCC SQ VARIES WITH MOTOR QE SIZE BORE Ø MMA MMB MIN MMB MAX MMC STANDARD MMC OVERSIZE QC QE STANDARD QE OVERSIZE WEIGHT (kg) NOTES: 1) DIMENSIONS: mm ) NUMBERS SHOWN IN INDICATE SLIDE POSITIONS ) YOUR MOTOR, YOUR WAY MOTOR MOUNT -QL11 IS PROVIDED IN KIT FORM TO ALLOW ASSEMBLY OF MOTOR TO SLIDE ) KITS INCLUDE DIRECTIONS AND ALL PARTS REQUIRED TO ASSEMBLE SLIDE BASED ON -Wxxxx CODE SUPPLIED BY CUSTOMER ) WHEN (-W0000) IS SPECIFIED, PULLEY ID IS SUPPLIED WITH UNFINISHED ID Ø AND MOTOR MOUNTING PLATE IS SUPPLIED WITHOUT MOTOR MOUNTING FEATURES Typical Kit Contents Contents will vary with selected motor. (-W0000) Blank motor mounting plate All dimensions are reference only unless specifically toleranced. 9 (800) -811

10 OPTIONS: SERIES ESCV SLIDE AE SHOCK PADS ON EXTENSION AR SHOCK PADS ON RETRACTION This option provides urethane shock pads on extension for crash protection, eliminating metal-to-metal contact as the stop collars reach the slide body. This option is not intended for travel adjustment. This option provides urethane shock pads on retraction for crash protection, eliminating metal-to-metal contact as the stop collars reach the slide body. This option is not intended for travel adjustment Ø B Ø B.0.0 C 10.0 (N) C.0.0 SIZE BORE Ø Ø B C N DIMENSIONS: mm Wxxx MOTOR MOUNT CODE Q1 CORROSION RESISTANT GUIDE SHAFTS Your Motor, Your Way customizable motor mounting is generated by PHD s extensive motor database at config.phdinc.com. Users may select their compatible motor of choice from the pre-populated motor database. In the event the chosen motor is not in the database, they may enter necessary motor features to generate the PHD motor mount code. The tailored motor mounting components are included with the specified driver and shipped in kit form. Extremely hard corrosion-resistant coating on the guide shafts for use in applications where moisture may corrode untreated hardened and ground shafts. End faces of the shafts remain uncoated. Consult PHD for fully coated shafts. H CYLINDER REPLACEMENT ONLY (WITHOUT SLIDE) H1 SLIDE REPLACEMENT ONLY (WITHOUT CYLINDER) This option provides complete ECVR Cylinder replacement and motor mounting is included/excluded based on ordering specifications. If motor mounting is desired, a full unit description is required. This option provides the slide mechanism only without cylinder or motor mounting. Included with option -H1 is all the hardware required for mounting standard PHD Series ECV Cylinders or pneumatic standard VDMA/ISO cylinders to the slide. 10 All dimensions are reference only unless specifically toleranced. (800) -811

11 OPTIONS: SERIES ESCV SLIDE SA SWITCH INCLUDED Switches are included, but not installed with this option. See option code to specify the switches to be included. NOTE: Cordsets for Quick Connect are ordered separately. CORDSETS WITH QUICK CONNECT PART NO. CABLE LENGTH meter, wire meter, wire NOTE: This cordset is used for both -wire and -wire applications. When used in -wire applications, refer to the schematic and disregard the black wire. SWITCH INCLUDED OPTIONS -SA x x x SWITCH CIRCUITRY CABLE TYPE QUANTITY B - AC/DC Reed K - Quick Connect 1-1 Switch N - NPN (Sink) DC Solid State - Meter Cable - Switches P - PNP (Source) DC Solid State - Switches - Switches - Switches - Switches 7-7 Switches 8-8 Switches 9-9 Switches CABLES MAY REQUIRE RESTRAINT TO PREVENT INTERFERENCE WITH GUIDESHAFT OR STOP COLLARS CYLINDER PLUG ASSEMBLED IN POSITION 1 AS STANDARD AND MAY INTERFERE WITH SWITCH SWITCHES: 0-1-0, & SB SA STOP COLLARS ON OPTION AE STANDARD GUIDESHAFTS 1-1, 1-1 & 17-1 Connector Detail.1..0 SC CABLE SWITCHES: 1-1, 1-1 & 17-1 ALLOWED IN POSITIONS 1 & ONLY SD SIZE BORE Ø SA SB SC SD * * ** NOTES: 1) DIMENSIONS: mm ) NUMBERS SHOWN IN INDICATE SLIDE POSITIONS ) SWITCHES MAY NOT BE ABLE TO BE ADJUSTED WHEN ALIGNED WITH STOP COLLARS * SWITCHES ONLY WORK IN POSITIONS 1 AND ** STOP COLLARS WILL INTERFERE WITH SWITCHES MOUNTED IN POSITIONS AND REPLACEMENT SERIES 0 REED SWITCHES PART NO. DESCRIPTION COLOR AC/DC Reed, Meter Cable (-SABx) Silver 17-1 AC/DC Reed, Quick Connect (-SABKx) Silver REPLACEMENT SERIES 0 SOLID STATE SWITCHES PART NO. DESCRIPTION COLOR NPN (Sink) DC Solid State, Meter Cable (-SANx) Brown PNP (Source) DC Solid State, Meter Cable (-SAPx) Tan 1-1 NPN (Sink) DC Solid State, Quick Connect (-SANKx) Brown 1-1 PNP (Source) DC Solid State, Quick Connect (-SAPKx) Tan All dimensions are reference only unless specifically toleranced (800) -811

12 PARTS LIST & REPAIR KITS: SERIES ESCV SLIDE 1A X 1B X 10 X 11 X 1C X SEE NOTE X 1 X 11 X 10 NOTES: 1) All part numbers listed are for standard unit ) Collar kits contain all parts for one end only ) ECV Cylinder assembly is not field repairable X PARTS LIST KEY DESCRIPTION ESCVxx 1 Housing Assembly Full unit description required -H80 1A Housing Sold as part of Housing Assembly 1B Bushing Sold as part of Bushing Repair Kit 1C Oil Wick Sold as part of Bushing Repair Kit Guide Shaft Full unit description required -H710 Tool Plate Full unit description required -H00 Cylinder Mounting Screw Sold as part of Mounting Fastener Kit Shaft Mounting Screw Sold as part of Mounting Fastener Kit ECV Cylinder Assembly Full unit description required -H 10 Stroke Adjustment Collar Sold as part of Stroke Adjustment Kit 11 Shock Pad Sold as part of Stroke Adjustment Kit KITS KIT DESCRIPTION ESCVxx Bushing Repair Kit Full unit description required -H0 Mounting Fastener Kit Full unit description required -H900 Stroke Adjustment Kit Full unit description required -H901 1 M /18 10

Electric Linear Solutions

Electric Linear Solutions High Performance Electric Solutions with PHD Proven Technology ESG Slides ESK/ESL Slides ECVA Cylinders Easy 3 Step Actuator & Motor Selection! NEW ECVR Cylinders Easy 3 Step