aluminum guide carriage cover with wiper and grease nipple roller hardened steel rail Example: PS 25/35 width of guide rail (35 mm)
|
|
- Anabel Bailey
- 6 years ago
- Views:
Transcription
1 Technical Data Versions for pneumatic linear drive: Series OSP-P aluminum guide carriage Roller Guide Powerslide Loads, Forces and Moments aluminum clamping rail hardened steel rail roller cover with wiper and grease nipple Series PS 16 to 50 for Linear-drive Series OSP-P Technical Data The Table shows the maximum permissible values for smooth operation, which should not be exceeded even under dynamic conditions. For further information and technical data see page 7 for linear drives OSP-P Example: PS 25/35 width of guide rail (35 mm) size of drive OSP-P25 * Please note: In the cushioning diagram, add the mass of the guide carriage to the mass to be cushioned. Features: anodized aluminum guide carriage with vee rollers having 2 rows of ball bearings hardened steel guide rail Several guide sizes can be used on the same drive corrosion resistance version available on request max. speed v = 3 m/s, tough roller cover with wiper and grease nipple any length of stroke up to 3500 mm, (longer strokes on request) Series For linear Max. moments Max. load Mass of linear drive Mass * drive (Nm) (N) with guide of guide (kg) carriage with increase per (kg) Mx My Mz Fy, Fz 0 mm stroke 100 mm stroke PS 16/25 OSP-P PS 25/25 OSP-P PS 25/35 OSP-P PS 25/44 OSP-P PS 32/35 OSP-P PS 32/44 OSP-P PS 40/44 OSP-P PS 40/60 OSP-P PS 50/60 OSP-P PS 50/76 OSP-P ) corrosion resistance version available on request (max. loads and moments are 25% lower) 51
2 Dimensions Dimensions Series OSP-P Stroke + 2 x A Stroke Threaded holes Z x EF deep Series A Z AA CC CF EE EF EG FF FS FT GG JJ PS 16/ xM PS 25/ xM PS 25/ xM PS 25/ xM PS 32/ xM PS 32/ xM PS 40/ xM PS 40/ xM PS 50/ xM PS 50/ xM
3 Technical Data Load F permissable unsupported length: PS 16/25, PS 25/25, PS 25/35, PS 25/44 PS 16/25 Loading 1 PS 16/25 Loading 2 PS 25/25 Loading 1 PS 25/25 Loading 2 PS 25/35 Loading 1 PS 25/35 Loading 2 PS 25/44 Loading 1 PS 25/44 Loading 2 distance between supports k Mid-Section Support (for versions, see accessories) Mid-Section supports are required from a certain stroke length to prevent exces sive deflection and vibration of the linear drive. The diagrams show the maximum permissible unsupported length in relation to loading. A distinction must be drawn between loading 1 and loading 2. Deflection of 0.5 mm max. between supports is permissible. permissable unsupported length: PS 32/35, PS 32/44 PS 32/35 Loading 1 PS 32/35 Loading 2 Note For speeds v > 0.5 m/s the distance between supports should not exceed 1m. Load F PS 32/44 Loading 1 PS 32/44 Loading 2 distance between supports k permissable unsupported length: PS 40/44, PS 40/60 loading 1 loading 2 Load F PS 40/44 Loading 1 PS 40/44 Loading 2 PS 40/60 Loading 1 PS 40/60 Loading 2 distance between supports k Load F permissable unsupported length: PS 50/60, PS 50/76 PS 50/60 Loading 1 PS 50/60 Loading 2 PS 50/76 Loading 1 PS 50/76 Loading 2 distance between supports k 53
4 Technical Data Service Life Calculation of service life is achieved in two stages: Determination of load factor LF from the loads to be carried Calculation of service life in km 1. Calculation of load factor L F Mx My Mz Fy L F = Mxmax Mymax Mz max Fymax Fz Fzmax with combined loads, L F should not exceed the value 1. Lubrication For maximum system life, lubrication of the rollers must be maintained at all times. Only high quality Lithium based greases should be used. Lubrication intervals are dependent on environmental conditions (temperature, running speed, grease quality etc.) therefore the installation should be regularly inspected. 2. Service life calculation for PS 16/25, PS 25/25, PS 25/35, Service life (km) = and PS 32/35 for PS 25/44, PS 32/44, PS 40/44, Service life (km) = PS 40/60 and PS 50/60: for PS 50/76: Service life (km) = 106 (LF + 0,02) (LF + 0,015) (LF + 0,015) 3 54
5 OSP-Guide Mountings Overview Mounting Type Type OSP Guides Type SLIDELINE POWERSLIDE PROLINE MULTIRAKE 16 1) ) 80 1) 16/ 25/ 25/ 25/ 32/ 32/ 40/ 40/ 50/ 50/ End cap mounting Type A1 X X Type A2 O O O Type A3 O O O End cap mounting, Type 1 X X X X X X X reinforced Type 3 Type 4 O O O Linear Drive Accessories Linear Drive Accessories Mountings for Linear Drives fitted with OSP-Guides For Linear-drives Series OSP-P Type 5 End cap mounting Type C1 X X X X X X X X Type C2 O O Type C3 O O O O Type C4 O O Mid-Section support, Type D1 X X X X X X X X X X X X X X X X X small Mid-Section support, Type E1 X X X X X X X X X X X X X X X X X wide Type E2 O O O O O Type E3 O O O O O O O O Type E4 O O O O Type E5 X O = carriage mounted in top (12 o'clock position) = carriage mounted in lateral (3 or 9 o'clock position) = available components 1) = not available for all sizes 55
6 End Cap Mountings End Cap Mountings Four internal screw threads are located in the end faces of all OSP actuators for mounting the drive unit. End cap mountings may be secured across any two adjacent screws. Series OSP-P16, 25, 32: Type A Linear Drive Accessories Material: Series OSP-16, 25, 32: Galvanized steel Series OSP-40,50, 63, 80: Anodized aluminum The mountings are supplied in pairs. Type A1 Type A2 Type A3 Series OSP-P16, 25, 32: Type Type 1 Type 3 Type 4 Type 5 Dimensions AE and AF (Dependent on the mounting type) Mount. Dimensions type Ae for size AF for size A A A C C C C Series OSP-P40, 50, 63, 80: Type C Type C1 Type C2 Type C3 Type C4 Series E e øu A AC AD CL DG OSP-P OSP-P OSP-P OSP-P OSP-P OSP-P OSP-P
7 Mid-Section Support Series OSP-P16 to 80: Type E (Mounting from above / below using a cap screw) Type E1 Type E2 Type E3 Type E4 Type E5 Linear Drive Accessories Mid-Section Support Information regarding type E1 and D1: Mounting of the Mid-Section supports is also possible on the lower side of the drive. In this case, please note the new center line dimensions. Stainless steel version on request. Series OSP-P16 to 80: Type D1 (Mounting from below with thread screw) Dimensions AF and DR (Dependent on the mounting type) Mount. Dimensions DR type for size Dimensions AF for size D E E E E E Series R U UU DE DF DH DK DM DN DO DP DQ DS DT EF EM EN EQ OSP-P16 M OSP-P25 M OSP-P32 M OSP-P40 M OSP-P50 M OSP-P63 M OSP-P80 M Ordering information for mountings Type A Type Type C Type D Type E Mounting type (versions) Order No. size A1 *) A2 *) A3 *) *) *) *) *) C1 *) C2 *) C3 *) C4 *) D E E E E E (* Pair 57
8 Ordering Information Ordering Instructions / Part Numbering System for OSP-P POWERSLIDE Series OSPP S G ore Piston Style 1 Tandem Air Connections / Porting (position #2) 1 end face (position #5) 2 single end porting 3 left stand (pos #2), right end face (pos#5) 4 right stand (pos #2), left end face (pos #5) 6 single end porting end face A 3/2 Way valve VOE 24V = (25,32,40,50) 3/2 Way valve VOE 220V~/110V= (25,32,40,50) C 3/2 Way valve VOE 48V=(25,32,40,50) E 3/2 Way valve VOE 110V~ (25,32,40,50) Note: Single End Porting on 16mm bore, then end caps cannot be rotated. Seals 1 Viton Lubrication 1 Slow Speed 4 Food 5 Clean Room Corrosion Resist, Hardware 1 Stainless Stroke x x x x x Cushioning / Stops Piston Mountings 0 none Guides / rakes E PSXX/25 Powerslide (16,25) F PSXX/35 Powerslide (25,32) G PSXX/44 Powerslide (25,32,40) H PSXX/60 Powerslide (40,50) I PSXX/76 Powerslide (50) End Cap Position 0 l+r 0 = in front (pos #2) 1 l+r 90 = underneath (pos #3) 2 l+r 180 = at the back (pos # 4) 3 l+r 270 = same face as outerband (pos #2,1) 4 l 90 = underneath; r 0 = in front (pos #3,2) 5 l 180 = at the back; r 0 = in front (pos #4,2) 6 l 270 = same face as outerband; r 0 = in front (pos #1,2) 7 l 0 = in front; r 90 = underneath (pos #2, 3) 8 l 180 = at the back; r 90 = underneath (pos #4,3) 9 l 270 = same face as outerband; r 90 = underneath (pos #1,3) A l 0 = in front; r 180 = at the back (pos #2,4) l 90 = underneath; r 180 = at the back (pos #3,4) C l 270 = same face as outerband; r 180 = at the back (pos #1,4) D l 0 = in front; r 270 = same face as outerband (pos #2,1) E l 90 = underneath; r 270 = same face as outerband (pos #3,1) F l 180 = at the back; r 270 = same face as outerband (pos #4,1) Dovetail Cover X Without Cover Rail End Cap Mounts 0 without 1 A1 (16,25,32) 2 A2 (16,25,32) 3 A3 (25,32) 4 1 (25,32) 6 3 (16) 7 4 (25,32) 8 5 (32) 9 C1 (40,50) A C2 (40,50) C3 (40,50) C C4 (40,50) Note: Comes in pairs Version Switches / Measuring System 0 none 1 NO Reed- KL3045 Qty. 2 2 NC Reed- KL3048 Qty. 2 3 PNP KL Qty. 2 4 NPN KL Qty. 2 X SFI 0,1mm Y SFI 1mm Z 4650 SFA Note: 2 switches will be supplied. For different quantity, please order as a separate line item. add. Carriage 0 without E Guide Carriage Powerslide PSXX/25 (16,25) F Guide Carriage Powerslide PSXX/35 (25,32) G Guide Carriage Powerslide PSXX/44 (25,32,40) H Guide Carriage Powerslide PSXX/60 (40,50) Note: Position #2 is the standard location. 58
Active and Passive Brakes Series OSP-P
Active and Passive Brakes Series OSP-P Contents Description Page Overview 51-52 Standard cylinder with Active brake 53-56 Plain bearing SLIDELINE with Active brake 33-34 Aluminium roller guide PROLINE
More informationActive and Passive Brakes Series OSP-P
Active and Passive Brakes Series OSP-P Contents Description Data Sheet No. Page Overview P-1.42.001E 69-70 Standard cylinder with Active brake P-1.42.002E 71-74 Plain bearing SLIDELINE with Active brake
More informationOSP-P Series. Actuator Products Rodless Cylinders. Operating information. Material specifications. Features. Weight (mass) Size Comparison
Standard Features: Double-acting with adjustable cushions With magnetic piston for position sensing Standard stroke lengths to 6000mm. Long stroke versions available upon request End cap can be rotated
More informationLinear Guides Series OSP-P
Linear Guides Series OSP-P NEW Contents Description Page Overview 31-32 Plain bearing guide SLIDELINE 33-34 Roller guide POWERSLIDE 35-38 Aluminium roller guide PROLINE 39-40 Recirculating ball bearing
More informationLinear Guides Pneumatic linear drive Series OSP - P Adaptive modular system The Ortman System Plus OSP provides a comprehensive range of linear guides
PNEUMATIC GROUP Guides ORTMAN SYSTEM PLUS LINEAR GUIDES FOR OSP-P 19 Linear Guides Pneumatic linear drive Series OSP - P Adaptive modular system The Ortman System Plus OSP provides a comprehensive range
More informationLinear Guides Series OSP-E
Linear Guides Series OSP-E NEW Contents Description Page Overview 101-102 Plain Bearing SLIDELINE 103-104 Roller Guide POWERSLIDE 105-108 Aluminium Roller Guide PROLINE 109-111 Heavy-duty guide HD 113-115
More informationPNEUMATIC GROUP Brakes ORIGA SYSTEM PLUS
PNEUMATIC GROUP Brakes ORIGA SYSTEM PLUS HOLDING DEVICES AND BRAKES FOR OSP-P 35 OSP ORIGA SYSTEM PLUS Holding Devices and Brakes Holding Device for pneumatic linear drive Series OSP-P Piston diameters
More informationLinear Guides Series OSP-E
Linear Guides Series OSP-E NEW Contents Description Data Sheet No. Page Overview 1.40.020E 101-102 Plain Bearing SLIDELINE 1.40.021E 103-104 Roller Guide POWERSLIDE 1.40.022E 105-108 Aluminium Roller Guide
More informationLinear Guides Series OSP-P
Linear Guides Series OSP-P NEW NEW Contents Description Data Sheet No. Page Overview.4.E 3-3 Plain bearing guide SLIDELINE.4.E 33-34 Roller guide POWERSLIDE.4.3E 35-38 Ball bushing guide GUIDELINE.4.4E
More informationOSP-P Pneumatic Rodless Cylinders and Linear Guides
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding OSP-P Pneumatic Rodless Cylinders and Linear Guides Catalog 0980 Warning,
More informationCylinders. Series OSP-P
Standard System Concepts & Components... 2-3 Ordering information... 4-5 Components... 6-7 Technical Data... 8-10 Dimensions... 11-14 3/2 Way Valves VOE... 15-16 Active rakes... 17-18 Accessories (Mounts
More informationPneumatic Linear Drives OSP-L ORIGA SYSTEM PLUS
Pneumatic Linear Drives OSP-L ORIGA SYSTM PLUS Contents Linear Drives OSP ORIGA SYSTM PLUS The right to introduce technical modifications is reserved Origa System Plus Page Introduction - OSP Concept
More informationHPS Powerslide-2 guided rodless cylinder
HPS Powerslide-2 guided rodless cylinder NEW SHOCK ABSORBER MOUNTING OPTIONS SEE PAGE 6 Introducing the Proximity Switches Hepco HPS Powerslide-2 The original Hepco Powerslide was the first ever bearing-based
More informationPneumatic Linear Drives OSP-L ORIGA SYSTEM PLUS
Pneumatic Linear Drives OSP-L ORIGA SYSTEM PLUS Contents Linear Drives OSP ORIGA SYSTEM PLUS Introduction OSP Concept Page Overview OSP-L 2 Modular Components Overview 3 Control Examples for OSP-L 4 OSP-L
More informationHPS Powerslide-2 guided rodless cylinder
HPS Powerslide-2 guided rodless cylinder NEW SHOCK ABSORBER MOUNTING OPTIONS SEE PAGE 6 Introducing the Hepco HPS Powerslide-2 The original Hepco Powerslide was the first ever bearing-based guided rodless
More informationLinear Guides Series OSP-E
inear Guides Series OSP-E Contents Description Page Overview 115-116 Plain Bearing SIDEINE 117-118 Roller Guide POWERSIDE 119-122 Ball Bushing Guide GUIDEINE 123-126 Aluminium Roller Guide PROINE 127-129
More informationOSP-P Series. Actuator Products Rodless Cylinders. Operating information. Material specifications. Features. Weight (mass) Size Comparison
Standard Features: Double-acting with adjustable cushions With magnetic piston for position sensing Standard stroke lengths to 6000mm. Long stroke versions available upon request End cap can be rotated
More informationRodless Pneumatic Cylinders Series OSP-P
Rodless Pneumatic Cylinders Series OSP-P System Concepts & Components... 2-5 Technical Data... 7-9 Dimensions... 10-15 Active rakes... 16-19 Accessories (Mounts & Supports)... 20-29 Ordering Information...30
More informationOSP-P Series Pneumatic Rodless Cylinders and Guides Catalog 0951
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding OSP-P Series Pneumatic Rodless Cylinders and Guides Catalog 0951 Warning,
More informationORIGA Pneumatic Linear Drives OSP-L
ORIGA Pneumatic Linear Drives OSP-L Very long lifetime and lowest leakage A NEW Modular Linear Drive System With this second generation linear drive Parker Origa offers design engineers complete flexibility.
More informationORIGA SYSTEM PLUS OSP-P
ORIGA SYSTEM PLUS OSP-P The ORIGINAL rodless pneumatic cylinders A NEW Modular Linear Drive System With this second generation linear drive Parker Origa offers design engineers complete flexibility. The
More informationORIGA SYSTEM PLUS. Modular Pneumatic Linear Drive Systems
ORIGA SYSTEM PLUS Modular Pneumatic Linear Drive Systems HOERBIGER-ORIGA News The HOERBIGER-ORIGA Rodless Cylinders are also available for use in potentially explosive atmospheres. The Cylinders are to
More informationModular Electric Actuators OSP-E ORIGA SYSTEM PLUS
Modular Electric Actuators OSP-E ORIGA SYSTEM PLUS Sizing Performance Overview Maximum Loadings Sizing of Actuator The following steps are recommended for selection : 1. Check that maximum values in the
More informationRodless Pneumatic Cylinders Series OSP-P
Rodless Pneumatic Cylinders Series OSP-P Contents Description Data Sheet No. Page Standard Cylinders Overview P-1.10.001E 9-13 Technical Data P-1.10.002E-1 to 3 15-17 Dimensions P-1.10.002E-4 to 9 18-23
More informationLinear Drive with Ball Screw Drive Series OSP-E..SB
Linear Drive with Ball Screw Drive Series OSP-E..SB Contents Description Data Sheet No. Page Overview 1.30.001E 47-50 Technical Data 1.30.002E-1 to 5 51-55 Dimensions 1.30.002E-6, -7 56-57 Order instructions
More informationContents Linear Drives Introduction OSP Concept 3 Modular Components Overview 4 Control Examples for OSP-P 6 OSP-P Application Examples 7 Page Rodless
PNEUMATIC Attention! All dimensions are in European-Standard. Please convert all in US-Standard. Conversion Table Multiply By To Obtain Millimeters.03937 Inches Newtons.2248 Lbs. (F) Bar 14.5 PSI Newtons-Meters
More informationLinear Drive with Toothed Belt Series OSP-E..B. Contents Description Overview Technical Data Dimensions Order Instructions 46
Linear Drive with Toothed Belt Contents Description Page Overview 35-38 Technical Data 39-43 Dimensions 44-45 Order Instructions 46 35 The System Concept ELECTRIC LINEAR DRIVE FOR POINT-TO-POINT APPLICATIONS
More informationLinear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 89
Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 79-82 Technical Data 83-88 Dimensions 89 79 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS
More informationLinear Drive with Toothed Belt and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Series OSP-E..BHD
Linear Drive with and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Contents Description Page Overview 11-14 Version with Recirculating Ball Bearing Guide Technical Data 15-17
More informationRodless Pneumatic Cylinders Series OSP-P
s Series OSP-P Contents Description Page Standard Cylinders Overview 9-13 Technical Data 15-17 Dimensions 18-23 Clean Room Cylinders Technical Data 24-25 Dimensions 26 Cylinders ATEX-Version Technical
More informationRodless Pneumatic Cylinders Series OSP-P
Rodless Pneumatic Cylinders Series OSP-P Contents Description Data Sheet No. Page Standard Cylinders Overview 1.10.001E 9-13 Technical Data 1.10.002E-1 to 3 15-17 Dimensions 1.10.002E-4 to 9 18-23 Order
More informationM/46800/M, M/46800/HM, M/46800/PM
External guides for heavy loads over long distances Rigid, reinforced aluminium profile provides greater load support T-slots in the outer profile enable individual mounting options Precision guidance
More informationLinear Drive-Accessories (Mountings and Magnetic Switches) Series OSP-P
- (Mountings and Magnetic Switches) Series OSP-P Contents Description Page Overview 65-66 Clevis Mounting 67-68 End Cap Mountings 69 End Cap Mountings (for s with guides) 71, 72, 74, 75 Mid-Section Support
More informationModular Pneumatic Linear Drive Systems ORIGA SYSTEM PLUS
Modular Pneumatic Linear Drive Systems ORIGA SYSTEM PLUS Parker Origa Origa rodless pneumatic cylinders are the first rodless cylinders that have been approved for use in potentially explosive atmospheres
More informationLinear Actuator with Toothed Belt Series OSP-E..B
Linear Actuator with Toothed Belt Series OSP-E..B Contents Description Data Sheet No. Page Overview 1.20.001E 21-24 Technical Data 1.20.002E-1 to 5 25-29 Dimensions 1.20.002E-6 30 Order Instructions 1.20.002E-7
More informationLinear Actuator with Ball Screw Series OSP-E..S. Contents Description Overview Technical Data Dimensions 79
Linear Actuator with Ball Screw Series OSP-E..S Contents Description Page Overview 71-74 Technical Data 75-78 Dimensions 79 71 The System Concept ELECTRIC LINEAR ACTUATOR FOR HIGH ACCURACY APPLICATIONS
More informationRODLESS CYLINDER - PARKER ORIGA CURSOR
ORIGA SYSTEM PERMANENT EXTERNAL SHEET INTERNAL SHEET CURSOR CUSHIONING SCREW BARREL PISTON END CAP The exclusive principle ORIGA solves in a simple way every problem about linear transaltion. This brilliant
More informationModular Electric Actuators OSP-E ORIGA SYSTEM PLUS
Modular Electric Actuators OSP-E ORIGA SYSTEM PLUS Contents Modular Electric Actuators OSP Concept Origa System Plus Electric Actuator OSP-E, Modular Components - Overview Page 4 Applications for OSP-E
More informationRodless cylinders. Standard magnetic version. High reliability and long lifetime. Low friction and good resistance to loads
Rodless cylinders Standard magnetic version High reliability and long lifetime Low friction and good resistance to loads Installation in any position Mounting elements and switches can be ordered separately
More informationModular Electric Actuators OSP-E ORIGA SYSTEM PLUS
Modular Electric Actuators ORIGA SYSTEM PLUS Contents Modular Electric Actuators OSP Concept Origa System Plus Electric Actuator, Modular Components - Overview 4 Applications for Actuators 8 Belt Actuator..BHD,
More informationModular Electric Actuators OSP-E ORIGA SYSTEM PLUS
Modular Electric Actuators OSP-E ORIGA SYSTEM PLUS Mounting Dimensions for Motor and Gears Code Description A B* D E F G for motor and gears with clearance mounting holes A0 SY563T 66,50 M4 38,10 2,50
More informationOSP-E Series Electric Linear Drives and Guides ENGINEERING YOUR SUCCESS. Catalog aerospace. electromechanical
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding OSP-E Series Electric Linear Drives and Guides Catalog 0950-2 ENGINEERING
More informationORIGA SYSTEM PLUS. Modular Electric Linear Drive Systems
ORIGA SYSTEM PLUS Modular Electric Linear Drive Systems 1 2 3 4 5 6 7 8 9 1 0 OSP ORIGA SYSTEM PLUS ELECTRIC ACTUATOR 2D & 3D CAD Drawings can be downloaded from website www.hoerbigeroriga.com 1 2 3 4
More informationVertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV
Vertical Linear Drive with and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Overview...25-28 Technical Data...29-31 Dimensions...32-33 25 Features TOOTHED BELT DRIVE FOR VERTICAL MOVEMENTS
More informationThe Product Range. Technical Data
The Product Range Section 3.1 - Basic Cylinder Bore sizes (mm): 10, 16, 25, 32, 40, 50 The basic cylinder series satisfies the support and guidance requirements of a great diversity of applications. Various
More informationModular Pneumatic Linear Drive Systems ORIGA SYSTEM PLUS
Modular Pneumatic Linear Drive Systems ORIGA SYSTM PLUS Parker Origa rodless pneumatic cylinders are the first rodless cylinders that have been approved for use in potentially explosive atmospheres in
More informationModular Electrical Linear Drives Catalog 0950
aerospace climate control electromechanical filtration fluid & gas handling hydraulics pneumatics process control sealing & shielding Modular Electrical Linear Drives Catalog 0950 OSP-E Series Electric
More informationORIGA SYSTEM PLUS. Modular Electric Linear Drive Systems
ORIGA SYSTEM PLUS Modular Electric Linear Drive Systems OSP ORIGA SYSTEM PLUS ELECTRIC ACTUATOR Attention! Contact Hoerbiger-Origa for sizing software and/or technical assistance 630-871-8300 Application
More informationVertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV
Vertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Contents Description Page Overview 25-28 Technical Data 29-33 Dimensions 34 Order Instructions 35
More informationVertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV
Vertical Linear Drive with and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Contents Description Page Overview 25-28 Technical Data 29-31 Dimensions 32-33 25 Parker Hannifin Corporation
More informationMax. particle size 5 µm. Pressure for determining piston forces. Materials:
Rodless cylinders Rodless cylinder 1 Working pressure min./max. 2 bar / 8 bar Ambient temperature min./max. -10 C / +60 C Medium Compressed air Max. particle size 5 µm Oil content of compressed air 0 mg/m³
More informationM/146000, M/146100, M/146200
LINTR PLUS rodless cylinders Magnetic piston and non-magnetic piston Double acting Ø 3 to 50 mm New lightweight design extrusion with universal mounting grooves Proved and patented sealing system Dust
More informationOSPE..BHD Belt-Driven Actuators
OSPE..BHD Belt-Driven Actuators Actuators for High-Speed, Long Travel, Heavy Duty Applications The OSPE..BHD is the highest capacity belt-driven actuator in the OSPE family. The integrated ball bearing
More informationA44000, LINTRA-LITE Rodless Cylinders Non-magnetic and Magnetic Piston, double acting
> > Ø 25... 40 mm > > New compact, spacesaving design > > Proven sealing system > > Integral switch mounting > > uffer or adjustable cushioning > > Standard foot mountings Technical features Medium: Compressed
More informationSERIES RTC RODLESS CYLINDERS PNEUMATIC SHUTTLE TYPE
SERIES RTC RODLESS CYLINDERS PNEUMATIC SHUTTLE TYPE Series RTC Rodless Cylinder Pneumatic automation building block Series RTC (Rodless Thrust Cylinder)-High performance shuttle type rodless cylinders
More informationMXP BAND CYLINDER MAXIMUM DURABILITY N INTERNAL BEARING S SOLID BEARING P PROFILED RAIL ENGR PB CC MG LS BC4 BC3 BC2 MXP ABT.
www.tolomatic.com MXP BAND CYLINDER N INTERNAL BEARING S SOLID BEARING P PROFILED RAIL CONTENTS N Internal Bearing Features... MXP_2 S Solid Bearing Features... MXP_4 P Profiled Rail Features... MXP_6
More informationCURVE AND LINEAR TRACK
URVE AND LINEAR TRAK About US SAIBO is one of world recognized leaders in design and manufacturing of low friction linear motion components and precision bearings. SAIBO products are exported to over
More informationLAP4, LAP8. Pneumatic linear drive sizes 4 and 8
Pneumatic linear drive sizes 4 and Torsional and bending resistant profiles T-slots in the outer profile enable individual mounting options Adjustable guiding system (LAP4) Precise linear roller guiding
More informationLinear drives DGC-HD, with heavy-duty guide
Linear drives DGC Key features At a glance New heavy-duty design for: Maximum loads and torques thanks to duo rail guide Long service life Ideal as a basic axis for linear gantries and cantilever axes
More informationGuide axes ELFA, without drive
Guide axes ELFA, without drive Guide axes ELFA, without drive Key features At a glance Driveless linear guide units with guide and freely movable slide The guide axis is designed to support force and torque
More informationDouble acting. Compressed filtered air with or without lubrication. Lubrication, if be used, must be continous.
Double acting Standard executions Version Symbol Type Parallel from bore 25 mm. S4 On request, they can be supplied according Directive 94/9/EC - ATEX II 2 GDc T5 Options Special versions on request Suffix
More informationM/46900/IA, M/46900/M
TWIN-LINTR Rodless Cylinders Non-magnetic and Magnetic Piston Double acting Ø 25 and 4 mm Double stroke compared with conventional cylinders Design covered by patent Maximum stroke length from minimal
More informationM/44000/M. LINTRA Rodless cylinders Magnetic piston Double acting Ø 25 to 40 mm
LINTRA Rodless cylinders Magnetic piston Double acting Ø 5 to 40 mm New compact, space-saving design Proven sealing system Integral switch mounting Adjustable cushioning Magentic piston as standard Technical
More information-V- New. Linear drives DGC Features. 2 Internet:
Linear drives DGC Features At a glance Without external guide, for simple drive functions Compact fitting length relative to stroke Fully interchangeable with the linear drive DGP Easy assembly and installation
More informationRodless cylinders. Series General. Construction characteristics. Technical characteristics. Use and maintenance
Series 1600 Rodless cylinders General The purpose of producing a rodless cylinder is to provide a space saving option over conventional cylinders. On a traditional rod type cylinder, the total space occupied
More information124
124 www.danahermotion.com Linear Units Linear Rod Units VarioLine, Movotrak Linear units with rod Perfect for hydraulics and pneumatics replacement Load up to 40 000 N High accuracy ball screw drive High
More informationRodless cylinders Rodless cylinders Series RTC. Brochure
Series RTC Brochure Bosch Rexroth AG Pneumatics Series RTC Rodless cylinder, Series RTC-BV Ø 16-80 mm; double-acting; with magnetic piston; integrated guide; Basic Version; cushioning: pneumatic, adjustable
More informationMax. particle size 5 µm. Pressure for determining piston forces. Materials:
1 Working pressure min./max. 2 bar / 8 bar Ambient temperature min./max. -10 C / +60 C Medium Compressed air Max. particle size 5 µm Oil content of compressed air 0 mg/m³ - 1 mg/m³ Pressure for determining
More informationOSPE..B Belt-Driven Actuators
OSPE..B Belt-Driven s s for Point-to-Point Applications The field-proven OSPE..B design is the industry standard for the widest array of point-to-point linear traverse applications. ompact size and maximum
More informationP1Z Series. Magnetically Coupled Rodless Air Cylinders Contents
Magnetically Coupled Rodless Air Cylinders Contents Basic Version Features... 15 Ordering Information... 151 Specifications... 152 Technical Data... 153 Dimensions... 154 Mountings... 155 uided Version
More informationLinear drives SLG, flat design
Features General information Piston 8, 12 and 18 Stroke lengths of 100 900 mm Two cushioning types selectable: Elastic cushioning Shock absorbers Direct mounting via centering holes Extremely flat design
More informationLinear drives DGC Key features
Linear drives DGC Linear drives DGC Key features General information Compact fitting length relative to stroke Loads and devices can be directly mounted on the slide Three types of cushioning available:
More informationRack and pinion axis EHMH
Features At a glance Right-angle gear unit with a reduction ratio of i = 5 High-grade bearing guide Comprehensive accessories for individual adaptation to specific requirements Use of time-tested motorcontroller
More informationORIGA SYSTEM PLUS Guides, Brakes and Valves for Modular Linear Drive Systems OSP Appendix to the Operating Instructions
ORIGA SYSTEM PLUS Guides, Brakes and Valves for Modular Linear Drive Systems OSP Appendix to the Operating Instructions TAll personnel who have anything to do with the OSP fitted with guides, brakes or
More informationMini slides SLT/SLS/SLF
Mini slides SLT/SLS/SLF Mini slides SLT/SLS/SLF Key features General information Double-acting drives Precise and rigid guide Versatile air connections Sensors can be integrated Highly flexible thanks
More informationELECTRIC ACTUATOR - RODLESS ELEKTRO SK SERIES ACTUATORS
ELECTRIC ACTUATOR - RODLESS ELEKTRO SK SERIES 1 ELECTRIC AXIS - RODLESS ELEKTRO SK SERIES Electric axis without screw piston rod, with V-Lock interface. The cylinder frame is made of anodized extruded
More informationM/146000/EX, M/146100/EX, M/146200/EX, LINTRA PLUS cylinder Magnetic & Non-magnetic piston, double acting
M/46000/X, M/4600/X, M/4600/X, LINTR PLUS cylinder > Ø 6... 80 mm > New lightweight design extrusion with universal mounting grooves > Proved and patented sealing system > Interchangeability with series
More informationRE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LM)
LM RE-CIRCULATING BALL BEARING (SERIES LM) Patented re-circulating ball bearing guide system. Several T-nut mounting options. Optional mounting accessory kits are available. Available in any length up
More informationToothed belt axes DGE
Toothed belt axes DGE Toothed belt axes DGE Key features At a glance Precision, rigid guide Highly adaptable, thanks to wide choice of mounting and attachment options Wide range of options for attaching
More informationLinear drives DGC-K. Festo core product range Covers 80% of your automation tasks
q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity qready for dispatch
More informationTRACK GUIDANCE SYSTEMS
EURO-BEARINGS LTD TRACK GUIDANCE SYSTEMS www.euro-bearings.com Tel. 01908 511733 email: sales@euro-bearings.com INTRODUCTION EURO-BEARINGS LTD www.euro-bearings.com Tel. 01908 511733 This linear guidance
More informationBimba Extruded Linear Thrusters 2X FF X EE DP 2X DD 2X Ø DD X EE DP U V W X Y Z R S Dimensions - ET T B 4X TAP AA THRU Ø BB C BORE X CC DP (OPP.SIDE)
Bimba Extruded Linear Thrusters Engineering Specifications Maximum Operating Pressure 140 psi (10 bar) Temperature Range 15 to 160 degrees F (-10 to 70 degrees C) Expected Service Life 1,500 miles (with
More information96
96 www.danahermotion.com Linear Units Linear Units with Belt Drive and Wheel Guide SpeedLine, ForceLine Velocity Noise Acceleration Maintenance Repeatability Cost Force Guide Robustness Load Torque Stiffness
More informationCompact Modules. with ball screw drive and toothed belt drive R310EN 2602 ( ) The Drive & Control Company
with ball screw drive and toothed belt drive R310EN 2602 (2007.02) The Drive & Control Company Bosch Rexroth AG Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings
More informationLinear drives DGPL Selection aid
Linear drives DGPL Linear drives DGPL Selection aid General Compact, fitting length relative to stroke Highly adaptable thanks to wide choice of mounting and attachment options Adjustable end-position
More informationMini slides SLT/SLS/SLF
Mini slides SLT/SLS/SLF Mini slides SLT/SLS/SLF Key features General information Double-acting drives Precise and rigid guide Versatile air connections Sensors can be integrated Highly flexible thanks
More informationCam roller guide LF6S complete axis
Y 1- MGE 1. Linear guides Z Mz Cam roller guide LFS complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto
More informationLinear Actuator with Toothed Belt and Integrated Roller Guide Series OSP-E..BHD
inear Actuator with Toothed Belt and Integrated Roller Guide Series OSP-E..BHD Contents Description Data Sheet No. Page Overview 1.15.001E 11-14 Technical Data 1.15.002E-1 to 3 15-17 Dimensions 1.15.002E-4
More informationFour Shaft Linear Thrusters
Four Shaft Linear Thrusters FOUR SHAFT THRUSTERS Three Models with bores from 2 to 4 Twice the load capacity of comparable two shaft units Reduced deflection and bearing play Compact, light weight robust
More informationTwo Shaft Linear Thrusters
Two Shaft Linear Thrusters TWO SHAFT THRUSTERS Seven Models with bores from 9/16 to 4 Compact, light weight robust design Smooth linear motion CYLINDER Several manufacturers to choose from Pneumatic or
More informationSpindle axes DGE Key features
Spindle axes DGE Spindle axes DGE Key features At a glance Precision, rigid guide Highly adaptable, thanks to wide choice of mounting and attachment options Wide range of options for attaching drive units
More informationFeatures and Benefits
...........................................................3-14 Features and Benefits..............................................................................3 How To Order....................................................................................4
More informationMTB 42 Belt Driven Linear Actuator
LINEAR ACTUATOR TECHNOLOGY MT Series MTB Belt Driven Linear Actuator The MT Series offers a number of profile sizes with multiple design configurations to fit almost any application. TECHNICAL DATA features
More informationV SWISS MADE LINEAR TECHNOLOGY
Compact units Excerpt from main catalogue SWISS MADE LINEAR TECHNOLOGY V 11-15 Line Tech compact units Table of contents Product overview 106 107 Design fundamentals / Lubrication / Maintenance 108 Profile
More informationMxp band cylinder. N Internal Bearing S solid bearing P profiled rail MAXIMUM DURABILITY
Mxp band cylinder N Internal Bearing S solid bearing P profiled rail MAXIMUM DURABILITY Pneumatic Actuators Electric Actuators Drives & Motors Largest selection of rodless cylinders in band, cable, and
More informationNumber of fingers 2. Max. particle size 5 µm. Pressure for determining forces
Bosch Rexroth AG Pneumatics Version Parallel Number of fingers 2 Grip tolerance 0,02 mm Lubrication gripping elements Lubricated for life 00117208 Ambient temperature min./max. +5 C / +60 C Medium Compressed
More informationRE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LP)
RE-CIRCULATING BALL BEARING (SERIES ) Patented re-circulating ball bearing guide system. Several T-nut mounting options. Optional mounting accessory kits are available. More than one carrier per rail can
More informationLintra Rodless Cylinder Series 46000B, 46100B, and 46200B
Section 10 Lintra Rodless Cylinder Series 46000B, 46100B, and 46200B Proven Applications...ACT-10-2 Features...ACT-10-4 Specifications...ACT-10-5 Series 46000B Internally Guided Carriage...ACT-10-6 Series
More informationCKR Compact Modules with Ball Rail Guides and Toothed Belt Drive. The Drive and Control Company
CKR Compact Modules with Ball Rail Guides and Toothed Belt Drive The Drive and Control Company Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE 8 615 (03.006) Rexroth Linear Motion Technology
More informationLinear Actuator with Ball Screw and Extending Rod Series OSP-E..SBR. Contents Description Overview Technical Data Dimensions 110
Linear Actuator with Ball Screw and xtending Rod Series OSP-..SBR Contents Description Page Overview 103-106 Technical Data 107-109 Dimensions 110 103 The System Concept LCTRIC LINAR ACTUATOR FOR PRCIS
More information