124
|
|
- Christine Lynch
- 5 years ago
- Views:
Transcription
1 124
2 Linear Units Linear Rod Units VarioLine, Movotrak Linear units with rod Perfect for hydraulics and pneumatics replacement Load up to N High accuracy ball screw drive High repeatability Speed up to 2 m/s Stroke up to 2000 mm Ball or slide guided models Models with IP65 sealing Large range of accessories Typical Applications Typical applications are where hydraulic and pneumatic cylinders needs to be replaced by an electrical solution or where a rod type unit is prefered. These units are also suited to harsh environments. Typical examples are valve control, machines in the plastic industry and as a Z-axis in various types of machines
3 VarioLine WZ Features Can be installed in all directions Ball screw drive Ball guides Compact WZ60 WZ60 WZ80 Profile size (width height) [mm] Stroke length (S max), maximum [mm] Linear speed, maximum [m/s] 1,5 1,5 Dynamic carriage load (Fx), maximum [N] Remarks Page
4 Linear Units Movotrak T T90 Features Can be installed in all directions Ball screw drive Slide guides Load up to N IP65 protection class Wash down protected versions available T90 T130 Profile size (width height) [mm] Stroke length (S max), maximum [mm] Linear speed, maximum [m/s] 2,0 2,0 Dynamic carriage load (Fx), maximum [N] Remarks mounting accessories according to hydraulic cylinder standards available mounting accessories according to hydraulic cylinder standards available Page
5 WZ60 Ball Screw Drive, Ball Guide» Ordering key - see page 218» Accessories - see page 137» Additional data - see page 195 General Specifications Rod Idle Torque (M idle) [Nm] WZ60 Profile size (w h) [mm] Input speed [rpm] Screw lead [mm] p = 5 p = 20 p = 50 Type of screw Lubrication Included accessories single nut ball screw central lubrication of all parts that require lubrication 4 mounting clamps 150 0,7 1,0 1, ,1 1,6 2, ,5 1,8 2,2 M idle = the input torque needed to move the rod with no load on it. Performance Specifications Definition of Forces WZ60 Stroke length (S max), maximum [mm] 400 Linear speed, maximum [m/s] 1,5 Acceleration, maximum [m/s 2 ] 20 Repeatability [± mm] 0,02 Input speed, maximum [rpm] 3000 Operation temperature limits [ C] 0 80 Dynamic load (Fx), maximum [N] Dynamic load (Fy), maximum [N] Dynamic load (Fz), maximum [N] Dynamic load torque (Mx), maximum [Nm] 50 1 Drive shaft force (Frd), maximum [N] 500 Drive shaft torque (Mta), maximum [Nm] 30 Ball screw diameter (d0) [mm] 20 Ball screw lead (p) [mm] 5, 20, 50 Weight of unit with zero stroke of every 100 mm of stroke of the rod with zero stroke of every 100 mm of rod 1 Value for the complete unit 2 See diagram Maximum Rod Side Forces (Fy, Fz) [kg] 4,5 0,77 1,8 0,
6 Linear Units WZ60 Ball Screw Drive, Ball Guide A1: depth 13 A2: locking plug for lubricating nipple A3: socket cap screw ISO4762-M A4: tapered lubricating nipple to DIN71412 AM6 as standard feature Maximum Rod Side Forces (Fy, Fz) Deflection (f) of Rod due to Fy and Fz Torsion (j) of Rod due to Mx 1: Load = 2000 N 2: Load = 1500 N 3: Load = 1000 N 4: Load = 500 N 5: Load = 250 N 6: Load = 125 N 129
7 WZ80 Ball Screw Drive, Ball Guide» Ordering key - see page 218» Accessories - see page 137» Additional data - see page 195 General Specifications Rod Idle Torque (M idle) [Nm] WZ80 Profile size (w h) [mm] Input speed [rpm] Screw lead [mm] p = 5 p = 10 p = 20 p = 50 Type of screw Lubrication Included accessories single nut ball screw central lubrication of all parts that require lubrication 4 mounting clamps 150 0,6 1,1 1,3 1, ,1 1,5 1,6 2, ,4 1,8 1,8 2,7 M idle = the input torque needed to move the rod with no load on it. Performance Specifications Definition of Forces WZ80 Stroke length (S max), maximum [mm] 500 Linear speed, maximum [m/s] 1,5 Acceleration, maximum [m/s 2 ] 20 Repeatability [± mm] 0,02 Input speed, maximum [rpm] 3000 Operation temperature limits [ C] 0 80 Dynamic load (Fx), maximum [N] Dynamic load (Fy), maximum [N] Dynamic load (Fz), maximum [N] Dynamic load torque (Mx), maximum [Nm] Drive shaft force (Frd), maximum [N] 700 Drive shaft torque (Mta), maximum [Nm] 55 Ball screw diameter (d0) [mm] 25 Ball screw lead (p) [mm] 5, 10, 20, 50 Weight of unit with zero stroke of every 100 mm of stroke of the rod with zero stroke of every 100 mm of rod 1 Value for the complete unit 2 See diagram Maximum Rod Side Forces (Fy, Fz) [kg] 7,5 1,35 3,0 0,
8 Linear Units WZ80 Ball Screw Drive, Ball Guide A1: depth 13 A2: locking plug for lubricating nipple A3: socket cap screw ISO4762-M A4: tapered lubricating nipple to DIN71412 AM6 as standard feature Maximum Rod Side Forces (Fy, Fz) Deflection (f) of Rod due to Fy and Fz Torsion (j) of Rod due to Mx 1: Load = 3000 N 2: Load = 2500 N 3: Load = 2000 N 4: Load = 1500 N 5: Load = 1000 N 6: Load = 500 N 7: Load = 250 N 8: Load = 125 N 131
9 T90 Ball Screw Drive, Slide Guide» Ordering key - see page 218» Accessories - see page 137» Additional data - see page 195 General Specifications Rod Idle Torque (M idle) [Nm] T90 Profile size (w h) [mm] Input speed [rpm] Screw lead [mm] p = 5 p = 10 p = 20 p = 25 p = 32 Type of screw Protection class ball screw with single nut IP ,5 1,5 3,0 2,0 3,5 M idle = the input torque needed to move the rod with no load on it. Lubrication One point lubrication of ballscrew Included accessories Definition of Forces Performance Specifications T90 Stroke length (S max), maximum [mm] 1500 Linear speed, maximum [m/s] 2,0 Acceleration, maximum [m/s 2 ] 8 Repeatability [± mm] 0,05 Input speed, maximum screw diameter/lead 25/05 mm screw diameter/lead 25/10, 25/25 mm screw diameter/lead 32/20, 32/32 mm [rpm] Operation temperature limits [ C] Dynamic load (Fx), maximum screw diameter 25 mm screw diameter 32 mm Dynamic load (Fy), maximum screw diameter 25 mm screw diameter 32 mm Dynamic load (Fz), maximum screw diameter 25 mm screw diameter 32 mm [N] [N] [N] Dynamic load torque (Mz, My), maximum [Nm] Drive shaft force (Frd), maximum screw diameter 25 mm screw diameter 32 mm [N] Performance Specifications T90 Screw versions, diameter (d0) / lead (p) [mm] 25/05, 25/10, 25/25 32/20, 32/32 Weight of units with screw diameter 25 mm of unit with zero stroke of every 100 mm of stroke of the rod with zero stroke of every 100 mm of rod Weight of units with screw diameter 32 mm of unit with zero stroke of every 100 mm of stroke of the rod with zero stroke of every 100 mm of rod [kg] [kg] 8,16 1,62 0,52 0,60 10,64 1,80 0,55 0,60 Drive shaft torque (Mta), maximum screw diameter 25 mm screw diameter 32 mm 1 Value for the complete unit [Nm]
10 Linear Units T90 Ball Screw Drive, Slide Guide T09-B25 screw ø25 mm A1: depth 18 A2: depth 33 A3: outside thread A4: inside thread A5: T-slot T09-B32 screw ø32 mm A1: depth 18 A2: depth 43 A3: outside thread A4: inside thread A5: T-slot 133
11 T130 Ball Screw Drive, Slide Guide» Ordering key - see page 218» Accessories - see page 137» Additional data - see page 195 General Specifications Rod Idle Torque (M idle) [Nm] T130 Profile size (w h) [mm] Input speed [rpm] Screw lead [mm] p = 10 p = 20 p = 40 Type of screw Protection class ball screw with single nut IP ,5 4,5 5,5 M idle = the input torque needed to move the rod with no load on it. Lubrication One point lubrication of ballscrew Included accessories Definition of Forces Performance Specifications T130 Stroke length (S max), maximum [mm] 2000 Linear speed, maximum [m/s] 2,0 Acceleration, maximum [m/s 2 ] 8 Repeatability [± mm] 0,05 Input speed, maximum screw lead 10 mm screw lead 20, 40 mm [rpm] Operation temperature limits [ C] Dynamic load (Fx), maximum screw lead 10 mm screw lead 20 mm screw lead 40 mm [N] Dynamic load (Fy), maximum [N] Dynamic load (Fz), maximum [N] Dynamic load torque (My, Mz), maximum [Nm] Drive shaft force (Frd), maximum [N] 3000 Drive shaft torque (Mta), maximum [Nm] 140 Ball screw diameter (p) [mm] 40 Ball screw leads (d0) [mm] 10, 20, 40 Weight of unit with zero stroke of every 100 mm of stroke of the rod with zero stroke of every 100 mm of rod 1 Value for the complete unit [kg] 18,50 3,00 1,25 0,
12 Linear Units T130 Ball Screw Drive, Slide Guide A1: depth 28 A2: depth 20 A3: outside thread A4: inside thread A5: T-slot 135
110
110 www.danahermotion.com Linear Units Linear Lifting Units SpeedLine, Movo Z Developed for lifting applications Telescopic models available Models with ball screw or belt drive Load up to 750 kg High
More informationLinear Units with Belt Drive and Slide Guide
84 www.danahermotion.com Linear Units Linear Units with Belt Drive and Slide Guide Movopart Velocity Noise Acceleration Maintenance Repeatability Cost Force Guide Robustness Load Torque Stiffness Typical
More information96
96 www.danahermotion.com Linear Units Linear Units with Belt Drive and Wheel Guide SpeedLine, ForceLine Velocity Noise Acceleration Maintenance Repeatability Cost Force Guide Robustness Load Torque Stiffness
More informationLinear Motion. Optimized.
Thomson - Linear Motion. Optimized. Linear Motion. Optimized. Often the ideal design solution is not about finding the fastest, sturdiest, most accurate or even the least expensive option. Rather, the
More informationLinear Motion Systems
Linear Motion Systems Thomson - the Choice for Optimized Motion Solutions Often the ideal design solution is not about finding the fastest, sturdiest, most accurate or even the least expensive option.
More informationLinear Motion Systems Toll Free Phone: Toll Free Fax:
Linear Motion Systems Thomson - the Choice for Optimized Motion Solutions Often the ideal design solution is not about finding the fastest, sturdiest, most accurate or even the least expensive option.
More informationLinear Motion Systems
Linear Motion Systems www.thomsonlinear.com Thomson - the Choice for Optimized Motion Solutions Often the ideal design solution is not about finding the fastest, sturdiest, most accurate or even the least
More informationPrecision Linear Actuators
www.thomsonlinear.com Precision Linear Actuators Thomson the Choice for Optimized Motion Solutions Often the ideal design solution is not about finding the fastest, sturdiest, most accurate or even the
More informationLAP4, LAP8. Pneumatic linear drive sizes 4 and 8
Pneumatic linear drive sizes 4 and Torsional and bending resistant profiles T-slots in the outer profile enable individual mounting options Adjustable guiding system (LAP4) Precise linear roller guiding
More informationLinear Motion Systems with Belt Drive and Ball Guide
Linear Motion Systems with Belt Drive and Ball Guide Overview SpeedLine WH WH40 Features Can be installed in any orientation Stroke up to 2 m Acceleration up to 40 m/s 2 Compact Parameter WH40 Profile
More informationRoller guide actuators - SQ ZST
Roller guide actuators - SQ ZST Rack and pinion with fixed carriage, also for larger travels up to 30 m RK Standard motor 9Choice 9 of motor and motor adaptor plate to suit your requirements 9 9Simple
More informationBall rail actuator/guide - RK DuoLine Z/R
Ball rail actuator/guide - RK DuoLine Z/R All-round talent with protected guide system Fixing slots in the guide profile and carriage 9Simple 9 connection of accessories 9Excellent 9 fixing options for
More informationBetter. Faster. Smarter.
Better. Faster. Smarter. Thomson has the products and know-how to help you design equipment that is better, faster, smarter. In a modern production environment, moving material quickly, accurately and
More informationCatalogue. Portal Axes PAS
Catalogue Portal xes PS Portal xes PS Table of Content Product Description............................... 2 Ballscrew axes.................................... Product description.............................
More informationPC-Series Precision Linear Actuators. Optimize Your Machine and Save Energy With Reliable, High Performance, Compact Actuators
PC-Series Precision Linear Actuators Optimize Your Machine and Save Energy With Reliable, High Performance, Compact Actuators Make the Change to Electric Enjoy superior performance and save time and energy
More informationLM-P608 Portal Axis. Features. Versions
The LM-P608 portal axis is the universally suitable axis from our linear axis program. With a profile cross section of 80 x 80mm and a permissible load of up to 60 kg it meets the demands of the applications
More informationMTB 42 Belt Driven Linear Actuator
LINEAR ACTUATOR TECHNOLOGY MT Series MTB Belt Driven Linear Actuator The MT Series offers a number of profile sizes with multiple design configurations to fit almost any application. TECHNICAL DATA features
More informationPrecision Linear Actuators
Precision Linear Actuators Linear Motion. Optimized. T Series Introduction The proven design of the T series precision linear actuators has found its way into thousands of applications throughout the world.
More informationRoller guide actuator/guides - SQ /SQZ
Roller guide actuator/guides - SQ /SQZ Timing-belt unit with optimum connecting options due to slots in guide profile/carriage Fixing slots 9Easy 9 fixing of linear actuator 9Simple 9 connection of accessories
More informationModel 6A Series 6-Axis Load Cells (Fx Fy Fz Mx My Mz)
6AXX 10-20 - 17 Model 6A Series 6-Axis Load Cells (Fx Fy Fz Mx My Mz) Interface s 6-axis load cell measures forces simultaneously in three mutually perpendicular axes and three simultaneous torques about
More informationProfile guide/actuator - RK Compact
Profile guide/actuator - RK Compact Slimline short-stroke linear actuator for hand adjustment with excellent price-performance ratio Control knob with vernier Simple adjustment of carriage Backlash of
More informationMT Series MTB 42 BELT DRIVEN LINEAR ACTUATOR
MT Series MTB BELT DRIVEN LINEAR ACTUATOR LINEAR ACTUATOR TECHNOLOGY The MT Series offers a number of profile sizes with multiple design configurations to fit almost any application. TECHNICAL DATA FEATURES
More informationWIESEL POWERLine and WIESEL DYNALine with ball screw drive Innovative solutions, down to the very last detail.
WIESEL POWERLine and WIESEL DYNALine with ball screw drive Innovative solutions, down to the very last detail. WIESEL POWERLine WM40 The linear drive unit for miniaturized applications. High performance
More informationRODLESS MECHANICAL CYLINDERS
RODLESS MECHANICAL CYLINDERS RODLESS MECHANICAL CYLINDRES WITH BALL-SCREW DRIVE, CMH CMH: A rodless cylinder whose carriage is positioned by the movement of nuts attached to a baliscrew. Each carriage
More informationActuator Units NEW All-in-one-solution
Actuator Units NEW All-in-one-solution Axis Servo Motor Amplifier Actuator Units Economy Series ES4 p. 06-07 ES6 p. 08-09 EC3 p. 10-11 EC4 p. 12-13 LM Guide Actuator KR26 p. 16-17 KR33 p. 18-19 Linear
More informationNews on a classic: Mechanical linear drive unit WIESEL BASELine
News on a classic: Mechanical linear drive unit WIESEL BASELine www.danahermotion.com As of September 2004 WIESEL BASELine A classic is rediscovered. The new mechanical linear drive units. WB40 WB60 A
More informationMax. particle size 5 µm. Pressure for determining piston forces. Materials:
Rodless cylinders Rodless cylinder 1 Working pressure min./max. 2 bar / 8 bar Ambient temperature min./max. -10 C / +60 C Medium Compressed air Max. particle size 5 µm Oil content of compressed air 0 mg/m³
More informationAutomation Components
www.linearactuators.com Automation Components M o v o Z M o v o p a r t A c c u s l i d e S u p e r s l i d e M i c r o s t a g e P r e c i s i o n A c t u a t o r s GB. 1 0 1 2 3 4 5 6 7 8 9 10 11 12
More informationRE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LP)
RE-CIRCULATING BALL BEARING (SERIES ) Patented re-circulating ball bearing guide system. Several T-nut mounting options. Optional mounting accessory kits are available. More than one carrier per rail can
More informationLinear Units with Belt Drive and Wheel Guide
Linear Units with Belt Drive and Wheel Guide Overview SpeedLine WH WH80 Features Can be installed in any orientation Speed up to 11 m/s Acceleration up to 40 m/s 2 Stroke up to 11 m Parameter WH50 WH80
More informationRE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LM)
LM RE-CIRCULATING BALL BEARING (SERIES LM) Patented re-circulating ball bearing guide system. Several T-nut mounting options. Optional mounting accessory kits are available. Available in any length up
More informationLinear Drive with Toothed Belt and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Series OSP-E..BHD
Linear Drive with and Integrated Guide with Recirculating Ball Bearing Guide with Roller Guide Contents Description Page Overview 11-14 Version with Recirculating Ball Bearing Guide Technical Data 15-17
More informationLinear Drive with Ball Screw Drive Series OSP-E..SB
Linear Drive with Ball Screw Drive Series OSP-E..SB Contents Description Data Sheet No. Page Overview 1.30.001E 47-50 Technical Data 1.30.002E-1 to 5 51-55 Dimensions 1.30.002E-6, -7 56-57 Order instructions
More informationProduct Description. Characteristic features R310A 2402 ( ) Linear Modules MLR
9 Bosch Rexroth Corporation R310A 40 (1.11) MLR Product Description Characteristic features MLR...: with Cam Roller Guide and Toothed Belt Drive for high-speed applications (up to 10 m/s) with Cam Roller
More informationELECTRIC ACTUATOR - RODLESS ELEKTRO SK SERIES ACTUATORS
ELECTRIC ACTUATOR - RODLESS ELEKTRO SK SERIES 1 ELECTRIC AXIS - RODLESS ELEKTRO SK SERIES Electric axis without screw piston rod, with V-Lock interface. The cylinder frame is made of anodized extruded
More informationLinear drives DGC Key features
Linear drives DGC Linear drives DGC Key features General information Compact fitting length relative to stroke Loads and devices can be directly mounted on the slide Three types of cushioning available:
More informationThe new performance class...
The new performance class... 10/2017 EP(X)-II 30/40 EP(X)-II 30/40 twin tube actuator The latest generation of twin tube units Move-Tec EP(X)-II 30/40 Your application takes centre stage slow langsam A
More informationV SWISS MADE LINEAR TECHNOLOGY
Compact units Excerpt from main catalogue SWISS MADE LINEAR TECHNOLOGY V 11-15 Line Tech compact units Table of contents Product overview 106 107 Design fundamentals / Lubrication / Maintenance 108 Profile
More informationTRACK GUIDANCE SYSTEMS
EURO-BEARINGS LTD TRACK GUIDANCE SYSTEMS www.euro-bearings.com Tel. 01908 511733 email: sales@euro-bearings.com INTRODUCTION EURO-BEARINGS LTD www.euro-bearings.com Tel. 01908 511733 This linear guidance
More informationSERIES RTC RODLESS CYLINDERS PNEUMATIC SHUTTLE TYPE
SERIES RTC RODLESS CYLINDERS PNEUMATIC SHUTTLE TYPE Series RTC Rodless Cylinder Pneumatic automation building block Series RTC (Rodless Thrust Cylinder)-High performance shuttle type rodless cylinders
More informationPrecision Modules PSK
Precision Modules PSK 2 Bosch Rexroth AG Precision Modules PSK R999000500 (2015-12) Identification system for short product names Short product name Example:: P S K - 050 - N N - 1 System = Precision Module
More informationCOMPACT UNIVERSAL SLIDES
COMPACT UNIVERSAL SLIDES English edition 168 COMPACT UNIVERSAL SLIDES KUS CONTENTS PRODUCT DESCRIPTION 170 172 COMPACT UNIVERSAL SLIDES 173 CALCULATION PRINCIPLES/ ASSEMBLY INSTRUCTIONS 17 176 Lx Mz Kx
More informationM/46800/M, M/46800/HM, M/46800/PM
External guides for heavy loads over long distances Rigid, reinforced aluminium profile provides greater load support T-slots in the outer profile enable individual mounting options Precision guidance
More informationPassive guide axes DGC-FA, without drive
Key features At a glance Driveless linear guide units with guide and freely movable slide The passive guide axis is designed to support force and torque capacity in multi-axis applications Higher torsional
More informationELECTRIC AXIS ELEKTRO SVAK SERIES ACTUATORS
ELECTRIC AXIS ELEKTRO SVAK SERIES 1 ELECTRIC AXIS ELEKTRO SVAK SERIES This belt-driven rodless electric actuator is characterised by the fact that the motor and reducer unit is integral with the carriage,
More informationORIGA Pneumatic Linear Drives OSP-L
ORIGA Pneumatic Linear Drives OSP-L Very long lifetime and lowest leakage A NEW Modular Linear Drive System With this second generation linear drive Parker Origa offers design engineers complete flexibility.
More informationRE-CIRCULATING BALL BEARING LINEAR GUIDES (SERIES LL)
LL RE-CIRCULATING BALL BEARING (SERIES LL) Patented re-circulating ball bearing guide system. Excellent price / performance ratio. Several T-nut mounting options. Optional mounting accessory kits are available.
More informationLinear drives SLG, flat design
Features General information Piston 8, 12 and 18 Stroke lengths of 100 900 mm Two cushioning types selectable: Elastic cushioning Shock absorbers Direct mounting via centering holes Extremely flat design
More informationhighlights Double tube linear actuators
highlights GN 491 with right or left hand thread, single slider 3 Type R1 Right hand thread, single shaft end R2* Right hand thread, two shaft ends L1* Left hand thread, single shaft end L2* Left hand
More informationVertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV
Vertical Linear Drive with and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Overview...25-28 Technical Data...29-31 Dimensions...32-33 25 Features TOOTHED BELT DRIVE FOR VERTICAL MOVEMENTS
More informationMovopart M50. Installation and Service Manual Edition: 2 DW110242gb-0446
Movopart M50 GB Installation and Service Manual Edition: 2 DW110242gb-0446 1. Installation 1.1 Mounting of the unit OK 1.2 Maximum distance between mounting points Fz Fz [N] 350 300 Deflection too high
More informationLINEAR UNITS CT & MT
LINEAR UNITS CT & MT Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right
More informationMax. particle size 5 µm. Pressure for determining piston forces. Materials:
1 Working pressure min./max. 2 bar / 8 bar Ambient temperature min./max. -10 C / +60 C Medium Compressed air Max. particle size 5 µm Oil content of compressed air 0 mg/m³ - 1 mg/m³ Pressure for determining
More informationAny reproduction, even partial, is allowed only by written permission by Rollco.
LINEAR UNIT E-SMART Every care has been taken to ensure the accuracy of the information contained in this catalogue, but no liability can be accepted for any errors or omissions. We reserve the right to
More informationInnovation & Excellence. Index. Index. Innovation & Excellence. Introduction. Our Solutions 4-5. MLE / MLZ Series iron core motor
Index Innovation & Excellence Introduction 3 Our Solutions 4-5 MLE / MLZ Series iron core motor 6-7 MLE 2 Linear Units 8-9 MLE 3 Linear Units 10-11 Index MLE 5 Linear Units MLE 7 Linear Units MLZ 2 Linear
More informationVertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV
Vertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Contents Description Page Overview 25-28 Technical Data 29-33 Dimensions 34 Order Instructions 35
More informationWIESEL SPEEDLine WHZ80 with roller guideway and AT toothed belt
WIESEL WHZ80 with roller guideway and AT toothed belt All figures shown in millimeters. Note: Mounted wipers on request. The use of a long power bridge increases the total length. Technical data Linear
More informationVertical Linear Drive with Toothed Belt and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV
Vertical Linear Drive with and Integrated Recirculating Ball Bearing Guide Series OSP-E..BV Contents Description Page Overview 25-28 Technical Data 29-31 Dimensions 32-33 25 Parker Hannifin Corporation
More informationLinear Guides Series OSP-E
Linear Guides Series OSP-E NEW Contents Description Data Sheet No. Page Overview 1.40.020E 101-102 Plain Bearing SLIDELINE 1.40.021E 103-104 Roller Guide POWERSLIDE 1.40.022E 105-108 Aluminium Roller Guide
More informationБерг АБ Тел. (495) , факс (495)
AUTOMATION Linear- and Rotary Modules Table of Contents 1 Product Overview............................................. 4 1.1 Selection of the Linear Modules................................. 8 1.2 Selection
More informationToothed belt axes DGE
Toothed belt axes DGE Toothed belt axes DGE Key features At a glance Precision, rigid guide Highly adaptable, thanks to wide choice of mounting and attachment options Wide range of options for attaching
More informationCam roller guide LF6S complete axis
Y 1- MGE 1. Linear guides Z Mz Cam roller guide LFS complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto
More informationNumber of fingers 2. Max. particle size 5 µm. Pressure for determining forces
Bosch Rexroth AG Pneumatics Version Parallel Number of fingers 2 Grip tolerance 0,02 mm Lubrication gripping elements Lubricated for life 00117208 Ambient temperature min./max. +5 C / +60 C Medium Compressed
More informationLinear Drive with Toothed Belt Series OSP-E..B. Contents Description Overview Technical Data Dimensions Order Instructions 46
Linear Drive with Toothed Belt Contents Description Page Overview 35-38 Technical Data 39-43 Dimensions 44-45 Order Instructions 46 35 The System Concept ELECTRIC LINEAR DRIVE FOR POINT-TO-POINT APPLICATIONS
More informationLinear Guides Series OSP-E
Linear Guides Series OSP-E NEW Contents Description Page Overview 101-102 Plain Bearing SLIDELINE 103-104 Roller Guide POWERSLIDE 105-108 Aluminium Roller Guide PROLINE 109-111 Heavy-duty guide HD 113-115
More informationCKR Compact Modules with Ball Rail Guides and Toothed Belt Drive. The Drive and Control Company
CKR Compact Modules with Ball Rail Guides and Toothed Belt Drive The Drive and Control Company Bosch Rexroth Corp. Linear Motion and Assembly Technologies CKR RE 8 615 (03.006) Rexroth Linear Motion Technology
More informationGuide axes ELFA, without drive
Guide axes ELFA, without drive Guide axes ELFA, without drive Key features At a glance Driveless linear guide units with guide and freely movable slide The guide axis is designed to support force and torque
More informationLM SERIES LINEAR MODULE
LM SERIES LINEAR MODULE THE LM RODLESS LINEAR ACTUATOR RACO s LM Linear Modules are lightweight positioning elements, which can be easily configured into a wide variety of multiple axis motion systems.
More informationA5 BELT-DRIVEN RODLESS ELECTRIC AXIS, SERIES ELEKTRO BK
BELT-DRIVEN RODLESS ELECTRIC AXIS, SERIES ELEKTRO BK Belt-driven rodless electric axis with a V-Lock interface. The structure features an extremely lightweight yet high-strength anodised aluminium extruded
More informationLINEAR ACTUATORS. hepcomotion.com
LINEAR ACTUATORS hepcomotion.com PDU2 Belt Driven DLS Belt Driven 3 4 SBD Belt Driven A SDM Ball Screw HDCS Heavy Duty Ball Screw 8 9 LINEAR ACTUATORS ctuator HDLS Heavy Duty Belt Driven PSD Ball Screw
More informationSizes 50, 65, 80. Presence of internal channels for re-lubrication Large range of axis mounting accessories
> Series 5E electromechanical axis C_Electrics > 207 Series 5E electromechanical axis New models Sizes 50, 65, 80 Multiposition system with transmission of the movement with toothed belt Suitable for high
More informationCourtesy of CMA/Flodyne/Hydradyne Motion Control Hydraulic Pneumatic Electrical Mechanical (800)
01_1 Miniature st Headline_36 Ball Rail pt/14.4 Systems mm second line 2 Linear Motion and Assembly Technologies Miniature Ball Rail Systems Ball Rail Systems Roller Rail Systems Linear Bushings and Shafts
More informationLinear guides MGE 13.2 Linear guides
13-2 MGE 13.2 Linear guides Linear guides For constructing linear guides based on cam roller guides Cam roller guides are suitable for applications with high speeds and medium loads, in particular for
More informationMini slides SLTE, electric
Key features Range of applications Special features The electric mini slide SLTE is ideal for use in automation applications where controlled end-position cushioning (gentle stopping), constant travel
More informationA44000, LINTRA-LITE Rodless Cylinders Non-magnetic and Magnetic Piston, double acting
> > Ø 25... 40 mm > > New compact, spacesaving design > > Proven sealing system > > Integral switch mounting > > uffer or adjustable cushioning > > Standard foot mountings Technical features Medium: Compressed
More informationCam roller guide LF12S complete axis
Y -16 MGE. Linear guides Z Mz Cam roller guide LF1S complete axis X Mx M y [mm] B [mm] Fully assembled cam roller guide Stroke and trolley length can be individually selected Rail profile screwed onto
More informationACTUATORLINE ELM series
ACTUATORLINE ELM series www.rolloncorp.com www.motiontech.com.au Contents Series Overview 1 The Components 2 The Linear Motion System 3 Main Technical Characteristics 4 ELM 50 SP 6 ELM 65 SP 7 ELM 80 SP
More informationML Series MINIATURE SCREW-DRIVEN LINEAR ACTUATOR LOW COST SOLUTION FOR PRECISION POSITIONING IN COMPACT SPACES!
ML Series MINIATURE SCREW-DRIVEN LINEAR ACTUATOR Compact and easy to install, a low cost linear solution perfectly suited for the medical industry, life science and small scale automation applications.
More informationPAGE 6 PAGE 11 PAGE 17 PAGE 23. Product groups. Light weight overhead rail system - Movorail. High speed overhead rodless actuators - Tollobelt
Handling Components Product groups Light weight overhead rail system - Movorail Low weight means easy to handle and install Five basic sizes Can handle loads up to 600 kg Anodised aluminium profiles Quick
More informationSNR, YOUR GUIDE TO LINEAR MODULES
SNR, YOUR GUIDE TO LINEAR MODULES A bearing manufacturer known across the world For almost a century NTN-SNR has been focusing on the development, design and manufacture of bearings. Today NTN-SNR has
More informationMini slides SLT/SLS/SLF
Mini slides SLT/SLS/SLF Mini slides SLT/SLS/SLF Key features General information Double-acting drives Precise and rigid guide Versatile air connections Sensors can be integrated Highly flexible thanks
More information1. Product overview Basic-Line-Module AXN Product description Basic-Line-Module AXN 4-5. Guide system Roller guide 6 Drive system Gear belt 7
Directory Page 1. Product overview Basic-Line-Module AXN 3 2. Product description Basic-Line-Module AXN 4-5 Guide system Roller guide 6 Drive system Gear belt 7 3. Basic-Line-Modul AXN 45-Z 8-9 AXN 65-Z
More informationLexium Linear Motion
Linear axes and multi-axis systems Catalogue April 2011 All technical information about products listed in this catalogue are now available on: www.schneider-electric.com Browse the product data sheet
More informationMiniature Linear Modules MKK/MKR The Drive & Control Company
Miniature Linear Modules MKK/MKR 12-40 The Drive & Control Company 2 Miniature Linear Modules R310A 2418 (2009.05) Linear Motion and Assembly Technologies Ball Rail Systems Roller Rail Systems Linear Bushings
More informationMini slides EGSL, electric
Key features At a glance Electric slide series Maximum performance in compact space: Precision Load capacity Dynamic response Choice of homing: To fixed stop To reference switch Perfect for vertical applications
More informationPrecision Modules PSK
Precision Modules PSK The Drive & Control Company Rexroth Linear Motion Technology Ball Rail Systems Roller Rail Systems Standard Ball Rail Systems Super Ball Rail Systems Ball Rail Systems with Aluminum
More informationProfile guide/actuator - PLM
Profile guide/actuator - PLM The small range for positioning small loads Control knob with vernier 9Simple 9 adjustment of carriage Screw cover 9Protection 9 of drive screw against contamination Connecting
More informationPNEUMATIC SLIDES (SERIES ZA)
ZA PNEUMATIC SLIDES (SERIES ZA) Bore 2x6, 2x8, 2x12, 2x16 or 2x20 mm. Stroke from 10 mm to 150mm. Optional end of stroke adjustments using shock absorbers, rubber bumpers, (FGD) or grub screw, (FPD). Optional
More informationLinear drives DGC-HD, with heavy-duty guide
Linear drives DGC Key features At a glance New heavy-duty design for: Maximum loads and torques thanks to duo rail guide Long service life Ideal as a basic axis for linear gantries and cantilever axes
More informationACTUATORS POSITION SENSOR
POSITION SENSOR 1 2 SUMMARY P INTRODUCTION PAGE 4 P LTS POSITION SENSOR PAGE 5 P LTL POSITION SENSOR PAGE 9 SUMMARY P LTE POSITION SENSOR PAGE 12 3 INTRODUCTION INTRODUCTION Magnetic position sensors are
More informationndustr SNR our guide to linear modules
ndustr SNR our guide to linear modules SNR A bearing manufacturer known across the world For almost a century SNR has been focusing on the development, design and manufacture of bearings. Today SNR has
More informationPrecision Linear Actuators. Precision Linear Actuators.
Precision Linear Actuators Precision Linear Actuators Danaher Motion - Helping you build a better machine, faster Danaher Corporation combined over 30 industry-leading brands such as Kollmorgen, Thomson,
More informationSizes 50, 65, 80. Accessories for cables fixing. Presence of internal channels for re-lubrication Large range of axis mounting accessories
> Series 5E electromechanical axis C_Electrics > 206 Series 5E electromechanical axis New Sizes 50, 65, 80 Multiposition system with transmission of the movement with toothed belt Suitable for high dynamics
More informationLINEAR TABLES
LINEAR TABLES LINEAR TABLES NIASA'S LINEAR TABLES are translating units that can be easily controlled manually or commanded by CNC. Due to their lightness and ease of application they are very useful elements
More informationPC Series Precision Linear Actuators
PC Series Precision Linear Actuators Optimized Machine Design and Energy Savings Through Reliable, High-Performance and Compact Electric Actuation Unmatched Power Density, Speed and Stroke Length Thomson
More informationLinear Guides Series OSP-P
Linear Guides Series OSP-P NEW Contents Description Page Overview 31-32 Plain bearing guide SLIDELINE 33-34 Roller guide POWERSLIDE 35-38 Aluminium roller guide PROLINE 39-40 Recirculating ball bearing
More informationLinear drives DGC. Festo core product range Covers 80% of your automation tasks
Linear drives DGC q/w Worldwide: Superb: Easy: Festo core product range Covers 80% of your automation tasks Always in stock Festo quality at an attractive price Reduces procurement and storing complexity
More informationOSPE..BHD Belt-Driven Actuators
OSPE..BHD Belt-Driven Actuators Actuators for High-Speed, Long Travel, Heavy Duty Applications The OSPE..BHD is the highest capacity belt-driven actuator in the OSPE family. The integrated ball bearing
More informationAutomated Format Adjustment
Automated Format Adjustment reliable and precise in cooperation with 03/2016 Automated Format Adjustment RK Rose+Krieger and LENORD+BAUER benefit from the synergies that arise from the sensible combination
More informationaluminum guide carriage cover with wiper and grease nipple roller hardened steel rail Example: PS 25/35 width of guide rail (35 mm)
Technical Data Versions for pneumatic linear drive: Series OSP-P aluminum guide carriage Roller Guide Powerslide Loads, Forces and Moments aluminum clamping rail hardened steel rail roller cover with wiper
More information