Section L Accessories

Transcription

1 Section L Tabe of Contents QuickJet and UniJet Spray Nozze Systems/Components QuickJet Spray Nozze Systems...L2 UniJet Spray Nozze Systems L2 Standard QuickJet Bodies...L3 ProMax QuickJet Bodies...L3 QuickJet Adjustabe Ba Fitting Bodies.. L3 QuickJet Spit-Eyeet Bodies...L3 Kynar QuickJet Bodies...L3 QuickJet and ProMax Nozze System Pugs L3 UniJet Nozze System Adapter for QuickJet Systems... L3 Standard UniJet Nozze Bodies L6 UniJet Spit-Eyeet Bodies L6 UniJet Pug Vave Nozze Bodies L6 UniJet Roover Nozze Bodies L6 UniJet Ba Vave Nozze Bodies...L6 UniJet Diaphragm Check Vave Nozze Bodies L7 Quick UniJet Nozze Assembies L8 UniJet Strainers...L9 UniJet Fiters, Vaves and Stabiizers... L10 UniJet Adapters...L11 Quick UniJet Adapters and Caps L12 Spit-Eyeet Connectors L14 Adjustabe Ba Fittings...L16 Check Vaves L18 Pug and Ba Vaves L19 Roover Vaves...L20 Throtting and Pressure Reief/ Reguating Vaves L21 Soenoid Vaves L23 Air Pressure Reguators...L25 Liquid Pressure Reguators L26 Liquid Pressure Gauges L27 Snubbers...L28 Air Line Fiters...L29 Liquid Strainers, Low to Medium Pressure...L30 T-Stye Strainers, High Pressure.... L32 Sef-Ceaning Strainers...L33 Swive Connectors, Eductors and Fitration Assembies...L34 Hoses and Mounting Bases...L35 Some modes may be avaiabe in BSPT, pease contact your saes representative. L1

2 QuickJet and Systems/Components Spray Nozze Efficient QuickJet and UniJet Spray Nozze Systems are designed to save time in the ceaning and repacement of pugged or worn spray tips. Key feature overview for QuickJet Spray Nozze Systems: Reduce maintenance downtime and costs with fast, easy and accurate change-out of spray tips. True versatiity for any appication with a wide variety of body types/sizes, materias, spray patterns, anges and accessories. Easy and accurate assemby. Feature easy-grip spray tips and integra seas to prevent accidenta mispacement. For QuickJet tips, see section B, Fu Cone Spray Nozzes, section C, Fat Spray Nozzes and section D, Hoow Cone Spray Nozzes. Key feature overview for UniJet Spray Nozze Systems: Quick and easy spray tip repacement. Reduces costs because individua spray tips can be repaced without repacing the entire nozze body. For UniJet tips, see section B, Fu Cone Spray Nozzes, section C, Fat Spray Nozzes, section D, Hoow Cone Spray Nozzes and section E, Fine Spray Nozzes. QuickJet UniJet Femae body Femae body Mae body Mae body Spray tip with sea Spray tip Tip retainer L2

3 QuickJet and Systems/Components Spray Nozze Key feature overview for standard QuickJet nozze bodies: Threaded QuickJet bodies readiy adapt to most manifod and header instaations. QuickJet spray tips avaiabe in wide range of capacities for fat, hoow cone and fu cone patterns. Spray tips are precision machined for fow rate and spray pattern accuracy. Each spray tip s integra sea (either Viton or Buna-N) ensures positive fit between tip and body. Key feature overview for ProMax QuickJet nozze bodies: Moded with engineering grade poypropyene. Durabiity with chemica resistance. Unique ocking system. Spray tip can be inserted by hand and ocked into correct aignment automaticay. Tips incude an integra Viton O-ring sea. Optiona externa O-ring protects nozze against contaminants in harsh environments. Spray tips are avaiabe in fat or fu cone spray patterns and are coor-coded for fow rate identification. Key feature overview for QuickJet adjustabe ba fitting bodies: Easy positioning of QuickJet spray tips within a 50 incuded ange of adjustment. Locking screws maintain nozze position even when jarred or subjected to vibration. Standard QuickJet Bodies ProMax QuickJet Bodies Key feature overview for QuickJet spit-eyeet bodies: Quick and easy mounting to manifod or header. Leak-proof sea provided by Buna-N gasket materia. Avaiabe in brass or 303 Stainess Stee to fit pipe sizes from 0.75" to 2". QuickJet body, camps, bots and gasket incuded. Key feature overview for Kynar QuickJet nozze bodies: Kynar PVDF thermopastic nozzes are FDA compiant. Adapt to most manifod and header instaations. Kynar spray tips specificay matched to nozze bodies and are avaiabe in fat and fu cone spray patterns. Positive spray tip fit with standard EPDM rubber or optiona Viton seas. Each spray tip is matched to the nozze body for quick instaation and automatic aignment. Key feature overview for QuickJet and ProMax nozze system pugs: The QuickJet pug tip can be used to convenienty shut off individua nozzes Key feature overview for UniJet nozze system adapter for QuickJet systems: The UniJet adapter converts UniJet spray tips to the QuickJet System. The adapter accommodates both the threaded cap that hods the UniJet tip, as we as strainers, check vaves, fittings and other UniJet options. QuickJet Adjustabe Ba Fitting Bodies QJJS, QJJA, QJJLA mae bodies QJA, QJLA femae bodies 1/8" to 1/2" NPT or BSPT QuickJet Spit-Eyeet Bodies QPPA mae bodies 1/8" to 3/8" NPT or BSPT Kynar QuickJet Bodies QJA mae bodies 1/4" to 1/2" NPT or BSPT QJASE bodies 3/4" to 2" camp size QQ mae bodies 1/8" to 3/8" NPT or BSPT L3

4 QuickJet and Systems/Components Spray Nozze s Body s Body QJA QJLA QJJS QJJA QJJLA QPPA QJASE QQ Brass (none) 303 Stainess Stee SS 316 Stainess Stee 316SS * ProMax (none) Kynar KY *QJA femae body ony. Other materias avaiabe upon request. Inet F Standard Body M QJA QJLA QJJS QJJA QJJLA QPPA QJA QQ QJASE Body To Camp On Tubing O.D. 3/4 QJASE 1 to 1-1/16 3/4 QJASE-SS (25 to 27)* 1 QJASE 1-1/8 to 1-3/8 1 QJASE-SS (32 to 35)* 1-1/4 QJASE 1-9/16 to 1-11/16 1-1/4 QJASE-SS (39 to 43)* 1-1/2 QJASE 1-3/4 to 2 1-1/2 QJASE-SS (44 to 51) 2 QJASE 2-1/8 to 2-3/8 2 QJASE-SS (54 to 60) *1/2" (12.7 mm) dri hoe. 11/16" (17.5 mm) dri hoe. Pipe Size 3/4* 1* 1-1/4 1-1/2 2 1/8 1/4 3/8 1/2 QuickJet Compete Nozze Nozze Body 1/4 QJJA SS + QuickJet Spray Tip Inet Body Adjustabe Ba Fitting QuickJet Compete Nozze Nozze Body 1/4 x QJA SS + QuickJet Spray Tip Inet Body BSPT connections require the addition of a B prior to the inet connection. L4

5 QuickJet and Systems/Components Spray Nozze QuickJet and ProMax Nozze System Pugs s QuickJet Pug Brass (none) 303 Stainess Stee ProMax QuickJet Pug QJA QJLA QPA SS ProMax (none) Other materias avaiabe upon request. QuickJet Pug QJAPLUG SS QPAPLUG QuickJet Pug ProMax Pug For standard bodies For ProMax bodies UniJet Nozze System Adapter for QuickJet Systems s Body QJA Brass (none) 303 Stainess Stee SS Other materias avaiabe upon request. UniJet Adapter QJA x 11/16 16 SS Adapter Outet Outet Body QJA 11/16-16 For standard bodies L5

6 QuickJet and Systems/Components Spray Nozze Key feature overview for standard UniJet nozze bodies: Threaded UniJet bodies readiy adapt to most manifod and header instaations. UniJet spray tips avaiabe in wide range of capacities for fat, hoow and fu cone patterns. Spray tips are precision machined for fow rate and spray pattern accuracy. Key feature overview for UniJet spit-eyeet bodies: Quick, easy and economica way to mount UniJet nozzes on pipe or tubing. No cutting, threading or brazing assures positive eak-proof sea and cost savings. Precision connector bodies are machined from soid bar stock in brass or 303 Stainess Stee to fit pipe sizes from 0.50" to 1". Design of body inet retards entry of sediment to minimize cogging and maintenance costs. Designed for pressures up to 250 psi (17 bar) with fow rates up to 3 gpm (11.4 /min). Body, camps, bots and gasket incuded. Key feature overview for UniJet pug vave nozze bodies: Versatie in-ine pug with sturdy brass body and one-piece Cecon pug/hande. Positive, quick and easy shut-off operation. Maximum operating pressure 400 psi (28 bar). Key feature overview for UniJet roover nozze bodies: Idea for systems that need frequent ceaning, or where two different spray patterns may be used. Permits quick switch-over between two nozzes. Key feature overview for UniJet ba vave nozze bodies: Positive on/off contro for individua nozzes. Sturdy brass body with stainess stee ba to operate at pressures up to 400 psi (28 bar). Standard UniJet Nozze Bodies UniJet Spit-Eyeet Bodies UniJet Pug Vave Nozze Bodies 1/8" to 1/2" NPT or BSPT (M or F) inet connection 11/16"-16 (M) outet connection /2" to 1" camp size /4" NPT or BSPT (M or F) UniJet Roover Nozze Bodies UniJet Ba Vave Nozze Bodies /4" NPT or BSPT (M or F) 11/16"-16 (F) inet connection 11/16"-16 (M) outet connection /4" NPT or BSPT (M or F) inet connection 11/16"-16 (M) outet connection L6

7 QuickJet and Systems/Components Spray Nozze Body s Inet 1/8 1/4 3/8 1/2 Standard Nozze Body with Tip Retainer F M Standard Nozze Body Ony F M 1/8T 1/8TT CP1335 CP1336 1/8T-SS 1/8TT-SS CP1335-SS CP1336-SS 1/4T 1/4TT CP1321 CP1322 1/4T-NYB 1/4TT-NYB CP12094-NYB CP8028-NYB 1/4T-I 1/4TT-I CP1321-I CP1322-I 1/4T-SS 1/4TT-SS CP1321-SS CP1322-SS 3/8T 3/8TT CP1323 CP1324 3/8T-SS 3/8TT-SS CP1323-SS CP1324-SS 1/2T 1/2TT CP1339 CP1340 1/2T-SS 1/2TT-SS CP1339-SS CP1340-SS Nozze Body* /2T /2T-SS /4T /4T-SS T T-SS To Camp On Tubing O.D. 13/16 to 7/8 (20 to 22) 1 to 1-1/16 (25 to 27) 1-1/4 to 1-3/8 (32 to 35) Pipe Size 1/2 3/4 *Aso avaiabe in stainess stee. 1 UniJet Compete Nozze Nozze Body 1/4 TT SS + UniJet Spray Tip Inet Body UniJet Compete Nozze Nozze Body /2 T SS + UniJet Spray Tip Mode No. Camp Size Body UniJet Compete Nozze Nozze Body /4F x T + UniJet Spray Tip Mode No. Inet UniJet Thread UniJet Compete Nozze Nozze Body /4M x T + UniJet Spray Tip Mode No. Inet UniJet Thread BSPT connections require the addition of a B prior to the inet connection. UniJet Diaphragm Check Vave Nozze Bodies Nozze Body Mode Vave Seat Inet Maximum gpm (/min) s 8360 Nyon SS 1/4" NPT or BSPT (M) 2 (7.6) T TT Brass (none) 303 Stainess Stee SS Mid Stee I Nyon NYB Other materias avaiabe upon request. 4664B Brass or Auminum SS 1/8" NPT or BSPT (F) 1.5 (5.7) L7

8 QuickJet and Systems/Components Spray Nozze Key feature overview for QJ17560-NYB nozze assembies: Drip-free ChemSaver shut-off requires 10 psi (0.7 bar) at nozze to open check vave. Long-asting EPDM rubber diaphragm with optiona Viton avaiabe. Avaiabe to fit 0.50", 0.75" and 1" pipe. Maximum operating pressure is 300 psi (20 bar). Key feature overview for QJ7421 nozze assembies: Avaiabe to fit 0.50", 0.75" and 1" pipe. Maximum operating pressure is 300 psi (20 bar). Key feature overview for QJ1/4TT-NYB and QJ1/4T-NYB nozze assembies: Avaiabe with connections to fit NPT, BSPT (M) or NPT, BSPT (F). Maximum operating pressure is 300 psi (20 bar). QJ17560-NYB QJ7421-NYB QJ1/4TT-NYB QJ1/4T-NYB 1/2", 3/4" or 1" pipe 1/2", 3/4" or 1" pipe 1/4" NPT or BSPT (M) 1/4" NPT or BSPT (F) Nozze Assemby To Camp On Nozze Assemby Inet QJ17560A-1/2-NYB QJ17560A-3/4-NYB QJ17560A-1-NYB QJ17560A-NYB QJ17560A-NYB QJ7421-1/2-NYB QJ7421-3/4-NYB QJ NYB 1/2" Pipe 3/4" Pipe 1" Pipe 20 mm Pipe 25 mm Pipe 1/2" Pipe 3/4" Pipe 1" Pipe QJ1/4TT-NYB 1/4 QJ1/4T-NYB 1/4 UniJet Compete Nozze QJ /2 NYB + Mode No. Pipe Size UniJet Spray Tip UniJet Compete Nozze QJ 1/4 TT NYB + Mode Inet Body UniJet Spray Tip (additiona cap required)* *See your Saes Engineer for aternative caps avaiabe. BSPT connections require the addition of a B prior to the inet connection. L8

9 Strainers Strainers Mode Construction Screen 5053 Brass 8079 Poypropyene 6051 Stainess stee 4514 Sotted Brass Auminum Nyon Stainess stee with 24, 50, 100, 200 mesh Stainess stee with 24, 50, 100, 200 mesh Stainess stee with 24, 50, 100, 200 mesh Mied sot equivaent 16, 25, 50 mesh Mied sot equivaent 16, 25 mesh Mied sot equivaent 16, 25, 50 mesh UniJet Strainer 6051 SS 50 Strainer UniJet Strainer Mesh Size Strainer Mesh Size 4067 Cup Stainess stee Stainess stee with 50, 100, 200 mesh UniJet Strainer 4193A SS 5 50SS Strainer Spring Opening Pressure (psi) Mesh Size 7630 Disc Stainess stee 4193A with check vave* Auminum Brass Stainess stee Poypropyene Stainess stee with 50, 100, 200 mesh Stainess stee with 24, 50, 100, 200 mesh UniJet Strainer 4514 NY 10 Strainer Sot Width *Buit-in check vave and stainess stee springs with opening pressures of 5, 10, 20 or 40 psi (0.35, 0.7, 1.5 or 2.8 bar). s Strainer (50 Mesh) (25 Mesh) (16 Mesh) 4193A Brass (none) Auminum AL Nyon NY Stainess Stee SS Poypropyene PP Other materias avaiabe upon request. L9

10 Fiters, Vaves and Stabiizers Key feature overview for and jet stabiizers: Increase spray projection distance and spray impact on fat spray tips which are mounted at a 90 ange to the iquid suppy ine. Reduce turbuence that is created when the iquid turns the corner in a manifod, tee or ebow and reduce distortions in the spray pattern. Key feature overview for 1325 tip retainer: Used to hod nozze assemby together. Inet connection 11/16"-16 femae thread. Key feature overview for arge capacity check vave: For arger capacity nozzes where strainers are not required. Choice of opening pressures 5 psi (0.35 bar) or 10 psi (0.7 bar). Fow capacity up to 1.5 gpm (5.7 /min). Key feature overview for 4916 metering pate: Avaiabe in 82 orifice diameter sizes from to 0.25" (0.2 to 6.35 mm). Liquid capacity range of to 6.9 gpm (0.03 to 26 /min) at 30 psi (2 bar). See Data Sheets 11739, and Key feature overview for 3942 pug pate: For shutting off fow to a specific nozze by repacing the spray tip. Key feature overview for 9106 fiter: Effective iquid fitering action. Fused bronze for durabiity. 300 mesh screen equivaent. Jet Stabiizers 1325 Tip Retainer Jet Stabiizer UniJet Tip Retainer SS 1/8x1/8 Stabiizer Size CP1325 SS Mode No. BSPT connections require the addition of a B prior to the inet connection Fiter Large Capacity Check Vave 4916 Metering Pate UniJet Check Vave AL 5 Vave 3942 Pug Pate Spring Opening Pressure (psi) s Check Vave Jet Stabiizer Tip Retainer 11750* CP1325 CP8027 Brass (none) Stainess Stee SS 303 Stainess Stee SS Auminum AL Poypropyene PP Mid Stee I Nyon NYB Other materias avaiabe upon request. *Ba and spring are stainess stee. Stainess stee guide vane. L10

11 Adapters s Adapters Mode Inet Thread Outet Thread Length in. (cm) Adapter CP6250 CP /16"-16 (F) 1/8", 1/4", 3/8", 1/2" and 3/4" NPT or BSPT Varies dependent on Connection. Brass (none) Stainess Stee SS Auminum AL Mid Stee I 6406 NA 1/8" NPT (M) or BSPT 15/16 (2.38) Other materias avaiabe upon request. CP6250 NA 1/8" NPT (F) or BSPT 9/16 (1.43) CP4928 NA 1/8" NPT (F) or BSPT 1 (2.54) UniJet Adapter /4 SS Mode No. Outet UniJet Adapter CP6250 SS Mode No. L11

12 Quick Adapters and Caps Key feature overview for QJT-NYB adapter: Fast and efficient for retrofitting conventiona system to Quick UniJet system. Fits 11/16"-16 thread. Up to 300 psi (20 bar) maximum operating pressure. Key feature overview for coor-coded caps: Deveop a unique coor-coding system for safety and contro. Avaiabe in eight coors. Standard EPDM rubber seat gaskets (Viton optiona) assure firm sea between spray tip and cap. Long-asting nyon caps work with a interchangeabe UniJet spray tips for pressures up to 300 psi (20 bar). QJT-NYB Adapter Coor-d Caps Adapter QJT-NYB To Fit 11/16"-16 UniJet Thread Quick UniJet Cap and Seat Gasket Set NYR UniJet Cap and Seat Gasket Set Coor Quick UniJet Cap Ony CP NY UniJet Cap Coor Seat Gasket Ony CP19438 EPR Seat Gasket L12

13 Quick Adapters and Caps Part Number Cap Ony Part Number Cap and Seat Gasket Set For Use with Spray Tips Coor CP25611-*-NY *-NYR UniJet fat spray tips (smaer capacities) Standard sizes through TPU08 Back = 1 CP25609-*-NY *-NYR UniJet fat spray tips (arger capacities) Standard sizes TPU10 through TPU20 White = 2 CP25595-*-NY *-NYR UniJet fat spray tips Sizes through TPU08 can be positioned in choice of two panes: parae or perpendicuar to wings of Quick UniJet cap Red = 3 CP25607-*-NY *-NYR For UniJet tip types: TC, TG, TG-W, TK, TN, TN-SSTC, TPU, T-W, TX Bue = 4 Green = 5 CP25607-*-NY D-Disc Core Core Sea EPR (EPDM rubber standard) VI (Viton optiona) Yeow = 6 QJ4676 Permits use of standard 1/8" and 1/4" nozzes. Can be used for mounting pressure gauge at the nozze. See Data Sheet for more information. Brown = 7 Orange = NYR Provides shut-off at nozze for quick spacing change or change in spray swath. *Specify coor code. If no coor indicated, yeow wi be suppied. Used with disc-core sprays (insert core into sea). These Quick UniJet caps are avaiabe ony in back. L13

14 Spit-Eyeet Connectors Fast and economica way to insta nozzes, gauges, hoses and other fittings in piping systems. Eiminates cutting, threading, brazing. Reinsta nozzes in thread-stripped manifods. Connector bodies machined from bar stock brass or stainess stee with a choice of outet connection sizes. No body rotation within the fange when instaing or removing nozzes. Reduced sediment and minima cogging as inet extends into the pipe. Leak-proof sea with Buna-N camp gasket (optiona fuoroeastomer gasket avaiabe). Avaiabe in a variety of camp sizes and pressure ratings /2" to 1" camp size 1/8" to 1/4" outet connection NPT or BSPT (F) 1-1/4" to 2" camp size 1/8" to 1/2" outet connection NPT or BSPT (F) 2-1/2" to 4" camp size 1/4" to 1" outet connection NPT or BSPT (F) Body Pipe Size To Camp On Outside Dia. Tubing Outside 1/8 1/4 3/8 1/2 3/4 1 Maximum Pressure psi (bar) Capacity at Maximum Pressure gpm (/min) Capacities of 8370 and Vary with Outet Outet Capacity gpm (/min) 1/8 5.5 (21) 1/2 13/16, 7/8 (20-22) 1/4 10 (38) /4 1, 1-1/16 (25-27) 250 (17) 3.5 (13.2) 3/8 15 (57) 1 1-1/8, 1-1/4, 1-3/8 (32-35) 1/2 20 (76) 1-1/4 1-9/16, 1-11/16 (39-43) 3/4 33 (125) /2 1-3/4, 2 (44-51) 125 (9) * (21-76*) 1 54 (204) 2 2-1/8, 2-3/8 (54-60) 2-1/2 2-1/2, 2-7/8 (63-73) , 3-1/2 (76-89) 125 (9) 10-54* (38-204*) 4 4, 4-1/2 ( ) *Capacities of 8370 and vary with outet connection L14

15 Spit-Eyeet Connectors Dimensions and Weights Standard Body A B Dri Hoe Dia. C Body Inet Dia. D Net Weight oz. (kg) A B C /4 (57) 9/32 (7.1) 3/16 (4.8) 11/16 (17.5) 2 (.06) /32 (88) 11/16 (17.5) 7/16 or 9/16 (11.1 or 14.3) 25/32 (20) 6 (.17) D /16 (164) 1-1/4 (32) 23/32 through 1 (18.3 through 25.4) 1-1/32 (26) 24 (.68) Based on argest/heaviest version of each type. s Zinc-pated stee camps/bots with brass body Spit-Eyeet A Stainess stee throughout B Zinc-pated stee camps/bots with stainess connector body Stainess stee camps/bots with brass body C Buna-N camp gasket Fuoroeastomer gasket avaiabe Other materias avaiabe upon request. D Spit-Eyeet Connector 8370 A 1-1/4 x 1/4 Spit- Eyeet Connector Camp Size Outet BSPT connections require the addition of a B prior to the inet connection. Spit-eyeet connectors used with air atomizing nozzes to humidify books prior to bindery operation. L15

16 Adjustabe Ba Fittings Aow positioning of spray nozzes for more exact contro of spray direction and reduced over-spraying. Assure accurate pipe aignment and convenient nozze positioning without disturbing pipe connections. Large interna passages minimize cogging. Smooth finished surfaces assure eak-proof connections. Key feature overview for adjustabe ba fittings: Reativey sma diameter fits appications requiring compact size. Simpe ocking hods nozze securey in position. Maximum pressure rating 300 psi (20 bar). Key feature overview for cast ba fitting with fange: Locking screws hod nozze in position securey. Maximum pressure rating 125 psi (9 bar) Cast Ba Fitting with Fange Mae inet/femae outet 1/8" to 3/4" NPT or BSPT Mae inet/femae outet 1" to 1-1/2" NPT or BSPT Mae inet/mae outet 1-1/4" to 2-1/2" NPT or BSPT Adjustabe Ba Fitting Number Inet Outet Tota Incuded Ange of Adjustment Cast Ba Fitting Number Inet Outet Tota Incuded Ange of Adjustment 1/8 1/8 1 x /4 1/4 1-1/4 x 1-1/4 1-1/4 1-1/4 1/4 1/8 1-1/2 x 1-1/4 1-1/2 1-1/ /8 3/8 3/8 1/ /4 x 1-1/4M 1-1/4 1-1/4* 1-1/4 x 1-1/2M 1-1/4 1-1/2* 40 1/2 1/2 1-1/2 x 1-1/2M 1-1/2 1-1/2* 1/2 1/4 2 x 2M 2 2* 1/2 3/8 2-1/2 x 2-1/2M 2-1/2 2-1/2* 3/4 3/4 *Mae outet connection. L16

17 Adjustabe Ba Fittings Dimensions and Weights s Standard A B B Ba Fitting Cast (M x F) Pipe A Dimensions B Net Weight oz. (kg) 1/8 x 1/8 1-3/8 (34.9) 31/32 (24.6) 2 (.06) 1/4 x 1/4 1-9/16 (39.7) 1-3/32 (27.8) 3 (.09) 1/4 x 1/8 1-9/16 (39.7) 1-3/32 (27.8) 3-1/8 (.09) 3/8 x 3/8 1-25/32 (45.2) 1-3/8 (27.6) 5-1/2 (.16) 3/8 x 1/4 1-3/8 (56.4) 1-25/32 (42) 5-3/4 (.29) 1/2 x 1/2 2-7/32 (61.1) 1-21/32 (48.4) 10 (.49) 1/2 x 1/4 1-7/8 (47.6) 1-3/8 (34.9) 5-3/4 (.29) 1/2 x 3/8 1-7/8 (47.6) 1-3/8 (34.9) 5-3/8 (.16) 3/4 x 3/4 2-13/32 (61.1) 1-29/32 (48.4) 17 (.50) 1 x 1 3-1/2 (88.9) 1-13/16 (46) 64 (1.8) 1-1/4 x 1-1/4 5-1/8 (130.2) 1-13/16 (46) 76 (2.2) Bar Stock: Brass (none) 303 Stainess Stee SS 316 Stainess Stee 316SS Cast: Ba Fitting 36275* Cast Brass (none) Cast Iron 316 Stainess Stee/ 303 Stainess Stee (Bar Stock) SS *If inet and outet connections are different sizes, materia options are brass or 303 Stainess Stee. Other materias avaiabe upon request. A 1-1/2 x 1-1/4 5-1/4 (133.4) 1-13/16 (46) 80 (2.3) Cast (M x M) Based on argest/heaviest version of each type. 1-1/4 x 1-1/4M 5-1/8 (130.2) 1-13/16 (46) 76 (2.2) 1-1/4 x 1-1/2M 5-1/8 (130.2) 1-13/16 (46) 76 (2.2) 1-1/2 x 1-1/2M 5-1/8 (130.2) 1-13/16 (46) 80 (2.3) 2 x 2M 8-1/4 (209.6) 3-1/8 (79.4) 18 bs. (8.2) 2-1/2 x 2-1/2M 9 (228.6) 3-1/8 (79.4) 19-1/2 bs. (8.8) Adjustabe Ba Fitting /2 x 1/2 SS Ba Fitting Inet Outet Cast Ba Fitting with Fange 1 x 1 SS Inet Outet BSPT connections require the addition of a B prior to the inet connection. L17

18 Check Vaves Ba-type and diaphragm check vaves are avaiabe to meet a variety of specifications. Either vave type provides positive drip-free shut-off to maintain ine pressure during on-and-off spraying cyces. Ba-type vaves feature a choice of 5, 10 or 20 psi (0.35, 0.7 or 1.5 bar) rated stainess stee springs. Diaphragm-type vaves offer ine fows without pressure drop through the vave. AB BB 10742A Ba-type 1/8" to 1/4" NPT or BSPT Ba-type 1/4" NPT or BSPT Diaphragm-type 1/4" NPT or BSPT Diaphragm-type 1/2" to 3/4" NPT or BSPT s Check Vaves Maximum Pressure Maximum Fow Rate gpm (/min) Spring Rates AB 125 psi 2 (8) 5, 10 or 20 psi BB (9 bar) 0.5 (2) (0.35, 0.7 or 1.5 bar) 10742A 2 (8) (57) Opening Pressure 7 psi (0.5 bar) Vave AB BB 10742A Auminum AL Brass (none) Stainess Stee SS Nyon NYB Other materia options avaiabe upon request. Ba- Check Vaves 1/8 AB SS 20 Inet/ Outet Check Vave Spring Rating (psi) Diaphragm Check Vave 10742A 1/4 Check Vave Inet/ Outet Diaphragm Check Vave /2 NYB Check Vave Inet/ Outet BSPT connections require the addition of a B prior to the inet connection. L18

19 Pug and Ba Vaves Quick and easy in-ine shut-off. Brass body with Cecon pug/hande. Simpe vave actuation by hande or hex aen wrench fitting. Severa modes are avaiabe to accommodate various thread combinations. Maximum operating pressure 400 psi (27 bar). Pipe connections aso avaiabe in BSPT UniJet ba vaves provide positive on/off contro for individua nozzes and feature brass body and hande with stainess stee ba and fu UniJet system compatibiity /4F x 1/4F or 1/8F x 1/8F 1/4" NPT (F) to 1/8" NPT (F) 1/4F x T 1/4" NPT (F) x 11/16"-16 UniJet THD 1/4M x T 1/4" NPT (M) x 11/16"-16 UniJet THD 1/4M x 1/4F 1/4" NPT (M) x 1/4" NPT (F) /4F x 1/4M 1/4" NPT (F) x 1/4" NPT (M) On/off ba-type 1/4" NPT or BSPT (M or F) inet connection 11/16"-16 UniJet THD outet connection Pug Vave /4F x 1/4F Pug Vave Inet BSPT connections require the addition of a B prior to the inet connection. Outet L19

20 Roover Vaves Idea for systems that need frequent ceaning or where two different spray patterns may be used. Roover vaves permit quick switch-over between two nozzes. A outet connections are 11/16"-16 UniJet threads (M). Compete brass construction provides specia swive inet connection that permits positioning of the spray direction /4M /4F 11/16"-16 UniJet THD swive inet connection 1/4" NPT or BSPT (M) inet connection 11/16"-16 UniJet THD outet connection 1/4" NPT or BSPT (F) inet connection 11/16"-16 UniJet THD outet connection Roover Vave /4M Vave Inet L20

21 Throtting and Pressure Reief/Reguating Vaves Throtting vaves reguate fow in systems equipped with centrifuga pumps. Adjustabe pressure reief vaves accuratey contro spray ine pressures iquid waste caused by excessive pressures is minimized as excess iquid is bypassed back to the iquid source or pump inet. Key feature overview for PP throtting vave: Compact throtting vave with adjusting cap and ock ring. Poypropyene construction features exceent chemica resistance. Key feature overview for PP pressure reief vave: Poypropyene body with nyon adjusting cap means exceent chemica resistance. Easiy hand-adjustabe pressure reief vave. Maintain ine pressure with adjustabe ocknut. Key feature overview for 8460 pressure reief vave: Diaphragm design pressure reief vave. Auminum housing with nyon inet body. Fairprene diaphragm seas off a working parts from contact with iquid and provides responsive, chatter-free operation. Features additiona port for pressure gauge instaation. Key feature overview for 9840 pressure reief vave: Diaphragm design pressure reief vave. Auminum, brass or ductie iron housing with nyon inet body. Fairprene diaphragm seas off a working parts from contact with iquid and provides responsive, chatter-free operation. Features additiona port for pressure gauge instaation. Key feature overview for 6815 pressure reief vave: Piston-type pressure reief vave. Fu fow with minimum pressure oss due to extra arge vave passage. Free-foating seat design improves overa speed and sensitivity of the vave action. Auminum, brass or stainess stee construction. Key feature overview for 110 pressure reief vave: Piston-type pressure reief vave. Guide vane seat stabiizes fow and reduces chatter. Removabe vave bonnet for service without disturbing fuid ine connections. Fu fow with minimum pressure oss due to extra arge vave passage. Free-foating seat design improves overa speed and sensitivity of the vave action. Auminum, brass or stainess stee construction PP PP Throtting vave Pressure reief vave Pressure reief vave (Auminum housing/ nyon inet body) Pressure reief vave (Brass, auminum or ductie iron body) Pressure reief vave extra arge passage Pressure reief vave extra arge passage with guide vane seat L21

22 Throtting and Pressure Reief/Reguating Vaves Inet/Outet Pipe 1/4 3/8 1/2 3/4 Operating Pressure Max. psi (bar) Up to 300 (20) Vave PP PP AL 9840-DI HSS 6815-AL AL 110-DI 300 to 700 (20 to 48) 700 to 1000 (48 to 70) Up to 300 (20) 300 to 700 (20 to 48) 700 to 1000 (48 to 70) Up to 50 (3.5) Up to 150 (10.4) Up to 300 (20) 300 to 700 (20 to 48) 700 to 1200 (48 to 85) Up to 50 (3.5) Up to 150 (10.4) Up to 300 (20) 300 to 700 (20 to 48) 700 to 1200 (48 to 85) 1 Up to 150 (10) 1-1/4 Up to 150 (10) 1-1/2 Up to 150 (10) Dimensions and Weights s Vave Length Net Weight oz. (kg) PP 4-3/8 (111) 2-1/4 (.06) PP 5-1/4 (133.4) 5-3/4 (.19) (203) 14-1/2 (.41) /2 (216) 32 (.91) /8 (168) 20 (.57) /4 (197) 56 (1.6) Based on argest/heaviest version of each type. Vave PP PP * 110 Auminum AL Brass (none) Ductie Iron DI Hardened Stainess Stee HSS Nyon/Auminum NY Poypropyene PP *Brass and auminum ony for operating pressures up to 700 psi; hardened stainess stee ony for pressures from 700 to 1200 psi. Other materias avaiabe upon request. Pressure Reief/Reguating Vave /2 AL Vave Inet/ Outet Pressure Reief/Reguating Vave /2 AL 50 Vave Inet/ Outet Pressure Rating Throtting Vave /2 PP Vave Inet/ Outet BSPT connections require the addition of a B prior to the inet connection. L22

23 Soenoid Vaves Contro on/off fow in automaticay operated systems. Dependabe service in both air and iquid ines with temperatures from 40 to 165 F (5 to 75 C). Ten watt, cass F cois are for continuous duty, UL and CSA approved. Cois are rated for dua frequency operation suitabe for internationa use. Encapsuated coi resists high humidity and fungus growth. 360 rotation avaiabe with durabe eectrostaticay powder-coated encosure. Stainess stee or brass bodies. Stainess stee piot orifice heps eiminate premature eaking and increases service ife in high fow veocity situations. Ke-F or Viton seas are moded into stainess stee foating bottom pungers. Foating pungers automaticay compensate for vibration, shock, wear and deformation whie providing a bubbe-tight sea. Buna-N diaphragm vaves. Versatie mounting in any position, direct pipe mounting. Choose vave action to meet specifications, either diaphragm, piot-operated or direct acting poppet quick exhaust vave increases ine exhaust to a fu 1/4" port (Cv=1.0) resuting in quick shut-off of spray guns without spitting. 2-Way 3-Way Quick Exhaust Vave 1/4" to 1" NPT (F) 1/4", 1/2" NPT (F) 1/4" NPT (F) Air atomizing nozzes Air pressure reguator with gauge Eectrica cabes Air fiter Pressure tank assemby Soenoid vave Coating of eectrica cabes using soenoid vaves, air pressure reguator, air atomizing nozzes and other accessories. L23

24 Soenoid Vaves Dimensions and Weights A A Standard D D C C B B Vave 2-way 3-way Mode Number A B C D /8 (41.3) 2-29/32 (73.8) 1-15/16 (49.2) 11/32 (8.7) /8 (41.3) 2-29/32 (73.8) 1-15/16 (49.2) 11/32 (8.7) /32 (50) 3-9/16 (90.5) 2-19/32 (65.8) 19/32 (15.0) /32 (67.5) 4-13/32 (111.9) 3-13/32 (86.5) 17/32 (13.5) /16 (100) 4-3/4 (120.6) 3-23/32 (94.5) 7/8 (22.2) /16 (100) 4-3/4 (120.6) 3-23/32 (94.5) 7/8 (22.2) /16 (39.7) 3-3/4 (95.2) 2-3/4 (69.8) 1-1/8 (28.6) /32 (78.6) 5-5/8 (143) 3-5/32 (80.2) 1-1/16 (27) /8 (34.9) 4-3/8 (111.1) 3-3/4 (95.2) 1-1/2 (38.1) Compete Soenoid Vave* Mode No. *110 or 120 V, 50/60 Hz coi is standard. If other coi assembies are desired, add the appropriate etter code to the end of the part number. For exampe: A. A = 220 or 240 V, 50/60 Hz B = 24 V, 60 Hz C = 12 VDC D = 24 VDC Quick exhaust /4-AL 1-3/8 (34.9) 1-7/8 (47.6) Based on argest version of each type. Port Mode Number Vave Vave Action Max. Pressure psi (bar) Orifice Size Cv Factor 3/ * (10*) 7/16 (11) way 1/ Piot- 150* (10*) 5/8 (16) 4.0 Operated 3/ Diaph. 230 (16) 3/4 (19) (16) 1 (25.4) 13.0 Body Sea 1/ Direct Acting 60* (4*) 3/16 (4.8).50 Stainess Viton 1/ Poppet 205* (14*) 1/8 (3.2).28 stee Ke-F Forged or cast brass Buna-N 1/ Poppet 100 (7) 3/32 (2.4).25/.38 Forged or Viton 1/ way 150 (10) 1/2 (12.7) 3.6 cast brass Buna-N Diaph. 3/ (10) 7/16 (11.1) 1.6/2.5 Auminum Buna-N 1/ /4-AL Quick exhaust 150 (10.7) 1.0 *For maximum pressures of cois C and D, request Data Sheet Soenoid (1). For use of Cv Factor, request Data Sheet Soenoid (2). Zinc and auminum die cast Buna-N L24

25 Air Pressure Reguators Air pressure reguator Diaphragm-type air pressure reguators feature a baanced vave design. Reieving stye automaticay reieves excessive pressure in a reguated ine. Reguated ine pressure can be reduced with adjusting knob even when ine is dead ended. Non-reieving reguator avaiabe. Bodies and bonnets constructed of die cast auminum, zinc or stainess stee. Stainess stee versions meet NACE standard MR for corrosion resistance. Reguated pressures from 5 to 125 psi (0.3 to 8.5 bar) with suppy ine pressures up to 300 psi (20 bar). Operating temperature range maximums are 0 to 175 F ( 15 to +80 C) with dewpoint ess than air temperatures beow 35 F (2 C). Gauges suppied separatey. Reguators Main Port Gauge Ports Reieving Reguator Non-Reieving 1/4 1/4 1/4 1/8 3/8 1/4 1/2 1/4 1/2 1/4 3/4 1/4 1 1/4 Reieving- Reguator Number Main Ports Gauge Ports Zinc 1/4 1/ S 316 Stainess Stee 1/4 1/ Zinc 3/8 1/ Zinc 1/2 1/ S 316 Stainess Stee 1/2 1/ Auminum 3/4 1/ Auminum 1 1/4 Non-Reieving- Reguator Number Main Ports Gauge Ports Zinc 1/4 1/ Zinc 3/8 1/ Zinc 1/2 1/ Auminum 3/4 1/ Auminum 1 1/4 Dimensions and Weights Standard C A B D E Reguator Number A B C D E 35, 36, 45, /16 (94) 1-7/16 (37) 5-1/8 (130) 2-3/4 (70) 2 (51) 37, /8 (111) 1-1/2 (38) 5-7/8 (149) 3-1/2 (89) 2-1/4 (57) 38, 39, 48, /2 (114) 2-3/8 (60) 6-7/8 (174) 4-1/4 (108) 2-1/4 (57) 45S 2-3/8 (60) 3/8 (10.0) 2-3/4 (70) 1-1/2 (38) 1-1/2 (38) 47S 6-3/16 (157) 1-5/8 (41) 7-13/16 (198) 3-1/2 (89) 2-1/4 (57) Air Pressure Reguator Reguator No. Based on the argest version of each type. L25

26 Liquid Pressure Reguators Diaphragm-type non-reieving iquid pressure reguators. Bodies constructed of brass or brass-pated zinc. Reguated pressures from 5 to 125 psi (0.3 to 8.5 bar) with primary suppy ine pressures. Operating temperature range maximums are 35 to 200 F (2 to 93 C). Gauges suppied separatey. Liquid pressure reguator Dimensions and Weights Reguator Max. psi (bar) Main Ports Gauge Port Body Standard Reguator Number A B C D E (28) 1/4 1/4 Brass (28) 3/8 1/4 Brass A C 250, /4 (108) 1-1/2 (38) 5-3/4 (146) 2-3/4 (70) 2-5/16 (59) (28) 1/2 1/4 Brass (28) 3/4 1/8 Brass (28) 1 1/8 Brass D B /16 (109.5) 1-19/32 (40) 5-15/16 (151) 3-5/16 (84) 2-7/16 (62) E 253, /8 (200) 1-5/8 (41) 9-1/2 (241) 5 (127) 4-7/8 (124) Based on argest version of each type. Liquid Pressure Reguator Reguator No. Typica instaation Air pressure reguator with gauge 3-way soenoid air vave Air fiter Air ine Liquid pressure reguator with gauge Liquid ine Hanger rod Air ine TW ine strainer Air fiter Automatic spray guns 2-way soenoid air vave Air pressure reguator with gauge L26

27 Liquid Pressure Gauges Pressure gauge (Center back connection) Avaiabe in bottom inet connection or center back connection. Eeven bottom inet modes avaiabe from a minimum of 0 psi to a maximum of 300 psi (0 bar to a maximum of 20 bar). Bottom inet gauge has 2-1/2" diameter housing and back connection gauge has 2" diameter case. Patented spring suspended movement protected by a corrosion- and impact-resistant ABS housing with poycarbonate window. A wetted parts are brass with a combination brass/bronze connection and bourdon tube. Dua scaes in psi and bar. Grade B accuracy within ±2% in the midde 50% of the scae, with 3% accuracy in the high and ow ends of the scae has a center back connection with NPT (M) pipe connections in 1/8" or 1/4" sizes. Gauges are housed in a 2" diameter ABS case. Pressure gauge (Bottom connection) Gauge Inet 1/8 1/4 1/8 1/4 Pressure Range psi (bar) 0 60 (0 4) (0 7) Gauge Inet /4 Max. psi (bar) Optimum Operating Range psi (bar) 60 (4.1) ( ) 100 (7) ( ) 160 (11) ( ) 300 (20.7) ( ) 1/8 1/ (0 11) Pressure Gauge /8 60 Gauge Inet Size Pressure Rating Pressure Gauge Gauge Pressure Rating L27

28 Snubbers Gauge snubber Designed to dampen pressure gauge action on a rapidy cyced air ine. For use with air actuated spray guns. Proongs pressure gauge service ife. Improves readabiity of the pressure gauge. Easy disassemby for ceaning. Dimensions and Weights Standard Based on argest version. Length 1-27/32 (47) Dimensions Hex 13/16 (21) Gauge Snubber Max. psi (bar) 300 (20) Inet Gauge Port 1/8 1/8 1/4 1/8 1/4 1/4 Body Brass with stainess stee orifice pate Gauge Snubber /8M x 1/8F Gauge Snubber No. Inet Size Gauge Port Size L28

29 Air Line Fiters Air ine fiter Protects equipment from corrosion and excessive wear by removing iquid and contaminants from air ines , -17, -1, -2, -3 have screw-on transparent poycarbonate bows with bow guards for breakage resistance. These modes are not for use in systems where the air compressors are ubricated with fire-resistant synthetics. A bows have a 50 micron fiter eement and are designed to operate at maximum pressure of 150 psi (10 bar) and a maximum temperature of 125 F (50 C). Manua drain air fiter features a simpe petcock at the bottom of the bow for manua drainage and an easiy accessibe fiter. Automatic drain air fiter is speciay designed for use in inaccessibe ocations and features a foat-operated mechanism that automaticay expes iquid when it is over a critica eve. Manua Drain Air Fiter NPT scfm Approx. Fow at 100 psi* (7 bar*) /min / / / / *With 5 psi (0.35 bar) pressure drop through fiter. Automatic Drain Air Fiter NPT scfm Approx. Fow at 100 psi* (7 bar*) /min / / *With 5 psi (0.35 bar) pressure drop through fiter. Dimensions and Weights Standard Air Fiter A B C D E D B /8 (168) 11/16 (18.0) 5-15/16 (150) 2-3/4 (70) 2-5/16 (59) /8 (168) 11/16 (18.0) 5-15/16 (150) 2-3/4 (70) 2-5/16 (59) A C /8 (187) 11/16 (18.0) 6-11/16 (169) 3-29/32 (99) 3 (76) /2 (292) 1-1/16 (27) 10-7/16 (265) 4-3/4 (121) 4-9/16 (116) /2 (292) 1-1/16 (27) 10-7/16 (265) 4-3/4 (121) 4-9/16 (116) (178) 11/16 (18.0) 6-5/16 (160) 3-5/8 (92) 3 (76) E (178) 11/16 (18.0) 6-5/16 (160) 3-29/32 (99) 3 (76) /8 (283) 1-1/16 (27) 10-1/16 (256) 4-3/4 (121) 4-9/16 (161) Based on the argest version of each type. Air Fiter Air Line Fiter L29

30 Liquid Strainers, Low to Medium Pressure Designed for effective strainer performance with minima maintenance. Protect nozzes, vaves and pumps from damaging debris. Large open screen area for efficient iquid straining at pressures up to 125 psi (9 bar). Removabe bottom pipe pugs for easy fush ceaning. Key feature overview for TW iquid strainer: Removabe bottom cap or pug for compete withdrawa of entire screen assemby. Bottom pipe pug can be repaced with drain cock for quick fush ceaning. Key feature overview for TWC iquid strainer: Handes arge fow rates with minima pressure drop. 1" pugged top outet for pressure gauge instaation. Bottom pipe pug can be repaced with drain cock for quick fush ceaning. Key feature overview for TWF iquid strainer: Handes extra arge fow rates with minima pressure drop. Fange mounting hoe sizes and ocations meet American Standard 125 specifications. 1" pugged top outet for pressure gauge instaation on some sizes. Key feature overview for 16106: Operates at pressures up to 200 psi (14 bar). Simiar in design to standard TW strainers. A bottom pipe pug provides an easy method for fush ceaning. Key feature overview for 9830: For high pressure appications up to 300 psi (20 bar). Designed for easy maintenance. A ribbed cap with gasket sea is easiy removed by hand for screen access. Key feature overview for 122-PP and 122-NYC: Idea for ow voume appications at medium pressures. Hand-removabe guide bow for easy maintenance. Poypropyene bow and head are corrosion and chemica resistant. NYC features cear nyon bow for easy visua inspection of interna screen. See Aso Cataog 35 for compete specifications. TW TWC TWF /4" to 2-1/2" NPT or BSPT (F) 2-1/2" to 4" NPT or BSPT (F) 3" to 6" fange connection 1-1/2" to 2-1/2" NPT or BSPT (F) PP 122-NYC 3/4" to 1" NPT or BSPT (F) (300 psi/21 bar) 1/2" to 3/4" NPT or BSPT (F) 1/2" to 3/4" NPT or BSPT (F) L30

31 Liquid Strainers, Low to Medium Pressure See Aso Key feature overview for 124 and 430 iquid strainers: Six modes to meet particuar specifications. Idea for maximum fow rates. Extra arge stainess stee screens require ess frequent ceaning and maintenance. 124A-SC is a sef-ceaning design that aows the fitered iquid to pass through the strainer whie iquid partices are returned to the iquid suppy. 124ML-AL, 430-ML and 430-SC feature dried hoes for mounting to machinery or an ange iron. Cataog 35 for compete specifications. 124-I 124-AL 124ML-AL 124A-SC 3/4" to 2-1/2" NPT or BSPT (F) 3/4" to 2-1/2" NPT or BSPT (F) 3/4" to 2-1/2" NPT or BSPT (F) 3/4" to 1" NPT or BSPT (F) 430-ML and 430-SC 3/4" to 1-1/2" NPT or BSPT (F) L31

32 T-Stye Strainers, High Pressure Three modes to meet particuar specifications. For pressures up to 2000 psi at 150 F (138 bar at 66 C) and 5000 psi at 150 F (345 bar at 66 C). Key feature overview for high pressure strainer: Easy fush ceaning with removabe bottom pipe pug. Key feature overview for 8310A high pressure strainer: See Aso Cataog 35 for compete specifications. Easy fush ceaning with removabe bottom pipe pug. Screens avaiabe with a variety of mesh sizes. Key feature overview for 2820 high pressure strainer: In-ine strainer. Choice of stainess stee or Mone screens in a variety of mesh sizes A /4" to 1" NPT or BSPT (F) 1/4" to 1/2" NPT or BSPT (F) 1/4" to 1/2" NPT or BSPT (F) L32

33 Sef-Ceaning Strainers AWS Series Unique, effective fitering process aows use of poor quaity water and minimizes the risks of nozze cogging. Large fiter area captures most contaminants and extends time between fush intervas. Wide fitration range 20 to 600 mesh (800 to 10 microns). Minima water fow used for ceaning/fushing so downstream water suppy is not interrupted. Easy to use automatic operation. AWT Series Easy to maintain sef-ceaning. Key feature overview for the AWS Series: Automatic fushing at pre-set pressure drop trip point of 7 psi (0.5 bar) or at pre-set time. Fush cyce: 14 to 40 seconds; continuous fush option. Large screen fiter area: in 2 (1503 to 6000 cm 2 ). Fow rates up to 1760 gpm (6662 /min). Max. working temperature: 140 F (60 C). Inet/outet diameters: 2" to 10" fange connection. 20 to 600 mesh (800 to 10 micron) fitration range. Exhaust vave: 2". Stee construction with NSF approved epoxy-coated internas. Votage: 220/380/440 V, 3 phase; 50/60 Hz. Key feature overview for the AWT Series: Pressure drop trip point: 7 psi (0.5 bar). Fush cyce: 16 seconds. Large screen fiter area: 109 in 2 (703 cm 2 ). Fow rates up to 220 gpm (833 /min). Max. working temperature: 140 F (60 C). Inet/outet diameters: 2" to 3" NPT or BSPT. 30 to 300 mesh (500 to 50 micron) fitration range. Exhaust vave: 1-1/2". Corrosion-resistant poyamide construction. Votage: 110 V, 1 phase. Appications Makeup water in stee production Tank washing Cooing towers Mode No. Minimum Working Pressure psi (bar) Maximum Working Pressure psi (bar) Minimum Fow Rate for Fushing gpm (/min) Maximum Fow Rate gpm (/min) Max. Working Temperature F ( C) Pasteurization process Process water Intake water AWS-1500 AWS-3000 AWS (2) 30 (2) 30 (2) 150 (10) 150 (10) 150 (10) 26 (98) 50 (189) 66 (250) 350** (1325) 660* (2498) 1100* (4164) 140 (60) 140 (60) 140 (60) AWS (2) 150 (10) 110 (416) 1760* (6662) 140 (60) AWT (2)** 115 (8) 35 (132) 110 (416) 140 (60) AWT (2)** 115 (8) 35 (132) 220 (833) 140 (60) *Larger fow rates can be fitered by using mutipe fiters in parae **Or ower, if pressure is increased for fushing L33

34 Swive Connectors, Eductors, Fitration Assembies Key feature overview for singe swive and doube swive connectors: Aow exact positioning of spray nozzes within the swive arc range which can be 280 or 360. Singe or doube swive bodies avaiabe. Easy-turn ocknut hods swive in pace with no sipping. Operate at pressures up to 125 psi (9 bar). Key feature overview for SS swive nut branch tee: Branch tee provides iquid recircuation. Maximum operating pressure: 2000 psi (138 bar). Key feature overview for eductor: Tank mixing eductor nozze increases circuation rates of sma pumps by 4:1 ratio. Prevents setting as agitation assures uniform mixture of chemica soutions. Capabe of circuating arge voumes of iquid. Constructed of cast 316 Stainess Stee or fibergass-reinforced poypropyene for exceent chemica and heat resistance. Variety of threaded connections avaiabe. Key feature overview for fitration assemby: Removes grit, scae and organic soids to hep keep spray nozzes cean and cog-free. Removes simy soids and agae from process water without premature oading. Extra soids hoding capacity provides ong service ife and reduced maintenance. Idea for industria and potabe water appications. Low pressure drop and exceptiona fow capacity. No toos required for disassemby or ceaning. See Aso Cataog 35 for compete specifications. Singe Swive Doube Swive SS 1/8" to 1/4" NPT or BSPT (F) 1/8" to 1/4" NPT or BSPT (M) 1/2"-20 J.I.C. (M) inet/outet connections (1/2"-20 J.I.C. (F) outet to gun) /4" to 1-1/2" NPT or BSPT (M) 3/4" NPT or BSPT (F) L34

35 Hoses and Mounting Bases Key feature overview for Stay-N-Pace hoses: For fast, precise nozze pacement, these bendabe hoses won t move once set in pace. Easy-to-use, fexibe source of targeted air that is changeabe from appication to appication. Compete contro for very targeted, precise air bow-off. Works with a variety of air contro nozzes. Buid your own configuration to fit your unique appications. Bow-off, parts drying and cooing and ubrication are typica appications. Key feature overview for magnetic mounting bases: Fast, easy set-up of air nozzes from appication to appication. Fexibe, works with most any set-up. Permits both vertica and horizonta mounting set-ups. Shut-off vave for added contro. Singe or doube outet modes avaiabe. Stay-N-Pace Hose Magnetic Mounting Base (M) (F) See Aso Compressed Air and Liquid Spray L35