EU2B Series: 30mm Hazardous Location Switches EC2B Series: Hazardous Location Control Stations

Transcription

1 EUB Series: 0mm Hazardous Location Switches ECB Series: Hazardous Location Contro Stations PRODUCT DESCRIPTION Compying with UL, IECEx, and ATEX Directives for hazardous environments, new 0mm EUB Hazardous Location Switches and ECB Hazardous Location Contro Stations provide increased safety for your appications. STANDARDS COMPLIANCE UL c-ul ATEX IECEx Switches Piot Lights Meters Contro Boxes Cass I, Zone AEx d e IIC T6 Gb Cass I Div, Groups A, B, C and D Cass I, Zone, Ex de IIC T6 Gb Cass I, Div, Groups A, B, C and D CERTIFICATE NUMBERS Cass I, Zone, Ex de IIB T6 Gb Cass I, Div, Groups C and D IIG Ex de IIC Gb IID Ex tb IIIC Db IP65 Ex de IIC Gb Ex tb IIIC Db IP65 UL/c-UL ATEX IECEx E4 PTB 08 ATEX 05 U PTB 08 ATEX 00 U PTB 08 ATEX 048 IECEx PTB U IECEx PTB U IECEx PTB 5.00 APPLICABLE STANDARDS Contro Units Standards Mar Pushbuttons Seector Switches Key Seector Switches Piot Lights Meters EN UL UL UL CAN/CSA C. No CAN/CSA C. No CAN/CSA C. No EN EN EN EN IEC IEC IEC IEC Cass I, Zone, Ex de IIC T6 Gb Cass I, Div, Groups A, B, C and D Ex d e IIC T6 Gb Ex tb IIIC T80ºC Db (dust) Ex de IIC T6 Gb Ex tb IIIC T80ºC Db (dust) Contro Unit Options: Pushbuttons Piot Lights Seector Switches Key Seector Switches Emergency Stop Switches Meters Contro Station Options: Pre-configured stations Custom-configured stations Open contro boxes Mounting hoes for up to 8 contro units KEY FEATURES Cass I, Zone /Division Appicabe in exposive gas atmospheres (AEx de IIC T6 Gb) UL Type 4X rated Up to contact bocs Seector switches avaiabe with ever or ey Seector switches avaiabe with overapping contacts Exposed and finger-safe (IP0) screw terminas avaiabe Corrosion resistant stainess stee encosure (SUS04) Meamine coating NPT and Metric reducer options Emergency Stop Switches EN

2 SPECIFICATIONS Genera Specifications Degree of Protection Insuation Resistance Operating Temperature Operating Humidity Atitude Poution Degree Shoc Resistance Vibration Resistance Switches IP65 (IEC6059), Type 4X 00 MΩ minimum (500V DC megger) 0 to +50 C (no freezing) 45 to 85% (no condensation),000m Maximum Operating Extremes Damage Limits Operating Extremes Damage Limits 00-m/s² Emergency Stop Switch: 50-m/s² (without Meter) 000-m/s² 5 to 55-Hz, ampitude 0.5 mm Emergency Stop Switch: 5 to 500-Hz, ampitude 0.5-mm, acceeration 50-m/s² (without Meter) 0Hz, ampitude.5-mm Emergency Stop Switch: 5 to 500-Hz, ampitude 0.5-mm, acceeration 50-m/s² Rated Insuation Votage 600V Resistance 50mΩ maximum (initia vaue) Impuse Withstand Votage (Uimp) 6V Insuation Resistance 00MΩ minimum (500V DC megger) Short-Circuit Protection 50V/0A fuse (Type am IEC6069-/IEC6069-) Conditiona Short-Circuit Current,000A Pushbutton,000,000 operations minimum Mechanica Life Seector Switch 500,000 operations minimum Key Seector Switch 500,000 operations minimum Emergency Stop Switch 50,000 operations minimum Pushbutton 50,000 (switching frequency 800 operations/hr) Eectrica Life Seector Switch 50,000 (switching frequency 900 operations/hr) Key Seector Switch 50,000 (switching frequency 900 operations/hr) Emergency Stop Switch 50,000 (switching frequency 900 operations/hr) Minimum Operator Stroe Required for Emergency Stop Switch 7.0mm Direct Opening Action Maximum Operator Stroe Emergency Stop Switch 9.0mm Note: s wi bounce during operation of pushbuttons and seector switches (reference vaue: 0- ms). Be sure to tae contact bounce time into consideration when designing a contro circuit. Rating (Switches) Rated Insuation Votage (Ui) 600V Rated Therma Current (Ith) 0A* Rated Operating Votage (Ue) 4V 0V 40V 500V AC Resistive Load (AC) 0A* 0A* 6A.8A 50/60Hz Rated Operating Inductive Load (AC5) 0A* 6A A.4A Current (Ie) Resistive Load (DC) 8A.A.A DC Inductive Load (DC) 4A.A 0.55A Note: Up to contacts (per contro unit): 0A contacts (per contro unit): 9A Minimum appicabe oad: V AC/DC, 5mA Appicabe operating ocations may vary according to operating conditions and oad types. Rating Code Designation Therma Continuous Test Current Amperes Maximum current, Amperes Maximum Vot-Amperes 0 Vot 40 Vot 480 Vot 600 Vot 600 Vot Mae Brea Mae Brea Mae Brea Mae Brea Mae Brea A Piot Lights Rated Insuation Votage (Ui) 500V Rated Operating Votage (Ue) Votage 6V, V, 4V AC/DC Transformer 0V, 0V, 40V, 80V, 480V AC Impuse Withstand Votage (Uimp) 4V Insuation Resistance 00 MΩ minimum (500V DC) Frequency 50/60Hz Power Consumption (approx.) Fu Votage 0.W Transformer.5W Life (reference vaue) Approx. 40,000 hours Note: Because the buit-in LED amp is a high-brightness version, the amp may ight dimy due to induction even when power is off. Meters Accuracy Cass.5 Insuation Resistance 00 MΩ minimum (500V DC megger) AC ammeter Rated Insuation Votage (Ui) 00V Operation Moving core Impuse Withstand Votage (Uimp) 4V Power Consumption VA Measurement 5A, 0A, 0A, 50A, etc Input (CT Ratio) A, 5A Extended Memory times, etc Rated Insuation Votage (Ui) 50V Operation Moving coi Impuse Withstand Votage (Uimp).5V Input 0 to0v DC, 4 to 0mA, etc. Power Consumption (DC ammeter) 0.5W Consumption Current (DC votmeter) ma Note: Use a commerciay avaiabe CT (current transformer) for a AC ammeters, and insta the CT in a non-hazardous ocation. Contro Boxes DC input meter Degree of protection Housing Materia Standard Coating Rated Insuation Votage Insuation Resistance Operating Temperature Operating Humidity Atitude IP65 (IEC6059), Type 4X Stainess stee (SUS04) Meamine -coumn: Outside coating -, -coumn: Inside and outside coating 600V (with piot ight or ETA-8PE screw termina boc: 500V) Meter AC input: 00V Meter DC input: 50V 00 MΩ minimum (500V DC megger) 0 to +50 C (no freezing) 45 to 85% (no condensation) 000m maximum Agency Approvas UL/c-UL, IECEx/ATEX certified Appicabe Encosure A encosures except for 6 Contro Units x Coumn Mounting Stye Wa Mount Piot Light Yes Pushbutton Yes Emergency Pushbutton Yes Seector Switch Yes Key Seector Switch Yes Meter Yes Reducer Screw NPT Thread (standard) Metric Thread Degree of Protection IP65, TYPE4X (UL) Grounding Termina Screw Materia Stainess Stee Stranded Wire (mm).5 to.5 Contro Unit Appicabe Wire Soid Wire (mm). to.6 Soid/Stranded Wire (AWG) 6-4 : c-ul exposion protection is different when piot ight is instaed.

3 SWITCHES (CONTROL UNITS) Pushbuttons Emergency Stop Switches Piot Lights Seector Switches Key Seector Switches Meters Pushbuttons Operator (stye / function) B : Fush pushbutton / Momentary B : Extended pushbutton / Momentary EUB - YB F S - D arrangement 0 : NO B : Mushroom pushbutton / Momentary0 : NO 0:NO : NO-NC : NO-NC Part Number YB0➃ D YB0➃ D YB➃ D YB0➃ D YB0➃ D YB➃ D YB➃ D YB0➃ D YB0➃ D YB0➃ D YB0➃ D YB➃ D YB0➃ D YB0➃ D YB➃ D YB➃ D YB0➃ D YB0➃ D YB0➃ D YB0➃ D YB➃ D YB0➃ D YB0➃ D YB➃ D YB➃ D YB0➃ D YB0➃ D Stye and Function Fush Momentary Extended Momentary Mushroom Momentary Arrangement NO NC NO-NC NO NC NO-NC NO-NC NO NC NO NC NO-NC NO NC NO-NC NO-NC NO NC NO NC NO-NC NO NC NO-NC NO-NC NO NC 0 : NC 0 : NC 0 : NC : NO-NC Weight (Approx.) 68g 9g 6g g 94g 8g 76g 0g 5g Button coor Ban: Red, Green, Bac, and White incuded Y : Yeow S : Bue Terminas F : Finger-safe termina (IP0) C : Exposed screw termina Button Coor Ban - suppied with red, green, bac, and white buttons For yeow or bue buttons, specify Y (yeow) or S (bue). Specify a button coor code in pace of in the part number B : bac G : green R : red S : bue W : white Y : yeow Note: Button Coor. Specify a contact termina stye in pace of ➃ in the part number: F (Finger-safe termina), C (Exposed screw termina) Emergency Stop Switches EUB - YBV F R Operator (stye / function) BV : 40mm mushroom/push, pu or twist reease Part Number YBV0➃R YBV➃R YBV0➃R YBV➃R YBV0➃R Operator ø40 Mushroom arrangement 0 : NC : NO-NC 0 : NC 0 : NC : NO-NC Arrangement NC NO-NC NC NO-NC NC Button coor R : Red Terminas F : Finger-safe termina (IP0) C : Exposed screw termina Weight (Approx.) 96g 0g 44g Button Coor R : Red Meters Function M : Meter Input current : A 5 : 5A Specification of overoad scae : times : times 5 : 5 times N:Non Type of meter A : AC ammeter Function M : Meter Input votage or current 00 : 0-0V 00 : 0-mA 40 : 4-0mA etc. Terminas F : Finger-safe termina (IP0) C : Exposed screw termina EUB - YM 5 A 0 F R Set pointer ban : non -R : with set pointer Terminas F : Finger-safe termina (IP0) C : Exposed screw termina Measuring range Direct measuring : A 5 : 5A For current transformers: 0 : 0A 5 : 5A 0 : 0A 0:0A 50:50A 60 : 60A 75 : 75A 00:00A 50:50A EUB - YM 00 VD F-PER-R Type of meter VD : DC votmeter MD : DC ammeter Input Part Number Description AC input meter (ammeter) DC input meter Set pointer ban : non -R : with set pointer Specification of scae -PER : 0~00% -60HZ : 0~60Hz -80HZ : 0~80Hz YM5A5➃ Capacity: 5A Expansion scae: x YM5A0➃ Capacity:0/5A Expansion scae: x YMA0➃ Capacity:0/A Expansion scae: x YM5A5➃ Capacity:5/5A Expansion scae: x YMA5➃ Capacity:5/A Expansion scae: x YMA0➃ Capacity:0/A Expansion scae: x YM5A0➃ Capacity:0/5A Expansion scae: x YMA0➃ Capacity:0/A Expansion scae: x YM5A50➃ Capacity:50/5A Expansion scae: x YM5A60➃ Capacity:60/5A Expansion scae: x YM5A75➃ Capacity:75/5A Expansion scae: x YM5A00➃ Capacity:00/5A Expansion scae: x YM5A50➃ Capacity:50/5A Expansion scae: x YM00VD➃-PER 0-0V DC Input Scae: 0 to 00% YM00VD➃-60HZ 0-0V DC Input Scae: 0 to 60Hz YM00MD➃-PER 0-mA DC Input Scae: 0 to 00% YM00MD➃-60HZ 0-mA DC Input Scae: 0 to 60Hz YM00MD➃-80HZ 0-mA DC Input Scae: 0 to 80Hz YM40MD➃-PER 4-0mA DC Input Scae: 0 to 00% YM40MD➃-60HZ 4-0mA DC Input Scae: 0 to 60Hz Weight (approx.) g Specify a termina stye in pace of ➃ in the part number: F (Finger-safe termina), C (Exposed screw termina) Specify a termina stye in pace of ➃ in the part number: F (Finger-safe termina), C (Exposed screw termina)

4 Piot Lights Part Number YL6➃D YL6➃D YL46➃D YL86➃D YL486➃D YL66➃D YL➃D YL➃D Type Transformer Fu Votage Operating Votage 0V AC 0V AC 40V AC 80V AC 480V AC 6V AC/DC V AC/DC 4V AC/DC Weight (Approx.) 50g 08g Iumination Coor Code R : red G : green A : amber Y : yeow PW : white S : bue Operating votage 6 : AC 0V (Transformer type) 46 : AC 40V (Transformer type) 86 : AC 80V (Transformer type) 486 : AC 480V (Transformer type) Operator (stye / function) L : Piot Light / dome EUB - YL F D R 66 : AC/DC 6V (Fu votage type) : AC/DC V (Fu votage type) : AC/DC 4V (Fu votage type) Lens/LED Coors R : Red G : Green A : Amber Y : Yeow PW : White S : Bue Terminas F : Finger-safe termina (IP0) C : Exposed screw termina Note: Iumination Coor. Specify a contact termina stye in pace of ➃ in the part number: F (Finger-safe termina), C (Exposed screw termina) Position Seector Switches EUB - YSK N F A Operator (stye / function) S : Seector (Knob operator) SK: Key seector (Key operator) Number of Positions / Spring Return Action : -position / Maintained : -position / Maintained R : -position / Maintained (Overap) : -position / Spring return from right J : -position / Maintained (Specia function) : -position / Spring return from eft : -position / Spring return from right : -position / Spring return two-way arrangement 0 : NO 0 : NC : NO-NC 0 : NC 0 : NC : NO-NC 0:NO : NO-NC 0 : NO Key Removabe Position See option codes beow Terminas F : Finger-safe termina (IP0) C : Exposed screw termina Circuit Number Ban : No Designation N* : See charts Operator Position Seector Switches Maintained Spring Return from Right Key Seector Switches Spring Return from Maintained Right L R L R L R L R L R Mounting Mounting Seector Switches Key Seector Switches Operator Position Maintained Maintained L R L R L R YS0➃ YS0➃ YSK0➃➂ YSK0➃➂ YSJ0➃ YSKJ0➃➂ YS0➃ YS0➃ YSK0➃➂ YSK0➃➂ YS0➃ YS0➃ YSK0➃➂ YSK0➃➂ NO NC YS0➃ YS0➃ YSK0➃➂ YSK0➃➂ YS➃ YS➃ YSK➃➂ YSK➃➂ NO YS0➃ YS0➃ YSK0➃➂ YSK0➃➂ NO NC NC YS0➃ YS0➃ YSK0➃➂ YSK0➃➂ NO YS➃ YS➃ YSK➃➂ YSK➃➂ NC YS➃ YS➃ YSK➃➂ YSK➃➂ NO YSR➃ N/A YSKR➃➂ N/A NC Key is removabe in a maintained positions. Specify ey remova position in pace of ➂ in the part number. See tabe. Specify a termina stye in pace of ➃ in the part number: F (Finger-safe termina), C (Exposed screw termina). -position, -position/inverse cam Seector Switch Key Seector Switch L R Boc Position L R Boc Position NO NC NO NO NC NC NO NC YSJ0➃ YSJ0➃ YSJ0➃ YSJ➃ YSJ0➃ YSJ0➃ YSJ➃ YSJ➃ ➂ Key Removabe Option Codes (-position) Code A B C Description Key removabe in any position Key removabe in eft position Key removabe in right position YSKJ0➃➂ YSKJ0➃➂ YSKJ0➃➂ YSKJ➃➂ YSKJ0➃➂ YSKJ0➃➂ YSKJ➃➂ YSKJ➃➂ 4

5 Position Seector Switches L Operator Position C Maintained Spring Return from Right Seector Switches Spring Return from Left Spring Return Two Way Maintained Spring Return from Right Key Seector Switches Spring Return from Left Spring Return Two Way R L C R L C R L C R L C R L C R L C R L C R L C R NO Mounting YS0➃ YS0➃ YS0➃ YS0➃ YSK0➃➂ YSK0➃➂ YSK0➃➂ YSK0➃➂ NO NO NC NC YS0N➃ YS0N➃ YS0N➃ YS0➃ YS0N➃ YSK0N➃➂ YSK0N➃➂ YSK0N➃➂ YSK0N➃➂ YS0➃ YS0➃ YS0➃ YSK0➃➂ YSK0➃➂ YSK0➃➂ YSK0➃➂ NC NC NC NC NO NC YS0N➃ YS➃ YS0N➃➂ YS0N➃➂ YS0N➃ YSK0N➃➂ YSK0N➃➂ YSK0N➃➂ YS➃ YS➃ YS➃ YSK➃➂ YSK➃➂ YSK➃➂ YSN➃ YSN➃ YSN➃ YSN➃ YSN➃ YSN➃ YSN➃ YSN➃ YSKN➃➂ YSKN➃➂ YSKN➃➂ YSKN➃➂ YSKN➃➂ YSKN➃➂ YSK0N➃➂ YSK➃➂ YSKN➃➂ YSKN➃➂ NC NO YSN➃ YSN YSN YSN YSKN➃➂ YSKN➃➂ YSKN➃➂ YSKN➃➂ NO NC NO NO NC NC NC NC NO NC NO NC YSN4➃ YSN4➃ YSN4➃ YS0➃ YS0➃ YS N➃ YS N➃ YSN4➃ YSKN4➃➂ YSKN4➃➂ YSKN4➃➂ YSKN4➃➂ YS0➃ YS0➃ YS0➃ YSK0➃➂ YSK0➃➂ YSK0➃➂ YSK0➃➂ YS0➃ YS0➃ YS0➃ YSK0➃➂ YSK0➃➂ YSK0➃➂ YSK0➃➂ YSN➃ YSN➃ YSN➃ YSN➃ YSN➃ YSN➃ YSKN➃➂ YSKN➃➂ YSKN➃➂ YSKN➃➂ YSKN➃➂ YSKN➃➂ YSKN➃➂ YSKN➃➂ Specify a termina stye in pace of ➃ in the part number: F (Finger-safe termina), C (Exposed screw termina). -position, -position/inverse cam Seector Switch Key Seector Switch L C R Boc Position L C R Boc Position Key is removabe in a maintained positions. Specify ey remova position in pace of ➂ in the part number. See tabe. ➂ Key Removabe Option Codes (-Position) Code A B C D E G H Description Key removabe in any position Key removabe in eft and center positions Key removabe in center and right positions Key removabe in center position Key removabe in eft and right positions Key removabe in eft position Key removabe in right position) 5

6 CONTROL BOXES contro unit contro units contro units 4 contro units 5 contro units 4 contro units 6 contro units 8 contro units 0 contro units BB0N-U BB0N-U BB0N-U B5B04N-U B5B05N-U BB04N-U BB06N-U B5B08N-U B5B0N-U coumns coumn coumns 6 contro units 9 contro units contro units 5 contro units 8 contro units Thread Size Termina Boc Stye Code Description Code Description M M6 ban no termina boc BB06N-U BB09N-U B5BN-U B5B5N-U B6B8N-U M M0 C Exposed screw terminas M M5 F Finger-safe terminas M4 M M5 M40 Other thread size options avaiabe. To specify different N NPT/ thread sizes, use tabe at eft to seect a code to use in N NPT/4 pace of N or N in the part number. N NPT Specify termina boc stye in pace of in part number N4 NPT /4 (standard versions do not contain a termina boc). STANDARD CONTROL STATIONS Contro Unit Coumn pushbutton 0BNN -U 0BNN -U 0BNN -U 0BNN 4-U NO contact Namepate ON Button coor: bac, green, red, and white NC contact Namepate OFF Button coor: bac, green, red, and white Namepate ON Button coor: bac, green, red, and white Namepate OFF Button coor: bac, green, red, and white piot ight 0BN -U 0BN -U 0BN -U 0BN -U 0BN 4-U 0BN 6-U X X 0V AC 40V AC 4V AC/DC 0V AC Iumination coor: green 40V AC Iumination coor: green 4V AC/DC Iumination coor: green seector switch 06BNN -U OFF ON 4 Contro Units Coumn Knob seector -position maintained Name pate OFF-ON OFF ON ey seector switch 06BNN 4-U Key seector -position maintained OFF ON OFF ON (removabe at a positions) 4 Namepate OFF-ON e-stop switch 0BNN 7-U Emergency stop switch NC contact Namepate EMER- GENCY STOP Button coor (red) fush pushbuttons 0BNN -U Mushroom Pushbuttons 0BNN 4-U 4 NO contact, Namepate ON NC contact, Namepate OFF Mushroom momentary, Namepate ON Button coor (bac) Mushroom momentary, Namepate OFF Button coor (red) piot ight/ pushbutton 0BNN 5-U 0BNN 6-U 0BNN -U X X 0V AC Name pate STOP 40V AC Name pate STOP 4V AC/DC Name pate STOP Specify termina stye code in pace of in part no. C (standard screw termina), F (finger-safe screw termina) 6

7 Contro Units Coumn piot ight / seector switch 7BNN -U 7BNN 4-U OFF ON X X 4 0V AC Knob, -position, Maintained, Name pate OFF-ON OFF ON 40V AC Knob, -position, Maintained, Name pate OFF-ON OFF ON Contro Units Coumn piot ight / pushbuttons 0BNN 5-U 0BNN 6-U 0BNN -U X X 0V AC 40V AC 4V AC/DC 4 ➂ NO contact, Namepate ON NC contact, Namepate OFF NO contact, Namepate ON NC contact, Namepate OFF NO contact, Namepate ON NC contact, Namepate OFF pushbuttons 0BNN -U ➂ 4 Contro Units Coumn, Ban namepate meter / pushbuttons 5BNN -U A ➂ Specify input, capacity, and scae, Namepate ON, Namepate OFF Specify the meter's capacity and scae in pace of in the part number piot ights / pushbuttons 40BNN 5-U 40BNN 6-U 40BNN -U X X X X m 0V AC, 40V AC, 4V AC/DC, 0V AC, Iumination coor: green 40V AC, Iumination coor: green 4V AC/DC, Iumination coor: green ➂ ➃, Namepate ON, Namepate OFF, Namepate ON, Namepate OFF, Namepate ON, Namepate OFF piot ight / pushbuttons / seector switch HAND AUTO X X m 4BNN 5-U 4BNN 6-U 4BNN -U 0V AC, 40V AC, 4V AC/DC, ➂ ➃ 5 Contro Units Coumn piot ights / pushbuttons / seector switch OFF ON X X 4 X X m n, Namepate ON, Namepate OFF Knob, -position, maintained Namepate HAND-AUTO HAND AUTO, Namepate ON, Namepate OFF Knob, -position, maintained Namepate HAND-AUTO HAND AUTO, Namepate ON, Namepate OFF Knob, -position, maintained Namepate HAND-AUTO 5BNN 5-U 5BNN 6-U 5BNN -U 0V AC, 40V AC, 4V AC/DC, 0V AC, Iumination coor: green 40V AC, Iumination coor: green 4V AC/DC, Iumination coor: green ➂ ➃ ➄, Namepate ON, Namepate OFF Knob, -position, Maintained,, Name pate HAND-AUTO HAND AUTO Specify termina stye code in pace of in part no. C (standard screw termina), F (finger-safe screw termina), Namepate ON, Namepate OFF Knob, -position, Maintained, Name pate HAND-AUTO HAND AUTO HAND AUTO, Namepate ON, Namepate OFF Button coor bac, green, red, and white buttons) Knob, -position, Maintained, Name pate HAND-AUTO HAND AUTO 7

8 DIMENSIONS A dimensions in mm Contro Units Pushbuttons Shown with finger-safe contacts Fush Piot Lights Shown with finger-safe contacts. ø to 4.5 (pane thicness) ø to 4.5 (pane thicness) Mushroom Extended Emergency Stop Switches Shown with finger-safe contacts Meters Shown with finger-safe contacts Seector Switches Shown with finger-safe contacts Mounting Hoe Dimensions ø ø40 ø ø ø to 4.5 (pane thicness) ø ø to 4.5 (Pane thicness) ø 64.0 ø to 4.5 (pane thicness) min (*note) min Key Seector Switch Shown with finger-safe contacts ø Pane thicness:.0 to 4.5 mm. *Note: The meter can be mounted on the top mounting hoes of a standard 50mm mounting centers. The meter can be mounted on any mounting hoe with a mm or arger mounting center to 4.5 (pane thicness)

9 , contro units x coumn weight:.g/.4g contro unit contro units 50 Hinge ø Mounting tab 00 (mountin g hoe ) 4 Reducer M4 grounding termina M5 id mounting screw,, 4, 5 contro units x coumns weight:.8/4./4.6/5.0 g contro units 50 contro units 50P 4 contro units 50P 5 contro units 4 50P 4-ø0 Hinge A Mounting tab R Reducer M4 grounding termina M5 id mounting screw Dimensions No. of Contro Units A R contro units x coumn weight:.8g contro units 50P ø Mounting tab,, 4, 5 contro units x coumns weight: 4.8/5./6.5/7. g contro units contro units 40 50P or or R Mounting tab contro units 40 50P 5 contro units 40 4-ø0 Hinge A Hinge Reducer M4 grounding termina M5 id mounting screw 4 50P 6.5 Reducer M4 grounding termina M5 id mounting screw 6 Dimensions No. of Contro Units A R or or , 5 contro units x coumn weight:.4g 6 contro units x coumns weight: 8.g 4 contro units x50p 5 contro units 4x40P ø Mounting tab Contro Unit Mounting Hoes 40 4-ø Mounting tab Hinge Reducer M4 grounding termina M5 id mounting screw 5 50P Hinge Reducer M4 grounding termina M5 id mounting screw 9

10 Termina Bocs Termina bocs are not suppied with the standard contro boxes (without wiring). When wiring inside the contro box is required, specify the wiring circuit. The termina boc type used on the contro boxes with wiring depends on the termina stye of the contro unit. C termina stye exposed screw termina ETA-8PE 4 poyamide IECEx TUR 5.004U, TÜV 5 ATEX 7799U F termina stye finger-safe screw termina IP0 camp termina: 64-8 (WAGO) poyamide IECEx PTB U, PTB 98 ATEX 9U The number of termina bocs, poes, and the instaation direction that can be instaed on the contro box are as foows: -coumn, units ( termina boc /8 poes) -coumn units ( termina boc / 8 poes) 0 -coumn 4, 5 units ( termina boc / 8 poes) coumn, units ( termina bocs /6 poes) Fittings and Reducers Reducers instaed at the bottom of the contro box are as foows: coumn: reducer, coumns: reducers, coumns: reducers. Materia is nice-pated brass. Use cabe ead-in fittings that are commerciay avaiabe. See the foowing tabe for optiona reducers. Contro Box Stye Part No. Thread Size Symbo UL c-ul EC9E-HM6E-UL M6 M coumn ( to contro units), coumns (, contro units),, coumns (4, 5 contro units) coumns (6 contro units) EC9E-HM0E-UL M0 M EC9E-HM5E-UL M5 M EC9E-HME-UL M M4 EC9E-HNPTE-UL NPT / N EC9E-HNPTE-UL NPT /4 N EC9E-HNPTE-UL NPT N EC9E-H4M5E-UL M5 M EC9E-H4ME-UL M M4 EC9E-H4M40E-UL M40 M5 EC9E-H4NPTE-UL NPT /4 N EC9E-H4NPTE-UL NPT N EC9E-H4NPT4E-UL NPT /4 N4 : Standard reducer : non-standard reducer The reducers in the tabe above are for repacement use ony. A ECB boxes are suppied with a reducer that has been secured to the housing per UL reguations. If it is necessary to repace a reducer, the user shoud foow appropriate UL standards for securing to ECB housing. -coumn 4,5 units (4 termina bocs/ poes) -coumn, units ( termina bocs/ 4 poes) -coumn 4, 5, 6 units (6 termina bocs/ 8 poes) ACCESSORIES A dimensions in mm Namepates Used for piot ight, pushbutton, seector switch, and ey seector switch. Namepate Inserts Appearance Part Number Dimensions EU9Z-NM (6.5) 40 (5) 8.5 ø40 Maring Pate Appearance Legend Part Number Materia: Auminum Instaing the Insert to the Namepate Insert Ban ON OFF START STOP OFF-ON HAND-AUTO HAND-OFF-AUTO EU9Z-NP0 EU9Z-NP EU9Z-NP EU9Z-NP EU9Z-NP4 EU9Z-NP EU9Z-NP5 EU9Z-NP5 Removing the Insert from the Namepate Fat screwdriver Insert Namepate To remove the Insert, insert a fat screwdriver between the Insert and Namepate. 0

11 ø40.5 Rubber Boots Appearance Description/Usage Part Number For Fush Pushbuttons Emergency Stop Switch Padoc Cover Used with YBV emergency stop switch to maintain the switch in the atched status. Appearance Part Number Dimensions Not for use with name pate EU9Z-DB Base For Fush Pushbuttons For use with name pate EU9Z-DBN EU9Z-PCE 46 For Extended Pushbuttons Not for use with name pate EU9Z-DB Coating: yeow Materia: Stainess Stee Mounting Hoe Pug For Extended Pushbuttons Used to pug unused mounting hoes (ø0.5) on the mounting pane. Appearance Part Number Dimensions / Usage For use with name pate EU9Z-DBN. EU9Z-BP ø40 Emergency Stop Switch Namepate Sticers..0 to 0.5 (pane thicness) Appearance Legend Part Number Dimensions Buttons ø58 Appearance Stye Part Number Button Coor Code Ban EU9Z-NVS0 Fush HWA-B Emergency Stop EU9Z-NVS7 5 ø58 ø40.5 Extended HWA-B Specify a coor code in pace of in the Ordering Number. R : red G : green B : bac Y : yeow W : white S : bue Materia: yeow synthetic paper Legend: bac ø40 Mushroom HWA-B4 Padoc Cover YB extended pushbutton: to maintain atched status YB fush pushbutton/ysk ey seector switch: to prevent operation Appearance Part Number EU9Z-PC Dimensions Materia: Poyaceta Lenses Appearance Lens Coor Part Number Red EU9Z-LR Green EU9Z-LG Amber EU9Z-LA Yeow EU9Z-LY White EU9Z-LW Bue EU9Z-LS Materia: AS resin (gaset suppied) Note: mounted to outside of encosure with screws, not provided by IDEC Materia: Stainess Stee

12 LED Lamps Contro Box Shade Shape Part No. Appicabe Contro Box Dimensions (mm) H W D Operating Votage 6V AC/ DC±0% V AC/ DC±0% 4V AC/ DC±0% Current Draw AC 8mA DC 7mA (A, R, W) 5.5mA (G, PW, S) Part Number LSTD-6 ma 0mA LSTD- ma 0mA LSTD- Iumination Coor Code Specify a coor code in pace of in the part number R : red G : green A : amber PW : white S : bue Use a white (PW) LED with yeow (Y) ens. Base BA9S/ H D W Materia: stainess stee Thicness: mm Photo: Part No. EC9Z-FA5 EC9Z-FAM *B *B EC9Z-FAM *B EC9Z-FA5 4*B 5*B EC9Z-FA *B *B EC9Z-FA5 4*B 5*B EC9Z-FA *B *B EC9Z-FA5 4*B 5*B EC9Z-FA6 6*B Protects contro units from direct sunight and rain. The surface of the contro box shade is uncoated. Can be instaed by tightening to the mounting tabs on the contro box. OPERATING INSTRUCTIONS Instaation Area Do not insta the ECB contro box in an environment where more than IP65 protection degree (more than Type 4X in North America) is required. Use the ECB contro box under ambient temperature of 0 to +50 C. If the contro box is exposed to direct sunight and the surface temperature may rise above 50 C, provide a shade to eep the surface temperature beow 50 C. Instaation Use four M6 bots for -coumn, four M8 bots for - and -coumn, or other methods with equivaent strength to insta the contro box. Mounting tab thicness is.5mm for coumn and mm for,, and 4 coumns. If bots become may oose due to vibration, use spring washers. If bot corrosion is anticipated, use anti-corrosion bots or other countermeasures. Notes on Emergency Stop Switches When using the emergency stop switches on safety-reated parts of the contro system, observe safety standards and reguations of the reevant country or region. Aso be sure to perform a ris assessment before operation. Opening/Cosing the Lid Use a Phiips screwdriver to oosen id mounting screws. Whie hoding the unhinged side, open the id sowy without exerting excessive force on the hinge. Before cosing the id, mae sure of the foowing: No foreign substances are on the pacing or oint surfaces. No dispacement of the waterproof pacing. Wires are not caught between the oint surfaces. Next, cose the id sowy and tighten the screws to a proper torque of.6 to.4 N m. Limitation of the Operating Current Maor heat sources comes from the wiring which is connected to the contro box. Therefore, not ony the operating current but wiring conditions (size, no. of wires, no. of wire bundes) may cause temperature rise. When wiring, observe the foowing conditions. Stranded wire:.5 to.5 mm (UL-c-UL certified) / Soid wire: ø. to ø.6 mm (6 to 4 AWG) Maximum no. of wires per bunde: 6 Maximum operating current: 0A When using the contro box under an operating environment of 40 C minimum, use a heat resistant cabe of C minimum. Determine the operating current so that the tota heat vaue of wire bunde is beow 00 [A wires]. Aso, when cacuating the heat vaue, tae the current fuctuation (0%) into consideration. [cacuation exampe: 4**B (8 circuit)] Appy 0A to circuit, A to the remaining 7 circuits: {(0A.) wires} + {(A.) 4 wires} 59 (can be used because < 00) Appy 0A to circuit, A to the remaining 7 circuits: {(0A.) wires} + {(A.) 4 wires} 0 (cannot be used because > 00) See the tabe beow for the aowabe operating current when appying current eveny to each contro box. Aowabe Operating Current Contro Box Part No. Max. No. of Circuits Max No. of Wires per Bunde (*) [wires] ([wires] [bunde]) Without terminabocs With termina bocs Aowabe Operating Current (reference) (*) 6 (6 ) 8 (8 ) 7A 6 6 (6 ) 8 (8 ) 5A 9 6 (6 ) 8 (8 ) 4A 4 6 (6 ) 6 (6 ) A (6 ) 6 (6 ) A (6 ) 6 (8 ) 5A 8 (6 ) 6 (8 ) 4A 4 4 (6 ) (6 ) A 5 0 (6 ) (6 ) A 8 48 (6 ) 4 (8 ) 5A 7 48 (6 ) 4 (8 ) 4A (6 ) 48 (6 ) A (6 ) 48 (6 ) A (6x) 48 (6x) A *: Mae sure that the number of wires per bunde is a maximum of 6 by reducing the wiring or by umper wiring. The maximum number of wires per bunde may need to be further reduced depending on the wire size, ead-in fitting, or conduit size. *: The aowabe current vaue (reference) when appying current eveny to a circuits of the maximum number of circuits.

13 Wiring Wiring Construction Observe the aws and reguations in each country concerning wiring construction.use cabe wiring or meta conduit wiring for instaation in hazardous ocations. If foreign obects or water may enter the box, insta a seaing fitting near the cabe entry of the box and sea the contro box using a compound. Standard type contro boxes do not contain a termina boc. Wire the contro units directy. Appicabe Wires Stranded wire:.5 to.5 mm, soid wire: ø. to ø.6 mm (AWG6 to 4). Do not connect more than wires to the same termina. Appicabe crimping termina Ring and spade terminas cannot be used for EUB contro units with IP0 finger-safe terminas. Ring and spade terminas cannot be used for IP0 camp type termina bocs. When connecting two ferrues to an EUB contro unit, use ferrues without insuating sheath. (Spade termina) (Ring termina) (Ferrue) 6.9 max..6 min 6.9 max. ø.6min..8 max. Without insuating sheath.8 max. With insuating sheath Insuation sheath Wire Removing and Instaing the Unit / Lamp Unit To remove the contact unit or the amp unit from the operator, pu the protruding yeow part of the ocing ever outwards as shown in the figure beow using a screwdriver, and turn it to the eft. The contact unit or amp unit can be removed. YB/ YBV YS/ YSK (Turn) (Lift) ocing ever YL (Lift) (Turn) ➂ (Pu) ocing ever ➂ (Pu) When the contact unit is removed from the emergency stop switch operator, the NO contact coses and the NC contact opens. Do not turn the ocing ever when the contact unit is removed from the operator (the red indicator protruding out, see the figure beow) or the switch can be damaged. ocing ever indicator (red) TOP.4 max. 5.5 min. For screw termina ETA-8PE (Ring termina) 5.5 min. 8.0 max. For IP0 camp termina (WAGO: 64-8) 8.0 max. Dimensions after crimping Pane mounting for the operator, ens unit and meter Remove the ocing ring from the operator and chec that the rubber gaset is in pace. Insert the operator from the pane front into the pane hoe. Pace the proection on the operator with TOP (Ring termina) 8.5 max. ø4. min. Insuation sheath 8.5 max. ø4. min. Insuation sheath 5 to to 6.6 Recommended crimping termina (WAGO) Ferrue with insuating sheath: 6-04 Ferrue without insuating sheath: 6-04 Crimping pier: Recommended Tightening Torque EUB contro units (M.5) and ETA-8PE termina boc (M4):.0 to. N m Warning Incorrect wiring may cause fire hazard. Observe the foowing conditions. Be sure to insta an insuating sheath on the crimping termina or the crimping termina with insuation. When connecting soid wires or stranded wires directy, strip the insuation as mentioned beow, and insert the wire a the way in. EUB Contro units: 8.6 mm maximum IP0 crimping termina: 8 to 9 mm When using stranded wires, mae sure that there are no wire whisers. Mae sure that the spade crimping terminas and ferrues are inserted a the way in. Use insuated ring terminas for the ETA-8PE termina boc. Use ony appicabe crimping terminas and do not directy connect stranded wires or soid wires. maring upward and the recess on the mounting pane in the same direction. Meters have no proection. Tighten the ocing ring using ring wrench XN9Z-T to a torque of.5 Nm. When using a namepate or padocing cover, insta it between the operator and pane. Mae sure that the groove of the nampate or padocing cover and the proection on the TOP maring of the operator are in the same direction. Note: The ocing ring for emergency stop switches and meter Insuation Sheath is metaic. The meter can t mount the namepate or podocing cover. Wire Instaing the contact unit and amp unit 5.5 to 6.0 A dimensions in mm. To insta the contact unit, pace the TOP maring on the operator and the TOP maring on the contact boc adapter in the same direction, and then attach the contact unit to the operator. Then turn the ocing ever to the right. Foow the same procedure when instaing the amp unit. When instaing the amp unit, chec that the inner ens is not oose. The contact boc adapters for emergency stop switches cannot be used for pushbuttons, seector, or ey seector switches. TOP maring Proection Namepate or Padocing cover Recess on the pane Rubber gaset Recess on the Namepate Namepate gaset Locing ring YB YS YL TOP maring TOP maring inner ens TOP

14 Removing the Boc To remove the contact boc, insert a fat screwdriver under the atch of the contact boc adaptor and disengage the atch as shown in the figure beow. Instaing EU9Z-PC Padoc Cover (Fush/extended pushbtton/ey seector switch) EU9Z-PC can be instaed in the foowing two ways. Remove the cover in the reverse step of instaing the cover. Do not insta or remove the cover forcefuy, or it wi cause faiure. [Instaation A] Cover Fat Screwdriver Instaing the boc When instaing the contact boc after maintenance or wiring, mae sure that the contact configuration is correct. Instaing the contact boc in the incorrect position or incompete instaation may cause mafunction of the switch. Remove the contact boc from the operator before instaing the contact boc to the contact boc adaptor. Aso mae sure that the contact boc is correcty instaed to the contact boc adaptor before attaching the operator. Do not insta the contact boc adaptor with the operator attached. Otherwise, mafunction may resut. Protective Grounding Protective grounding must be performed according to the instaation environment and rating requirements. Observe aws and reguations set by each country. Connect the M4 grounding termina of the ECB contro box to a proper ground (grounding resistance 0Ω maximum). When operating the ECB contro box by connecting to circuits of 00V or beow, the grounding resistance must be 00Ω maximum. When using cabes, connect one of the cabe cores to the grounding termina in the encosure. If the grounding termina in the encosure cannot be used, use the M4 grounding termina on the outside of the encosure. Recommended tightening torque: M4:.0 to. Nm M6:.9 to 5.4 Nm For grounding, use appropriate wires (size, materia, insuation) that can toerate the expected maximum grounding current. Be sure to protect the grounding wire with protection, such as meta conduit, from externa damage. Accessories Padoc Cover The foowing padocs and hasps can be used. (Padoc Size) a b c Fush/extended pushbutton/ey seector ø.5 to 5 mm min. mm max. switch 7.0 mm ø5.5 to Emergency Stop Switch 7.0 mm Recommended Hasp Manufacturer Part No. Panduit PSL-, PSL-A, PSL-.5, PSL-.5A, PSL-HD Master Loc 40, 4 Padoc and hasp are avaiabe in various shapes and sizes. Mae sure that they do not interfere with the contro units. Note: Not suppied by IDEC. Keep the tota weight of padoc and hasp under 500g max, otherwise the switch may mafunction or resut in faiure. No vibration shoud be appied when padoc or hasp are instaed. When padoc or hasp are disfigured, stop usage immediatey. Ensure that no shoc or eectric spars are generated. When using the pate oc padoc cover with the extended pushbutton, the switch contact may turn on/off when the cover is being instaed. Ensure to provide functiona safety measure to prevent unexpected startup. When using the padoc cover on the safety-reated part of the contro system, observe safety standards and reguations of the reevant country or region. Aso be sure to perform ris assessment before operation. [Instaation B] This method is effective when the neighboring contro unit interferes when instaing in method A. Cover Instaing EU9Z-DB Rubber Boots To insta the rubber boot on fush and extended pushbuttons, pace the rubber boot on the cap and push the rubber boot hoder straight. The notches around the rubber boot must show eveny. Rubber boot hoder Rubber boot Cap Notches Notches for screwdriver Push-in position Push the rubber boot hoder further around on the two notches on the hoder so that the hoder fits the button competey Mae sure that the rubber boot and rubber boot hoder are instaed straight. On Namepate Types, the EUB and the rubber boot hoder must be aigned so that when instaed, the anti-rotation proection on the EUB comes to the center of the groove on the hoder. Mae sure that the rubber boot is instaed competey, otherwise water dropets might enter the rubber boot, but no water wi enter the contro box. Aign To remove the rubber boot from the fush and extended pushbuttons, genty insert the sotted screwdriver (0.5t x 4w or beow) inside a notch on the rubber boot hoder and tit to the direction shown by the arrow. To prevent damage, do not appy excessive force to the EUB when removing the rubber boot. 4

15 Maintenance and Inspection EUB switches shoud be instaed in an appropriate contro box. Maintenance and Inspection Method Perform daiy or periodica maintenance and inspection for items such as damage and temperature rise of the EUB switches isted in the Maintenance and Inspection tabe beow. Observe aws and reguations set by each country. Do not open the id when inspecting the ECB whie it is energized. Never disassembe the contro box. Do not use toos that cause spars during maintenance and inspection. When using measuring devices, use exposion-protected types. When the ECB needs to be disassembed or assembed for maintenance or repair, contact IDEC. Maintenance and Inspection Inspection Items Inspection Method Inspections Measures Encosure base Tightening bot, screws Pacings Connecting parts Temperature rise Visua Visua, tactie Visua Visua, tactie Thermometer, tactie No rusting No damages No oosening No rusting No cracs No apparent deformation No oosening of screws No dirt on insuation materias Surface temperature 80ºC max. Disposa Observe aws and reguations set by each country concerning refuse disposa. Ceaning Rust-resistant treatment Tightening Ceaning Repacement Tightening Ceaning Investigate the cause Safety Precautions EUB Contro Units Use EUB switches that are appicabe for use in hazardous areas (potentiay exposive atmosphere where exposive gas or vapor may exist), otherwise exposion or fire hazard may resut. EUB switches can be instaed ony in zones and. Do not use in zone 0. Turn power off to the EUB switches before instaation, remova, wiring, or maintenance, otherwise exposion, fire hazard, or eectric shoc may resut. Do not disassembe, repair, or modify, otherwise damage or accident may resut. Do not use damaged EUB switches, otherwise damage or accident may resut. When connecting externa devices, mae sure that each cabe is connected to the correct termina, otherwise eectric shoc, fire hazard, or exposion may resut. Use wires of a proper size to meet votage and current requirements. Incorrect wiring may cause abnorma temperature rise and ead to fire hazard and exposion. Connect the grounding termina to a proper ground, otherwise eectric shoc, fire hazard, or exposion may resut. Operate the EUB switches at the rated current and votage specified in this cataog, otherwise short-circuiting, fire hazard, or exposion may resut. Stop operation immediatey if abnorma operation occurs. Otherwise, a secondary accident may occur. Use exposion-proof eectrica equipment that are appicabe for use in hazardous areas (potentiay exposive atmosphere where exposive gas or vapor may exist), otherwise exposion or fire hazard may resut. ECB Contro Boxes ECB contro boxes can be instaed ony in zones and. Do not use in zone 0. In North America, the ECB can be instaed in Division areas, but cannot be instaed in Division areas. Turn power off to the ECB contro box before instaation, remova, wiring, or maintenance, otherwise exposion, fire hazard, or eectric shoc may resut. Specia sis and nowedge of exposion protection, eectric system instaation, and reevant aws/reguations are required to transport, insta, wire, operate, repair, and inspect the ECB contro box. Peope without such expertise must not use the ECB contro box, otherwise damage or accident may resut. Do not modify the ECB, otherwise damage or accident may resut. Do not use a damaged ECB contro box, otherwise damage or accident may resut. When connecting externa devices, mae sure that each cabe is connected to the correct termina, otherwise eectric shoc, fire hazard, or exposion may resut. Use wires of a proper size to meet votage and current requirements. Incorrect wiring may cause abnorma temperature rise and ead to fire hazard and exposion. Connect the grounding termina to a proper ground, otherwise eectric shoc, fire hazard, or exposion may resut. Do not sit on or hang from the ECB contro box, otherwise damage, persona inury, or accident may resut. Do not open the id of the ECB contro box when it is energized, otherwise eectric shoc, fire hazard, or exposion may resut. Operate the ECB contro box at the rated current and votage specified in this cataog, otherwise short-circuiting, fire hazard, or exposion may resut. When measuring the insuation resistance of the ECB contro box, mae sure that potentiay exposive atmosphere of exposive gas or vapor does not exist in the vicinity, otherwise exposion may resut. Aso, do not touch the terminas without paying attention, otherwise eectric shoc wi resut. Do not pace any obstaces in front of the namepate. Do not remove the namepate. When opening the id for wiring, maintenance or inspection, mae sure that substances such as dust, concrete powder, or meta powder do not enter inside the box, otherwise contact faiure or insuation faiure may resut. Do not drop the ECB contro box during transportation. Be sure to open the carton the right way up, otherwise damage or persona inury may resut. Chec that the product is what you have ordered. Using an incorrect mode might resut in mafunction or accident. Stop operation immediatey if abnorma operation occurs. Otherwise, a secondary accident may occur. The surface temperature of the ECB contro box may become extremey hot during operation. Before maintenance or inspection of the ECB, be sure to wear goves to prevent burning your hand. 5

16 TO: IDEC Corporation Company: ECB TEL: -coumn Contro Box Specification Sheet No. of Contro Box Person: FAX: Seect the required specifications by checing the checboxes, and specify the detais. Contro box size NP Namepate E NP E NP E NP 4 E NP 4 5 E Namepate (NP) Materia: Acryic (5 mm mm, pate thicness mm) Legend coor: bac etter, white bacground Maximum no. of etters: 9 etters per ine (up to ines) No ine ines namepate st ine nd ine Contro Units Position Contro Unit Part No. Contro Unit Namepate ON OFF START STOP EMERGENCY STOP OFF ON HAND AUTO HAND OFF AUTO Ban No namepate Specify etters ( ) ON OFF START STOP EMERGENCY STOP OFF ON HAND AUTO HAND OFF AUTO Ban No namepate Specify etters ( ) 4 5 Lead-in Fitting (E/E) Without specification (standard reducer) With specification UL/c-UL, IECEx/ATEX certified ON OFF START STOP EMERGENCY STOP OFF ON HAND AUTO HAND OFF AUTO Ban No namepate Specify etters ( ) ON OFF START STOP EMERGENCY STOP OFF ON HAND AUTO HAND OFF AUTO Ban No namepate Specify etters ( ) ON OFF START STOP EMERGENCY STOP OFF ON HAND AUTO HAND OFF AUTO Ban No namepate Specify etters ( ) 0, 0, 0 40, 50 NPT /4 0, 0, 0 40, 50 Code Cabe ead-in method Chec Specification Code Cabe ead-in method M6 M0 E M5 Reducer E M Reducer NPT / NPT /4 NPT NPT Chec Specification M5 M M40 NPT /4 NPT NPT /4 Specify wiring diagram when wiring is required. Specify when other accessories are required. IDEC Corporation 75 Eo Drive Sunnyvae, CA IDEC (4) Fax: IDEC Corporation. A Rights Reserved. EU9Y-DS