MOUNTING BRACKET SET. 2RT 2RT = Type-II Rectangle 3AS = Type-III Asymmetrical 5SQ = Type-V Square 4CBPB = Couter/Pro Beam L I G H T I N G

Transcription

1 Product # Type Date Project Name Tunne LED Project Location Prepared By Housing Encosure Extruded, ow copper, corrosion resistant auminum aoy 6063-T5 and cear anodized, Cass 1, Type II per specification AA-M10-C12-A41 Physica Size Avaiabe uminaire suitabe for three engths, 24, 48 and 60. The typica cross section of the uminaire sha be x Deivered Lumen Output Ranges Lumens/Watt. Minimum 6785 umens to maximum 39,449 umens. For 24 ong uminaire - Deivered umens from 6875 to 7850 umens. For 48 og uminaire - Deivered umen from 135, to 31,559 umens For 60 ong uminaire - Deivered umens from 16,963 to 39,449 umens Power Input 120VAC, 208VAC, 240VAC, 277VAC, 347VAC, 480VAC 50/60HZ. L = 24 or 48 or 60 Ordering Guide LENGTH MODEL 1, 2, 3 TWL-S 2 - TWL-S 1=24-2=48 - TWL-D 3=60-2=48-3=60 - LIGHT SOURCE 1 W W, W W W W W W W W W LED-CCT 5K 3K = K 4K = K 5K = K PHOTOMETRIC CHOICES 2RT 2RT = Type-II Rectange 3AS = Type-III Asymmetrica 5SQ = Type-V Square 4CBPB = Couter/Pro Beam Note: North Star Lighting reserves the right to modify specifications without notice. MOUNTING BRACKET SET AW FC = Fixed on Ceiing FW = Fixed on Wa AC = Adjust. on Ceiing AW = Adjust. on Wa XX = Custom INPUT VAC U V1 = VAC V2 = 347VAC V3 = 480VAC OPTIONS SS DF = Dua Fusing C6 = 6' 14/3 SOOW 600V 90C CABLE CT6 = 6' 1/2" SS FL.EX CONDUIT 2C = 2-Circuit output DIM =Dimming 0-10V DALI = DALI Interface DMX = DMX Interface SS = Stainess Stee Brkt. 835 Industria Drive, Emhurst, IL

2 Tunne LED Optica Choices Optica distributions choices suitabe for Threshod, Transition, Interior and Exit zones for for narrow, medium and wide tunnes for optimum performance - maximum uminance, minimum Veiing gare Luminance and utimate uniformity using fewest uminaires. Avaiabe Counter-Beam or Pro-Beam optics without requiring any externa shieding. Moduar optica assembies are designed to aign optica axis and optica center precisey with amp ight center with amp support for consistent optica performance for the a uminaires. Quick and easy too-ess access for servicing Too ess access for re-amping, fuse inspection/repacement, check and repace moduar quick reease and detachabe eectrica components tray assemby and power feed connection. Eectrica Components Moduar Eectrica Components assemby: Structuray formed eectrica components tray made of ow copper auminum aoy 5052, back anodized finish. Provided with easy-ift hande for easy servicing. Too-ess access, quick reease detachabe assemby for repair and repacement without any downtime. Eectrica components, are UL recognized components and meet UL8750/UL1310/Cass-2 standards. Provided with suitabe dua fuse and fuse hoders rated 600V, high temperature body rated to 150-degree C. Tooess access for servicing. Designed for cooer operation and ong ife. Grounding Lug: Grounding ug sha be dua rated soder ess ground ug auminum aoy to accommodate wire size AWG #6 to 14. Termina Bock: One piece pug rated 600V insuation with non-conducting materia for AWG# 8 to 14. The bock is fixed mounted on the housing with separate ground ug to receive two circuit connections. Power Input connections: Choice of 6 cabe or 6 fexibe metaic watertight conduit using watertight fittings suppied with 12 AWG 3-conductors rated for 600V. Mounting Options Ceiing/wa or corner mount or suspended stem mount: Choice of fix mounting as down ight or adjustabe to aim up to +/- 45 degree aiming. Mounting brackets are 1/4 thick ow copper high strength auminum aoy 6061-T6. Optiona 10 gauge thick, 316 stainess stee brackets, are avaiabe. Suitabe dua uminaire mounting bracket design to meet project specifications. Safety Certifications Luminaire is Certified for ETL isted for USA and Canada per standards UL1598 3D Ed. Outdoor wet ocation and UL1598A marine ocations and CSA-22.2 NO Aso certified NEMA Type 4X, IEC EN60598 IP66. Lens: Cear 1/4 thick soda ime tempered gass impact resistant to rating IK08 as per ies EN Luminaire was vibration tested to meet 3G ratings as per ANSI C standards to perform in tunnes harsh environment. Wiring: Wires between LED modues and eectrica components are made of SF2 wires rated 600V, degree C. Wiring between eectrica components and quick disconnect termina (poarized nyon pug) is 16 AWG ETFE rated 600V, 9 amp, per circuit for wiring 2 poes for wires from LED drivers to LEDs and 3 poes from incoming ine to LED drivers. Moduar Component Tray Assemby 835 Industria Drive, Emhurst, IL

3 Tunne LED Targeted LED Performance Luminaire 25 C Samsung LM80 Projected Life Hours Per IESNA TM21-11 Mode LED Drive Current (ma) LED Coor Temp LED Watts Output Lumens At 25 C, At 40 C, At 50 C, TWL-S1 TWL-S2 TWL-S3 TWL-D2 TWL-D Industria Drive, Emhurst, IL

4 Tunne LED_Layout 1 10/10/14 2:44 PM Page 4 Tunne LED Photometry Summary: TWL-S2-W-5K-2RT (Recommended Appications: Transition/Interior Zones-Wide Tunnes) IES Cassification Longitudina Cassification Tota Lamp Lumens Luminaire Lumens Downward Tota Efficiency Tota Luminaire Efficiency Luminaire Efficacy Rating (LER) Tota Luminaire Watts Baast Factor Upward Waste Light Ratio (<90 Vert.) (At 90 Deg. Vert.) (80 to <90 Deg. Vert.) Cutoff Cassification (deprecated) Type II Short 305 (64 amps) % 89 % (2H, 35V) (2H, 35V) (0.0%Lamp) (1.3%Lamp) Cutoff Photometry Summary: TWL1-WHPS-H-ASYM (Recommended Appications: Threshod Zones-Wide Tunnes) IES Cassification Longitudina Cassification Tota Lamp Lumens Luminaire Lumens Downward Tota Efficiency Tota Luminaire Efficiency Luminaire Efficacy Rating (LER) Tota Luminaire Watts Baast Factor Upward Waste Light Ratio (<90 Vert.) (At 90 Deg. Vert.) (80 to <90 Deg. Vert.) Cutoff Cassification (deprecated) Type III Very Short 5 (1 amp) % 85 % (0H, 45V) (0H, 45V) 0 (0.0%Lamp) (0.6%Lamp) Fu Cutoff 835 Industria Drive, Emhurst, IL

5 Tunne LED Photometry Summary: TWL-S2-W-5K-4CBPB (Recommended Appications: Counter-Beam or Pro-Beam) IES Cassification Type II Longitudina Cassification Very Short 305 (64 amps) Tota Lamp Lumens Luminaire Lumens Downward Tota Efficiency 89 % Tota Luminaire Efficiency 89 % Luminaire Efficacy Rating (LER) 87 Tota Luminaire Watts Baast Factor 1.00 Upward Waste Light Ratio (10H, 50.5V) (<90 Vert.) (10H, 50.5V) (At 90 Deg. Vert.) (2.5%Lamp) (80 to <90 Deg. Vert.) (7.4%Lamp) Cutoff Cassification (deprecated) Semi-Cutoff Photometry Summary: TWL-S2-W-5K-5SQ (Recommended Appications: Transition/Interior Zones-Wide Tunnes) IES Cassification Type V-SQ Longitudina Cassification Very Short 305 (64 amps) Tota Lamp Lumens Luminaire Lumens Downward Tota Efficiency 89 % Tota Luminaire Efficiency 89 % Luminaire Efficacy Rating (LER) 87 Tota Luminaire Watts Baast Factor 1.00 Upward Waste Light Ratio N.A (180H, 41V) (<90 Vert.) (180H, 41V) (At 90 Deg. Vert.) (1.2%Lamp) (80 to <90 Deg. Vert.) (2.8%Lamp) Cutoff Cassification (deprecated) Cutoff 835 Industria Drive, Emhurst, IL