NOTCH 2 Symmetric - NT1-B. Luminaire NOTCH 2 - Area 100 Dn Symmetric (NT1-B) Type. Project. Product. Notes. Performance Summary

Transcription

1 T F W fluxwerx.com NOTCH 2 Symmetric - Specification Data Luminaire NOTCH 2 - Area 100 Dn Symmetric () Type Project Product Notes D2 - Drywall Trimless shown with (E) Dado Endcap option LED Product Partner specification Dw DYNAMIC WHITE 100 Down Symmetric A B C D Light (lm) Energy (W) Efficacy (lm/w) Color Rendering (CRI) Color Accuracy (SDCM) < 2 < 2 < 2 < 2 L70 Estimate (h) 200, , , ,000 Lumen Maintenance per TM21 60,000 h) L90 L90 L90 L90 Summary values are nominal and based on 4000K CCT. DLC -qualified for 5W/ft (A) & 6W/ft (B) in 4000 K only. NT1 B OPTIONS CONTROLS 1. FAMILY 2. VERSION 3. TRIM / CEILING 4. DISTRIBUTION 5. LIGHT + ENERGY 2 6. CCT NT1 Area 100 Dn L Linear Row P Pattern PATTERN 1 P0 Square P1 Rectangle P2 2-rows 1-corner P3 3-rows 2-corner P4 4-rows 3-corner P5 5-rows 4-corner D1 Drywall - Trim Flange D2 Drywall - Trimless D3 Drywall - Drop Radius D4 Drywall - Drop Square G1 Grid - 9/16" or 15/16" Flat-T G1 9/16" Tegular or Bolt-Slot G1 4" Armstrong TechZone or 4" USG Logix W2 Wall - Trimless B Symmetric A 500 lm + 5w/ft B 600 lm + 6w/ft C 700 lm w/ft D 900 lm + 9.5w/ft K K K W2 2700K-6500K 7. DRIVER 8. VOLTAGE 9. LENGTH 5 OPTIONS DYNAMIC WHITE CONTROLS 12 E1 eldoled ECO 0-10V Dim 1 E2 eldoled SOLO 0-10V Dim 0.1 E3 eldoled ECO DALI 1 E4 eldoled SOLO DALI Dim 0.1 F1 Factory Non- Dim F2 Factory 0-10V Dim 3 L1 Lutron Hi-Lume 1-H EcoSystem W1 eldoled DUAL DALI Dynamic White M V XX Drywall - Specify 1ft Increments V 4 XX Grid - Specify 2ft Increments LC L Corner (2 ft x 2ft) XN X intersection 3,6 TN T Intersection 3,6 CW Ceiling to Wall Transition 3,7 A Alternate Wiring (AV) 8 B Battery Pack 9 C Chicago Plenum E Dado Endcap 10 F 6' Flex Whip (Standalone Only) K Black Trim and Endcap M EM or NL (2nd neutral) 8 P Capsule Endcap 11 T Throughwire Circuit U Throughwire (w / neutral) WF1 Fluxwerx Wall Control WC1 0-10V Linear Dim WC2 0-10V Log Dim WD1 DALI Linear Dim WD2 DALI Inverse Log Dim NOTES 1 Other pattern options available. See page 4 and/or consult factory. 2 Add 1w/ft for 347V with E1-4/L1/W1 3 Single CCT versions only V Driver for F1/F2, 347 V Transformer & Driver for E1-4 L1/W1 5 Minimum is 2 feet 6 Available in D2 or W2 trim options. 7 Available in D2 trim option. Wall leg Light + Energy default is "A". Call factory for options. 8 Splits 8 foot section into 2 4-foot circuits. 9 Available for V in linear 4 or 8 foot. 10 Available with D2 trim option. Default option is to install in one end only. Call factory for options. 11 Available in D2, D3 and W2 trim options. 12 Refer to Dynamic White control options on page 2. 1 of 9

2 dynamic white controller DYNAMIC WHITE CONTROL OPTIONS fluxwerx wall controller Controls Protocol Control Curve Controls Brand Dynamic White Luminaire Code Controller Components * (ordered separately) DALI Linear Inverse Log FLUXWERX WF1 Fluxwerx Wall Controller e.g. Lutron, Crestron e.g. Distech, Helvar WD1 WD2 Controller supplied by others ON/OFF 100 brightness 0-10V Linear Log e.g. Leviton, Watt Stopper, Crestron, Pass & Seymour e.g. Lutron, Cooper Controls WC1 WC2 Controller Supplied by others Fluxwerx 0-10V converter per zone Scene buttons - Press + hold to save a scene. Press once to recall. * See Dynamic White controller data sheet 0.1 brightness Color Intensity 2 of 9

3 TRIM OPTIONS TRIM TRIMLESS DROP TRIM GRID D1 - Drywall Trim Flange D2 - Drywall Trimless D3 - Drywall Drop Radius G1-9/16" Grid Flat T OPTIONAL Dado Endcap D4 - Drywall Drop Square G1-15/16" Grid Flat T OPTIONAL Capsule Endcap OPTIONAL Capsule Endcap G1-9/16" Tegular Slot Grid NOTE: Use G1 for 4" Armstrong TechZone or 4" USG Logix Optical Anidolic optical system with linear light extraction elements Precision extruded high transmittance clear acrylic lenses Long life LED system designed for TM21 lumen maintenance 60,000 h Available in CCTs 3000 K, 3500 K, 4000 K, or K with CRI 80 and R9 0, all with color accurate binning 2 SDCM Construction 20 ga. satin coat steel housing Extruded aluminum flange options available for drywall trim, trimless and t-bar grid ceilings Electrical Integral high efficiency drivers V or 347 V; Hz Optional Battery Pack Optional flex whip: 6 prewired for standalone Surge Protection: Meets ANSI C82.11 spec and ANSI/IEEE C62.41 Inrush Current: Meets NEMA 410 Environmental Designed for use in damp or dry indoor environments with room side operating temperatures of 0-30 C (32-86 F) Warranty 5 year limited warranty on all components and workmanship Independent Testing IESNA LM79 IESNA LM80 (LED@ 10,000 h) Approvals UL Listed (USA + Canada) CCEA Chicago Plenum Lighting Facts IC Rated DesignLights Consortium 3 of 9

4 DIMENSIONS inches (mm) d1 d2 d3 + d4 drywall trim flange drywall trimless drywall drop trim (RADIUS/ SQUARE) 3.5" (88.9) 4" (101.6) 4.37" (111) 4.68" (119) 2.7" (67) Finished Dado Dimensions g1 g1 g1 15/16" 9/16" flat grid 9/16"bolt slot tegular grid 9/16" tegular 5.13" (130) 4.80" (122) 5.13" (130) 4.80" (122) 0.25" (6) 4.68" (119) 4.68" (119) 4.68" (119) 0.94" (24) 4" 0.56" (14) 4" (On Center) (On Center) (On Center) 0.56" (14) 4" Grid (g1) is compatible with 4" Armstrong TechZone and 4" USG Logix Ceiling Systems w2 wall - trimless cross section view 5.13" (130) 4.80" (122) 4 of 9

5 CONTINUOUS ROWS + STANDALONE FIXTURES Continuous rows are available in nominal 1 increments in drywall ceilings and in 2 increments on-grid for T-bar ceilings. Standalone fixtures are available in 2, 3, 4, or 8 sizes. 3' 4' 8' X INTERSECTING FIXTURES (drywall only) Note: Run lengths are nominal and vary with ceiling condition and trim selections. Intersecting sections can be used as standalone fixtures or combined with rows to create illuminated ceiling designs and patterns of light in limitless combinations. T-INTERSECTION (TN) - CEILING ONLY 45" CORNER (LC) - WALL OR CEILING X-INTERSECTION (XN) - CEILING ONLY CEILING TO WALL TRANSITION (CW) 20" 20" PATTERN EXAMPLES of 9

6 DRYWALL CUT OUT DIMENSIONS inches (mm) To determine the overall drywall ceiling cutout length, add an endcap allowance to each end of a straight run, or final leg of an open pattern, as follows: standard flat endcap (D1-D4) - 1/2 ; Capsule endcap - 1-3/4 ; Dado endcap - 3/16. For corner legs of a pattern, DO NOT add an endcap allowance. Instead, use centerline dimensions and the relevant cutout width for your trim to determine the opening. Example of a drywall cutout for a 17' run 0.5" (13) ENDCAP ALLOWANCE (See note above) 2 FT 4 FT 21.31" (541) 23.04" (585) 0.88" (22) 45.31" (1151) 47.04" (1195) *TYPICAL (8') (4') (3') () 9 (2394) 96" (2438) Length 1/4-20 THREADED ROD MOUNTING SLOT " (5147) 3 FT 8 FT 45.31" (1151) 47.04" (1195) 33.81" (859) 35.54" (903) 9 (2394) 96" (2438) 33.81" (859) 35.54" (903) ENDCAP ALLOWANCE (See note above) 21.31" (541) 23.04" (585) 0.5" (13) CORNER T - INTERSECTION X - INTERSECTION USE EITHER MOUNTING CORNER 22.56" (573) 21.73" (552) 22.56" (573) 0.88" (22) 20.75" (527) 22.56" (573) 0.88" (22) 43.46" (1104) 45.12" (1146) 21.73" (552) CW - INTERSECTION 20.22" (514) DIMENSION TO 1/4-20 THREADED ROD MOUNTING SLOT INSTALLATION NOTES: 43.46" (1104) 45.12" (1146) 20.22" (514) 19.35" (492) dimensions apply to all drywall trim options. For patterns, squares and rectangles, use centerline dimensions with trim cutout width to determine the opening. A minimum depth of 5" above ceiling plane or behind wall plane is required. Threaded rod or lag bolt mounting is required for ceiling installations only: - Ensure 1/4-20 threaded rod length is cut between 3.25" - above finished ceiling plane - 2 threaded rods required for each linear housing (3 for Corner and T's, 4 for X housing). 6 of 9

7 Light + Energy A lm w/ft Description Version A40 4ft luminaire 100 Dn A Report CCT 4000 K (lm) (W) (lm/w) (CRI) (R9) (SDCM) 4000 K < K < K < 2 CANDLEPOWER DISTRIBUTION LUMEN SUMMARY LUMINANCE DATA (CD/M 2 ) 100 Dn Horizontal Angle Angle Zonal Total Luminaire Zone Lamp CO-EFFICIENTS OF UTILIZATION Fixture N.A N.A N.A N.A N.A. 100 Angle Floor 20 Ceiling Wall Integrating Sphere and Photometric results at 4000K by an independent accredited testing laboratory per IES LM and ANSI C Results for 3000K, 3500K scaled based on integrating sphere results at 38W (D). Candlepower Distribution scaled per total lumens of Integrating Sphere results. Light + Energy B lm w/ft Description Version B40 4ft luminaire 100 Dn, B Report CCT 4000 K (lm) (W) (lm/w) (CRI) (R9) (SDCM) 4000 K < K < K < 2 CANDLEPOWER DISTRIBUTION LUMEN SUMMARY LUMINANCE DATA (CD/M 2 ) 100 Dn Horizontal Angle Angle Zonal Total Luminaire Zone Lamp CO-EFFICIENTS OF UTILIZATION Fixture N.A N.A N.A N.A N.A. 100 Angle Floor 20 Ceiling Wall of 9

8 Light + Energy C lm w/ft Description Version C40 4ft luminaire 100 Dn, C Report CCT 4000 K (lm) (W) (lm/w) (CRI) (R9) (SDCM) 4000 K < K < K < 2 CANDLEPOWER DISTRIBUTION LUMEN SUMMARY LUMINANCE DATA (CD/M 2 ) 100 Dn Horizontal Angle Angle Zonal Total Luminaire Zone Lamp CO-EFFICIENTS OF UTILIZATION Fixture N.A N.A N.A N.A N.A. 100 Angle Floor 20 Ceiling Wall Integrating Sphere and Photometric results at 4000K by an independent accredited testing laboratory per IES LM and ANSI C Results for 3000K, 3500K scaled based on integrating sphere results at 38W (D). Candlepower Distribution scaled per total lumens of Integrating Sphere results. Light + Energy D lm + 9.5w/ft Description Version D40 4ft luminaire 100 Dn, D Report CCT 4000 K (lm) (W) (lm/w) (CRI) (R9) (SDCM) 4000 K < K < K < 2 CANDLEPOWER DISTRIBUTION LUMEN SUMMARY LUMINANCE DATA (CD/M 2 ) 100 Dn Horizontal Angle Angle Zonal Total Luminaire Zone Lamp CO-EFFICIENTS OF UTILIZATION Fixture N.A N.A N.A N.A N.A. 100 Angle Floor 20 Ceiling Wall of 9

9 Product Notch 2 - Area Description Version Report AW2 FLUXWERX 4ft luminare 100 Dn A lumens CCT K (lm) (W) (lm/w) (CRI) (R9) 2700 K K K K K K Product Notch 2 - Area Description Version Report BW2 FLUXWERX 4ft luminare 100 Dn B lumens CCT K (lm) (W) (lm/w) (CRI) (R9) 2700 K K K K K K Integrating Sphere and Photometric results scaled from, PF1-B and PF1-A Dynamic White results from independent accredited testing laboratory per IES LM and ANSI C Candlepower Distribution scaled per total lumens of Integrating Sphere results. Product Notch 2 - Area Description Version Report CW2 FLUXWERX 4ft luminare 100 Dn C lumens CCT K (lm) (W) (lm/w) (CRI) (R9) 2700 K K K K K K of 9