003 3 foot foot RUN Nominal Length* * For actual lengths see

Size: px

Start display at page:

Download "003 3 foot foot RUN Nominal Length* * For actual lengths see"

Maria Gordon
5 years ago
Views:

M125 Project: Type: Qty: Series Lamping Shielding Mounting Nominal Length Finish Voltage Options Series Lamping Shielding Mounting Nominal Length Finish Voltage Options M125 (M125/9 Direct)

1 M125 Project: Type: Qty: Series Lamping Shielding Mounting Nominal Length Finish Voltage Options Series Lamping Shielding Mounting Nominal Length Finish Voltage Options M125 (M125/9 Direct) Multi-Mount Form M125-1T5-F T5 2T5 1T8 2T8 1T5HO 2T5HO 9 F RS 2 TS W Surface Mount Rigid Stem 1 Studs (Factory installed) Wall Mount 3 3 foot 4 4 foot RUN Nominal Length* * For actual lengths see p.6. For other lengths, configurations indicate nominal length rounded to the next highest foot. Factory will supply layout drawings. Individual fixtures cannot be field joined. 1. Housing - Continuous, 663- T6 extruded aluminum profile up to 4 feet long. Die cast aluminum end caps. Housing end caps made from low copper, marine grade alluminum alloy. Two watertight nipple connectors join fixtures in run configurations. See p. 6 for details. 2. Ballast - Electronic, high power factor, class "P," type sound rating. Specify 12V, 277V, or 347V. Ballast is factory prewired with leads to one end of fixture. Cold Weather ballast (-2 F/-29 C) available with CW option. See page 1 for standard dimming ballasts. 3. EM Battery Packs - (Not Shown) Standard EM Battery Packs (EM1 - EM3) by IOTA TM. For detailed information (i.e. operated lamps and average lumen ratings) please see IOTA TM Product specification sheet. 4. Gear Tray - White powdercoated, cold-rolled steel. Gear tray installed as a complete electrical unit fully accessible and removable from below ceiling. WH White BK Black SV Silver SP Specify Premium Color 1 IK1 rated 2 Only available with Media Trunking (MT) 3 Not available with T5HO 4 Not available with 347V 5 Not available with 2T5HO 6 Not available as surface mount 7 Not required when MT is used 8 Surface, Wall, and 1 Stud mount only /16" (125mm) M125-1T5-RS-MT 1 7 /16" (37mm) 3 7 /16" (88mm) TEL (845) FAX (845) M125-F (ss-v3.8) XX SI OI Clear Glass only Clear Glass w/ Satine Inlay Clear Glass w/ Opal Inlay MI Clear Glass w/ Microprismatic Inlay PC 1 Prismatic Lens SD 1 Satine Lens Union Made Affiliated with IBEW Local /2" (9mm) 4 15 /16" (125mm) NRTL Listed for Wet Locations (i.e. UL, CSA) IP65 IK1 1 Studs Wall Mount Lamps - Single or double T5 (21W 3, 28W 4 ), T5HO (39W 3, 54W 4 ), or T8 (25W 3, 32W 4 ) lamping by others. 6. Shielding - Choice of 4mm satine or clear polycarbonate prismatic lenses (IK1 with polycarbonate or satine lenses only); or tempered clear glass with optional satine, opal, or microprismatic inlays available. 7. Grommet - Rubber Grommet in 3/16 feed hole provided for feed wire. 8. One piece Silicone Gasketing - Fixture lens and end plates are fully gasketed (IP65 rated) for weather proofing, dust, and insect control. 9. Mounting Screws - With 1/4 sealing washers, screws provided by others. 1. Fixture Door - Secure, completely sealed at all points of entry from water, insects and dust. Two stainless steel tamper-proof screws allow access to lamp and gear tray. Door remains captive when Complies with A D A Americans with Disabilities Act MT 6 Media Trunking EM1 3,4,5 Stand-by Battery Pack (ISL-28) EM2 4,5 Stand-by Battery Pack (ISL-54) EM3 4,5 Stand-by Battery Pack (ISL-54) DM Non-Standard Ballast DMA 4,5 Lutron: EcoSystem (4-wire Digital Link) DMH 5 Lutron: EcoSystem H-Series Dimming (4-wire Digital Link) DM3 4,5 Lutron: Hi-Lume 3D (3-wire) DM4 4,5 Lutron: Hi-Lume 3D (4-wire Digital Link) DM7 4,5 Advance: Mark 7 (-1v) Dimming DM1 4,5 Advance: Mark 1 (2-Wire) Dimming TM Separate Switching (consult factory) EC Emergency Wiring (consult factory) FS 4 Single Fusing CW Cold Weather Ballast NC 7 Nipple Connector (RUN only) EFC 8 End Feed with Watertight connection for 1 /2 conduit ( 1 /2 conduit by others) servicing with corrosion protected steel safety cable on both ends. 11. Media Trunk - Provides raceway for additional cables, etc. Required for Rigid Stem (RS) mountings, continuous run or pattern applications. See p. 5 for details " Steel Rigid Stem Suspension - 48" maximum standard suspension from ceiling to top of luminaire. Stem and Canopy are white. 13. Nipple Connector - (not shown) 3/8" IP nipple connector for water tight connection between luminaires in a run. Two connectors required per connection. Not required when MT is used. For details see p Ø1/4" Threaded Rod - 1/4-2 stud only. Couplers & Rod by others. 15. Emergency Battery Pack - (not shown) For details, see p. 9. Luminaire Finish - Selux utilizes a high quality Polyester Powder Coating. All Selux luminaires and poles are finished in our Tiger Drylac certified facility and undergo a five stage intensive pretreatment process where product is thoroughly cleaned, phosphated and sealed. Selux powder coated products provide excellent salt and humidity resistance as well as ultra violet resistance for color retention. All products are tested in accordance with test specifications for coatings from ASTM and PCI. Selux premium colors (SP) are available, please specify from your Selux color selection guide. In a continuing effort to offer the best product possible, we reserve the right to change, without notice, specifications or materials that in our opinion will not alter the

2 Photometry M125-1T5-SI Satine Inlay/Clear Lens COEFFICIENTS OF UTILIZATION - Zonal cavity method Catalog #: M125-1T5-SI-F-4 Lamp: 29 initial lumens Report #: Luminaire Lumens: 2112 Luminaire Efficiency: 73% Maximum Candela: DOWNLOAD IES FILE: Vertical Plane is parallel with the lamp. 9 Vertical Plane is perpendicular to the lamp. ZONAL LUMEN SUMMARY ZONE LUMENS %LAMP %FIXT M125-2T5-SI Satine Inlay/Clear Lens COEFFICIENTS OF UTILIZATION - Zonal cavity method Catalog #: M125-2T5-SI-F-4 Lamp: 29 initial lumens Report #: Luminaire Lumens: 4224 Luminaire Efficiency: 73% Maximum Candela: 8.5 DOWNLOAD IES FILE: Vertical Plane is parallel with the lamp. 9 Vertical Plane is perpendicular to the lamp. ZONAL LUMEN SUMMARY ZONE LUMENS %LAMP %FIXT M125-F (ss-v3.8)

3 Photometry (cont d) M125-1T8-MI Microprismatic Inlay / Clear Lens Catalog #: M125-1T8-MI-F-4 Lamp: 3 initial lumens Report #: 43 / SX545AA6(*) Luminaire Lumens: 238 Luminaire Efficiency: 64% Maximum Candela: DOWNLOAD IES FILE: M125-1T8-PC Prismatic Lens Catalog #: M125-1T8-PC-F-4 Lamp: 3 initial lumens Report #: 429 / SX545AA5(*) Luminaire Lumens: 2563 Luminaire Efficiency: 83% Maximum Candela: DOWNLOAD IES FILE: COEFFICIENTS OF UTILIZATION - Zonal cavity method RC RW Vertical Plane is parallel with the lamp. 9 Vertical Plane is perpendicular to the lamp. Effective Floor Cavity Reflectance.2 ZONAL LUMEN SUMMARY ZONE LUMENS %LAMP %FIXT COEFFICIENTS OF UTILIZATION - Zonal cavity method Vertical Plane is parallel with the lamp. 9 Vertical Plane is perpendicular to the lamp. ZONAL LUMEN SUMMARY ZONE LUMENS %LAMP %FIXT M125-1T8-XX Tempered Clear Lens Catalog #: M125-1T8-XX-F-4 Lamp: 3 initial lumens Report #: 431 / SX545AA7(*) Luminaire Lumens: 2268 Luminaire Efficiency: 73% Maximum Candela: DOWNLOAD IES FILE: COEFFICIENTS OF UTILIZATION - Zonal cavity method RC RW Vertical Plane is parallel with the lamp. 9 Vertical Plane is perpendicular to the lamp. Effective Floor Cavity Reflectance.2 ZONAL LUMEN SUMMARY ZONE LUMENS %LAMP %FIXT M125-F (ss-v3.8)

4 Individual Surface (F) Mounting Details Mounting hardware by others. Outlet box and lamp(s) by others. 4 fixture shown as reference. M125-xxxx-xx-xx- F -4-xx-xx 2 5/16" [58mm] Ø13/16" [Ø21mm] Feed Hole, Fixture supplied with a 6" feed cord and water tight grommet Std. ** For "F" mount, the grommet can be replaced with a 1/2" (13mm) chase nipple for a water-tight connection to the J-Box in the field by others. M125 - SURFACE (F) MOUNT 3 3/4" [95mm] MOUNTING SURFACE TOP 2 5/8" [67mm] (4x) Clearance holes for 1/4" mounting hardware* Sealing washers supplied by Selux, to be installed in the field ( *1/4" mounting hardware supplied and installed to code(s) in the field by others.) 1T8 SHOWN Feed location 1 1/2" [38mm] 3 3/4" [96mm] Shielding M125-xxxx-xx-xx- TS-4-xx-xx 2 5/16" [58mm] Feed Hole, Fixture supplied with a 6" feed cord and water tight grommet Std. M125-1/4-2 THREADED ROD (TS) MOUNT TOP (2x) 1" 1/4-2 Studs (Pre-Installed at Selux) 2T5 SHOWN 2 5/8" [67mm] Feed location 1 1/2" [38mm] 3 3/4" [96mm] Shielding 3 foot individual 4 foot individual SURFACE (F) AND THREADED STUD (TS) MOUNTING DIMENSIONS T5 T8 HOUSING LENGTH SUSPENSION HOUSING LENGTH SUSPENSION 3' - 1" [94mm] 2' /16" [656mm] 3' /16" [985mm] 2' - 3 5/8" [71mm] 4' - 13/16" [124mm] 3' - 1 5/8" [956mm] 4' /16" [129mm] 3' - 3 5/8" [6mm] For other lengths, lamping, continuous runs or configurations please specify overall length (in feet), accessories desired and sketch/drawing of configuration. Selux will detail project drawings upon order and supply submittal drawings for approval. If you have any questions, contact Selux customer service or applications engineering for assistance (1-8-SELUX-CS). M125-F (ss-v3.8)

5 M125 Transit Tunnel Individual Wall (W) Mounting Details Mounting hardware by others. Outlet box and lamp(s) by others. 4 fixture shown as reference. M125-xxxx-xx-xx- W -4-xx-xx (2x) Wall Mounting Brackets TOP Feed Location Fixture supplied with a 6" feed cord and water tight grommet Std. 1 1/2" [38mm] 3 3/4" [96mm] Shielding M125 - WALL (W) MOUNT FEED CORD 1 7/8" [48mm] Mounting Plate detail 3 3/4" [95mm] 1 1/2" [38mm] 3/4" [19mm] 3 9/16" [9mm] 1T8 SHOWN 7 7/16" [188mm] 2 1/2" [63mm] 5" [127mm] (4x) Clearance holes for 1/4" mounting hardware Hardware supplied and installed to code(s) in the field by others. WALL (W) MOUNTING DIMENSIONS T5 HOUSING LENGTH SUSPENSION T8 HOUSING LENGTH SUSPENSION 3 foot individual 3' - 1" [94mm] 2' /16" [656mm] 3' /16" [985mm] 2' - 3 5/8" [71mm] 4 foot individual 4' - 13/16" [124mm] 3' - 1 5/8" [956mm] 4' /16" [129mm] 3' - 3 5/8" [6mm] For other lengths, lamping, continuous runs or configurations please specify overall length (in feet), accessories desired and sketch/drawing of configuration. Selux will detail project drawings upon order and supply submittal drawings for approval. If you have any questions, contact Selux customer service or applications engineering for assistance (1-8-SELUX-CS). M125-F (ss-v3.8)

6 Linear Run Mounting Details Nipple Connectors provide waterproof wiring between fixtures, connected in the field. Mounting hardware by others. Outlet box and lamp(s) by others. For custom configurations and lengths, please consult factory. M125-xxxx-xx-xx- F -6-xx-xx-NC [286mm] Feed location M125-xxxx-xx-xx- F -8-xx-xx-NC Feed location "C" [286mm] "C" 4 FOOT 4 FOOT M125-xxxx-xx-xx- F -9-xx-xx-NC Feed location [286mm] [286mm] M125-xxxx-xx-xx- F -1-xx-xx-NC Feed location [286mm] "C" 4 FOOT [286mm] M125-xxxx-xx-xx- F -12-xx-xx-NC Feed location "C" [286mm] "C" [286mm] "C" 4 FOOT 4 FOOT 4 FOOT 6 foot run 8 foot run 9 foot run 1 foot run 12 foot run SURFACE (F), THREADED STUD (TS) AND WALL (W) MOUNTING DIMENSIONS T5 T8 HOUSING LENGTH SUSPENSION "C" SUSPENSION HOUSING LENGTH SUSPENSION "C" SUSPENSION 6' - 2 1/8" [1882mm] 2' /16" [656mm] 6' - 5 5/8" [1972mm] 2' - 3 5/8" [71mm] 8' /16" [2482mm] 3' - 1 5/8" [956mm] 8' - 5 5/8" [2582mm] 3' - 3 5/8" [6mm] 9' - 3 3/16" [2824mm] 2' /16" [656mm] 9' - 8 1/2" [2959mm] 2' - 3 5/8" [71mm] 1' - 3" [3124mm] 2' /16" [656mm] 3' - 1 5/8" [956mm] 1' - 8 1/2" [3264mm] 2' - 3 5/8" [71mm] 3' - 3 5/8" [6mm] 12' - 2 5/8" [3724mm] 3' - 1 5/8" [956mm] 12' - 8 1/2" [3874mm] 3' - 3 5/8" [6mm] For other lengths, lamping, continuous runs or configurations please specify overall length (in feet), accessories desired and sketch/drawing of configuration. Selux will detail project drawings upon order and supply submittal drawings for approval. If you have any questions, contact Selux customer service or applications engineering for assistance (1-8-SELUX-CS). M125-F (ss-v3.8)

7 Individual Rigid Stem (RS) Mounting Details Mounting hardware by others. Outlet box and lamp(s) by others. 4 fixture shown as reference. M125-xxxx-xx-xx- RS -4-xx-xx-MT M125 - RIGID STEM MOUNT (RS) MOUNT (REQUIRES MEDIA TRUNK) 48" [1219mm] MOUNTING SURFACE Feed Location Fixture supplied with a 6" feed cord and water tight grommet Std. 1 1/2" [38mm] White stem and canopy FEED CORD Black 3 3/4" [96mm] Shielding 2T5 SHOWN RIGID STEM (RS) WITH MEDIA TRUNK (MT) MOUNTING DIMENSIONS T5 HOUSING LENGTH SUSPENSION T8 HOUSING LENGTH SUSPENSION 3 foot individual 3' - 1" [94mm] 2' /16" [656mm] 3' /16" [985mm] 2' - 3 5/8" [71mm] 4 foot individual 4' - 13/16" [124mm] 3' - 1 5/8" [956mm] 4' /16" [129mm] 3' - 3 5/8" [6mm] For other lengths, lamping, continuous runs or configurations please specify overall length (in feet), accessories desired and sketch/drawing of configuration. Selux will detail project drawings upon order and supply submittal drawings for approval. If you have any questions, contact Selux customer service or applications engineering for assistance (1-8-SELUX-CS). M125-F (ss-v3.8)

8 Linear Run Mounting Details Media Trunk (MT) required for all Rigid Stem (RS) linear run configurations. Nipple connectors (NC) are not needed when Media Trunking (MT) is used. Mounting hardware by others. Outlet box and lamp(s) by others. For custom configurations and lengths, please consult factory. M125-xxxx-xx-xx- RS -6-xx-xx-MT M125-xxxx-xx-xx- RS -8-xx-xx-MT 4 FOOT 4 FOOT M125-xxxx-xx-xx- RS -9-xx-xx-MT M125-xxxx-xx-xx- RS -1-xx-xx-MT 4 FOOT M125-xxxx-xx-xx- RS -12-xx-xx-MT 4 FOOT 4 FOOT 4 FOOT 6 foot run 8 foot run 9 foot run 1 foot run 12 foot run RIGID STEM (RS) WITH MEDIA TRUNK (MT) MOUNTING DIMENSIONS T5 T8 HOUSING LENGTH SUSPENSION HOUSING LENGTH 6' - 2 1/8" [1882mm] 2' - 7 7/16" [799mm] 6' - 5 5/8" [1972mm] 8' /16" [2482mm] 3' - 7 1/4" [199mm] 8' - 5 5/8" [2582mm] 9' - 3 3/16" [2824mm] 4' - 2" [127mm] 9' - 8 1/2" [2959mm] 1' - 3" [3124mm] 4' /16" [142mm] 1' - 8 1/2" [3264mm] 12' - 2 5/8" [3724mm] 5' - 7 3/4" [172mm] 12' - 8 1/2" [3874mm] SUSPENSION 2' - 9 1/4" [844mm] 3' - 9 1/4" [1149mm] 4' - 4 5/8" [1338mm] 4' - 1 5/8" [149mm] 5' - 1 5/8" [1795mm] For other lengths, lamping, continuous runs or configurations please specify overall length (in feet), accessories desired and sketch/drawing of configuration. Selux will detail project drawings upon order and supply submittal drawings for approval. If you have any questions, contact Selux customer service or applications engineering for assistance (1-8-SELUX-CS). M125-F (ss-v3.8)

9 Mounting Details Nipple Connectors Water-tight Nipple Connectors supplied for all run configurations. Nipple Connectors are not needed when Media Trunking (MT) is used. M125-F (ss-v3.8)

10 Dimming Option Details Dimming Lamping Voltage Manufacturers: Standard Ballast T5 T5HO T8 12V 14W 54W 17W DM7 (-1V) Advance : Mark 7 21W 25W 277V 8W 28W 32W 14W 24W 17W 12V DMH Digital Link (4-wire) 21W 39W 25W 28W 54W 32W 277V Lutron : EcoSystem H-Series 28W 54W 32W 347V DM4 Digital Link (4-wire) 14W 24W 17W 12V 21W 39W 25W 54W 28W 32W 277V 8W Lutron : Hi-Lume 3D DM3(3-wire Dim) 14W 24W 17W 12V 21W 39W 25W 54W 28W 32W 277V 8W Lutron: Hi-Lume 3D DMA 14W 24W 17W 12V 21W 39W 25W 54W 28W 32W 277V 8W Lutron : EcoSystem 24W 17W 12V DM 1 (2-wire) 25W Advance: Mark 1 54W 277V 32W DM ( Non-Standard Driver) Please specify Lamping Please specify manufacturer and model number EM Stand-by Battery Packs Selux only uses name-brand, UL-listed fluorescent EM ballasts that in the event of a power failure, operates one of the existing lamps for 9 minutes. Comes with original manufacturer 5-year warranty. For wiring and maintenence information, please consult factory. End View 1.2 (3mm) 1.2 (29mm) Side View Mounting Points EM1 EM2 EM3 Lumen Output 5 Lm (1 lamp) 825 Lm (1 lamp) 13 Lm (1 lamp) Lamps Operated Most 2-4 T5, up to 28W or T8 linear flourescent lamps Most 2-4 T5, 17-4W T8, and most HO linear flourescent lamps Most 2 4 T5, up to 28W or T8 linear flourescent lamps Operation Time 9 min. 9 min. 9 min. Input Voltage 12/277V, 6Hz 12/277V 6Hz 12/277V 6Hz Average Lumen Ratings 21W T W T W T5HO n/a W T5HO n/a F25 T F28 T F32 T M125-F (ss-v3.8)

Qty: B B lm/6.9W per foot. per foot. 2B lm/15.3W per foot. 2B lm/13.

Qty: B B lm/6.9W per foot. per foot. 2B lm/15.3W per foot. 2B lm/13. Date: Customer: Project: Type: Qty: M125 Order Code: L125 - - - - - - - - - - - - L125 Series L125 M125 Multi-Mount Form Light Engine 1B45 1,2 1116lm/11.9W 1B40 1 1B35 1 1009lm/10.6W 888lm/9.3W 1B30 1