Maxline Profile System - Suspension

Transcription

1 DIRECT 5 7/8 150mm 6 1/4 158mm L3ML-SUS-SYS DR Article # Distribution Diffuser Length Angle Voltage Linear Spot Electrical Power Suspension Finishes Couplers Feed Cable x / / Accessories Product Distribution Diffuser Length Angle Couplers Voltage L3M L-SUS-SYS DR -Direct OP - Opal State (If required) 120V Linear Spots Max Line (linear only) length FC - Surface V DN - Non-dimming ( For ) Suspension AC -AluminumCap Specify custom L306 - (3000K) L12 - (2700K) 24W DV V Dimming (For ) (for spots) 347V L356 - (3500K) L13 - (3000K) 24W (Optional) L406 - (4000K) L14 - (4000K) 24W SO - Standard Output Non-dimm. L22 - (2700K) 17W HO - High Output Non-dimm. L23 - (3000K) 17W DIM1-0-10V S2 - T5 SO 2 lamp L24 - (4000K) 17W DIME - Lutron Eco System (10%) Inserts H2 - T5 HO 2 lamp DIME3 - Lutron Eco System3 Wire (10%) DIM3D - Lutron Hi-Lume 3D (1%) DIM3D3 - Lutron Hi-Lume 3 Wire (1%) Other: Please specify DIMEH - Lutron Eco System H Series (1%) EM -Emergency Other: Please specify Electrical Options Power Feed Suspension Cable Finishes (see page 5) Accessories Standard Colored Standard Cable (Pair) Please specify profile/end cap/suspension cable. Fluorescent Gels 1S3-3WIRE 1C3-3WIRE 2M mm height 00 Natural Anodized Aluminum 13 Mysterious Gray R-Red 1S4-4WIRE 1C4-4WIRE 6M mm height 01 Sparkling Silver 14 Twilight Y-Yellow 1S5-5WIRE 1C5-5WIRE Y- Cable (Pair) 02 Black Velvet 15 Lost Dream G - Green 2S3-3WIRE 2C3-3WIRE 2MY mm height 03 Crystal White 16 Purple Sky B-Blue 2S4-4WIRE 2C4-4WIRE 6MY mm height 04 Creamy 17 Fresh Oh P -Pink 2S5-5WIRE 2C5-5WIRE 05 Hampton Bay 18 Funky P. Pp - Purple 06 Lagoon 19 Kissing Aphrodite O-Orange 07 Urban Forest 20 Poseidon's Paradise 08 In the Army 21 Blue Sky 09 Rusty Angel 22 Spring Green 10 Rusty Rush 23 Mellow Yellow 11 Milk & Chocolate 24 Golden Heart 12 Fade to Gray 25 Gun Metal For unique customized profiles please include a layout drawing or description below; Include detailed information such as distance between linear lamps, spots and aluminum caps. Zaneen will supply submittal drawing for approval once a Purchase Order is received. Spot colors and reflectors can be customized by adding suffix to the codes (See page 3). Spots can go only with aluminum cap. Power Feed length, canopy color and cable color can be customized by adding suffix to the codes. (See page 4) Profile Layout Suggestions Available for International specifications by adding 'INT' at the end of the existing Model #. International spec sheets are available upon request. For assistance to write your custom specification, your inquiry to: specification@zaneen.com. You will receive a response within 1-2 business days. Page 1 of 7

2 Type Suspension Rated for Dry or Damp locations (Ip20) Approval Certified by C.S.A. for North American Standards Emission Direct. Efficiency Acrylic diffuser (snap-in) lens 43% PROFILE Measurements w. 158mm x ht. 150mm (6 1/4" x ht. 5 7/8") Housing Anodized extruded aluminum profile up to /16 long. Profiles are joined with a coupler to ensure uniform appearance and easy installation. Extruded aluminum offers high reflective surface and excellent heat dissipation. Corners 100% homogeneous appearance. 90 degree and custom angles ( degree) are available. Corners are created with mitered cut in lens and aluminum. End Cap has no visible screws. Finishes Standard; Natural anodized aluminum Optional; 24 colors offered using premium powder coated finish. Profile, end caps and suspension cables can be specified in different finishes. Suspension Cable 1/16 aircraft cable supplied with chrome gripper. Maximum suspension from ceiling to top of the fixture is 6m. Maximum space between aircraft suspension cables is 1.8m. INSERTS AR 3000K (6.2W/ 880 lm/ft) 3500K (6.2W/ 890 lm/ft) 4000K (6.2W/ 902 lm/ft) (LM 79-80) inserts are offered in 12", 23", 34"... increments to 7 5 Max. Zaneen will finalize the actual profile length after calculating the inserts required. Please contact Zaneen for other color temperature options. Available Configurations 2 lamp overlap T5 SO: 21W, 28W, 35W / T5 HO: 39W, 54W Emergency 2 lamp overlap T5 SO: 21W, 28W, 35W / T5 HO: 39W, 54W SPOTS 17W Spot (2700K, 1800lm / 3000K, 2000lm / 4000K, 2210lm) Offered in 4 reflector choices (12, 24, 40 and 58 ) also 25 color options for lamp ring and frame. This spot is adjustable: Rotational 180 and Tilt ±30 24W Spot (2700K, 2490lm / 3000K, 2650lm / 4000K, 2935lm) Offered in 3 reflector choices (12, 24 and 40 ) also 25 color options for reflector color. ELECTRICAL Luminaires are pre-wired with a factory installed branch circuit wiring and quick-release connectors. Through wiring is used to connect the luminaires. Power Feed 9mm diameter hole located on top of profile. Strain relief is positioned over the power feed hole. Driver: All drivers for this fixture are onboard but in case of remote requirement the driver must be installed into a metal enclosure (supplied by others). Maximum distance between the power supply and the last fixture on the circuit is 30' using a 18- gauge wire. For more than 30', the gauge of the wire must be determined by a certified professional. The length of the fixture specified must be considered within the maximum distance of 30'. Provisions must be made on site for accessibility to the power supplies. Electronic Class II driver, 120V/ 277V/ 347V(optional). Dimming driver 0-10V (10-100%) Lutron Hi-Lume A type dimming Emergency Inverter Compatible To be installed remotely but provided by others, can be located up to 250 away from the fixture. Emergency Circuit Wiring Upon request. Fluorescent Ballast Electronic high-power factor ballast. Specify 120V, 277V, 347V. Ballast is pre-wired with leads to one end of fixture. Ballast is positioned behind the lamp insert and is fully accessible from below. 0-10V, Lutron 3-wire or Lutron digital dimming options are available. Lutron dimming ballast is used as standard 120V/ 277V/ 347V. Emergency Ballast To be installed remotely. Suspension cable length must be maximum 2. Emergency Circuit Wiring Upon request. Emergency Testing Switch is installed on the side of the emergency ballast equipped fixture. WARRANTY Zaneen provides a limited warranty from date of purchase to original purchaser. Inserts : 5 year Rated for 50,000 hours at 70% lumen output (L70) Driver : 5 year Fluorescent Ballast : 5 year Dimming Ballast : 3 year 12V Transformer : 1 year Electronic Metal Halide Ballast : 1 year Non-Electrical Components : 1 year Page 2 of 7

3 Maxline Profile System - Suspension INSERTS AR INSERTS Color Temp. (K) Watt Nominal Lumen Length L K 6.2W / ft 880 lm/ft L K 6.2W / ft 890 lm/ft L K 6.2W / ft 902 lm/ft driver included 12" / 23 /... / 7 5" 300 / 580 /... / 2270mm Overlap 12" / 23 /... / 7 5" 300 / 580 /... / 2270mm Lamp Insert Position S2 H2 Standard Output T5: 14W, 21W, 28W, 35W High Output T5: 24W, 39W, 54W 2-Lamp 3 1/8 / 80mm Emergency: Standard Output T5: 21W, 28W, 35W High Output T5: 24W, 39W, 54W 2 15/16 / 75mm SPOT INSERTS 1 Code Color Temp. (K) Wattage Voltage Lumen CRI Features Reflector Opt. Dimensions L12 - L13 - L K 3000 K 4000 K 24W 24W 24W 120Vac 2490lm 2650lm 2935lm 300mm (11 13/16") driver included To complete the above codes add suffix according to the example REFLECTOR ORDER-EXAMPLE: L for finishes 12 2 Code Color Temp. (K) Wattage Voltage Lumen CRI Features Reflector Opt. Dimensions L22 - L23 - L K 3000 K 4000 K 17W 17W 17W 120Vac 1800lm 2000lm 2210lm Tilt Rotational ± mm (13 3/4") driver included To complete the above codes add suffix according to the example REFLECTOR ORDER-EXAMPLE: L for finishes 12 Zaneen reserves the right to change the specifications and/or materials without notice. Please check for the most recent updates. Page 3 of 7

4 ELECTRICAL OPTIONS DRIVERS Dimmable Max. Wattage Voltage Dimensions (mm/inch) DV DN 0-10V dimming Non-dimming 100W 100W V / 24Vdc 347V (Optional) L.318x W.102x H.50.8mm /L.12 1/2 x W.4 x H.2 DIM3 Lutron Hi-Lume A Series 40W Drivers will be installed remotely and have to be placed in the enclosure provided by others V / 24Vdc L.318x W.102x H.50.8mm /L.12 1/2 x W.4 x H.2 BALLASTS Non-Dimm/Dimmable T5SO /Wattages T5HO /Wattages Voltage Dimensions (mm/inch) S H Standard Output non-dimm High Output non-dimm W V-277V 347V (Optional) INTEGRAL DIM1 DIME DIME3 DIM3D DIM3D3 DIMEH 0-10V dimming Lutron Eco System(10%) Lutron Eco System 3 wire (10%) Lutron Hi-Lume 3D (1%) Lutron Hi-Lume 3 wire (1%) Lutron Eco System H series (1%) W W 54W 120V-277V 347V (Optional) INTEGRAL EM Emergency 90 minutes operation W 39-54W 120V-277V L.571.5x W.30x H.30mm /L.22 1/4 x W.1 3/16 x H.1 3/16 COMPONENTS Code Aluminum Profile max. 3000mm lengths Corner Coupler Required Angle Diffuser max. 3000mm lengths Suspension Cable (pair) 2M 6M 2000mm 6000mm End Cap Y-Suspension Cable (pair) 2MY 6MY 2000mm 6000mm Coupler Corner Coupler 90 Power Feed Colored Power Feed 2C3-2C4-2C5-6C3-6C4-6C5-2C3-2C4-2C5-6C3-6C4-6C5 - CABLE COLOR 2000mm - 3 wire 2000mm - 4 wire 2000mm - 5 wire 6000mm - 3 wire 6000mm - 4 wire 6000mm - 5 wire 2000mm - 3 wire 2000mm - 4 wire 2000mm - 5 wire 6000mm - 3 wire 6000mm - 4 wire 6000mm - 5 wire ORDER-EXAMPLE: 6C white orange red for finishes red Page 4 of 7

5 Color Choices: natural anodized aluminum sparkling silver RAL9006FS velvet RAL9005FS crystal white RAL 9016FS creamy hampton bay lagoon urban forest in the army rusty angel rusty rush milk & chocolate fade to gray mysterious gray twilight lost dream purple sky fresh Oh funky P. kissing aphrodite poseidon s paradise blue sky spring green mellow yellow golden heart gun metal 00 Standard Finish: natural anodized aluminum Color Finishes: additional charge ADDITIONAL NOTES Page 5 of 7

6 WIRING DIAGRAMS FOR AR 0-10V DIMMING / 0-10V DRIVER 0-10Vdc 24Vdc GRAY PURPLE BLUE DIMMER Zaneen recommends Diva 0-10V (DVTV) dimmer. This diagram applies only to Diva 0-10V (DVTV) dimmer. LIGHT ENGINE LUTRON ECO SYSTEM DIGITAL DIMMING GROUND GREEN HI-LUME A SERIES LIGHT ENGINE GROUND E1 - PURPLE 1 LUTRON ECOSYSTEM BUS E2 - PURPLE 2 LUTRON 3-WIRE DIMMER CONTROL GREEN 3-WIRE CONNECTION DIMMER YELLOW OR ORANGE ORANGE DIMMING DRIVER LIGHT ENGINE Page 6 of 7

7 WIRING DIAGRAMS FOR T5 SO AND HO 0-10V DIMMING / 0-10V BALLAST 0-10Vdc 24Vdc GRAY PURPLE BLUE DIMMER Zaneen recommends Diva 0-10V (DVTV) dimmer. This diagram applies only to Diva 0-10V (DVTV) dimmer. FIXTURE LUTRON ECO SYSTEM DIGITAL DIMMING BALLAST E1 - PURPLE 1 E2 - PURPLE 2 LUTRON ECOSYSTEM BUS FIXTURE LUTRON 3-WIRE DIMMER CONTROL GREEN 3-WIRE CONNECTION DIMMER YELLOW OR ORANGE ORANGE DIMMING BALLAST FIXTURE Page 7 of 7