Maxline Profile System - Surface

Transcription

1 DIRECT 5 14/16 150mm 6 4/16 158mm L3ML-SUR-SYS DR / Article # Mounting Type Distribution Diffuser Length Angle Voltage Linear Spot Electrical Finishes Accessories Couplers Product Mounting Type Distribution Diffuser Length Angle Couplers Voltage Inserts Electrical Options L3ML-SUR-SYS CE - Ceiling DR -Direct OP - Opal State desired (If required) 120V Linear Spots** LED/ Fluorescent Max Line Surface WU- Wall Uplight (linear LED only) length FC - Surface V LED LED DV V Dimmable (For LED) WD- Wall Downlight AC - Aluminum Cap Specify custom angle L306 - () L12 - (2700K) 24W DN - Non-dimmable (For LED) (for spots) 347V L406 - () L13 - () 24W SO - Standard Output non-dimm. (Optional) L356 - (3500K) L14 - () 24W HO - High Output non-dimmable Upon request L22 - (2700K) 17W DIM1-0-10V L23 - () 17W DIME - Lutron Eco System (10%) Fluorescent L24 - () 17W DIME3 - Lutron Eco System 3 Wire (10%) S2 -SO2lamp DIM3D - Lutron Hi-Lume 3D (1%) H2 -HO2lamp DIM3D3 -LutronHi-Lume3Wire(1%) DIMEH - Lutron Eco System H Series (1%) EM - Emergency (Supplied by others) Other: Please specify Finishes - (see page 5) Accessories Please specify profile / end cap Fluorescent Gels 00 Natural Anodized Aluminum 13 Mysterious Gray R-Red 01 Sparkling Silver 14 Twilight Y - Yellow 02 Black Velvet 15 Lost Dream G-Green 03 Crystal White 16 Purple Sky B -Blue 04 Creamy 17 Fresh Oh P -Pink 05 Hampton Bay 18 Funky P. Pp - Purple 06 Lagoon 19 Kissing Aphrodite O-Orange 07 Urban Forest 20 Poseidon's Paradise 08 In the Army 21 Blue Sky 09 Rusty Angel 22 Spring Green 10 Rusty Rush 23 Mellow Yellow 11 Milk & Chocolate 24 Golden Heart 12 Fade to Gray 25 Gun Metal For unique customized profiles please include a layout drawing or description below: * Include detailed information such as distance between linear lamps, spots and aluminum caps. ** Zaneen will supply submittal drawing for approval once an Purchase Order is received. *** Spot colors and reflectors can be customized by adding suffix to the codes. (See page 3) Profile Layout Suggestions Available for International specifications by adding 'INT' at the end of the existing Model #. International spec sheets are available upon request. For assistance to write your custom specification, your inquiry to: specification@zaneen.com. You will receive a response within 1-2 business days. Page 1 of 7

2 Type Surface (Non-IC Type) Ceiling or Wall (uplight or downlight) mounted Rated for Dry or Damp locations (IP20) Approval Certified by C.S.A. for North American Standards Emission Direct or Asymmetric. Efficiency Acrylic diffuser (snap-in) lens 43% PROFILE Measurements w. 158mm x ht. 150mm (6 1/4" x ht. 5 7/8") Housing Anodized extruded aluminum profile up to /16 long. Profiles are joined with a coupler to ensure uniform appearance and easy installation. Extruded aluminum offers high reflective surface and excellent heat dissipation. Corners 100% homogeneous appearance. 90 degree and custom angles ( degree) are available. Corners are created with mitered cut in lens and aluminum. End Cap has visible screws. Finishes Standard; Natural anodized aluminum Optional; 24 colors offered using premium powder coated finish. Profile and end caps can be specified in different finishes. Wall Bracket If required, aluminum wall brackets are located approximately every 4ft-5ft. Fasteners and wall anchors are supplied by others. Mounting Holes Keyholes are drilled at the factory. Mounting hardware are supplied and installed by others. When using wall fastening spacer or key hole milling, fixture must be specified as up light or down light. INSERTS AR INSERTS LED LED (6.2W/ 880 lm/ft) LED 3500K (6.2W/ 890 lm/ft) LED (6.2W/ 902 lm/ft) (LM 79-80) LED inserts are offered in 12", 23", 34"... increments to 7 5 Max. Zaneen will finalize the actual profile length after calculating the inserts required. * Please contact Zaneen for other color temperature options. Available Configurations 2 lamp overlap SO: 14W, 21W, 28W, 35W / HO: 24W, 39W, 54W Emergency 2 lamp overlap SO: 21W,28W, 35W / HO: 39W,54W SPOTS LED 17W LED Spot (2700K, 2120lm /, 2250lm /, 2440lm) Offered in 4 reflector choices (12, 24, 40 and 58 ) also 25 color options for lamp ring and frame. This spot is adjustable: Rotational 180 and Tilt ±30 24W LED Spot (2700K, 2850lm /, 3030lm /, 3290lm) Offered in 3 reflector choices (12, 24 and 40 ) also 25 color options for reflector color. ELECTRICAL Luminaires are pre-wired with a factory installed branch circuit wiring and quick-release connectors. Through wiring is used to connect the luminaires. BX Cable is connected directly into the fixture. Junction cover plate is available upon request. Power Feed 22mm diameter hole located 2 inches from one end of the fixture, on top of the profile. If a different location is required, please specify. LED Driver: All drivers for this fixture are onboard but in case of remote requirement the driver must be installed into a metal enclosure (supplied by others). Maximum distance between the power supply and the last fixture on the circuit is 30' using a 18- gauge wire. For more than 30', the gauge of the wire must be determined by a certified professional. The length of the fixture specified must be considered within the maximum distance of 30'. Provisions must be made on site for accessibility to the power supplies. *Electronic Class II driver, 120V/ 277V/ 347V(optional). Dimming driver 0-10V (10-100%) Lutron Hi-Lume A type dimming Emergency Inverter Compatible To be installed remotely but provided by others, can be located up to 250 away from the fixture. Emergency Circuit Wiring Upon request. Fluorescent Ballast Electronic high-power factor ballast. Specify 120V, 277V, 347V. Ballast is pre-wired with leads to one end of fixture. Ballast is positioned behind the lamp insert and is fully accessible from below. 0-10V, Lutron 3-wire or Lutron digital dimming options are available. *Lutron dimming ballast is used as standard 120V/ 277V/ 347V. Emergency Ballast To be installed remotely. Emergency Circuit Wiring Upon request. Emergency Testing Switch is installed on the side of the emergency ballast equipped fixture. WARRANTY Zaneen provides a limited warranty from date of purchase to the original purchaser. LED Inserts : 5 year Rated for 50,000 hours at 70% lumen output (L70) LED Driver : 5 year Fluorescent / Ballast : 5 year Dimming Ballast : 3 year 12V Transformer : 1 year Electronic Metal Halide Ballast : 1 year Non-Electrical Components : 1 year Page 2 of 7

3 INSERTS AR INSERTS LED Code Color Temp. (K) Wattage Voltage Lumen CRI Length L L W 37W 5680lm 6000lm 2270mm (7'-5 3/8") 2270mm (7'-5 3/8") L L W 33W 4970lm 5250lm 1980mm (6'-5 15/16") 1980mm (6'-5 15/16") L L W 28W 120Vac* 4260lm 4500lm 1700mm (5'-6 15/16") 1700mm (5'-6 15/16") L L W 23W 3550lm 3750lm 1420mm (4'-7 7/8") 1420mm (4'-7 7/8") L L W 19W 2840lm 3000lm 1140mm (3'-8 7/8") 1140mm (3'-8 7/8") *LED driver included DIMMING DP DV Phase 0-10V ORDER-EXAMPLE: L DV 0-10V INSERT OVERLAPPING Fluorecent Code Lamp Wattage SO / HO Voltage Length L L L L x35W 2x28W / 2x54W 2x21W / 2x39W 2x14W / 2x24W 120Vac L=1475mm (58 1/16") L=1175mm (46 1/4") L=875mm (34 7/16") L=575mm (22 5/8") = L L mm (3 15/16 ) DIMMING DN Non-Dimming DL Dimming ORDER-EXAMPLE: L DL Dimming SPOT INSERTS Spot 1 Code Color Temp. (K) Wattage Voltage Lumen CRI Features Reflector Opt. L L L K 3000 K 4000 K 1 x 17W 1 x 17W 1 x 17W 120Vac * 2120lm 2250lm 2440lm Tilt Rotational ± mm (13 3/4") *LED driver included ORDER-EXAMPLE: REFLECTOR L DV DP DV DIMMING Phase 0-10V 0-10V black Creamy 58 Spot 2 Code Color Temp. (K) Wattage Voltage Lumen CRI Features Reflector Opt. L L L K 3000 K 4000 K 1 x 24W 1 x 24W 1 x 24W 120Vac * 2850lm 3030lm 3290lm 300mm (11 13/16") *LED driver included REFLECTOR DIMMING ORDER-EXAMPLE: L DV DP DV Phase 0-10V 0-10V black 40 Page 3 of 7

4 ELECTRICAL OPTIONS LED DRIVERS* Dimmable Max. Wattage Voltage (mm/inch) DV DN 0-10V dimmable Non-dimmable 100W 100W V / 24Vdc 347V (*Optional) L.318x W.102x H.50.8mm /L.12 1/2 x W.4 x H.2 DIM3 Lutron Hi-Lume A Series 40W * Drivers will be installed remotely and have to be placed in the enclosure provided by others V / 24Vdc L.318x W.102x H.50.8mm /L.12 1/2 x W.4 x H.2 BALLASTS Non-Dimm/Dimmable SO /Wattages HO /Wattages Voltage (mm/inch) S H Standard Output non-dimm High Output non-dimm W V-277V 347V (*Optional) INTEGRAL DIM1 DIME DIME3 DIM3D DIM3D3 DIMEH 0-10V dimming Lutron Eco System(10%) Lutron Eco System 3 wire (10%) Lutron Hi-Lume 3D (1%) Lutron Hi-Lume 3 wire (1%) Lutron Eco System H series (1%) W W 54W 120V-277V 347V (*Optional) INTEGRAL EM Emergency 90 minutes operation W 39-54W 120V-277V L.571.5x W.30x H.30mm /L.22 1/4 x W.1 3/16 x H.1 3/16 COMPONENTS Aluminum Profile *max. 3000mm lengths Aluminum CAP Profile *max. 3000mm lengths Diffuser *max. 3000mm lengths End Cap Coupler Page 4 of 7

5 Color Choices: natural anodized aluminum sparkling silver RAL9006FS black velvet RAL9005FS crystal white RAL 9016FS creamy hampton bay lagoon urban forest in the army rusty angel rusty rush milk & chocolate fade to gray mysterious gray twilight lost dream purple sky fresh Oh funky P. kissing aphrodite poseidon s paradise blue sky spring green mellow yellow golden heart gun metal 00 Standard Finish: natural anodized aluminum Color Finishes: additional charge ADDITIONAL NOTES Page 5 of 7

6 WIRING DIAGRAMS FOR AR LED 0-10V DIMMING / 0-10V DRIVER 0-10Vdc 24Vdc GRAY PURPLE BLUE *DIMMER *Zaneen recommends Diva 0-10V (DVTV) dimmer. * This diagram applies only to Diva 0-10V (DVTV) dimmer. LED LIGHT ENGINE LUTRON ECO SYSTEM DIGITAL DIMMING GROUND GREEN HI-LUME A SERIES LED LIGHT ENGINE GROUND E1 - PURPLE 1 LUTRON ECOSYSTEM BUS E2 - PURPLE 2 LUTRON 3-WIRE DIMMER CONTROL GREEN 3-WIRE CONNECTION DIMMER YELLOW OR ORANGE ORANGE DIMMING DRIVER LED LIGHT ENGINE Page 6 of 7

7 WIRING DIAGRAMS FOR SO AND HO 0-10V DIMMING / 0-10V BALLAST 0-10Vdc 24Vdc GRAY PURPLE BLUE *DIMMER *Zaneen recommends Diva 0-10V (DVTV) dimmer. * This diagram applies only to Diva 0-10V (DVTV) dimmer. FIXTURE LUTRON ECO SYSTEM DIGITAL DIMMING BALLAST E1 - PURPLE 1 E2 - PURPLE 2 LUTRON ECOSYSTEM BUS FIXTURE LUTRON 3-WIRE DIMMER CONTROL GREEN 3-WIRE CONNECTION DIMMER YELLOW OR ORANGE ORANGE DIMMING BALLAST FIXTURE Page 7 of 7