PROJECT INFORMATION PROJECT

Transcription

1 SURFACE PROJECT INFORMATION PROJECT SURFACE DATE TYPE NanoLED Cylinder - Available in 2 wattage/lumen packages with maximum delivered lumens of over 1100 at 20W (57LPW). The NanoLED cylinder provides maximum delivered lumens and optical performance through the optimization of thermal, optical and LED science in the smallest possible aperture. 14 Watts 20 Watts NanoLED HIGH 80+ HIGH CRI CRI CRI CRI Lumens per Watt Source Lumens Delivered Lumens Color Consistency 2-Step MacAdam Ellipse Performance based on 3000K HOW TO SPECIFY Ordering Example: Specify trim code and housing code to order: Example : M KS AS61 - SM - 120V - DIML10 TRIM ORDERING INFORMATION TRIM Wattage FRONT CAP FINISH BODY FINISH BeveLED 3 Diameter Cylinder 9014-M2 14W LED 875 lumens 9020-M2 20W LED 1175 lumens 10 White 13 Statuary Bronze 21 Black 28 Metalized Grey SN Satin Nickel Anodized RAL Custom Color (specify RAL #) 10 White 13 Statuary Bronze 21 Black 28 Metalized Grey SN Satin Nickel Anodized RAL Custom Color (specify RAL #) HOUSING ORDERING INFORMATION BODY LENGTH COLOR BEAM 10 LENS 1 MOUNTING VOLTAGE SM DIMMING DRIVER OPTIONS OAL 27KS 2700K, 80+ CRI 30KS 3000K, 80+ CRI 35KS 3500K, 80+ CRI 40KS 4000K, 80+ CRI 27KH 2700K, 90+ CRI 30KH 3000K, 90+ CRI beam beam beam beam SOC Solite 1 SOF Solite Frosted BOC Borosilicate Clear BOF Borosilicate Frosted AS61 Linear Spread SM Surface Mounted 120V 277V DIML2 0-10V dim, 15% DIML9 TRIAC 15%, 2-wire, 120V only DIML10 ELV 15%, 2-wire, 120V only 2 Step MacAdam ellipse is standard for all 1 10 Clear lens is standard; all others solite is standard , LLC.

2 PRODUCT INFORMATION SURFACE SURFACE 5 Body 10-3/8 Cap 3" Ø Surface Mount SPECIFICATIONS BODY: 3 Ø extruded aluminum body available in 10 length. NanoLED Cylinder body and cap are available in a variety of powder coated paint finishes or an anodized satin nickel finish. Custom colors also available (provide RAL #). Cylinder body finish and cap finish may be separately specified. MOUNTING: Hardware included for mounting to 4-1/2 octagonal junction box. Surface Mount: No visible hardware, tooless mount. 5 Ø x 1/2 round canopy. TRIM: Screw on extruded aluminum with 1 regress solite lens for 25, 35 and 50. Clear lens provided for 10. REFLECTOR: Interchangeable precision optics. 10, 25, 35, 50 beam distributions. FIELD REPLACEABLE LIGHT ENGINE: Available in 2 lumen packages: 14W (875 delivered lumens) and 20W (1175 delivered lumens). Engine is field replaceable through the aperture without tools. CRI / COLOR: 80+ CRI: 2700K, 3000K, and 3500K 90+ High CRI: 2700K and 3000K RATED LIFE: Based on IESNA LM ,000 hours at 70% lumen maintenance (L70). HEAT SINK: Proprietary high performance aluminum die cast heatsink for maximum LED life. DRIVER: (Field Replaceable) Solid state electronic. Constant current. High power factor. Specify 120V or 277V. Driver complies with IEEE C62.41 surge protection. DIMMING: Multiple dimming drivers available. The forward phase (TRIAC), and reverse phase (ELV) dimming drivers are available for 120V only. NOTE: The DIML2 0-10V dimming driver sources 2mA. ACCESSORIES: Accessory holder (2) max, size C. LISTING: Dry/ Damp. IBEW Union made. NRTL / CSA-US tested to UL standards. IBEW union made. WARRANTY: 5 year warranty. PHOTOMETRICS: Consult factory or website for IES files. Tested in accordance with IESNA LM , LLC.

3 DOWNLIGHT 14W 30KS 10 20W 30KS , LLC.

4 DOWNLIGHT 14W 30KS 25 20W 30KS , LLC.

5 DOWNLIGHT 14W 30KS 35 20W 30KS , LLC.

6 DOWNLIGHT 14W 30KS 50 20W 30KS , LLC.

7 DIMMING DRIVER WIRING SCHEMES: DIMMING DRIVER COMPATIBILITY SELECTION GUIDE DIML2 NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details. IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS 1. Keep these instructions in a safe place for future reference. 2. Only qualified electricians in accordance to local codes should install these fixtures. 3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing. 4. Make sure all connections are in accordance with the National Electrical Code and any local regulations. 5. Cap any wires not used separately (not together). DIML2 LED: 0-10V Dimming Driver Wiring (Dims down to 10%) DIML2 Dimmer Compatibility Chart Dimmed Light Qty Fixtures Manufacturer Product Part Number Output Range Per Dimmer* 120V / 277V Use source current per Crestron ilux dimmer expansion module CLS-EXP-DIMFLV 100% - 10% fixture specification Crestron DIN Rail dimmer DIN-4DIMFLV4 100% - 10% sheet to determine Crestron DIN Rail analog output module DIN-A08 100% - 10% number of fixtures per Crestron 8 Channel dimmer module GLX-DIMFLV8 100% - 10% dimmer. Max number Crestron 8 Channel dimmer module GLXP-DIMFLV8 100% - 10% of fixtures is limited by Leviton IllumaTech dimmer IP710-DLX 100% - 10% dimmer load rating. Lightolier (Philips) Vega V2000FAMU 100% - 10% Lutron Diva DVTV-XX 100% - 10% * NOTE: Refer to dimmer manufacturer's documentation for installation instructions and circuit details. DIMMER: 0-10V DIML2 0-10V DIMMING W/RELAY TO SWITCH POWER 0-10V (-) 0-10V (+) SWITCHED HOT GRAY PURPLE BLACK WHITE GREEN DRIVER FIXTURE LED V+ RED V- BLACK NOTE: If switched, non-dimming operation is desired, cap off purple and gray wires individually at installation. Do NOT cap purple and gray wires together. CLASS 2 CONTROL WIRES LINE RELAY GND LINE DIMMER: 0-10V w/ POWER SWITCHING DIML2 0-10V DIMMING (NO RELAY) 0-10V (-) 0-10V (+) SWITCHED HOT GRAY PURPLE BLACK WHITE DRIVER FIXTURE LED V+ RED V- BLACK NOTE: If switched, non-dimming operation is desired, cap off purple and gray wires individually at installation. Do NOT cap purple and gray wires together. GROUND GREEN GND 2016., LLC. I Revised 02/15/2016

8 DIMMING DRIVER WIRING SCHEMES: DIMMING DRIVER COMPATIBILITY SELECTION GUIDE DIML9 NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details. IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS 1. Keep these instructions in a safe place for future reference. 2. Only qualified electricians in accordance to local codes should install these fixtures. 3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing. 4. Make sure all connections are in accordance with the National Electrical Code and any local regulations. 5. Cap any wires not used separately (not together). DIML9 LED: TRIAC Forward Phase Dimming Driver Wiring (Dims down to 15%) 120V Only DIML9 2 WIRE PHASE DIMMING DIMMER: 2 WIRE PHASE FIXTURE LED LINE SWITCHED HOT BLACK WHITE DRIVER V+ RED V- BLACK GROUND GREEN GND ONLY FOR SWITCHES WITH 2016., LLC. I Revised 02/15/2016

9 DIMMING DRIVER WIRING SCHEMES: DIMMING DRIVER COMPATIBILITY SELECTION GUIDE DIML10 NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details. IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE INSTRUCTIONS 1. Keep these instructions in a safe place for future reference. 2. Only qualified electricians in accordance to local codes should install these fixtures. 3. De-energize the electrical circuit at the circuit breaker prior to installation process or servicing. 4. Make sure all connections are in accordance with the National Electrical Code and any local regulations. 5. Cap any wires not used separately (not together). DIML10 LED: ELV Reverse Phase Dimming Driver Wiring (Dims down to 15%) 120V Only DIML10 2 WIRE PHASE DIMMING DIMMER: 2 WIRE PHASE FIXTURE LED LINE SWITCHED HOT BLACK WHITE DRIVER V+ RED V- BLACK GROUND GREEN GND ONLY FOR SWITCHES WITH 2016., LLC. I Revised 02/15/2016