LEDH-SR5C/SR5W/SR5P 5 COB LED Surface Cylinders.

Transcription

1

2 LEDH-SR5C/SR5W/SR5P 5 COB LED Surface Cylinders. Catalog # Project Prepared by Type Date 5 LED Cylinder 7-7/8 (200mm) DESCRIPTION [Ceiling Mount : LEDH-SR5C] 5 aperture cylinder light, Provided in high efficacy LED with integral driver and the optical diffusion produces high lumen transmission and even illumination. Designed for long life operation. DESIGN FEATURES 6 (152mm) LED Module Durable aluminum extrusion heat sink intergrated with COB(chip on board). Inner reflector provide more light and beam distribution. Reflector Anodized haze clear, gold, champange, pewter color finished full reflectors. Also available anodized reflectors with black. Housing Round seamless.060 thick spun aluminum, housing available in semi-matte white, black or silver finish. Heat Sink Aluminum extruded Heat sink designed to facilitate heat dissipation to reduce LED junction temperature for maintaining constant light output, color and life of solid state components. LED power supply driver Include 120~277V input high efficacy driver with the capability to dim using a Triac 120V low voltage electronic dimmer switch. Driver feature power factor >.90, THD <20% and has integral thermal protection to sense over temperature or internal failure. Driver mounts externally to the module, allowing future replacement, if needed. Consult with factory for optional 0~10V analog dimmable driver. 4-7/16 (112mm) [Wall Mount : LEDH-SR5W] SPECIFICATION LED Quantity Input Voltage Wattage (+/-5%) Lu me n (+/-5%) Efficacy ( LP W) Beam Angle 1EA (COB) V AC 14 W 960 lm 68.6 lm/w W 1,488 lm 64.7 lm/w 66 Color (+/-5%) C R I (Typical) Dimming Lamp Life Environment 3000K, 3500K, 4000K 80 Triac(Standard), 0-10V 50,000 hr Damp & Wet Location Triac Approved Dimmers * Lutron: NovaT (Ntelv 300&600) Diva (Dvelv-300P&303P) * Leviton: Acenti: Ate06-1Lw * Leviton Trimatron #705W (incandescent) Consult tech. service or factory for additional dimmers Wall Bracket (LEDH-SR5W) Aluminum casted bracket secured to housing cross-bar by set screws. Warranty 50,000hr of lamp life. Listing cetl Listed. TEL: FAX:

3 TRIM & PHOTOMETRIC REPORT 5 LED Cylinder TRIM * Wide beam reflector is standard. Also available in narrow beam in reflector(consult with factory). LEDT-R54 Specular Open Reflector LEDT-R54 PHOTOMETRIC REPORT * Contact Factory for IES File ft ft ft ft ft ft ,400 2,000 1,600 1, ,200 1,600 2,000 2, ft ft ft ft ft ft Beam Spread: 66 Beam Spread: 66 [LEDH-SR5C/SR5W/SR5P-14] [LEDH-SR5C/SR5W/SR5P-23] ORDERING INFORMATION Housing Pendant Stem Length Watts Color Temp. Driver Housing Finish Reflector Finish Baffle Option LEDH-SR5C (Ceiling Mount) LEDH-SR5W (Wall Mount) LEDH-SR5P (Pendant Mount) -12 : 12 Inches -18 : 18 Inches -24 : 24 Inches -36 : 36 Inches -48 : 48 Inches (For Pendant Mount Only) -14 : 14W -23 : 23W -30 : 3000K -35 : 3500K -40 : 4000K -UTD : 120~277V, Triac Dimming (Standard) -UZTD : 120~277V, 0~10V Dimming *Option -DOB : 120V AC Driver on Board -E M : Emergency battery backup -WH : White -BK : Black - B Z : Bronze - S I : Silver -HC : haze clear -WH : white painted -WB : White Baffle -B B : Black Baffle Example : LEDH-SR5P UTD-WH-HC TEL: FAX:

4 LEDH-SR6C/SR6W/SR6P 6 COB LED Surface Cylinders with Wide Beam Reflector. Catalog # Project Prepared by Type Date 6 LED Cylinder 10-15/16 (278.4mm) 7-7/8 (199.4mm) 4-1/4 (107.7mm) DESCRIPTION [Ceiling Mount : LEDH-SR6C] 6 aperture cylinder light, Provided in high efficacy LED with integral driver and the optical diffusion produces high lumen transmission and even illumination. Designed for long life operation. DESIGN FEATURES LED Module Durable aluminum extrusion heat sink intergrated with COB(chip on board). Inner reflector provide more light and beam distribution. Reflector Anodized haze clear, gold, champange, pewter color finished full reflectors. Also available anodized reflectors with black. Housing Round seamless.060 thick spun aluminum, housing available in semi-matte white, black or silver finish. Heat Sink Aluminum extruded Heat sink designed to facilitate heat dissipation to reduce LED junction temperature for maintaining constant light output, color and life of solid state components. LED power supply driver Include 120~277V input high efficacy driver with the capability to dim using a Triac 120V low voltage electronic dimmer switch. Driver feature power factor >.90, THD <20% and has integral thermal protection to sense over temperature or internal failure. Driver mounts externally to the module, allowing future replacement, if needed. Consult with factory for optional 0~10V analog dimmable driver. [Wall Mount : LEDH-SR6W] SPECIFICATION LED Quantity Input Voltage 1EA (COB) V AC Wattage (+/-5%) Lu me n (+/-5%) Efficacy ( LP W) Beam Angle 14 W W 1, W 2, Color (+/-5%) C R I (Typical) Dimming Lamp Life Environment 3000K, 3500K, 4000K 80 Triac(Standard), 0-10V 50,000 hr Damp & Wet Location Triac Approved Dimmers * Lutron: NovaT (Ntelv 300&600) Diva (Dvelv-300P&303P) * Leviton: Acenti: Ate06-1Lw * Leviton Trimatron #705W (incandescent) Consult tech. service or factory for additional dimmers Wall Bracket (LEDH-SR6W) Aluminum casted bracket secured to housing cross-bar by set screws. Warranty 50,000hr of lamp life. Listing cetl Listed. TEL: FAX:

5 TRIM & PHOTOMETRIC REPORT 6 LED Cylinder TRIM * Wide beam reflector is standard. Also available in narrow beam in reflector(consult with factory). LEDT-R64 Specular Open Reflector LEDT-R64 PHOTOMETRIC REPORT * Contact Factory for IES File Center Beam FC Beam Beam Width Width 3.0 ft ft 6.0 ft ft 9.0 ft ft 12.0 ft ft ft5.9 ft ft7.1 ft 1 Center Beam FC Beam Beam Width Width 3.0 ft2.4 ft 6.1 ft4.9 ft 9.1 ft7.3 ft 12.2 ft9.8 ft ft ft ft ft Beam Spread: Beam Spread: 75 [LEDH-SR6C/SR6W/SR6P-14] [LEDH-SR6C/SR6W/SR6P-23] ft ft ft ft ft ft Beam Spread: 75 [LEDH-SR6C/SR6W/SR6P-30] ORDERING INFORMATION Housing Pendant Stem Length Watts Color Temp. Driver Housing Finish Reflector Finish Baffle Option LEDH-SR6C (Ceiling Mount) LEDH-SR6W (Wall Mount) LEDH-SR6P (Pendant Mount) -12 : 12 Inches -18 : 18 Inches -24 : 24 Inches -36 : 36 Inches -48 : 48 Inches (For Pendant Mount Only) -14 : 14W -23 : 23W -30 : 30W -30 : 3000K -35 : 3500K -40 : 4000K -UTD : 120~277V, Triac Dimming (Standard) (14W,23W&30W only) -UZTD : 120~277V, 0~10V Dimming *Option -DOB : 120V AC Driver on Board -E M : Emergency battery backup -WH : White -BK : Black - B Z : Bronze - S I : Silver -HC : haze clear -WH : white painted -WB : White Baffle -B B : Black Baffle Example : LEDH-SR6P UZTD-WH-HC TEL: FAX:

6 LEDH-SR8C/SR8W/SR8P 8 COB LED Surface Cylinders with Wide Beam Reflector. Catalog # Project Prepared by Type Date 8 LED Cylinder 11-9/16 (293.4mm) 8-7/8 (225.4mm) 4-1/4 (107.7mm) DESCRIPTION [Ceiling Mount : LEDH-SR8C] [Wall Mount : LEDH-SR8W] 8 aperture cylinder light, Provided in high efficacy LED with integral driver and the optical diffusion produces high lumen transmission and even illumination. Designed for long life operation. DESIGN FEATURES LED Module Durable aluminum extrusion heat sink intergrated with COB(chip on board). Inner reflector provide more light and beam distribution. Reflector Anodized haze clear, gold, champange, pewter color finished full reflectors. Also available anodized reflectors with black. Housing Round seamless.060 thick spun aluminum, housing available in semi-matte white, black or silver finish. Heat Sink Aluminum extruded Heat sink designed to facilitate heat dissipation to reduce LED junction temperature for maintaining constant light output, color and life of solid state components. LED Quantity Input Voltage Wattage (+/-5%) Lu me n (+/-5%) Efficacy (LP W) Beam Angle Color (+/-5%) C R I (Typical) Dimming Lamp Life Environment SPECIFICATION 1EA (COB) V AC 14 W W 1, W 2, K, 3500K, 4000K 80 Triac(Standard), 0-10V 50,000 hr Damp & Wet Location Triac Approved Dimmers * Lutron: NovaT (Ntelv 300&600) Diva (Dvelv-300P&303P) * Leviton: Acenti: Ate06-1Lw * Leviton Trimatron #705W (incandescent) 45W 2, LED power supply driver Include 120~277V input high efficacy driver with the capability to dim using a Triac 120V low voltage electronic dimmer switch. Driver feature power factor >.90, THD <20% and has integral thermal protection to sense over temperature or internal failure. Driver mounts externally to the module, allowing future replacement, if needed. Consult with factory for optional 0~10V analog dimmable driver. Consult tech. service or factory for additional dimmers Wall Bracket (LEDH-SR8W) Aluminum casted bracket secured to housing cross-bar by set screws. Warranty 50,000hr of lamp life. Listing cetl Listed. TEL: FAX:

7 TRIM & PHOTOMETRIC REPORT 8 LED Cylinder TRIM * Wide beam reflector is standard. Also available in narrow beam in reflector(consult with factory). LEDT-R84 Specular Open Reflector LEDT-R84 PHOTOMETRIC REPORT * Contact Factory for IES File ft ft ft ft ft ft , , ft ft ft ft ft ft Beam Spread: 63 Beam Spread: 63 [LEDH-SR8C/SR8W/SR8P-14] [LEDH-SR8C/SR8W/SR8P-23] ,400 1, ,167 1, ft ft ft ft ft ft ,800 1,500 1, ,200 1,500 1, ft ft ft ft ft ft Beam Spread: 63 Beam Spread: 63 [LEDH-SR8C/SR8W/SR8P-30] [LEDH-SR8C/SR8W/SR8P-45] ORDERING INFORMATION Housing Pendant Stem Length Watts Color Temp. Driver Housing Finish Reflector Finish Baffle Option LEDH-SR8C (Ceiling Mount) LEDH-SR8W (Wall Mount) LEDH-SR8P (Pendant Mount) -12 : 12 Inches -18 : 18 Inches -24 : 24 Inches -36 : 36 Inches -48 : 48 Inches (For Pendant Mount Only) -14 : 14W -23 : 23W -30 : 30W -45 : 45W -30 : 3000K -35 : 3500K -40 : 4000K -UTD : 120~277V, Triac Dimming (Standard) (14W,23W&30W only) -UZTD : 120~277V, 0~10V Dimming *Option -DOB : 120V AC Driver on Board -E M : Emergency battery backup -WH : White -BK : Black - B Z : Bronze - S I : Silver -HC : haze clear -WH : white painted -WB : White Baffle -B B : Black Baffle Example : LEDH-SR8P UZTD-WH-HC TEL: FAX:

8