LEDH-310ICA 3.5 Low Voltage LED IC Rated New Construction Recessed Housing
|
|
- Edith Daniels
- 5 years ago
- Views:
Transcription
1
2 LEDH-310ICA 3.5 Low Voltage LED IC Rated New Construction Recessed Housing MR16 LED Blub 4-13/16 (123mm) DESCRIPTION The LEDH-310ICA is 3.5 low voltage LED housing for accent task lighting. APPLICATION The LEDH-310ICA is designed for insulated ceilings and can be in direct contact with insulation material. The LEDH-310ICA offers a wide choice of trim types including reflector, lensed and wall wash trims. This AIR-TIGHT housing design prevents airflow through the ceiling, helping save on heating and cooling costs. DESIGN FEATURES Housing Galvanized steel housing painted white. 5-1/2 height allows use in 2 X6 joist construction. Housing adjusts for ceilings up to 1-1/4 thick. Junction Box Listed for through branch circuit wiring. (Max.8 No 12 AWG 90 C branch circuit conductors.(4 in, 4 out)) (5)1/2" knockouts with true pry-out slots and (4) knockouts with Romex cable clamp. Ground wire provided on J-box. Mounting Frame Galvanized steel construction. 8 L X 5-1/2 W Transformer 120V magnetic transformer steps line voltage down to lamp operating voltage for lamps up to 15W Max. Available 277V-12V transformer. Lamp LED MR16 12V 12.2W Max.(Not Included) 3-3/4 (95mm) Ceiling Cut-out : 3-7/8 Lamp, Max, Watt. : 12.2W Listing ETL listed for damp location. Recommended Dimmer * Lutron: D iva(dv-600p) Skylark( S -600P) Ariadni(AY-600P) Consult tech. service or factory for additional dimmers Bar Hangers Maximum extension of 24 allows for extra distance between joists. Housing can be positioned at any point within 24 joist span. Score lines allow tooless shortening for 12 joists. Bar hangers may be repositioned 90 degrees. Integral T-bar clips snaps onto T-bars and no additional clips are required. Socket GU5.3 Ceramic Bi-Pin Socket. Optional Quick Connect Push-in wire connectors. Three Quick Connectors Pre-installed push-in wire connectors for fast and easy wiring.
3 LEDH-310ICAR 3.5 Low Voltage LED IC Rated Remodel Recessed Housing MR16 LED Blub 14-5/16 (363mm) DESCRIPTION The LEDH-310ICAR is 3.5 low voltage LED remodel housing for accent task lighting. 4-13/16 (123mm) APPLICATION The LEDH-310ICAR is designed for insulated ceilings and can be in direct contact with insulation material. The LEDH-310ICAR offers a wide choice of trim types including reflector, lensed and wall wash trims. This AIR-TIGHT housing design prevents airflow through the ceiling, helping save on heating and cooling costs. DESIGN FEATURES Housing Galvanized steel housing painted white. 5-1/2 height allows use in 2 X6 joist construction. Housing adjusts for ceilings up to 1/2 thick. Junction Box Listed for through branch circuit wiring. (Max.8 No 12 AWG 90 C branch circuit conductors.(4 in, 4 out)) (5)1/2" knockouts with true pry-out slots and (4) knockouts with Romex cable clamp. Ground wire provided on J-box. 3-5/8 (92mm) Ceiling Cut-out : 3-7/8 Lamp, Max, Watt. : 12.2W Recommended Dimmer * Lutron: D iva(dv-600p) Skylark( S -600P) Ariadni(AY-600P) Consult tech. service or factory for additional dimmers Transformer 120V magnetic transformer steps line voltage down to lamp operating voltage for lamps up to 15W Max. Available 277V-12V transformer. Socket GU5.3 Ceramic Bi-Pin Socket. Lamp LED MR16 12V 12.2W Max.(Not Included) Remodel Clips 4 remodel clips secure housing and accommodates 1/2 and 5/8 ceiling materials. Optional Quick Connect Push-in wire connectors. Three Quick Connectors Pre-installed push-in wire connectors for fast and easy wiring. Listing ETL listed for damp location.
4 TRIMS For LEDH-310ICA, LEDH-310ICAR MR16 LED Blub LT-350 Shower Frosted Flat Lens Die-Cast Construction O.D : 4-5/16" LT-350WH LT-350CH LT-350SN LT-351 Shower Convex Shape Lens Die-Cast Construction O.D : 4-5/16" LT-351WH LT-351CH LT-351MO LT-352 Tapered Glass Diffuser Die-Cast Construction O.D : 4-5/16" LT-352WH LT-352WH-B LT-352BK LT-354 Adjustable Reflector Die-Cast Construction O.D : 4-5/16" LT-354CL LT-354CL-CH LT-354WH LT-355 Adjustable Baffle Die-Cast Construction O.D : 4-5/16" LT-355WH LT-355BK LT-355BK-CH LT-358 Pin Spot w/ Baffle Die-Cast Construction O.D : 4-5/16" LT-358BK LT-358BK-SN LT-358BK-MO LT-359 Pin Spot w/reflector Die-Cast Construction O.D : 4-5/16" LT-359CL LT-359BK-SN LT-359BK-MO LT-360 Slotted Wall Wash Die-Cast Construction O.D : 4-5/16" LT-360WH LT-360SN LT-360MO
5 TRIMS For LEDH-310ICA, LEDH-310ICAR MR16 LED Blub LT-361 Adjustable Wall Wash w/baffle Die-Cast Construction O.D : 4-5/16" LT-361WH LT-361PB LT-361MO LT-362 Dropped Clear Etched Lens Die-Cast Construction O.D : 4-5/16" LT-362WH LT-362BK LT-352SN LT-364 Gimbal w/baffle Die-Cast Construction O.D : 4-5/16" LT-364WH LT-364BK-SN LT-364BK-MO ORDERING INFORMATION Housing Trim Reflector Baffle Metal Ring LEDH-310ICA LEDH-310ICAR LT-350 LT-351 LT-352 LT-354 LT-355 LT-358 LT-359 LT-360 LT-361 LT-362 LT-364 -CL : clear -WH : white -GD : gold -MA : matte platinum -CP : champagne -PR : pewter -HC : haze clear -WH : white -BK : black -SN : satin nickel -AN : antique nickel -AC : antique copper -MO : mocha -CA : cappuccino -CH : chrome -UN : natural steel -PB : polished brass -WH : white -BK : black -SN : satin nickel -AN : antique nickel -AC : antique copper -MO : mocha -CA : cappuccino -CH : chrome -UN : natural steel -PB : polished brass Example : LEDH-310ICA-LT-361-WH
6 LEDH-410ICA 4 Low Voltage LED IC Rated New Construction Recessed Housing MR16 LED Blub 5-1/2 (140mm) DESCRIPTION The LEDH-410ICA is 4 low voltage LED housing for accent task lighting. APPLICATION The LEDH-410ICA is designed for insulated ceilings and can be in direct contact with insulation material. The LEDH-410ICA offers a wide choice of trim types including reflector, lensed and wall wash trims. This AIR-TIGHT housing design prevents airflow through the ceiling, helping save on heating and cooling costs. DESIGN FEATURES Housing Single wall aluminum housing. 5-1/2 height allows use in 2 X6 joist construction. Housing adjusts for ceilings up to 1-1/4 thick. Junction Box Listed for through branch circuit wiring. (Max.8 No 12 AWG 90 C branch circuit conductors.(4 in, 4 out)) (5)1/2" knockouts with true pry-out slots and (4) knockouts with Romex cable clamp. Ground wire provided on J-box. 4-5/16 (109mm) 13-1/4 will extand to 25 Ceiling Cut-out : 4-3/8 Lamp, Max, Watt. : 12.2W Listing ETL listed for damp location. Recommended Dimmer * Lutron: D iva(dv-600p) Skylark( S -600P) Ariadni(AY-600P) Consult tech. service or factory for additional dimmers Mounting Frame Galvanized steel construction. 8 L X 5-1/2 W Transformer 120V magnetic transformer steps line voltage down to lamp operating voltage for lamps up to 15W Max. Available 277V-12V transformer. Lamp LED MR16 12V 12.2W Max.(Not Included) Bar Hangers Maximum extension of 24 allows for extra distance between joists. Housing can be positioned at any point within 24 joist span. Score lines allow tooless shortening for 12 joists. Bar hangers may be repositioned 90 degrees. Integral T-bar clips snaps onto T-bars and no additional clips are required. Socket GU5.3 Ceramic Bi-Pin Socket. Optional Quick Connect Push-in wire connectors. Three Quick Connectors Pre-installed push-in wire connectors for fast and easy wiring.
7 LEDH-410ICAR 4 Low Voltage LED IC Rated Remodel Recessed Housing MR16 LED Blub 14-3/8 (365.2mm) DESCRIPTION The LEDH-410ICAR is 4 low voltage LED remodel housing for accent task lighting. 5-5/8 (142.3mm) APPLICATION The LEDH-410ICAR is designed for insulated ceilings and can be in direct contact with insulation material. The LEDH-410ICAR offers a wide choice of trim types including reflector, lensed and wall wash trims. This AIR-TIGHT housing design prevents airflow through the ceiling, helping save on heating and cooling costs. DESIGN FEATURES Housing Single wall aluminum housing. 5-1/2 height allows use in 2 X 6 joist construction. Housing adjusts for ceilings up to 1-1/2 thick. 4-1/8 (105mm) Junction Box Listed for through branch circuit wiring. (Max.8 No 12 AWG 90 C branch circuit conductors.(4 in, 4 out)) (5)1/2" knockouts with true pry-out slots and (4) knockouts with Romex cable clamp. Ground wire provided on J-box. Ceiling Cut-out : 4-3/8 Lamp, Max, Watt. : 12.2W Recommended Dimmer * Lutron: D iva(dv-600p) Skylark( S -600P) Ariadni(AY-600P) Consult tech. service or factory for additional dimmers Transformer 120V magnetic transformer steps line voltage down to lamp operating voltage for lamps up to 15W Max. Available 277V-12V transformer. Socket GU5.3 Ceramic Bi-Pin Socket. Lamp LED MR16 12V 12.2W Max.(Not Included) Remodel Clips 3 remodel clips secure housing and accommodates 1/2 and 5/8 ceiling materials. Optional Quick Connect Push-in wire connectors. Three Quick Connectors Pre-installed push-in wire connectors for fast and easy wiring. Listing ETL listed for damp location.
8 TRIMS & PHOTOMETRIC REPORT For LEDH-410ICA, LEDH-410ICAR TRIMS LT-42 Adjustable Baffle White Metal Trim Ring O.D : 4-7/8" MR16 LED Blub LT-42-WH LT-42-BK LT-42-CH LT-44 Adjustable Reflector White Metal Trim Ring O.D : 4-7/8" LT-44-CL LT-44-GD LT-44BK-MO LT-43 Eyeball White Metal Trim Ring O.D : 4-7/8" LT-43WH LT-43PB LT-43MO LT-47 Retractable Wall Wash White Metal Trim Ring O.D : 4-7/8" LT-47WH LT-47CH LT-47MO LT-48 Adjustable Wall Wash White Metal Trim Ring O.D : 4-7/8" LT-48WH LT-48SN LT-48AN LT-49 Pin Hole w/ Baffle White Metal Trim Ring O.D : 4-7/8" LT-49WH LT-48SN LT-49MO LT-410 Slotted Wall Wash w/ Baffle White Metal Trim Ring O.D : 4-7/8" LT-410WH LT-410BK LT-410BK-MO LT-411 Gimbal White Metal Trim Ring O.D : 4-7/8" LT-411WH LT-411SN LT-411MO
9 TRIMS & PHOTOMETRIC REPORT For LEDH-410ICA, LEDH-410ICAR TRIMS LT-416 Eyeball w/ Baffle White Metal Trim Ring O.D : 4-7/8" MR16 LED Blub LT-416WH LT-416BK LT-416BK-PB LT-418 Pin Spot White Metal Trim Ring O.D : 4-7/8" LT-418WH LT-418BK LT-419BK-SN LT-46 LT-417 Wall Wash White Metal Trim Ring O.D : 4-7/8" Wall Wash w/ Baffle White Metal Trim Ring O.D : 4-7/8" LT-46WH LT-417WH LT-417BK ORDERING INFORMATION Housing Trim Reflector Baffle Metal Ring LEDH-410ICA LEDH-410ICAR LT-42 LT-43 LT-44 LT-47 LT-48 LT-49 LT-410 LT-411 LT-416 LT-418 LT-46 LT-417 -CL : clear -WH : white -GD : gold -MA : matte platinum -CP : champagne -PR : pewter -HC : haze clear -WH : white -BK : black -SN : satin nickel -AN : antique nickel -AC : antique copper -MO : mocha -CA : cappuccino -CH : chrome -UN : natural steel -PB : polished brass -WH : white -BK : black -SN : satin nickel -AN : antique nickel -AC : antique copper -MO : mocha -CA : cappuccino -CH : chrome -UN : natural steel -PB : polished brass Example : LEDH-410ICA-LT-42-WH
10 CREE COB LED Designed as a direct retrofit to most MR16 lighting fixtures 6W LED lamp, for replacement of 50W halogen lamp High energy efficiency High quality light with a color rendering index of 80 Suitable for use in totally enclosed luminaires Product Offering reference Wattage CCT Luminous Beam Angle E9564F-M W 2700K 450Lm 25 / 40 E9564F-M W 3000K 450Lm 25 / Features and Benefits 6W GU5.3 base LED lamp as high-quality 25, 40 beam angle 12V AC/DC input voltage Available in two different color temperatures: 2700K warm white 3000K warm white 40,000 hours lifetime UV,NIR radiation free and Mercury free 3years Lum-Tech Lighting warranty 2. Common Characteristics ² Average lifetime ³ Starting time Switching cycles (30s on, 30s off) Warm up time for 60% light Working Conditions Tc temperature max ⁴ Mercury max 40,000H 0.02s 1,000,000 None -20~ mg LED Brand Length Diameter Weight Input voltage Nominal current (12VAC/ 60HZ) Power Power factor CREE 46.5mm 50mm 52g 12VAC/DC 1.0A max 6W > 0.75
11 LEDH-3110ICA 3.5 LED IC/AIR-TIGHT Recessed down light for new construction LEDH LED NON-IC Recessed down light for new construction 3.5 COB LED 8 (203mm) 5-1/2 (140mm) DESCRIPTION 13-1/4" Will Expand To 25" 4-3/8 (110mm) Height : 5-1/2 Ceiling Cut-out : 3-7/8 LEDH-3110ICA and LEDH-3110 is designed to apply with IC and Non-IC type 3.5 aperture down-light. LED engine is designed to maintain 70% average lumen at 50,000hr or 3 years life installed even in the ceiling completely insulated and air sealed housing. Non-IC rated housing must be kept 3 from insulation. Equivalent light output to 35W MR16 lamp. Suitable for Wet Location. DESIGN FEATURES Housing Galvanized steel housing with black-painted. Housing can be adjustable for ceiling thickness up to 1-1/4 Junction Box Listed for through branch circuit wiring.(max.8 No 12 AWG 90 C branch circuit conductors.) (5)1/2" knockouts with true pry-out slots and (4) knockouts with Romex cable clamp. Ground wire provided on J-box. Provided listed quick connectors for easy snap-in wires. (Optional) Bar Hangers 24 Bar Hangers provide stability and support on joists and T-Bar Grid ceilings. Housing can be positioned at any point within 24 joist span. Score lines allow tooless shortening for 12 joists. Trims Available with baffle trims in white or black painted and haze clear reflectors. See Trims spec sheet for selection or ordering information. Available in the (2) different upper reflectors for each be MED(Medium spot beam)-30, WFL(Wide flood spot beam)-45 Optics Glass Lens: Textured fine surface of tempered glass providing high lumen transmission and diffusion for even illumination. LED Engine Heat sink designed by computer simulation and aluminum board for low heat operation. Lumen Maintenance: L70/50, 70% lumens/50,000 hours Electrical Connection: LED lamp module is replaceable via on-board quick disconnect terminal (No tools required). Electrical connection; Provided with quick connector between LED module and housing for easy plug and play installation. Also available GU24 base connector for compact fluorescent housing. (Optional) 120V LED Power Supply on-bed with customized IC chip % triac dimmable for most of leading and trailing edge incandescent & low voltage dimmer switches. Patented (Pending in USA) driving circuit to prevent inrush current hurting switch and module. Recommended for use max. 45 fixtures per run of a dimmer switch 600W loaded and max. 23 fixtures per a dimmer switch 300W loaded. Warranty 50,000hr of lamp life. Listing ccsa-us Certificated LED Quantity Input Voltage Wattage (+/-5%) Lu me n (+/-5%) Efficacy(LPW) (+/-5%) Color (+/-5%) C R I (Typical) Reflector Beam Angle Dimming Lamp Life Environment SPECIFICATION 1EA (COB) 120V AC 10.6 W 430 lm 40.6 lm/w 2700K, 3000K, 4000K Triac 50,000hr Damp & Wet Location Trailing Edge Dimmer - Lutron Model Numbers : DVCL Series DVLV Series* Nova T NT Series Glyder GLV Series* Ariadni AYCL Series RadioRA 2 10ND Series* SLV Series SLV Series Contour CTCL Series Maestro Wireless MRF2-6ND Series* Lutron Homeworks RPM-4U* Lutron Homeworks QS HQRD-6ND Series* Homeworks QS HQRD-10ND Series* - Lutron Model Numbers : SureSlide 6633* Leading Edge Dimmer DVELV Series* SELV Series* Nova T NTELV Series* RadioRA RRD-6NA Series* Maestro MAELV Series* Maestro MRF2-6ELV Series* Grafik Eye PHPM-PA Series Homeworks QS HQRD-6ND Series* Consult tech. service or factory for additional dimmers
12 LEDH-3110ICAR 3.5 LED IC/AIR-TIGHT Recessed down light for Remodeling LEDH-3110R 3.5 LED NON-IC Recessed down light for Remodeling 3.5 COB LED 5-5/16" (134.8mm) DESCRIPTION 3-7/8" (98.5mm) 16-3/4" (423mm) Height : 5-5/16 Ceiling Cut-out : 3-7/8 LEDH-3110ICAR and LEDH-3110R is designed to apply with IC and Non-IC type 3.5 aperture down-light. LED engine is designed to maintain 70% average lumen at 50,000hr or 3 years life installed even in the ceiling completely insulated and air sealed housing. Non-IC rated housing must be kept 3 from insulation. Equivalent light output to 35W MR16 lamp. Suitable for Wet Location. DESIGN FEATURES Housing Galvanized steel housing with black-painted. Junction Box Listed for through branch circuit wiring.(max.8 No 12 AWG 90 C branch circuit conductors.) (5)1/2" knockouts with true pry-out slots and (4) knockouts with Romex cable clamp. Ground wire provided on J-box. Provided listed quick connectors for easy snap-in wires. (Optional) Remodel Clips 3 remodel clips secure housing and accommodates 1/2" and 5/8" ceiling materials. Trims Available with baffle trims in white or black painted and haze clear reflectors. See Trims spec sheet for selection or ordering information. Available in the (2) different upper reflectors for each be MED(Medium spot beam)-30, WFL(Wide flood spot beam)-45 Optics Glass Lens: Textured fine surface of tempered glass providing high lumen transmission and diffusion for even illumination. LED Engine Heat sink designed by computer simulation and aluminum board for low heat operation. Lumen Maintenance: L70/50, 70% lumens/50,000 hours Electrical Connection: LED lamp module is replaceable via on-board quick disconnect terminal (No tools required). Electrical connection; Provided with quick connector between LED module and housing for easy plug and play installation. Also available GU24 base connector for compact fluorescent housing. (Optional) 120V LED Power Supply on-bed with customized IC chip % triac dimmable for most of leading and trailing edge incandescent & low voltage dimmer switches. Patented (Pending in USA) driving circuit to prevent inrush current hurting switch and module. Recommended for use max. 45 fixtures per run of a dimmer switch 600W loaded and max. 23 fixtures per a dimmer switch 300W loaded. Warranty 50,000hr of lamp life. Listing ccsa-us Certificated SPECIFICATION LED Quantity 1EA (COB) Input Voltage 120V AC Wattage (+/-5%) 10.6 W Lu me n (+/-5%) 430 lm Efficacy(LPW) (+/-5%) 40.6 lm/w Color (+/-5%) 2700K, 3000K, 4000K C R I (Typical) 80 Reflector Beam Angle 25 Dimming Triac Lamp Life 50,000hr Environment Damp & Wet Location Trailing Edge Dimmer - Lutron Model Numbers : DVCL Series DVLV Series* Nova T NT Series Glyder GLV Series* Ariadni AYCL Series RadioRA 2 10ND Series* SLV Series SLV Series Contour CTCL Series Maestro Wireless MRF2-6ND Series* Lutron Homeworks RPM-4U* Lutron Homeworks QS HQRD-6ND Series* Homeworks QS HQRD-10ND Series* - Lutron Model Numbers : SureSlide 6633* Leading Edge Dimmer DVELV Series* SELV Series* Nova T NTELV Series* RadioRA RRD-6NA Series* Maestro MAELV Series* Maestro MRF2-6ELV Series* Grafik Eye PHPM-PA Series Homeworks QS HQRD-6ND Series* Consult tech. service or factory for additional dimmers
13 TRIMS & PHOTOMETRIC REPORT For LEDH-3110(R), LEDH-3110ICA(R) 3.5 COB LED TRIMS LEDT-C34 LEDT-C32 Reflector haze clear reflector (-HC) pewter reflector (-PR) champagne reflector (-CP) white painted reflector (-WH) O.D : 4-5/16" Baffle white baffle (-WH) black baffle (-BK) O.D : 4-5/16" LEDT-C34-WH LEDT-C32-WH PHOTOMETRIC REPORT * Contact Factory for IES File Polar Candela Distribution CD: VA: ft 4.0ft 6.0ft 8.0ft 10.0ft 12.0ft Illuminance at a Distance Center Beam FC Beam Width fc 1.1 ft 44.6 fc 2.2 ft 19.8 fc 3.3 ft 11.2 fc 4.4 ft 7.1 fc 5.6 ft 5.0 fc 6.7 ft Beam Spread: 31 [LEDH-3110ICA-30+LEDT-C34-30] ORDERING INFORMATION Housing Color Temp. Driver Trim Reflector finish Baffle & Metal Ring finish LEDH-3110 LEDH-3110ICA LEDH-3110R LEDH-3110ICAR -27 : 2700K -30 : 3000K -40 : 4000K -DOB: 120V Driver on Board (dimmable with any Line or Low Voltage Dimmer) LEDT-C34 LEDT-C32 -HC : haze clear -P R : pewter -CP : champane -WH: white painted -WH: white -BK : black -SN : satin nickel -AN: antique nickel -AC : antique copper -MO: mocha -C A: cappuccino -CH: chrome -UN: natural steel - P B : polished brass Example : LEDH-3110ICA-30-DOB Example : LEDT-C34-HC-WH
14 LEDH-NCR4ICA-DOB 4 Line Voltage LED Recessed Housing with Baffle Trim NON-IC type New Construction or Remodel Application 4 LED 7-3/8 (187mm) 3-1/2 (89mm) 7-1/8 (181mm) 4-15/16 (126mm) DESCRIPTION DESIGN FEATURES LED Module&Trim Durable die-casting aluminum heat sink with intergrated trim in one-piece. Module construction includes LED, heat sink, lens, baffle trim. White paint finish standard. Available in black baffle with white flange. Lens Impact-resistant plastic. High lumen transmission and diffusing for even illumination. Sealed for wet location to use in shower room. Mounting Provided plaster frame (7-1/8 x 7-1/8 ) for new construction. (2)mounting chips on trim module for use of remodeling version. HB-6 bar hangers are option to use of new contruction. Electrical connection; J-box: - Installed on the top of fixture with (5)1/2 knockout. - Listed for through branch circuit wiring.(max. 4 No. 12 AWG 90 C Conductions.) - Ground wire provided. 120V LED Power Supply on-bed with customized IC chip % triac dimmable for most of leading and trailing edge Triac dimmer switches in the market. Patented (Pending in USA) driving circuit to prevent inrush current hurting switch and module. Recommended for use max. 45 fixtures per run of a dimmer switch 600W loaded and max. 23 fixtures per a dimmer switch 300W loaded. Packing 12 individual color box in master carton. Warranty 50,000hr of lamp life. Listing -ETL Listed. -State of california Title 24 -Energy star Approved & Listed Accessories Hanger bars for use with housing plate in new construction applications Ceiling Cut-out : 4-1/4 4 aperture promotional LED housing with 120V, 10W AC LED Module, integral triac dimmable by most of leading and trailing edge dimmer switches in the market. The LEDH-NCR4ICA-DOB is designed for use in new construction or remodel applications with insulated ceilings. Thermally protected, Suitable for wet location. SPECIFICATION LED Quantity Input Voltage Wattage (+/-5%) C R I (Typical) Lu me n (+/-5%) Efficacy (LPW) 1EA (COB) 120V AC 10 W 80 CRI 600 lm 60 lm/w 90 CRI 480 lm 48 lm/w Color (+/-5%) Beam Angle Dimming Lamp Life Environment 2700K, 3000K, 4000K Triac 50,000 hr Damp & Wet Location Trailing Edge Dimmer - Lutron Model Numbers : DVCL Series DVLV Series* Nova T NT Series Glyder GLV Series* Ariadni AYCL Series RadioRA 2 10ND Series* SLV Series SLV Series Contour CTCL Series Maestro Wireless MRF2-6ND Series* Lutron Homeworks RPM-4U* Lutron Homeworks QS HQRD-6ND Series* Homeworks QS HQRD-10ND Series* - Lutron Model Numbers : SureSlide 6633* Leading Edge Dimmer DVELV Series* SELV Series* Nova T NTELV Series* RadioRA RRD-6NA Series* Maestro MAELV Series* Maestro MRF2-6ELV Series* Grafik Eye PHPM-PA Series Homeworks QS HQRD-6ND Series* Consult tech. service or factory for additional dimmers
15 LEDH-RT4ICA 4 LED IC/AIR-TIGHT Recessed down light for new construction 4 LED 6-3/8 (162mm) 5-9/16 (141mm) DESCRIPTION LEDH-RT4ICA housing designed for use with a separate LED engine kit that is intergraled with heat sink and trims and compatible 4 LED trims.the This fixture offer easy and fast installation using a disconnect device and held securely in the housing with two friction blade bracket. DESIGN FEATURES 8-1/8 (207mm) Housing Single wall aluminum housing gasketed for IC/Air-Tight in insulated ceiling. Housing can be adjustable for ceiling thickness up to 1-1/4 LED Module&Trim Two-piece interchangable trim to reflector or baffle. Module construction includes LED, heat sink, lens, baffle trim. white paint finish standard. Available in black baffle with white flange. Junction Box Listed for through branch circuit wiring.(max.8 No 12 AWG 90 C branch circuit conductors.) (5)1/2" knockouts with true pry-out slots and (4) knockouts with Romex cable clamp. Ground wire provided on J-box. Provided listed quick connectors for easy snap-in wires. (Optional) Bar Hangers 24 Bar Hangers provide stability and support on joists and T-Bar Grid ceilings. Housing can be positioned at any point within 24 joist span. Score lines allow tooless shortening for 12 joists. Lens Impact-resistant plastic. High lumen transmission and diffusing for even illumination. LED Module Heat sink designed by computer simulation and aluminum board for low heat operation. Lumen Maintenance: L70/50, 70% lumens/50,000 hours Electrical connection; Provided with quick connector between LED module and housing for easy plug and play installation. Also available GU24 base connector for compact fluorescent housing. (Optional) 120V LED Power Supply on-bed with customized IC chip % triac dimmable for most of leading and trailing edge incandescent & low voltage dimmer switches. Patented (Pending in USA) driving circuit to prevent inrush current hurting switch and module. Recommended for use max. 45 fixtures per run of a dimmer switch 600W loaded and max. 23 fixtures per a dimmer switch 300W loaded. Warranty 50,000hr of lamp life. Listing -ETL Listed. -State of california Title 24 -Energy star Approved & Listed 4-1/4 (109mm) 4-1/4 (109mm) Height : 5-9/16 Housing Aperture : 4-1/4 Ceiling Cut-out : 4-3/8 SPECIFICATION LED Quantity Input Voltage Wattage (+/-5%) Lu me n (+/-5%) Efficacy (LPW) 1EA (COB) 120V AC 10 W 560 lm 56 lm/w 12 W 650 lm 54 lm/w Color (+/-5%) C R I (Typical) Beam Angle Dimming Lamp Life Environment 2700K, 3000K, 4000K Triac 50,000 hr Damp & Wet Location Trailing Edge Dimmer - Lutron Model Numbers : DVCL Series DVLV Series* Nova T NT Series Glyder GLV Series* Ariadni AYCL Series RadioRA 2 10ND Series* SLV Series SLV Series Contour CTCL Series Maestro Wireless MRF2-6ND Series* Lutron Homeworks RPM-4U* Lutron Homeworks QS HQRD-6ND Series* Homeworks QS HQRD-10ND Series* - Lutron Model Numbers : SureSlide 6633* Leading Edge Dimmer DVELV Series* SELV Series* Nova T NTELV Series* RadioRA RRD-6NA Series* Maestro MAELV Series* Maestro MRF2-6ELV Series* Grafik Eye PHPM-PA Series Homeworks QS HQRD-6ND Series* Consult tech. service or factory for additional dimmers
16 LEDH-RT4ICAR LEDH-RT4ICAR Remodel housing designed for use with a separate LED engine kit that is intergraled with heat sink and trims and compatible 4 LED trims. The This fixture offer easy and fast installation using a disconnect device and held securely in the housing with two friction blade bracket. 4-1/4 (109mm) Housing Single wall aluminum housing gasketed for IC/Air-Tight in insulated ceiling. 5-1/2 height allows use in 2 x 6 joist costruction. LED Module&Trim Two-piece interchangable trim to reflector or baffle. Module construction includes LED, heat sink, lens, baffle trim. white paint finish standard. Available in black baffle with white flange. Junction Box Listed for through branch circuit wiring.(max.8 No 12 AWG 90 C branch circuit conductors.) (5)1/2" knockouts with true pry-out slots and (4) knockouts with Romex cable clamp. Ground wire provided on J-box. Provided listed quick connectors for easy snap-in wires. (Optional) Remodel Clips 3 remodel clips secure housing and accommodates 1/2 and 5/8 ceiling materials. Lens Impact-resistant plastic. High lumen transmission and diffusing for even illumination. LED Engine Heat sink designed by computer simulation and aluminum board for low heat operation. Lumen Maintenance: L70/50, 70% lumens/50,000 hours Electrical connection; Provided with quick connector between LED module and housing for easy plug and play installation. Also available GU24 base connector for compact fluorescent housing. (Optional) 120V LED Power Supply on-bed with customized IC chip % triac dimmable for most of leading and trailing edge incandescent & low voltage dimmer switches. Patented (Pending in USA) driving circuit to prevent inrush current hurting switch and module. Recommended for use max. 45 fixtures per run of a dimmer switch 600W loaded and max. 23 fixtures per a dimmer switch 300W loaded. Warranty 50,000hr of lamp life. Listing -ETL Listed. -State of california Title 24 -Energy star Approved & Listed SPECIFICATION LED Quantity Input Voltage Wattage (+/-5%) Lu me n (+/-5%) Efficacy (LPW) 1EA (COB) 120V AC 10 W 560 lm 56 lm/w 12 W 650 lm 54 lm/w Color (+/-5%) C R I (Typical) Beam Angle Dimming Lamp Life Environment 2700K, 3000K, 4000K Triac 50,000 hr Damp & Wet Location Trailing Edge Dimmer - Lutron Model Numbers : DVCL Series DVLV Series* Nova T NT Series Glyder GLV Series* Ariadni AYCL Series RadioRA 2 10ND Series* SLV Series SLV Series Contour CTCL Series Maestro Wireless MRF2-6ND Series* Lutron Homeworks RPM-4U* Lutron Homeworks QS HQRD-6ND Series* Homeworks QS HQRD-10ND Series* - Lutron Model Numbers : SureSlide 6633* Leading Edge Dimmer DVELV Series* SELV Series* Nova T NTELV Series* RadioRA RRD-6NA Series* Maestro MAELV Series* Maestro MRF2-6ELV Series* Grafik Eye PHPM-PA Series Homeworks QS HQRD-6ND Series* Consult tech. service or factory for additional dimmers
17 TRIMS & PHOTOMETRIC REPORT For LEDH-RT4ICA(R) 4 LED TRIMS LEDT-C44 LEDT-C42 Reflector haze clear reflector (-HC) pewter reflector (-PR) champane reflector (-CP) white painted reflector (-WH) O.D : 4-5/16" Baffle white baffle (-WH) black baffle (-BK) O.D : 4-5/16" LEDT-C44-WH LEDT-C42-WH PHOTOMETRIC REPORT * Contact Factory for IES File Polar Candela Distribution CD: VA: [LEDH-RT4ICA(R)] ft 4.0ft 6.0ft 8.0ft 10.0ft 12.0ft Illuminance at a Distance Center Beam FC Beam Width fc 2.4 ft fc 4.7 ft fc 7.1 ft 7.08 fc 9.4 ft 4.53 fc 11.8 ft 3.15 fc 14.1 ft Beam Spread: 61 ORDERING INFORMATION Housing Watts Color Temp. Driver Trim Reflector finish Baffle & Metal Ring finish LEDH-RT4ICA LEDH-RT4ICAR -10 : 10W -12 : 12W -27 : 2700K -30 : 3000K -40 : 4000K -DOB: 120V Driver on Board (dimmable with any Line or Low Voltage Dimmer) LEDT-C44 LEDT-C42 -HC : haze clear -P R : pewter -CP : champane -WH: white painted -WH: white -BK : black -SN: satin nickel -AN : antique nickel -AC: antique copper -MO: mocha -C A: cappuccino -CH: chrome -UN: natural steel - P B : polished brass Example : LEDH-RT4ICA DOB Example : LEDT-C42-WH-WH
18 LED-AFC4 120V 4 LED Recessed Retrofit-Kit with E26 and GU24 Base Adapter 4 LED 3-1/8 (80mm) DESCRIPTION The 4 Retrofit LED module&trim kit with E26 medium screw base for the 4 IC/Airtight and Non-IC incandescent recessed downlight and GU24 adapter for CFL housing. It s designed for use with Lumtech# IH-410, IH-410ICA and the remodeled including other compatible most 4 housings classified by ETL. High efficacy LED with integral dimmable driver and the optical diffusion produces high lumen transmission and even illumination. Suitable for wet location. DESIGN FEATURES 4-15/16 (126mm) LED Module&Trim Durable aluminum extrusion heat sink with intergrated with COB(chip on board). Module construction includes LED, heat sink, lens, baffle trim. Available with baffle trims in white or black painted and clear or white reflectors. Lens Impact-resistant plastic. High lumen transmission and diffusing for even illumination. Housing compatibility See Housing Compatibility section Electrical connection; E26 medium screw-base Edison connector provides easy retrofit of incandescent housing. Also available GU24 base connector for compact fluorescent housing. (Optional) 120V LED Power Supply on-bed with customized IC chip % triac dimmable for most of leading and trailing edge incandescent & low voltage dimmer switches. Patented (Pending in USA) driving circuit to prevent inrush current hurting switch and module. Recommended for use max. 45 fixtures per run of a dimmer switch 600W loaded and max. 23 fixtures per a dimmer switch 300W loaded. Warranty 50,000hr of lamp life. Listing - ETL Listed. - State of california Title 24 - Energy star Approved & Listed Consult tech. service or factory for additional dimmers SPECIFICATION LED Quantity Input Voltage Wattage (+/-5%) Lu me n (+/-5%) Efficacy (LPW) 1EA (COB) 120V AC 10 W 560 lm 56 lm/w 12 W 650 lm 54 lm/w Color (+/-5%) C R I (Typical) Beam Angle Dimming Lamp Life Environment 2700K, 3000K, 4000K Triac 50,000 hr Damp & Wet Location Trailing Edge Dimmer - Lutron Model Numbers : DVCL Series DVLV Series* Nova T NT Series Glyder GLV Series* Ariadni AYCL Series RadioRA 2 10ND Series* SLV Series SLV Series Contour CTCL Series Maestro Wireless MRF2-6ND Series* Lutron Homeworks RPM-4U* Lutron Homeworks QS HQRD-6ND Series* Homeworks QS HQRD-10ND Series* - Lutron Model Numbers : SureSlide 6633* Leading Edge Dimmer DVELV Series* SELV Series* Nova T NTELV Series* RadioRA RRD-6NA Series* Maestro MAELV Series* Maestro MRF2-6ELV Series* Grafik Eye PHPM-PA Series Homeworks QS HQRD-6ND Series*
19 PHOTOMETRIC REPORT 4 LED Recessed Retrofit-Kit with E26 and GU24 Base Adapter 4 LED HOUSING COMPATIBILITY LED-AFC4 ETL Listed for installation in the following Lumtech E26 screw based 4 standard and shallow recessed housings; 4 : IH-410, IH-410R, IH-410ICA, FEH-V4ICA-GU24, FEH-V4ICAR-GU24 (GU24 base adapter only) LED-AFC4 ETL Classifed for retrofit in the following 4 recessed housing; Halo : H99T, H99RT, H99ICT All-Pro : ET400, ET400R, ET400AT Juno : TC1, TC1R, IC1P Capril : R4, RR4, R4ASIC Lithonia : L3, L3R Thomas : PS4, PS4RM, PS4ASIC TRIMS LEDT-C44 Retrofit trim, Changeable with haze clear reflector (-HC) pewter reflector (-PR) champagne reflector (-CP) white painted reflector (-WH) O.D : 4-15/16" (126mm) TML-C44-HC TML-C44-WH LEDT-C42 Baffle white baffle (-WH) black baffle (-B K) O.D : 4-15/16" (126mm) TML-C42-WH ORDERING INFORMATION Retrofit Watts Color Temp. Driver Trim Reflector finish Baffle LED-AFC4-10 : 10W -12 : 12W -27 : 2700K -30 : 3000K -40 : 4000K -DOB: 120V Driver on Board (dimmable with any Line or Low Voltage Dimmer) LEDT-C44 LEDT-C42 -HC : haze clear -P R : pewter -CP : champane -WH: white painted -WH: white -BK : black Example : LED-AFC DOB Example : LEDT-C42-HC-WH
20 LED-AFR4 120V 4 LED Recessed Retrofit-Kit with E26 and GU24 Base Adapter 4 LED 2-1/8 (54.5mm) 4-15/16 (126mm) DESCRIPTION The 4 Retrofit LED module&trim kit with E26 medium screw base for the 4 IC/Airtight and Non-IC incandescent recessed downlight and GU24 adapter for CFL housing. It s designed for use with Lumtech# IH-410, IH-410ICA and the remodeled including other compatible most 4 housings classified by ETL. High efficacy LED with integral dimmable driver and the optical diffusion produces high lumen transmission and even illumination. Suitable for wet location. DESIGN FEATURES LED Module&Trim Durable die-casting aluminum heat sink with intergrated trim in one-piece. Module construction includes LED, heat sink, lens, baffle trim. white paint finish standard. Available in black baffle with white flange. Lens Impact-resistant plastic. High lumen transmission and diffusing for even illumination. Housing compatibility See Housing Compatibility section Electrical connection; E26 medium screw-base Edison connector provides easy retrofit of incandescent housing. Also available GU24 base connector for compact fluorescent housing. (Optional) 120V LED Power Supply on-bed with customized IC chip % triac dimmable for most of leading and trailing edge incandescent & low voltage dimmer switches. Patented (Pending in USA) driving circuit to prevent inrush current hurting switch and module. Recommended for use max. 45 fixtures per run of a dimmer switch 600W loaded and max. 23 fixtures per a dimmer switch 300W loaded. Warranty 50,000hr of lamp life. Listing - ETL Listed. - State of california Title 24 - Energy star Approved & Listed Consult tech. service or factory for additional dimmers SPECIFICATION LED Quantity Input Voltage Wattage (+/-5%) C R I (Typical) Lu me n (+/-5%) Efficacy (LPW) 1EA (COB) 120V AC 10 W 80 CRI 600 lm 60 lm/w 90 CRI 480 lm 48 lm/w Color (+/-5%) Beam Angle Dimming Lamp Life Environment 2700K, 3000K, 4000K 100 Triac 50,000 hr Damp & Wet Location Trailing Edge Dimmer - Lutron Model Numbers : DVCL Series DVLV Series* Nova T NT Series Glyder GLV Series* Ariadni AYCL Series RadioRA 2 10ND Series* SLV Series SLV Series Contour CTCL Series Maestro Wireless MRF2-6ND Series* Lutron Homeworks RPM-4U* Lutron Homeworks QS HQRD-6ND Series* Homeworks QS HQRD-10ND Series* - Lutron Model Numbers : SureSlide 6633* Leading Edge Dimmer DVELV Series* SELV Series* Nova T NTELV Series* RadioRA RRD-6NA Series* Maestro MAELV Series* Maestro MRF2-6ELV Series* Grafik Eye PHPM-PA Series Homeworks QS HQRD-6ND Series*
21 PHOTOMETRIC REPORT 4 LED Recessed Retrofit-Kit with E26 and GU24 Base Adapter 4 LED HOUSING COMPATIBILITY AFR4 ETL Listed for installation in the following Lumtech E26 screw based 4 standard and shallow recessed housings; 4 : IH-410, IH-410R, IH-410ICA, FEH-V4ICA-GU24, FEH-V4ICAR-GU24 (GU24 base adapter only) AFR4 ETL Classifed for retrofit in the following 4 recessed housing; Halo : H99T, H99RT, H99ICT All-Pro : ET400, ET400R, ET400AT Juno : TC1, TC1R, IC1P Capril : R4, RR4, R4ASIC Lithonia : L3, L3R Thomas : PS4, PS4RM, PS4ASIC PHOTOMETRIC REPORT * Contact Factory for IES File Polar Candela Distribution CD: VA: [LED-AFR4] ft 4.0ft 6.0ft 8.0ft 10.0ft 12.0ft Illuminance at a Distance Center Beam FC Beam Width 82.5 fc 5 ft 20.6 fc 10 ft 9.2 fc 15 ft 5.2 fc 20 ft 3.3 fc 25 ft 2.3 fc 30 ft Beam Spread: ORDERING INFORMATION Retrofit Color Temp. Driver Trim finish LED-AFR4-27 : 2700K -30 : 3000K -40 : 4000K -DOB: 120V Driver on Board (dimmable with any Line or Low Voltage Dimmer) -BLANK : Standard White (consult factory for custom finish) Example : LED-AFR4-27-DOB Example : BLANK
22 LEDH-NCR5ICA-DOB 5 Line Voltage LED Recessed Housing with Baffle Trim Non-IC type New Construction or Remodel Application 5 LED 7-3/8 (187mm) 3-7/8 (98mm) DESCRIPTION DESIGN FEATURES 7-1/8 (181mm) 7-1/4 (184mm) Ceiling Cut-out : 5-1/2 5 aperture promotional LED housing with 120V, 12.8W AC LED Module, integral triac dimmable by most of leading and trailing edge dimmer switches in the market. The LEDH-NCR5ICA-DOB is designed for use in new construction or remodel applications with insulated ceilings. Thermally protected, Suitable for wet location. LED Module&Trim Durable die-casting aluminum heat sink with intergrated trim in one-piece. Module construction includes LED, heat sink, lens, baffle trim. White paint finish standard. Available in black baffle with white flange. Lens Impact-resistant plastic. High lumen transmission and diffusing for even illumination. Sealed for wet location to use in shower room. Mounting Provided plaster frame (7-1/8 x 7-1/8 ) for new construction. (2)mounting chips on trim module for use of remodeling version. HB-6 bar hangers are option to use of new contruction. SPECIFICATION LED Quantity 1EA (COB) Input Voltage 120V AC Wattage (+/-5%) 12.8 W Lu me n (+/-5%) 910 lm Efficacy (LPW) 70 lm/w Color (+/-5%) 2700K, 3000K, 4000K C R I (Typical) 80 Beam Angle 96.3 Dimming Triac Lamp Life 50,000 hr Environment Damp & Wet Location Electrical connection; J-box: - Installed on the top of fixture with (5)1/2 knockout. - Listed for through branch circuit wiring.(max. 4 No. 12 AWG 90 C Conductions.) - Ground wire provided. 120V LED Power Supply on-bed with customized IC chip % triac dimmable for most of leading and trailing edge Triac dimmer switches in the market. Patented (Pending in USA) driving circuit to prevent inrush current hurting switch and module. Recommended for use max. 45 fixtures per run of a dimmer switch 600W loaded and max. 23 fixtures per a dimmer switch 300W loaded. Packing 12 individual color box in master carton. Warranty 50,000hr of lamp life. Listing -ETL Listed. -State of california Title 24 -Energy star Approved & Listed Accessories Hanger bars for use with housing plate in new construction applications Trailing Edge Dimmer - Lutron Model Numbers : DVCL Series DVLV Series* Nova T NT Series Glyder GLV Series* Ariadni AYCL Series RadioRA 2 10ND Series* SLV Series SLV Series Contour CTCL Series Maestro Wireless MRF2-6ND Series* Lutron Homeworks RPM-4U* Lutron Homeworks QS HQRD-6ND Series* Homeworks QS HQRD-10ND Series* - Lutron Model Numbers : SureSlide 6633* Leading Edge Dimmer DVELV Series* SELV Series* Nova T NTELV Series* RadioRA RRD-6NA Series* Maestro MAELV Series* Maestro MRF2-6ELV Series* Grafik Eye PHPM-PA Series Homeworks QS HQRD-6ND Series* Consult tech. service or factory for additional dimmers
23 LED-AFR56 120V 5 & 6 LED Recessed Retrofit-Kit with E26 and GU24 Base Adapter 5 & 6 LED 2-11/16 (68mm) DESCRIPTION (Driver On Board) Module (Campcell ) LED with integral triac dimmable, and the optical diffusion produces high lumen transmission and DESIGN FEATURES 7-1/4 (184mm) The 6 Retrofit LED module & trim kit with E26 medium screw base for the 5 and 6 IC/Airtight and Non-IC incandescent recessed downlight and GU24 adapter for CFL housing. It s designed for use with Lumtech# IH-520ICA, IH-620ICA, IH-520, IH-620, shallow IH-640ICA, IH-640 and the remodeled including other compatible most 5 and 6 housings in the market, classified by ETL. High efficacy 120V DOB even illumination. Suitable for wet location. LED Module&Trim Durable die-casting aluminum heat sink with intergrated trim in one-piece. Module construction includes LED, heat sink, lens, baffle trim. white paint finish standard. Available in black baffle with white flange. Lens Impact-resistant plastic. High lumen transmission and diffusing for even illumination. Mounting Precise formed steel torsion spring bracket adjustable for position to fit 5 & 6 housings. Torsion spring fit compatible housing with torsion spring mounting tabs. Housing compatibility See Housing Compatibility section Electrical connection; E26 medium screw-base Edison connector provides easy retrofit of incandescent housing. Also available GU24 base connector for compact fluorescent housing. (Optional) 120V LED Power Supply on-bed with customized IC chip % triac dimmable for most of leading and trailing edge incandescent & low voltage dimmer switches. Patented (Pending in USA) driving circuit to prevent inrush current hurting switch and module. Recommended for use max. 45 fixtures per run of a dimmer switch 600W loaded and max. 23 fixtures per a dimmer switch 300W loaded. Warranty 50,000hr of lamp life. Listing -ETL Listed. -State of california Title 24 -Energy star Approved & Listed Consult tech. service or factory for additional dimmers SPECIFICATION LED Quantity 1EA (COB) Input Voltage 120V~277V AC Wattage (+/-5%) 12.8 W Lu me n (+/-5%) 910 lm Efficacy (LPW) 70 lm/w Color (+/-5%) 2700K, 3000K, 4000K C R I (Typical) 80 Beam Angle 96.3 Dimming Triac Lamp Life 50,000 hr Environment Damp & Wet Location Trailing Edge Dimmer - Lutron Model Numbers : DVCL Series DVLV Series* Nova T NT Series Glyder GLV Series* Ariadni AYCL Series RadioRA 2 10ND Series* SLV Series SLV Series Contour CTCL Series Maestro Wireless MRF2-6ND Series* Lutron Homeworks RPM-4U* Lutron Homeworks QS HQRD-6ND Series* Homeworks QS HQRD-10ND Series* - Lutron Model Numbers : SureSlide 6633* Leading Edge Dimmer DVELV Series* SELV Series* Nova T NTELV Series* RadioRA RRD-6NA Series* Maestro MAELV Series* Maestro MRF2-6ELV Series* Grafik Eye PHPM-PA Series Homeworks QS HQRD-6ND Series*
24 PHOTOMETRIC REPORT 5 & 6 LED Recessed Retrofit-Kit with E26 and GU24 Base Adapter 5 & 6 LED HOUSING COMPATIBILITY LED-AFR56 ETL Listed for installation in the following Lumtech E26 screw based 5 and 6 standard and shallow recessed housings; 6 : IH-620ICA, IH-620ICAR, IH-610, IH-610R, Shallow: IH-640ICA, IH-640ICAR, IH-640, IH-640R 5 : IH-520ICA, IH-520ICAR, IH-520, IH-520R LED-AFR56 ETL Classifed for retrofit in the following 5 and 6 recessed housing; Halo : H7ICAT, H7RICAT, H7ICT, H7RICT, H7ICATNB, H7ICTNB, H7T, H7RT,H7TNB, H7TCP, H7UICT,H7UICAT, H27ICAT, H27RICAT, H27ICT,H27RICT,H27T,H27RT, H5ICAT,H5RICAT, H5T,H5RT,H25ICAT All-Pro : 500AT, EI500RAT, ET500, ET500R, EI700AT, EI700RAT, E700ATNB, EI700, EI700R, EI700ATNB, EI700NB, ET700, ET700R, EI700U, EI700UAT, E2700AT, EI2700, EI2700R, ET2700, ET2700R Juno : IC22, IC22R, IC22W,IC22S,IC23, IC23W, IC21, IC21R, TC2, TC2R, IC20, IC20R, IC25, IC25R, IC25W, IC25S, TC20, TC20R Capril : CR1, pr1, QL1. R9ASIC Lithonia : L7X, L7XP Thomas : PS1, R9ASIC/PS9RM Prescolite : IBXS PHOTOMETRIC REPORT * Contact Factory for IES File Polar Candela Distribution CD: VA: [LED-AFR56] ft 4.0ft 6.0ft 8.0ft 10.0ft 12.0ft Illuminance at a Distance Center Beam FC Beam Width fc 4.5 ft 26.5 fc 8.9 ft 11.8 fc 13.4 ft 6.6 fc 17.9 ft 4.2 fc 22.3 ft 2.9 fc 26.8 ft Beam Spread: 96.3 ORDERING INFORMATION Housing Color Temp. Driver Trim Finish LED-AFR56-27 : 2700K -30 : 3000K -40 : 4000K -DOB: 120V Driver on Board (dimmable with any Line or Low Voltage Dimmer) -BLANK : Standard White (consult factory for custom finish) Example : LED-AFR56-30-DOB Example : BLANK
25 LEDH-RT56ICA 6 LED IC/AIR-TIGHT Recessed down light for new construction 6 LED 7-1/2" (190mm) 10-3/8" (263.5mm) 6-1/8" (157mm) 7-5/8" (193.6mm) DESCRIPTION LEDH-RT56ICA housing designed for use with a separate LED engine kit that is intergraled with heat sink and trims and compatible 6 LED trims. The This fixture offer easy and fast installation using a disconnect device and held securely in the housing with two pressure springs. DESIGN FEATURES Housing Single wall aluminum housing gasketed for IC/Air-Tight in insulated ceiling. Housing can be adjustable for ceiling thickness up to 1-1/4 LED Module&Trim Durable die-casting aluminum heat sink with intergrated trim in one-piece. (LED-AFR56) Module construction includes LED, heat sink, lens, baffle trim. white paint finish standard. Available in black baffle with white flange. Junction Box Listed for through branch circuit wiring.(max.8 No 12 AWG 90 C branch circuit conductors.) (5)1/2" knockouts with true pry-out slots and (4) knockouts with Romex cable clamp. Ground wire provided on J-box. Provided listed quick connectors for easy snap-in wires. (Optional) Bar Hangers 24 Bar Hangers provide stability and support on joists and T-Bar Grid ceilings. Housing can be positioned at any point within 24 joist span. Score lines allow tooless shortening for 12 joists. Lens Impact-resistant plastic. High lumen transmission and diffusing for even illumination. LED Engine Heat sink designed by computer simulation and aluminum board for low heat operation. Lumen Maintenance: L70/50, 70% lumens/50,000 hours Electrical connection; E26 medium screw-base Edison connector provides easy retrofit of incandescent housing. Also available GU24 base connector for compact fluorescent housing. (Optional) 120V LED Power Supply on-bed with customized IC chip % triac dimmable for most of leading and trailing edge incandescent & low voltage dimmer switches. Patented (Pending in USA) driving circuit to prevent inrush current hurting switch and module. Recommended for use max. 45 fixtures per run of a dimmer switch 600W loaded and max. 23 fixtures per a dimmer switch 300W loaded. Warranty 50,000hr of lamp life. Listing -ETL Listed. -State of california Title 24 -Energy star Approved & Listed 7-1/4" (184mm) Height : 7-1/2 Housing Aperture : 6-1/8 Ceiling Cut-out : 6-1/2 SPECIFICATION LED Quantity 1EA (COB) Input Voltage 120V AC Wattage (+/-5%) 12.8 W Lu me n (+/-5%) 910 lm Efficacy (LPW) 70 lm/w Color (+/-5%) 2700K, 3000K, 4000K C R I (Typical) 80 Beam Angle 89.7 Dimming Triac (Standard) Lamp Life 50,000 hr Environment Damp & Wet Location Trailing Edge Dimmer - Lutron Model Numbers : DVCL Series DVLV Series* Nova T NT Series Glyder GLV Series* Ariadni AYCL Series RadioRA 2 10ND Series* SLV Series SLV Series Contour CTCL Series Maestro Wireless MRF2-6ND Series* Lutron Homeworks RPM-4U* Lutron Homeworks QS HQRD-6ND Series* Homeworks QS HQRD-10ND Series* - Lutron Model Numbers : SureSlide 6633* Leading Edge Dimmer DVELV Series* SELV Series* Nova T NTELV Series* RadioRA RRD-6NA Series* Maestro MAELV Series* Maestro MRF2-6ELV Series* Grafik Eye PHPM-PA Series Homeworks QS HQRD-6ND Series* Consult tech. service or factory for additional dimmers
26 LEDH-RT56ICAR 6 LED IC/AIR-TIGHT Recessed down light for Remodeling 6 LED 12-3/4 (324mm) 7-1/2 (191mm) DESCRIPTION LEDH-RT56ICAR Remodel housing designed for use with a separate LED engine kit that is intergraled with heat sink and trims and compatible 6 LED trims. The This fixture offer easy and fast installation using a disconnect device and held securely in the housing with two pressure springs. Height : 7-1/2 DESIGN FEATURES Housing Single wall aluminum housing gasketed for IC/Air-Tight in insulated ceiling. 7-1/2 height allows se in 2 X 8 joist construction. LED Module&Trim Durable die-casting aluminum heat sink with intergrated trim in one-piece. (LED-AFR56) Module construction includes LED, heat sink, lens, baffle trim. white paint finish standard. Available in black baffle with white flange. Junction Box Listed for through branch circuit wiring.(max.8 No 12 AWG 90 C branch circuit conductors.) (5)1/2" knockouts with true pry-out slots and (4) knockouts with Romex cable clamp. Ground wire provided on J-box. Provided listed quick connectors for easy snap-in wires. (Optional) Remodel Clips 4 remodel clips secure housing and accommodates 1/2 and 5 /8 ceiling materials. Lens Impact-resistant plastic. High lumen transmission and diffusing for even illumination. LED Engine Heat sink designed by computer simulation and aluminum board for low heat operation. Lumen Maintenance: L70/50, 70% lumens/50,000 hours Electrical connection; E26 medium screw-base Edison connector provides easy retrofit of incandescent housing. Also available GU24 base connector for compact fluorescent housing. (Optional) 120V LED Power Supply on-bed with customized IC chip % triac dimmable for most of leading and trailing edge incandescent & low voltage dimmer switches. Patented (Pending in USA) driving circuit to prevent inrush current hurting switch and module. Recommended for use max. 45 fixtures per run of a dimmer switch 600W loaded and max. 23 fixtures per a dimmer switch 300W loaded. Warranty 50,000hr of lamp life. Listing -ETL Listed. -State of california Title 24 -Energy star Approved & Listed 6-1/8 (157mm) 7-1/4" (184mm) 3-7/8" (100mm) Ceiling Cut-out : 6-1/2 SPECIFICATION LED Quantity 1EA (COB) Input Voltage 120V AC Wattage (+/-5%) 13.6 W Lu me n (+/-5%) 898 lm Efficacy (LPW) 66 lm/w Color (+/-5%) 2700K, 3000K, 4000K C R I (Typical) 80 Beam Angle 89.7 Dimming Triac (Standard) Lamp Life 50,000 hr Environment Damp & Wet Location Trailing Edge Dimmer - Lutron Model Numbers : DVCL Series DVLV Series* Nova T NT Series Glyder GLV Series* Ariadni AYCL Series RadioRA 2 10ND Series* SLV Series SLV Series Contour CTCL Series Maestro Wireless MRF2-6ND Series* Lutron Homeworks RPM-4U* Lutron Homeworks QS HQRD-6ND Series* Homeworks QS HQRD-10ND Series* - Lutron Model Numbers : SureSlide 6633* Leading Edge Dimmer DVELV Series* SELV Series* Nova T NTELV Series* RadioRA RRD-6NA Series* Maestro MAELV Series* Maestro MRF2-6ELV Series* Grafik Eye PHPM-PA Series Homeworks QS HQRD-6ND Series* Consult tech. service or factory for additional dimmers
27 TRIM & PHOTOMETRIC REPORT For LEDH-RT56ICA(R) 6 LED ORDERING INFORMATION Housing Color Temp. Driver Trim Finish LEDH-RT56ICA LEDH-RT56ICAR -27 : 2700K -30 : 3000K -40 : 4000K -DOB: 120V Driver on Board (dimmable with any Line or Low Voltage Dimmer) -BLANK : Standard White (consult factory for custom finish) Example : LEDH-RT56ICA-27-DOB Example : BLANK
28 LED-AFC6 120V 6 LED Recessed Retrofit-Kit with E26 and GU24 Base Adapter 6 LED 4-5/16 (110.2mm) DESCRIPTION DESIGN FEATURES LED Module Durable aluminum extrusion heat sink intergrated with COB(chip on board). Inner reflector provide more light and beam distribution. Trim Available with baffle trims in white or black painted and clear or white reflectors. Lens Impact-resistant plastic. High lumen transmission and diffusing for even illumination. Mounting Precise formed steel torsion spring bracket adjustable for position to fit 6 housings. Torsion spring fit compatible housing with torsion spring mounting tabs. Easier trim installation by snap-on fit clip. Housing compatibility See Housing Compatibility section Warranty 50,000hr of lamp life. 7-9/16 (192mm) Electrical connection; E26 medium screw-base Edison connector provides easy retrofit of incandescent housing. Also available GU24 base connector for compact fluorescent housing. (Optional) 120V LED Power Supply on-bed with customized IC chip % triac dimmable for most of leading and trailing edge incandescent & low voltage dimmer switches. Patented (Pending in USA) driving circuit to prevent inrush current hurting switch and module. Recommended for use max. 45 fixtures per run of a dimmer switch 600W loaded and max. 23 fixtures per a dimmer switch 300W loaded. 5-11/16 (144mm) The 6 Retrofit LED module&trim kit with E26 medium screw base for the 6 IC/Airtight and Non-IC incandescent recessed downlight and GU24 adapter for CFL housing. It s designed for use with Lumtech# IH-620ICA, IH-620, shallow IH-640ICA, IH-640 and the remodeled including other compatible most 6 housings classified by ETL. High efficacy 120V DOB (Driver On Board) Module (Campcell ) LED with integral triac dimmable, and the optical diffusion produces high lumen transmission and even illumination. Suitable for damp location. SPECIFICATION LED Quantity 1EA (COB) Input Voltage 120V AC Wattage (+/-5%) 12.9 W Lu me n (+/-5%) 712 lm Efficacy (LPW) 55.2 lm/w Color (+/-5%) 2700K, 3000K, 4000K C R I (Typical) 80 Beam Angle 61.1 Dimming Triac Lamp Life 50,000 hr Environment Damp & Wet Location Trailing Edge Dimmer - Lutron Model Numbers : DVCL Series DVLV Series* Nova T NT Series Glyder GLV Series* Ariadni AYCL Series RadioRA 2 10ND Series* SLV Series SLV Series Contour CTCL Series Maestro Wireless MRF2-6ND Series* Lutron Homeworks RPM-4U* Lutron Homeworks QS HQRD-6ND Series* Homeworks QS HQRD-10ND Series* - Lutron Model Numbers : SureSlide 6633* Leading Edge Dimmer DVELV Series* SELV Series* Nova T NTELV Series* RadioRA RRD-6NA Series* Maestro MAELV Series* Maestro MRF2-6ELV Series* Grafik Eye PHPM-PA Series Homeworks QS HQRD-6ND Series* Listing -ETL Listed. -State of california Title 24 -Energy star Approved & Listed Consult tech. service or factory for additional dimmers TEL: FAX:
29 TRIM & PHOTOMETRIC REPORT 6 LED Recessed Retrofit-Kit with E26 and GU24 Base Adapter 6 LED HOUSING COMPATIBILITY LED-AFC6 ETL Listed for installation in the following Lumtech E26 screw based 6 standard and shallow recessed housings; 6 : IH-620ICA, IH-620ICAR, IH-610, IH-610R, Shallow: IH-640ICA, IH-640ICAR, IH-640, IH-640R LED-AFC6 ETL Classifed for retrofit in the following 6 recessed housing; Halo : H7ICAT, H7RICAT, H7ICT, H7RICT, H7ICATNB, H7ICTNB, H7T, H7RT,H7TNB, H7TCP, H7UICT,H7UICAT, H27ICAT, H27RICAT, H27ICT,H27RICT,H27T,H27RT All-Pro : EI700AT, EI700RAT, E700ATNB, EI700, EI700R, EI700ATNB, EI700NB, ET700, ET700R, EI700U, EI700UAT, E2700AT, EI2700, EI2700R, ET2700, ET2700R Juno : IC22, IC22R, IC22W,IC22S,IC23, IC23W, IC21, IC21R, TC2, TC2R, IC20, IC20R, TC20, TC20R Capril : CR1, pr1, QL1. R9ASIC Lithonia : L7X, L7XP Thomas : PS1, R9ASIC/PS9RM Prescolite : IBXS TRIMS LEDT-C64 Reflector haze clear reflector (-HC) white painted reflector (-WH) white plastic ring O.D : 7-1/16" (192mm) LEDT-C62 Baffle white or black baffle O.D : 7-1/16" (192mm) LEDT-C64-HC LEDT-C64-WH LEDT-C62-WH PHOTOMETRIC REPORT * Contact Factory for IES File Polar Candela Distribution CD: VA: [LED-AFC6] ft 4.0ft 6.0ft 8.0ft 10.0ft 12.0ft Illuminance at a Distance Center Beam FC Beam Width fc 3.1 ft 36.8 fc 6.1 ft 16.3 fc 9.2 ft 9.2 fc 12.3 ft 5.9 fc 15.3 ft 4.1 fc 18.4 ft Beam Spread: 74.9 ORDERING INFORMATION Retrofit Color Temp. Driver Trim Reflector finish Baffle & Metal Ring finish LED-AFC6-27 : 2700K -30 : 3000K -40 : 4000K -DOB: 120V Driver on Board (dimmable with any Line or Low Voltage Dimmer) LEDT-C64 LEDT-C62 -HC : haze clear -P R : pewter -CP : champane -WH: white painted -WH: white -BK : black -SN: satin nickel -AN: antique nickel -AC: antique copper -MO: mocha -C A: cappuccino -CH: chrome -UN: natural steel - P B : polished brass Example : LED-AFC6-27-DOB Example : LEDT-C64-HC-WH
30 LED-AF6E 120V 6 LED Recessed Retrofit-Kit with E26 and GU24 Base Adapter 6 LED 3-3/16 (80.6mm) DESCRIPTION 7-3/4 (196.5mm) 4-1/2 (114.9mm) The 6 eyeball Retrofit LED module&trim kit with E26 medium screw base for the 6 IC/Airtight and Non-IC incandescent recessed downlight and GU24 adapter for CFL housing. It s designed for use with Lumtech# IH-620ICA, IH-620, shallow IH-640ICA, IH-640 and the remodeled including other compatible most 6 housings classified by ETL. High efficacy 120V DOB (Driver On Board) Module (Campcell ) LED with integral triac dimmable, and the optical diffusion produces high lumen transmission and even illumination. Suitable for damp location. DESIGN FEATURES LED Module Durable aluminum extrusion heat sink incorporating with LED source. Adjustable lamp direction in 358 rotation and 0~30 tilt. Lens Impact-resistant plastic. High lumen transmission and diffusing for even illumination. Mounting Precise formed steel torsion spring bracket. Torsion spring fit compatible housing with torsion spring mounting tabs. Housing compatibility See Housing Compatibility section Electrical connection; E26 medium screw-base Edison connector provides easy retrofit of incandescent housing. Also available GU24 base connector for compact fluorescent housing. (Optional) 120V LED Power Supply on-bed with customized IC chip % triac dimmable for most of leading and trailing edge incandescent & low voltage dimmer switches. Patented (Pending in USA) driving circuit to prevent inrush current hurting switch and module. Recommended for use max. 45 fixtures per run of a dimmer switch 600W loaded and max. 23 fixtures per a dimmer switch 300W loaded. Warranty 50,000hr of lamp life. LED Quantity Input Voltage Wattage (+/-5%) Lu me n (+/-5%) Efficacy (LPW) Color (+/-5%) C R I (Typical) Beam Angle Dimming Lamp Life Environment SPECIFICATION 1EA (COB) 120V AC 13.1 W lm 57.3 lm/w 2700K, 3000K, 4000K Triac 50,000 hr Damp & Wet Location Trailing Edge Dimmer - Lutron Model Numbers : DVCL Series DVLV Series* Nova T NT Series Glyder GLV Series* Ariadni AYCL Series RadioRA 2 10ND Series* SLV Series SLV Series Contour CTCL Series Maestro Wireless MRF2-6ND Series* Lutron Homeworks RPM-4U* Lutron Homeworks QS HQRD-6ND Series* Homeworks QS HQRD-10ND Series* - Lutron Model Numbers : SureSlide 6633* Listing -ETL Listed. -State of california Title 24 Consult tech. service or factory for additional dimmers Leading Edge Dimmer DVELV Series* SELV Series* Nova T NTELV Series* RadioRA RRD-6NA Series* Maestro MAELV Series* Maestro MRF2-6ELV Series* Grafik Eye PHPM-PA Series Homeworks QS HQRD-6ND Series*
31 PHOTOMETRIC REPORT 6 LED Recessed Retrofit-Kit with E26 and GU24 Base Adapter 6 LED HOUSING COMPATIBILITY LED-AF6E ETL Listed for installation in the following Lumtech E26 screw based 6 standard and shallow recessed housings; 6 : IH-620ICA, IH-620ICAR, IH-610, IH-610R, Shallow: IH-640ICA, IH-640ICAR, IH-640, IH-640R LED-AF6E ETL Classifed for retrofit in the following 6 recessed housing; Halo : H7ICAT, H7RICAT, H7ICT, H7RICT, H7ICATNB, H7ICTNB, H7T, H7RT,H7TNB, H7TCP, H7UICT,H7UICAT, H27ICAT, H27RICAT, H27ICT,H27RICT,H27T,H27RT All-Pro : EI700AT, EI700RAT, E700ATNB, EI700, EI700R, EI700ATNB, EI700NB, ET700, ET700R, EI700U, EI700UAT, E2700AT, EI2700, EI2700R, ET2700, ET2700R Juno : IC22, IC22R, IC22W,IC22S,IC23, IC23W, IC21, IC21R, TC2, TC2R, IC20, IC20R, TC20, TC20R Capril : CR1, pr1, QL1. R9ASIC Lithonia : L7X, L7XP Thomas : PS1, R9ASIC/PS9RM Prescolite : IBXS PHOTOMETRIC REPORT * Contact Factory for IES File Polar Candela Distribution CD: VA: [LED-AF6E] ft 4.0ft 6.0ft 8.0ft 10.0ft 12.0ft Illuminance at a Distance Center Beam FC Beam Width fc 3.3 ft 29.6 fc 6.6 ft 13.2 fc 9.9 ft 7.4 fc 13.2 ft 4.7 fc 16.5 ft 3.3 fc 19.8 ft Beam Spread: 78.9 ORDERING INFORMATION Housing Color Temp. Driver Trim Finish Baffle Finish LED-AF6E -27 : 2700K -30 : 3000K -40 : 4000K -DOB: 120V Driver on Board (dimmable with any Line or Low Voltage Dimmer) -BLANK : Standard White (consult factory for custom finish) -WH: white -BK : black Example : LED-AF6E-30-DOB Example : BLANK-WH
32 LED-AF6AD 120V 6 LED Recessed Retrofit-Kit with E26 and GU24 Base Adapter 6 LED 3-5/16 (84.4mm) DESCRIPTION The 6 gimbal Retrofit LED module&trim kit with E26 medium screw base for the 6 IC/Airtight and Non-IC incandescent recessed downlight and GU24 adapter for CFL housing. It s designed for use with Lumtech# IH-620ICA, IH-620, shallow IH-640ICA, IH-640 and the remodeled including other compatible most 6 housings classified by ETL. High efficacy 120V DOB (Driver On Board) Module (Campcell ) LED with integral triac dimmable, and the optical diffusion produces high lumen transmission and even illumination. Suitable for damp location. DESIGN FEATURES 7-3/4 (196.5mm) 4-15/16 (125mm) LED Module Durable aluminum extrusion heat sink incorporating with LED source. Adjustable lamp direction in 358 rotation and 0~30 tilt. Lens Impact-resistant plastic. High lumen transmission and diffusing for even illumination. Mounting Precise formed steel torsion spring bracket. Torsion spring fit compatible housing with torsion spring mounting tabs. Housing compatibility See Housing Compatibility section Electrical connection; E26 medium screw-base Edison connector provides easy retrofit of incandescent housing. Also available GU24 base connector for compact fluorescent housing. (Optional) 120V LED Power Supply on-bed with customized IC chip % triac dimmable for most of leading and trailing edge incandescent & low voltage dimmer switches. Patented (Pending in USA) driving circuit to prevent inrush current hurting switch and module. Recommended for use max. 45 fixtures per run of a dimmer switch 600W loaded and max. 23 fixtures per a dimmer switch 300W loaded. Warranty 50,000hr of lamp life. LED Quantity Input Voltage Wattage (+/-5%) Lu me n (+/-5%) Efficacy (LPW) Color (+/-5%) C R I (Typical) Beam Angle Dimming Lamp Life Environment SPECIFICATION 1EA (COB) 120V AC 12.6 W lm 62.3 lm/w 2700K, 3000K, 4000K Triac 50,000 hr Damp & Wet Location Trailing Edge Dimmer - Lutron Model Numbers : DVCL Series DVLV Series* Nova T NT Series Glyder GLV Series* Ariadni AYCL Series RadioRA 2 10ND Series* SLV Series SLV Series Contour CTCL Series Maestro Wireless MRF2-6ND Series* Lutron Homeworks RPM-4U* Lutron Homeworks QS HQRD-6ND Series* Homeworks QS HQRD-10ND Series* - Lutron Model Numbers : SureSlide 6633* Listing -ETL Listed. -State of california Title 24 Consult tech. service or factory for additional dimmers Leading Edge Dimmer DVELV Series* SELV Series* Nova T NTELV Series* RadioRA RRD-6NA Series* Maestro MAELV Series* Maestro MRF2-6ELV Series* Grafik Eye PHPM-PA Series Homeworks QS HQRD-6ND Series*
33 PHOTOMETRIC REPORT 6 LED Recessed Retrofit-Kit with E26 and GU24 Base Adapter 6 LED HOUSING COMPATIBILITY LED-AF6AD ETL Listed for installation in the following Lumtech E26 screw based 6 standard and shallow recessed housings; 6 : IH-620ICA, IH-620ICAR, IH-610, IH-610R, Shallow: IH-640ICA, IH-640ICAR, IH-640, IH-640R LED-AF6AD ETL Classifed for retrofit in the following 6 recessed housing; Halo : H7ICAT, H7RICAT, H7ICT, H7RICT, H7ICATNB, H7ICTNB, H7T, H7RT,H7TNB, H7TCP, H7UICT,H7UICAT, H27ICAT, H27RICAT, H27ICT,H27RICT,H27T,H27RT All-Pro : EI700AT, EI700RAT, E700ATNB, EI700, EI700R, EI700ATNB, EI700NB, ET700, ET700R, EI700U, EI700UAT, E2700AT, EI2700, EI2700R, ET2700, ET2700R Juno : IC22, IC22R, IC22W,IC22S,IC23, IC23W, IC21, IC21R, TC2, TC2R, IC20, IC20R, TC20, TC20R Capril : CR1, pr1, QL1. R9ASIC Lithonia : L7X, L7XP Thomas : PS1, R9ASIC/PS9RM Prescolite : IBXS PHOTOMETRIC REPORT * Contact Factory for IES File Polar Candela Distribution CD: VA: [LED-AF6AD] ft 4.0ft 6.0ft 8.0ft 10.0ft 12.0ft Illuminance at a Distance Center Beam FC Beam Width fc 3.0 ft 33.2 fc 6.0 ft 14.8 fc 9.0 ft 8.3 fc 12.0 ft 5.3 fc 15.0 ft 3.7 fc 18.0 ft Beam Spread: 73.9 ORDERING INFORMATION Housing Color Temp. Driver Trim Finish LED-AF6AD -27 : 2700K -30 : 3000K -40 : 4000K -DOB: 120V Driver on Board (dimmable with any Line or Low Voltage Dimmer) -BLANK : Standard White (consult factory for custom finish) Example : LED-AF6AD-30-DOB
34
RESIDENTIAL GRADE
1 RESIDENTIAL GRADE LEDH-310ICA 3.5 Low Voltage LED IC Rated New Construction Recessed Housing MR16 LED Bulb 4-13/16 (123mm) 3-3/4 (95mm) Ceiling Cut-out : 3-7/8 Lamp, Max, Watt. : 12.2W The LEDH-310ICA
More informationRESIDENTIAL GRADE
1 RESIDENTIAL GRADE LEDH-310ICA 3.5 Low Voltage LED IC Rated New Construction Recessed Housing MR16 LED Bulb 4-13/16 (123mm) DESCRIPTION 3-3/4 (95mm) Ceiling Cut-out : 3-7/8 Lamp, Max, Watt. : 12.2W The
More informationORIGIN. Downlights. For New Construction & Remodeling. Commercial & Residential First Edition
ORIGIN Downlights 2017 First Edition For New Construction & Remodeling Commercial & Residential Contents Retrofits & Residential Retrofit Kits 6 standard reflector module 6 eyeball reflector module 5 7
More informationFLUSH MOUNT DISK LIGHT
7 www.lum-techlighting.com FLUSH MOUNT & DISK LIGHT CMED-605 DoB 5 Ceiling Puck CMED-607 DoB 7 Ceiling Puck [CMED-605 : 5 ] (5.5"dia. x 1") Ceiling Puck Ceiling Flush Mount [ CMED-607 : 7 ] (7"dia. x 1")
More informationMore LED retrofit options. New low price.
More LED retrofit options. New low price. Available in, 5 and 6 versions, with or without baffle. RABWEB.COM 888 722-000 LED RETROFITS Savings of up to $500 over 00,000 hrs* 2W replaces 90W PAR, 8W replaces
More informationLEDH-SR5C/SR5W/SR5P 5 COB LED Surface Cylinders.
LEDH-SR5C/SR5W/SR5P 5 COB LED Surface Cylinders. Catalog # Project Prepared by Type Date 5 LED Cylinder 7-7/8 (200mm) DESCRIPTION [Ceiling Mount : LEDH-SR5C] 5 aperture cylinder light, Provided in high
More informationDRD2 Recessed LED Downlight General Remodel 4", 5", 6" Aperture
PRODUCT SPECIFICATIONS Frame-in Kit HOUSING: Die-formed steel with powder coat finish (4" frame-in kit, 4" shallow frame-in kit), 20 ga. die-formed aluminum (5" frame-in kit), 22 ga. die-formed aluminum
More informationRL530-12W-120V-DIM-FL / RL507-12W-120V-DIM-FL Module LED - Elite Lighting Module LED Lighting Component
RL530-12W-120V-DIM-FL / RL507-12W-120V-DIM-FL Module LED - Elite Lighting Module LED Lighting Component UNIQUELY ENGINEERED FOR NEW AND EXISTING CONSTRUCTION The Elite Module LED has been engineered for
More informationFahrenheit DRD3 Adjustable LED Downlight Fire and Sound-Rated New Construction 4, 5, 6 Aperture
PRODUCT SPECIFICATIONS Frame-in Kit HOUSING: Fire and sound-rated housing. Up to 20 minute fire rated L500 (floor-ceiling) & P500 (roof-ceiling) design. Die formed #24 gauge galvanized steel construction.
More information- Replace existing can lights in new acoustical ceiling tiles in both basement bathrooms (see above for fixture type).
The Vets Box Office and Bathroom Refurbishment Addendum #1 Walk Through Question and Response September 21, 2017-2 Recessed can lights (LEDH-410ICA recessed housing with LT-42-BK Trim) and one (SLED 4818
More informationDRD1 Surface Mount or Recessed LED Downlight General New Construction 4, 5, 6 Aperture
PRODUCT SPECIFICATIONS All-in-one LED luminaire for retrofit, remodel, and new construction Slim, drawn aluminum construction Easy, tool-less installation for 4, 5 or 6 recessed housings 750 lumens of
More informationDRD3 Adjustable Recessed LED Downlight General New Construction 4, 5, 6 Aperture
PRODUCT SPECIFICATIONS 360 directional aim with up to 40 adjustable tilt Maximum installation compatibility Twist & Lock feature for easy trim installation 750 & 000 lumen outputs 2700K, 3000K, 3500K,
More informationLED RECESSED DOWNLIGHT MODULES
LED RECESSED DOWNLIGHT MODULES WHAT SETS US APART INNOVATION We combine the latest energy efficient technology and design styles to create an extensive range of attractive and sustainable luminaires. We
More informationAperture. Color Quality. 90+ CRI, 2-step SDCM. 2700K 3000K 3500K 4000K Spot (20 ) Narrow Flood (30 ) Flood (40 ) 4000cd (Spot 750 lm) Dimming
Project: Product Code: Type: Date: Spec Sheet V- 10.31.18 With multiple ratings, OneFrame is compliant in a wide range of situations Thanks to a unique low profile and small aperture design, OneFrame can
More informationOneFrame & DRD2 Recessed LED Downlight General New Construction DRDHNJD Deep Junction Box
PRODUCT SPECIFICATIONS Frame-in Kit JUNCTION BOX: Metallic outlet box certified UL514A up to 2 hour fire rating. DRDHNJD equipped with (8) trade size knockouts (four concentric side ( 3 /4" + 1 /2"), two
More informationOneFrame & DRD2 Recessed LED Downlight General New Construction DRDHNJD Deep Junction Box
PRODUCT SPECIFICATIONS Sound rated, architectural recessed LED downlight, 120/277V Twist & Lock feature for easy trim installation 750 & 1000 lumen outputs, powered by Cree 93+ CRI LEDs 2700K, 3000K, 3500K,
More informationDesigned to roll with the changes. Affordability and versatility make HALITETM. the modular downlight that adapts to you.
Designed to roll with the changes. Affordability and versatility make HALITETM the modular downlight that adapts to you. HALITETM Modular is putting it mildly. HALITE was designed to be both easily customized
More informationDRDHNJ Recessed LED Downlight General New Construction Junction Box
PRODUCT SPECIFICATIONS Frame-in Kit JUNCTION BOX: Metallic outlet box certified UL514A up to 2 hour fire rating. Equipped with (4) 1 /2 trade size knockouts (two side, two top) to allow straight conduit
More informationDRD2 Recessed LED Downlight General New Construction Junction Box PRODUCT SPECIFICATIONS
PRODUCT SPECIFICATIONS Frame-in Kit JUNCTION BOX: Metallic outlet box certified UL514A up to 2 hour fire rating. Equipped with (4) 1 /2" trade size knockouts (two side, two top) to allow straight conduit
More informationOneFrame & DRD2X Apex Series Recessed LED Downlight General New Construction DRDHNJD Deep Junction Box
PRODUCT SPECIFICATIONS Sound rated, architectural recessed LED downlight, 120/277V High performance Apex Series DRD2 Architectural-grade illumination produces up to 4000 candelas of focused light Precise,
More informationDRD2 Recessed LED Downlight Commercial New Construction 4", 6", 8" Aperture
PRODUCT SPECIFICATIONS Frame-in Kit MOUNTING FRAME: Die-cast aluminum. JUNCTION BOX: Galvanized steel. Equipped with (4) /2" and (2) 3 /4" knockouts with pryout slots to allow straight conduit runs. Approved
More informationRL430-10W-120V-DIM-FL / RL407-10W-120V-DIM-FL Module LED - Elite Lighting Module LED Lighting Component
RL430-10W-120V-DIM-FL / RL407-10W-120V-DIM-FL Module LED - Elite Lighting Module LED Lighting Component UNIQUELY ENGINEERED FOR NEW AND EXISTING CONSTRUCTION The Elite Module LED has been engineered for
More informationOneFrame & DRD4 Adjustable Recessed LED Downlight Concrete Tight New Construction DRDHNJC Deep Junction Box
PRODUCT SPECIFICATIONS Frame-in Kit JUNCTION BOX: Metallic outlet box certified UL514A up to 2 hour fire rating. Equipped with (4) trade size concentric knockouts ( 3 /4 + 1 /2 ) to allow straight conduit
More informationClassic Frame & DRD2X Apex Series Recessed LED Downlight Commercial Remodel 6", 8" Aperture
PRODUCT SPECIFICATIONS Frame-in Kit MOUNTING FRAME: Die-formed sheet metal. JUNCTION BOX: Galvanized steel. Equipped with (4) /2" and (2) 3 /4" knockouts with pryout slots to allow straight conduit runs.
More informationDRD2 Recessed LED Downlight General Retrofit Junction Box
PRODUCT SPECIFICATIONS Light Engine LED: Tightly binned, high performing white Cree LED. LUMEN OUTPUT (POWER): 750 Im (10.8W), 1000 lm (12.8W). COLOR QUALITY: 93+ CRI, 2-step SDCM. CCT OPTIONS: 2700K,
More informationDRD2X & OneFrame Concrete Apex Series Recessed LED Downlight
DRD2X & OneFrame Concrete Project: Product Code: Type: Date: Spec Sheet V- 10.31.18 Designed for high rise structures that require steel and concrete for reinforcement Features spot-welded areas and adaptations
More informationDRD2 & SurfaceFrame. Shallow Recessed LED Downlight JA8. New Construction. DRDHNJO Octagonal Junction Box
Project: Product Code: Type: Date: Spec Sheet V- 11.15.18 Features multiple ratings to meet the demands of a wide range of situations Ultra-low profile allows it to install in as little as 2" of ceiling
More informationOneFrame & DRD2 Recessed LED Downlight Concrete Tight New Construction DRDHNJC Deep Junction Box
PRODUCT SPECIFICATIONS Frame-in Kit JUNCTION BOX: Equipped with (4) trade size concentric knockouts ( 3 /4 + 1 /2 ) to allow straight conduit runs. Approved for 8 (four in, four out) #12 AWG C. MOUNTING:
More informationDRD2 Recessed LED Downlight Commercial New Construction 4, 6, 8 Aperture
PRODUCT SPECIFICATIONS Frame-in Kit MOUNTING FRAME: Die-cast aluminum. JUNCTION BOX: Galvanized steel. Equipped with (4) 1 /2 and (2) 3 /4 knockouts with pryout slots to allow straight conduit runs. Approved
More informationNIOB-2 2" BWF IOLITE TRIMS
NIOB-2 2" BWF IOLITE TRIMS New Construction or Remodel Housing Required Source: LED, 14 Watts, 8 Lumens Nora Lighting s 2" Iolite BWF trims are small aperture downlights that can be specified for use in
More informationDRD5S Surface Mount LED Downlight General Retrofit Junction Box
PRODUCT SPECIFICATIONS Light Engine LED: Optimized LED array delivers smooth, uniform illumination with no visible fasteners or dark spots. LUMEN OUTPUT (POWER): 750 Im (9.0W), 1000 lm (12.0W). SHAPE:
More informationNRM2-511 / NRM2-512 / NRM2-518
HIGH EFFICACY LED LIGHT SOURCE REQUIREMENTS ILLUMINATING THE FUTURE...SINCE 1989 NRM2-511 / NRM2-512 / NRM2-518 5" Marquise II Reflectors Marquise II COB Series enhances an established series of downlighting
More informationHALO H1499T. 4" RECESSED DOWNLIGHTING Incandescent
DIMENSIONS DESCRIPTION 4-1/2" [114mm] ceiling opening The is a small aperture low voltage housing for providing accent and task lighting. The is designed for use in non-insulated ceiling or for insulated
More informationHALO H7T. 6" RECESSED DOWNLIGHTING Incandescent
6" RECESSED DOWNLIGHTING Incandescent 6" Aperture Non-IC Ceiling 120V Line Voltage RECESSED DOWNLIGHTING Thermally Protected Housing Insulation must be kept 3" from all sides of the housing For use with
More informationRetrofit LED Basics Series. Economical 4", 5" and 6" LED Retrofit Trims
Retrofit LED Basics Series Economical 4", 5" and 6" LED Retrofit Trims Saves up to in energy costs when compared to 65W incandescent light source. Adaptive. Stylish. Diminutive. 2 Juno Lighting Group Juno
More informationDCC2 LED Cylinder Surface, Cord, Stem, Wall Mount
PRODUCT SPECIFICATIONS Luminaire LED: Tightly binned, high performing white Cree LED. LUMEN OUTPUT (POWER): 750 Im (.8W), 000 lm (4.7W), 500 lm (9.5W), 2000 lm (29.0W), 2 x 750 lm (23.6W), 2 x 000 lm (29.4W),
More informationProfessional-grade LED downlights
Professional-grade LED downlights High end. Low profile. Affordable price. RABWEB.COM 888 722-000 LED NEW CONSTRUCTION 2W replaces 75W R30, 20W & 26W replace 00W PAR Up to 856 lumens/7 LPW Dimmable down
More informationDRD5S. Surface Mount LED Downlight JA8. Retrofit Junction Box
Project: Product Code: Type: Date: Spec Sheet V- 11.15.18 Thinnest-in-class delivers the pure, smooth light and the elegant look of a high-end recessed downlight Extends just 0.6 inches below the ceiling
More information95+ CRI 90+ CRI 95+ CRI. Product Watts Color Temp CRI Version Driver Optional. 3G 3rd Gen
DESPTION The Novation shallow downlight has a height of just -/ inches with an adjustable housing that utilizes a heat pipe module that can tilt up to and rotate a full. W Output Performance Color Temperature
More informationDCC2 LED Cylinder Surface, Cord, Stem, Wall Mount
PRODUCT SPECIFICATIONS Surface, Cord, Stem or Wall mounting options Available in White, Black, Bronze, Brushed Aluminum or Custom Color finishes Decorative frosted trim available 750, 000, 500 or 2000
More informationDRD5S & SurfaceFrame. Surface Mount LED Downlight JA8. New Construction. DRDHNJO Octagonal Junction Box
New Construction Project: Product Code: Type: Date: Spec Sheet V- 11.15.18 Features multiple ratings to meet the demands of a wide range of situations Ultra-low profile allows it to install in as little
More informationHALO H5RICAT. 5" RECESSED DOWNLIGHTING Incandescent
DIMENSIONS DESCRIPTION The Halo H5 series utilizes a nominal 5" aperture designed to accommodate smaller sized PAR20 and PAR30 halogen lamps. The wide variety of trims available allows a number of different
More informationDCC2 LED Cylinder Surface, Cord, Stem, Wall Mount
PRODUCT SPECIFICATIONS Luminaire LED: Tightly binned, high performing white Cree LEDs enable excellent fixture to fixture color consistency and long lifetime. Delivers 93+ CRI in all available color temperatures.
More informationDCC2 LED Cylinder Surface, Cord, Stem, Wall Mount
PRODUCT SPECIFICATIONS Luminaire LED: Tightly binned, high performing white Cree LED. LUMEN OUTPUT (POWER): 750 Im (.8W), 000 lm (4.7W), 500 lm (9.5W), 2000 lm (29.0W), 750 / 750 lm (.8W /.8W), 000 / 000
More informationDCCX Apex Series Commercial LED Cylinder Surface, Cord, Stem, Wall Mount
PRODUCT SPECIFICATIONS Apex Series DCCX delivers vivid, accurate light in the form of a completely customizable cylinder Powered by the high-performance DRD2X module for a precise, targeted beam of low
More informationReflectors are compatible with respective Marquise I series housings manufactured by Nora Lighting.
HIGH EFFICACY LED LIGHT SOURCE REQUIREMENTS BATTERY PACK NRM-6 / NRM-62 / NRM-68 6" Marquise I Reflectors 6" Marquise Series with thermal management system combined in a single compact unit. Cree TrueWhite
More informationLCD4 4 LED Commercial Downlight
Catalog # : Project : Prepared By : Date : LCD4 4 inch LED new construction downlight delivers superior performance and energy efficiency. Designed to use anodized aluminum reflectors delivering even illumination
More informationLCD6 6 LED Commercial Downlight
Catalog # : Project : Prepared By : Date : LCD6 6 inch LED new construction downlight delivers superior performance and energy efficiency. Designed to use anodized aluminum reflectors delivering even illumination
More informationLCD8 8 LED Commercial Downlight
Catalog # : Project : Prepared By : Date : LCD8 8 inch LED new construction downlight delivers superior performance and energy efficiency. Designed to use anodized aluminum reflectors delivering even illumination
More information2000 LUMENS A3-LED. Submittal form is Tel: Fax:
UPTO 2 LUMENS DESCRIPTION: Achieve all of your lighting application objectives with only one universal high-performance architectural housing. The Fusion A3-LED is a 3 LED Universal Downlight that can
More informationNRM-511 / NRM-512 / NRM-518
HIGH EFFICACY LED LIGHT SOURCE REQUIREMENTS ILLUMINATING THE FUTURE...SINCE 1989 NRM-511 / NRM-512 / NRM-518 5" Marquise I Reflectors 5" Marquise Series with thermal management system combined in a single
More informationDCCX. Apex Series LED Cylinder JA8. Surface, Cord, Stem, Wall Mount. Product Code: Spec Sheet V
Project: Product Code: Type: Date: Spec Sheet V- 08.20.8 Apex Series DCCX delivers vivid, accurate light in the form of a completely customizable cylinder Powered by the high-performance DRD2X module for
More informationReflectors are compatible with respective Marquise II series housings manufactured by Nora Lighting.
HIGH EFFICACY LED LIGHT SOURCE REQUIREMENTS ILLUMINATING THE FUTURE...SINCE 1989 NRM2-611 / NRM2-612 / NRM2-618 6" Marquise II Reflectors 6" Marquise II reflectors includes Cree COB LEDs with optimized
More informationCatalog Number. Notes
. [ mm] Catalog Number FEATURES & SPECIFICATIONS INTENDED USE The " Wafer-Thin LED square recessed downlight with remote driver box combines high quality light output and efficiency while eliminating the
More informationNRM-411 / NRM-412 / NRM-413 / NRM-418 4" Marquise I Reflectors
HIGH EFFICACY LED LIGHT SOURCE REQUIREMENTS BATTERY PACK ILLUMINATING THE FUTURE...SINCE 989 NRM-4 / NRM-42 / NRM-43 / NRM-48 4" Marquise I Reflectors Source: W to 6W LED 850lm to 250lm 4" Marquise Series
More informationCatalog Number. Notes
. [ mm] Catalog Number FEATURES & SPECIFICATIONS INTENDED USE The " Wafer-Thin LED square recessed downlight with remote driver box combines high quality light output and efficiency while eliminating the
More informationCatalog Number. Notes
Catalog Number FEATURES & SPECIFICATIONS INTENDED USE The " Wafer-Thin LED square recessed downlight with remote driver box combines high quality light output and efficiency while eliminating the pot light
More information2 LED downlight. Discreet styling, bold performance. RABWEB.COM
2 LED downlight Discreet styling, bold performance. RABWEB.COM 888 722-1000 Clean, unobtrusive design delivers smooth and abundant light from an aperture just over 1 inch wide. 8W replaces 50W MR16 with
More informationHALO H99ICT. 4" RECESSED DOWNLIGHTING Incandescent
DIMENSIONS DESCRIPTION The is a small aperture housing for accent and task lighting. The is designed for use in insulated ceilings where it will be in direct contact with insulation. It is an IR-TITE housing
More informationLAD8R - Remodel 8 LED Architectural Downlight
Catalog # : Project : Prepared By : Date : LAD8R - Remodel 8 inch Remodel LED downlight delivers superior performance and energy efficiency. Designed to use anodized aluminum reflectors delivering even
More information"Quick Connect" Connectors materials.. Socket. Remodel Clips. Transformer. Support Spring
4 perture Shallow Ceiling Remodel ousing 12V Low Voltage MR16 alogen RECESSED DOWNLIGTING Thermally Protected Non-IC Shallow Ceiling Low Voltage Remodel ousing Integral magnetic Transformer Insulation
More informationLAD6 6 LED Architectural Downlight
Catalog # : Project : Prepared By : Date : LAD6 6 inch LED new construction downlight delivers superior performance and energy efficiency. Designed to use anodized aluminum reflectors delivering even illumination
More informationTrack Light. LIFETIME: 50,000 hours at 70% lumen maintenance. PHOTOMETRIC TESTING: Tested in accordance to IESNA LM
PRODUCT SPECIFICATIONS Track Light LED: Tightly binned, high performing white Cree LED. LUMEN OUTPUT (POWER): 900 lm (16.6W). CRI: 90+. CCT: 2700K, 3000K, 3500K, 4000K. BINNING: Color variation within
More informationLAD6R - Remodel 6 LED Architectural Downlight
Catalog # : Project : Prepared By : Date : LAD6R - Remodel 6 inch LED remodel downlight delivers superior performance and energy efficiency. Designed to use anodized aluminum reflectors delivering even
More informationML56 LED Lighting System
ML56 LE Lighting System 600 / 900 / 1200 Series Shown: 1200 Series with optional NFL optic. The Halo ML56 Series offers high performance LE downlighting that sets a new industry high point for recessed
More informationHALO H7ICAT. 6" RECESSED DOWNLIGHTING Incandescent
DIMENSIONS DESCRIPTION 6 1/2" [165mm] The H7 recessed housing is the standard in the industry for both commercial and residential applications. The wide variety of trims available allows a number of different
More informationLAD8 8 LED Architectural Downlight
Catalog # : Project : Prepared By : Date : LAD8 8 inch LED new construction downlight delivers superior performance and energy efficiency. Designed to use anodized aluminum reflectors delivering even illumination
More information3" LED SPECIFICATIONS ULTRA SHALLOW FIXED DOWNLIGHT
Small aperture LED downlight with architectural appearance housed in an ultra-shallow " above the ceiling housing. LED module and optics are modular for ease of replacement. Wood ceiling option allows
More informationCIRRUS SUSPENSION WALL WASH WITH REMOTE POWER, END FEED
Adjustable Max. 5 ft. Description Cirrus Suspension Wall Wash with Remote 24VDC power supply (sold separately) is a linear LED fixture that offers a wall wash lens for a smooth and uniform beam spread.
More informationLAD4 4 LED Architectural Downlight
Catalog # : Project : Prepared By : Date : LAD4 4 inch LED new construction downlight delivers superior performance and energy efficiency. Designed to use anodized aluminum reflectors delivering even illumination
More information800 TO 9000 LUMEN 8 LED SILENT CEILING DOWNLIGHT HYPERBOLIC OPEN APERTURE L8 SERIES
ENVIRONMENTALLY FRIENDLY, ENERGY EFFICIENT Lumen packages suitable for ceiling heights ranging from 8 to over 100 Efficacies up to 109 lm/w Superior-quality white LED light output using Chip on Board technology
More informationNIO-4RTL / NIO-4STL 4" Iolite Trimless Reflectors (New Construction only)
HIGH EFFICACY LED LIGHT SOURCE REQUIREMENTS ILLUMINATING THE FUTURE...SINCE 1989 NIO-4RTL / NIO-4STL 4" Iolite Trimless Reflectors (New Construction only) Source: 14W LED 800lm or 1000lm PRODUCT DESCRIPTION
More information90+ CRI 95+ CRI 95+ CRI 95+ CRI 90+ CRI 95+ CRI
DESPTION 3 LED dedicated IC downlight with precision aiming and punchy, smooth beams SPECIFICATIONS Watts: 23W/14W Volts: 120-277 VAC : 90 or 95 Color consistency: 2-step binning LEDs Life: > 61,000 hours
More informationMXG2DRTR 3.5 MX G2 LED Lensed Downlight - Wet Location
MXG2DRTR 3.5 MX G2 LED Lensed Downlight - Wet Location ELECTRICAL DATA LED Light Engine System Wattage * CCT / CRI Delivered Lumens ** Lumens Per Watt L0 L1 L2 L3 10W 16W 20W 26W * System Wattage includes
More informationSPECFIT 6" Retrofit Downlight AD6 DIM010 UNV ADR6. Project: Part#: Type: Ex: AD6-LES-9040-DIM010-UNV-MD-ADR6-CC
Project: Part#: Type: SPECFIT " Retrofit Downlight Mechanical SPECFIT retrofits existing commercial housings. Spring action clips to accommodate ½ to ceiling thicknesses. Fixture with remote driver installs
More informationSPECFIT 8" Retrofit Downlight AD8 DIM010 UNV ADR8. Project: Part#: Type: Ex: AD8-LES-9040-DIM010-UNV-MD-ADR8-CC
Project: Part#: Type: SPECFIT " Retrofit Downlight Mechanical SPECFIT retrofits existing commercial housings. Spring action clips to accommodate ½ to 2 ceiling thicknesses. Fixture with remote driver installs
More informationDCC2. LED Cylinder JA8. Surface, Cord, Stem, Wall Mount
Project: Product Code: Type: Date: Spec Sheet V- 2.0.8 The cylinder s combination of precise illumination and refined aesthetics can take your designs to new heights Available in a range of form factors,
More informationDCD2 Recessed LED Downlight Commercial New Construction 4", 6", 8" Aperture
PRODUCT SPECIFICATIONS Frame-in Kit MOUNTING FRAME: Die-cast aluminum. JUNCTION BOX: Galvanized steel. Equipped with (4) /2" and (2) 3 /4" knockouts with pryout slots to allow straight conduit runs. Approved
More informationR6NC 6" LED Recessed Downlight: Universal New Construction Housing
Specifications/Features Housing/Mounting Specification grade 6" housing, 6-1/2" aperture. 6-5/8" Ceiling opening. 16 Gauge galvanized steel housing with die-cast aluminum heat sink. Requires minimum 3"
More informationCatalog # Project. Comments. Prepared by MAX HEIGHT (SEE TABLE) NARROW 5-15/16" [151mm] 5-15/16" [151mm] 7-11/16" [195mm]
ESCRIPTION 6-inch recessed LE for international, remodel or retrofit applications. Offered with narrow, medium, or wide beam reflectors designed for glare free even illumination. Featuring a two-stage
More informationMXG2DSTL 3.5 MX G2 LED Square Trimless Lensed Downlight - Wet Location
MXG2DSTL 3.5 MX G2 LED Square Trimless Lensed Downlight - Wet Location ELECTRICAL DATA LED Light Engine System Wattage * CCT / CRI Delivered Lumens ** Lumens Per Watt 1 1/2 L0 L1 L2 L3 10W 16W 20W 26W
More informationCylindrix III. Recessed Multiples
Features Cylindrix III Recessed LED, the best combination of optical and thermal performance, aesthetics and visual comfort in an recessed accent. Features a deeply recessed single LED light source for
More informationLED Retrofit Collection RL and RA Series
LED Retrofit Collection RL and RA Series RL4 Series Up to 700 lumens (lumens per selected CCT and CRI) Use to replace 60W PAR16, 50W PAR20 or 40W R20 lamp 2700K, 3000K, 3500K, 4000K, 5000K Correlated Color
More informationThe RSQ LED Series provides continuous dimming with reverse or forward phase cut dimmers.
RSQ All-Purpose Square Lens LED Modules Dimming Guide and Step-down Transformer Application Note HALO The RSQ LED Series provides continuous dimming with reverse or forward phase cut dimmers. RSQ4 RSQ5
More informationStepdown Transformer, 277V to 120V, 300VA. 3.5 IN Length 5.75 IN Width IN Height
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 Step Down Transformer Eaton Lighting Catalog Number Manufacturer Weight per unit Product Category Features amperage rating
More informationPRODUCT SPECIFICATIONS
ENVIRONMENTALLY FRIENDLY, ENERGY EFFICIENT One fixture converts nearly any manufacturers incandescent, CFL or H.I.D. fixtures with a rough-in inner diameter of 7-5 /8 to 8-1 /8 diameter to high efficiency
More informationDCD1 Recessed LED Downlight Commercial New Construction 4, 6, 8 Aperture
PRODUCT SPECIFICATIONS Frame-in Kit MOUNTING FRAME: Die-cast aluminum. JUNCTION BOX: Galvanized steel. Equipped with (4) 1 /2 and (2) 3 /4 knockouts with pryout slots to allow straight conduit runs. Approved
More informationNOVA suspension up and down, end feed with remote power supply
Shown without Louver Shown with White Louver Description Nova Suspension Up/Down is a linear LED lighting 2 circuit system that features both direct and indirect light. This contemporary system allows
More information4" LED SPECIFICATIONS LOW-PROFILE ADJUSTABLE DOWNLIGHT
LED This specification grade low-profile adjustable LED downlight delivers high performance for ultra-shallow ceiling plenum installations while maintaining a beautiful architectural ceiling appearance.
More informationCylindrix III. Recessed Multiples
Features Cylindrix III Recessed LED, the best combination of optical and thermal performance, aesthetics and visual comfort in an recessed accent. Features a deeply recessed single LED light source for
More informationDCCX. Apex Series LED Cylinder JA8. Surface, Cord, Stem, Wall Mount
Project: Product Code: Type: Date: Spec Sheet V- 2.0.8 Apex Series delivers vivid, accurate light in the form of a completely customizable cylinder Powered by the high-performance DRD2X module for a precise,
More informationMXG2DSTR 3.5 MX G2 LED Square Downlight
MXG2DSTR 3.5 MX G2 LED Square Downlight ELECTRICAL DATA LED Light Engine System Wattage * CCT / CRI Delivered Lumens ** Lumens Per Watt L0 L1 L2 L3 10W 16W 20W 26W * System Wattage includes driver and
More informationMXG2DRTR 3.5 MX G2 LED Downlight
MXG2DRTR 3.5 MX G2 LED Downlight ELECTRICAL DATA LED Light Engine System Wattage * CCT / CRI Delivered Lumens ** Lumens Per Watt L0 L1 L2 L3 10W 16W 20W 26W * System Wattage includes driver and LED Module
More informationCIRRUS CEILING WALL WASH WITH REMOTE POWER
0.9" 0.9" CIRRUS CEILING WALL WASH (ACTUAL SIZE) CIRRUS CEILING WALL WASH LENS (ACTUAL SIZE) DESCRIPTION At 7.3 or 9.6 watts per foot, Cirrus Channel Wall Wash contains 85+ or 95+ CRI LEDs. Fixture mounts
More informationHigh Performance LED LIGHTING SOLUTIONS PAR30 PAR20
+ PAR30 High Performance LED LIGHTING SOLUTIONS + PAR20 1 I www.lightages.com 2 LIGHTING SCIENCE HIGH PERFORMANCE LED // www.lsgc.com HIGH PERFORMANCE LED LIGHTING SOLUTIONS TABLE OF CONTENTS INTRODUCTION...
More informationRemodeler. Complete product = Frame-in kit + Adjustable light engine / Trim Order each separately
New construction Downlighting Project: Location: Cat.No: LyteCaster Remodeler Type: Lamps: Notes: Qty: Round adjustable Philips Lightolier LyteCaster LED Adjustable Downlight is a low cost solution for
More informationDownlighting. LyteCaster. Complete product = Frame-in kit + Light engine + Trim Order each separately. 3" Accent square downlight 800 Lumens
Downlighting LyteCaster Project: Location: Cat.No: Type: Lamps: Notes: Qty: " square downlight 8 Lumens Philips Lightolier LyteCaster LED downlights feature a." luminaire height that conserves plenum space
More informationProject. Comments. Prepared by
DESCRIPTION Recessed 6-inch LED wall washer is available in various lumen and CRI/CCT options. Suitable for commercial construction and can be used for both new or renovation work. Insulation must be kept
More information0.25" (0.64cm) Grip Jack Connector 2WDC WDC Lumen values are based on the 3000K LED test.
0.25" (0.64cm) Grip Jack Connector Field Adjustable with Grip Jack Connector Adjustable Max. 5 ft. Description: Cirrus Channel Suspension D1 features a direct flat lens with 100 degree beam spread. At
More informationRemote Power Supplies * & Dimmers (Sold Separately): Electronic Low Voltage Dimming (ELV) 0-10 Volt Dimming (0-10V) Lutron
0.25" (0.64cm) Grip Jack Connector Field Adjustable with Grip Jack Connector Adjustable Max. 5 ft. 0.9" 0.35" (0.9cm) 0.9" 0.38" (0.95cm) Description: Cirrus Channel Suspension Wall Wash uses a wall wash
More information