NanoLED NXT Cylinder LNRP3 Pendant

Transcription

1 NXT NANOLED PENDANT - NANOLED PENDANT - CONDUIT CUTOUT NANOLED GLOW /cylinders Power and beauty are both in play with our sleek architectural cylinders. Concealing the same powerful LED technology of our downlight series, the offers a beautiful solution for open or inaccessible ceilings and architectural accents now with the option to include decorative opal glass. FEATURES Powerful performance architectural lighting solution for residential, hospitality and commercial spaces. Rigid pendant stem with 30º hang straight feature and field-cuttable cable mount options. Optional decorative opal glass perfect for projects where a beautiful yet functional solution is needed. Convenient conduit cutout canopy mounting option for attachment to surface-mounted junction boxes and conduit in industrial or exposed concrete ceiling types where recessed wiring is not an option Remote driver options and emergency battery packs for ease of service NANOLED NXT CYLINDER PERFORMANCE DATA DELIVERED* PERFORMANCE: 14W Classic 20W Rendering Index: Source Lumens: Performance Lumens Per Watt: Delivered Lumens: Glow Performance Lumens Per Watt Delivered Lumens *Performance data based on 3000K, 80+ CRI CORRELATED COLOR TEMPERATURE 2700K Classic 3000K 3500K 4000K Rendering Index: Multiplier for Lumen Page 1 info@

2 NXT DIMENSIONS RECESSED J-BOX CANOPY (C1, C2, C3) (P1, P2, P3) 24, 48 or 9 length. Matches. 7/1Ø for D2 RECESSED BOXES 5 Ø finish increments (- 95 ) 5 Ø CONDUIT CUTOUT CANOPY FOR SURFACE MOUNTED J-BOX (CJ1, CJ2, CJ3) (PJ1, PJ2, PJ3) , 48 or 9 length. Matches. 7/1Ø for D2 SURFACE MOUNTED BOXES AND CONDUIT finish increments (- 95 ) Page 2 info@

3 NXT with Glow DIMENSIONS RECESSED J-BOX CANOPY (C1, C2, C3) (P1, P2, P3) 24, 48 or 9 length. Matches. 7/1Ø for D2 RECESSED BOXES finish increments (- 95 ) 2 or Glow 2 or Glow 2 or CONDUIT CUTOUT CANOPY FOR SURFACE MOUNTED J-BOX (CJ1, CJ2, CJ3) (PJ1, PJ2, PJ3) , 48 or 9 length. Matches. 7/1Ø for D2 finish increments (- 95 ) 2 or Glow SURFACE MOUNTED BOXES AND CONDUIT 2 or Glow 2 or 2 or info@ Page 3

4 HOW TO SPECIFY NXT with Integral Driver Specify fixture part number. All boxes must be filled in to correctly order. ORDERING INFORMATION Wattage Front Cap GLOW * Length LED Temperature Beam Lens Mounting Voltage Dimming Driver Diameter 9014-M2 14W LED 9020-M2 20W LED G2 2 Opal G3 Opal *Note: If no glass is desired, leave blank length Classic 27KS 2700K, 80+ CRI 27KH 2700K, 90+ CRI 30KS 3000K, 80+ CRI 30KH 3000K, 90+ CRI 35KS 3500K, 80+ CRI 40KS 4000K, 80+ CRI beam beam beam beam SOC Solite Clear (provided standard) SOF Solite BOC Clear BOF AS61 Linear Spread 1 Not available with G2 or G3 glass option Cutout Style PJ1-24 length* PJ length* PJ length* Style P1-24 length* P length* P length* Cutout Style 120V 277V DIML2 0-V dim, % (provided standard) DIM19 Phase Dimming 1%, 120V only DIML2 0-V dim, % CJ1 24 length CJ2 48 length CJ3 9 length Style C1 24 length C2 48 length C3 9 length *Specify exact stem length in accessory table below PENDANT MOUNT ACCESSORY (order seperately) Type Length Mount 1/2 Diameter P1-24 P P length from -24 in 1 increments length from length from NOTE: Specify for P Rigid Mounting. Accessory does not need to be ordered for C Cable Mount Page 4 info@

5 HOW TO SPECIFY NXT with Remote Driver 1. Specify fixture part number. All boxes must be filled in to correctly ORDERING INFORMATION RM Diameter RPB-01 Remote Power Supply RPB-01 Remote Power Supply Wattage 9014-M2 14W LED 9020-M2 20W LED Fixture Wattage 14M2 14W LED 20M2 20W LED Front Cap Voltage 2. Specify Remote Power Supply UNV 120V - 277V 120V 120V Only GLOW * G2 2 Opal G3 Opal *Note: If no glass is desired, leave blank Length 06 length length Remote Dimming Type and Level D2 TR 0-V, % D4 Lutron 3-wire/ECO, 1% D4E Lutron 5 ECO, 5% D4H Lutron H ECO, 1% Fade D6A EldoLED 0-V, 0.1% D6B EldoLED 0-V, 0.1% D6E EldoLED 0-V, 1% D6F EldoLED 0-V, 1% D7 EldoLED DALI, 0% D8 EldoLED DMX, 0% D3 Lutron 2-wire, 1% D19 Hatch Phase 2-wire, 1% LED Temperature Classic 27KS 2700K, 80+ CRI 27KH 2700K, 90+ CRI 30KS 3000K, 80+ CRI 30KH 3000K, 90+ CRI 35KS 3500K, 80+ CRI 40KS 4000K, 80+ CRI Beam beam beam beam beam Remote Emergency Option EM7 EM battery requires remote enclosure by others, minimum size 14.5 L x 6.5 W x H NOTE: Remote Power Supplies Require Enclosures by Others. See Page 6 for Details. 3. Specify Accessory (required for rigid stem only) Lens SOC Solite Clear (provided standard) SOF Solite BOC Clear BOF AS61 Linear Spread 1 Not available with G2 or G3 glass option Mounting Cutout Style PJ1-24 length* PJ length* PJ length* Style P1-24 length* P length* P length* Cutout Style CJ1 24 length CJ2 48 length CJ3 9 length Style C1 24 length C2 48 length C3 9 length *Specify exact stem length in accessory table below Remote Power Supply RM Remote Power Supply (Specify in table below) USAI Power Supply Must Be Specified Type Length Mount 1/2 Diameter P1-24 P P length from -24 in 1 increments length from length from NOTE: Specify for P Rigid Mounting. Accessory does not need to be ordered for C Cable Mount Page 5 info@

6 NXT NANOLED NXT CYLINDER PENDANT SPECIFICATIONS FIELD REPLACEABLE LED LIGHT ENGINE Light engine is serviceable without tools. All USAI Lighting light engines feature industry-leading color consistency. FIELD REPLACEABLE DRIVER Solid state electronic, 0-V, % dimming driver with a high power factor provided standard. Specify 120V or 277V. Driver complies with IEEE C62.41 surge protection. Some on-time delay may be experienced depending on control system used. REMOTE LOCATION DRIVER long cylinder requires remote power supply. If a remote dimming driver is required, specify RM in the fixture part number and proceed to the RP table to complete the dimming driver specification. All remote power supplies must be clearly in the RP table, with one remote power supply required per fixture. Remote power supplies require enclosures by others that meet local codes and must be located in an accessible service panel within 0ft of the light fixture; see table below for coordination of enclosure sizes. All dimming drivers comply with IEEE C62.41 surge protection. REMOTE LOCATION EMERGENCY Remote emergency battery IOTA ILB-CP07 provides 200mA to one fixture for 90 minutes. Remote power supplies with EM option require an enclosure with minimum size of 14.5 L x 6.5 W x H by others that meets local codes. NANOLED CYLINDER REMOTE POWER SUPPLY REQUIREMENTS AND WIRING DIAGRAM Minimum Enclosure Size Required Remote Power Supply Dimming Option Wire Gauge Required* RP Only RP with EM Option** UNV-D2 TR 0-V dim, % 14/12 7 W x L x 2 H UNV-D4 Lutron 3-wire/ECO, 1% RPB-01-14M2 UNV-D4E Lutron 5 ECO, 5% RPB-01-20M2 UNV-D4H Lutron H ECO, 1% fade 14/12 UNV-D6A EldoLED 0-V, 0.1% UNV-D6B EldoLED 0-V, 0.1% UNV-D6E EldoLED 0-V, 1% 18/ W x 4 L x 2 H 14.5 W x 6.5 L x H UNV-D6F EldoLED 0-V, 1% UNV-D7 EldoLED DALI, 0% UNV-D8 EldoLED DMX, 0% 120V-D3 Lutron 2-wire phase, 1% 14/12 120V-D19 Hatch 2-wire phase, 1% 14/ W X L X 2 H * Wire gauge 14/12 = Maximum distance from light fixture to remote power supply is 0 using 12 gauge wire, 50 using 14 gauge wire. * Wire gauge 18/16 = Maximum distance from light fixture to remote power supply is 0 using 16 gauge wire, 50 using 18 gauge wire. ** Emergency battery remote power supplies cannot be located any more than 50 feet from light fixture. HOMERUN USE FOR WIRING WIRING FIXTURES REQUIRED MDF02M DP02 MDF04M DP04 MDF06M MDF08M DP06 DP08 INPUT WIRES RP2 RPB REMOTE POWER SUPPLY + - A DIMMING COMPATIBILIT ATIBILITY SEE SHEET DIMMING FOR DETAILS COMPATIBILTY SHEETS FOR DETAILS + - FIXTURE BODY Ø extruded aluminum body available in or length. body and cap are available in a variety of powder coated paint finishes or an anodized satin nickel finish. colors also available (provide #). and cap finish may be separately. FRONT CAP Standard cylinder is provided with threaded extruded aluminum assembly retaining 1 regress solite lens in front cap finish. If decorative opal Glow glass option is, the assembly is fitted with a decorative opal glass cylinder available in 2 or length. Page 6 info@

7 NXT NANOLED NXT CYLINDER PENDANT SPECIFICATIONS MOUNTING Hardware included for mounting to 4 octagonal junction box. PENDANT STEM MOUNT 1/2 Ø (1/4 IPS) steel stem is provided cut to length with 30 hang straight. finish and length (in 1 increment) in accessories table when ordering; stem is not field cuttable. round x deep canopy is finish matching for mounting to recessed mounted junction box. Please contact factory if a different canopy color is desired. 1/4 Ø or 7/1 Ø braided cable, field cuttable, and 4-5/8 Ø x deep round canopy are finish to match cylinder. Select from three field cuttable cable lengths in ordering table. Please contact factory if a different power cable and canopy finish is desired. RECESSED JBOX CANOPY: If recessed J-box canopy style is (P1, P2, P3 or C1, C2, C3 options) or round x deep canopy is provided for mounting to recessed mounted junction box. Recessed jbox canopy is matching finish per fixture specification. CONDUIT CUTOUT CANOPY: If J canopy is, round x 2- deep canopy is provided for mounting to standard 4 octagonal surface mounted junction box. cutout canopy has 4 keyslots, one in each side, and ships with three conduit cutout keys and three solid cover keys which are field interchangeable and can be configured to accommodate any ceiling layout using ½ or ¾ conduit. cutout canopy is matching finish per fixture specification. CONDUIT CUTOUT MOUNTING EXAMPLE End Straight L T 4 OCTAGONAL BOX DETAIL KEY COVER DETAIL 3-1/2 1-1/2 SOLID COVER KEY CONDUIT CUTOUT KEY 3-1/2 4 4"Ø X 1-1/2" Deep Octagon J-Box 3 provided with each Cutout 3 provided with each Cutout FIXTURE WEIGHT weighs 3 lbs (not including rigid pendant stem accessory). WARRANTY Based on IEA LM , has a 50,000 hour rated life at 70% lumen maintenance (L70). USAI Lighting Warranty covers replacement parts for 5 years from date of shipment. Warranty is void if USAI is used with any power supply other than that which is provided by USAI. LISTINGS Dry/Damp. NRTL/CSA-US tested to UL standards. IBEW union made. NOTES Ambient temperatures at fixture location should not exceed 40 C during normal operation. For interior use only PHOTOMETRICS Consult factory or website for IES files. Tested in accordance with IEA LM Page 7 info@