NanoLED NXT Cylinder LNRP3 Pendant

Transcription

1 Nano NXT Cylinder LNRP3 Pendant NANO PENDANT - NANO PENDANT - 6 WITH CONDUIT CUTOUT NANO GLOW usailighting.com/cylinders Power and beauty are both in play with our sleek architectural cylinders. Concealing the same powerful technology of our Nano downlight series, the Nano Cylinder offers a beautiful solution for open or inaccessible ceilings and architectural accents now with the option to include decorative opal glass. FEATURES Powerful performance architectural lighting solution for residential, hospitality and commercial spaces. Rigid pendant stem with 30º hang straight feature and field-cuttable cable mount options. Optional decorative opal glass perfect for projects where a beautiful yet functional solution is needed. Convenient conduit cutout canopy mounting option for attachment to surface-mounted junction boxes and conduit in industrial or exposed concrete ceiling types where recessed wiring is not an option Remote driver options and emergency battery packs for ease of service NANO NXT CYLINDER PERFORMANCE DATA DELIVERED* PERFORMANCE: 14W Classic White 20W Color Rendering Index: Source Lumens: Pendant Performance Lumens Per Watt: Delivered Lumens: Glow Pendant Performance Lumens Per Watt Delivered Lumens *Performance data based on 3000K, 80+ CRI CORRELATED COLOR TEMPERATURE 2700K Classic White 3000K 3500K 4000K Color Rendering Index: Multiplier for Lumen Page 1 usailighting.com 2017., LLC. Covered by US Patents Patents pending., Nano and Color Harmony are registered trademarks of, LLC. Revised 11/15/2017

2 Nano NXT Cylinder LNRP3 Pendant DIMENSIONS RECESSED J-BOX CANOPY CABLE MOUNT (C1, C2, C3) RIGID STEM MOUNT (P1, P2, P3) 3/8 4-5/8 Ø provided in body finish specified 24, 48 or 96 length. Field cuttable. Matches body finish. 1/4 Ø for D19 7/16 Ø for D2 4-5/8 Ø 3/8 FOR USE WITH RECESSED JUNCTION BOXES 3/8 5 Ø provided in body finish specified Specify stem finish and length in 1 increments (6-95 ) 1/2 Ø Stem 5 Ø 3/8 Body Finish Body Finish 6 6 Front Cap Finish Front Cap Finish /8 Ø 5 Ø 6 length available with remote power supply only 4-5/8 Ø 6 length available with remote power supply only 5 Ø CONDUIT CUTOUT CANOPY FOR SURFACE MOUNTED J-BOX CABLE MOUNT (CJ1, CJ2, CJ3) RIGID STEM MOUNT (PJ1, PJ2, PJ3) 2-3/8 2-3/8 1/2 or 3/4 Conduit (by others) provided in body finish specified , 48 or 96 length. Field cuttable. Matches body finish. 1/4 Ø for D19 7/16 Ø for D2 Body Finish Front Cap Finish FOR USE WITH SURFACE MOUNTED JUNCTION BOXES AND CONDUIT 1/2 or 3/4 Conduit (by others) provided in body finish specified 6 3 Specify stem finish and length in 1 increments (6-95 ) 1/2 Ø Stem Body Finish Front Cap Finish 6-1/8 6-1/ /8 6-1/8 6 length available with remote power supply only 6 length available with remote power supply only Page 2 usailighting.com 2017., LLC. Covered by US Patents Patents pending., Nano and Color Harmony are registered trademarks of, LLC. Revised 11/15/2017

3 Nano NXT Cylinder LNRP3 Pendant with Glow Glass DIMENSIONS RECESSED J-BOX CANOPY CABLE MOUNT (C1, C2, C3) RIGID STEM MOUNT (P1, P2, P3) 3/8 4-5/8 Ø provided in body finish specified 4-5/8 Ø 3/8 5 Ø 5 Ø provided in body finish 3/8 specified 3/8 24, 48 or 96 length. Field cuttable. Matches body finish. 1/4 Ø for D19 7/16 Ø for D2 Body Finish FOR USE WITH RECESSED JUNCTION BOXES Specify stem finish and length in 1 increments (6-95 ) 1/2 Ø Stem Body Finish 2 or Front Cap Finish Front Cap Finish 2-1/4" Ø Glow Glass 2 or 3 2-1/4" Ø Glow Glass 2-1/4" Ø 2 or 3 2-1/4" Ø 4-5/8 Ø 5 Ø 6 length available with remote power supply only 4-5/8 Ø 6 length available with remote power supply only 5 Ø CONDUIT CUTOUT CANOPY FOR SURFACE MOUNTED J-BOX CABLE MOUNT (CJ1, CJ2, CJ3) RIGID STEM MOUNT (PJ1, PJ2, PJ3) 2-3/8 2-3/8 1/2 or 3/4 Conduit (by others) provided in body finish specified 24, 48 or 96 length. Field cuttable. Matches body finish. 1/4 Ø for D19 7/16 Ø for D2 1/2 or 3/4 Conduit (by others) provided in body finish specified Specify stem finish and length in 1 increments (6-95 ) 1/2 Ø Stem 6 2 or 3 Body Finish Front Cap Finish Glow Glass FOR USE WITH SURFACE MOUNTED JUNCTION BOXES AND CONDUIT 6 2 or 3 Body Finish Front Cap Finish Glow Glass 2-1/4" Ø 6-1/8 2 or 3 2-1/4" Ø 6-1/8 2 or 3 2-1/4" Ø 2-1/4" Ø 6-1/8 6-1/8 usailighting.com 6 length available with remote power supply only 6 length available with remote power supply only Page , LLC. Covered by US Patents Patents pending., Nano and Color Harmony are registered trademarks of, LLC. Revised 11/15/2017

4 HOW TO SPECIFY Nano NXT Cylinder LNRP3 Pendant with Integral Driver Specify fixture part number. All boxes must be filled in to correctly order. ORDERING INFORMATION LNRP3 Nano Cylinder Pendant Wattage Front Cap Finish Body Finish GLOW Glass * Body Length Color Temperature Beam Lens Mounting Voltage Dimming Driver LNRP3 Nano 3 Diameter Cylinder Pendant 9014-M2 14W 9020-M2 20W White 13 Statuary Bronze 21 Black 28 Metalized Grey SN Satin Nickel Anodized SC Conduit Silver RAL Custom Color White 13 Statuary Bronze 21 Black 28 Metalized Grey SN Satin Nickel Anodized SC Conduit Silver RAL Custom Color G2 2 Opal Glass G3 3 Opal Glass *Note: If no glass is desired, leave blank length Classic White 27KS 2700K, 80+ CRI 27KH 2700K, 90+ CRI 30KS 3000K, 80+ CRI 30KH 3000K, 90+ CRI 35KS 3500K, 80+ CRI 40KS 4000K, 80+ CRI beam (1) beam beam beam (1) SOC Solite Clear (provided standard) SOF Solite Frosted BOC Borosilicate Clear BOF Borosilicate Frosted AS61 Linear Spread (1) 1 Not available with G2 or G3 glass option Rigid Stem Mount + Conduit Cutout Style PJ length* PJ length* PJ length* Rigid Stem Mount + Recessed JBox Style P length* P length* P length* Cable Mount + Conduit Cutout Style (field cuttable) 120V 277V DIML2 0-V dim, % (provided standard) DIM19 Phase Dimming 1%, 120V only DIML2 0-V dim, % CJ1 24 length CJ2 48 length CJ3 96 length Cable Mount + Recessed JBox Style (field cuttable) C1 24 length C2 48 length C3 96 length *Specify exact stem length in accessory table below PENDANT MOUNT ACCESSORY (order seperately) PMA Pendant Stem Stem Type Stem Length Stem Color PMA Pendant Mount 1/2 Diameter P Stem Lengths P Stem Lengths P Stem Lengths XX Specify stem length from 6-24 in 1 increments XX Specify stem length from in 1 increments XX Specify stem length from in 1 increments White 13 Statuary Bronze 21 Black 28 Metalized Grey SN Satin Nickel Anodized SC Conduit Silver RAL Custom Color NOTE: Specify Pendant Stem for P Rigid Stem Mounting. Accessory does not need to be ordered for C Cable Mount usailighting.com 2017., LLC. Covered by US Patents Patents pending., Nano and Color Harmony are registered trademarks of, LLC. Revised 11/15/2017

5 HOW TO SPECIFY Nano NXT Cylinder LNRP3 Pendant with Remote Driver 1. Specify fixture part number. All boxes must be filled in to correctly ORDERING INFORMATION LNRP3 RM Nano Cylinder Pendant LNRP3 Nano 3 Diameter Cylinder Pendant RPB-01 Remote Power Supply RPB-01 Nano Cylinder Remote Power Supply Wattage 9014-M2 14W 9020-M2 20W Fixture Wattage 14M2 14W 20M2 20W Front Cap Finish White 13 Statuary Bronze 21 Black 28 Metalized Grey SN Satin Nickel Anodized SC Conduit Silver RAL Custom Color Voltage Body Finish White 13 Statuary Bronze 21 Black 28 Metalized Grey SN Satin Nickel Anodized SC Conduit Silver RAL Custom Color 2. Specify Remote Power Supply UNV 120V - 277V 120V 120V Only GLOW Glass * G2 2 Opal Glass G3 3 Opal Glass *Note: If no glass is desired, leave blank Body Length 06 6 length length Remote Dimming Type and Level D2 TR 0-V, % D4 Lutron 3-wire/ECO, 1% D4E Lutron 5 ECO, 5% D4H Lutron H ECO, 1% Fade D6A Eldo 0-V, 0.1% D6B Eldo 0-V, 0.1% D6E Eldo 0-V, 1% D6F Eldo 0-V, 1% D7 Eldo DALI, 0% D8 Eldo DMX, 0% D3 Lutron 2-wire, 1% D19 Hatch Phase 2-wire, 1% Color Temperature Classic White 27KS 2700K, 80+ CRI 27KH 2700K, 90+ CRI 30KS 3000K, 80+ CRI 30KH 3000K, 90+ CRI 35KS 3500K, 80+ CRI 40KS 4000K, 80+ CRI Beam beam (1) beam beam beam (1) Remote Emergency Option EM7 EM battery requires remote enclosure by others, minimum size 14.5 L x 6.5 W x 3 H NOTE: Remote Power Supplies Require Enclosures by Others. See Page 6 for Details. 3. Specify Pendant Stem Accessory (required for rigid stem only) Lens SOC Solite Clear (provided standard) SOF Solite Frosted BOC Borosilicate Clear BOF Borosilicate Frosted AS61 Linear Spread (1) 1 Not available with G2 or G3 glass option Mounting Rigid Stem Mount + Conduit Cutout Style PJ length* PJ length* PJ length* Rigid Stem Mount + Recessed JBox Style P length* P length* P length* Cable Mount + Conduit Cutout Style (field cuttable) CJ1 24 length CJ2 48 length CJ3 96 length Cable Mount + Recessed JBox Style (field cuttable) C1 24 length C2 48 length C3 96 length *Specify exact stem length in accessory table below Remote Power Supply RM Remote Power Supply (Specify in table below) Power Supply Must Be Specified PMA Pendant Stem Stem Type Stem Length Stem Color PMA Pendant Mount 1/2 Diameter P Stem Lengths P Stem Lengths P Stem Lengths XX Specify stem length from 6-24 in 1 increments XX Specify stem length from in 1 increments XX Specify stem length from in 1 increments White 13 Statuary Bronze 21 Black 28 Metalized Grey SN Satin Nickel Anodized SC Conduit Silver RAL Custom Color NOTE: Specify Pendant Stem for P Rigid Stem Mounting. Stem Accessory does not need to be ordered for C Cable Mount Page 5 usailighting.com 2017., LLC. Covered by US Patents Patents pending., Nano and Color Harmony are registered trademarks of, LLC. Revised 11/15/2017

6 Nano NXT Cylinder LNRP3 Pendant NANO NXT CYLINDER PENDANT SPECIFICATIONS FIELD REPLACEABLE LIGHT ENGINE Light engine is serviceable without tools. All light engines feature industry-leading color consistency. FIELD REPLACEABLE Solid state electronic, 0-V, % dimming driver with a high power factor provided standard. Specify 120V or 277V. Driver complies with IEEE C62.41 surge protection. Some on-time delay may be experienced depending on control system used. REMOTE LOCATION 6 long cylinder requires remote power supply. If a remote dimming driver is required, specify RM in the fixture part number and proceed to the RP table to complete the dimming driver specification. All remote power supplies must be clearly specified in the RP table, with one remote power supply required per fixture. Remote power supplies require enclosures by others that meet local codes and must be located in an accessible service panel within 0ft of the light fixture; see table below for coordination of enclosure sizes. All dimming drivers comply with IEEE C62.41 surge protection. REMOTE LOCATION EMERGENCY Remote emergency battery IOTA ILB-CP07 provides 200mA to one fixture for 90 minutes. Remote power supplies with EM option require an enclosure with minimum size of 14.5 L x 6.5 W x 3 H by others that meets local codes. NANO CYLINDER REMOTE POWER SUPPLY REQUIREMENTS AND WIRING DIAGRAM Minimum Enclosure Size Required (by others) Remote Power Supply Dimming Option Wire Gauge Required* RP Only RP with EM Option** UNV-D2 TR 0-V dim, % 14/12 7 W x L x 2 H UNV-D4 Lutron 3-wire/ECO, 1% RPB-01-14M2 UNV-D4E Lutron 5 ECO, 5% RPB-01-20M2 UNV-D4H Lutron H ECO, 1% fade 14/12 UNV-D6A Eldo 0-V, 0.1% UNV-D6B Eldo 0-V, 0.1% UNV-D6E Eldo 0-V, 1% 18/ W x 4 L x 2 H 14.5 W x 6.5 L x 3 H UNV-D6F Eldo 0-V, 1% UNV-D7 Eldo DALI, 0% UNV-D8 Eldo DMX, 0% 120V-D3 Lutron 2-wire phase, 1% 14/12 120V-D19 Hatch 2-wire phase, 1% 14/ W X L X 2 H * Wire gauge 14/12 = Maximum distance from light fixture to remote power supply is 0 using 12 gauge wire, 50 using 14 gauge wire. * Wire gauge 18/16 = Maximum distance from light fixture to remote power supply is 0 using 16 gauge wire, 50 using 18 gauge wire. ** Emergency battery remote power supplies cannot be located any more than 50 feet from light fixture. HOMERUN USE FOR WIRING WIRING S REQUIRED MDF02M DP02 MDF04M DP04 MDF06M MDF08M DP06 DP08 INPUT WIRES RP2 RPB REMOTE POWER SUPPLY + - A DIMMING COMPATIBILIT ATIBILITY SEE SHEET DIMMING FOR DETAILS COMPATIBILTY SHEETS FOR DETAILS + - BODY 3 Ø extruded aluminum body available in 6 or length. Nano Cylinder body and cap are available in a variety of powder coated paint finishes or an anodized satin nickel finish. Custom colors also available (provide RAL #). Cylinder body finish and cap finish may be separately specified. FRONT CAP Standard cylinder is provided with threaded extruded aluminum assembly retaining 1 regress solite lens in front cap finish specified. If decorative opal Glow glass option is specified, the assembly is fitted with a decorative opal glass cylinder available in 2 or 3 length. Page 6 usailighting.com 2017., LLC. Covered by US Patents Patents pending., Nano and Color Harmony are registered trademarks of, LLC. Revised 11/15/2017

7 Nano NXT Cylinder LNRP3 Pendant NANO NXT CYLINDER PENDANT SPECIFICATIONS MOUNTING Hardware included for mounting to 4 octagonal junction box. PENDANT STEM MOUNT 1/2 Ø (1/4 IPS) steel stem is provided cut to length specified with 30 hang straight. Specify stem finish and length (in 1 increment) in accessories table when ordering; stem is not field cuttable. 5 Ø round x 3/8 deep canopy is provided in finish matching body finish specified for mounting to recessed mounted junction box. Please contact factory if a different canopy color is desired. CABLE MOUNT 1/4 Ø or 7/16 Ø braided cable, field cuttable, and 4-5/8 Ø x 3/8 deep round canopy are provided in finish to match cylinder body finish specified. Select from three field cuttable cable lengths in ordering table. Please contact factory if a different power cable and canopy finish is desired. RECESSED JBOX CANOPY: If recessed J-box canopy style is specified (P1, P2, P3 or C1, C2, C3 options) 5 Ø or 4-5/8 Ø round x 3/8 deep canopy is provided for mounting to recessed mounted junction box. Recessed jbox canopy is provided in matching finish per fixture body finish specification. CONDUIT CUTOUT CANOPY: If J canopy is specified, round x 2-3/8 deep canopy is provided for mounting to standard 4 octagonal surface mounted junction box. Conduit cutout canopy has 4 keyslots, one in each side, and ships with three conduit cutout keys and three solid cover keys which are field interchangeable and can be configured to accommodate any ceiling layout using ½ or ¾ conduit. Conduit cutout canopy is provided in matching finish per fixture body finish specification. CONDUIT CUTOUT MOUNTING EXAMPLE Conduit End Straight Conduit L Conduit T Conduit 4 OCTAGONAL JUNCTION BOX DETAIL KEY COVER DETAIL 3-1/2 1-1/2 SOLID COVER KEY CONDUIT CUTOUT KEY 3-1/2 4 4"Ø X 1-1/2" Deep Octagon J-Box (by others) 3 provided with each Conduit Cutout 3 provided with each Conduit Cutout WEIGHT Cylinder weighs 3 lbs (not including rigid pendant stem accessory). WARRANTY Based on IESNA LM , Nano Cylinder has a 50,000 hour rated life at 70% lumen maintenance (L70). Warranty covers replacement parts for 5 years from date of shipment. Warranty is void if Cylinder is used with any power supply other than that which is provided by. LISTINGS Dry/Damp. NRTL/CSA-US tested to UL standards. IBEW union made. NOTES Ambient temperatures at fixture location should not exceed 40 C during normal operation. For interior use only PHOTOMETRICS Consult factory or website for IES files. Tested in accordance with IESNA LM Page 7 usailighting.com 2017., LLC. Covered by US Patents Patents pending., Nano and Color Harmony are registered trademarks of, LLC. Revised 11/15/2017

8 DIMMING WIRING SCHEMES: DIMMING COMPATIBILITY D2 / DIML2 NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details. D2 / DIML2 : 0-V Dimming Driver Wiring (Dims down to %) D2 / DIML2 Dimmer Compatibility Chart Dimmed Light Qty Fixtures Manufacturer Product Part Number Output Range Per Dimmer* 120V / 277V Use source current per Crestron ilux dimmer expansion module CLS-EXP-DIMFLV 0% - % fixture specification Crestron DIN Rail dimmer DIN-4DIMFLV4 0% - % sheet to determine Crestron DIN Rail analog output module DIN-A08 0% - % number of fixtures per Crestron 8 Channel dimmer module GLX-DIMFLV8 0% - % dimmer. Max number Crestron 8 Channel dimmer module GLXP-DIMFLV8 0% - % of fixtures is limited by Leviton IllumaTech dimmer IP7-DLX 0% - % dimmer load rating. Lightolier (Philips) Vega V2000FAMU 0% - % Lutron Diva DVTV-XX 0% - % * NOTE: Refer to dimmer manufacturer's documentation for installation instructions and circuit details. DIMMER: 0-V D2 / DIML2 0-V DIMMING W/RELAY TO SWITCH POWER 0-V (-) 0-V (+) SWITCHED HOT GRAY PURPLE V- NOTE: If switched, non-dimming operation is desired, cap off purple and gray wires individually at installation. Do NOT cap purple and gray wires together. CLASS 2 CONTROL WIRES RELAY DIMMER: 0-V w/ POWER SWITCHING D2 / DIML2 0-V DIMMING (NO RELAY) 0-V (-) 0-V (+) SWITCHED HOT GRAY PURPLE V- NOTE: If switched, non-dimming operation is desired, cap off purple and gray wires individually at installation. Do NOT cap purple and gray wires together. GROUND 2016., LLC. I Revised 03/22/2017

9 DIMMING WIRING SCHEMES: DIMMING COMPATIBILITY D3 / DIML3 NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details. D3 / DIML3 : Lutron Hi-Lume A-Series 2 Wire Fwd Phase (with neutral) / Dimming Driver Wiring (Dims down to 1%) 120V D3 / DIML3 Dimmer Compatibility Chart Dimmed Light Qty Fixtures Per Dimmer* Manufacturer Product Part Number Output Range Fixture Wattage 120V Only 39W and Less 40W - 80W ETC Sensor+ Cabinet ELV 0% - 1% ETC Unison DRd Cabinet ELV 0% - 1% Lutron Maestro Wireless 600W dimmer MRF2-6ND-120-0% - 1% Lutron Maestro Wireless 00W dimmer MRF2-ND-120-0% - 1% Lutron HomeWorks QS adaptive dimmer HQRD-6NA- 0% - 1% Lutron HomeWorks QS 600W dimmer HQRD-6ND- 0% - 1% Lutron HomeWorks QS 00 W dimmer HQRD-ND- 0% - 1% Lutron Caseta Wireless Pro 00W dimmer PD-NXD- 0% - 1% Lutron Stanza dimmer SZ-6ND- 0% - 1% Lutron RadioRA 2 adaptive dimmer RRD-6NA- 0% - 1% Lutron RadioRA 2 00 W dimmer RRD-ND- 0% - 1% Lutron myroom DIN power module MQSE-4A1-D 0% - 1% Lutron HomeWorks QS wallbox power module HQRJ-WPM-6D-120-0% - 1% Lutron Homeworks DIN power module LQSE-4A1-D 0% - 1% Lutron HomeWorks wallbox power module HWI-WPM-6D-120 0% - 1% Lutron GRAFIK Eye QS control unit QSGR-, QSGRJ- 0% - 1% Lutron GRAFIK Eye 3000 control unit GRX-30-, GRX % - 1% Lutron RPM-4U module HW-RPM-4U-120, LP-RPM-4U-120 0% - 1% Lutron RPM-4A module HW-RPM-4A-120, LP-RPM-4A-120 0% - 1% Lutron GP dimming panels Various 0% - 1% Lutron Ariadni CL 250W dimmer AYCL-253P- 0%-1% Lutron Diva CL 250W dimmer DVCL-253P-, DVSCCL-253P- 0%-1% Lutron Grafik T CL or RF CL dimmer GT-250M-, GTJ-250M- 0%-1% Lutron Nova T CL 250W dimmer NTCL-250-0%-1% * NOTE: Refer to dimmer manufacturer's documentation for installation instructions and circuit details. D3 / DIML3 2 WIRE PHASE DIMMING DIMMER: 2 WIRE PHASE SWITCHED HOT V- GROUND ONLY FOR SWITCHES WITH 2016., LLC. I Revised 03/22/2017

10 DIMMING WIRING SCHEMES: DIMMING COMPATIBILITY D4 / DIML4 NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details. D4 / DIML4 : Lutron Hi-Lume A-Series Driver with 3-Wire FL Control / Dimming Driver Wiring (Dims down to 1%) D4 / DIML4 3-Wire Dimmer Compatibility Chart Dimmed Light Qty Fixtures Per Control* Manufacturer Product Part Number Output Range Fixture Wattage 120V Only 39W and Less 40W - 80W ETC Sensor+ Cabinet D20 Dimming module 0% - 1% ETC Unison DRd Cabinet D20F Dimming module 0% - 1% Lutron Nova T NTF-- 0% 1% Lutron Nova T NTF-3P- 0% 1% Lutron Nova NF-- 0% 1% Lutron Nova NF-3P- 0% 1% Lutron Vareo VF-- 0% 1% Lutron Skylark SF-P-, SF-3P- 0% 1% Lutron Diva DVF-3P-, DVSCF-3P- 0% 1% Lutron Ariadni AYF-3P- 0% 1% Lutron Vierti VTF-6A- 0% 1% Lutron Maestro MAF-6AM-, MSCF-6AM- 0% 1% Lutron Maestro Wireless MRF2-F6AN-DV- 0% 1% Lutron RadioRA 2 RRD-F6AN-DV- 0% 1% Lutron HomeWorks QS HQRD-F6AN-DV 0% 1% Lutron Interfaces PHPM-3F-120, PHPM-3F-DV 0% 1% Lutron GP Dimming Panels Various 0% 1% V Only 40W and Less 41W - 80W ETC Sensor+ Cabinet D20 Dimming module 0% - 1% ETC Unison DRd Cabinet D20F Dimming module 0% - 1% Lutron Nova T NTF % 1% Lutron Nova T NTF-3P-277-0% 1% Lutron Nova NF % 1% Lutron Nova NF-3P-277-0% 1% Lutron Skylark SF-12P-277-, SF-12P % 1% Lutron Diva DVF-3P-277-, DVSCF-3P-277-0% 1% Lutron Ariadni AYF-3P-277-0% 1% Lutron Vierti VTF-6A- 0% 1% Lutron Maestro MAF-6AM-277-, MSCF-6AM-277-0% 1% Lutron Maestro Wireless MRF2-F6AN-DV- 0% 1% Lutron RadioRA 2 RRD-F6AN-DV- 0% 1% Lutron HomeWorks QS HQRD-F6AN-DV 0% 1% Lutron Interfaces PHPM-3F-DV 0% 1% Lutron GP Dimming Panels Various 0% 1% * NOTE: Number of fixtures may be higher if wattage is less than maximum values shown. Refer to dimmer manufacturer's documentation for installation instructions and circuit details. DIML4 wiring diagrams continued on next page 2016., LLC. I Revised 03/22/2017

11 DIMMING WIRING SCHEMES: DIMMING COMPATIBILITY D4 / DIML4 Continued NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details. D4 / DIML4 : Lutron Hi-Lume A-Series Driver with 3-Wire FL Control / Dimming Driver Wiring (Dims down to 1%) GROUND DIMMER: 3 WIRE PHASE DIMMED HOT SWITCHED HOT D4 / DIML4 3 WIRE PHASE DIMMING CAP UNUSED ECOSYS WIRES PURPLE GRAY PURPLE ORANGE V- D4 / DIML4 : Lutron Hi-Lume A-Series Driver with EcoSystem Control / Dimming Driver Wiring (Dims down to D4 / DIML4 EcoSystem Dimmer Compatibility Chart Dimmed Light Qty Fixtures Per Control* Manufacturer Product Part Number Output Range Fixture Wattage 120V / 277V 39W and Less 40W - 80W Lutron PowPak dimming module RMJ-ECO32-DV-B 0% 1% Lutron Energi Savr Node QSN-1ECO-S, QSN-2ECO-S 0% 1% Lutron GRAFIK Eye QS (120V ONLY) QSGRJ-_E, QSGR-_E 0% 1% Lutron Quantum Various 0% 1% * NOTE: Number of fixtures may be higher if wattage is less than maximum values shown. Refer to dimmer manufacturer's documentation for installation instructions and circuit details. E2 E1 D4 / DIML4 EcoSystem CONTROLS ECOSYS BUS E2 E1 WALL CONTROL CAP UN-USED ORANGE WIRE PURPLE GRAY PURPLE ORANGE V , LLC. I Revised 03/22/2017

12 DIMMING WIRING SCHEMES: D4E / DIML4E EcoSystem Dimmer Compatibility Chart Dimmed Light Qty Fixtures Per Control* Manufacturer Product Part Number Output Range Fixture Wattage 120V / 277V 39W and Less 40W - 80W Lutron PowPak dimming module RMJ-ECO32-DV-B 0% 5% Lutron Energi Savr Node QSN-1ECO-S, QSN-2ECO-S 0% 5% Lutron GRAFIK Eye QS (120V ONLY) QSGRJ-_E, QSGR-_E 0% 5% Lutron Quantum Various 0% 5% DIMMING COMPATIBILITY D4E / DIML4E and D4H /DIML4H NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details. D4E / DIML4E : Lutron 5 Series EcoSystem Driver / Dimming Driver Wiring (Dims down to 5%) * NOTE: Number of fixtures may be higher if wattage is less than maximum values shown. Refer to dimmer manufacturer's documentation for installation instructions and circuit details. D4H / DIML4H : Lutron H Series EcoSystem Driver with Fade to Black (dims down to 1%) D4H / DIML4H EcoSystem Dimmer Compatibility Chart Dimmed Light Qty Fixtures Per Control* Manufacturer Product Part Number Output Range Fixture Wattage 120V / 277V 39W and Less 40W - 80W Lutron PowPak dimming module RMJ-ECO32-DV-B 0% 1% Lutron Energi Savr Node QSN-1ECO-S, QSN-2ECO-S 0% 1% Lutron GRAFIK Eye QS (120V ONLY) QSGRJ-_E, QSGR-_E 0% 1% Lutron Quantum Various 0% 1% * NOTE: Number of fixtures may be higher if wattage is less than maximum values shown. Refer to dimmer manufacturer's documentation for installation instructions and circuit details. D4E / DIML4E and D4H / DIML 4H EcoSystem CONTROLS E2 E1 ECOSYS BUS E2 E1 WALL CONTROL PURPLE GRAY PURPLE V , LLC. I EH Revised 03/22/2017

13 DIMMING COMPATIBILITY D6A / DIML6A and D6E / DIML6E D6B / DIML6B and D6F / DIML6F D6A / DIML6A and D6E / DIML6E Dimming Compatibility Table D6A / DIML6A and D6E / DIML6E are linearly programmed dimming drivers for use with logarithmic-style dimming controls (e.g., Lutron and others listed in the table below) D6A / DIML6A = Eldo SOLOdrive 0-V control dims from 0% to 0.1% D6E / DIML6E = Eldo ECOdrive 0-V control dims from 0% to 1% D6A / DIML6A and D6E / DIML6E Dimmer Compatibility Chart Dimmed Light Qty Fixtures Manufacturer Product Part Number Output Range Per Dimmer* 120V & 277V DIML6A 6E Refer to manufacturer's Lutron Diva DVTV/NFTV with PP-20 99% - 0.1% 1% dimmer load rating for Lutron Nova T NTFTV with PP-20 99% - 0.1% 1% maximum and minimum Lutron Energi Savr Node QSN-4T16-S 0% - 0.1% 1% fixture quantities per Lutron GP Dimming Panels TVM2 Module 99% - 0.1% 1% dimmer. Lutron Interfaces GRX-TVI w/ GRX3503 0% - 0.1% 1% Enlighted compatible. Sensor Switch nio nio EZ 0% - 0.1% 1% enlighted Control Unit CU-3E-1R 0% - 0.1% 1% D6B / DIML6B and D6F / DIML6F Dimming Compatibility Table D6B / DIML6B and D6F / DIML6F are logarithmic-programmed dimming drivers for use with linear-style dimming controls (e.g., Crestron, non-lutron and others listed below) D6B / DIML6B = Eldo SOLOdrive 0-V control dims from 0% to 0.1% D6F / DIML6F = Eldo ECOdrive 0-V control dims from 0% to 1% D6B / DIML6B and D6F / DIML6F Dimmer Compatibility Chart Dimmed Light Qty Fixtures Manufacturer Product Part Number Output Range Per Dimmer* 120V & 277V DIML6B 6F Bush-Jaeger Electronic potentiometer 2112U-1 0% - 0.1% 1% Jung Electronic potentiometer 240-0% - 0.1% 1% Leviton Iluma Tech dimmer IP7-DLX 0% - 0.1% 1% Lightolier (Philips) Momentum (120V ONLY) ZP600FAM120 0% - 0.1% 1% Merten Electronic potentiometer % - 0.1% 1% Pass & Seymour Titan CD4FB-W 0% - 0.1% 1% Watt Stopper Miro DCLV1 0% - 0.1% 1% Synergy Wallbox Dimmers ISD BC 0% - 0.1% 1% ABB i-bus SD/S % - 0.1% 1% Crestron Modules GLX-DIMFLV8, GLXP-DIMFLV8 0% - 0.1% 1% Crestron Green Light GLPAC-DIMFLV4-, GLPAC-DIMFLV8-0% - 0.1% 1% Crestron Green Light Power Pack GLPP-DIMFLVEX-PM, GLPP-1DIMFLV2EX-PM, GLPP-1DIMFLV3EX-PM 0% - 0.1% 1% Crestron DIN Rail Analog Output Module DIN-A08 0% - 0.1% 1% Crestron DIN Rail 0-V Fluorescent Dimmer DIN-4DIMFLV4 0% - 0.1% 1% Crestron ilux 0-V Dimmer Expansion Module CLS-EXP-DIMFLV 0% - 0.1% 1% enlighted Control Unit CU-3E-1R 0% - 0.1% 1% Refer to manufacturer's dimmer load rating for maximum and minimum fixture quantities per dimmer. Enlighted compatible. DIMMING WIRING SCHEMES: NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details. D6 / DIML6 D6 / DIML6 0-V DIMMING W/RELAY TO SWITCH POWER 0-V DIMMING (NO RELAY) CLASS 2 CONTROL WIRES DIMMER: 0-V RELAY 0-V (-) 0-V (+) SWITCHED HOT GRAY PURPLE V- GROUND DIMMER: 0-V w/ POWER SWITCHING 0-V (-) 0-V (+) SWITCHED HOT GRAY PURPLE V- DIMMER: 0-V w/ POWER SWITCHING DIML6A, 6B 0-V DIMMING (NO RELAY) 2016., LLC. I Revised 08/14/2017

14 DIMMING WIRING SCHEMES: DIMMING COMPATIBILITY D7 / DIML7 and D7E NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details. D7 / DIML7 and D7E Dimming Driver Wiring D7 / DIML7 and D7E are linearly programmed dimming drivers. D7 / DIML7 = Eldo SOLOdrive DALI control dims from 0% to 0.1% D7E = Eldo ECOdrive DALI control dims from 0% to 1% D7 / DIML7 / D7E DALI CONTROLS DALI BUS DA DA WALL CONTROL ORANGE (-) ORANGE/ (+) V , LLC. I Revised 08/14/2017

15 DIMMING WIRING SCHEMES: DIMMING COMPATIBILITY D8 / DIML8 and D8E NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details. D8 / DIML8 and D8E Dimming Driver Wiring D8 / DIML8 and D8E are linearly programmed dimming drivers. D8 / DIML8 = Eldo POWERdrive DMX control dims from 0% to 0.1% D8E = Eldo POWERdrive DMX control dims from 0% to 1% DMX BUS - XLR CABLE OR SHIELDED DATA CABLE The data cable used must meet the following requirements: type: shielded, 2-conductor twisted pair maximum capacitance between conductors: 30 pf/ft maximum capacitance between conductor and shield: 55 pf/ft maximum resistance: 0.02 ohms/ft normal impedance: ohms conductive core: 24 AWG is recommended If 3-wire data cables are preferred, we suggest a Belden 9841 or equivalent cable which meets the specifications for EIA RS-485 applications. Do not use standard microphone cables: they cannot transmit DMX512 data reliably over long distances. NOTE: DMX link termination device (by others) should be used on last fixture in line on a circuit to avoid signal loss. D8 / DIML8 / D8E DMX CONTROLS DMX BUS - XLR CABLE OR SHIELDED DATA CABLE SHIELD DMX (-) DMX (+) 5 PIN XLR JACKS STANDARD 8 BIT DMX 512 CONTROLLER RED BARE V , LLC. I Revised 08/14/2017

16 DIMMING WIRING SCHEMES: DIMMING COMPATIBILITY D19 / DIML19 NOTES: Wiring diagrams are examples of typical installations intended to illustrate the number of wires that must be run to fixture. These diagrams are not intended to specify all equipment necessary for a given dimming circuit. Refer to specific dimmer manufacturer's documentation for details. D19 / DIML19 : Hatch XTC series or equivalent - Forward and Reverse Phase Dimming Driver. Dims down to 1% contingent upon dimmer specification and load. 120V only. D19 / DIML19 2 WIRE PHASE DIMMING DIMMER: 2 WIRE PHASE SWITCHED HOT V- GROUND ONLY FOR SWITCHES WITH D19 / DIML19 Dimmer Compatibility Chart 120V ONLY Forward Phase / TRIAC Dimming Manufacturer Product Qty Fixtures Per Dimmer Leviton IPL06-Z Use fixture wattage per 6613-xxx fixture specification Lutron S-600P sheet to determine S-603P number of fixtures DV-600P per dimmer. Max number DV-603P of fixtures is limited by DVSC-603P dimmer load rating. CT-600P CT-603P 120V ONLY Reverse Phase / ELV Dimming Manufacturer Product Qty Fixtures Per Dimmer Leviton 6615 Use fixture wattage per IPE04-xxx fixture specification Lutron NTELV-300 sheet to determine NTELV-600 number of fixtures SELV-300P per dimmer. Max number SELV-303P of fixtures is limited by DVELV-300P dimmer load rating. DVELV-303P 2016., LLC. I Revised 03/22/2017