Essenza. Dim-To-Warm Round Downlights

Transcription

1 Dim-To-arm Round Downlights Downlight Adjustable Product Overview Features Add ambiance to any hospitality, residential, retail or commercial space. Amerlux Essenza Downlight Dim-To-arm option offers a lower kelvin temperature as you dim the lights. An adaptable light source in a cost- effective, solid state lighting package. The Dim-To-arm option can tap into the powerful mediums of light and color to enhance the experience, well-being, and human emotion. Amerlux Dim-To-arm allows designers to simulate the familiar glow and dimming of incandescent lamps. Type: Recessed Round Downlight, Accent, all ash attage: 12 (IC/AT), 15 umen Output: 866 lm max (EZRD trim, 15, Spot optic) Color Temp: 000K to 1800K CRI: 95+ Dimming: TRIAC & EV (120V/277V) - 5% Dim utron A Series (120V/277V), -wire/ecosystem Hi-lume - 1% dim utron H Series (120V/277V), EcoSystem, Hi-lume - 1% dim with soft on, fade to black 0-10V (120V/277V) - 1% Dim DAI dimming - 1% Dim ens all ash Shower Fixture Type New Construction Remodeler Trim Trimless Yes Yes Yes Yes Electrical Data 12 (IC/AT) 15* Dim-To-arm CCT Curve System atts Amps System atts Amps 120V V Electronic constant current ED driver *Includes 2 thermal protector 2800 Pinhole Downlight CCT (K) Dimming (% of ight Output) IT /15/18 Page 1 of 1

2 Housing/Frame Ordering Information Model For New Construction EZ-NC-DT-A17 (New Construction) EZ-CP-DT-A17 (Chicago Plenum (CCEA) housing) EZ-IC-DT-A17 (Insulated Ceiling/air tight housing, 12 only) For Existing Ceilings EZ-REM-DT-A17 Style T - trimmed RT - round trimless 4 5 Voltage /277 (for use with IC housing only) Driver (for non-dimming, select E/TE option) E/TE - TRIAC/EV dimming HIUME-A - utron Hi-lume A Series, -wire/ecosystem, Hi-lume, 1% dim HIUME-H - utron Hi-lume H Series, EcoSystem Hi-lume, 1% dim with soft on, fade to black 0-10V V dimming; 1% dim DAI - DAI dimming, 1% dim attage 12 (IC/AT) 15 (not available for use with IC housing) 6 Options/Accessories EM - integral emergency battery pack with remote test switch, requires 7" ceiling clearance (not available for use with REM, CP or IC option) Trim Ordering Information Model EZRD-DT-A17 (downlight) EZRA-DT-A17 (adjustable) EZR-DT-A17 (wall wash) EZRSH-DT-A17 (shower, not available for use in trimless) EZRPD-DT-A17 (pinhole downlight) Style T - trimmed T - trimless (not available for Shower (EZRSH) trim) 4 5 Beam Spreads (not for use with EZR trim) VNF - very narrow flood, 18 F - flood, 5 F* - wide flood, VF*- very wide flood, 50 * Not available for use with EZRPD trim Color Temp 95+ CRI K-95+ Finish RD/RA/R/RSH Trims: Trimmed M - matte white, white flange RPD Trim (Trimmed & Trimless): M - matte white Trimless M - matte white The "A" refers to the sequential revision in a year and "XX" refers to the year of update. Updates coincide with improved performance while not changing the overall fixture aesthetic and are reflected in the published performance data. Please contact your Amerlux representative for explanations of changes. IT /15/18 Page 2 of 1

3 Specifications Application Hospitality, retail and commercial ambient, accent and wall wash lighting Construction 20 ga. galvanized steel frame 18 ga. galvanized steel splice housing and hanger brackets (not for use with Remodeler version) Cast aluminum plaster frame with perforated face (for trimless version only) Die-cast optical housing, trim and heatsink Optical Beam spreads (for RD, RA, RSH & RPD fixtures): Very Narrow Flood, 18º; Flood, 5º; ide Flood, º; Very ide Flood, 50º Tilt (for RA fixture): 0-0 tilt lock, 55 rotation ens: R fixture: Engineered nano technology lens provides high transmission while concealing ED image Shower fixture: Siliconed solite lens ED Color Temp Options: 000K dims to 1800K (12 fixtures start at 20K) CRI: 95+ R9 Values: 85 (95 CRI) Binning: MacAdam (SDCM) ife: 50,000+ hrs, > 70% of initial lumens at 50,000 hrs Electrical attage: 12 (IC/AT),15 Electronic constant current ED driver, 120V/277V input This product complies with IEEE C62.41 for surge endurance up to 2.5KV. Amerlux recommends using additional surge protection with this unit (supplied by others), surge and over voltage damage is not covered under warranty. Note: Drivers are universal input voltage but thermal protector is voltage specific Drivers E/TE - eading Edge, TRIAC, forward phase/trailing Edge, EV, reverse phase 0-10V and utron systems also available See pages 6-9 for more dimming information Finish Powder coat paint Consult factory for custom finishes Mounting Trimmed For use in T-grid or sheetrock ceilings, max thickness 1" Trimless For use in sheetrock ceilings, max thickness 5/8" Certifications CSA listed to U standards Damp location IC/AT (insulated ceiling/air tight) rated, 12 only, optional Chicago Plenum (CCEA) optional arranty year limited warranty IT /15/18 Page of 1

4 Essenza Round Downlight: 14 1 /2 min - 26 max 11 1 /2 8 1 / /4 Optional IC/AT housing (12w only) 7 /4 6 1 / / /16 Ceiling cut out: 4 dia. Downlight 2 15 /16 Adjustable 2 15 /16 0 up to 1 Tilt locking screw ens all ash Shower /8 up to 1 / / /16 up to 1 /8 up to 1 /8 Pinhole Downlight Frame with Emergency Battery Pack 2 15 /16 Emergency Battery Pack up to 1 Ø1 1 /16 7 / /8 5 1 /2 7 1 /2 Ceiling 11 1 /2 1 9 / /2 min - 26 max IT /15/18 Page 4 of 1

5 Essenza Round Downlight Trimless: 14 1 /2 min - 26 max Optional IC/AT housing (12w only) 7 /8 7 /4 12 / /2 Trimless Ceiling cut out: 4 1 /2 dia. Downlight Adjustable 0 Tilt locking screw ens all ash Pinhole Downlight Ø1 1 /16 Plaster Frame Installation Detail (for trimless fixture only) Frame with Emergency Battery Pack 6 Emergency Battery Pack / /8 5 1 /2 1. Reflector Trim 2. Aperture plate. Ceiling ⅝ 4. Cast Aluminum Plaster Frame 5. Plaster Skim Coat (by others) Type F Thread Cutting Screw 7 1 /2 Ceiling 11 1 /2 1 9 / /2 min - 26 max IT /15/18 Page 5 of 1

6 Essenza Round Remodeler: 5 / / /4 Ø6 1 /4 1 /16 A STRUCTURE 5 / /4 (1" max) 5 1 /2 min Clearance Product A EZ-RD-REM 2 /8 EZ-RA-REM /16 EZ-R-REM 5 /16 EZ-RSH-REM 2 /8 EZ-RPD-REM 2 1 /2 To allow driver removal through cut out. 7 9 /16 Ceiling cut out: 4 dia. Downlight Adjustable 1 /16 1 /2 2 9 / /16 0 Tilt locking screw ens all ash Shower 5 /16 1 / / /16 Pinhole Downlight 1 / /16 Ø1 1 /16 IT /15/18 Page 6 of 1

7 Essenza Round Remodeler Trimless: 4 STRUCTURE Product A 5 / / /4 Ø6 1 /4 1 /16 5 / /4 5 1 /2 min Clearance EZ-RD-REM-T 2 5 /16 EZ-RA-REM-T EZ-R-REM-T 1 /4 EZ-RPD-REM-T 2 7 /16 A To allow driver removal through cut out. 7 9 /16 Trimless Ceiling cut out: 4 1 /2 dia. Downlight Adjustable 1 /16 7 / / /16 0 Tilt locking screw ens all ash Pinhole Downlight 1 /4 1 / / /16 Ø1 1 /16 Plaster Frame Installation Detail (for trimless fixture only) 1. Reflector Trim 2. Aperture plate 6. Ceiling ⅝ 4. Cast Aluminum Plaster Frame 2 5. Plaster Skim Coat (by others) Type F Thread Cutting Screw IT /15/18 Page 7 of 1

8 Essenza Round Downlight: FIXTURE DATA: (Complete photometric data (.ies format) available upon request) 15 ED, 000K-95+ Very Narrow Flood (VNF) Distribution, 18º T # umens: 866 Flood (F) Distribution, 5º T# umens: 796 ide Flood (F) Distribution, º T # umens: 7 Very ide Flood (VF) Distribution, 50º T # umens: Application Data: Very Narrow Flood Flood ide Flood Very ide Flood 0 o Aiming Angle Horizontal Footcandles D 0º CB Notes and Definitions: Beam spread is to 50% center beam candlepower (CBCP). D=Distance to floor or wall. =Footcandles on floor or wall at center beam aiming location. =Effective Visual Beam length in feet (50% of maximum footcandle level). =Effective Visual Beam width in feet (50% of maximum footcandle level). CB=Distance across or down to center beam location. 0 D CB IT /15/18 Page 8 of 1

9 Essenza Round Adjustable: FIXTURE DATA: (Complete photometric data (.ies format) available upon request) 15 ED, 000K-95+ Very Narrow Flood (VNF) Distribution, 18º T # umens: 780 Flood (F) Distribution, 5º T# umens: 699 ide Flood (F) Distribution, º T # umens: Application Data: ide Flood Flood Very Narrow Flood 0 o Aiming Angle Horizontal Footcandles D 0º CB Notes and Definitions: Beam spread is to 50% center beam candlepower (CBCP). D=Distance to floor or wall. =Footcandles on floor or wall at center beam aiming location. =Effective Visual Beam length in feet (50% of maximum footcandle level). =Effective Visual Beam width in feet (50% of maximum footcandle level). CB=Distance across or down to center beam location. 0 D CB IT /15/18 Page 9 of 1

10 Essenza Round ens all ash: FIXTURE DATA: (Complete photometric data (.ies format) available upon request) 15 ED, 000K-95+ ens all ash (R) Distribution T # umens: ZONA UMEN SUMMARY Zone umens %Fixt uminaire Efficacy: 6. lumens/watt Application Data: Footcandles on all Footcandles are average and rounded off. Data for multiple units are based on a minimum of five units. 1.5 Feet From all Feet From all 2 2 Distance from ceiling Distance from ceiling Feet From all 2 2 Distance from ceiling IT /15/18 Page 10 of 1

11 Essenza Round Shower: FIXTURE DATA: (Complete photometric data (.ies format) available upon request) 15 ED, 000K-95+ Very Narrow Flood (VNF) Distribution, 18º T # umens: 81 Flood (F) Distribution, 5º T# umens: 748 ide Flood (F) Distribution, º T # umens: Application Data: ide Flood Flood Very Narrow Flood 0 o Aiming Angle Horizontal Footcandles D 0º CB Notes and Definitions: Beam spread is to 50% center beam candlepower (CBCP). D=Distance to floor or wall. =Footcandles on floor or wall at center beam aiming location. =Effective Visual Beam length in feet (50% of maximum footcandle level). =Effective Visual Beam width in feet (50% of maximum footcandle level). CB=Distance across or down to center beam location. 0 D CB IT /15/18 Page 11 of 1

12 DIMMING COMPATIBIITY: Amerlux Essenza fixtures are compatible with all major dimming protocols prevalent in the United States. Please see below for general compatibilities and wiring diagrams. Amerlux recommends testing your unique dimming configuration as the exact full configuration (Dimmer, Fixture Quantity, Voltage, etc) may affect dimming performance. --- NOTE: INFORMATION BEO IS FOR IRED DIMMERS ONY. FOR IREESS DIMMERS, CONSUT FACTORY --- TRIAC (Forward Phase) DIMMING (Standard) Utilizes Standard incandescent dimmers that are in wide use in installations across the US. Best for retrofit applications where TRIAC dimmers are installed. Notes: 120V or 277V* Dims down to less than 5% light output (most cases) Consult Dimming manufacturer for installation instructions - DO NOT SHARE NEUTRAS! Must meet dimmer Minimum oad Requirements per dimming manufacturer Compatible Dimmers all Box (Incandescent Style, attage as required) utron Diva utron Vareo utron Nova-T utron Skylark utron Maestro TRIAC iring Diagram ine TRIAC Dimming Control Central System utron GP Panel utron Grafik Eye QS hite Green ine Driver V+ V- Red EV - Electronic ow Voltage (Reverse Phase) DIMMING (Standard) Utilizes specialized EV dimmers. Best for New Construction applications EV iring Diagram Notes: 120V or 277V* Dims down to less than 5% light output (most cases) EV ine Dimming Consult Dimming manufacturer for installation Control instructions - DO NOT SHARE NEUTRAS! Must meet dimmer Minimum oad Requirements Compatible Dimmers all Box (EV Style) utron Diva utron Nova-T utron Maestro eviton Surslide utron Vareo utron Skylark eviton Vizio hite Green Central System utron GP Panel with PHPM-PA Interface utron Grafik Eye QS with PHPM-PA Interface ine Driver V+ V- Red 0-10V - DIMMING (-0-10V Option) Integrates into a variety of building management and daylighting controls 0-10V iring Diagram Notes: 120V or 277V* Dims down to 1% light output Requires interface to turn off power to driver Consult Dimming manufacturer for installation instructions - DO NOT SHARE NEUTRAS! ine 0-10V Dimming Control Gray Purple hite Green Driver 0-10V (-) 0-10V (+) Switched Hot V+ V- Red Compatible Dimmers all Box utron Diva - DVTV with PP- 120H Interface eviton Renoir II 0-10v Central System utron Grafik Eye with GRX-TVI Interface Notes: * Driver is 277V dimmable with appropriate dimmer (by others). All provided wiring diagrams show 120V wiring colors and method. Please refer to 277V dimming installation instructions for 277V wiring diagrams. IT /15/18 Page 12 of 1

13 DIMMING COMPATIBIITY: Amerlux Essenza fixtures are compatible with all major dimming protocols prevalent in the United States. Please see below for general compatibilities and wiring diagrams. Amerlux recommends testing your unique dimming configuration as the exact full configuration (Dimmer, Fixture Quantity, Voltage, etc) may affect dimming performance. --- NOTE: INFORMATION BEO IS FOR IRED DIMMERS ONY. FOR IREESS DIMMERS, CONSUT FACTORY --- UTRON A-SERIES HI-UME / ECOSYSTEM (-DIM-HIUME Option) Integrates into utron EcoSystem building management -ire iring Diagram Notes: 120V or 277V* Dims down to less than 5% light output May use -ire or EcoSystem Control Consult Dimming manufacturer for installation instructions - DO NOT SHARE NEUTRAS! Cap unused ECOSYS wires ine -ire Phase Dimming Control Purple Stripe Purple Orange hite Green E1 E2 Driver Dimmed Hot Switched Hot V+ V- Red Compatible Dimmers all Box (-ire Fluorescent) DIVA Maestro Nova T Vareo Central System utron EcoSystem compatible controls EcoSystem Digital Control iring Diagram E2 E1 ECOSYS Bus EcoSystem Dimming Purple Stripe E1 Driver Control Purple E2 (Cap off Orange wire) Orange Dimmed Hot ine Switched Hot hite Green V+ V- Red Notes: * Driver is 277V dimmable with appropriate dimmer (by others). All provided wiring diagrams show 120V wiring colors and method. Please refer to 277V dimming installation instructions for 277V wiring diagrams. IT /15/18 Page 1 of 1