SAFJ LED SERIES S A L E D. Hazardous Location Compact LED

Size: px

Start display at page:

Download "SAFJ LED SERIES S A L E D. Hazardous Location Compact LED"

Alexia Chambers
5 years ago
Views:

1 SAFJ LED SERIES Hazardous Location Compact LED Class I, Division 2, Groups A, B, C, & D Class II, Division 1 & 2, Groups E & F Class III Simultaneous Presence Enclosed & Gasketed Wet Locations NEMA 3R, 4X IP66 UL 1598A Marine Outside Type UL 844 Hazardous Locations CUL ABS Type Approved Tested to LM 79 & LM 80 Standards 55 C Ambient Temperature US Patent # D637,340S S A FJ L E D 223

SAFJ LED SERIES Hazardous Location Compact LED Ballast housing and outlet boxes are high strength, corrosion resistant copperfree cast aluminum alloy. Compact size.

2 SAFJ LED SERIES Hazardous Location Compact LED Ballast housing and outlet boxes are high strength, corrosion resistant copperfree cast aluminum alloy. Compact size. Superior heat resistant silicone gaskets. Available with clear or frosted low profile globes. Corrosion resistant stainless steel wire guard. Suitable for installation in marine environments where equipment is subject to salt water spray, either indoor or outdoor. UL 844 Hazardous Locations UL 8750 LED Safety UL 1598A Marine Outdoor Enclosed and Gasketed Suitable for Wet Locations Suitable for Hose Down Applications 224 RIG-A-LITE

3 LED Catalog Number Logic SAFJ BASIC SERIES SAFJ LED Class I, Division 2, Groups A, B, C, & D Class II, Division 1 & 2, Groups E & F Class III Simultaneous Presence Enclosed & Gasketed Wet Locations UL1598A Marine Outside Type UL 844 Hazardous Locations NEMA 3R,4X IP66 CUL ABS Type Approved LAMP CURRENT/LAMP WATTAGE 06 = 45 Watt LAMP TYPE L = LED DRIVER VOLTAGE U = V 50/60HZ N = 347/480V 60HZ 6 7 GLOBE & GUARD LC = Low Profile Clear Globe LCG = Low Profile Clear Globe & Guard LF = Low Profile Frosted Globe LFG = Low Profile Frosted Globe & Guard MOUNTING STYLE P = ¾" Pendant Mount P1 = 1" Pendant Mount C = ¾" Ceiling Mount C1 = 1" Ceiling Mount W = ¾" Wall Mount W1 = 1" Wall Mount S = 1-¼" 25 Stanchion Mount S1 = 1-½" 25 Stanchion Mount L = 1-¼" 90 Stanchion Mount L1 = 1-½" 90 Stanchion Mount OPTIONS 1 SS = Stainless Steel Inserts SC = Safety Cable FB1 = Single Fuse Block FB2 = Double Fuse Block 1 Consult factory for pricing. 2 Not available with universal dirver unless incoming voltage is specified. When installed, one fuse block is provided for 120 & 277V and two fuse blocks are provided for 208, 220, 240, 347 and 480V. Fuse not provided. 3FB option not available for marine listed fixtures. Catalog logic is for explaining catalog number structure only. Not all combinations are possible; consult factory for catalog numbers not listed in charts

4 LED Certification Guide Model Watts Type Ambient Temperature C Class I, Div. 2, Groups A, B, C, D Class II, Div. 1 Groups E & F, Class III Simultaneous Presence Supply Wire Suitable UL1598A Outdoor Temp C SAFJ06L 45 LED 40 T3A T3A T3 90 YES YES SAFJ06L 45 LED 55 T3A T3A T3 105 YES YES CUL 226 RIG-A-LITE 226

LED Clear Globe and Guard Mounting Style Conduit Size (in.

) Ballast Housing CONSISTS OF Outlet Box Globe Guard RIGID

5 SAFJ06LU JMP JGL10 JGU10 1 SAFJ06-L-U-LCG-P1 9.

SAFJ06-L-U-LCG-C 9 SAFJ06LU JMC JGL10 JGU10 1

5 SAFJ06LU JMW1 JGL10 JGU10 25 STANCHION MOUNT 1-1/4

5 SAFJ06LU JMS JGL10 JGU10 1-1/2 SAFJ06-L-U-LCG-S1 10.

5 LED Clear Globe and Guard Mounting Style Conduit Size (in.) Catalog Number 120/208/240/277V Shipping Weight (lbs.) Ballast Housing CONSISTS OF Outlet Box Globe Guard RIGID PENDANT 3/4 SAFJ06-L-U-LCG-P 9.5 SAFJ06LU JMP JGL10 JGU10 1 SAFJ06-L-U-LCG-P1 9.5 SAFJ06LU JMP1 JGL10 JGU10 CEILING MOUNT 3/4 SAFJ06-L-U-LCG-C 9 SAFJ06LU JMC JGL10 JGU10 1 SAFJ06-L-U-LCG-C1 9 SAFJ06LU JMC1 JGL10 JGU10 WALL MOUNT 3/4 SAFJ06-L-U-LCG-W 11.5 SAFJ06LU JMW JGL10 JGU10 1 SAFJ06-L-U-LCG-W SAFJ06LU JMW1 JGL10 JGU10 25 STANCHION MOUNT 1-1/4 SAFJ06-L-U-LCG-S 10.5 SAFJ06LU JMS JGL10 JGU10 1-1/2 SAFJ06-L-U-LCG-S SAFJ06LU JMS1 JGL10 JGU10 90 STANCHION MOUNT 1-1/4 SAFJ06-L-U-LCG-L 12 SAFJ06LU JML JGL10 JGU10 1-1/2 SAFJ06-L-U-LCG-L1 12 SAFJ06LU JML1 JGL10 JGU10 Refer to Certification Guide to determine suitability of individual fixture

6 LED Frosted Globe and Guard Mounting Style Conduit Size (in.) Catalog Number 120/208/240/277V Shipping Weight (lbs.) Ballast Housing CONSISTS OF Outlet Box Globe Guard RIGID PENDANT 3/4 SAFJ06-L-U-LFG-P 9.5 SAFJ06LU JMP FJGL10 JGU10 1 SAFJ06-L-U-LFG-P1 9.5 SAFJ06LU JMP1 FJGL10 JGU10 CEILING MOUNT 3/4 SAFJ06-L-U-LFG-C 9 SAFJ06LU JMC FJGL10 JGU10 1 SAFJ06-L-U-LFG-C1 9 SAFJ06LU JMC1 FJGL10 JGU10 WALL MOUNT 3/4 SAFJ06-L-U-LFG-W 11.5 SAFJ06LU JMW FJGL10 JGU10 1 SAFJ06-L-U-LFG-W SAFJ06LU JMW1 FJGL10 JGU10 25 STANCHION MOUNT 1-1/4 SAFJ06-L-U-LFG-S 10.5 SAFJ06LU JMS FJGL10 JGU10 1-1/2 SAFJ06-L-U-LFG-S SAFJ06LU JMS1 FJGL10 JGU10 90 STANCHION MOUNT 1-1/4 SAFJ06-L-U-LFG-L 12 SAFJ06LU JML FJGL10 JGU10 1-1/2 SAFJ06-L-U-LFG-L1 12 SAFJ06LU JML1 FJGL10 JGU10 Refer to Certification Guide on page 154 to determine suitability of individual fixture. 228 RIG-A-LITE 228

7 LED Candlepower Distribution Deg Parl Norm Total Lumens 2773 Input Power 45 (watts) Efficacy 61.5 (Lumens/Watt) CRI 69 CCT 5646 Candlepower Distribution Deg Parl Norm Total Lumens 3263 Input Power 45.1 (watts) Efficacy 72.4 (Lumens/Watt) CRI 69 CCT

8 LED 230 RIG-A-LITE 230

9 Accessories LED Outlet Boxes Rigid Pendant Catalog No. Conduit Hub Size (In.) Shipping Weight (Lbs.) JMP ¾ 3.0 Globes And Guards Guard Catalog No. JGU10 Description Shipping Weight (Lbs.) Stainless Steel Wire Guard 1.0 Ceiling Mount JMP JMF ¾ 3.0 Clear Globe Frosted Globe JGL10 FJGL10 Low Profile Clear Globe Low Profile Frosted Globe JMF Wall Mount JMC ¾ 3.2 JMC Stanchion Mount JMW ¾ 6.0 JMW Stanchion Mount JMS 1-¼ 5.0 JMS1 1-½

10 Accessories LED Outlet Boxes Rigid Pendant Catalog No. Conduit Hub Size (In.) Shipping Weight (Lbs.) JMP ¾ 3.0 Reflectors, Globes And Guards Dome Reflector Catalog No. JD15 Description Standard Dome Reflector Molded Polycarbonate Shipping Weight (Lbs.) 0.8 Ceiling Mount JMP JMF ¾ 3.0 Angle Reflector JA15 30 Angle Reflector Molded Polycarbonate 1.9 Guard JMF JGU10 Stainless Steel Wire Guard 1.0 Wall Mount JMC ¾ 3.2 Clear Globe JGL10 Low Profile Clear Globe 2.0 JMC Frosted Globe FJGL10 Low Profile Frosted Globe Stanchion Mount JMW ¾ 6.0 JMW Stanchion Mount JMS 1-¼ 5.0 JMS1 1-½

11 INSTALLATION DATA SHEET SAFJ LED SERIES LED LUMINAIRE FOR USE IN Class I Division 2 Groups A, B, C, D; Class II Groups E, F, G; Class III WARNING! 1. To reduce risk of fire or explosion, do not install where the marked operating temperature exceeds the ignition temperature of the hazardous atmosphere(s). 2. These Luminaire Fittings should be installed by qualified technicians using suitable hazardous locations wiring methods in strict accordance with the National Electrical Code, NFPA 70 and any local requirements. 3. To prevent risk of electrical shock deactivate/ disconnect power supply before opening. Keep tightly closed when in operation. SAFJ LED SERIES FIXTURE WHEN COMPLETELY ASSEMBLED WITH (1) GLOBE AND (1) OUTLET BOX (MOUNTING COVER). GUARD AND REFLECTORS ARE OPTIONAL. SEE TABLE BELOW. instructions provided with the outlet box (mounting cover) for details. 4. Hang the luminaire housing Fig.1 on the outlet box (mounting cover) hinge. OUTLET BOXES (MOUNTING COVERS) (ONE REQUIRED) JMP, JMP1, JMF, JMF1, JMC, JMC1, JMW, JMW1, JMS, JMS1, JML, JML1 OPTICS (ONE REQUIRED) GLOBE - JGL10, FJGL10 OPTIONS GUARD - JGU15 EXTERNAL RELFECTORS - JA15, JD15 INSTALLATION: 1. Before installing, check the carton label and luminaire ballast housing label to insure that you have the correct luminaire fittings. 2. BEFORE INSTALLING, MAKE SURE THAT THE CIRCUIT IS DEACTIVATED. 3. Using Fig. 1 as your guide, install the outlet box (mounting cover) securely. Refer to the outlet box (mounting cover) installation FIGURE 1 5. Install the luminaire housing green (ground) lead on the outlet box (mounting cover) using the provided green screw to secure it in place. 6. Power leads are clearly marked. Select the correct voltage leads as determined by the supply voltage to the luminaire and install the incoming black and white leads to the respective driver leads using the wire nuts provided. Rig-A-Lite Tel: (713) Visit us at: 8500 Hansen Rd Fax: (713) Houston, TX info@rigalite.com SAFJ May 2011 Rev.0

12 7. Close the luminaire housing against the outlet box (mounting cover) securely by tightening the screw provided with the ballast housing. 8. Install the globe, reflector and guard if needed. INSTALLATION DATA SHEET SAFJ LED SERIES FIGURE 2 OPERATION: 1. Operate the complete assembled luminaire at its rated voltage and frequency. See the luminaire housing label for this data. MAINTENANCE DATA: CAUTION: DISCONNECT THE SUPPLY CIRCUIT BEFORE OPENING THE LUMINAIRE 1. Although no routine maintenance is required to keep this luminaire functional, it is recommended that the globe be kept clean for optimum performance. 2. When parts wear out or become defective due to adverse environment or due to normal aging process contact Rig-A-Lite for replacement information. Rig-A-Lite Tel: (713) Visit us at: 8500 Hansen Rd Fax: (713) Houston, TX info@rigalite.com SAFJ May 2011 Rev.0

LED Features Glare Free Performance with frosted globe Replaces up to 70 watt Metal Halide and 70 watt High Pressure Sodium 60,000 or more hours rated lamp life with 70% lumen maintenance Constant

13 LED Features Glare Free Performance with frosted globe Replaces up to 70 watt Metal Halide and 70 watt High Pressure Sodium 60,000 or more hours rated lamp life with 70% lumen maintenance Constant Current V 50/60Hz 347/480V 60Hz Total Efficacy of 72.4 Lm/W with Clear Globe Line Transient Protection: 4 KV line to line 2 KV line to ground Mounting & Lens Options Mounting Styles Include Stanchion (25 and 90 ) Wall Ceiling Pendant Flexible Pendant Lens Options Include Low Profile Clear Globe* Low Profile Frosted Globe* * Patent # D637340S Certifications Class I, Division 2, Groups A, B, C & D Class II, Division 1 & 2, Groups E & F Class III Simultaneous Presence Enclosed and Gasketed NEMA 3R, 4X UL 1598A, 8750 CUL IP 66 Tested to LM79 & LM80 standards Standard Materials Copper Free Cast Aluminum Alloy Housing Epoxy Powder Coated Stainless Steel Hardware Tempered Glass Globe Stainless Steel Guard Silicone Gaskets Model Watts Type Ambient Temperature C Class I, Div. 2, Groups A, B, C, D Class II, Div. 1 Groups E & F, Class III Simultaneous Presence Supply Wire Suitable UL1598A Outdoor Temp C SAFJ06L 45 LED 40 T3A T3A T3 90 YES YES SAFJ06L 45 LED 55 T3A T3A T3 105 YES YES CUL 18

LED Catalog Number Logic SAFJ 06-L-U - LC-P-XX 1 2 3 4 5 6 7 1 5 2 3 4 BASIC SERIES SAFJ LED Class I, Division 2, Groups A, B, C & D Class II, Division 1 & 2, Groups E & F Class III Simultaneous

14 LED Catalog Number Logic SAFJ 06-L-U - LC-P-XX BASIC SERIES SAFJ LED Class I, Division 2, Groups A, B, C & D Class II, Division 1 & 2, Groups E & F Class III Simultaneous Presence Enclosed & Gasketed Wet Locations UL1598A Marine Outside Type UL 844 Hazardous Locations NEMA 3R, 4X IP66 CUL LAMP CURRENT/LAMP WATTAGE 06 = 45 Watt LAMP TYPE L = LED DRIVER VOLTAGE U = V 50/60HZ N = 347/480V 60HZ 6 7 GLOBE & GUARD LC = Low Profile Clear Globe LCG = Low Profile Clear Globe & Guard LF = Low Profile Frosted Globe LFG = Low Profile Frosted Globe & Guard MOUNTING STYLE P = ¾" Pendant Mount P1 = 1" Pendant Mount C = ¾" Ceiling Mount C1 = 1" Ceiling Mount W = ¾" Wall Mount W1 = 1" Wall Mount S = 1-¼" 25 Stanchion Mount S1 = 1-½" 25 Stanchion Mount L = 1-¼" 90 Stanchion Mount L1 = 1-½" 90 Stanchion Mount OPTIONS 1 SS = Stainless Steel Inserts 1 Consult factory for pricing. Catalog logic is for explaining catalog number structure only. Not all combinations are possible; consult factory for catalog numbers not listed in charts. 19

SAFR LED SERIES S A F R L E D. Hazardous Location LED Luminaire

SAFR LED SERIES S A F R L E D. Hazardous Location LED Luminaire SAFR LED SERIES Hazardous Location LED Luminaire Class I, Division 2, Groups A, B, C & D Class II, Division & 2, Groups E, F & G Class III Class I, Zone 2, Groups IIA, IIB & IIC UL 8750 LED Safety UL 844