Replacement. Metal Halide CR2000. Product Wattage CCT Total Lumen Efficacy Voltage Frequency Base Installation Angle

Size: px

Start display at page:

Download "Replacement. Metal Halide CR2000. Product Wattage CCT Total Lumen Efficacy Voltage Frequency Base Installation Angle"

Paul Phelps
5 years ago
Views:

LED HIGH BAY 80W FEATURES LED replacement for 250W Metal Halide Lamp Energy saving up to 68% than conventional lighting 3 years standard warranty Ultra light and compact lamp Flicker free Ultraviolet

1 LED HIGH BAY 80W FEATURES LED replacement for 250W Metal Halide Lamp Energy saving up to 68% than conventional lighting 3 years standard warranty Ultra light and compact lamp Flicker free Ultraviolet free, no mercury and lead-free RoHS Compliance Safety is ensured with a durable surge protector The volume of electrolytic capacitor is maximized SPECIFICATION Dimension : Ø 276 x 170 Weight : 1.7 kg (3.7 lbs) Housing : ABS Operating Temperature : -20 ~40 (-4 ~104 ) Power Factor(PF) : > 0.9 THD : < 15% CRI : 82 Ra LED Package Life Time : over 50,000 Replacement Metal Halide High Pressure Sodium Halogen 80 W 250 W 500W 800W Beam Angle 90 (Standard) 97 (Diffuser Plate 1) 134 (Dome Diffuser) 30, 45, 60 (Lens) Standard Product Wattage CCT Total Lumen Efficacy Voltage Frequency Base Installation Angle 80W WHY ICEPIPE 2700 K 3000 K 4000 K 5000 K 5700 K 9,200 lm 115 lm/w 9,680 lm 121 lm/w AC V 50 / 60 Hz E 39 0 Ultra-Light & Retrofit High Bay became even easier to install, thanks to the breakthrough in design that guarantees its dramatically compact retrofit fixture of 1.7 kg (3.7 lbs). Just simply insert it into the existing sockets and turn firmly for installation. Highly Efficient ICEPIPE heatsink ICEPIPE heatsink was created by our patented Fluid Dynamic Pressure Technology, which enables heat dissipation 200 times faster (40,000 W/m K) than that of conventional aluminum (Al) heatsink. Liquid circulation takes place inside the pipe, traveling through the coil and cooling down heat from the LEDs in the most efficient way. Other companies 1.7 kg Internal driver Super light even with its internal driver Excellent durability via ABS housing Easy to install Heat sink The fastest heat transfer rate Efficient air flow Uses light weight copper

(Reattach or replace ground lead if needed.) Step : 3 Refer to Figure 3 Fix the LED into the corresponding socket.

2 INSTALLATION Step : 1 Refer to Figure 1 Turn off the power before installation. Remove the old ballast, capacitor and ignitor (if existing) Step : 2 Refer to Figure 2 Make sure the alternating current wires are connected to the E39 or Ex39 socket directly. (Reattach or replace ground lead if needed.) Step : 3 Refer to Figure 3 Fix the LED into the corresponding socket. APPLICATION OPTION Factory Warehouse Gymnasium Auditorium Distribution Lens type Diffuser plate Dome diffuser center 30, 45, PACKING Dimension Packing Carton Size Pallet size Φ 226 Φ Pallet 1 * 3R * 3R * 9L = 81 pcs Type Single Unit Box Pallet 20ft Container-Palletized Quantity Dimension(mm) x x 200 x x x 2348 x 2390 GWT(kg) CBM WARNINGS DC Do not use with direct current and ballast. This lamp is non-dimmable, do not connect with dimmer. This lamp must be installed straight downward and cannot be installed in different orientation. Do not install the lamp in an enclosed space. Do not install on any other shade that is not provided by ICEPIPE. Please read the instruction manual carefully before installation.

3 LED HIGH BAY 100W FEATURES LED replacement for 250W Metal Halide Lamp Energy saving up to 60% than conventional lighting 3 years standard warranty Ultra light and compact lamp Flicker free Ultraviolet free, no mercury and lead-free RoHS Compliance Safety is ensured with a durable surge protector The volume of electrolytic capacitor is maximized SPECIFICATION Dimension : Ø 276 x 170 Weight : 1.7 kg (3.7 lbs) Housing : ABS Operating Temperature : -20 ~40 (-4 ~104 ) Power Factor(PF) : > 0.9 THD : < 15% CRI : 82 Ra LED Package Life Time : over 50,000 Replacement Metal Halide High Pressure Sodium Halogen 100 W 250 W 500W 800W Beam Angle 90 (Standard) 97 (Diffuser Plate 1) 134 (Dome Diffuser) 30, 45, 60 (Lens) Standard Product Wattage CCT Total Lumen Efficacy Voltage Frequency Base Installation Angle 100 W WHY ICEPIPE 2700 K 3000 K 4000 K 5000 K 5700 K 11,800 lm 118 lm/w 12,400 lm 124 lm/w AC V 50 / 60 Hz E 39 0 Ultra-Light & Retrofit High Bay became even easier to install, thanks to the breakthrough in design that guarantees its dramatically compact retrofit fixture of 1.7 kg (3.7 lbs). Just simply insert it into the existing sockets and turn firmly for installation. Highly Efficient ICEPIPE heatsink ICEPIPE heatsink was created by our patented Fluid Dynamic Pressure Technology, which enables heat dissipation 200 times faster (40,000 W/m K) than that of conventional aluminum (Al) heatsink. Liquid circulation takes place inside the pipe, traveling through the coil and cooling down heat from the LEDs in the most efficient way. Other companies 1.7 kg Internal driver Super light even with its internal driver Excellent durability via ABS housing Easy to install Heat sink The fastest heat transfer rate Efficient air flow Uses light weight copper

4 INSTALLATION Step : 1 Refer to Figure 1 Turn off the power before installation. Remove the old ballast, capacitor and ignitor (if existing) Step : 2 Refer to Figure 2 Make sure the alternating current wires are connected to the E39 or Ex39 socket directly. (Reattach or replace ground lead if needed.) Step : 3 Refer to Figure 3 Fix the LED into the corresponding socket. APPLICATION OPTION Factory Warehouse Gymnasium Auditorium Distribution Lens type Diffuser plate Dome diffuser center 30, 45, PACKING Dimension Packing Carton Size Pallet size Φ 226 Φ Pallet 1 * 3R * 3R * 9L = 81 pcs Type Single Unit Box Pallet 20ft Container-Palletized Quantity Dimension(mm) x x 200 x x x 2348 x 2390 GWT(kg) CBM WARNINGS DC Do not use with direct current and ballast. This lamp is non-dimmable, do not connect with dimmer. This lamp must be installed straight downward and cannot be installed in different orientation. Do not install the lamp in an enclosed space. Do not install on any other shade that is not provided by ICEPIPE. Please read the instruction manual carefully before installation.

5 LED HIGH BAY 130W L+ FEATURES LED replacement for 400W Metal Halide Lamp Energy saving up to 68% than conventional lighting 3 years standard warranty Ultra light and compact lamp Flicker free Ultraviolet free, no mercury and lead-free RoHS Compliance Safety is ensured with a durable surge protector The volume of electrolytic capacitor is maximized SPECIFICATION Dimension : Ø 276 x 170 Weight : 1.7 kg (3.7 lbs) Housing : ABS Operating Temperature : -20 ~40 (-4 ~104 ) Power Factor(PF) : > 0.9 THD : < 15% CRI : 82 Ra LED Package Life Time : over 50,000 Replacement Metal Halide High Pressure Sodium Halogen 130 W L+ 400 W 500W 800W Beam Angle 90 (Standard) 97 (Diffuser Plate 1) 134 (Dome Diffuser) 30, 45, 60 (Lens) Standard Product Wattage CCT Total Lumen Efficacy Voltage Frequency Base Installation Angle 130 W L+ WHY ICEPIPE 2700 K 3000 K 4000 K 5000 K 5700 K 14,820 lm 114 lm/w 15,600 lm 120 lm/w AC V 50 / 60 Hz E 39 0 Ultra-Light & Retrofit High Bay became even easier to install, thanks to the breakthrough in design that guarantees its dramatically compact retrofit fixture of 1.7 kg (3.7 lbs). Just simply insert it into the existing sockets and turn firmly for installation. Highly Efficient ICEPIPE heatsink ICEPIPE heatsink was created by our patented Fluid Dynamic Pressure Technology, which enables heat dissipation 200 times faster (40,000 W/m K) than that of conventional aluminum (Al) heatsink. Liquid circulation takes place inside the pipe, traveling through the coil and cooling down heat from the LEDs in the most efficient way. Other companies 1.7 kg Internal driver Super light even with its internal driver Excellent durability via ABS housing Easy to install Heat sink The fastest heat transfer rate Efficient air flow Uses light weight copper

6 INSTALLATION Step : 1 Refer to Figure 1 Turn off the power before installation. Remove the old ballast, capacitor and ignitor (if existing) Step : 2 Refer to Figure 2 Make sure the alternating current wires are connected to the E39 or Ex39 socket directly. (Reattach or replace ground lead if needed.) Step : 3 Refer to Figure 3 Fix the LED into the corresponding socket. APPLICATION OPTION Factory Warehouse Gymnasium Auditorium Distribution Lens type Diffuser plate Dome diffuser center 30, 45, PACKING Dimension Packing Carton Size Pallet size Φ 226 Φ Pallet 1 * 3R * 3R * 9L = 81 pcs Type Single Unit Box Pallet 20ft Container-Palletized Quantity Dimension(mm) x x 200 x x x 2348 x 2390 GWT(kg) CBM WARNINGS DC Do not use with direct current and ballast. This lamp is non-dimmable, do not connect with dimmer. This lamp must be installed straight downward and cannot be installed in different orientation. Do not install the lamp in an enclosed space. Do not install on any other shade that is not provided by ICEPIPE. Please read the instruction manual carefully before installation.

Replacement. Metal Halide OB150S. Product Wattage CCT Total Lumen Efficacy Voltage Frequency Base Installation Angle

Replacement. Metal Halide OB150S. Product Wattage CCT Total Lumen Efficacy Voltage Frequency Base Installation Angle LED BULB OB150S 35W FEATURES LED replacement for 70~100 W Metal Halide Lamp Energy Saving up to 65% than conventional lighting Improved efficiency of 130 lm/w 2 years standard warranty Ultra-light and