Mercmaster LED Series Luminaires Enclosed and Gasketed Fixtures
|
|
|
- Ferdinand Cole
- 6 years ago
- Views:
Transcription
1 ATEX/IECEx: Zone 2 and 22 II 2 GD Lighting LIGHTING: ENCLOSED AND GASKETED AREA LED/INDUCTION Applications Enclosed and gasketed fixtures suitable for use in: Marine and wet locations A wide range of industrial, chemical processing and other areas where flammable gases and vapors are present Areas of low clearance, low ceiling heights or where fixture weights must be minimized Non-hazardous locations where severe weather conditions, excessive moisture, dirt, dust, corrosive atmosphere or high ambient temperatures are encountered Typical applications include: Pulp and paper mills Processing plants Chemical plants Oil refineries Foundries Manufacturing plants Storage areas Waste and sewage treatment Parking garages Other areas where dust, water, dirt and rough usage are a problem Features Compact light weight low profile design is suited for low mounting heights. Modular design allows scores of fixture component combinations to meet installation needs. Uses same mounting hoods as Mercmaster III. Fixture housing and mounting hoods are copperfree cast aluminium with baked epoxy finish. All exposed hardware is stainless steel. Accommodates a wide range of voltages. Ambient temperatures: 70 W to 100 W equivalent: -40 C to +65 C (-40 F to +149 F) 150 W to 175 W equivalent: -40 C to +55 C (-40 F to +131 F) 250 W equivalent: -40 C to +50 C (-40 F to +122 F) Electrical: ; Vac,, Volts +/- 10% Pole terminal block: 1 x 8-24 AWG; 1 x 0.75 to 6 mm 2 ( to in 2 ). Hinge has high lip for added safety during installation and servicing. Hinge and bolt construction assures 360º compression at all points on ballast housing gasket for positive sealing. Swing away design of captive bolt and nut simplifies servicing. All Mercmaster mounting hoods have provision for easy field installation of fuses in fixtures (see Fixture Unit Electrical Specification). NPT and metric threads standard. NEMA Type V light distribution is standard. NEMA Type I is available as an option for select NEC/CEC certified fixtures. For ATEX/IECEx rated fixtures, ballast bodies and mounting hoods must be purchased separately. Standard Materials Mounting hoods and bodies: cast copperfree (4/10 of 1% max.) aluminium All hardware and catch assemblies: stainless steel Globe: polycarbonate Standard Finishes Mounting hoods, bodies and guards: baked gray epoxy-clad finish, electrostatically applied for complete uniform protection NEC/CEC Certifications and Compliances UL Standard: UL 1598, UL 1598A, UL 8750, UL 844 CSA Standard: C22.2 No , C22.2 No. 137 ccsaus Certified: ATEX/IECEx Certifications and Compliances ATEX Gas: Zone 2 Conforming to ATEX 94/9/CE: CE 0081 II 3 G ATEX Protection: Ex na IIC Gc T Rating: 70 W and 100 W equivalent: T4 [+40 ºC(+104 ºF)], T4 (131 F/55 C), T3 [+65 C (+149 F)] 150 W to 175 W equivalent: T4 [+40 ºC(+104 ºF)], T4 [+ 55 C (+131 F)] 250 W equivalent: T4 [+40 ºC (+104 ºF)], T4 [+50 C (+122 F)] Dust: Zone 22 Conforming to ATEX 94/9/CE: CE 0081 II 3 D ATEX Protection: Ex tc IIIc Dc Surface Temperature: T92 ºC (T197.6 ºF) Ambient Temperature: 70 W and 100 W equivalent: -40 C to +65 C (-40 F to +149 F) 150 W to 175 W equivalent: -40 C to +55 C (-40 F to +131 F) 250 W equivalent: -40 C to +50 C (-40 F to +122 F) ATEX Certificate: LCIE II ATEX 1008/01 Index of Protection: IP66 4
2 ATEX/IECEx: Zone 2 and 22 II 2 GD IECEx Gas: Zone 2 IEC Protection: Ex na IIC Gc T Rating: 70 W and 100 W equivalent: T4 [+40 ºC (+104 ºF)], T4 [+ 55 C (+131 F)], T3 [+65 C (+149 F)] 150 W to 175 W equivalent: T4 [+40 ºC (+104 ºF)], T4 [+ 55 C (+131 F)] 250 W equivalent: T4 [+40 ºC (+104 ºF)], T4 [+50 C (+122 F) Dust: Zone 22 IEC Protection: Ex tc IIIc Dc Surface Temperature: T92 ºC (T197.6 ºF) Ambient Temperature: 70 W and 100 W equivalent: -40 C to +65 C (-40 F to +149 F) 150 W to 175 W equivalent: -40 C to +55 C (-40 F to +131 F) 250 W equivalent: -40 C to +50 C (-40 F to 122 F) IECEx Certificate: IECEx LCI II.0058 Index of Protection: IP66 Ex Standards: IEC ; ; Related Products NEC, Class I, Division 2 photocells for classified use are available, see PCD2 Series. Mounting hoods With photocontrols are not rated Lighting LIGHTING: ENCLOSED AND GASKETED AREA LED/INDUCTION 5
3 ATEX/IECEx: Zone 2 and 22 II 2 GD Illustrated Features Lighting Heatsink Reliable heat transfer via the cast, epoxy powder coat aluminium body. Provides maximum heat dissipation from the LED assembly to the outside environment. Driver Assembly Utilizing non-sparking components avoiding the ignition of gases or vapors that may be present (na). Modular Plug between LED and driver. LED Chamber Protected by polycarbonate lens, allows for easy maintenance access. LIGHTING: ENCLOSED AND GASKETED AREA LED/INDUCTION Fuses Two screws secure fuse kit to mounting boss in any Mercmaster mounting hood. Fuse included. Photocell Available for all fixtures except cone and ceiling mount. Installs through knock-out in mounting hood. Provides continuous ON-OFF dusk-to-dawn control. Terminal Blocks (Zone 2) A seven-point terminal block is provided to facilitate wiring. Terminal block accommodates wire size ranging from #8 to #24AWG, 0.75 to 6 mm² ( to in 2 ) Epoxy Finish Ballast housing, hoods and guards are copperfree aluminium with epoxy powder coat finish. Electrical Protection Ground wire provided to bond mounting hood to ballast housing. Safety Rounded heatsink edges prevent possible injury during installation. Cooler Operating Cone Hood Larger sloped surface sheds dusts, dirt and combustible fibers providing better heat dissipation. Mounting Hood and Globe Gaskets Silicone rubber gaskets seals out moisture, dirt and dust. Stays flexible, withstands high temperatures. Closure design assures uniform gasket compression. "Safety" High Hinge Extra-high hinge provides additional protection against accidental ballast housing disengagement during installation or maintenance. Stainless Steel Latch Assembly Captive, stainless steel latch assembly bolt and nut closes securely, resists attack of corrosive atmospheres. Swing-away design simplifies servicing. 6
4 ATEX/IECEx: Zone 2 and 22 II 2 GD Order using catalog numbering guides below or select catalog number from tables on following pages. Catalog Numbering Guide NEC/CEC Certified Mercmaster LED MLEDN A 17 2 P 5 H1 MLEDN - NEC/CEC Certified Mercmaster LED Series Light Level Equivalent: W HPS/PSMH W HPS/PSMH W HPS/PSMH W PSMH W HPS/PSMH Optical Assembly: P - Polycarbonate Globe Voltage: - Universal Voltages BH Vac, Mounting: A - Pendant C - Ceiling D - Pendant Cone R - 90º Stanchion S - 25º Stanchion W - Wall Hub Size: 2-3/4 NPT 3-1 NPT 4-1-1/4 NPT stanchion 5-1-1/2 NPT stanchion 6 - Metric M20 Catalog Numbering Guide ATEX/IECEx Certified Mercmaster LED Light Distribution: 1 - NEMA Type I Elliptical (100 W HPS and 175 W PSMH Only) 5 - NEMA Type V Symmetrical Options: D - Diffused Globe F - Fusing H1 - Photocontrol 120 V H2 - Photocontrol 208 V H3 - Photocontrol 240 V H4 - Photocontrol 277 V MLEDNA 17 P 5 D MLEDNA - ATEX/IECEx Certified Mercmaster LED Series Mounting: ATEX/IECEx version is not available as a complete fixture (not sold with mounting hood) Light Level Equivalent: W HPS/PSMH W HPS/PSMH W HPS/PSMH W PSMH Hub Size: ATEX/IECEx version is not available as a complete fixture (hub size does not apply) Optical Assembly: P - Polycarbonate Globe Light Distribution: 5 - NEMA Type V Symmetrical Voltage: - Universal Voltages Options: D - Diffused Globe Lighting LIGHTING: ENCLOSED AND GASKETED AREA LED/INDUCTION Ceiling mount luminaries are not designed to use the PCD2 photocontrol. Ceiling mounts must use an FS/FD box with a photocontrol. Contact your local sales representative for more information. 175 W Pulse Start Metal Halide only. Does not have a High Pressure Sodium equivalent. Canadian Electrical Code does NOT allow fusing in hazardous locations V. Fuse not CEC rated. Luminaires with photocontrol are not rated or marine outside type (salt water). For ATEX/IECEx rated fixtures, ballast bodies and mounting hoods must be purchased separately. 7
5 ATEX/IECEx: Zone 2 and 22 II 2 GD Technical Data Lamp Light Level Equivalent to HID 70 Watt NEMA Type V Type LED Ambient Temperature C ( F) Supply Wire Temperature C ( F) Class I, Division 2 40 (104) 60 (140) T4A NEC/CEC ATEX/IECEx Gas Dust Gas/Dust Gas Dust Class I, Zone 2, Class II, Simultaneous AEx na IIC, Division 1 Class I, Division 2/ Ex II 3G Ex II 3D Groups Ex na IIC and 2 Groups Class II, Division 1 na Ex tc IIIC T4 55 (131) 75 (167) T4 A, B, C, D T4 T6 E, F, G T4 T4 65 (143) 90 (194) T3C T3 T6 T3C T4 T6 T4 T4 T92 C (T197.6 F) DC Lighting 100 Watt NEMA Type V LED 40 (104) 60 (140) T4A T4 T6 T4 T4 55 (131) 75 (167) T4 A, B, C, D T4 T6 E, F, G T4 T4 65 (143) 90 (194) T3C T3 T6 T3C T4 T92 C (T197.6 F) DC LIGHTING: ENCLOSED AND GASKETED AREA LED/INDUCTION 100 Watt NEMA Type I 150 Watt NEMA Type V 175 Watt NEMA Type V 175 Watt NEMA Type I 250 Watt NEMA Type V T Numbers Represent the Maximum Internal Temperature or Maximum Surface Temperature NEC/CEC T # T T2 T2A T2B T2C T2D T3 T3A T3B T3C T4 T4A T5 T6 Temp. Range ºC (ºF) LED LED LED LED LED ( ) 40 (104) 60 (140) T4 75 (167) 75 (167) T3C A, B, C, D T3 E, F, G ( ) ( ) ( ) ( ) ( ) ( ) ( ) T ( ) ( ) ( ) ( ) 90 (194) 90 (194) T3C T3 40 (104) 60 (140) T4A T4 T6 T4 T6 T92 C A, B, C, D E, F, G (T197.6 F) DC 55 (131) 75 (167) T4 T4 T6 T4 T6 IP66 40 (104) 60 (140) T4A T4 T6 T4 T6 T92 C A, B, C, D E, F, G (T197.6 F) DC 55 (131) 75 (167) T4 T4 T6 T4 T6 IP66 40 (104) 60 (140) T4 T4 T5 T4 A, B, C, D E, F, G 55 (131) 75 (167) T3C T3 T5 T3C 40 (104) 60 (140) T4A T4 T6 T4A A, B, C, D E, F, G 50 (122) 75 (167) T4 T4 T6 T ( ) ( ) ( ) 85 (185) ATEX/IECEx T # T1 T2 T3 T4 T5 T6 Temp. Range ºC (ºF) ( ) ( ) ( ) ( ) ( ) 85 (185) T numbers represent the maximum internal temperature for Class I, Division 2 and Class I, Zone 2 locations designated by the NEC. T numbers represent the maximum surface temperature under a dust blanket for Class II, Division 1 and Class I, Zone 2 as designated by the NEC or Zone 2 (Gas) and 22 (Dust) locations as designated by the IEC. 8
6 ATEX/IECEx: Zone 2 and 22 II 2 GD Lamp Comparison Chart Lamp Data Line Current Amps Input Power Lumens CRI Lamp Life (Hours) Color Temp CCT NEMA Type V MLEDN V 277 V 120 V 277 V , , V 61 MLEDN , V 120 V V , V 95.5 MLEDN , V 92 NEMA Type 120 V 46.7 MLEDN , V 120 V 70 MLEDN , V 69 Mercmaster LED Ballast and Mounting Hood Weights Description Weight kg (lb) Fixture Unit (Ballast Housing) 8.8 (19.4) Pendant Mounting Hood 1.0 (2.25) Pendant Cone Mounting Hood 1.1 (2.50) Ceiling Mounting Hood 1.4 (3.00) Wall Mounting Hood 1.8 (4.00) Lighting LIGHTING: ENCLOSED AND GASKETED AREA LED/INDUCTION 25 Stanchion Mounting Hood 1.5 (3.25) 90 Stanchion Mounting Hood 1.7 (3.75) 9
7 Pendant One Hub, Rigid Mounting LED Wattage /BH Lamp Wattage Equivalent NEMA Type Hub Size Conformance Catalog Numbers 35/33 W 70 W HPS/PSMH Type V 3/4 NEC/CEC MLEDNA702P5 47.5/46 W 100 W HPS/PSMH Type V 3/4 NEC/CEC MLEDNA102P5 46.7/46.6 W 100 W HPS/PSMH Type I 3/4 NEC/CEC MLEDNA102P1 61/62 W 150 W HPS/PSMH Type V 3/4 NEC/CEC MLEDNA152P5 74/72 W 175 W PSMH Type V 3/4 NEC/CEC MLEDNA172P5 70/64 W 175 W PSMH Type I 3/4 NEC/CEC MLEDNA172P1 95.5/92 W 250 W HPS/MH Type V 3/4 NEC/CEC MLEDNA252P5 Lighting 35/33 W 70 W HPS/PSMH Type V 1 NEC/CEC MLEDNA703P5 47.5/46 W 100 W HPS/PSMH Type V 1 NEC/CEC MLEDNA103P5 46.7/46.6 W 100 W HPS/PSMH Type I 1 NEC/CEC MLEDNA103P1 61/62 W 150 W HPS/PSMH Type V 1 NEC/CEC MLEDNA153P5 LIGHTING: ENCLOSED AND GASKETED AREA LED/INDUCTION 74/72 W 175 W PSMH Type V 1 NEC/CEC MLEDNA173P5 70/64 W 175 W PSMH Type I 1 NEC/CEC MLEDNA173P1 95.5/92 W 250 W HPS/PSMH Type V 1 NEC/CEC MLEDNA253P5 Pendant Cone One Hub, Rigid Mounting 35/33 W 70 W HPS/PSMH Type V 3/4 NEC/CEC MLEDND702P5 47.5/46 W 100 W HPS/PSMH Type V 3/4 NEC/CEC MLEDND102P5 46.7/46.6 W 100 W HPS/PSMH Type I 3/4 NEC/CEC MLEDND102P1 61/62 W 150 W HPS/PSMH Type V 3/4 NEC/CEC MLEDND152P5 74/72 W 175 W PSMH Type V 3/4 NEC/CEC MLEDND172P5 70/64 W 175 W PSMH Type I 3/4 NEC/CEC MLEDND172P1 95.5/92 W 250 W HPS/PSMH Type V 3/4 NEC/CEC MLEDND252P5 35/33 W 70 W HPS/PSMH Type V 1 NEC/CEC MLEDND703P5 47.5/46 W 100 W HPS/PSMH Type V 1 NEC/CEC MLEDND103P5 46.7/46.6 W 100 W HPS/PSMH Type I 1 NEC/CEC MLEDND103P1 61/62 W 150 W HPS/PSMH Type V 1 NEC/CEC MLEDND153P5 74/72 W 175 W PSMH Type V 1 NEC/CEC MLEDND173P5 70/64 W 175 W PSMH Type I 1 NEC/CEC MLEDND173P1 95.5/92 W 250 W HPS/PSMH Type V 1 NEC/CEC MLEDND253P5 Suffix Voltage AC Frequency BH NEMA Type I Elliptical. 10
8 LED Wattage /BH Ceiling Five Hubs, Four Close-up Plugs Lamp Wattage Equivalent NEMA Type Hub Size Conformance Catalog Numbers 35/33 W 70 W HPS/PSMH Type V 3/4 NEC/CEC MLEDNC702P5 47.5/46 W 100 W HPS/PSMH Type V 3/4 NEC/CEC MLEDNC102P5 46.7/46.6 W 100 W HPS/PSMH Type I 3/4 NEC/CEC MLEDNC102P1 61/62 W 150 W HPS/PSMH Type V 3/4 NEC/CEC MLEDNC152P5 74/72 W 175 W PSMH Type V 3/4 NEC/CEC MLEDNC172P5 70/64 W 175 W PSMH Type I 3/4 NEC/CEC MLEDNC172P1 95.5/92 W 250 W HPS/PSMH Type V 3/4 NEC/CEC MLEDNC252P5 35/33 W 70 W HPS/PSMH Type V 1 NEC/CEC MLEDNC703P5 47.5/46 W 100 W HPS/PSMH Type V 1 NEC/CEC MLEDNC103P5 46.7/46.6 W 100 W HPS/PSMH Type I 1 NEC/CEC MLEDNC103P1 61/62 W 150 W HPS/PSMH Type V 1 NEC/CEC MLEDNC153P5 74/72 W 175 W PSMH Type V 1 NEC/CEC MLEDNC173P5 70/64 W 175 W PSMH Type I 1 NEC/CEC MLEDNC173P1 95.5/92 W 250 W HPS/PSMH Type V 1 NEC/CEC MLEDNC253P5 Wall Five Hubs, Four Close-Up Plugs 35/33 W 70 W HPS/PSMH Type V 3/4 NEC/CEC MLEDNW702P5 47.5/46 W 100 W HPS/PSMH Type V 3/4 NEC/CEC MLEDNW102P5 46.7/46.6 W 100 W HPS/PSMH Type I 3/4 NEC/CEC MLEDNW102P1 61/62 W 150 W HPS/PSMH Type V 3/4 NEC/CEC MLEDNW152P5 74/72 W 175 W PSMH Type V 3/4 NEC/CEC MLEDNW172P5 70/64 W 175 W PSMH Type I 3/4 NEC/CEC MLEDNW172P1 95.5/92 W 250 W HPS/PSMH Type V 3/4 NEC/CEC MLEDNW252P5 35/33 W 70 W HPS/PSMH Type V 1 NEC/CEC MLEDNW703P5 47.5/46 W 100 W HPS/PSMH Type V 1 NEC/CEC MLEDNW103P5 46.7/46.6 W 100 W HPS/PSMH Type I 1 NEC/CEC MLEDNW103P1 61/62 W 150 W HPS/PSMH Type V 1 NEC/CEC MLEDNW153P5 74/72 W 175 W PSMH Type V 1 NEC/CEC MLEDNW173P5 Lighting LIGHTING: ENCLOSED AND GASKETED AREA LED/INDUCTION 70/64 W 175 W PSMH Type I 1 NEC/CEC MLEDNW173P1 95.5/92 W 250 W HPS/PSMH Type V 1 NEC/CEC MLEDNW253P5 Suffix Voltage AC Frequency BH NEMA Type I Elliptical. 11
9 25 Stanchion One Hub LED Wattage /BH Lamp Wattage Equivalent NEMA Type Hub Size Conformance Catalog Numbers 35/33 W 70 W HPS/PSMH Type V 1-1/4 NEC/CEC MLEDNS704P5 47.5/46 W 100 W HPS/PSMH Type V 1-1/4 NEC/CEC MLEDNS104P5 46.7/46.6 W 100 W HPS/PSMH Type I 1-1/4 NEC/CEC MLEDNS104P1 61/62 W 150 W HPS/PSMH Type V 1-1/4 NEC/CEC MLEDNS154P5 74/72 W 175 W PSMH Type V 1-1/4 NEC/CEC MLEDNS174P5 70/64 W 175 W PSMH Type I 1-1/4 NEC/CEC MLEDNS174P1 95.5/92 W 250 W HPS/PSMH Type V 1-1/4 NEC/CEC MLEDNS254P5 Lighting 35/33 W 70 W HPS/PSMH Type V 1-1/2 NEC/CEC MLEDNS705P5 47.5/46 W 100 W HPS/PSMH Type V 1-1/2 NEC/CEC MLEDNS105P5 46.7/46.6 W 100 W HPS/PSMH Type I 1-1/2 NEC/CEC MLEDNS105P1 61/62 W 150 W HPS/PSMH Type V 1-1/2 NEC/CEC MLEDNS155P5 LIGHTING: ENCLOSED AND GASKETED AREA LED/INDUCTION 90 Stanchion One Hub 74/72 W 175 W PSMH Type V 1-1/2 NEC/CEC MLEDNS175P5 70/64 W 175 W PSMH Type I 1-1/2 NEC/CEC MLEDNS175P1 95.5/92 W 250 W HPS/PSMH Type V 1-1/2 NEC/CEC MLEDNS255P5 35/33 W 70 W HPS/PSMH Type V 1-1/4 NEC/CEC MLEDNR704P5 47.5/46 W 100 W HPS/PSMH Type V 1-1/4 NEC/CEC MLEDNR104P5 46.7/46.6 W 100 W HPS/PSMH Type I 1-1/4 NEC/CEC MLEDNR104P1 61/62 W 150 W HPS/PSMH Type V 1-1/4 NEC/CEC MLEDNR154P5 74/72 W 175 W PSMH Type V 1-1/4 NEC/CEC MLEDNR174P5 70/64 W 175 W PSMH Type I 1-1/4 NEC/CEC MLEDNR174P1 95.5/92 W 250 W HPS/PSMH Type V 1-1/4 NEC/CEC MLEDNR254P5 35/33 W 70 W HPS/PSMH Type V 1-1/2 NEC/CEC MLEDNR705P5 47.5/46 W 100 W HPS/PSMH Type V 1-1/2 NEC/CEC MLEDNR105P5 46.7/46.6 W 100 W HPS/PSMH Type I 1-1/2 NEC/CEC MLEDNR105P1 61/62 W 150 W HPS/PSMH Type V 1-1/2 NEC/CEC MLEDNR155P5 74/72 W 175 W PSMH Type V 1-1/2 NEC/CEC MLEDNR175P5 70/64 W 175 W PSMH Type I 1-1/2 NEC/CEC MLEDNR175P1 95.5/92 W 250 W HPS/PSMH Type V 1-1/2 NEC/CEC MLEDNR255P5 Suffix Voltage AC Frequency BH NEMA Type I Elliptical. 12
10 ATEX/IECEx: Zone 2 and 22 II 2 GD Fixture Unit Electrical Specification LED Wattage /BH Light Level Equivalent NEMA Type Current Draw Catalog Number Fuse Kit Fixture Unit Conformance Voltage Range Voltage Suffix NEC/CEC Certified Ballast Housing 35/33 W 70 W HPS Type V 120 Amps 277 Amps F3 MLEDN70P5 NEC/CEC 35/33 W 70 W HPS Type V 47.5/46 W 100 W HPS Type V 47.5/46 W 100 W HPS Type I 47.5/46 W 100 W HPS Type V 47.5/46 W 100 W HPS Type I 61/62 W 150 W HPS Type V 61/62 W 150 W HPS Type V 74/72 W 175 W PSMH Type V 70/69 W 175 W PSMH Type I 74/72 W 175 W PSMH Type V 70/69 W 175 W PSMH Type I 95.5/92 W 250 W HPS/PSMH Type V 95.5/92 W 250 W HPS/PSMH Type V 347 Amps 480 Amps 120 Amps 277 Amps 120 Amps 277 Amps 347 Amps 480 Amps 347 Amps 480 Amps 120 Amps 277 Amps 347 Amps 480 Amps 120 Amps 277 Amps 120 Amps 277 Amps 347 Amps 480 Amps 120 Amps 277 Amps 120 Amps 277 Amps 347 Amps 480 Amps F3 MLEDN70P5 NEC/CEC F3 MLEDN10P5 NEC/CEC F3 MLEDN10P1 NEC/CEC F3 MLEDN10P5 NEC/CEC F3 MLEDN10P1 NEC/CEC F3 MLEDN15P5 NEC/CEC F3 MLEDN15P5 NEC/CEC F3 MLEDN17P5 NEC/CEC F3 MLEDN17P1 NEC/CEC F3 MLEDN17P5 NEC/CEC F3 MLEDN17P1 NEC/CEC F3 MLEDN25P5 NEC/CEC F3 MLEDN25P5 NEC/CEC Vac, Vac, Vac, Vac, Vac, Vac, Vac, BH BH BH BH BH BH BH Lighting LIGHTING: ENCLOSED AND GASKETED AREA LED/INDUCTION ATEX/IECEx Certified Ballast Housing 35 / 33 W 70 W HPS Type V 120 Amps 277 Amps F3 MLEDNA70P5 ATEX/IECEx 47.5 / 46 W 100 W HPS Type V 120 Amps 277 Amps F3 MLEDNA10P5 ATEX/IECEx 61 / 62 W 150 W HPS Type V 120 Amps 277 Amps F3 MLEDNA15P5 ATEX/IECEx 74 / 72 W 175 W PSMH Type V 120 Amps 277 Amps F3 MLEDNA17P5 ATEX/IECEx Canadian Electrical Code does NOT allow fusing in hazardous locations V. Fuse not CEC rated. For ATEX/IECEx rated fixtures, ballast bodies and mounting hoods must be purchased separately. 13
11 Mounting Hoods Description Hub Size Catalog Number Pendant 3/4 KPA-75 One Hub, Rigid Mounting 1 KPA-100 M20 KPA-M20 Pendant Cone 3/4 KPCH-75 One Hub, Rigid Mounting 1 KPCH-100 Lighting Ceiling Five Hubs, Four Close-Up Plugs M20 KPCH-M20 3/4 KPC-75 1 KPC-100 Wall M20 KPC-M20 3/4 KPWB-75 Five Hubs, Four Close-Up Plugs 1 KPWB-100 LIGHTING: ENCLOSED AND GASKETED AREA LED/INDUCTION 25 Stanchion 90 Stanchion One Hub One Hub M20 KPWB-M20 1-1/4 KPS /2 KPS /4 KPST /2 KPST-150 For ATEX/IECEx rated fixtures, ballast bodies and mounting hoods must be purchased separately. 14
12 Replacement Parts Globes and Gaskets Description Catalog Number Clear Globe VPGL-LED Diffused Globe VPGL-DIFF LED Array Drivers Globe Gasket Silicone Rubber KRF-GK 100 Watt LED Array Assembly, Type 1, White LED's MLEDN10A1W 175 Watt LED Array Assembly, Type 1, White LED's MLEDN17A1W 70 Watt LED Array Assembly, Type 5, White LED's MLEDN70A5W 100 Watt LED Array Assembly, Type 5, White LED's MLEDN10A5W 150 Watt LED Array Assembly, Type 5, White LED's MLEDN15A5W 175 Watt LED Array Assembly, Type 5, White LED's MLEDN17A5W 250 Watt LED Array Assembly, Type 5, White LED's MLEDN25A5W 120/277 V Driver MLEDND 347/480 V Driver MLEDNDBH Lighting LIGHTING: ENCLOSED AND GASKETED AREA LED/INDUCTION 15
13 Dimensions in Millimeters (Inches) mm (6.66") Depending on the length of the conduit stem mm (10.92") mm (5.59") mm (15.40") Dia mm (15.40") Dia. Lighting Pendant Mount Pendant Cone Mount mm (18.63") mm (10.93") LIGHTING: ENCLOSED AND GASKETED AREA LED/INDUCTION mm (15.40") Dia mm (16.93") mm (15.27") mm (9.25") Ceiling Mount mm (7.22") mm (8.54") mm (4.06") Wall Mount mm (18.87") mm (17.22") mm (9.79") mm (15.40") Dia mm (15.40") Dia mm (15.40") Dia. 25 Stanchion Mount 90 Stanchion Mount 16
14 PCD2 Series Factory Sealed Hazardous Location Photocontrol For Use in Locations Maintains Class I, Division 2 rating for Mercmaster III, Mercmaster III Low Profile, Mercmaster III and 400 Series Luminaires; Mercmaster LED Series. NEMA 4X Applications Encapsulated photocontrol provides automatic dusk-to-dawn lighting control in Class I, Division 2 locations. Typical applications include walkways, security areas and any other outdoor lighting application. For use with Mercmaster III, Mercmaster III Low Profile, Mercmaster III and 400 Series Luminaires; Mercmaster LED Series. For remote mounting in FS Boxes. Features Factory sealed design eliminates the need for an explosionproof enclosure. Can be easily installed in the field. Solid state design for performance and reliability. Available for 120, 208, 240, or 277 volts W HID, incandescent, fluorescent and LED, VA Voltage/Ampere Minimum time delay: 15 seconds to eliminate nuisance tripping. Factory-Installed Photocontrol Add to fixture catalog after voltage; i.e.: KPWBL1075MTH1. Mercmaster III wall mounting hood with photocontrol installed shown Voltage Range Suffix Designation 120 V, H1 208 V, H2 240 V, H3 277 V, H4 Photocontrol in FS Cover for Use with FS/FD Box Supplied with two stainless steel screws. For neoprene gasket, order catalog number FS-GKR-1N. Voltage Range Catalog Number 120V, FSKA-PC120D V, FSKA-PC247D2 Provided with (3) 18AWG stranded leads mm (6 ) in length. Will fit through standard 1/2 knockout. Materials Encapsulated with epoxy sealing compound FS: aluminium Certifications and Compliances UL Standard: 1604 Hazardous (Classified) Locations culus Recognized Dimensions 65.0 mm (2.56 ) 28.7 mm (1.13 ) 34.9 mm (1.375 ) Lighting LIGHTING: ENCLOSED AND GASKETED AREA LED/INDUCTION Photocontrol for Field Installation Voltage Range Max. Current Catalog Number 120 V, 8.3 Amp PC120D V, 3.5 Amp PC247D mm (0.69 ) 30.2 mm (1.19 ) 49.2 mm (1.94 ) Fixtures with photocontrols are not rated. 17
15 Photometric Data DATA SHOWN IS ABSOLUTE Lighting REPORT NUMBER: MLEDN70P5 Lamps: Mercmaster LED, Class I, Division 2, Polycarbonate Optic Candela Distribution Zonal Lumen Summary Flux Zone Lumens % Fixture CIE Type - Direct Plane Spacing Criteria Deg 90-Deg LIGHTING: ENCLOSED AND GASKETED AREA LED/INDUCTION REPORT NUMBER: MLEDN10P5 Lamps: Mercmaster LED, Class I, Division 2, Polycarbonate Optic Candela Distribution Zonal Lumen Summary Flux Zone Lumens % Fixture CIE Type - Direct Plane Spacing Criteria Deg 90-Deg
16 Photometric Data DATA SHOWN IS ABSOLUTE REPORT NUMBER: MLEDN10P1 (NEMA Type I) Lamps: Mercmaster LED, Class I, Division 2, Polycarbonate Optic Candela Distribution CIE Type - Direct Zonal Lumen Summary Zone Lumen Plane Spacing Criteria Zone Lumens % Fixture Deg 90-Deg REPORT NUMBER: MLEDN15P5 Lamps: Mercmaster LED, Class I, Division 2, Polycarbonate Optic Candela Distribution Zonal Lumen Summary Flux Zone Lumens % Fixture CIE Type - Direct Plane Spacing Criteria Deg 90-Deg Lighting LIGHTING: ENCLOSED AND GASKETED AREA LED/INDUCTION
17 Photometric Data DATA SHOWN IS ABSOLUTE Lighting REPORT NUMBER: MLEDN17P5 Lamps: Mercmaster LED, Class I, Division 2, Polycarbonate Optic Candela Distribution Zonal Lumen Summary Flux Zone Lumens % Fixture CIE Type - Direct Plane Spacing Criteria Deg 90-Deg LIGHTING: ENCLOSED AND GASKETED AREA LED/INDUCTION REPORT NUMBER: MLEDN17P1 (NEMA Type I) Lamps: Mercmaster LED, Class I, Division 2, Polycarbonate Optic Candela Distribution CIE Type - Direct Zonal Lumen Summary Zone Lumen Plane Spacing Criteria Zone Lumens % Fixture Deg 90-Deg
18 Photometric Data DATA SHOWN IS ABSOLUTE REPORT NUMBER: MLEDN250P5 Lamps: Mercmaster LED, Class I, Division 2, Polycarbonate Optic Candela Distribution Zonal Lumen Summary Flux Zone Lumens % Fixture CIE Type - Direct Plane Spacing Criteria Deg 90-Deg Lighting LIGHTING: ENCLOSED AND GASKETED AREA LED/INDUCTION 21
Mercmaster LED Series Luminaires Enclosed and Gasketed Fixtures
Mercmaster Series Luminaires LIGHTING: ENCLOSED AND GASKETED AREA /INDUCTION Applications Enclosed and gasketed fixtures suitable for use in: Marine and wet locations A wide range of industrial, chemical
Industrial Mercmaster LED Low Profile Luminaires For Ordinary Locations
Type R, 4, 4X Marine Outside Type (Salt Water) For USA ONLY Applications Ordinary location fixtures suitable for use in: Heavy industrial locations where severe weather conditions, excessive moisture,
Applications. Straight Stanchion-Mount Fixture with Prismatic Glass Refractor and Guard. Pendant Mount Fixture with Prismatic Glass Refractor
Mercmaster III HID 50-250 Watt Luminaires Applications Enclosed and gasketed fixtures suitable for use in: Marine and wet locations A wide range of industrial, chemical processing and other areas where
Alphanumeric Index ALPHANUMERIC INDEX. xxviii
Alphanumeric Index ALPHANUMERIC INDEX Catalog Number Page VGL-1GR 609 VGL-1GR 614 VGL-1HR 609 VGL-1HR 614 VGL-1OP 609 VGL-1OP 614 VGL-1RE 609 VGL-1RE 614 VGL-2AM 609 VGL-2BL 609 VGL-2CL 609 VGL-2GR 609
Areamaster LED Flood/High Bay Luminaires For Hazardous Locations. 250 W, 400 W, 750 W, 1000 W HID Light Level Equivalent
Class I, Division 2, Groups A, B, C, D Class I, Zone 2 Group IIC Class II, Division 1, Groups E, F, G Class II Division 2, Groups F, G Class III Simultaneous Exposure Type 3R, 4, 4X IP66/67 Applications
Applications. Standard Materials
Code Master Jr. HID Factory Sealed Luminaires Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 50 W, 70 W, 00 W, 75 W PSMH. 75 W MH V. Medium Base. For Use with Threaded Metal Conduit. Class I, Division
Areamaster 1000 Floodlights Integrally Ballasted W HID For hazardous locations.
A, IIB, IIC Applications Powerful, efficient weatherproof lighting for large areas such as: Pulp and paper mills Processing plants Chemical plants Oil refineries Foundries Storage areas Waste and sewage
Areamaster LED Flood/High Bay Luminaires
Applications Typical applications include: Pulp and paper mills Processing plants Chemical plants Oil refineries Foundries Storage areas Waste and sewage treatment Parking garages Other areas where dust,
F1-1. HID Lighting: Enclosed and Gasketed. Description. 2, 3 Mercmaster III Family Tree Mercmaster III HID Low Profile Lighting Fixtures
HID Lighting: Enclosed and Gasketed 1-1 Page Description 2, 3 Mercmaster III amily Tree 2-22 Mercmaster III HID Low Profile Lighting ixtures 23-54 Mercmaster III HID 50-250W Lighting ixtures Mercmaster
CEC: Class I, Division 1 and 2, Groups B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Type 4X Exd IIB + H 2
Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 75 W PSMH. 75 W MH. Medium Base. For Use with Threaded Metal Conduit. Applications For use in chemical and petrochemical plants, such as manufacturers
Applications. Standard Materials. Certifications and Compliances
Code Master 2 HID Factory Sealed Luminaires Class I, Division 1 and 2, Groups C, D Class I, Division 1 and 2, Groups B, C, D Applications Ideal for use in chemical and petrochemical plants, such as manufacturers
INSTRUCTION SHEET. Installation Instructions for Mercmaster LED Luminaire. Applications. Agency Ratings. Product Safety
650457-000 INSTRUCTION SHEET Installation Instructions for Mercmaster Luminaire for proper and safe installation of this product, please read the following instructions. Applications Marine and wet locations;
Installation Instructions for Appleton Mercmaster LED Luminaire
650559-000 INSTRUCTION SHEET Installation Instructions for Appleton Mercmaster LED Luminaire FOR PROPER AND SAFE INSTALLATION OF THIS PRODUCT, PLEASE READ THE FOLLOWING INSTRUCTIONS. Product Safety Signal
Applications. Standard Materials. Certifications and Compliances
Code Master 2 HID Factory Sealed Luminaires NEC: Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Marine Type Electric Fixtures Outside Type (Salt Water) Class I, Division
Lighting: Explosionproof Area HID. Applications. Standard Materials
Code Master Jr. HID Factory Sealed Luminaires Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 50 W, 70 W, 00 W, 75 W PSMH. 75 W MH V. Medium Base. For Use with Threaded Metal Conduit. Class I, Division
HID/AREA: NEC/CEC EXPLOSIONPROOF. Applications. NEC/CEC Certifications and Compliances
Integrally Ballasted. 50 W, 70 W, 100 W, 150 W, 250 W, 400 W HPS; 175 W, 250 W, 320 W, 350 W, 400 W PSMH; 175 W, 250 W, 400 W MH. Applications Ideal for use in chemical and petrochemical plants, such as
Applications. Illustrated Features
Applications For use in locations where a high degree of corrosion resistance is required. FR Series: For use in areas where high humidity or water vapor are present Typical uses include meat- or food-processing
Mercmaster II HID Luminaires High Pressure Sodium and Pulse Start Metal Halide. Mogul Base UNILETS for Use with Threaded Metal Conduit.
UNILETS for Use with Threaded Metal Conduit. Applications Enclosed and gasketed HID lighting fixtures for use in tunnels, walkways, bridges, storage facilities, processing plants, parking lots, foundries,
N2LED Series Emergency Luminaires Non-Metallic Emergency Egress Lighting Systems with Remote or Direct Mounted Lamps.
Applications Enclosed and gasketed, non-metallic emergency lighting system suitable for use in areas where flammable gases or vapors may become present due to abnormal, unusual or accidental conditions
Code Master Incandescent Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof For use with threaded metal conduit.
Applications For use in hazardous locations such as plants where plastics, paints, thinners and petrochemicals are manufactured. For use in chemical and petrochemical plants, such as manufacturers of plastics,
Code Master 2 Factory Sealed Induction Lighting System Explosionproof
Lighting Induction Code Master 2 Factory Sealed Induction Lighting System NEC/CEC: Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Marine Type Electric Fixtures Outside
Code Master 2 Factory Sealed Induction Lighting System Explosionproof
Code Master 2 Factory Sealed Induction Lighting System Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Marine Type Electric Fixtures Outside Type (Salt Water) NEMA 4X
FOR PROPER AND SAFE INSTALLATION OF THIS PRODUCT, PLEASE READ THE FOLLOWING INSTRUCTIONS.
Installation Instructions for Mercmaster LED Low Profile Luminaire Fittings 650499-000 INSTRUCTION SHEET FOR PROPER AND SAFE INSTALLATION OF THIS PRODUCT, PLEASE READ THE FOLLOWING INSTRUCTIONS. Product
FV Series Nonmetallic Fluorescent Luminaires For Hazardous and Adverse Locations
Applications For use in hazardous locations defined by the NEC and CEC as Class I, Division 2, Groups A, B, C and D; Class II, Division 2, Groups F and G; Marine Outdoor Salt Water; UL1598A and. As well
CEC: Class I, Division 1 and 2, Groups B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Type 4X Exd IIB + H 2 3/4 CAP-75 1 CAP-100
Code Master Jr. HID Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof Integrally Ballasted. 50 W, 70 W, 100 W, 150 W HPS; 50 W, 70 W, 100 W, 175 W PSMH. 175 W MH. Medium Base. For Use with Threaded
Industrial Areamaster LED Flood/High Bay Luminaires For Ordinary Locations. 250 W, 400 W, 750 W HID Light Level Equivalent
NEC/CEC: Type 3R, 4X IP66, IP67 Suitable for use in Wet Locations Marine Outside Type (Salt Water) Applications Powerful, efficient weatherproof lighting for applications such as: Security lighting Production
SAFR LED SERIES S A F R L E D. Hazardous Location LED Luminaire
SAFR LED SERIES Hazardous Location LED Luminaire Class I, Division 2, Groups A, B, C & D Class II, Division & 2, Groups E, F & G Class III Class I, Zone 2, Groups IIA, IIB & IIC UL 8750 LED Safety UL 844
N2MV Series W Non-metallic
N2MV Series 50-175W Non-metallic Cl. I, Div. 2, Groups A, B, C, D Cl. II, Groups F, G Cl. III & Simultaneous Presence (100W max) Marine & Wet Locations, R, 4, 4X; IP56 L Applications: N2MV series Champ
HID/FLOODLIGHT: NEC/CEC EXPLOSIONPROOF. Applications. Options
Applications UL Listed for Outside Type (Salt Water). Ideal in Class I, Division 1 and 2 installations in refineries, in pipeline transportation facilities, at drilling rigs and in production facilities
ATX PC Series Floodlights Flameproof. Metal Halide, High Pressure Sodium, Mercury Vapor, Halogen
Applications Designed for large area lighting in industrial outdoor and indoor hazardous areas. Ideal for use in Zones 1 and 2 and 21 and 22 in the oil and gas industry. In locations such as: refineries,
SAFR LED S A F R L E D. LED Area Lighting for Hazardous Locations
LED Class I, Division 2, Groups A, B, C & D Class II, Division & 2, Groups E, F & G Class III Class I, Zone 2, Groups IIA, IIB & IIC UL 8750 LED Safety UL 844 Hazardous Locations UL 598 Wet Locations UL
LIGHTING: EXPLOSIONPROOF FLOODLIGHT. Applications. Options
Code Master 2 HID Factory Sealed Floodlights NEC: Class 1, Division 1 and 2, Groups C, D Marine Type Electric Fixtures Outside Type (Salt Water) CEC: V Class I, Division 1 and 2, Groups B, C, D Class II,
SAFJ LED SERIES S A L E D. Hazardous Location Compact LED
SAFJ LED SERIES Hazardous Location Compact LED Class I, Division 2, Groups A, B, C, & D Class II, Division 1 & 2, Groups E & F Class III Simultaneous Presence Enclosed & Gasketed Wet Locations NEMA 3R,
SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent
SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent S A F Class I, Division 2, Groups A, B, C & D Class II, Division 1 & 2, Groups E, F & G Class III Zone 2, Groups IIA, IIB & IIC UL 844
ATX FN Series Heavy Duty Nonmetallic Fluorescent Luminaires Standard and Emergency Back-Up. Zone 2-21 and 22
Applications Can be installed in hazardous areas designated as Zone 2, 21 and 22. For use in locations where a high degree of corrosion resistance is required. For indoor/outdoor use where protection against
SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent
SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent S A F Class I, Division 2, Groups A, B, C & D Class II, Division 1 & 2, Groups E, F & G Class III Zone 2, Groups IIA, IIB & IIC UL 844
Making the Move From HID to LED Painless, Easy and Cost Effective.
Making the Move From HID to LED Painless, Easy and Cost Effective. Appleton Mercmaster LED Low Profile Luminaires Technology and Application Guide. Maximize Operating Expense Budgets and Reduce Maintenance
SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent
SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent S A F Class I, Division 2, Groups A, B, C & D Class II, Division 1 & 2, Groups E, F & G Class III Zone 2, Groups IIA, IIB & IIC UL 844
SXPJ SERIES S X. HID & Compact Fluorescent Lighting for Hazardous and Hostile Locations
SXPJ SERIES HID & Compact Fluorescent Lighting for Hazardous and Hostile Locations S X PJ Class I, Division 1, Group C & D Class II, Division 1, Groups E, F & G Class III Zone 1, Groups IIA & IIB Factory
LOW PROFILE LINEAR ALUMINUM LED EXCLUSIVE DESIGN FEATURES
L KILLARK TI IGH NG HA Z LO C LOW PROFILE LINEAR ALUMINUM LED EXCLUSIVE DESIGN FEATURES High temperature rated silicone gasketing provides Type 4X & IP66 sealing. Diffused Clear 2 Lens Choices: Clear for
Pauluhn ZPL explosionproof LED luminaires For drilling and marine applications
Pauluhn ZPL explosionproof linear LEDs are designed to replace fluorescent T12, T8 and T5HO lighting on marine vessels and land-based and offshore drilling platforms. The rugged and durable design features
LOW PROFILE LINEAR ALUMINUM LED EXCLUSIVE DESIGN FEATURES
KILLARK Z A H LO C LOW PROFILE LINEAR ALUMINUM LED EXCLUSIVE DESIGN FEATURES High temperature rated silicone gasketing provides NEMA 4X & IP66 sealing. Diffused 2 Lens Choices: Clear for maximum lumens
Fluorescent Lighting: Enclosed and Gasketed
luorescent Lighting: Enclosed and Gasketed 3-1 Page Description 2-5 V Series 2-3 eatures, Ordering Information and Accessories 4-5 Technical Data, Dimensions and Photometric Data 6-11 VRS and DRS luorescent
Fluorescent Lighting FE Series: Nonmetallic Fluorescent Lighting Fixtures, Standard and Emergency Battery Back-Up Increased Safety
Fluorescent Lighting FE Series: Nonmetallic Fluorescent Lighting Fixtures, Standard and Emergency Battery Back-Up Increased Safety Zone & & II GD IP66/67 IK0 Applications: Can be installed in hazardous
Hazardous Area LED Lighting Champ FMV LED Luminaires. Champ FMV. LED floodlights for harsh and hazardous areas
Hazardous Area LED Lighting Champ FMV LED Luminaires Champ FMV LED floodlights for harsh and hazardous areas Champ FMV LED floodlights Safe. Reliable. Efficient. Featuring the industry's broadest range
Lighting: Incandescent & HID Lighting PB, PC & PL Series: Floodlights Flameproof
Ex de IIB Type PB Ex de IIC Type PC Ex de IIB Type PL Low Temperature Rating Compliances: ATEX - IEC: Zone 1 & 2 21 & 22 ATEX IECEx CE Ex de IIB (PB and PL) T4 to T1 Ex td A21 T130 C to T378 C IP66 (Type
Champ MLL LED luminaires
The Champ MLL linear LED is specifically designed to replace fluorescent T12, T8 and T5HO lighting in harsh and hazardous applications. The rugged and durable design features the industry s most versatile
COMPACT FLUORESCENT EMERGENCY FIXTURES
KILLARK H A Z LO C COMPACT FLUORESCENT EMERGENCY FIXTURES VE3Q/VE4Q Class I, Div. 2, Groups A,B,C,D Class l, Zone 2, Groups IIC, llb, lla Class II, Div. 1 & 2, Groups E,F,G Class III NEMA 3, 4, 4X IP66
Lighting: Fluorescent Lighting FL Series: Light Duty Nonmetallic Fluorescent Lighting Fixtures, Standard and Emergency Battery Back-Up Zone 2 & 22
FL Series: Light Duty Nonmetallic Fluorescent Lighting Fixtures, Standard and Emergency Battery Back-Up 2 x 58 W 2 x18 W Compliance Data: ATEX IEC: Zone 2 22 ATEX IEC CE Ex nr II or na II T6 or T5 or T4
ATX DPD Series Distribution Panelboards Flameproof
ATX DPD Series Distribution Panelboards Applications Protection and control of electrical equipment in hazardous areas where ignitable vapors, gases or highly combustible dusts are present. For installation
Lighting: Fluorescent Lighting RE Series: Recessed Fluorescent Lighting Fixtures, Standard and Emergency Back-Up Increased Safety
4 x 18 W Surface Mounting 2 x 36 W Recessed Compliance Data: ATEX IECEx: ATEX IECEx CE Ex de IIC or Ex demb IIC (emergency version) T6 to T4 Ex td A21 T 75 C Technical Data: 18 W 36 W 58 W 1, 2, 3 & 4
www.greenelectricalsupply.com Page 1 of 4 The HLR SERIES hazardous location family of fixtures is suitable for use in a wide range of indoor and outdoor Class I Division 2 applications. Available in eight
G1-1. HID Lighting Fixtures: Explosionproof, Dust-Ignitionproof. Page Description
HID Lighting Fixtures: Explosionproof, Dust-Ignitionproof 1-1 Code Master 2 with Polyester Reflector Code Master Jr. without Reflector Code Master 2 Floodlight A-51 roup A & B with Porcelain Reflector
ATX FE Series Nonmetallic Fluorescent Luminaires Standard and Emergency Battery Back-Up. Increased Safety
Applications Can be installed in hazardous areas designated as Zone 1 and 2 21 and 22. For use in locations where a high degree of corrosion resistance is required. For indoor/outdoor use where protection
Areamaster 100 Wide-Beam Floodlights 70 W, 100 W, 150 W HPS; 70 W, 100 W, 150 PSMH For general, marine and hazardous locations.
Areamaster 100 Wide-Beam Floodlights NEC CEC V Class II, Divisions I and 2, Groups E, F, G V Class III Applications Highly efficient, all-weather flood-lighting for lower wattage service. Well suited for:
KH Series Kemlux III Enclosed/Gasketed
For use in corrosive, harsh, hazardous applications such as chemical, petrochem, marine, power generation, pharmaceutical, or food processing plants Mogul base socket on tanks C, D & E Medium base socket
WFHN LED SERIES W F H N L E D. High-Bay Lighting for Heavy Hose-Down Environments
WFHN LED SERIES High-Bay Lighting for Heavy Hose-Down Environments UL 1589 Wet Locations UL 8750 LED Safety NEMA 4X CUL Listed NSF Certified Food Equipment High Pressure Hose-Down One Piece Welded Aluminum
Standard Finishes Receptacles: epoxy powder coat Cord connector housings and caps: epoxy powder coat
U-Line Factory Sealed 15 and 20 Amp Plugs and Receptacles V Applications Locations where receptacles are used with stationary or portable electrically operated devices such as: Lighting systems Conveyors
APPLICATIONS APPROVALS. GASKET One piece neoprene. LATCHES Plated steel twist draw. ENTRIES 1 2 NPT feed-through outlets, 3 4 NPT outlets optional.
Haz HazMax Pinnacle/al APPLICATIONS Hazardous locations Watertight requirements Dusttight requirements Oil and gas exploration and production Waste water treatment plants Pipeline compressor / pumping
Class 1 Division 2 - Class 2 Division 1&2 - Explosion Proof Low Profile LED Light Fixture
Class 1 Division 2 - Class 2 Division 1&2 - Explosion Proof Low Profile LED Light Fixture Part #: HBLP-15-LP-MLED The Larson Electronics HBLP-15-LP-MLED low profile high bay light fixture provides operators
MHD2/MHDO SERIES MHD2. Marine Heavy Duty Outdoor Non-Metallic Fluorescent CLASS 1 DIVISION 2 FLUORESCENT LIGHT
MHD2/MHDO SERIES Marine Heavy Duty Outdoor Non-Metallic Fluorescent Non-metallic, glass reinforced polyester housing. 3/4 in. NPT aluminum hub. Captive stainless steel latches. Stainless steel mounting
FL Series Light Duty Nonmetallic Fluorescent Luminaires Standard and Emergency Back-Up. Zone 2 and 22
Standard and Emergency Back-Up. Applications Light duty luminaire ideal for commercial and light industrial locations including hazardous areas designated as Zone 2 or 22 environments. Typical applications
LEN Series 2x2 / 2x4 LED
FEATURES & SPECIFICATIONS Intended Use The LEN offers the look and feel of a fluorescent luminaire - subtle soft direct elements, interest and depth across the ceiling plane - with a contemporary look
WFH LED SERIES L E D. High-Bay Lighting for Hazardous & Wet Locations
WFH LED SERIES W FH High-Bay Lighting for Hazardous & Wet Locations Class I, Division 2, Groups A, B, C, & D Class II, Division 2, Groups F & G Class III UL 844 Hazardous Locations UL 1598 Wet Locations
MHDS SERIES M H D S. Stainless Steel Marine Heavy Duty Luminaire for Hazardous Locations
MHDS SERIES Stainless Steel Marine Heavy Duty Luminaire for Hazardous Locations Class I, Division 2, Groups A, B, C & D Class II, Division 2, Groups F & G Class III UL 844 Hazardous Locations UL 198A Marine
MHD2/MHDO SERIES M H D 2. Marine Heavy Duty Non-Metallic Fluorescent
MHD2/MHDO SERIES Marine Heavy Duty Non-Metallic Fluorescent Class I, Division 2, Groups A, B, C & D Class II, Division 2, Groups F & G Class III Zone 2, Groups IIA, IIB & IIC UL 844 Hazardous Locations
4L EVM Hazard Gard H.I.D. Luminaires Mogul Base Factory Sealed (Groups C.D)
4L EVM Hazard Gard H.I.D. Luminaires Mogul Base Factory Sealed (Groups C.D) Cl. I, Div. 1 Groups B (GB suffix),c,d (with suffix GB), IIB IIA Paint Spray (100W max) Application: Hazard Gard luminaires are
DESCRIPTION & APPLICATION
T5 FME T5 4L - Full Body High Bay DESCRIPTION & APPLICATION The Envirobrite FME T5 fixture is a full body fluorescent high bay ideal for replacing energy devouring HID fixtures. This all aluminum enclosed
SXPJ SERIES S X azz.com/rigalite
SXPJ SERIES HID Lighting & Compact for Explosion Fluorescent Proof, Lighting Hazardous for and Hazardous Hostile Locations and Hostile Locations S X PJ Class I, Division 1, Group C & D Class II, Division
MAR SERIES Fluorescent Lighting for Hazardous Locations
MAR SERIES M AR Fluorescent Lighting for Hazardous Locations Class I, Division 2, Groups A, B, C, & D Seismic Tested UL 844 Hazardous Locations UL 924 Emergency Lighting UL 1598A Marine Outside Type CSA
LED lighting for drilling & marine Pauluhn ZPL LED luminaires. Pauluhn ZPL. LED luminaires for drilling & marine applications
LED lighting for drilling & marine Pauluhn ZPL LED luminaires Pauluhn ZPL LED luminaires for drilling & marine applications Pauluhn ZPL explosionproof LEDs Safe. Reliable. Efficient. Featuring the industry's
Heavy industrial LED lighting Champ Pro PFM LED luminaires. Champ PFM. LED floodlights for heavy industrial areas. Authorized Distributor
Heavy industrial LED lighting Champ Pro PFM LED luminaires Champ PFM LED floodlights for heavy industrial areas Authorized Distributor Champ Pro PFM LED floodlights Safe. Reliable. Efficient. Featuring
Plugs and Receptacles: Hazardous Location
U-Line Factory Sealed 15 and 20 Amp Plugs and Receptacles V Plugs and Receptacles Plugs and Receptacles: Hazardous Location Applications Locations where receptacles are used with stationary or portable
Rig-A-Lite LED Luminaire Guide. Superior LED Technology for Hazardous and Severe Environments. Five-Year Warranty
Rig-A-Lite LED Luminaire Guide Superior LED Technology for Hazardous and Severe Environments Five-Year Warranty Rig-A-Lite LED Luminaires The Rig-A-Lite LED luminaires are the perfect combination of dependability,
FE Series Nonmetallic Fluorescent Luminaires Standard and Emergency Battery Back-Up. Increased Safety
: : Applications Can be installed in hazardous areas designated as Zone 1, 2, 21 and 22. For use in locations where a high degree of corrosion resistance is required. For indoor/outdoor use where protection
DMV Series W For Combustible Dusts
L DMV Series 50-250W For Combustible Dusts Champ H.I.D. Luminaires Cl. I, Div. 2, Groups A, B, C, D Restricted Breathing Cl. I, Div. 2 & Zone 2 (Suffix S826) Certified for IEC Zone 2 (Suffix S826TB) Cl.
Wellglass fittings EVH, EVX Wellglass fitting all zones - zones 1, 2, 21 & 22
WELLGLASS - EVH, EVX WELLGLASS FITTING - S 1, 2, 21 & 22 127 Wellglass fittings Features Compact design for easy installation For diffuse or ambient light Compatible with energy saving lamps or discharge
HID/AREA: NEC/CEC ENCLOSED AND GASKETED. Applications
High Pressure Sodium, Pulse Start Metal Halide and Metal Halide Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Applications Enclosed and gasketed fixtures suitable
www.greenelectricalsupply.com LED Technical Data High efficiency s. Use anywhere you need exceptional light distribution for mounting heights up to 40 feet. LIMITLESS OPTIONS for the following applications:
AUTHENTIC LIFE SAFETY PRODUCTS SINCE 1940
AUTHENTIC LIFE SAFETY PRODUCTS SINCE 1940 NEMA 4X C1D2/C2D1 INDUSTRIAL HIGH LUMEN LED EMERGENCY LIGHT DUAL-LITE.COM INNOVATIVE LED NEMA 4X C1D2/C2D1 Industrial Emergency Light The Dynamo Series offers
WELLGLASS EV.. Series - H.I.D. well glass lighting fixture. Aluminium with low content of copper. O-ring made of Nitrile Rubber (NBR)
WELLGLASS EV.. Series - H.I.D. well glass lighting fixture EV.. series well glass lighting fixtures are suitable for hazardous areas of industrial plants for lighting of indoor and outdoor structures,
MagnaPro Hazardous Area Drop Lens Fluorescent
CSA - Class I Div. 2 - Groups A, B, C, & D CSA - Class I Zone 2 - Groups IIA, IIB & IIC CSA - Class II Div. 2 - Groups F & G CSA - Type 3 UL 844 - Class I Div. 2 - Groups A, B, C, & D UL - Outdoor Marine
Haz. HazMax Summit/ss TECHNICAL SPECIFICATIONS
Haz HazMax Summit/ss APPLICATIONS High, mid & low bay Petrochemical facilities Hazardous locations Munitions manufacturing and storage Watertight requirements Waste water treatment plants Dusttight requirements
AFL FLOODLIGHT SERIES
AFL FLOODLIGHT SERIES A FL Flood Lighting for Hazardous Locations Class I, Division 2, Groups A, B, C & D UL 844 Hazardous Locations UL 598A Marine Outside Type Zone 2, Groups IIA, IIB & IIC CUL Cast Aluminum
Power (W) Tamb 40 o C LX1GAM4LB57 5,700 10, T3 T100 o C T4 T85 o C 13
Gamma Floodlight IP66/67 The Gamma is a high output LED floodlight is designed for use in Zone 1 & 21 hazardous areas. The compact design and flexible mounting allows the Gamma to also be used as a lowbay.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE IMPORTANT SAFEGUARDS READ AND FOLLOW ALL SAFETY INSTRUCTIONS
Champ Fluorescent Luminaires DMVFB Auxiliary Series - 52, 64, & 84 Watt Installation & Maintenance Information SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE IF 1713 IMPORTANT SAFEGUARDS READ AND FOLLOW
Form 85 Unilets Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit.
For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit. NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing.
U-Line Contender Factory Sealed 20 Amp Plugs and Receptacles Explosionproof, Dust-Ignitionproof
U-Line Contender Factory Sealed 20 Amp Plugs and Receptacles Explosionproof, Dust-Ignitionproof Class I, Groups C, D Class I, Division 2, Group B Class I, Zone 1, Group IIB Class I, Zone 2, Group IIB +
INCANDESCENT/COMPACT FLUORESCENT/MEDIUM BASE HID
KILLARK INCANDESCENT/COMPACT FLUORESCENT/MEDIUM BASE HID Class I, Div. 1 & 2, Groups C,D Class I, Zones 1 & 2, Groups llb, lla Class II, Div. 1 & 2, Groups E,F,G Class III, Div. 1 & 2 Suitable for wet
SURFACE/CEILING & SUSPENDED MOUNT INSTALLATION
SURFE/CEILING & SUSPENDED MOUNT INSTALLATION E477827 E477827 APPLICATION NL luminaires are designed for use indoors, outdoors, wet locations, areas containing moisture, dirt, corrosion, vibration and rough
DuraPro Hazardous Area Fluorescent
CSA - Class I Div. 2 - Groups A, B, C, & D CSA - Class I Zone 2 - Groups IIA, IIB & IIC CSA - Class II Div. 2 - Groups F & G CSA - Type 3 UL 844 - Class I Div. 2 - Groups A, B, C, & D UL - Outdoor Marine
Haz. HazMax Intrepid/nm TECHNICAL SPECIFICATIONS
Haz HazMax Intrepid/nm APPLICATIONS Hazardous locations Marine and watertight requirements Dusttight requirements Oil and gas exploration and production Petrochemical facilities APPROVALS Class I Division
220/230/240V Watt High Pressure Sodium - Hazardous Location Lighting - C1D2 - Pole Mount
220/230/240V Watt High Pressure Sodium - Hazardous Location Lighting - C1D2 - Pole Mount Part #: HAL-PRM-250W-HPS-220V-PT Page: 1 Made in the USA The efficient HAL-PRM-250W-HPS-220V-PT high pressure sodium
LED FLOOD LIGHT SOLUTIONS Harsh and Hazardous Products
LED FLOOD LIGHT SOLUTIONS Harsh and Hazardous Products www.hubbell-killark.com Ex- LED Lighting and Control Switches KILLARK LED FLOOD LIGHTS H A Z LO C INDEX PRODUCT PAGE NO. NEMA 4 (or 4X or IP66) Class
C1D1 Explosion Proof 25 Watt High Bay LED Light Fixture - Paint Spray Booth Approved - 2,167 Lumens
C1D1 Explosion Proof 25 Watt High Bay LED Light Fixture - Paint Spray Booth Approved - 2,167 Lumens Part #: EPL-HB-25LED-RT Page: 1 The Larson Electronics EPL-HB-25LED-RT Explosion Proof High Bay light
TCPHB4UNI1250K10 4' 12, 000 Lumen Unv Volt Led High Bay 5000K
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 TCPHB4UNI1250K10 4' 12, 000 Lumen Unv Volt Led High Bay 5000K Technical Consumer Prod. Catalog Number Manufacturer Description
HKH Series. HAZCON Controls for Harsh and Hazardous Environments
HKH Series HAZCON Controls for Harsh and Hazardous Environments Z A H LO C NON-METALLIC DIN RAIL MOUNT Component Mounting Rail Optional Customer I.D. Nameplate Optional Legend Plate Explosion Protective
EWE. Ex de. Cooling fins
EWE Cooling fins - Suitable for installation with ambient temperature from -50 C to +60 C - Suitable for discharge lamps of up to 150W - Suitable for loop-in/loop-out connections - Zones 1, 2, 21, 22 4
Weather Protective Devices
Weather Protective Devices N Industrial Specification Grade Receptacle Covers N-1, N-2 Weather Protective Devices N-3 Power-Lock Receptacles and Flanged Inlets with Weather Protective Lift Lids N-4 50
CONTROLS: NEC/CEC EXPLOSIONPROOF CONTROL STATIONS AND SWITCHES. Applications. Illustrated Features
Explosionproof, Dust-Ignitionproof Malleable Iron Body and Cover. Furnished with Internal Ground. Applications Designed to prevent arcing of enclosed switches in ignitable atmospheres during connect and