N2MV Series W Non-metallic
|
|
|
- Victor Sherman
- 6 years ago
- Views:
Transcription
1 N2MV Series W Non-metallic Cl. I, Div. 2, Groups A, B, C, D Cl. II, Groups F, G Cl. III & Simultaneous Presence (100W max) Marine & Wet Locations, R, 4, 4X; IP56 L Applications: N2MV series Champ luminaires are used: In areas in which ignitable concentrations of flammable gases or vapors will be present due to abnormal, unusual or accidental conditions. In installations where moisture, dirt, vibration, corrosion or rough usage are concerns. Wherever the damaging effects of water, wind, snow, sleet, hot sun or any combination of these elements are found. Ideal for marine use; resists the harmful effects of salt water. Withstands the harshest of corrosive environments. To provide low wattage spot and floodlighting. For general area lighting. In areas where the ambient temperature will get as low as 40 C ( 40 F). In manufacturing plants, refineries, chemical, petrochemical and other industrial process facilities, wastewater and sewage treatment facilities, offshore, dockside and harbor installations as well as other heavy industrial applications. Features: Housing and mounting modules made of polyphenylene sulfide (PPS) for strength and maximum resistance to corrosion. Pendant mounting module equipped with integral hub set screws for vibration resistance. Hubs are provided with an integral bushing to help prevent damage to field wiring during installation and ground connection for positive bonding. Guard, hub inserts, stanchion elbow and hardware made of stainless steel for maximum resistance to corrosion. Grounding wire for safety. Stainless steel open bottom guard permits direct access to the globe for easy relamping. Hinged assembly allows the luminaire to hang free during installation to permit the use of both hands when wiring. One external captive screw for ease of installation. Handle hinge assembly doubles as a handle for ease of installation, especially when carrying up a ladder. Certifications and Compliances: NEC and CEC: Class I, Division 2, Groups A, B, C, D 100W Maximum Class II, Class III & Simultaneous Presence (Class I, Division 2 and Class II) UL Standards: 844 Hazardous (Classified) Locations 1598 Luminaires 1598A Marine Locations CSA Standards C22.2 No. 17 Standard Materials: Housing, mounting modules, component pallets polyphenylene sulfide (PPS) Guard, hub inserts, stanchion elbow, hardware stainless steel Globe heat tempered Gaskets silicone rubber Electrical Ratings: 120, multi-tap/mt (120, 208, 240 and 277), Dual-Tap/DT (120, 277 volts), Tri-Tap/TT (120, 277, 47 volts) 480 volt, 600 volt, 220 / 240 volt-50 Hz W HPS; W MH and Pulse Start MH Options: The following special options are available from the factory by adding suffix to luminaire Cat. No.: Description Suffix Wall Mount Arm. For converting ceiling mount luminaire to a wall mount... N2MV-WM1 Ballast-Gard starter cut-out switch. Prevents starter pulsing when lamp is cycling or inoperative; prolongs ballast and ignitor life. Available for use with watt HPS... BG Factory Assembled. For a factory assembled luminaire with lamp installed... FA Instant Restrike. Enables a hot HPS lamp to immediately restrike after a momentary loss of arc due to voltage fluctuation or power outage. It has no effect on the warm-up period of cold lamps W LX HPS only... IR Quartz Auxiliary Lighting. Comes to full brightness immediately and remains lit until the HID lamp attains 60 70% of full illumination. For non-hazardous locations only. (Note: QTZ lamp not included; use 100W single ended lamp Q100DC, Q100CL/DC, or 100Q/CL/DC) Consult factory for top-hat limitations... QTZ Fused. To protect ballast and capacitor against abnormal line conditions... S658 (Not available with /MT ballast ) (Not for use in Canada) (Not suitable for marine applications) Furnished with s... S714 Teflon Coated Globe. For additional protection against breakage. For use with W HPS, W MH and pulse start MH... S808 Accessories: See pages for complete listing. L US: CAN: Copyright 2015 Eaton s Crouse-Hinds Business
2 L N2MV Series W High Pressure Sodium Non-metallic Cl. I, Div. 2, Groups A, B, C, D Cl. II, Groups F, G Cl. III & Simultaneous Presence (100W max) Marine & Wet Locations, R, 4, 4X; IP56 To complete the catalog #, include information in notes 1, 2 and below. For guards and other optics see N2MV Series - Ordering By Components page. Mounting Style Hub Size With G0 Globe and P Guard BASIC CATALOG NUMBER With GR05 Glass Refractor * Pendant Mount /4 50 N2MVS2A050GP N2MVS2A050GR05 1 N2MVSA050GP N2MVSA050GR05 /4 70 N2MVS2A070GP N2MVS2A070GR05 1 N2MVSA070GP N2MVSA070GR05 /4 100 N2MVS2A100GP N2MVS2A100GR05 1 N2MVSA100GP N2MVSA100GR05 /4 150 N2MVS2A150GP N2MVS2A150GR05 1 N2MVSA150GP N2MVSA150GR05 Ceiling Mount Thru-Feed /4 50 N2MVS2C050GP N2MVS2C050GR05 1 N2MVSC050GP N2MVSC050GR05 /4 70 N2MVS2C070GP N2MVS2C070GR05 1 N2MVSC070GP N2MVSC070GR05 /4 100 N2MVS2C100GP N2MVS2C100GR05 1 N2MVSC100GP N2MVSC100GR05 /4 150 N2MVS2C150GP N2MVS2C150GR05 1 N2MVSC150GP N2MVSC150GR05 Stanchion 1 1 /2 50 N2MVSJ050GP N2MVSJ050GR05 Mount 1 1 /2 70 N2MVSJ070GP N2MVSJ070GR05 25 Angle 1 1 /2 100 N2MVSJ100GP N2MVSJ100GR /2 150 N2MVSJ150GP N2MVSJ150GR05 * For GR02 Type II Refractor, change "GR05" at end of catalog number to "GR02". Ex. N2MVS2A050GR02 For GR0 Type III Refractor, change "GR05" at end of catalog number to "GR0". Ex. N2MVS2A050GR0 1. Add voltage suffix to end of catalog number Standard Voltage Ballasts 60Hz NEC/UL CEC/CSA (cul) Voltage Multi Tap Dual Tap 120V 480V Tri Tap Dual Tap 120V Suffix /MT /DT /120 /480 /TT /DT /120 Optional Voltage Ballasts - 50 or 60Hz CEC/CSA (cul) - CWI Isolated Ballasts EXPORT Voltage 208V CWI 240V CWI 480V CWI 600V CWI 220V 60Hz 220V 50Hz 20V 50Hz 240V 50Hz Suffix /208CWI /240CWI /480CWI /600CWI /220 / /20 50 / W HPS Luminaires: For 55V lamps - add suffix LX; for 100V lamps - add suffix CE. 50W HPS luminaire is dual tap only.. Options - Add the required option suffixes, see page 1005, in alpha-numeric order. L US: CAN: Copyright 201 Eaton s Crouse-Hinds Business
3 N2MV Series W Pulse Start Metal Halide Non-metallic Cl. I, Div. 2, Groups A, B, C, D Cl. II, Groups F, G Cl. III & Simultaneous Presence (100W max) Marine & Wet Locations, R, 4, 4X; IP56 L To complete the catalog #, include information in notes 1 and 2 below. For guards and other optics see N2MV Series - Ordering By Components page. Mounting Style Hub Size With G0 Globe and P Guard * BASIC CATALOG NUMBER With GR05 S828 Glass Refractor Pendant Mount /4 150 N2MVM2A150GP S828 N2MVM2A150GR05 S828 1 N2MVMA150GP S828 N2MVMA150GR05 S828 /4 175 N2MVM2A175GP S828 N2MVM2A175GR05 S828 1 N2MVMA175GP S828 N2MVMA175GR05 S828 Ceiling Mount Thru-Feed /4 150 N2MVM2C150GP S828 N2MVM2C150GR05 S828 1 N2MVMC150GP S828 N2MVMC150GR05 S828 /4 175 N2MVM2C175GP S828 N2MVM2C175GR05 S828 1 N2MVMC175GP S828 N2MVMC175GR05 S828 Stanchion Mount 1 1 /2 150 N2MVMJ150GP S828 N2MVMJ150GR05 S Angle 1 1 /2 175 N2MVMJ175GP S828 N2MVMJ175GR05 S828 * For GR02 Type II Refractor, change "GR05" at end of catalog number to "GR02". Ex. N2MVM2A150GR02-S828 For GR0 Type III Refractor, change "GR05" at end of catalog number to "GR0". Ex. N2MVM2A150GR0-S Add voltage suffix to end of catalog number Standard Voltage Ballasts 60Hz NEC/UL CEC/CSA (cul) Voltage Multi Tap 120V 480V Tri Tap 120V Suffix /MT /120 /480 /TT /120 Optional Voltage Ballasts - 50 or 60Hz EXPORT Voltage 220V 60Hz 220V 50Hz 20V 50Hz 240V 50Hz Suffix /220 / /20 50 / Options - Add the required option suffixes, see page 1005, in alpha-numeric order. L US: CAN: Copyright 201 Eaton s Crouse-Hinds Business 1007
4 L N2MV Series W Metal Halide Non-metallic Cl. I, Div. 2, Groups A, B, C, D Cl. II, Groups F, G Cl. III & Simultaneous Presence (100W max) Marine & Wet Locations, R, 4, 4X; IP56 To complete the catalog #, include information in notes 1, 2 and below. For guards and other optics see N2MV Series - Ordering By Components page. Mounting Style Hub Size With G0 Globe and P Guard BASIC CATALOG NUMBER With GR05 Glass Refractor * Pendant Mount /4 70 N2MVM2A070GP N2MVM2A070GR05 1 N2MVMA070GP N2MVMA070GR05 /4 100 N2MVM2A100GP N2MVM2A100GR05 1 N2MVMA100GP N2MVMA100GR05 /4 175 N2MVM2A175GP N2MVM2A175GR05 1 N2MVMA175GP N2MVMA175GR05 Ceiling Mount Thru-Feed /4 70 N2MVM2C070GP N2MVM2C070GR05 1 N2MVMC070GP N2MVMC070GR05 /4 100 N2MVM2C100GP N2MVM2C100GR05 1 N2MVMC100GP N2MVMC100GR05 /4 175 N2MVM2C175GP N2MVM2C175GR05 1 N2MVMC175GP N2MVMC175GR05 Stanchion 1 1 /2 70 N2MVMJ070GP N2MVMJ070GR05 Mount 1 1 /2 100 N2MVMJ100GP N2MVMJ100GR05 25 Angle 1 1 /2 175 N2MVMJ175GP N2MVMJ175GR05 * For GR02 Type II Refractor, change "GR05" at end of catalog number to "GR02". Ex. N2MVM2A070GR02 For GR0 Type III Refractor, change "GR05" at end of catalog number to "GR0". Ex. N2MVM2A070GR0 1. Add voltage suffix to end of catalog number Standard Voltage Ballasts 60Hz NEC/UL CEC/CSA (cul) Voltage Multi Tap 120V 480V Tri Tap 120V Suffix /MT /120 /480 /TT /120 L Optional Voltage Ballasts - 50 or 60Hz CEC/CSA (cul) - CWI Isolated Ballasts EXPORT Voltage 208V CWI 240V CWI 600V CWI 220V 60Hz 220V 50Hz 20V 50Hz 240V 50Hz Suffix /208CWI /240CWI /600CWI /220 / /20 50 / W ballast not available in 480V.. Options - Add the required option suffixes, see page 1005, in alpha-numeric order US: CAN: Copyright 201 Eaton s Crouse-Hinds Business
5 N2MV Series Ordering by Components L N2MV luminaires are available in components. A complete luminaire consists of: I. N2MV Cover (Mounting Module) II. N2MV Ballast Housing Include voltage and required option(s) III. Globe, Refractor, Guard, Reflector I. N2MV Cover (Mounting Module): Type Conduit Cat. # Pendant /4" N2APM2 1" N2APM Ceiling /4" N2CM2 1" N2CM Wall (Use wall bracket accessory with Ceiling Cover) /4" N2MV WM1 and N2CM2 1" N2MV WM1 and N2CM Stanchion 25 Degree Angle 1 1 /2" N2JM5 II. Ballast Housings: Complete catalog number must have the voltage suffix (MT shown) and any options suffixes. Type Cat. # High Pressure Sodium 50 N2MVS050/MT 70 N2MVS070/MT 100 N2MVS100/MT 150 N2MVS150/MT LX Metal Halide 70 N2MVM070/MT 100 N2MVM100/MT 175 N2MVM175/MT III. Globe, Refractors, Guards and Reflectors: Type Cat. # Globe G0 Globe Teflon Coated G0S808 Globe Guard P Reflector Dome RD79 Reflector Angle RA79 Refractor Type 2 GR02 Refractor Type GR0 Refractor Type 5 GR05 Refractor Guard P2 Large Plastic Refractor Type 2 PGR02 Large Plastic Refractor Type PGR0 Large Plastic Refractor Type 5 PGR05 L US: CAN: Copyright 201 Eaton s Crouse-Hinds Business 1009
6 L N2MV Series Family Tree Champ H.I.D Luminaires *Plastic refractors are non-hazardous areas only (50-100W Max.) L US: CAN: Copyright 201 Eaton s Crouse-Hinds Business
7 N2MV Series Temperature Performance Data L Champ H.I.D Luminaires High Pressure Sodium 40 TA T4A T2C/T4A TA TA T4A T2C/T4A TA T2D T4A T2C/T4A T2C T2C Metal Halide (S828) 175 (Includes S828) 40 TC T4 T2B/T TB T2B T4 T2B/T T2B 40 T T2 55 L US: CAN: Copyright 201 Eaton s Crouse-Hinds Business 1011
8 L N2MV Series Dimensions and Weights Dimensions In Inches: Ceiling Mount Ceiling Mount Top View L Pendant Mount 25 Angle Stanchion Mount Net Luminaire Weights (lbs.): Luminaire Series Luminaire with Globe, Guard (lbs.) Luminaire with Globe, Guard (lbs.) N2VMS N2MVM / / / / / Wall Arm Mount Type Lbs. Type Lbs. Add for mounting modules: Pendant 1 1 /4 Flexible Pendant 1 1 /2 Ceiling 2 /4 Wall 4 1 /2 Quad-Mount 1 /2 Angle Stanchion 1 /2 Straight Stanchion 4 1 /2 Add for reflectors: Dome 1 1 /4 0 Angle 1 /4 Deduct: 1 lb. for luminaire without P Guard. Add: 5 1 /2 lbs. for luminaire with GR05 refractor US: CAN: Copyright 201 Eaton s Crouse-Hinds Business
9 N2MV Series Photometric Data L Champ H.I.D Luminaires : 150W/E-2-1 /2 clear high pressure sodium (HPS) Total bare lamp lumens: All data provided is for high pressure sodium luminaires with 150W/E-2-1/2 clear lamps. Use conversion factors (multipliers) shown below for other clear lamp types and wattages. Consult Eaton's Crouse-Hinds for additional photometric data on any Champ series luminiares. Luminaire with Globe and Dome Reflector Multipliers (for use with candela curve only). Isofootcandle Chart: Luminaire with Globe and Dome Reflector Luminaire Series N2MVS Conversion Factor Luminaire spacing ratio: 1.90 Coefficient of Utilization Effective Floor Cavity Reflectance 20% % Reflectance Room Cavity Ratio Eff. Ceil. Wall % Reflectance Room Cavity Ratio Eff. Ceil. Wall Isofootcandle Chart: Luminaire with Globe and 0 Angle Reflector Isofootcandle charts show illumination in footcandles on work plane 10 feet below light center. Multiply by factor shown to convert to other mounting heights. Height (Ft.) Factor Height (Ft.) Factor L US: CAN: Copyright 201 Eaton s Crouse-Hinds Business 101
DMV Series W For Combustible Dusts
L DMV Series 50-250W For Combustible Dusts Champ H.I.D. Luminaires Cl. I, Div. 2, Groups A, B, C, D Restricted Breathing Cl. I, Div. 2 & Zone 2 (Suffix S826) Certified for IEC Zone 2 (Suffix S826TB) Cl.
4L EVM Hazard Gard H.I.D. Luminaires Mogul Base Factory Sealed (Groups C.D)
4L EVM Hazard Gard H.I.D. Luminaires Mogul Base Factory Sealed (Groups C.D) Cl. I, Div. 1 Groups B (GB suffix),c,d (with suffix GB), IIB IIA Paint Spray (100W max) Application: Hazard Gard luminaires are
Applications. Straight Stanchion-Mount Fixture with Prismatic Glass Refractor and Guard. Pendant Mount Fixture with Prismatic Glass Refractor
Mercmaster III HID 50-250 Watt Luminaires Applications Enclosed and gasketed fixtures suitable for use in: Marine and wet locations A wide range of industrial, chemical processing and other areas where
Applications. Standard Materials
Code Master Jr. HID Factory Sealed Luminaires Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 50 W, 70 W, 00 W, 75 W PSMH. 75 W MH V. Medium Base. For Use with Threaded Metal Conduit. Class I, Division
Applications. Standard Materials. Certifications and Compliances
Code Master 2 HID Factory Sealed Luminaires Class I, Division 1 and 2, Groups C, D Class I, Division 1 and 2, Groups B, C, D Applications Ideal for use in chemical and petrochemical plants, such as manufacturers
Applications. Standard Materials. Certifications and Compliances
Code Master 2 HID Factory Sealed Luminaires NEC: Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Marine Type Electric Fixtures Outside Type (Salt Water) Class I, Division
HID/AREA: NEC/CEC EXPLOSIONPROOF. Applications. NEC/CEC Certifications and Compliances
Integrally Ballasted. 50 W, 70 W, 100 W, 150 W, 250 W, 400 W HPS; 175 W, 250 W, 320 W, 350 W, 400 W PSMH; 175 W, 250 W, 400 W MH. Applications Ideal for use in chemical and petrochemical plants, such as
CEC: Class I, Division 1 and 2, Groups B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Type 4X Exd IIB + H 2
Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 75 W PSMH. 75 W MH. Medium Base. For Use with Threaded Metal Conduit. Applications For use in chemical and petrochemical plants, such as manufacturers
Mercmaster LED Series Luminaires Enclosed and Gasketed Fixtures
Mercmaster Series Luminaires LIGHTING: ENCLOSED AND GASKETED AREA /INDUCTION Applications Enclosed and gasketed fixtures suitable for use in: Marine and wet locations A wide range of industrial, chemical
Lighting: Explosionproof Area HID. Applications. Standard Materials
Code Master Jr. HID Factory Sealed Luminaires Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 50 W, 70 W, 00 W, 75 W PSMH. 75 W MH V. Medium Base. For Use with Threaded Metal Conduit. Class I, Division
Champ Fixtures. Class I, Division 2 Class I, Zone 2. Floodlight
Champ Fixtures Class I, Division Class I, Zone Floodlight Champ Floodlight Fixtures Whenever Cooper Crouse-Hinds develops a new product, system, or procedure, we focus on one overriding question: Will
Fluorescent Luminaires Hazardous and Non-Hazardous
Fluorescent Luminaires Hazardous and Non-Hazardous Description Page No. Application/Selection 810 General Purpose Luminaires VF Vaporgard TM Series 811-813 Non-Metallic Luminaires NFL Series 843-845 N2MVF
Areamaster 1000 Floodlights Integrally Ballasted W HID For hazardous locations.
A, IIB, IIC Applications Powerful, efficient weatherproof lighting for large areas such as: Pulp and paper mills Processing plants Chemical plants Oil refineries Foundries Storage areas Waste and sewage
HID/FLOODLIGHT: NEC/CEC EXPLOSIONPROOF. Applications. Options
Applications UL Listed for Outside Type (Salt Water). Ideal in Class I, Division 1 and 2 installations in refineries, in pipeline transportation facilities, at drilling rigs and in production facilities
LIGHTING: EXPLOSIONPROOF FLOODLIGHT. Applications. Options
Code Master 2 HID Factory Sealed Floodlights NEC: Class 1, Division 1 and 2, Groups C, D Marine Type Electric Fixtures Outside Type (Salt Water) CEC: V Class I, Division 1 and 2, Groups B, C, D Class II,
Code Master 2 Factory Sealed Induction Lighting System Explosionproof
Lighting Induction Code Master 2 Factory Sealed Induction Lighting System NEC/CEC: Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Marine Type Electric Fixtures Outside
Code Master 2 Factory Sealed Induction Lighting System Explosionproof
Code Master 2 Factory Sealed Induction Lighting System Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Marine Type Electric Fixtures Outside Type (Salt Water) NEMA 4X
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE IMPORTANT SAFEGUARDS READ AND FOLLOW ALL SAFETY INSTRUCTIONS
Champ Fluorescent Luminaires DMVFB Auxiliary Series - 52, 64, & 84 Watt Installation & Maintenance Information SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE IF 1713 IMPORTANT SAFEGUARDS READ AND FOLLOW
SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent
SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent S A F Class I, Division 2, Groups A, B, C & D Class II, Division 1 & 2, Groups E, F & G Class III Zone 2, Groups IIA, IIB & IIC UL 844
SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent
SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent S A F Class I, Division 2, Groups A, B, C & D Class II, Division 1 & 2, Groups E, F & G Class III Zone 2, Groups IIA, IIB & IIC UL 844
Areamaster LED Flood/High Bay Luminaires
Applications Typical applications include: Pulp and paper mills Processing plants Chemical plants Oil refineries Foundries Storage areas Waste and sewage treatment Parking garages Other areas where dust,
SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent
SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent S A F Class I, Division 2, Groups A, B, C & D Class II, Division 1 & 2, Groups E, F & G Class III Zone 2, Groups IIA, IIB & IIC UL 844
Hazardous Area LED Lighting Champ FMV LED Luminaires. Champ FMV. LED floodlights for harsh and hazardous areas
Hazardous Area LED Lighting Champ FMV LED Luminaires Champ FMV LED floodlights for harsh and hazardous areas Champ FMV LED floodlights Safe. Reliable. Efficient. Featuring the industry's broadest range
SAFR LED SERIES S A F R L E D. Hazardous Location LED Luminaire
SAFR LED SERIES Hazardous Location LED Luminaire Class I, Division 2, Groups A, B, C & D Class II, Division & 2, Groups E, F & G Class III Class I, Zone 2, Groups IIA, IIB & IIC UL 8750 LED Safety UL 844
SXPJ SERIES S X. HID & Compact Fluorescent Lighting for Hazardous and Hostile Locations
SXPJ SERIES HID & Compact Fluorescent Lighting for Hazardous and Hostile Locations S X PJ Class I, Division 1, Group C & D Class II, Division 1, Groups E, F & G Class III Zone 1, Groups IIA & IIB Factory
Mercmaster II HID Luminaires High Pressure Sodium and Pulse Start Metal Halide. Mogul Base UNILETS for Use with Threaded Metal Conduit.
UNILETS for Use with Threaded Metal Conduit. Applications Enclosed and gasketed HID lighting fixtures for use in tunnels, walkways, bridges, storage facilities, processing plants, parking lots, foundries,
Applications. Illustrated Features
Applications For use in locations where a high degree of corrosion resistance is required. FR Series: For use in areas where high humidity or water vapor are present Typical uses include meat- or food-processing
AFL FLOODLIGHT SERIES
AFL FLOODLIGHT SERIES A FL Flood Lighting for Hazardous Locations Class I, Division 2, Groups A, B, C & D UL 844 Hazardous Locations UL 598A Marine Outside Type Zone 2, Groups IIA, IIB & IIC CUL Cast Aluminum
G1-1. HID Lighting Fixtures: Explosionproof, Dust-Ignitionproof. Page Description
HID Lighting Fixtures: Explosionproof, Dust-Ignitionproof 1-1 Code Master 2 with Polyester Reflector Code Master Jr. without Reflector Code Master 2 Floodlight A-51 roup A & B with Porcelain Reflector
F1-1. HID Lighting: Enclosed and Gasketed. Description. 2, 3 Mercmaster III Family Tree Mercmaster III HID Low Profile Lighting Fixtures
HID Lighting: Enclosed and Gasketed 1-1 Page Description 2, 3 Mercmaster III amily Tree 2-22 Mercmaster III HID Low Profile Lighting ixtures 23-54 Mercmaster III HID 50-250W Lighting ixtures Mercmaster
Mercmaster LED Series Luminaires Enclosed and Gasketed Fixtures
ATEX/IECEx: Zone 2 and 22 II 2 GD Lighting LIGHTING: ENCLOSED AND GASKETED AREA LED/INDUCTION Applications Enclosed and gasketed fixtures suitable for use in: Marine and wet locations A wide range of industrial,
SAFR LED S A F R L E D. LED Area Lighting for Hazardous Locations
LED Class I, Division 2, Groups A, B, C & D Class II, Division & 2, Groups E, F & G Class III Class I, Zone 2, Groups IIA, IIB & IIC UL 8750 LED Safety UL 844 Hazardous Locations UL 598 Wet Locations UL
SAFJ LED SERIES S A L E D. Hazardous Location Compact LED
SAFJ LED SERIES Hazardous Location Compact LED Class I, Division 2, Groups A, B, C, & D Class II, Division 1 & 2, Groups E & F Class III Simultaneous Presence Enclosed & Gasketed Wet Locations NEMA 3R,
Code Master Incandescent Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof For use with threaded metal conduit.
Applications For use in hazardous locations such as plants where plastics, paints, thinners and petrochemicals are manufactured. For use in chemical and petrochemical plants, such as manufacturers of plastics,
Heavy industrial LED lighting Champ Pro PFM LED luminaires. Champ PFM. LED floodlights for heavy industrial areas. Authorized Distributor
Heavy industrial LED lighting Champ Pro PFM LED luminaires Champ PFM LED floodlights for heavy industrial areas Authorized Distributor Champ Pro PFM LED floodlights Safe. Reliable. Efficient. Featuring
MHDS SERIES M H D S. Stainless Steel Marine Heavy Duty Luminaire for Hazardous Locations
MHDS SERIES Stainless Steel Marine Heavy Duty Luminaire for Hazardous Locations Class I, Division 2, Groups A, B, C & D Class II, Division 2, Groups F & G Class III UL 844 Hazardous Locations UL 198A Marine
EDS / EFS Series Control Stations
EDS / EFS Series Fully Assembled EFS and EDS Factory Sealed Devices Cl. I, Div. & 2, Groups B*, C, D Cl. II, Div., Groups E, F, G NEMA, 7B*CD, 9EFG Applications: Factory sealed enclosures are installed
SXPJ SERIES S X azz.com/rigalite
SXPJ SERIES HID Lighting & Compact for Explosion Fluorescent Proof, Lighting Hazardous for and Hazardous Hostile Locations and Hostile Locations S X PJ Class I, Division 1, Group C & D Class II, Division
G1-24. Applications UL listed for marine type electric fixtures--outside. Ideal in Class I, Div. 1 and 2 installations
1-24 Applications UL listed for marine type electric fixtures--outside type (salt water). Ideal in Class I, Div. 1 and 2 installations in refineries, pipeline transportation facilities; at drilling rigs
CEC: Class I, Division 1 and 2, Groups B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Type 4X Exd IIB + H 2 3/4 CAP-75 1 CAP-100
Code Master Jr. HID Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof Integrally Ballasted. 50 W, 70 W, 100 W, 150 W HPS; 50 W, 70 W, 100 W, 175 W PSMH. 175 W MH. Medium Base. For Use with Threaded
FV Series Nonmetallic Fluorescent Luminaires For Hazardous and Adverse Locations
Applications For use in hazardous locations defined by the NEC and CEC as Class I, Division 2, Groups A, B, C and D; Class II, Division 2, Groups F and G; Marine Outdoor Salt Water; UL1598A and. As well
Champ MLL LED luminaires
The Champ MLL linear LED is specifically designed to replace fluorescent T12, T8 and T5HO lighting in harsh and hazardous applications. The rugged and durable design features the industry s most versatile
MHD2/MHDO SERIES MHD2. Marine Heavy Duty Outdoor Non-Metallic Fluorescent CLASS 1 DIVISION 2 FLUORESCENT LIGHT
MHD2/MHDO SERIES Marine Heavy Duty Outdoor Non-Metallic Fluorescent Non-metallic, glass reinforced polyester housing. 3/4 in. NPT aluminum hub. Captive stainless steel latches. Stainless steel mounting
N2LED Series Emergency Luminaires Non-Metallic Emergency Egress Lighting Systems with Remote or Direct Mounted Lamps.
Applications Enclosed and gasketed, non-metallic emergency lighting system suitable for use in areas where flammable gases or vapors may become present due to abnormal, unusual or accidental conditions
Standard Grade 23 Inch Reflector/Refractor. Ordering Information. series wattage source voltage optics color options options BL-LB1
Job Type Dimensions Specifications B A C NRTL/C Damp Location D Slick-On Quick-On E A B C D E 9-1/2" 2" 9-1/2" 26-11/16" 23-1/8" 241 mm 51 mm 241 mm 678 mm 587 mm 9-1/2" 1-1/8" 8-5/8" 25-13/16" 23-1/8"
MHD2/MHDO SERIES M H D 2. Marine Heavy Duty Non-Metallic Fluorescent
MHD2/MHDO SERIES Marine Heavy Duty Non-Metallic Fluorescent Class I, Division 2, Groups A, B, C & D Class II, Division 2, Groups F & G Class III Zone 2, Groups IIA, IIB & IIC UL 844 Hazardous Locations
ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY
EDS2274 Pos D.E. Selector Switch Cooper Crouse-Hinds Catalog Number Manufacturer Description Weight per unit Product Category Features Box Type SINGLE GANG Contact Configuration 4NO-4NC Number of Circuits
MOGUL BASE HID FIXTURES
KILLARK Z A H LO C MOGUL BASE HID FIXTURES Class I, Div. 1 & 2 Groups C,D Class l, Zone 1 & 2, Groups llb,lla Class l, Zone 1, AEx d IIB Class II, Div. 1 & 2, Groups Class III, Div. 1 & 2 Suitable for
1E EJB Junction Boxes Cl. I, Div. 1 and 2, Groups B, C, D
EJB Junction Boxes Cl. I, Div. and 2, Groups B, C, D Cl. II, Div., Groups E, F, G Cl. II, Div. 2, Groups F, G Cl. III NEMA 3, 4, 4X*,, Ex d IIB + H2 T6, IP66 Explosionproof Dust-Ignitionproof Raintight
Standard Grade 14 Inch Reflector. Ordering Information
Job Type Dimensions Specifications B A NRTL/C C Damp Location D E Slick- On Quick- On F A B C D E F 9-1/2" 2" 9-1/2" 20-22/32 24-27/32" 9-7/16" 14-1/4" 241 mm 51 mm 241 mm 536-631 mm 240 mm 362 mm 9-1/2"
ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY
EDSC210 -Way Switch Cooper Crouse-Hinds Catalog Number Manufacturer Description Weight per unit Product Category Features Box Type Contact Configuration Current Rating Voltage Rating Material, Color, and
220/230/240V Watt High Pressure Sodium - Hazardous Location Lighting - C1D2 - Pole Mount
220/230/240V Watt High Pressure Sodium - Hazardous Location Lighting - C1D2 - Pole Mount Part #: HAL-PRM-250W-HPS-220V-PT Page: 1 Made in the USA The efficient HAL-PRM-250W-HPS-220V-PT high pressure sodium
KH Series Kemlux III Enclosed/Gasketed
For use in corrosive, harsh, hazardous applications such as chemical, petrochem, marine, power generation, pharmaceutical, or food processing plants Mogul base socket on tanks C, D & E Medium base socket
INCANDESCENT/COMPACT FLUORESCENT/MEDIUM BASE HID
KILLARK INCANDESCENT/COMPACT FLUORESCENT/MEDIUM BASE HID Class I, Div. 1 & 2, Groups C,D Class I, Zones 1 & 2, Groups llb, lla Class II, Div. 1 & 2, Groups E,F,G Class III, Div. 1 & 2 Suitable for wet
Pauluhn ZPL explosionproof LED luminaires For drilling and marine applications
Pauluhn ZPL explosionproof linear LEDs are designed to replace fluorescent T12, T8 and T5HO lighting on marine vessels and land-based and offshore drilling platforms. The rugged and durable design features
RSS SERIES R S S. Fluorescent Lighting for Hazardous Locations
RSS SERIES Fluorescent Lighting for Hazardous Locations R S S Class I, Division 2, Groups A, B, C & D UL 844 Hazardous Location UL 1598A Marine Outside Type CUL Wet Locations IP66 55 Ambient Temperature
PGL350P W PS Wallpack
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 PGL350P1281 350W PS Wallpack Hubbell Lighting, Inc. Catalog Number Manufacturer Description Weight per unit Product Category
COMPACT FLUORESCENT EMERGENCY FIXTURES
KILLARK H A Z LO C COMPACT FLUORESCENT EMERGENCY FIXTURES VE3Q/VE4Q Class I, Div. 2, Groups A,B,C,D Class l, Zone 2, Groups IIC, llb, lla Class II, Div. 1 & 2, Groups E,F,G Class III NEMA 3, 4, 4X IP66
WPP25 250W MP Wal-Pak Borosilicate Glass Hinged/Removabl
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 WPP25 250W MP Wal-Pak Borosilicate Glass Hinged/Removabl Catalog Number Manufacturer Description Weight per unit Product
Areamaster LED Flood/High Bay Luminaires For Hazardous Locations. 250 W, 400 W, 750 W, 1000 W HID Light Level Equivalent
Class I, Division 2, Groups A, B, C, D Class I, Zone 2 Group IIC Class II, Division 1, Groups E, F, G Class II Division 2, Groups F, G Class III Simultaneous Exposure Type 3R, 4, 4X IP66/67 Applications
Class I Div 2 LED Pivoting Light - 4 foot 2 lamp - 2nd Gen LED T series Style - Back Mount Swivel
Class I Div 2 LED Pivoting Light - 4 foot 2 lamp - 2nd Gen LED T series Style - Back Mount Swivel Part #: HAL-48-2L-LED-BMSW-G2 Page: 1 Made in the USA The Larson Electronics HAL-48-2L-LED-BMSW-G2 Hazardous
Haz. HazMax Summit/ss TECHNICAL SPECIFICATIONS
Haz HazMax Summit/ss APPLICATIONS High, mid & low bay Petrochemical facilities Hazardous locations Munitions manufacturing and storage Watertight requirements Waste water treatment plants Dusttight requirements
Areamaster 100 Wide-Beam Floodlights 70 W, 100 W, 150 W HPS; 70 W, 100 W, 150 PSMH For general, marine and hazardous locations.
Areamaster 100 Wide-Beam Floodlights NEC CEC V Class II, Divisions I and 2, Groups E, F, G V Class III Applications Highly efficient, all-weather flood-lighting for lower wattage service. Well suited for:
EDS / EFS Series Control Stations
EDS / EFS Series Control Stations Fully Assembled EFS and EDS Factory Sealed Devices Cl. I, Div. & 2, Groups B*, C, D Cl. II, Div., Groups E, F, G NEMA, 7B*CD, 9EFG Applications: Factory sealed enclosures
Sales: Malux Finland Oy, P.O.Box 69, FI Porvoo, Phone , Fax ,
Product description 2 Product key features COOPER Crouse-Hinds EVZ series HID pendant luminaire is Ex de designed with rugged fixture and impact duration tempered glass globe. It has 2 versions with full
ENR Value Series Dead Front Interlocked Circuit Breaking Receptacles
ENR Value Series Dead Front Interlocked Circuit Breaking s Cl. I, Div. & 2, roups B, C, D Cl. II, Div. & 2, roups F, Cl. III, 7BCD, 9F, 2 Dust-Ignitionproof Raintight et Locations ENP Plugs Applications:
FLUORESCENT BI-PIN/MEDIUM BASE HID
KILLARK Z A H LO C FLUORESCENT BI-PIN/MEDIUM BASE HID Cass I, Div. 2, Groups A,B,C,D* Cass, Zone 2, Groups C,B,A Cass II, Div. 1 & 2, Groups E,F,G* Cass III Suitabe for wet ocations Marine Rated (US Ony)
Champ NVMV Series Ex-Protected Luminaire for IEC and ATEX Applications
Champ NVMV Series Ex-Protected Luminaire for IEC and ATEX Applications Header Text Champ NVMV Series - Ex-Protected Luminaires for IEC and ATEX Applications Cost-effective, energy-efficient luminaires
DESCRIPTION Galleria's beauty and versatility make it an excellent choice for roadway and general area lighting applications. An aesthetic reveal in the formed aluminum housing gives the Galleria a distinctive
ATX PC Series Floodlights Flameproof. Metal Halide, High Pressure Sodium, Mercury Vapor, Halogen
Applications Designed for large area lighting in industrial outdoor and indoor hazardous areas. Ideal for use in Zones 1 and 2 and 21 and 22 in the oil and gas industry. In locations such as: refineries,
Perimaliter Wallpacks
ENERGY SAVING Outdoor Lighting Perimaliter Wallpacks Perimaliter III PVL3 / PGM3 Perimaliter II PGL Solutions for Perimeter/Area Lighting Perimaliter Wallpacks The Perimaliter wallpack has been the design
Champ Pro PVM Series LED luminaires for harsh & heavy industrial areas
Pro Series LED Lighting Champ Pro PVM LED Luminaires Champ Pro PVM Series LED luminaires for harsh & heavy industrial areas 3,000 to 25,000 lumen LED high bay luminaires Authorized Distributor Champ Pro
HOLOPHANE Outdoor Lighting
68 Sign Lighting Signs have two purposesto attract attention and to convey a message. And during nighttime hours, sign lighting must provide visibility and legibility to deliver the appropriate message.
ExceLine 1611 Clovis R. Barker Road San Marcos, TX Fax: PT#: EXSP038A0712
Type No. Catalog No. Job. Name ILXGHB MasterColor Elite Series APPLICATIONS Applications include industrial facilities, manufacturing plants, retail applications, and gymnasiums. CONSTRUCTION The ILX MasterColor
GHG43 Series Control Stations
GHG43 Series Control Stations Nonmetallic or 316L Stainless Steel UL/cUL listed Cl. I, Div. 2, Groups A, B, C, D Cl. I, Zones 1 and 2, (A) Ex de IIB + H2 T6 Cl. II, Div. 1, Groups E, F, G (cul) PTB ATEX
Rig-A-Lite LED Luminaire Guide. Superior LED Technology for Hazardous and Severe Environments. Five-Year Warranty
Rig-A-Lite LED Luminaire Guide Superior LED Technology for Hazardous and Severe Environments Five-Year Warranty Rig-A-Lite LED Luminaires The Rig-A-Lite LED luminaires are the perfect combination of dependability,
Hazlux Industrial Lighting Fixtures
Safety Technology Hazlux Industrial Lighting Fixtures Thomas & Betts. Your best connection for innovative solutions. Wire & Cable Management Cable Protection Systems Power Connection & Control Safety Technology
EWE. Ex de. Cooling fins
EWE Cooling fins - Suitable for installation with ambient temperature from -50 C to +60 C - Suitable for discharge lamps of up to 150W - Suitable for loop-in/loop-out connections - Zones 1, 2, 21, 22 4
MAR SERIES Fluorescent Lighting for Hazardous Locations
MAR SERIES M AR Fluorescent Lighting for Hazardous Locations Class I, Division 2, Groups A, B, C, & D Seismic Tested UL 844 Hazardous Locations UL 924 Emergency Lighting UL 1598A Marine Outside Type CSA
Variety of mounting methods. UL, CUL, and CSA listed for general and hazardous locations
PREDATOR The Predator floodlight offers versatility, efficiency, and performance, which provides a unique solution to a variety of lighting needs. With the Predator, Holophane continues its legacy of utilizing
SURFACE/CEILING & SUSPENDED MOUNT INSTALLATION
SURFE/CEILING & SUSPENDED MOUNT INSTALLATION E477827 E477827 APPLICATION NL luminaires are designed for use indoors, outdoors, wet locations, areas containing moisture, dirt, corrosion, vibration and rough
LED lighting for drilling & marine Pauluhn ZPL LED luminaires. Pauluhn ZPL. LED luminaires for drilling & marine applications
LED lighting for drilling & marine Pauluhn ZPL LED luminaires Pauluhn ZPL LED luminaires for drilling & marine applications Pauluhn ZPL explosionproof LEDs Safe. Reliable. Efficient. Featuring the industry's
Installation Instructions for Appleton Mercmaster LED Luminaire
650559-000 INSTRUCTION SHEET Installation Instructions for Appleton Mercmaster LED Luminaire FOR PROPER AND SAFE INSTALLATION OF THIS PRODUCT, PLEASE READ THE FOLLOWING INSTRUCTIONS. Product Safety Signal
Class 1 Div 2 LED Pivoting Light - 2 foot 2 lamp - LED T series Style (fluorescent replacement)
Class 1 Div 2 LED Pivoting Light - 2 foot 2 lamp - LED T series Style (fluorescent replacement) Part #: HAL-24-2L-LED-BMSW Page: 1 Made in the USA The Larson Electronics HAL-24-2L-LED-BMSW Hazardous Area
Low brightness and uplighting combine to create a pleasing visual environment. Softbay Series
Low brightness and uplighting combine to create a pleasing visual environment Softbay Series Keene MAKES LIGHT WORK Softbay is a durable performer in light-to-moderate industrial environments and an enduring
ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY[R] IRON ALLOY (US), COPPER FREE ALUMINUM (CANADA)
![ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY[R] IRON ALLOY (US), COPPER FREE ALUMINUM (CANADA)](/thumbs/86/93535574.jpg "ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY[R] IRON ALLOY (US), COPPER FREE ALUMINUM (CANADA)")
804 South Street 75964-726, TX Nacogdoches Phone: 96-569-794 Fax: 96-560-4685 EDS25 -Gang Start/Stop Station Cooper Crouse-Hinds Catalog Number Manufacturer Weight per unit Product Category Features Assembly/Kit
Fluorescent Lighting FE Series: Nonmetallic Fluorescent Lighting Fixtures, Standard and Emergency Battery Back-Up Increased Safety
Fluorescent Lighting FE Series: Nonmetallic Fluorescent Lighting Fixtures, Standard and Emergency Battery Back-Up Increased Safety Zone & & II GD IP66/67 IK0 Applications: Can be installed in hazardous
WFH LED SERIES L E D. High-Bay Lighting for Hazardous & Wet Locations
WFH LED SERIES W FH High-Bay Lighting for Hazardous & Wet Locations Class I, Division 2, Groups A, B, C, & D Class II, Division 2, Groups F & G Class III UL 844 Hazardous Locations UL 1598 Wet Locations
NMF 2 SERIES Non-Metallic Enclosed and Gasketed Fluorescent Lighting for Wet and Damp Locations
NMF 2 SERIES Non-Metallic Enclosed and Gasketed Fluorescent Lighting for Wet and s NEMA 4X UL 1598 Wet & s CUL IP65 NSF Enclosure N M F 2 339 NMF2 SERIES Non-Metallic Enclosed and Gasketed Fluorescent
www.greenelectricalsupply.com Page 1 of 4 The HLR SERIES hazardous location family of fixtures is suitable for use in a wide range of indoor and outdoor Class I Division 2 applications. Available in eight
4.5. Ex Floodlights for high-pressure discharge lamps, series PX 04 and FLT 10. (Zone 1, 2, 21, 22)
.5 Ex Floodlights for high-pressure discharge lamps, series PX 0 and FLT 10 (Zone 1, 2, 21, 22) The powerful floodlights for harsh environments Thanks to the high degree of protection IP66, the robust
ORDERING INFORMATION: 120 Volts (120) 208 Volts (208) 240 Volts (240) 277 Volts (277) 480 Volts (480)
Del Mar Corrosion resistant, Weather Tight Unit fabricated from spun Aluminum.080 Thick, Full Gasket Keeps out insects and Water. Lens & Removable Door Assembly: Hinged Door Assembly Formed from One Piece
EVZ Series (Small body) Explosion protected luminaire Operating Instructions
EVZ Series (Small body) Explosion protected luminaire Operating Instructions Cooper Crouse-H i n d s Cooper E l ec t ron i c T ec h n ol og i es ( S h a n g h a i ) Co., L t d. No. 955 Shengli Road, East
WELLGLASS EV.. Series - H.I.D. well glass lighting fixture. Aluminium with low content of copper. O-ring made of Nitrile Rubber (NBR)
WELLGLASS EV.. Series - H.I.D. well glass lighting fixture EV.. series well glass lighting fixtures are suitable for hazardous areas of industrial plants for lighting of indoor and outdoor structures,
EDS / EFS Series Control Stations
EDS / EFS Series Control Stations Fully Assembled EFS and EDS Factory Sealed Devices Cl. I, Div. &, Groups B*, C, D Cl. II, Div., Groups E, F, G Cl. II, Div., Groups F, G NEMA, 7B*CD, 9EFG Applications:
Fluorescent Lighting: Enclosed and Gasketed
luorescent Lighting: Enclosed and Gasketed 3-1 Page Description 2-5 V Series 2-3 eatures, Ordering Information and Accessories 4-5 Technical Data, Dimensions and Photometric Data 6-11 VRS and DRS luorescent
1E EJB Junction Boxes Cl. I, Div. 1 and 2, Groups B, C, D
Cl. I, Div. and 2, Groups B, C, D Cl. II, Div., Groups E, F, G Cl. II, Div. 2, Groups F, G Cl. III NEMA 3, 4, 4*,, Ex d IIB + H2 T, IP Explosionproof Dust-Ignitionproof Raintight Wet Locations Applications:
1000W and 2000W versions
503 FLOODLIGHT 126 600W HPS 1000W and 2000W versions The 503 is a high powered floodlight with a wide ambient temperature range. The high upper ambient and corrosion resistant aluminium constriction, make
Class 1 Division 2 Hazardous Location LED Light - Corrosion Resistant for Marine (Saltwater) - Offsh
Class 1 Division 2 Hazardous Location LED Light - Corrosion Resistant for Marine (Saltwater) - Offsh Part #: HALP-48-2L-LED Page: 1 Made in the USA The Larson Electronics HALP-48-2L-LED Hazardous Area
EWE. Cooling fins. Ex de
EWE Cooling fins - Suitable for installation with ambient temperature from -50 C to +60 C - Suitable for discharge lamps of up to 150W - Suitable for loop-in/loop-out connections - Zones 1, 2, 21, 22 4