CEC: Class I, Division 1 and 2, Groups B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Type 4X Exd IIB + H 2

Size: px
Start display at page:

Download "CEC: Class I, Division 1 and 2, Groups B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Type 4X Exd IIB + H 2"

Transcription

1 Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 75 W PSMH. 75 W MH. Medium Base. For Use with Threaded Metal Conduit. Applications For use in chemical and petrochemical plants, such as manufacturers of plastics, paints and thinners; in refineries; and in other areas where ignitable vapors, dust, moisture and corrosive elements may be present. Suitable for outdoor saltwater locations and for other wet locations. Features Fixtures operate safely in high ambient temperatures. Arrangement of heat-producing components results in efficient heat dissipation for cooler fixture operation. Patented wireless design. Threading of fixture unit onto mounting hood makes electrical connection. Only wiring required is attaching two wires to connection block in mounting hood. Connection block is easily wired: (a) loosen two screws, (b) make wire connections, and (c) re-position connection block. Safe, easy servicing without disconnecting any wiring. Wireless fixture unit threads off mounting hood for convenient servicing or for immediate replacement with a stand-by unit. Acme double-lead threads speed installation and fixture removal from mounting hood only half as many turns are required as for single-lead threads. The threads do not stick or gall, eliminating problems often encountered with single-lead threads during fixture unit removal. All threaded joints are flame-tight. Integrally ballasted HID lighting fixtures; separate ballasts not required. Factory sealed. External seals not required for Groups C and D. Fixtures for use in NEC Group B locations furnished complete with UL required sealing fitting. Not required for CEC approval. Strategic location of lamp socket, in combination with interior prism design of the glass globe, provides optimum light distribution and control. Heat and impact-resistant globes have smooth dust-resistant exterior. Superior corrosion resistance, with epoxy powder coat finish. Shock-absorbing medium-base socket mounts prolong lamp life. Porcelain socket with nickel-plated phosphor bronze screw shell. Assures long trouble-free operation in high ambient areas. Choice of mountings: pendant, ceiling, bracket and stanchion. Fiberglass-reinforced polyester reflectors, in standard dome, or 30 angle styles, are ideal in installations where luminaire is subject to exceptionally severe corrosive atmospheres. Optional guards protect globes from damage. Secured to fixture with three stainless steel screws. Variety of light sources: high pressure sodium, pulse start metal halide and metal halide. HPS is excellent where long lamp life is required. HPS provides high lumens per watt and is less expensive to operate. PSMH and MH are desirable where colors in illuminated areas must be close to natural. A wide range of ballasts and voltages are available for both domestic and export applications. Ballasts operate at low temperatures PSMH/MH: -29 C (-20 F); HPS: -40 C (-40 F). 50 W through 50 W high pressure sodium ballasts are high reactance, high power factor type. Standard Materials Ballast bodies and guards: copperfree (4/0 of % max.) aluminum Pendant mounting hoods: diecast copperfree (4/0 of % max.) aluminum Ceiling, bracket and stanchion mounting hoods: sand cast copperfree (4/0 of % max.) aluminum Reflectors: fiberglass reinforced polyester Standard Finishes Ballast bodies, guards and mounting hoods: epoxy powder coat finish, electrostatically applied for complete, uniform corrosion protection Options Fuses: order fuses for field installation by catalog number, see Ballast and Fuse Kit Data. Hot Restrike add suffix -R. Smart Starter add suffix -S. Emergency Options available for 50 W through 50 W HPS only. For CEC Exd IIB + H2 rating, add suffix -Z. For safety chain, add suffix -SC. NEC/CEC Certifications and Compliances UL Standard: UL 598, UL 844 UL Listed: E0444 CSA Standard: C22.2 No. 250, C22. 2No. 37 CSA Certified: Visit our website at or contact us at (800) September

2 Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 75 W PSMH. 75 W MH. Medium Base. For Use with Threaded Metal Conduit. +40 C (+04 F) +55 C (+3 F) +65 C (+49 F) +40 C (+04 F) Lamp Watts Ballast Type Ambient Temp. T Numbers Supply Wire Temp C ( F) Ambient Temp. T Numbers Supply Wire Temp C ( F) Ambient Temp. T Numbers Supply Wire Temp C ( F) Ambient Temp. T Numbers Supply Wire Temp C ( F) High Pressure Sodium Medium Base Lamps 50 MT, TT T6 75 (67) T5 75 (67) T4A 75 (67) T4 75 (67) 70 MT, TT, 480 V T5 75 (67) T4A 75 (67) T4A 75 (67) T4 90 (94) 00 MT, TT, 480 V T4A 75 (67) T4 90 (94) T3B 90 (94) 50 MT, TT, 480 V T3C 75 (67) Pulse Start Metal Halide Medium Base Lamps 75 MT, TT, 480 V T3B 90 (94) Metal Halide Medium Base Lamps 75 MT, TT, 480 V T3B 85 (85) T Numbers Represent the Maximum Surface Temperature for Class I, Division Locations and Maximum Surface Temperature Under Dust Blanket for Class II, Division Locations. T Number T T2 T2A T2B T2C T2D T3 T3A T3B T3C T4 T4A T5 T6 Temp. Range ( C) Temp. Range ( F) Fixture and Accessory Weights kg (lb) Fixture Size Fixture Weight Reflector Weight Guard Weight 50 W thru 75 W (28-32).36 (3) 0.45 () Mounting Hood Weights kgs (lbs) Pendant Ceiling Bracket Stanchion 0.9 (2).8 (4) 2.72 (6) 0.9 (2) NOTE: The maximum operating temperature of the fixture must not exceed the ignition temperature of the gas, vapor or dust to be encountered per the National Electrical Code and the Canadian Electrical Code. MT is Multi-Tap for 20/208/240/277 V, TT is Tri-Tap for 20/277/347 V. Class I, Division Locations. Class II, Division Locations. 364 Visit our website at or contact us at (800) September 207

3 Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 75 W PSMH. 75 W MH. Medium Base. For Use with Threaded Metal Conduit. Type Mounting Pendant - One Hub, Rigid or Flexible Mounting Lamp Watts ANSI Lamp Type Catalog Number➌ HPS PSMH Hub Size (Inches) HPS➋ PSMH 50 S68 CJLPB Stanchion - One Hub 70 S62 CJLPB S54 CJLPB S55 CJLPB M52 CJPPB S68 -/2 CJLSB S62 -/2 CJLSB S54 -/2 CJLSB S55 -/2 CJLSB M52 -/2 CJPSB750 Mounting Hoods Type Mounting Hub Size (Inches) Catalog Number Pendant One Hub CAP-75B 25 Stanchion One Hub -/2 CAS-50B Add suffix -R for Hot Restrike and -S for Smart Starter options. To order fixture with guard, add suffix -G (before adding voltage suffix). Add voltage -MT for 20/208/240/277 V. For 480 V, contact your sales representative. Add voltage suffix -MT for 20/208/240/277 V, or -48 for 480 V. Contact your sales representative for available 50 Hz ballasts. Refer to lamp manufacturer s data regarding lamp burning position restrictions. Visit our website at or contact us at (800) September

4 Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 75 W PSMH. 75 W MH. Medium Base. For Use with Threaded Metal Conduit. Class I, Division and 2, Groups C, D Class I, Division and 2, Groups B, C, D Lamp ANSI Lamp Type Hub Size Catalog Number Watts HPS PSMH/MH (Inches) HPS PSMH MH Pendant One Hub, Rigid or Flexible Mounting CJLP5075MT CJLP5075TTCN 50 S68 M0 CJLP500MT CJLP500TTCN CJLP7075MT CJLP7075TTCN 70 S62 M98 CJLP700MT CJLP700TTCN CJLP075MT CJLP075TTCN 00 S54 M90 CJLP00MT CJLP00TTCN CJLP575MT CJLP575TTCN 50 S55 CJLP50MT CJLP50TTCN CJPP775MT CJHP775MTCN CJPP775TTCN CJHP775TTCN 75 M52 CJPP70MT CJHP70MTCN CJPP70TTCN CJHP70TTCN Ceiling Four Hubs, Three Close-Up Plugs CJLC5075MT CJLC5075TTCN 50 S68 M0 CJLC500MT CJLC500TTCN CJLC7075MT CJLC7075TTCN 70 S62 M98 CJLC700MT CJLC700TTCN CJLC075MT CJLC075TTCN 00 S54 M90 CJLC00MT CJLC00TTCN CJLC575MT CJLC575TTCN 50 S55 CJLC50MT CJLC50TTCN CJPC775MT CJHC775MTCN CJPC775TTCN CJHC775TTCN 75 M52 CJPC70MT CJHC70MTCN CJPC70TTCN CJHC70TTCN Add suffix -R for Hot Restrike and -S for Smart Starter options. To order fixture with guard, add suffix -G before adding voltage suffix. For 480 V, contact your sales representative. Change voltage suffix -MT to -48 for 480 V. Change voltage suffix -TT (20/277/347 V) to -MT for 20/208/240/277 V, -C2 for 208 V, -C3 for 240 V, -C6 for 480 V, or -C7 for 600 V. These voltage suffixes have CSA Certification only. Refer to lamp manufacturer s data regarding lamp burning position restrictions. Fixtures with hubs listed for Class I, Group D, and Class II, Groups E, F, G only. Catalog numbers with -CN suffix have CSA Certification only. Shaded area indicates items suitable for Class I, Division, Group B. 366 Visit our website at or contact us at (800) September 207

5 Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 75 W PSMH. 75 W MH. Medium Base. For Use with Threaded Metal Conduit. Class I, Division and 2, Groups C, D Class I, Division and 2, Groups B, C, D Lamp ANSI Lamp Type Hub Size Catalog Number Watts HPS PSMH/MH (Inches) HPS PSMH MH Bracket Four Hubs, Three Close-Up Plugs CJLB5075MT CJLB5075TTCN 50 S68 M0 CJLB500MT CJLB500TTCN CJLB7075MT CJLB7075TTCN 70 S62 M98 CJLB700MT CJLB700TTCN CJLB075MT CJLB075TTCN 00 S54 M90 CJLB00MT CJLB00TTCN CJLB575MT CJLB575TTCN 50 S55 CJLB50MT CJLB50TTCN CJPB775MT CJHB775MTCN CJPB775TTCN CJHB775TTCN 75 M52 CJPB70MT CJHB70MTCN CJPB70TTCN CJHB70TTCN 25 Stanchion One Hub 50 S68 M0 -/4 or -/2 CJLS5050MT CJLS5050TTCN 70 S62 M98 -/4 or -/2 CJLS7050MT CJLS7050TTCN 00 S54 M90 -/4 or -/2 CJLS050MT CJLS050TTCN 50 S55 -/4 or -/2 CJLS550MT CJLS550TTCN 75 M52 -/4 or -/2 CJPS750MT CJHS750MTCN CJPS750TTCN CJHS750TTCN Add suffix -R for Hot Restrike and -S for Smart Starter options. To order fixture with guard, add suffix -G before adding voltage suffix. For 480 V, contact your sales representative. Change voltage suffix -MT to -48 for 480 V. Change voltage suffix -TT (20/277/347 V) to -MT for 20/208/240/277 V, -C2 for 208 V, -C3 for 240 V, -C6 for 480 V, or -C7 for 600 V. These voltage suffixes have CSA Certification only. Refer to lamp manufacturer s data regarding lamp burning position restrictions. Fixtures with hubs listed for Class I, Group D, and Class II, Groups E, F, G only. -/2" tapped hub furnished with -/2" to -/4" reducer. Catalog numbers with -CN suffix have CSA Certification only. Shaded area indicates items suitable for Class I, Division, Group B. Visit our website at or contact us at (800) September

6 Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 75 W PSMH. 75 W MH. Medium Base. For Use with Threaded Metal Conduit. Class I, Division and 2, Groups B,C, D Class I, Division and 2, Groups B, C, D Mounting Hoods Pendant One Hub Ceiling Four Hubs, Three Close-Up Plugs Bracket Four Hubs, Three Close-Up Plugs 25 Stanchion One Hub Hub Size (Inches) Catalog Number CAP-75 CAP-00 CAC-75 CAC-00 CALB-75 CALB-00 -/4 or -/2 CAS-50 Mounting Adapter with Connection Block Permits use of existing A-5 mounting hoods (AAC Ceiling or AALB Bracket) with the new Code Master 2 Fixture Unit. After removing existing fixture unit and adapter, screw in the new CMAD- Adapter. Then thread new fixture unit into the CMAD-. CMAD- Fixture Units Ballast body with globe. Indicate voltage desired by adding voltage suffix to fixture unit catalog number listed below. Type High Pressure Sodium High Power Factor (Min. P.F. 90%) Pulse Start Metal Halide Constant Wattage (Min. P.F. 90%) Metal Halide Constant Wattage (Min. P.F. 90%) Lamp Watts Fixture Unit Number Add Voltage Suffixes 20/208/240/277 20/277/ V 50 CJB50L- MT TTCN 70 CJB70L- MT TTCN CJB00L- MT TTCN CJB50L- MT TTCN CJB75P- MT TTCN CJB75H- MT TT C6 -/2 Tapped hub furnished with -/2 to -/4 reducer. Mounting Hoods with hub listed for Class I, Group D; Class II, Groups E,F,G; and only. Add suffix -R for Hot Restrike and -S for Smart Starter options. Change voltage suffix -TTCN to -MTCN for 20/208/240/277 V, -C2 for 208 V, -C3 for 240 V, -C6 for 480 V, or -C7 for 600 V. These voltage suffixes have CSA Certification only. Shaded area indicates items suitable for Class I, Division, Group B. 368 Visit our website at or contact us at (800) September 207

7 Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 75 W PSMH. 75 W MH. Medium Base. For Use with Threaded Metal Conduit. Polyester Reflectors Description Catalog Number Standard Dome KR2-ST 30 Angle KR2-AN Standard Dome 30 Angle Three-Way Exit Sign Epoxy enameled steel 6 -high red lettering Mounts to Code Master Jr. fixture units in place of guard. Single Sided Exit Sign Epoxy enameled steel 6 -high red lettering Mounts to Code Master Jr. fixture units in place of guard. *Contact your sales representative regarding hazardous location suitability. Prismatic Glass Globe and Ring Assembly 50 W through 75 W CJEXRN AEXR-5R CJGL-75 Aluminum Guards 50 W through 75 W CJGU-5 Replacement Sockets 50 W through 75 W Medium base sockets CJMS-75 Connection Block 50 W through 75 W For all Code Master fixtures VPT-7 HPS Hot Restrike Restrikes HPS lamp immediately when power is restored after a momentary power interruption. Optional for fixture watts of 50, 70, 00 or 50 (HPS only) Add suffix -R Smart Starter Smart Starter is for HPS fixtures only. Incorporates a -/2-minute timer and performs as a conventional starter to normally start lamp. Removes itself from circuit if lamp burns out or is removed from socket. Eliminates starter failures caused by prolonged operation with cycling or failing lamps and simplifies finding their location which reduces maintenance and repair costs. Optional for all HPS and PSMH fixtures. Add suffix -S Visit our website at or contact us at (800) September

8 Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 75 W PSMH. 75 W MH. Medium Base. For Use with Threaded Metal Conduit. Lamp High Pressure Sodium HX-H.P.F. Ballast Amps Pulse Start Metal Halide HX-H.P.F. Super CWA Watts Volts Start Operating Start Operating Fuse Quantity Required Fuse Kit Catalog Number HPS PSMH MH CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF CF-5 CF CF-3 CF CF-3 CF CF-2 CF CF-2 CF CF-3 CF-2 Fuse Kit includes fuse, fuse holder and necessary hardware for field installation. Mounts easily in ballast body with one screw. Order one fuse for 20 V and 277 V, and 2 fuses for 208, 240 and 480 V. CF-2 = 2 Amp; CF-3 = 3 Amp; CF-5 = 5 Amp; CF-8 = 8 Amp; CF-0 = 0 Amp 35 W through 50 W HPS have H.P.F. High Reactance ballasts. 75 W PSMH 480 volts has CWA ballast. Multi-tap has CWA ballast. 347 V lamp has CSA Certification only. 370 Visit our website at or contact us at (800) September 207

9 Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 75 W PSMH. 75 W MH. Medium Base. For Use with Threaded Metal Conduit. Dimensions in Millimeters (Inches) Pendant Ceiling Bracket 6.3 mm (4.58" ) Ø mm (7.22") mm (7.87") Hub for " or " NPT Conduit mm (8.00") 95.3 mm (3.75") 88.0 mm (7.40") mm (4.2") 0.6 mm (4.00") mm (8.2") mm (7.47").390º Slot Four Places Hub for " or " NPT Conduit Four Sides 0.6 mm (4.00") 50.4 mm (5.92") 45º 4.3 mm (4.50") Ø 23.9 mm (0.94") 0.6 mm (4.00") 88.0 mm (7.40") mm (4.2") 25.0 mm 2 (4.92" 2 ) 99.6 mm (3.92") 0.4 mm 0.4" Ø Four Holes 62.5 mm (2.46") 57.9 mm (2.28") 3.2 mm (.23") Hub for " or " NPT Conduit Four Sides 88.0 mm (7.40") 87.9 mm (3.46") 292. mm (.5") mm (3.75") 50.8 mm (2.00") Ø Wiring Access Cover Both Sides mm (5.62") 42.8 mm (6.25") 08.0 mm (4.25") 45.5 mm (.79") mm (6.00") mm (8.00") 25 Stanchion Exit Signs Reflectors 60.5 mm 2.38" Ø 24.3 mm (9.50") 54.9 mm (6.0") 60.5 mm (4.50") Ø 74.8 mm (6.88") 25.9 mm (8.50") mm (.75") 69.9 mm (2.75") mm (4.9") mm (8.00") mm (0.7").5 - NPT 25º 25º mm (6.00") mm (6.88") mm (9.25") mm (2.00") AEXR-5R mm (3.00") 52.4 mm (6.00") 30 Angle mm (8.00") mm (6.9") CJEXRN Standard Dome 42.8 mm (6.25") Visit our website at or contact us at (800) September

10 * Photometric data is based on a fixture with a 50-watt clear High Pressure Sodium lamp (6,000 lumen), without guard. For candlepower values of fixtures with other HPS lamps, use the following multipliers: for a 00 W (9,500 lumen) HPS lamp 0.594; for a 70 W (6,400 lumen) HPS lamp 0.394; for a 70 W (5800 lumen) HPS lamp 0.363; for a 50 W (4,000 lumen) HPS lamp 0.25; for a 35 W (2,250 lumen) HPS lamp 0.4. For candlepower values of fixture with guard, multiply by HPS Photometric Data Zone Lumens Total Luminaire Efficiency = 77.5% CIE Type - General Diffuse REPORT NUMBER: CJL5G Lamps: 50 W High Pressure Sodium lamp with Globe only * Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance % Ceiling Rcc % Walls Rw Zonal Lumen Summary Zone Lumens % Lamp % Fixture Zone Lumens Total Luminaire Efficiency = 66.9% REPORT NUMBER: CJL5ST CIE Type - Direct Lamps: 50 W High Pressure Sodium lamp with Spacing Standard Dome Reflector Plane Criteria Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance Diagonal.80 % Ceiling Rcc % Walls Rw Zonal Lumen Summary Zone Lumens % Lamp % Fixture Zone Lumens Total Luminaire Efficiency = 6.8% REPORT NUMBER: CJL5AN CIE Type - Direct Lamps: 50 W High Pressure Sodium lamp with Spacing 30 Angle Dome Reflector Plane Criteria Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance Diagonal.54 % Ceiling Rcc % Walls Rw Zonal Lumen Summary Zone Lumens % Lamp % Fixture Visit our website at or contact us at (800) September 207

11 * Photometric data is based on a fixture with a 75-watt clear Pulse Start Metal Halide lamp (4,000 lumen), without guard. For candlepower values of fixtures with other PSMH lamps, use the following multipliers: for a 00 W (8,500 lumen) PSMH lamp 0.607; for a 70 W (5,000 lumen) PSMH lamp For candlepower values of fixture with guard, multiply by PSMH Photometric Data Zone Lumens Total Luminaire Efficiency = 77.8% CIE Type - General Diffuse REPORT NUMBER: CJP7G Lamps: 75 W Pulse Start Metal Halide with Globe only * Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance % Ceiling Rcc % Walls Rw Zonal Lumen Summary Zone Lumens % Lamp % Fixture Zone Lumens Total Luminaire Efficiency = 66.4% REPORT NUMBER: CJP7ST CIE Type - Direct Lamps: 75 W Pulse Start Metal Halide with Spacing Standard Dome Reflector * Plane Criteria Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance Diagonal.76 % Ceiling Rcc % Walls Rw Zonal Lumen Summary Zone Lumens % Lamp % Fixture Zone Lumens Total Luminaire Efficiency = 63.2% REPORT NUMBER: CJP7AN CIE Type - Direct Lamps: 75 W Pulse Start Metal Halide with Spacing 30 Angle Dome Reflector * Plane Criteria Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance Diagonal.62 % Ceiling Rcc % Walls Rw Zonal Lumen Summary Zone Lumens % Lamp % Fixture Visit our website at or contact us at (800) September

Lighting: Explosionproof Area HID. Applications. Standard Materials

Lighting: Explosionproof Area HID. Applications. Standard Materials Code Master Jr. HID Factory Sealed Luminaires Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 50 W, 70 W, 00 W, 75 W PSMH. 75 W MH V. Medium Base. For Use with Threaded Metal Conduit. Class I, Division

More information

Applications. Standard Materials

Applications. Standard Materials Code Master Jr. HID Factory Sealed Luminaires Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 50 W, 70 W, 00 W, 75 W PSMH. 75 W MH V. Medium Base. For Use with Threaded Metal Conduit. Class I, Division

More information

Applications. Standard Materials. Certifications and Compliances

Applications. Standard Materials. Certifications and Compliances Code Master 2 HID Factory Sealed Luminaires Class I, Division 1 and 2, Groups C, D Class I, Division 1 and 2, Groups B, C, D Applications Ideal for use in chemical and petrochemical plants, such as manufacturers

More information

HID/AREA: NEC/CEC EXPLOSIONPROOF. Applications. NEC/CEC Certifications and Compliances

HID/AREA: NEC/CEC EXPLOSIONPROOF. Applications. NEC/CEC Certifications and Compliances Integrally Ballasted. 50 W, 70 W, 100 W, 150 W, 250 W, 400 W HPS; 175 W, 250 W, 320 W, 350 W, 400 W PSMH; 175 W, 250 W, 400 W MH. Applications Ideal for use in chemical and petrochemical plants, such as

More information

Applications. Standard Materials. Certifications and Compliances

Applications. Standard Materials. Certifications and Compliances Code Master 2 HID Factory Sealed Luminaires NEC: Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Marine Type Electric Fixtures Outside Type (Salt Water) Class I, Division

More information

Code Master Incandescent Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof For use with threaded metal conduit.

Code Master Incandescent Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof For use with threaded metal conduit. Applications For use in hazardous locations such as plants where plastics, paints, thinners and petrochemicals are manufactured. For use in chemical and petrochemical plants, such as manufacturers of plastics,

More information

G1-1. HID Lighting Fixtures: Explosionproof, Dust-Ignitionproof. Page Description

G1-1. HID Lighting Fixtures: Explosionproof, Dust-Ignitionproof. Page Description HID Lighting Fixtures: Explosionproof, Dust-Ignitionproof 1-1 Code Master 2 with Polyester Reflector Code Master Jr. without Reflector Code Master 2 Floodlight A-51 roup A & B with Porcelain Reflector

More information

Code Master 2 Factory Sealed Induction Lighting System Explosionproof

Code Master 2 Factory Sealed Induction Lighting System Explosionproof Lighting Induction Code Master 2 Factory Sealed Induction Lighting System NEC/CEC: Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Marine Type Electric Fixtures Outside

More information

Code Master 2 Factory Sealed Induction Lighting System Explosionproof

Code Master 2 Factory Sealed Induction Lighting System Explosionproof Code Master 2 Factory Sealed Induction Lighting System Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Marine Type Electric Fixtures Outside Type (Salt Water) NEMA 4X

More information

HID/FLOODLIGHT: NEC/CEC EXPLOSIONPROOF. Applications. Options

HID/FLOODLIGHT: NEC/CEC EXPLOSIONPROOF. Applications. Options Applications UL Listed for Outside Type (Salt Water). Ideal in Class I, Division 1 and 2 installations in refineries, in pipeline transportation facilities, at drilling rigs and in production facilities

More information

LIGHTING: EXPLOSIONPROOF FLOODLIGHT. Applications. Options

LIGHTING: EXPLOSIONPROOF FLOODLIGHT. Applications. Options Code Master 2 HID Factory Sealed Floodlights NEC: Class 1, Division 1 and 2, Groups C, D Marine Type Electric Fixtures Outside Type (Salt Water) CEC: V Class I, Division 1 and 2, Groups B, C, D Class II,

More information

CEC: Class I, Division 1 and 2, Groups B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Type 4X Exd IIB + H 2 3/4 CAP-75 1 CAP-100

CEC: Class I, Division 1 and 2, Groups B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Type 4X Exd IIB + H 2 3/4 CAP-75 1 CAP-100 Code Master Jr. HID Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof Integrally Ballasted. 50 W, 70 W, 100 W, 150 W HPS; 50 W, 70 W, 100 W, 175 W PSMH. 175 W MH. Medium Base. For Use with Threaded

More information

Applications. Straight Stanchion-Mount Fixture with Prismatic Glass Refractor and Guard. Pendant Mount Fixture with Prismatic Glass Refractor

Applications. Straight Stanchion-Mount Fixture with Prismatic Glass Refractor and Guard. Pendant Mount Fixture with Prismatic Glass Refractor Mercmaster III HID 50-250 Watt Luminaires Applications Enclosed and gasketed fixtures suitable for use in: Marine and wet locations A wide range of industrial, chemical processing and other areas where

More information

Mercmaster II HID Luminaires High Pressure Sodium and Pulse Start Metal Halide. Mogul Base UNILETS for Use with Threaded Metal Conduit.

Mercmaster II HID Luminaires High Pressure Sodium and Pulse Start Metal Halide. Mogul Base UNILETS for Use with Threaded Metal Conduit. UNILETS for Use with Threaded Metal Conduit. Applications Enclosed and gasketed HID lighting fixtures for use in tunnels, walkways, bridges, storage facilities, processing plants, parking lots, foundries,

More information

G1-24. Applications UL listed for marine type electric fixtures--outside. Ideal in Class I, Div. 1 and 2 installations

G1-24. Applications UL listed for marine type electric fixtures--outside. Ideal in Class I, Div. 1 and 2 installations 1-24 Applications UL listed for marine type electric fixtures--outside type (salt water). Ideal in Class I, Div. 1 and 2 installations in refineries, pipeline transportation facilities; at drilling rigs

More information

SXPJ SERIES S X. HID & Compact Fluorescent Lighting for Hazardous and Hostile Locations

SXPJ SERIES S X. HID & Compact Fluorescent Lighting for Hazardous and Hostile Locations SXPJ SERIES HID & Compact Fluorescent Lighting for Hazardous and Hostile Locations S X PJ Class I, Division 1, Group C & D Class II, Division 1, Groups E, F & G Class III Zone 1, Groups IIA & IIB Factory

More information

Mercmaster LED Series Luminaires Enclosed and Gasketed Fixtures

Mercmaster LED Series Luminaires Enclosed and Gasketed Fixtures Mercmaster Series Luminaires LIGHTING: ENCLOSED AND GASKETED AREA /INDUCTION Applications Enclosed and gasketed fixtures suitable for use in: Marine and wet locations A wide range of industrial, chemical

More information

4L EVM Hazard Gard H.I.D. Luminaires Mogul Base Factory Sealed (Groups C.D)

4L EVM Hazard Gard H.I.D. Luminaires Mogul Base Factory Sealed (Groups C.D) 4L EVM Hazard Gard H.I.D. Luminaires Mogul Base Factory Sealed (Groups C.D) Cl. I, Div. 1 Groups B (GB suffix),c,d (with suffix GB), IIB IIA Paint Spray (100W max) Application: Hazard Gard luminaires are

More information

SXPJ SERIES S X azz.com/rigalite

SXPJ SERIES S X azz.com/rigalite SXPJ SERIES HID Lighting & Compact for Explosion Fluorescent Proof, Lighting Hazardous for and Hazardous Hostile Locations and Hostile Locations S X PJ Class I, Division 1, Group C & D Class II, Division

More information

Areamaster 1000 Floodlights Integrally Ballasted W HID For hazardous locations.

Areamaster 1000 Floodlights Integrally Ballasted W HID For hazardous locations. A, IIB, IIC Applications Powerful, efficient weatherproof lighting for large areas such as: Pulp and paper mills Processing plants Chemical plants Oil refineries Foundries Storage areas Waste and sewage

More information

Applications. Illustrated Features

Applications. Illustrated Features Applications For use in locations where a high degree of corrosion resistance is required. FR Series: For use in areas where high humidity or water vapor are present Typical uses include meat- or food-processing

More information

FV Series Nonmetallic Fluorescent Luminaires For Hazardous and Adverse Locations

FV Series Nonmetallic Fluorescent Luminaires For Hazardous and Adverse Locations Applications For use in hazardous locations defined by the NEC and CEC as Class I, Division 2, Groups A, B, C and D; Class II, Division 2, Groups F and G; Marine Outdoor Salt Water; UL1598A and. As well

More information

Mercmaster LED Series Luminaires Enclosed and Gasketed Fixtures

Mercmaster LED Series Luminaires Enclosed and Gasketed Fixtures ATEX/IECEx: Zone 2 and 22 II 2 GD Lighting LIGHTING: ENCLOSED AND GASKETED AREA LED/INDUCTION Applications Enclosed and gasketed fixtures suitable for use in: Marine and wet locations A wide range of industrial,

More information

N2MV Series W Non-metallic

N2MV Series W Non-metallic N2MV Series 50-175W Non-metallic Cl. I, Div. 2, Groups A, B, C, D Cl. II, Groups F, G Cl. III & Simultaneous Presence (100W max) Marine & Wet Locations, R, 4, 4X; IP56 L Applications: N2MV series Champ

More information

Areamaster 100 Wide-Beam Floodlights 70 W, 100 W, 150 W HPS; 70 W, 100 W, 150 PSMH For general, marine and hazardous locations.

Areamaster 100 Wide-Beam Floodlights 70 W, 100 W, 150 W HPS; 70 W, 100 W, 150 PSMH For general, marine and hazardous locations. Areamaster 100 Wide-Beam Floodlights NEC CEC V Class II, Divisions I and 2, Groups E, F, G V Class III Applications Highly efficient, all-weather flood-lighting for lower wattage service. Well suited for:

More information

Areamaster LED Flood/High Bay Luminaires

Areamaster LED Flood/High Bay Luminaires Applications Typical applications include: Pulp and paper mills Processing plants Chemical plants Oil refineries Foundries Storage areas Waste and sewage treatment Parking garages Other areas where dust,

More information

SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent

SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent S A F Class I, Division 2, Groups A, B, C & D Class II, Division 1 & 2, Groups E, F & G Class III Zone 2, Groups IIA, IIB & IIC UL 844

More information

F1-1. HID Lighting: Enclosed and Gasketed. Description. 2, 3 Mercmaster III Family Tree Mercmaster III HID Low Profile Lighting Fixtures

F1-1. HID Lighting: Enclosed and Gasketed. Description. 2, 3 Mercmaster III Family Tree Mercmaster III HID Low Profile Lighting Fixtures HID Lighting: Enclosed and Gasketed 1-1 Page Description 2, 3 Mercmaster III amily Tree 2-22 Mercmaster III HID Low Profile Lighting ixtures 23-54 Mercmaster III HID 50-250W Lighting ixtures Mercmaster

More information

MHD2/MHDO SERIES MHD2. Marine Heavy Duty Outdoor Non-Metallic Fluorescent CLASS 1 DIVISION 2 FLUORESCENT LIGHT

MHD2/MHDO SERIES MHD2. Marine Heavy Duty Outdoor Non-Metallic Fluorescent CLASS 1 DIVISION 2 FLUORESCENT LIGHT MHD2/MHDO SERIES Marine Heavy Duty Outdoor Non-Metallic Fluorescent Non-metallic, glass reinforced polyester housing. 3/4 in. NPT aluminum hub. Captive stainless steel latches. Stainless steel mounting

More information

DMV Series W For Combustible Dusts

DMV Series W For Combustible Dusts L DMV Series 50-250W For Combustible Dusts Champ H.I.D. Luminaires Cl. I, Div. 2, Groups A, B, C, D Restricted Breathing Cl. I, Div. 2 & Zone 2 (Suffix S826) Certified for IEC Zone 2 (Suffix S826TB) Cl.

More information

SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent

SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent S A F Class I, Division 2, Groups A, B, C & D Class II, Division 1 & 2, Groups E, F & G Class III Zone 2, Groups IIA, IIB & IIC UL 844

More information

MHD2/MHDO SERIES M H D 2. Marine Heavy Duty Non-Metallic Fluorescent

MHD2/MHDO SERIES M H D 2. Marine Heavy Duty Non-Metallic Fluorescent MHD2/MHDO SERIES Marine Heavy Duty Non-Metallic Fluorescent Class I, Division 2, Groups A, B, C & D Class II, Division 2, Groups F & G Class III Zone 2, Groups IIA, IIB & IIC UL 844 Hazardous Locations

More information

SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent

SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent S A F Class I, Division 2, Groups A, B, C & D Class II, Division 1 & 2, Groups E, F & G Class III Zone 2, Groups IIA, IIB & IIC UL 844

More information

Areamaster LED Flood/High Bay Luminaires For Hazardous Locations. 250 W, 400 W, 750 W, 1000 W HID Light Level Equivalent

Areamaster LED Flood/High Bay Luminaires For Hazardous Locations. 250 W, 400 W, 750 W, 1000 W HID Light Level Equivalent Class I, Division 2, Groups A, B, C, D Class I, Zone 2 Group IIC Class II, Division 1, Groups E, F, G Class II Division 2, Groups F, G Class III Simultaneous Exposure Type 3R, 4, 4X IP66/67 Applications

More information

MHDS SERIES M H D S. Stainless Steel Marine Heavy Duty Luminaire for Hazardous Locations

MHDS SERIES M H D S. Stainless Steel Marine Heavy Duty Luminaire for Hazardous Locations MHDS SERIES Stainless Steel Marine Heavy Duty Luminaire for Hazardous Locations Class I, Division 2, Groups A, B, C & D Class II, Division 2, Groups F & G Class III UL 844 Hazardous Locations UL 198A Marine

More information

SAFR LED SERIES S A F R L E D. Hazardous Location LED Luminaire

SAFR LED SERIES S A F R L E D. Hazardous Location LED Luminaire SAFR LED SERIES Hazardous Location LED Luminaire Class I, Division 2, Groups A, B, C & D Class II, Division & 2, Groups E, F & G Class III Class I, Zone 2, Groups IIA, IIB & IIC UL 8750 LED Safety UL 844

More information

Industrial Areamaster LED Flood/High Bay Luminaires For Ordinary Locations. 250 W, 400 W, 750 W HID Light Level Equivalent

Industrial Areamaster LED Flood/High Bay Luminaires For Ordinary Locations. 250 W, 400 W, 750 W HID Light Level Equivalent NEC/CEC: Type 3R, 4X IP66, IP67 Suitable for use in Wet Locations Marine Outside Type (Salt Water) Applications Powerful, efficient weatherproof lighting for applications such as: Security lighting Production

More information

MAR SERIES Fluorescent Lighting for Hazardous Locations

MAR SERIES Fluorescent Lighting for Hazardous Locations MAR SERIES M AR Fluorescent Lighting for Hazardous Locations Class I, Division 2, Groups A, B, C, & D Seismic Tested UL 844 Hazardous Locations UL 924 Emergency Lighting UL 1598A Marine Outside Type CSA

More information

Standard Grade 14 Inch Reflector. Ordering Information

Standard Grade 14 Inch Reflector. Ordering Information Job Type Dimensions Specifications B A NRTL/C C Damp Location D E Slick- On Quick- On F A B C D E F 9-1/2" 2" 9-1/2" 20-22/32 24-27/32" 9-7/16" 14-1/4" 241 mm 51 mm 241 mm 536-631 mm 240 mm 362 mm 9-1/2"

More information

WFH LED SERIES L E D. High-Bay Lighting for Hazardous & Wet Locations

WFH LED SERIES L E D. High-Bay Lighting for Hazardous & Wet Locations WFH LED SERIES W FH High-Bay Lighting for Hazardous & Wet Locations Class I, Division 2, Groups A, B, C, & D Class II, Division 2, Groups F & G Class III UL 844 Hazardous Locations UL 1598 Wet Locations

More information

N2LED Series Emergency Luminaires Non-Metallic Emergency Egress Lighting Systems with Remote or Direct Mounted Lamps.

N2LED Series Emergency Luminaires Non-Metallic Emergency Egress Lighting Systems with Remote or Direct Mounted Lamps. Applications Enclosed and gasketed, non-metallic emergency lighting system suitable for use in areas where flammable gases or vapors may become present due to abnormal, unusual or accidental conditions

More information

PGL350P W PS Wallpack

PGL350P W PS Wallpack 3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 PGL350P1281 350W PS Wallpack Hubbell Lighting, Inc. Catalog Number Manufacturer Description Weight per unit Product Category

More information

Fluorescent Lighting: Enclosed and Gasketed

Fluorescent Lighting: Enclosed and Gasketed luorescent Lighting: Enclosed and Gasketed 3-1 Page Description 2-5 V Series 2-3 eatures, Ordering Information and Accessories 4-5 Technical Data, Dimensions and Photometric Data 6-11 VRS and DRS luorescent

More information

KH Series Kemlux III Enclosed/Gasketed

KH Series Kemlux III Enclosed/Gasketed For use in corrosive, harsh, hazardous applications such as chemical, petrochem, marine, power generation, pharmaceutical, or food processing plants Mogul base socket on tanks C, D & E Medium base socket

More information

INCANDESCENT/COMPACT FLUORESCENT/MEDIUM BASE HID

INCANDESCENT/COMPACT FLUORESCENT/MEDIUM BASE HID KILLARK INCANDESCENT/COMPACT FLUORESCENT/MEDIUM BASE HID Class I, Div. 1 & 2, Groups C,D Class I, Zones 1 & 2, Groups llb, lla Class II, Div. 1 & 2, Groups E,F,G Class III, Div. 1 & 2 Suitable for wet

More information

SAFJ LED SERIES S A L E D. Hazardous Location Compact LED

SAFJ LED SERIES S A L E D. Hazardous Location Compact LED SAFJ LED SERIES Hazardous Location Compact LED Class I, Division 2, Groups A, B, C, & D Class II, Division 1 & 2, Groups E & F Class III Simultaneous Presence Enclosed & Gasketed Wet Locations NEMA 3R,

More information

Post Top Globes. ACL Large Acorn Post Top Globe Page 109. ACS Small Acorn Post Top Globe Page 109

Post Top Globes. ACL Large Acorn Post Top Globe Page 109. ACS Small Acorn Post Top Globe Page 109 s s ACS Small Acorn 109 ACL Large Acorn 109 AC3, AC5 Large Type 3 or 5 Acorn 109 BKS Small Buckeye 111 BKL Large Buckeye 111 BK3, BK5 Large Type 3 or 5 Buckeye 111 Small Chestnut 113 Large Chestnut 113

More information

Form 85 Unilets Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit.

Form 85 Unilets Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit. For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit. NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing.

More information

WFHN LED SERIES W F H N L E D. High-Bay Lighting for Heavy Hose-Down Environments

WFHN LED SERIES W F H N L E D. High-Bay Lighting for Heavy Hose-Down Environments WFHN LED SERIES High-Bay Lighting for Heavy Hose-Down Environments UL 1589 Wet Locations UL 8750 LED Safety NEMA 4X CUL Listed NSF Certified Food Equipment High Pressure Hose-Down One Piece Welded Aluminum

More information

AFL FLOODLIGHT SERIES

AFL FLOODLIGHT SERIES AFL FLOODLIGHT SERIES A FL Flood Lighting for Hazardous Locations Class I, Division 2, Groups A, B, C & D UL 844 Hazardous Locations UL 598A Marine Outside Type Zone 2, Groups IIA, IIB & IIC CUL Cast Aluminum

More information

TORNADOTM BOLLARD PATENTS PENDING

TORNADOTM BOLLARD PATENTS PENDING TORNADOTM BOLLARD PATENTS PENDING Day Tornado Bollard Unlike any bollard available in today s specification pallet, Tornado offers a new form and character for pedestrian scale lighting. Tornado adds an

More information

MOGUL BASE HID FIXTURES

MOGUL BASE HID FIXTURES KILLARK Z A H LO C MOGUL BASE HID FIXTURES Class I, Div. 1 & 2 Groups C,D Class l, Zone 1 & 2, Groups llb,lla Class l, Zone 1, AEx d IIB Class II, Div. 1 & 2, Groups Class III, Div. 1 & 2 Suitable for

More information

Standard Grade 23 Inch Reflector/Refractor. Ordering Information. series wattage source voltage optics color options options BL-LB1

Standard Grade 23 Inch Reflector/Refractor. Ordering Information. series wattage source voltage optics color options options BL-LB1 Job Type Dimensions Specifications B A C NRTL/C Damp Location D Slick-On Quick-On E A B C D E 9-1/2" 2" 9-1/2" 26-11/16" 23-1/8" 241 mm 51 mm 241 mm 678 mm 587 mm 9-1/2" 1-1/8" 8-5/8" 25-13/16" 23-1/8"

More information

Perimaliter Wallpacks

Perimaliter Wallpacks ENERGY SAVING Outdoor Lighting Perimaliter Wallpacks Perimaliter III PVL3 / PGM3 Perimaliter II PGL Solutions for Perimeter/Area Lighting Perimaliter Wallpacks The Perimaliter wallpack has been the design

More information

Champ Fixtures. Class I, Division 2 Class I, Zone 2. Floodlight

Champ Fixtures. Class I, Division 2 Class I, Zone 2. Floodlight Champ Fixtures Class I, Division Class I, Zone Floodlight Champ Floodlight Fixtures Whenever Cooper Crouse-Hinds develops a new product, system, or procedure, we focus on one overriding question: Will

More information

1000 Watt Metal Halide Light - Class 1 Division 2 Groups A-D - T3b Temperature - 110,000 lumens

1000 Watt Metal Halide Light - Class 1 Division 2 Groups A-D - T3b Temperature - 110,000 lumens 1000 Watt Metal Halide Light - Class 1 Division 2 Groups A-D - T3b Temperature - 110,000 lumens Part #: HALPRM-1000WMH Made in the USA The extremely durable Larson Electronics HALPRM-1000WMH metal halide

More information

45 Degree Surface Mount Explosion Proof, Waterproof Fluorescent Lights -Paint Booth, Rigs - 2 Lamp

45 Degree Surface Mount Explosion Proof, Waterproof Fluorescent Lights -Paint Booth, Rigs - 2 Lamp 45 Degree Surface Mount Explosion Proof, Waterproof Fluorescent Lights -Paint Booth, Rigs - 2 Lamp Part #: EPL-48-2L-45D Made in the USA The Larson Electronics EPL-48-2L-45D Explosion Proof Fluorescent

More information

Low brightness and uplighting combine to create a pleasing visual environment. Softbay Series

Low brightness and uplighting combine to create a pleasing visual environment. Softbay Series Low brightness and uplighting combine to create a pleasing visual environment Softbay Series Keene MAKES LIGHT WORK Softbay is a durable performer in light-to-moderate industrial environments and an enduring

More information

SAFR LED S A F R L E D. LED Area Lighting for Hazardous Locations

SAFR LED S A F R L E D. LED Area Lighting for Hazardous Locations LED Class I, Division 2, Groups A, B, C & D Class II, Division & 2, Groups E, F & G Class III Class I, Zone 2, Groups IIA, IIB & IIC UL 8750 LED Safety UL 844 Hazardous Locations UL 598 Wet Locations UL

More information

Industrial Mercmaster LED Low Profile Luminaires For Ordinary Locations

Industrial Mercmaster LED Low Profile Luminaires For Ordinary Locations Type R, 4, 4X Marine Outside Type (Salt Water) For USA ONLY Applications Ordinary location fixtures suitable for use in: Heavy industrial locations where severe weather conditions, excessive moisture,

More information

Perimaliter Wallpacks

Perimaliter Wallpacks Perimaliter Wallpacks Perimaliter III PVL3 / PGM3 Perimaliter II PGL Solutions for Perimeter/Area Lighting Perimaliter Wallpacks The Perimaliter wallpack has been the design leader in refractor wallpacks

More information

NMF 2 SERIES Non-Metallic Enclosed and Gasketed Fluorescent Lighting for Wet and Damp Locations

NMF 2 SERIES Non-Metallic Enclosed and Gasketed Fluorescent Lighting for Wet and Damp Locations NMF 2 SERIES Non-Metallic Enclosed and Gasketed Fluorescent Lighting for Wet and s NEMA 4X UL 1598 Wet & s CUL IP65 NSF Enclosure N M F 2 339 NMF2 SERIES Non-Metallic Enclosed and Gasketed Fluorescent

More information

RSS SERIES R S S. Fluorescent Lighting for Hazardous Locations

RSS SERIES R S S. Fluorescent Lighting for Hazardous Locations RSS SERIES Fluorescent Lighting for Hazardous Locations R S S Class I, Division 2, Groups A, B, C & D UL 844 Hazardous Location UL 1598A Marine Outside Type CUL Wet Locations IP66 55 Ambient Temperature

More information

Surface Mount Explosion Proof, Waterproof Fluorescent Lights - T12 Very High Output - Oil Rigs - 2 L

Surface Mount Explosion Proof, Waterproof Fluorescent Lights - T12 Very High Output - Oil Rigs - 2 L Surface Mount Explosion Proof, Waterproof Fluorescent Lights - T12 Very High Output - Oil Rigs - 2 L Part #: EPL-48-2L-T12VHO Made in the USA The Larson Electronics EPL-48-2L-T12VHO Explosion Proof Fluorescent

More information

COMPACT FLUORESCENT EMERGENCY FIXTURES

COMPACT FLUORESCENT EMERGENCY FIXTURES KILLARK H A Z LO C COMPACT FLUORESCENT EMERGENCY FIXTURES VE3Q/VE4Q Class I, Div. 2, Groups A,B,C,D Class l, Zone 2, Groups IIC, llb, lla Class II, Div. 1 & 2, Groups E,F,G Class III NEMA 3, 4, 4X IP66

More information

ExceLine 1611 Clovis R. Barker Road San Marcos, TX Fax: PT#: EXSP038A0712

ExceLine 1611 Clovis R. Barker Road San Marcos, TX Fax: PT#: EXSP038A0712 Type No. Catalog No. Job. Name ILXGHB MasterColor Elite Series APPLICATIONS Applications include industrial facilities, manufacturing plants, retail applications, and gymnasiums. CONSTRUCTION The ILX MasterColor

More information

WPP25 250W MP Wal-Pak Borosilicate Glass Hinged/Removabl

WPP25 250W MP Wal-Pak Borosilicate Glass Hinged/Removabl 3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 WPP25 250W MP Wal-Pak Borosilicate Glass Hinged/Removabl Catalog Number Manufacturer Description Weight per unit Product

More information

220/230/240V Watt High Pressure Sodium - Hazardous Location Lighting - C1D2 - Pole Mount

220/230/240V Watt High Pressure Sodium - Hazardous Location Lighting - C1D2 - Pole Mount 220/230/240V Watt High Pressure Sodium - Hazardous Location Lighting - C1D2 - Pole Mount Part #: HAL-PRM-250W-HPS-220V-PT Page: 1 Made in the USA The efficient HAL-PRM-250W-HPS-220V-PT high pressure sodium

More information

FM9 Aluminum Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC.

FM9 Aluminum Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC. Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections for branch runs. Permit access to conductors

More information

Haz. HazMax Summit/ss TECHNICAL SPECIFICATIONS

Haz. HazMax Summit/ss TECHNICAL SPECIFICATIONS Haz HazMax Summit/ss APPLICATIONS High, mid & low bay Petrochemical facilities Hazardous locations Munitions manufacturing and storage Watertight requirements Waste water treatment plants Dusttight requirements

More information

Induction Compact Fluorescent HID LPQ. Canopy Luminaire

Induction Compact Fluorescent HID LPQ. Canopy Luminaire Induction Compact Fluorescent HID LPQ Canopy Luminaire LPQ Series Lighting For Life Featuring the Philips QL Induction Lighting System 100,000 Hours of Operation Very Low Maintenance Efficient Operation

More information

A R C H I T E C T U R A L LO W L E V E L F LO O D L I G H T S E R I E S

A R C H I T E C T U R A L LO W L E V E L F LO O D L I G H T S E R I E S T A B L E O F C O N T E N T S A R C H I T E C T U R A L LO W L E V E L F LO O D L I G H T S E R I E S LLF755 - Low Level Flood with Anti-Glare Faceplate C1.1 LLF800 - Low Level Flood with Anti-Glare Faceplate

More information

Champ MLL LED luminaires

Champ MLL LED luminaires The Champ MLL linear LED is specifically designed to replace fluorescent T12, T8 and T5HO lighting in harsh and hazardous applications. The rugged and durable design features the industry s most versatile

More information

Aluminum Conduit Bodies, Covers and Gaskets For Rigid Conduit & IMC.

Aluminum Conduit Bodies, Covers and Gaskets For Rigid Conduit & IMC. NEC/CEC Suitable for use in the following Applications To provide access to conductors for pulling, splicing, maintenance and future changes/upgrades. Allows connection of straight conduit runs, branch

More information

1000 Watt Metal Halide Flood Light - 110,000 Lumens - Slipfitter Mount - 120~277 Volts AC

1000 Watt Metal Halide Flood Light - 110,000 Lumens - Slipfitter Mount - 120~277 Volts AC 1000 Watt Metal Halide Flood Light - 110,000 Lumens - Slipfitter Mount - 120~277 Volts AC Part #: MHFL-1000W Made in the USA The powerful and efficient MHFL-1000W metal halide light fixture from Larson

More information

Rig-A-Lite LED Luminaire Guide. Superior LED Technology for Hazardous and Severe Environments. Five-Year Warranty

Rig-A-Lite LED Luminaire Guide. Superior LED Technology for Hazardous and Severe Environments. Five-Year Warranty Rig-A-Lite LED Luminaire Guide Superior LED Technology for Hazardous and Severe Environments Five-Year Warranty Rig-A-Lite LED Luminaires The Rig-A-Lite LED luminaires are the perfect combination of dependability,

More information

AerolumeTM. Collection. Area Luminaires 3 Fixture Sizes W HID 64/80/120

AerolumeTM. Collection. Area Luminaires 3 Fixture Sizes W HID 64/80/120 Aerolume Collection Area Luminaires Fixture Sizes 70-00W HID 64/80/ Overview Mini-Aerolume Aerolume Aerolume-G 1." (4.9mm) 18" (47.mm) " (84.mm) 6." (16.1mm) 19" (48.6mm) 4" (1.4mm) 8" (0.mm) " (84.mm)

More information

XPF. XPFMax Performer/al FEATURES TECHNICAL SPECIFICATIONS

XPF. XPFMax Performer/al FEATURES TECHNICAL SPECIFICATIONS XPF XPFMax Performer/al APPLICATIONS, II & III Division 1 explosive atmospheres High, mid & low bay Fuel dispensing facilities Paint booths Marine and watertight requirements Paint & formulation facilities

More information

Cynergy Series Retrofit Kit

Cynergy Series Retrofit Kit project: fixture type: catalog #: quantity: The Cynergy Series LED Retrofit system has been developed to dramatically improve existing recessed troffer performance using Solid State Lighting (SSL) technologies.

More information

The ideal complement for commercial and retail spaces where users will appreciate classic interpretations of style and elegance. Kaleidoscope Series

The ideal complement for commercial and retail spaces where users will appreciate classic interpretations of style and elegance. Kaleidoscope Series The ideal complement for commercial and retail spaces where users will appreciate classic interpretations of style and elegance Kaleidoscope Series Keene MAKES LIGHT ORK Keene presents Kaleidoscope, an

More information

APPLICATIONS APPROVALS. GASKET One piece neoprene. LATCHES Plated steel twist draw. ENTRIES 1 2 NPT feed-through outlets, 3 4 NPT outlets optional.

APPLICATIONS APPROVALS. GASKET One piece neoprene. LATCHES Plated steel twist draw. ENTRIES 1 2 NPT feed-through outlets, 3 4 NPT outlets optional. Haz HazMax Pinnacle/al APPLICATIONS Hazardous locations Watertight requirements Dusttight requirements Oil and gas exploration and production Waste water treatment plants Pipeline compressor / pumping

More information

Understanding Electronic UltraMax HID Ballasts

Understanding Electronic UltraMax HID Ballasts Understanding Electronic UltraMax HID Ballasts GE offers a complete line of electronic ballasts for HID lighting systems. Electronic HID, like electronic fluorescent systems that preceded it, significantly

More information

Class 1 Div 2 LED Pivoting Light - 2 foot 2 lamp - LED T series Style (fluorescent replacement)

Class 1 Div 2 LED Pivoting Light - 2 foot 2 lamp - LED T series Style (fluorescent replacement) Class 1 Div 2 LED Pivoting Light - 2 foot 2 lamp - LED T series Style (fluorescent replacement) Part #: HAL-24-2L-LED-BMSW Page: 1 Made in the USA The Larson Electronics HAL-24-2L-LED-BMSW Hazardous Area

More information

U-Line Contender Factory Sealed 20 Amp Plugs and Receptacles Explosionproof, Dust-Ignitionproof

U-Line Contender Factory Sealed 20 Amp Plugs and Receptacles Explosionproof, Dust-Ignitionproof U-Line Contender Factory Sealed 20 Amp Plugs and Receptacles Explosionproof, Dust-Ignitionproof Class I, Groups C, D Class I, Division 2, Group B Class I, Zone 1, Group IIB Class I, Zone 2, Group IIB +

More information

2 LED Designer Series

2 LED Designer Series LED Designer Series When appearance is most important, TCP s LED Designer Series turns any location into something truly exceptional. Limitless options for the following applications: Offices Restaurants

More information

KAD250MR3TBSPD04 Wall Fixture

KAD250MR3TBSPD04 Wall Fixture 8 South Street 796-76, TX Nacogdoches Phone: 96-69-79 Fax: 96-6-68 AllenWatson@elliottelectric.com MRTBSPD Wall Fixture Catalog Number MRTBSPD Manufacturer Description Area Light, Metal Halide Lamp; Lamp

More information

Variety of mounting methods. UL, CUL, and CSA listed for general and hazardous locations

Variety of mounting methods. UL, CUL, and CSA listed for general and hazardous locations PREDATOR The Predator floodlight offers versatility, efficiency, and performance, which provides a unique solution to a variety of lighting needs. With the Predator, Holophane continues its legacy of utilizing

More information

Class 1 Division 2 Hazardous Location LED Light - Corrosion Resistant for Marine (Saltwater) - Offsh

Class 1 Division 2 Hazardous Location LED Light - Corrosion Resistant for Marine (Saltwater) - Offsh Class 1 Division 2 Hazardous Location LED Light - Corrosion Resistant for Marine (Saltwater) - Offsh Part #: HALP-48-2L-LED Page: 1 Made in the USA The Larson Electronics HALP-48-2L-LED Hazardous Area

More information

KEMLUXIII KH SERIES HAZARDOUS LOCATION

KEMLUXIII KH SERIES HAZARDOUS LOCATION KEMLUXIII SERIES HAZARDOUS LOATION AT.# APPROVALS JOB TYPE SPEIFIATIONS Applications - Designed to efficiently light corrosive and harsh applications such as chemical, petrochemical, marine, power generation,

More information

Fixture Spec Sheet HFA2 Series 4/15/2011

Fixture Spec Sheet HFA2 Series 4/15/2011 HIGH BAY FLUORESCENT FOUR LAMP DESCRIPTION Factory Installed Option J HFA2 series high-bay fluorescent fixture is a great energy saving alternative to traditional HID high-bay fixtures. This fixture operates

More information

www.greenelectricalsupply.com Page 1 of 4 The HLR SERIES hazardous location family of fixtures is suitable for use in a wide range of indoor and outdoor Class I Division 2 applications. Available in eight

More information

Linear Fluorescent Highbays. A comprehensive selection of high output commercial/industrial fluorescent lighting

Linear Fluorescent Highbays. A comprehensive selection of high output commercial/industrial fluorescent lighting Linear Fluorescent Highbays A comprehensive selection of high output commercial/industrial fluorescent lighting Linear Fluorescent Highbay Lighting T-Series Full Body, Specification Grade Fluorescent Highbay

More information

DESCRIPTION Galleria's beauty and versatility make it an excellent choice for roadway and general area lighting applications. An aesthetic reveal in the formed aluminum housing gives the Galleria a distinctive

More information

Class I, Div. II Fluorescent Fixture - Emergency Battery Backup - Corrosion Resistant (Saltwater) -

Class I, Div. II Fluorescent Fixture - Emergency Battery Backup - Corrosion Resistant (Saltwater) - Class I, Div. II Fluorescent Fixture - Emergency Battery Backup - Corrosion Resistant (Saltwater) - Part #: HALP-EMG-24-2L-BX Made in the USA The Larson Electronics HALP-EMG-24-2L-BX Hazardous Area Fluorescent

More information

Potenza Commercial Pendant Compact Fluorescent, Incandescent, HID Medium, Large

Potenza Commercial Pendant Compact Fluorescent, Incandescent, HID Medium, Large PRODUCT SPECIFICATIONS PENDANT: Extruded aluminum body with silver powder coat finish. Clear prismatic acrylic diffuser dome provides soft self-illumination. MOUNTING: 4 solid square fixture hanger attached

More information

FM9 Aluminum Unilet Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC.

FM9 Aluminum Unilet Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC. FM9 Aluminum Unilet Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC. : Conduit Bodies Applications Serve as pulling fittings. Make bends in conduit system. Provide

More information

Class I Division 2 LED Pivoting Light - 4 foot 3 lamp - LED Oil Rig Fluorescent Replacement

Class I Division 2 LED Pivoting Light - 4 foot 3 lamp - LED Oil Rig Fluorescent Replacement Class I Division 2 LED Pivoting Light 4 foot 3 lamp LED Oil Rig Fluorescent Replacement Part #: HAL483LLEDBMSW Page: 1 Made in the USA The Larson Electronics HAL483LLEDBMSW Hazardous Area LED Light Fixture

More information

Test Sample Description Catalog Number: Description:

Test Sample Description Catalog Number: Description: Project Number Date 15.00487 3/26/2015 LAB 6 Test Sample Description Catalog Number: Description: P3408-0930K9 Close to Ceiling fixture Test Method: Preburn Time: Time To Stabilize: Total Operating Time:

More information

Receptacle housing and cover optional malleable iron on EFS-M Series. Spring-loaded cover seats against neoprene gasket.

Receptacle housing and cover optional malleable iron on EFS-M Series. Spring-loaded cover seats against neoprene gasket. U-Line Factory Sealed 20 Amp Plugs and Receptacles Dead-Front Safety Construction. Choice of Aluminum or Thermoplastic Polyester Plug. Class I, Division 1 and 2 Groups B, C, D NEMA 3, 3R, 7BCD, 9FG Applications

More information

DuraPro Hazardous Area Fluorescent

DuraPro Hazardous Area Fluorescent CSA - Class I Div. 2 - Groups A, B, C, & D CSA - Class I Zone 2 - Groups IIA, IIB & IIC CSA - Class II Div. 2 - Groups F & G CSA - Type 3 UL 844 - Class I Div. 2 - Groups A, B, C, & D UL - Outdoor Marine

More information