Mercmaster II HID Luminaires High Pressure Sodium and Pulse Start Metal Halide. Mogul Base UNILETS for Use with Threaded Metal Conduit.
|
|
|
- Amber Cross
- 6 years ago
- Views:
Transcription
1 UNILETS for Use with Threaded Metal Conduit. Applications Enclosed and gasketed HID lighting fixtures for use in tunnels, walkways, bridges, storage facilities, processing plants, parking lots, foundries, manufacturing plants, power plants and other locations where moisture, dirt, dust or corrosive atmospheres are encountered. Fixtures suited for Class I, Division 2; Class II, Division 1 and 2; and. Suitable for use in wet and outdoor saltwater locations. Wide range of wattages and voltages. Choice of ballasts for 175 W PSMH; and 50 W-150 W HPS lamps in 120, 208, 240, 277 and 480 voltages. Choice of light sources: high pressure sodium and pulse start metal halide. Choice of optical assembles: (1) prismatic globe with or without guard through 175 W; or (2) Type V closed prismatic glass refractor through 175 W. (Types II, III and IV also available through 175 W. Also polycarbonate globes for 100 W max. in HPS) Choice of mounting hoods: pendant (rigid or flexible), 25 (angle) stanchion, ceiling and wall mounting. Porcelain reflector for standard applications and Fiberglass reinforced polyester reflector for installations where luminaire is subject to exceptionally severe corrosive atmospheres. Features Superior corrosion-resistance: copperfree aluminum mounting hoods, ballasts and guards with epoxy powder coat, inside and out. Standard pendant mounting hood for rigid or flexible mounting. Balanced round design automatically hangs plumb when used with flexible hanger. Positive sealing. Hinge and bolt construction assures 360 compression at all points on gasket. One-piece ballast housing for each component provides even heat dissipation for cooler operation and longer ballast life. Heat barrier isolates capacitor from ballast. Standard non-pcb biodegradable capacitors installed in separate compartment. Mogul socket is furnished with 200 C (392 F) welded leads, pre-wired to the ballast. Porcelain socket assures trouble-free operation in high ambient installations. Guards protect globes from damage. Keyhole slots allow easy installation and are secured with stainless steel screws. Prismatic glass globes and glass refractors are standard (plastic refractors also available) and thread directly into fixture housing. Eliminate glare and provide uniform light distribution. Vented reflectors result in cooler, dirt-free operation, increased lumen output. Reflectors secured to mounting hood with screws (furnished). Choice of reflector styles: white porcelain enamel or Fiberglass reinforced polyester; standard dome or 30 angle. Optional photocell provides automatic on-off control. All Mercmaster mounting hoods have provision for easy field installation of fuses in fixtures (see fuse kit listings). Standard Materials Mounting hoods, ballast bodies and guards: copperfree (4/10 of 1% max.) aluminum Reflectors: fiberglass reinforced polyester Globes: 50 W-100 W, threaded prismatic glass; 150 W and 175 W, threaded heat-resistant prismatic glass Refractors: 50 W to 150 W, heat-resistant prismatic glass and plastic; 175 W prismatic glass Standard Finishes Mounting hoods, ballast bodies, guards: epoxy powder-coat finish. Two-coat baked finish, electrostatically applied for complete uniform surface protection Polyester reflectors: natural finish Options Fuses for fixtures. For fuse kits see Electrical Specifications and Fuse Kits page. MH fixtures for Quartz Auxiliary lamps. Relay switch installed in fixture when specified. Add suffix -MTE to fixture catalog number for 120 V through 277 V, and suffix -480E to fixture catalog number for 480 V fixture. Hot Restrike option add suffix -R. Smart Starter available for HPS and PSMH. Add suffix -S. NEC Certifications and Compliances UL Standard: UL 1598, UL 1598A, UL 844 UL Listed: E10444 Note: Fixtures equipped with optional photocell or quartz auxilliary lamp do not comply with UL requirements and are not suitable for use in classfied locations. 325
2 UNILETS for Use with Threaded Metal Conduit. Illustrated Features High Temperature Sockets Mogul base high temperature socket for 50W through 175W HID lamps. Aluminum Inner Reflector Solid aluminum inner reflector improves photometric efficiency. Hood/Ballast Gasket Silicone rubber gasket seals out moisture, dirt and dust. Stainless Steel Latch Assembly Captive, stainless steel latch assembly bolt and nut closes securely, resists attack of corrosive atmospheres. Swing-away design simplifies servicing. "Safety" High Hinge Extra-high hinge provides additional protection against accidental ballast housing disengagement during installation or maintenance. Epoxy Finish Ballast housing, hoods and guards are copperfree aluminum with epoxy powder coat finish. Electrical Protection Ground wire provided to bond mounting hood to ballast housing. Fiber insulator protects ballast and capacitor. Photocell Installs through knock-out in mounting hood; provides continuous ON-OFF duskto-dawn control. Fixtures with optional photocell or quartz auxiliary lamp do not comply with UL requirements for use in classified locations. Balanced Round Design Pendant fixtures automatically hang plumb. Fixtures and hangers suitable for Class I, Division 2 applications. JB Series Box and Flexible Hanger Fuses Mount to Hood Bosses Two screws secure fuse kit to mounting boss in any Mercmaster mounting hood. 326
3 UNILETS for Use with Threaded Metal Conduit. Quartz Emergency Light for Pulse Start Metal Halide or High Pressure Sodium Fixtures Mercmaster fixtures for or metal halide and high pressure sodium lamps can be supplied with a socket to accept a 150 W 120 V quartz lamp. This D.C. bayonet base socket is in addition to the standard lamp socket. In the event of a momentary power interruption, the quartz lamp is automatically switched on. The single ended quartz lamp remains energized until the HID restrikes and reaches about 60% output. The quartz emergency lamp socket is wired to a 120 V tap on the ballast and is therefore independent of the lighting fixture voltage. No special field wiring is necessary. Description For fixture volts of 120, 208, 240 or 277 Catalog Suffix -MTE For fixture volts of E Accessory Options Guards: Guards are die-cast copperfree aluminum with baked epoxy finish to match fixtures. Fixture supplied with stainless steel mounting screws which thread into stainless steel inserts on fixture housing to attach guard. To order fixture with guard, add suffix -G to catalog number before adding voltage suffix. Reflectors: Standard dome and 30 angle polyester reflectors. Hot Restrike: Instantly restrikes a hot HPS lamp when power is restored after a momentary outage. Available factory-installed only. To order, add suffix -R to catalog number. Quartz Emergency Light: When ordered, HPS fixtures will be supplied with a prewired special DC bayonet base socket to accept a 150W, 120V quartz lamp (not furnished) that automatically switches on when a power outage occurs. Fixtures ordered with this quartz emergency lamp feature do NOT comply with requirements for classified areas and should be used only in non-classified locations. To order, add suffix -E to catalog number and specify if a relay switch is desired. Photocell and Fuses: Photocontrol. Smart Starter: Performs as a conventional starter in lamp start-up. Removes itself from circuit at end of lamp life or if lamp is out of socket. Add suffix -S to catalog number. NOTE: Fixtures equipped with quartz emergency light do not comply with UL requirements and are not suitable for use in classified locations. 327
4 Class I, Division 2, Groups A, B, C, D; Class II, Division 1, Groups E, F, G UNILETS for Use with Threaded Metal Conduit. The following table shows maximum operating temperatures of Mercmaster fixtures for Class I, Division 2, in a +40 C (+104 F) ambient in free air as rated by UL. As shown, the higher the Temperature Identification Number, the cooler the fixture operates. Keep this in mind when selecting a fixture for a specific chemical listed on the Classified Area Suitability pages. Per the NEC. The temperature marking shown on fixtures shall not exceed the ignition temperature of the gas to be encountered. To illustrate, a 400W HPS fixture, which has a UL-NEC Temperature Identification Number of 350 [ C ( F)] does NOT exceed the Group D Methane (natural gas) ignition temperature of +540 C (+1004 F), and is therefore suitable for use in atmospheres containing that chemical. Mercmaster II Thermal Suitability Lamp Supply Ambient Class I, Division 2, Groups A, B, C, D Watts Type Wire Temp. C ( F) Temp. C ( F) Globe Globe and Reflector 8 Refractor 12 Refractor Globe Class II, Division 1, Groups E, F G Globe and 8 12 Reflector Refractor Refractor 50 HPS 90 (194) 40 (104) T3 T3 T3A T3A T3B T3B T3B T3B 70 HPS 90 (194) 40 (104) T3 T3 T3A T3A T3B T3B T3B T3B 100 HPS 90 (194) 40 (104) T2C T2C T3 T3 T3B T3B T3B T3B 150 HPS 90 (194) 40 (104) T2A T2A T2B T2B T3B 175 PSMH 90 (194) 40 (104) T2B T2B T2C T2C T3 T3 T Numbers Represent the Maximum Lamp Temperature for Class I, Division 2 Locations and Maximum Surface Temperature Under Dust Blanket for Class II, Division 1 Locations. T Number Temp Range ( C) Temp. Range ( ºF) T T2 T2A T2B T2C T2D T3 T3A T3B T3C T4 T4A T5 T All HPS fixtures suitable for operation at -40 C (-40 F); PSMH at -29 C (-20 F). For specific Class I suitability of each fixture listed, see Thermal Suitability above. Pendant, ceiling and wall mount are suitable for groups E and F only with T3A rating. Stanchion mount is suitable for groups E, F and G with a T3B rating. 328
5 50 W, 70 W, 100 W, 150 W HPS High Power Factor (Min. P.F. 90%). Suitable for Use in Wet Locations. Prismatic Glass Globe or Type V Closed Glass Refractor. Mogul Base Lamps. With Globe, With 8 Refractor Lamp Less Guard (NEMA V) Watts Pendant One Hub, Rigid or Flexible Mounting Ceiling Five Hubs, Four Close-Up Plugs Wall Five Hubs, Four Close-Up Plugs Stanchion One Hub Hub Size (Inches) Catalog Numbers With Globe With 8 Refractor With 12 Refractor 3/4 LPAL5075 LPAL5075J LPAL5075R 1 LPAL5010 LPAL5010J LPAL5010R 3/4 LPAL7075 LPAL7075J LPAL7075R 1 LPAL7010 LPAL7010J LPAL7010R 3/4 LPAL1075 LPAL1075J LPAL1075R 1 LPAL1010 LPAL1010J LPAL1010R 3/4 LPAL1575 LPAL1575J LPAL1575R 1 LPAL1510 LPAL1510J LPAL1510R 3/4 LPCL5075 LPCL5075J LPCL5075R 1 LPCL5010 LPCL5010J LPCL5010R 3/4 LPCL7075 LPCL7075J LPCL7075R 1 LPCL7010 LPCL7010J LPCL7010R 3/4 LPCL1075 LPCL1075J LPCL1075R 1 LPCL1010 LPCL1010J LPCL1010R 3/4 LPCL1575 LPCL1575J LPCL1575R 1 LPCL1510 LPCL1510J LPCL1510R 3/4 LPWBL5075 LPWBL5075J LPWBL5075R 1 LPWBL5010 LPWBL5010J LPWBL5010R 3/4 LPWBL7075 LPWBL7075J LPWBL7075R 1 LPWBL7010 LPWBL7010J LPWBL7010R 3/4 LPWBL1075 LPWBL1075J LPWBL1075R 1 LPWBL1010 LPWBL1010J LPWBL1010R 3/4 LPWBL1575 LPWBL1575J LPWBL1575R 1 LPWBL1510 LPWBL1510J LPWBL1510R 1-1/4 LPSL50125 LPSL50125J LPSL50125R 1-1/2 LPSL50150 LPSL50150J LPSL50150R 1-1/4 LPSL70125 LPSL70125J LPSL70125R 1-1/2 LPSL70150 LPSL70150J LPSL70150R 1-1/4 LPSL10125 LPSL10125J LPSL10125R 1-1/2 LPSL10150 LPSL10150J LPSL10150R 1-1/4 LPSL15125 LPSL15125J LPSL15125R 1-1/2 LPSL15150 LPSL15150J LPSL15150R To order fixture with guard, add suffix -G (before adding voltage suffix). Furnished with 8 NEMA V refractor to order with NEMA I or III refractor, change J in the catalog number to J1 or J3. Add voltage suffix -MTMED for Medium Base, 100W (order as special). Add voltage suffix -MT for 120, 208, 240 or 277 V. Add voltage suffix -MT for 120, 208, 240 or 277 V; -480 for 480 V. 329
6 100 W, 150 W, 175 W, 200 W PSMH Constant Wattage (Min. P.F. 90%). Suitable for Use in Wet Locations. Prismatic Glass Globe or Type V Closed Glass Refractor. Mogul Base Lamps. With Globe, Less Guard With 8 Refractor (NEMA V) Lamp Watts Pendant One Hub, Rigid or Flexible Mounting Hub Size (Inches) Catalog Numbers With Globe With 8 Refractor With 12 Refractor 3/4 LPAP1775 LPAP1775J LPAP1775R LPAP1710 LPAP1710J LPAP1710R Ceiling Five Hubs, Four Close-Up Plugs 3/4 LPCP1775 LPCP1775J LPCP1775R LPCP1710 LPCP1710J LPCP1710R Wall Five Hubs, Four Close-Up Plugs 25 Stanchion One Hub 175 3/4 LPWBP1775 LPWBP1775J LPWBP1775R 1 LPWBP1710 LPWBP1710J LPWBP1710R 1-1/4 LPSP17125 LPSP17125J LPSP17125R /2 LPSP17150 LPSP17150J LPSP17150R To order fixture with guard, add suffix -G (before adding voltage suffix). Furnished with 8 NEMA V refractor to order with NEMA I or III refractor, change J in the catalog number to J1 or J3. Add voltage suffix -MTMED for Medium Base, 100W (order as special). Add voltage suffix -MT for 120, 208, 240 or 277 V. Add voltage suffix -MT for 120, 208, 240 or 277 V; -480 for 480 V. 330
7 Hoods and Ballast Housings are Copperfree Aluminum (4/10 of 1%). Mounting Hoods Pendant Description Hub Size (Inches) Catalog Number One Hub, Rigid or Flexible Mounting 3/4 LPA-75 1 LPA-100 Ceiling Five Hubs, Four Close-Up Plugs 3/4 LPC-75 1 LPC-100 Wall Five Hubs, Four Close-Up Plugs 3/4 LPWB-75 1 LPWB Stanchion Mounting Adapter Mercmaster II Ballast Bodies One Hub Permits use of Mercmaster II pendant hood on existing V-51 and Mercmaster I mounting hoods. Remove Mercmaster I ballast body from existing mounting hood, thread in adapter and attach wire to Mercmaster II. 1-1/4 LPS /2 LPS-150 LPAD-1 Ballast Body Catalog Numbers Add Voltage Suffixes Type Lamp Watts Globe/12 Refractor 8 Refractor 120V 208V 240V 277V 480V High Pressure Sodium 50 LPB50L LPBLH50R -MT -MT -MT -MT High Power 70 LPB70L LPBLH70R -MT -MT -MT -MT -480 Factor (Min. P.F. 90%) 100 LPB100L LPBLH100R -MT -MT -MT -MT LPB150L LPBLH150R -MT -MT -MT -MT -480 Pulse Start Metal Halide Constant Wattage 175 LPB175P LPBP175R -MT -MT -MT -MT -480 (Min. P.F. 90%) MT (multi-volt) ballasts can be operated at an input voltage of either 120, 208, 240 or 277 V. 480 ballasts can be operated at input voltage of 480 V. 331
8 Screws furnished to Fasten Reflectors to Ballast Body. Refractors Thread Directly into Ballast Body. Prismatic Glass Globes Description Clear Heat-Resistant Amber Blue Green Red Catalog Number VPGL-2HR VPGL-2AM VPGL-2BL VPGL-2GR VPGL-2RE Coated Prismatic Tuff-Skin Glass Globes For use in areas where fixture is subject to extreme thermal shock Clear Heat-Resistant VPGL-2HRT Polycarbonate Globes Impact-Resistant Use 100W Lamp max.; do not use in ambients exceeding +25 C (+77 F) Light Distribution Closed Prismatic Refractors 50 W-200 W IES/NECA Distribution Curves Clear Amber Green Red 8 Glass ( W ) 12 Glass ( W ) VPGL-2PL VPGL-2AMPL VPGL-2GRPL VPGL-2REPL 12 Polycarbonate ( W ) NEMA I LPG-R1 NEMA II LPRF-2CG LPRF-2CP NEMA III LPG-R3 LPRF-3CP 8 Refractor 12 Refractor NEMA IV LPRF-4CP NEMA V LPG-R5 LPRF-5CG LPRF-5CP Polycarbonate globes are shatter-resistant for use in processing plants, canneries, dairies, bakeries or anywhere broken glass would prove a hazard. Ideally suited for areas where vandalism, high replacement and high maintenance costs are a problem. Do not use in ambients exceeding +25 C (+77 F). For burning in vertical base-up positions only. Registered trademark of Thomas Manufacturing Corporation, Parkton, Md. It is recommended that guards be used with these globes. 150 W max. for HPS. PSMH only up to 25 C maximum. 332
9 Screws furnished to Fasten Reflectors to Ballast Body. Refractors Thread Directly into Ballast Body. Guard Description Catalog Number Guard for Glass Globe KGU2 Steel Guards for 8 and 12 Refractors Guard for 8 Refractor Guard for 12 Refractor LPRG-2 LPBG-12 LPRG-2 Polyester Reflectors LPBG-12 3 machine screws furnished Standard Dome KR2-ST 30 Angle KR2-AN Standard Dome 30 Angle Replacement Gaskets Silicone Rubber Globe and 12 Refractor Gasket VPGL-GK 8 Refractor Gasket KRF-GK Photocell (Hazardous) 120 Volt PC120D2 208 thru 277 Volt PC247D2 Mounting Hood Weights Type Weight kg (lb) Type Weight kg (lb) Pendant 1.4 (3) Wall 2.3 (5) Ceiling 2.3 (5) Stanchion 1.8 (4) Reflectors and Refractors Weight includes globe and guard Watts HPS PSMH Wt. kg (lb) Catalog Number Wt. kg (lb) Catalog Number Wt. kg (lb) Catalog Number Wt. kg (lb) Catalog Number Standard Dome Reflector 30 Angle Reflector 8 Refractor 12 Refractor 50, (2.5) KR2-ST 1.1 (2.5) KR2-AN 2.4 (5.25) LPG-R1 5.9 (13) LPRF-5CG (5.25) LPG-R3 5.9 (13) (5.25) LPG-R5 5.9 (13) 333
10 UNILETS for Use with Threaded Metal Conduit. Electrical Specifications Line Voltage Type of Ballast Starting Amps Operating Amps 50 Watt High Pressure Sodium 120 HX-HPF HX-HPF HX-HPF HX-HPF Watt High Pressure Sodium 120 HX-HPF HX-HPF HX-HPF HX-HPF HX-HPF Watt High Pressure Sodium 120 HX-HPF HX-HPF HX-HPF HX-HPF HX-HPF Watt High Pressure Sodium 120 HX-HPF HX-HPF HX-HPF HX-HPF HX-HPF Watt Pulse Start Metal Halide 120 C.W.A C.W.A C.W.A C.W.A C.W.A Total Watts Fuse Kit Order fuses as a separate item by catalog number from right columns. Lamp Watts Volts Fuse Quantity Required Fuse Kit Catalog Number HPS PSMH F F F F F F F F F F F F F F F F F F F F F F F F3 Fuses are filled with non-combustible granular material. Fuse Kit includes fuse, fuse block, wire, mounting screws and connectors. All mounting hoods have provisions for easy field installation of fuses in fixtures. 334
11 UNILETS for Use with Threaded Metal Conduit. Dimensions in Millimeters (Inches) Pendant Mount 25 Angle Stanchion Mount Ceiling Mount Wall Mount Fixture with 8 Refractor Fixture with Guard and Polyester Reflector Fixture with 12 Refractor 335
12 150 W HPS * Photometric data is based on fixtures with 150-watt clear High Pressure Sodium lamp (16,000 lumen). For candlepower values of fixtures with other HPS lamps, use the following multipliers; for 100 W (9,500 lumen) HPS lamp 0.594; for 70 W (6,400 lumen) HPS lamp 0.40; for 50 W (4,000 lumen) HPS lamp For candlepower values of fixture with guard, multiply by Photometric Data Total Luminaire Efficiency = 86.1% CIE Type - Semi-Direct Spacing REPORT NUMBER: LP15LGG 150 W High Pressure Sodium fixture with Globe only * Plane Criteria Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 Diagonal 2.82 % Ceiling Rcc % Walls Rw Zone Lumens Zonal Lumen Summary Zone Lumens % Lamp % Fixture Zone Lumens % Lamp % Fixture Total Luminaire Efficiency = 73.6% CIE Type - Direct Spacing REPORT NUMBER: LP15LST 150 W High Pressure Sodium fixture with Standard Dome Reflector * Plane Criteria Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 Diagonal 1.68 % Ceiling Rcc % Walls Rw Zone Lumens Zonal Lumen Summary Zone Lumens % Lamp % Fixture Zone Lumens % Lamp % Fixture
13 150 W HPS * Photometric data is based on fixtures with 150-watt clear High Pressure Sodium lamp (16,000 lumen). For candlepower values of fixtures with other HPS lamps, use the following multipliers; for 100 W (9,500 lumen) HPS lamp 0.594; for 70 W (6,400 lumen) HPS lamp 0.40; for 50 W (4,000 lumen) HPS lamp For candlepower values of fixture with guard, multiply by Photometric Data Total Luminaire Efficiency = 73.1% CIE Type - Direct Spacing REPORT NUMBER: LP15LAN 150 W High Pressure Sodium fixture with 30 Angle Dome Reflector * Plane Criteria Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 Diagonal 1.62 % Ceiling Rcc % Walls Rw Zone Lumens Zonal Lumen Summary Zone Lumens % Lamp % Fixture Zone Lumens % Lamp % Fixture Total Luminaire Efficiency = 81.1% REPORT NUMBER: LP15LJ CIE Type - Semi-Direct 150 W High Pressure Sodium fixture with Spacing 8 Prismatic Glass Reractor - NEMA Type V * Plane Criteria Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 Diagonal 3.40 % Ceiling Rcc % Walls Rw Zone Lumens Zonal Lumen Summary Zone Lumens % Lamp % Fixture Zone Lumens % Lamp % Fixture
14 175 W PSMH * Photometric data is based on fixtures with 175-watt clear Pulse Start Metal Halide lamp (17,500 lumen). For candlepower values of fixtures with other PSMH lamps, use the following multipliers: for 250 W (23,750 lumen) PSMH lamp 1.36; for 100 W (8,500 lumen) PSMH lamp For candlepower values of fixture with guard, multiply by Photometric Data Total Luminaire Efficiency = 75.4% CIE Type - General Diffuse Spacing REPORT NUMBER: LP17PGG 175 W Pulse Start Metal Halide fixture with Globe only * Plane Criteria n/a Coefficients of Utilization - Zonal Cavity Method n/a Effective Floor Cavity Reflectance 0.20 Diagonal n/a % Ceiling Rcc % Walls Rw Zone Lumens Zonal Lumen Summary Zone Lumens % Lamp % Fixture Zone Lumens % Lamp % Fixture Total Luminaire Efficiency = 63.8% CIE Type - Direct Spacing REPORT NUMBER: LP17PST 175 W Pulse Start Metal Halide fixture with Standard Dome Reflector * Plane Criteria Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 Diagonal 1.66 % Ceiling Rcc % Walls Rw Zone Lumens Zonal Lumen Summary Zone Lumens % Lamp % Fixture Zone Lumens % Lamp % Fixture
15 175 W PSMH * Photometric data is based on fixtures with 175-watt clear Pulse Start Metal Halide lamp (17,500 lumen). For candlepower values of fixtures with other PSMH lamps, use the following multipliers: for 250 W (23,750 lumen) PSMH lamp 1.36; for 100 W (8,500 lumen) PSMH lamp For candlepower values of fixture with guard, multiply by Photometric Data Total Luminaire Efficiency = 61.6% CIE Type - Direct Spacing REPORT NUMBER: LP17PAN 175 W Pulse Start Metal Halide fixture with 30 Angle Dome Reflector * Plane Criteria Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 Diagonal 1.58 % Ceiling Rcc % Walls Rw Zone Lumens Zonal Lumen Summary Zone Lumens % Lamp % Fixture Zone Lumens % Lamp % Fixture Total Luminaire Efficiency = 73.9% REPORT NUMBER: LP17PJ CIE Type - Semi-Direct 175 W Pulse Start Metal Halide fixture with Globe and Spacing 8 Prismatic Glass Reractor - NEMA Type V * Plane Criteria Coefficients of Utilization - Zonal Cavity Method Effective Floor Cavity Reflectance 0.20 Diagonal 3.78 % Ceiling Rcc % Walls Rw Zone Lumens Zonal Lumen Summary Zone Lumens % Lamp % Fixture Zone Lumens % Lamp % Fixture
16 UNILETS for Use with Threaded Metal Conduit. Isofootcandle Data HPS Lamp Wattage Mounting Height M (Ft) Mercmaster II, High Pressure Sodium, No Reflector, No Guard 70 Watt 5,800 Lumen 100 Watt 9,500 Lumen 150 Watt 16,000 Lumen Horizontal Distance from Mounting Point M (Ft) 0 (0) 1.5 (5) 3.0 (10) 4.6 (15) 6.1 (20) 7.6 (25) 9.1 (30) 10.7 (35) 12.2 (40) 13.7 (45) 50 (152) Footcandle Chart (Initial Horiz. FTC) (8) (10) (12) (15) (20) (8) (10) (12) (15) (20) (8) (10) (12) (15) (20) Mercmaster II, High Pressure Sodium, With Reflector, No Guard 70 Watt 5,800 Lumen 100 Watt 9,500 Lumen 150 Watt 16,000 Lumen Footcandle Chart (Initial Horiz. FTC) 2.4 (8) (10) (12) (15) (20) (8) (10) (12) (15) (20) (8) (10) (12) (15) (20)
Applications. Straight Stanchion-Mount Fixture with Prismatic Glass Refractor and Guard. Pendant Mount Fixture with Prismatic Glass Refractor
Mercmaster III HID 50-250 Watt Luminaires Applications Enclosed and gasketed fixtures suitable for use in: Marine and wet locations A wide range of industrial, chemical processing and other areas where
Applications. Standard Materials
Code Master Jr. HID Factory Sealed Luminaires Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 50 W, 70 W, 00 W, 75 W PSMH. 75 W MH V. Medium Base. For Use with Threaded Metal Conduit. Class I, Division
CEC: Class I, Division 1 and 2, Groups B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Type 4X Exd IIB + H 2
Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 75 W PSMH. 75 W MH. Medium Base. For Use with Threaded Metal Conduit. Applications For use in chemical and petrochemical plants, such as manufacturers
Lighting: Explosionproof Area HID. Applications. Standard Materials
Code Master Jr. HID Factory Sealed Luminaires Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 50 W, 70 W, 00 W, 75 W PSMH. 75 W MH V. Medium Base. For Use with Threaded Metal Conduit. Class I, Division
HID/AREA: NEC/CEC EXPLOSIONPROOF. Applications. NEC/CEC Certifications and Compliances
Integrally Ballasted. 50 W, 70 W, 100 W, 150 W, 250 W, 400 W HPS; 175 W, 250 W, 320 W, 350 W, 400 W PSMH; 175 W, 250 W, 400 W MH. Applications Ideal for use in chemical and petrochemical plants, such as
Applications. Standard Materials. Certifications and Compliances
Code Master 2 HID Factory Sealed Luminaires Class I, Division 1 and 2, Groups C, D Class I, Division 1 and 2, Groups B, C, D Applications Ideal for use in chemical and petrochemical plants, such as manufacturers
Applications. Standard Materials. Certifications and Compliances
Code Master 2 HID Factory Sealed Luminaires NEC: Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Marine Type Electric Fixtures Outside Type (Salt Water) Class I, Division
Mercmaster LED Series Luminaires Enclosed and Gasketed Fixtures
Mercmaster Series Luminaires LIGHTING: ENCLOSED AND GASKETED AREA /INDUCTION Applications Enclosed and gasketed fixtures suitable for use in: Marine and wet locations A wide range of industrial, chemical
F1-1. HID Lighting: Enclosed and Gasketed. Description. 2, 3 Mercmaster III Family Tree Mercmaster III HID Low Profile Lighting Fixtures
HID Lighting: Enclosed and Gasketed 1-1 Page Description 2, 3 Mercmaster III amily Tree 2-22 Mercmaster III HID Low Profile Lighting ixtures 23-54 Mercmaster III HID 50-250W Lighting ixtures Mercmaster
G1-1. HID Lighting Fixtures: Explosionproof, Dust-Ignitionproof. Page Description
HID Lighting Fixtures: Explosionproof, Dust-Ignitionproof 1-1 Code Master 2 with Polyester Reflector Code Master Jr. without Reflector Code Master 2 Floodlight A-51 roup A & B with Porcelain Reflector
HID/FLOODLIGHT: NEC/CEC EXPLOSIONPROOF. Applications. Options
Applications UL Listed for Outside Type (Salt Water). Ideal in Class I, Division 1 and 2 installations in refineries, in pipeline transportation facilities, at drilling rigs and in production facilities
Mercmaster LED Series Luminaires Enclosed and Gasketed Fixtures
ATEX/IECEx: Zone 2 and 22 II 2 GD Lighting LIGHTING: ENCLOSED AND GASKETED AREA LED/INDUCTION Applications Enclosed and gasketed fixtures suitable for use in: Marine and wet locations A wide range of industrial,
LIGHTING: EXPLOSIONPROOF FLOODLIGHT. Applications. Options
Code Master 2 HID Factory Sealed Floodlights NEC: Class 1, Division 1 and 2, Groups C, D Marine Type Electric Fixtures Outside Type (Salt Water) CEC: V Class I, Division 1 and 2, Groups B, C, D Class II,
Code Master 2 Factory Sealed Induction Lighting System Explosionproof
Lighting Induction Code Master 2 Factory Sealed Induction Lighting System NEC/CEC: Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Marine Type Electric Fixtures Outside
Code Master 2 Factory Sealed Induction Lighting System Explosionproof
Code Master 2 Factory Sealed Induction Lighting System Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Marine Type Electric Fixtures Outside Type (Salt Water) NEMA 4X
Code Master Incandescent Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof For use with threaded metal conduit.
Applications For use in hazardous locations such as plants where plastics, paints, thinners and petrochemicals are manufactured. For use in chemical and petrochemical plants, such as manufacturers of plastics,
CEC: Class I, Division 1 and 2, Groups B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Type 4X Exd IIB + H 2 3/4 CAP-75 1 CAP-100
Code Master Jr. HID Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof Integrally Ballasted. 50 W, 70 W, 100 W, 150 W HPS; 50 W, 70 W, 100 W, 175 W PSMH. 175 W MH. Medium Base. For Use with Threaded
N2MV Series W Non-metallic
N2MV Series 50-175W Non-metallic Cl. I, Div. 2, Groups A, B, C, D Cl. II, Groups F, G Cl. III & Simultaneous Presence (100W max) Marine & Wet Locations, R, 4, 4X; IP56 L Applications: N2MV series Champ
Areamaster 1000 Floodlights Integrally Ballasted W HID For hazardous locations.
A, IIB, IIC Applications Powerful, efficient weatherproof lighting for large areas such as: Pulp and paper mills Processing plants Chemical plants Oil refineries Foundries Storage areas Waste and sewage
G1-24. Applications UL listed for marine type electric fixtures--outside. Ideal in Class I, Div. 1 and 2 installations
1-24 Applications UL listed for marine type electric fixtures--outside type (salt water). Ideal in Class I, Div. 1 and 2 installations in refineries, pipeline transportation facilities; at drilling rigs
SXPJ SERIES S X. HID & Compact Fluorescent Lighting for Hazardous and Hostile Locations
SXPJ SERIES HID & Compact Fluorescent Lighting for Hazardous and Hostile Locations S X PJ Class I, Division 1, Group C & D Class II, Division 1, Groups E, F & G Class III Zone 1, Groups IIA & IIB Factory
4L EVM Hazard Gard H.I.D. Luminaires Mogul Base Factory Sealed (Groups C.D)
4L EVM Hazard Gard H.I.D. Luminaires Mogul Base Factory Sealed (Groups C.D) Cl. I, Div. 1 Groups B (GB suffix),c,d (with suffix GB), IIB IIA Paint Spray (100W max) Application: Hazard Gard luminaires are
SXPJ SERIES S X azz.com/rigalite
SXPJ SERIES HID Lighting & Compact for Explosion Fluorescent Proof, Lighting Hazardous for and Hazardous Hostile Locations and Hostile Locations S X PJ Class I, Division 1, Group C & D Class II, Division
Areamaster 100 Wide-Beam Floodlights 70 W, 100 W, 150 W HPS; 70 W, 100 W, 150 PSMH For general, marine and hazardous locations.
Areamaster 100 Wide-Beam Floodlights NEC CEC V Class II, Divisions I and 2, Groups E, F, G V Class III Applications Highly efficient, all-weather flood-lighting for lower wattage service. Well suited for:
Industrial Mercmaster LED Low Profile Luminaires For Ordinary Locations
Type R, 4, 4X Marine Outside Type (Salt Water) For USA ONLY Applications Ordinary location fixtures suitable for use in: Heavy industrial locations where severe weather conditions, excessive moisture,
Areamaster LED Flood/High Bay Luminaires
Applications Typical applications include: Pulp and paper mills Processing plants Chemical plants Oil refineries Foundries Storage areas Waste and sewage treatment Parking garages Other areas where dust,
SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent
SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent S A F Class I, Division 2, Groups A, B, C & D Class II, Division 1 & 2, Groups E, F & G Class III Zone 2, Groups IIA, IIB & IIC UL 844
SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent
SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent S A F Class I, Division 2, Groups A, B, C & D Class II, Division 1 & 2, Groups E, F & G Class III Zone 2, Groups IIA, IIB & IIC UL 844
Applications. Illustrated Features
Applications For use in locations where a high degree of corrosion resistance is required. FR Series: For use in areas where high humidity or water vapor are present Typical uses include meat- or food-processing
Perimaliter Wallpacks
ENERGY SAVING Outdoor Lighting Perimaliter Wallpacks Perimaliter III PVL3 / PGM3 Perimaliter II PGL Solutions for Perimeter/Area Lighting Perimaliter Wallpacks The Perimaliter wallpack has been the design
SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent
SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent S A F Class I, Division 2, Groups A, B, C & D Class II, Division 1 & 2, Groups E, F & G Class III Zone 2, Groups IIA, IIB & IIC UL 844
FV Series Nonmetallic Fluorescent Luminaires For Hazardous and Adverse Locations
Applications For use in hazardous locations defined by the NEC and CEC as Class I, Division 2, Groups A, B, C and D; Class II, Division 2, Groups F and G; Marine Outdoor Salt Water; UL1598A and. As well
PGL350P W PS Wallpack
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 PGL350P1281 350W PS Wallpack Hubbell Lighting, Inc. Catalog Number Manufacturer Description Weight per unit Product Category
Standard Grade 14 Inch Reflector. Ordering Information
Job Type Dimensions Specifications B A NRTL/C C Damp Location D E Slick- On Quick- On F A B C D E F 9-1/2" 2" 9-1/2" 20-22/32 24-27/32" 9-7/16" 14-1/4" 241 mm 51 mm 241 mm 536-631 mm 240 mm 362 mm 9-1/2"
ExceLine 1611 Clovis R. Barker Road San Marcos, TX Fax: PT#: EXSP072A0812
Type No. Catalog No. Job. Name WL Series APPLICATIONS Applications include low ceiling applications, light industrial manufacturing facilities, offices, lobbies, conference rooms, food processing plants,
Standard Grade 23 Inch Reflector/Refractor. Ordering Information. series wattage source voltage optics color options options BL-LB1
Job Type Dimensions Specifications B A C NRTL/C Damp Location D Slick-On Quick-On E A B C D E 9-1/2" 2" 9-1/2" 26-11/16" 23-1/8" 241 mm 51 mm 241 mm 678 mm 587 mm 9-1/2" 1-1/8" 8-5/8" 25-13/16" 23-1/8"
SAFR LED SERIES S A F R L E D. Hazardous Location LED Luminaire
SAFR LED SERIES Hazardous Location LED Luminaire Class I, Division 2, Groups A, B, C & D Class II, Division & 2, Groups E, F & G Class III Class I, Zone 2, Groups IIA, IIB & IIC UL 8750 LED Safety UL 844
DMV Series W For Combustible Dusts
L DMV Series 50-250W For Combustible Dusts Champ H.I.D. Luminaires Cl. I, Div. 2, Groups A, B, C, D Restricted Breathing Cl. I, Div. 2 & Zone 2 (Suffix S826) Certified for IEC Zone 2 (Suffix S826TB) Cl.
WFH LED SERIES L E D. High-Bay Lighting for Hazardous & Wet Locations
WFH LED SERIES W FH High-Bay Lighting for Hazardous & Wet Locations Class I, Division 2, Groups A, B, C, & D Class II, Division 2, Groups F & G Class III UL 844 Hazardous Locations UL 1598 Wet Locations
MHD2/MHDO SERIES MHD2. Marine Heavy Duty Outdoor Non-Metallic Fluorescent CLASS 1 DIVISION 2 FLUORESCENT LIGHT
MHD2/MHDO SERIES Marine Heavy Duty Outdoor Non-Metallic Fluorescent Non-metallic, glass reinforced polyester housing. 3/4 in. NPT aluminum hub. Captive stainless steel latches. Stainless steel mounting
Fluorescent Lighting: Enclosed and Gasketed
luorescent Lighting: Enclosed and Gasketed 3-1 Page Description 2-5 V Series 2-3 eatures, Ordering Information and Accessories 4-5 Technical Data, Dimensions and Photometric Data 6-11 VRS and DRS luorescent
Perimaliter Wallpacks
Perimaliter Wallpacks Perimaliter III PVL3 / PGM3 Perimaliter II PGL Solutions for Perimeter/Area Lighting Perimaliter Wallpacks The Perimaliter wallpack has been the design leader in refractor wallpacks
WFHN LED SERIES W F H N L E D. High-Bay Lighting for Heavy Hose-Down Environments
WFHN LED SERIES High-Bay Lighting for Heavy Hose-Down Environments UL 1589 Wet Locations UL 8750 LED Safety NEMA 4X CUL Listed NSF Certified Food Equipment High Pressure Hose-Down One Piece Welded Aluminum
AFL FLOODLIGHT SERIES
AFL FLOODLIGHT SERIES A FL Flood Lighting for Hazardous Locations Class I, Division 2, Groups A, B, C & D UL 844 Hazardous Locations UL 598A Marine Outside Type Zone 2, Groups IIA, IIB & IIC CUL Cast Aluminum
MHD2/MHDO SERIES M H D 2. Marine Heavy Duty Non-Metallic Fluorescent
MHD2/MHDO SERIES Marine Heavy Duty Non-Metallic Fluorescent Class I, Division 2, Groups A, B, C & D Class II, Division 2, Groups F & G Class III Zone 2, Groups IIA, IIB & IIC UL 844 Hazardous Locations
ExceLine 1611 Clovis R. Barker Road San Marcos, TX Fax: PT#: EXSP038A0712
Type No. Catalog No. Job. Name ILXGHB MasterColor Elite Series APPLICATIONS Applications include industrial facilities, manufacturing plants, retail applications, and gymnasiums. CONSTRUCTION The ILX MasterColor
SAFJ LED SERIES S A L E D. Hazardous Location Compact LED
SAFJ LED SERIES Hazardous Location Compact LED Class I, Division 2, Groups A, B, C, & D Class II, Division 1 & 2, Groups E & F Class III Simultaneous Presence Enclosed & Gasketed Wet Locations NEMA 3R,
SAFR LED S A F R L E D. LED Area Lighting for Hazardous Locations
LED Class I, Division 2, Groups A, B, C & D Class II, Division & 2, Groups E, F & G Class III Class I, Zone 2, Groups IIA, IIB & IIC UL 8750 LED Safety UL 844 Hazardous Locations UL 598 Wet Locations UL
KH Series Kemlux III Enclosed/Gasketed
For use in corrosive, harsh, hazardous applications such as chemical, petrochem, marine, power generation, pharmaceutical, or food processing plants Mogul base socket on tanks C, D & E Medium base socket
ENDURALUME HL /02
ENDURALUME The Enduralume luminaire is an efficient, low brightness unit for lighting both industrial and commercial areas. Whether it be schools, food processing areas or warehouses, this is a great luminaire
HID/AREA: NEC/CEC ENCLOSED AND GASKETED. Applications
High Pressure Sodium, Pulse Start Metal Halide and Metal Halide Listed for simultaneous exposure to combustible dusts and flammable gases or vapors. Applications Enclosed and gasketed fixtures suitable
FOR PROPER AND SAFE INSTALLATION OF THIS PRODUCT, PLEASE READ THE FOLLOWING INSTRUCTIONS.
Installation Instructions for Mercmaster LED Low Profile Luminaire Fittings 650499-000 INSTRUCTION SHEET FOR PROPER AND SAFE INSTALLATION OF THIS PRODUCT, PLEASE READ THE FOLLOWING INSTRUCTIONS. Product
MHDS SERIES M H D S. Stainless Steel Marine Heavy Duty Luminaire for Hazardous Locations
MHDS SERIES Stainless Steel Marine Heavy Duty Luminaire for Hazardous Locations Class I, Division 2, Groups A, B, C & D Class II, Division 2, Groups F & G Class III UL 844 Hazardous Locations UL 198A Marine
MAR SERIES Fluorescent Lighting for Hazardous Locations
MAR SERIES M AR Fluorescent Lighting for Hazardous Locations Class I, Division 2, Groups A, B, C, & D Seismic Tested UL 844 Hazardous Locations UL 924 Emergency Lighting UL 1598A Marine Outside Type CSA
NMF 2 SERIES Non-Metallic Enclosed and Gasketed Fluorescent Lighting for Wet and Damp Locations
NMF 2 SERIES Non-Metallic Enclosed and Gasketed Fluorescent Lighting for Wet and s NEMA 4X UL 1598 Wet & s CUL IP65 NSF Enclosure N M F 2 339 NMF2 SERIES Non-Metallic Enclosed and Gasketed Fluorescent
A R C H I T E C T U R A L LO W L E V E L F LO O D L I G H T S E R I E S
T A B L E O F C O N T E N T S A R C H I T E C T U R A L LO W L E V E L F LO O D L I G H T S E R I E S LLF755 - Low Level Flood with Anti-Glare Faceplate C1.1 LLF800 - Low Level Flood with Anti-Glare Faceplate
WPP25 250W MP Wal-Pak Borosilicate Glass Hinged/Removabl
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 WPP25 250W MP Wal-Pak Borosilicate Glass Hinged/Removabl Catalog Number Manufacturer Description Weight per unit Product
Post Top Globes. ACL Large Acorn Post Top Globe Page 109. ACS Small Acorn Post Top Globe Page 109
s s ACS Small Acorn 109 ACL Large Acorn 109 AC3, AC5 Large Type 3 or 5 Acorn 109 BKS Small Buckeye 111 BKL Large Buckeye 111 BK3, BK5 Large Type 3 or 5 Buckeye 111 Small Chestnut 113 Large Chestnut 113
Industrial Areamaster LED Flood/High Bay Luminaires For Ordinary Locations. 250 W, 400 W, 750 W HID Light Level Equivalent
NEC/CEC: Type 3R, 4X IP66, IP67 Suitable for use in Wet Locations Marine Outside Type (Salt Water) Applications Powerful, efficient weatherproof lighting for applications such as: Security lighting Production
STATE OF NEW JERSEY DEPARTMENT OF TRANSPORTATION TRENTON, NEW JERSEY SPECIFICATIONS FOR HIGH PRESSURE SODIUM LUMINAIRES HIGH MAST TYPE
STATE OF NEW JERSEY DEPARTMENT OF TRANSPORTATION TRENTON, NEW JERSEY 08625 SPECIFICATIONS FOR HIGH PRESSURE SODIUM LUMINAIRES HIGH MAST TYPE N.J. Specification No. Effective Date: July 1, 2001 New Jersey
Areamaster LED Flood/High Bay Luminaires For Hazardous Locations. 250 W, 400 W, 750 W, 1000 W HID Light Level Equivalent
Class I, Division 2, Groups A, B, C, D Class I, Zone 2 Group IIC Class II, Division 1, Groups E, F, G Class II Division 2, Groups F, G Class III Simultaneous Exposure Type 3R, 4, 4X IP66/67 Applications
Prismpack. V Enclosed HOLOPHANE
HOLOPHANE Prismpack V Enclosed PRISMPACK ENCLOSED LUMINAIRES ARE DESIGNED FOR THE MOST STRINGENT OF HIGH BAY APPLICATIONS. THE ALUMINUM COVERED GLASS WITH THE GASKETED GLASS BOTTOM IS ESPECIALLY DESIRABLE
ExceLine 1611 Clovis R. Barker Road San Marcos, TX Fax: PT#: EXSP051A0712
Type No. Catalog No. Job. Name PFCB Series APPLICATIONS Applications include assembly areas, industrial facilities, and warehouses. CONSTRUCTION Low profile, heat dissipating die-cast aluminum ballast
KAD250MR3TBSPD04 Wall Fixture
8 South Street 796-76, TX Nacogdoches Phone: 96-69-79 Fax: 96-6-68 AllenWatson@elliottelectric.com MRTBSPD Wall Fixture Catalog Number MRTBSPD Manufacturer Description Area Light, Metal Halide Lamp; Lamp
Champ Fixtures. Class I, Division 2 Class I, Zone 2. Floodlight
Champ Fixtures Class I, Division Class I, Zone Floodlight Champ Floodlight Fixtures Whenever Cooper Crouse-Hinds develops a new product, system, or procedure, we focus on one overriding question: Will
Low brightness and uplighting combine to create a pleasing visual environment. Softbay Series
Low brightness and uplighting combine to create a pleasing visual environment Softbay Series Keene MAKES LIGHT WORK Softbay is a durable performer in light-to-moderate industrial environments and an enduring
SOURCE TE- Electronic MH. OPTIONS See Below OPTIONS. L = Lamped BLANK = General Purpose Optics A = Asymmetric Optics S = Spot
CATALOG NO. TYPE NO. JOB NAME -8 GP Flood Series Floodlighting GP (Mini) ORDERING INFORMATION Catalog Number: Example: GPA070TEL GP A TE SERIES GP-General Purpose Flood SIZE -Mini ACCESSORIES GPGS = Visor
Installation Instructions for Appleton Mercmaster LED Luminaire
650559-000 INSTRUCTION SHEET Installation Instructions for Appleton Mercmaster LED Luminaire FOR PROPER AND SAFE INSTALLATION OF THIS PRODUCT, PLEASE READ THE FOLLOWING INSTRUCTIONS. Product Safety Signal
A2CO Series. Aktra II Cutoff Floodlight, W HID. Overall Dimensions. Specifications EPA Effective Projected Area.
Catalog Number: Approvals: - - - - - Series/Source-Wattage Optics Voltage Mounting Options Finish (Reflector) (Factory Installed) Overall Dimensions 16 (40.6 cm) 8.9 (22.5 cm) Weight (maximum) 20.5 (52.07
TORNADOTM BOLLARD PATENTS PENDING
TORNADOTM BOLLARD PATENTS PENDING Day Tornado Bollard Unlike any bollard available in today s specification pallet, Tornado offers a new form and character for pedestrian scale lighting. Tornado adds an
DESCRIPTION Galleria's beauty and versatility make it an excellent choice for roadway and general area lighting applications. An aesthetic reveal in the formed aluminum housing gives the Galleria a distinctive
Applications. Straight Stanchion-Mount Fixture with Prismatic Glass Refractor and Guard. Pendant Mount Fixture with Prismatic Glass Refractor
Mercmaster III HID 50-250 Watt Luminaires High Pressure Sodium and Pulse Start Metal Halide Applications Enclosed and gasketed fixtures suitable for use in: Marine and wet locations A wide range of industrial,
HOLOPHANE Outdoor Lighting
68 Sign Lighting Signs have two purposesto attract attention and to convey a message. And during nighttime hours, sign lighting must provide visibility and legibility to deliver the appropriate message.
Prismalume. Enclosed HOLOPHANE
HOLOPHANE Prismalume Enclosed PRISMATIC GLASS REFLECTORS WITH TEMPERED GLASS CLOSURES ENSURE A LONG LASTING, DURABLE LIGHTING LUMINAIRE. A FULL RANGE OF WATTAGES AND LAMP TYPES COUPLED WITH AN ASSORTMENT
Form 85 Unilets Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit.
For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit. NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing.
Applications. Straight Stanchion-Mount Fixture with Prismatic Glass Refractor and Guard. Pendant Mount Fixture with Prismatic Glass Refractor
Mercmaster III HID 50-250 Watt Luminaires High Pressure Sodium and Pulse Start Metal Halide Applications Enclosed and gasketed fixtures suitable for use in: Marine and wet locations A wide range of industrial,
MOGUL BASE HID FIXTURES
KILLARK Z A H LO C MOGUL BASE HID FIXTURES Class I, Div. 1 & 2 Groups C,D Class l, Zone 1 & 2, Groups llb,lla Class l, Zone 1, AEx d IIB Class II, Div. 1 & 2, Groups Class III, Div. 1 & 2 Suitable for
N2LED Series Emergency Luminaires Non-Metallic Emergency Egress Lighting Systems with Remote or Direct Mounted Lamps.
Applications Enclosed and gasketed, non-metallic emergency lighting system suitable for use in areas where flammable gases or vapors may become present due to abnormal, unusual or accidental conditions
Induction Compact Fluorescent HID LPQ. Canopy Luminaire
Induction Compact Fluorescent HID LPQ Canopy Luminaire LPQ Series Lighting For Life Featuring the Philips QL Induction Lighting System 100,000 Hours of Operation Very Low Maintenance Efficient Operation
OP2 CosmoPolis Series
Catalog Number: Approvals: - - - - - Series/Source-Wattage Optics E ballast Voltage Mounting Options Finish (Factory Installed) Accessories (Field Installed) Date: Page of 6 Overall Dimensions OP2 arm
INSTRUCTION SHEET. Installation Instructions for Mercmaster LED Luminaire. Applications. Agency Ratings. Product Safety
650457-000 INSTRUCTION SHEET Installation Instructions for Mercmaster Luminaire for proper and safe installation of this product, please read the following instructions. Applications Marine and wet locations;
MLCAN60LED50 CONSTRUCTION: 60W LED CANOPY LIGHT
MLCANLED50 W LED CANOPY LIGHT The surface mounted canopy fixture, with a shatter and UV resistant polycarbonate lens, can be mounted to J-box or directly to non-combustable surfaces. The LEDs are proprietary
COMPACT FLUORESCENT EMERGENCY FIXTURES
KILLARK H A Z LO C COMPACT FLUORESCENT EMERGENCY FIXTURES VE3Q/VE4Q Class I, Div. 2, Groups A,B,C,D Class l, Zone 2, Groups IIC, llb, lla Class II, Div. 1 & 2, Groups E,F,G Class III NEMA 3, 4, 4X IP66
INCANDESCENT/COMPACT FLUORESCENT/MEDIUM BASE HID
KILLARK INCANDESCENT/COMPACT FLUORESCENT/MEDIUM BASE HID Class I, Div. 1 & 2, Groups C,D Class I, Zones 1 & 2, Groups llb, lla Class II, Div. 1 & 2, Groups E,F,G Class III, Div. 1 & 2 Suitable for wet
AerolumeTM. Collection. Area Luminaires 3 Fixture Sizes W HID 64/80/120
Aerolume Collection Area Luminaires Fixture Sizes 70-00W HID 64/80/ Overview Mini-Aerolume Aerolume Aerolume-G 1." (4.9mm) 18" (47.mm) " (84.mm) 6." (16.1mm) 19" (48.6mm) 4" (1.4mm) 8" (0.mm) " (84.mm)
RSS SERIES R S S. Fluorescent Lighting for Hazardous Locations
RSS SERIES Fluorescent Lighting for Hazardous Locations R S S Class I, Division 2, Groups A, B, C & D UL 844 Hazardous Location UL 1598A Marine Outside Type CUL Wet Locations IP66 55 Ambient Temperature
Dual Lamp Ceramic Metal Halide 3 Lumen Packages in 1 Luminaire
Dual Lamp Ceramic Metal Halide 3 Lumen Packages in 1 Luminaire For additional configurations see our Product Catalog or visit our website at WINDIRECT TM 3 in1 Dual Lamp Ceramic Metal Halide CMH x 2 1
ORDERING INFORMATION: 120 Volts (120) 208 Volts (208) 240 Volts (240) 277 Volts (277) 480 Volts (480)
Del Mar Corrosion resistant, Weather Tight Unit fabricated from spun Aluminum.080 Thick, Full Gasket Keeps out insects and Water. Lens & Removable Door Assembly: Hinged Door Assembly Formed from One Piece
DECORATIVE. Tear Drop Series
DECORATIVE Tear Drop Series D ECORATIVE Product Catalog Tear Drop Series Styled to replicate the tear drop luminaires that illuminated boulevards during the first half of the century, the Holophane Tear
Linear Fluorescent Highbays. A comprehensive selection of high output commercial/industrial fluorescent lighting
Linear Fluorescent Highbays A comprehensive selection of high output commercial/industrial fluorescent lighting Linear Fluorescent Highbay Lighting T-Series Full Body, Specification Grade Fluorescent Highbay
DESCRIPTION & APPLICATION
T5 FME T5 4L - Full Body High Bay DESCRIPTION & APPLICATION The Envirobrite FME T5 fixture is a full body fluorescent high bay ideal for replacing energy devouring HID fixtures. This all aluminum enclosed
ELA Low Wattage HID Series Element Acrylic High Bay, W HID
Type No. Catalog No. Job. Name APPLICATIONS Applications include large and small retail facilities, lobbies, conference rooms, auditoriums and other commercial and light industrial spaces. CONSTRUCTION
Vaporproof Strip - 4 Foot 1-3 Lamps
Vaporproof Strip - 4 Foot - 3 Lamps 2.23 Applications Entrance Lighting Car Washes Public Access Parking Structures Certifications 4.3 500 Guardian PSI seal Dimensional Drawings Beverage Industry Food
Visor Compact Architectural LED Wallpack. Technical Specifications VISOR TM. Visor Configuration Information. Project Catalog Number Type Date
VISOR TM led wallpack Visor compact architectural LED wallpacks replace up to 250W pulse start metal halide wall-mounted fixtures in perimeter, security, and entrance way applications while consuming up
ELG CosmoPolis / MasterColor Elite HID Series Element Enclosed Glass High Bay, watt
Type No. Catalog No. Job. Name ELG CosmoPolis / MasterColor Elite HID Series APPLICATIONS Applications include large and small retail facilities, lobbies, conference rooms, auditoriums and other commercial
Form 35 Malleable Iron Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum and IMC Conduit.
NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing. Connect and change direction of conduit runs. Allow connections
Test Sample Description Catalog Number: Description:
Project Number Date 15.00487 3/26/2015 LAB 6 Test Sample Description Catalog Number: Description: P3408-0930K9 Close to Ceiling fixture Test Method: Preburn Time: Time To Stabilize: Total Operating Time:
Overall Dimensions. Specifications
Overall Dimensions EFX B EFX VM Vertical Mount C 13 housing (70-400W) 19 housing (450-1000W) E D H B C D E 13.3 16.8 16.2 7.0 9.8 (33.78cm) (42.67cm) (41.15cm) (17.78cm) (24.89cm) F G H I J 22.2 11.3 6.3
CRYSTALGLO. Holophane s potted ballast provides good thermal dissipation and sound absorption, for long life and quiet operation.
CRYSTALGLO The CrystalGlo luminaire is an innovative, attractive x recessed or surface mounted luminaire for commercial, retail, industrial, school or institutional applications. The drop prismatic glass
FULL CUTOFF DARK SKY COMPLIANT FIXTURES. commercial & architectural lighting
FULL CUTOFF DARK SKY FIXTURES commercial & architectural lighting WHAT IS LIGHT POLLUTION? Quite simply, light pollution is excessive or obtrusive artificial light. Around the world, the night sky is disappearing