LED FLOOD LIGHT SOLUTIONS Harsh and Hazardous Products

Transcription

1 LED FLOOD LIGHT SOLUTIONS Harsh and Hazardous Products

2 Ex- LED Lighting and Control Switches

3 KILLARK LED FLOOD LIGHTS H A Z LO C INDEX PRODUCT PAGE NO. NEMA 4 (or 4X or IP66) Class I, Div. 2 / Zone 2 Class I, Zone 2 Ex nr Class II / III Div. I Class II / III Div. 2 Class I, Div. 1 C, D / Zone 1 Class I, Div. 1 A, B, C, D / Zone 1 IECEx Zone 1 ATEX Zone 1 IECEx Zone 2 ATEX Zone 2 KFLC Series X X X X KFL Series X X X X X X KFLH Series X X X X X X KF1L Series X X X X X X X X X Lighting Switches SEE SOFTWARE FOR LATEST LED PHOTOMETRY i

4 KILLARK Z A H LO C KFLC SERIES COMPACT FLOOD INTRODUCTION & LOGIC LED TECHNOLOGY Class I, Div. 2, Groups A,B,C,D Class I, Zone 2, Groups IIC, IIB, IIA Class II, Div. 1 & 2, Groups E,F,G Class III NEMA 4X File LR11713 FEATURES-SPECIFICATIONS Applications LED Compact Floods are designed for installations where moisture, dirt, dust, corrosion and vibration may be present, or NEMA 3 and 4X areas where wind, water, snow or high ambients can be expected. They can be used in locations made hazardous by the presence of flammable vapors or gases or combustible dusts as defined by the NEC. Typical applications include spot lighting or walkways in manufacturing plants, and certain chemical and petrochemical processing facilities, sewage treatment plants, off-shore and dockside installations, garages and storage facilities Compliances UL-8750 for LED lighting ANSI/UL 1598 (A) UL-844 Standard for lighting fixtures for hazardous locations, Class I, Division 1; Class II, Division 1; Class III CSA C22.2 no. 137-M1981 electric luminairies for use in hazardous locations Enclosed and gasketed NEMA 3, 4X, IP66 Materials LED Body and lens frame corrosion resistant copper-free aluminum alloy with baked powder epoxy/polyester finish, electrostatically applied for complete, uniform corrosion protection All external hardware stainless steel Thermal shock and impact resistant extra heavy-duty glass lens High temperature silicone gasketing Trunnion heavy gauge galvanized steel with painted finish LED Flood Features and Standards One 3/4 NPT hub & R-21 3/4 x 1/2 reducer is standard Crisp White Light for Excellent Color Rendering Chromaticity 5000 K (CCT); approx. 70 CRI Energy Savings High lumens per watt Long Life 100,000+ maintenance free hours to 70% initial lumens Ambient suitability -40 C to 55 C Instant On Including after power interruption Solder-LESS LED Board Connections Vibration Resistant LM80-08* Measurement of lumen maintenance for LED light sources LM79-08* Certified Absolute Photometry, including Chromaticity Color for Solid State Lighting L70 Values Industry Nomenclature for Hours of use to 70% of initial Lumens TM-21* & calculated Patented Fixture Design KFLC with Slipfitter mount on 2 pipe Dark Sky Visor KFLC-DARK * LM-xx & TM-xx are illumination Engineering Society Standards designed to promote uniformity in testing procedures among test labs and manufacturers. For more information go to Catalog Number Logic KFLC X X KFLC - Series Constant LED Wattage 15-15W 30, 27 or 34 voltage codes 18-18W 30, 27 or 34 voltage codes 20-20W 30, 27 or 34 voltage codes 23-23W 30, 27 or 34 voltage codes 25-25W 30, 27 or 34 voltage codes 30-30W 30 voltage code VAC 35-35W 30 voltage code VAC 40-40W 30 voltage code VAC 45-45W 30 voltage code VAC 50-50W 30 voltage code VAC Voltage VAC 50/60Hz VDC input Options LY- Less Yoke for Wall Mount F- Single Fuse j FF- 2 Fuses j SP- Surge Protection TBL- Terminal Blocks Looping QD- QuickDisconnect D75- Dual 3/4 threaded NPT entry M25- Single M25 Slip-hole Entry D25- Two M25 Slip-hole Entry M20- Single M20 Slip-hole Entry D20- Dual M20 Slip-hole Entry VDC input; VAC (15-23W only) PL- Polycarbonate Lens j Fusing not for Canadian Marine Installations 2

5 KILLARK KFLC SERIES H A Z LO C COMPACT FLOOD ORDERING & TECHNICAL DATA ORDERING INFORMATION AND AMBIENT SUITABILITY C1D2 C1D2 C2D1 L70 CATALOG NO. WEIGHT LBS./KG WATTS VOLTAGE AMPS LUMENS 40 C 55 C 40 C 55 C 40 C 55 C TM-21 CALCULATED KFLC VDC KFLC VAC KFLC VDC KFLC VDC KFLC VAC KFLC VDC KFLC VDC KFLC VAC KFLC VDC KFLC VDC / 4.31 KFLC VAC KFLC VDC KFLC VDC KFLC VAC KFLC VDC KFLC Extra high lumen per watt LED s * KFLC 30-50w Lumens are LM-79 absolute photometry W are calculated based on driver output current. ** All wattages are available as 30 voltage code VAC T6 T6 T4 T3B T4A T4A T6 T6 T4 T3B T4A T4A T6 T6 T4 T3B T4A T4A T6 T6 T4 T3B T4A T4A T6 T6 T4 T3B T4A T4A T6 T6 T4 T3B T4A T4A KFLC T6 T6 T4 T3B T4A T4A KFLC VAC T6 T6 T4 T3B T4A T4A KFLC T6 T6 T4 T3B T4A T4A KFLC T6 T6 T4 T3B T4A T4A Dimensions ** TM-21 based values require very long duration testing. IES TM-21 official reported is based on at 8,000 to 10,000 hours of LED chip manufacturer s LM-80 Testing at printing. Trunnion Mounting Detail SLIPFITTER CROSS ARM MOUNT WALL/PIPE BRACKET WALL BRACKET 4041 TENON FITTING CATALOG NUMBER KFL MOUNTS AND ACCESSORIESj DESCRIPTION KFLC-DARKk Reflector for field addition - No uplight at 45 to 70 KFLCG KFLC-DOORk Guard Replacement Door Assembly NWP-HUBA 3/4 Aluminum Hub; Replacement or Additional (Max. 4) VMSC10l Safety Cable (through yoke) Steel Slipfitter for 2 Pipe (2-3/8 o.d.) Tenon. Slips 3.75 Over Pipe. Heavy Duty Cast-Iron Crossarm Fitting for Horizontal Trunnion Heavy Duty Wall Mount and/or Pipe Clamp Fitting Clamps 2 Pipe (2-3/8 o.d.) Through 2-1/2 Pipe (2-7/8 o.d.) Heavy Duty Steel Wall Bracket. (Must be with Crossarm Fitting) Heavy Duty Steel Wall Bracket 2 Pipe (2-3/8 o.d.) Tenon Fitting. j Fittings available to adapt trunnion mount floodlights to crossarms, poles and walls. Must be ordered separately. k Drop limit 1. Attaches to luminaire cable provision and to mounting structure. l Designed to eliminate uplight when aimed at 70. Front Side SEE SOFTWARE FOR LATEST LED PHOTOMETRY 3

6 KILLARK Z A H LO C KFL SERIES FEATURES-SPECIFICATIONS Applications LED Floods are designed for installations where moisture, dirt, dust, corrosion and vibration may be present, or NEMA 3 and 4X areas where wind, water, snow or high ambients can be expected. They can be used in locations made hazardous by the presence of flammable vapors or gases or combustible dusts as defined by the NEC. Typical applications include manufacturing plants, and certain chemical and petrochemical processing facilities, sewage treatment plants, off-shore and dockside installations, garages and storage facilities. Compliances UL-8750 for LED lighting ANSI/UL 1598(A) UL-844 Standard for lighting fixtures for hazardous locations, Class I, Division 2; Class II, Divisions 1 and 2; Class III CSA C22.2 no. 137-M1981 electric luminairies for use in hazardous locations Enclosed and gasketed NEMA 3, 4X IP66 IEX suffix Zone 2/21 to IEC , , Standards Materials Body, end caps and lens frame corrosion resistant copper-free aluminum alloy with baked powder epoxy/polyester finish, electrostatically applied for complete, uniform corrosion protection All external hardware - stainless steel Thermal shock and impact resistant glass lens High temperature silicone gasketing C1D2 FLOOD INTRODUCTION & LOGIC LED Trunnion heavy gauge galvanized steel with painted finish LED Flood Features and Standards Crisp White Light for Excellent Color Rendering - Chromaticity 5000K (CCT); approx. 70 CRI Energy Savings - High lumens per watt Long Life - to 100,000+ maintenance free hours to 70% initial lumens Ambient suitability -50 C to 55 C up to 125Wk Instant On - Including after power interruption World Voltage VAC 50/60Hz Solder-LESS LED Board Connections - Vibration Resistant LM80-08* Measurement of lumen maintenance for LED light sources LM79-08* Certified Absolute Photometry, including Chromaticity Color for Solid State Lighting L70 Values - Industry Nomenclature for Hours of use to 70% of initial Lumens - TM-21* & Calculated Supplemental surge protection included as standard for AC models only Class I, Div. 2, Groups A,B,C,D Class II, Div. 1&2, Groups EFG Class III Suitable for wet locations Marine Rated (US Only) NEMA 3, 4X IP66 IEC Ex Rated model (w/iex suffix) Zone 2 and Zone 21 areas Ex na IIC T6 T3, Gc Ex tb IIIC T160 C Db Tamb -50 C <Ta<+55 C, IP66 IECEx Certificate CSA X ATEX CML 14ATEX3087/4088 PATENTED LUMINAIRE DESIGN File LR11713 KFL with Slipfitter mount on 2 pipe * LM-xx & TM-xx are illumination Engineering Society Standards designed to promote uniformity in testing procedures among test labs and manufacturers. For more information go to IEX Units include Qty. 3 6mm terminals plus external ground as standard Catalog Number Logic KFL XX KFL - Series Constant Fixture Wattage W W W W W W W W W W W Consult website for current list of approved luminaires Dark Sky Visor KFL-DARK Voltage VAC 50/60Hz VAC 60Hz (85W to 125W models)k VDC (85W to 125W models) Options Construction Note: Models with dual metric entries are tapped with one plugged and the standard 3/4 NPT entry will be plugged. PL - Polycarbonate Lens F - Single Fusej j Fusing not for Canadian or Marine Installations FF - Double Fusej k 347V-480V +40 C Max TBL - Terminal Blocks Looping (Std. w/iex) P1-120V Photocell, factory installed P2-208V-277V Photocell, factory installed P3-347V Photocell, factory installed QD - Quick Disconnect D20-2x M20 entries D25-2x M25 entries D75-2 x 3/4 NPT SY SS Yoke IEX - IECEx & ATEX includes TBL and External Ground (to 125W) 4

7 KILLARK KFL SERIES H A Z LO C CATALOG NO.j KFL06030 C1D2 FLOOD ORDERING INFORMATION & TECHNICAL DATA ORDERING INFORMATION AND AMBIENT SUITABILITY WEIGHT LBS./KG C1D2m C1D2m SIMULTANEOUS j Cat. nos. are VAC models, see logic for V. k Amperage measured at 120VAC; 277VAC calculated l Extra high Lumens per Watt LED models m Use 75 minimum Supply C Ambient; C Ambient n First number is lens temperature under 25mm layer of dust; Second number is lens temp. for dust cloud. C2D1m IEC ZONE 2 m IEC ZONE 21n AMPS WATTS VOLTAGE LUMENSl 40 C 55 C 40 C 55 C 40 C 55 C 40 C 55 C 40 C 55 C TM-21 CALCULATED jk VAC T6 T5 T3C T3C T3C (EFG) T3C (EFG) T6 T KFL VAC T6 T5 T3C T3C T3C (EFG) T3C (EFG) T6 T KFL VAC T6 T5 T3C T3C T3C (EFG) T3C (EFG) T6 T KFL VAC KFL VAC KFL VDC KFL VAC KFL VAC KFL VDC KFL VAC / KFL VAC KFL VDC KFL VAC KFL VAC KFL VDC KFL VAC KFL VAC KFL VDC T6 T5 T3C T3C T3C (EFG) T3C (EFG) T6 T T6 T5 T3C T3C T3C (EFG) T3C (EFG) T6 T T4A T4A T3C T3C T3C (EFG) T3C (EFG) T4 T T6 T5 T3C T3C T3C (EFG) T3C (EFG) T6 T T6 T5 T3C T3C T3C (EFG) T3C (EFG) T6 T KFL VAC T5 - T3C - T3C (EFG) KFL VAC T5 - T3C - T3C (EFG) KFL VAC T5 - T3C - T3C (EFG) Dimensions [450.9] [377.8] L [287.6] Slipfitter Cross Arm Mount Wall/Pipe Bracket Wall Bracket 4041 Tenon Fitting KFL MOUNTS AND ACCESSORIESj CATALOG NUMBER DESCRIPTION Steel Slipfitter for 2 Pipe (2-3/8 o.d.) Tenon. Slips 3.75 Over Pipe. Heavy Duty Cast-Iron Crossarm Fitting for Horizontal Trunnion Heavy Duty Wall Mount and/or Pipe Clamp Fitting Clamps 2 Pipe (2-3/8 o.d.) Through 2-1/2 Pipe (2-7/8 o.d.) Heavy Duty Steel Wall Bracket. (Must be with Crossarm Fitting) Heavy Duty Steel Wall Bracket 2 Pipe (2-3/8 o.d.) Tenon Fitting. Uses with. KFLGo VMSC10k KFL-DARKlo KFL-DOOR KFL-DOOR2mn Wire Guard, 316 Stainless Steel (not used with KFL-DARK) 10 Stainless Steel Safety Cable with loop grip Dark Sky Visor, White Painted Aluminum (not used with KFLG) Replacement Door and Lens Assembly (for units w/o internal reflectors) Replacement Internal Reflector and Lens Assembly j Fittings available to adapt trunnion mount floodlights to crossarms, poles and walls. Must be ordered separately. k Drop limit 1. Attaches to luminaire cable provision and to mounting structure. l Designed to eliminate uplight when aimed at 45. m Only for models factory supplied with internal reflector. n Not backward compatible with units originally shipped without internal reflector. o KFLG and KFL-DARK cannot be used together..531 DIA. (13) 3-1/8 (79) Front Trunnion Mounting Detail 5.22 [132.7] 2.00 [50.8] Side 8.41 [213.5] [357.3] SEE SOFTWARE FOR LATEST LED PHOTOMETRY 5

8 KILLARK Z A H LO C KFLH SERIES FEATURES-SPECIFICATIONS Applications LED Floods are designed for installations where moisture, dirt, dust, corrosion and vibration may be present, or NEMA 3 and 4X areas where wind, water, snow or high ambients can be expected. They can be used in locations made hazardous by the presence of flammable vapors or gases or combustible dusts as defined by the NEC. Typical applications include manufacturing plants, and certain chemical and petrochemical processing facilities, sewage treatment plants, off-shore and dockside installations, garages and storage facilities. Compliances UL-8750 for LED lighting ANSI/UL 1598(A) UL-844 Standard for lighting fixtures for hazardous locations, Class I, Division 2; Class II, Divisions 1 and 2; Class III CSA C22.2 no. 137-M1981 electric luminairies for use in hazardous locations Enclosed and gasketed NEMA 3, 4X IP66 Materials Body and lens frame corrosion resistant copper-free aluminum alloy with baked powder epoxy/polyester finish, electrostatically applied for complete, uniform corrosion protection All external hardware stainless steel Thermal shock and impact resistant glass lens (Polycarbonate available) High temperature silicone gasketing Trunnion heavy gauge 316 stainless steel C1D2 FLOOD INTRODUCTION & LOGIC LED LED Flood Features and Standards Crisp White Light for Excellent Color Rendering Chromaticity 5000K (CCT); approx. 70 CRI Energy Savings High lumens per watt Long Life to 100,000+ maintenance free hours to 70% initial lumens Ambient suitability -40 C to 55 C up to 250Wk to -50 C for non-hazardous applications Instant On Including after power interruption World Voltage VAC 50/60Hz Solder-LESS LED Board Connections Vibration Resistant LM80-08* Measurement of lumen maintenance for LED light sources LM79-08* Certified Absolute Photometry, including Chromaticity Color for Solid State Lighting L70 Values Industry Nomenclature for Hours of use to 70% of initial Lumens TM-21* & Calculated Class I, Div. 2, Groups A, B, C, D Class I, Zone 2, IIC, IIB, IIA Class II, Div. 1 & 2, Groups E, F, G Class III Suitable for wet locations Marine Rated (US only) NEMA 3, 4X IP66 IEC Ex Rated Model (w/ IEX suffix) Zone 2 and Zone 21 areas Ex na IIC T6 T3, Gc Ex tb IIC T105 C Db Tamb -50 C < Ta < +55 C, IP66 IECEx Certificate QPS ATEX Certificate CML 15ATEX4079X (na) & CML 15ATEX3080X (tb) PATENTED LENS and REFLECTOR DESIGN KFLH Luminaire Catalog Number Logic KFLH XX KFLH - Series Constant Fixture Wattage W W W W W W Dark Sky Visor KFLH-DARK Voltage VAC 50/60Hz VAC 60Hz (170W to 250W)k VDC (170W to 250W) Options PL - Polycarbonate Lens F - Single Fusej FF - Double Fusej TBL - Terminal Blocks Looping P1-120V Photocell, factory installed P2-208V-277V Photocell, factory installed P3-347V Photocell, factory installed QD - Quick Disconnect D20-2x M20 entries IEX - IEXEx includes TBL & External ground * LM-xx & TM-xx are illumination Engineering Society Standards designed to promote uniformity in testing procedures among test labs and manufacturers. For more information go to Supplemental surge protection included as standard for AC models only Construction Note: Standard with two 3/4 NPT entries with one plugged Models for dual metric entries have slip holes with metric locknuts and certified blanking plugs j Fusing not for Canadian or Marine Installations k 347V-480V +40 C Max 6

9 KILLARK KFLH SERIES H A Z LO C C1D2 FLOOD ORDERING INFORMATION & TECHNICAL DATA ORDERING INFORMATION AND AMBIENT SUITABILITY C1D2 (C1Z2) C1D2 SIMULTANEOUS C2D1 L70 CATALOG NO. WEIGHT LBS./KG WATTS VOLTAGE AMPS LUMENS 40 C 55 C 40 C 55 C 40 C 55 C TM-21 CALCULATED KFLH VAC KFLH VAC KFLH VDC KFLH VAC KFLH VAC KFLH VDC KFLH VAC / 11.3 KFLH VAC KFLH VDC KFLH VAC KFLH VAC KFLH VDC j Cat. Nos. are 120 through 277VAC 50/60Hz; see logic for V or VDC input k Amperage measured at 120VAC; 277VAC calculated l Extra High Lumens per Watt LED Models m Use 75 C Supply 40 C Ambient; 90 C 55 C Ambient n 55 C only for 170W through 250W at VAC 50/60Hz or VDC; not 480VAC o For Dust Applications, limit aiming angle between 120 and -120 to minimize buildup - see figure at right p L70 is time in hours to 70% of initial lumens remaining. TM-21 based values require very long duration testing and is denoted official reported and is based on at least 6,000 minimum, to 12,000 hours testing (at time of printing). Calculated values by the major chip vendors utilized predict L70 life up to 278,000 hours T4A (T4) T4 T4 T3C T4 T3C T4A (T4) T4 T4 T3C T4 T3C T4A (T4) T4 T4 T3C T4 T3C T4A (T4) T4 T4 T3C T4 T3C KFLH VAC T4A (T4) T KFLH VAC T4A (T4) T p Dust Aiming Angles KFLH MOUNTS AND ACCESSORIESj CATALOG NUMBER DESCRIPTION Steel Slipfitter for 2 Pipe (2-3/8 o.d.) Tenon. Slips 3.75 Over Pipe. Heavy Duty Cast-Iron Crossarm Fitting for Horizontal Trunnion Heavy Duty Wall Mount and/or Pipe Clamp Fitting Clamps 2 Pipe (2-3/8 o.d.) Through 2-1/2 Pipe (2-7/8 o.d.) Heavy Duty Steel Wall Bracket. (Must be with Crossarm Fitting) Heavy Duty Steel Wall Bracket 2 Pipe (2-3/8 o.d.) Tenon Fitting. Use with. KFLG VMSC10k KFLH-DARKl KFLH-DOOR Wire Guard, 316 Stainless Steel (order 2 per fixture) 10 Stainless Steel Safety Cable with loop grip Dark Sky Visor, White Painted Aluminum Replacement Internal Reflector and Lens Assembly (order 2 per fixture as required) j Fittings available to adapt trunnion mount floodlights to crossarms, poles and walls. Must be ordered separately. k Drop limit 1. Attaches to luminaire cable provision and to mounting structure. l Designed to eliminate uplight when aimed at 45. Slipfitter Wall Bracket Wall/Pipe Bracket Cross Arm Mount 4041 Tenon Fitting SEE SOFTWARE FOR LATEST LED PHOTOMETRY 7

10 KILLARK Z A H LO C KF1L SERIES C1D1 FLOOD INTRODUCTION & LOGIC Class I, Div. 1&2, Groups B,C,D Class I, Zone 1&2, Groups IIB+H2, IIA Class II, Div. 1&2, Groups EFG, Class III Enclosure Type 4X, IP66 (-50 C to +55 C) File LR11713 LED FEATURES-SPECIFICATIONS Applications LED KF1L Series Explosion-proof Floods are designed for installations where moisture, dirt, dust, corrosion and vibration may be present, or NEMA 3 and 4X areas where wind, water, snow or high ambients can be expected. They can be used in locations made hazardous by the presence of flammable vapors or gases or combustible dusts as defined by the NEC. Typical applications include manufacturing plants, and certain chemical and petrochemical processing facilities, sewage treatment plants, off-shore and dockside installations, garages and storage facilities Compliances UL-8750 for LED lighting ANSI/UL 1598A UL-844 Standard for lighting fixtures for hazardous locations, Class I, Division 1; Class II, Division 1; Class III CSA C22.2 no. 137-M1981 electric luminairies for use in hazardous locations IEX or IEX4B suffix for Zone 1 and Zone 21 to IEC , , , Standards Enclosed and gasketed NEMA 3, 4X IP66 Materials Body, end caps and lens frame corrosion resistant copper-free aluminum alloy with baked powder epoxy/polyester finish, electrostatically applied for complete, uniform corrosion protection All external hardware - stainless steel Thermal shock and impact resistant extra heavy-duty glass lens High temperature silicone gasketing Trunnion heavy gauge 316 SS LED Flood Features and Standards Factory Sealed Construction One 3/4 NPT & one M20 entry standard (see logic for other choices) Supplemental surge protection (AC models VAC only) and looping terminals are standard Crisp White Light for Excellent Color Rendering Chromaticity 5000 K (CCT); approx. 70 CRI Energy Savings High lumens per watt Long Life 100,000+ maintenance free hours to 70% initial lumens Instant On Including after power interruption World Voltage VAC 50/60Hz Solder-LESS LED Board Connections Vibration Resistant LM80-08* Measurement of lumen maintenance for LED light sources LM79-08* Certified Absolute Photometry, including Chromaticity Color for Solid State Lighting L70 Values Industry Nomenclature for Hours of use to 70% of initial Lumens TM- 21* & calculated IEC Ex Rated model (w/iex or IEX4B suffix) Zone 1, Zone 21 Ex de IIB+H2 T6..T5, Gb, IP66 Tamb -20 C Ta +55 C; Option LT for -50 C Ta +55 Cj Ex de IIB T6..T5, Gb, -50 C Ta +55 Cj Ex tb IIIC T90 C Db, -50 C Ta +55 Cj Certificate IECEX CSA ATEX Certificate SIRA14ATEX1159X Patent Pending Fixture Design KF1L with Slipfitter mount on 2 pipe Dark Sky Visor KF1L-DARK Catalog Number Logic KF1L XX KF1L - Series Constant Fixture Wattage W W W W W W W Voltage VAC 50/60Hz VAC 60Hz (90W-125W) VDC (90W-125W) Options IEX4B - Four bolt termination cover (see Note 1) LT - For -50 C to +55 C, IEC Zone 1 (see Note 1) F - Single Fuse FF - Double Fusek D20 - Dual M-20 Entries D25 - Dual M-25 Entries D75 - Dual 3/4 NPT Suitable for Paint Spray * LM-xx & TM-xx are illumination Engineering Society Standards designed to promote uniformity in testing procedures among test labs and manufacturers. For more information go to j Construction/Certification Notes: KF1L units are standard with one 3/4 NPT hub & one M20 hub both plugged, with an 8-bolt factory sealed termination chamber, suitable for CID1 BCD -50 C to +55 C and IEC Zone 1 Ex de suitable for -20 C to 55 C. Use option LT for models needing IEC Zone 1, -50 C to +55 C suitability for hydrogen. Option IEX4B utilizes 4 terminal cover bolts for Ex de and maintains all ratings EXCEPT CID1 BCD. See logic for other entry options k Fusing not for Canadian or Marine Installations 8

11 KILLARK KF1L SERIES H A Z LO C j Yellow highlighted models have extra high lumen LED s. k See logic for V availability l Amperage measured at 120VAC; 277VAC calculated m Use minimum 75 Supply C Ambient; C Ambient n CID1 40 /55 & C2D1 40 C use Aiming Figure A below. C1D1 FLOOD ORDERING & TECHNICAL DATA ORDERING INFORMATION AND AMBIENT SUITABILITY C1D1 C2D1 IEC ZONE 1 IEC ZONE 21 L70 CATALOG NO. WEIGHT LBS./KG WATTS VOLTAGE AMPS LUMENS 40 C 55 C 40 C 55 C 40 C 55 C 40 C 55 C TM-21 CALCULATED KF1L VAC KF1L VAC KF1L VDC KF1L VAC KF1L VAC KF1L VDC KF1L VAC KF1L / VAC KF1L VDC KF1L VAC KF1L VAC KF1L VDC T6 T6 (EFG) o T6 T T6 T6 (EFG) o T6 T T6 T6 (EFG) o T6 T T6 T6 (EFG) o T6 T KF1L VAC T T KF1L VAC T T KF1L VAC T T o 55 C C2D1 EFG T3C Aiming Figure B, 55 C2D1 EF T3A Aiming Figure A p First number is lens temperature under 25mm layer of dust; Second number is lens temp for dust cloud. ** TM-21 based values require very long duration testing. IES TM-21 official reported is based on at 8,000 to 10,000 hours of LED chip manufacturer s LM-80 Testing at printing. Dimensions [397.4] [317.5] 2.52 [64.0] 6.91 [175.5] 4.27 [108.5].531 DIA. (13) 3-1/8 (79) Aiming Figures See Notes n & o 9.36 [237.7] 5.30 [134.7] Trunnion Mounting Detail [450.9] Front Side 2.00 [50.8] KFL MOUNTS AND ACCESSORIESj CATALOG NUMBER DESCRIPTION Steel Slipfitter for 2 Pipe (2-3/8 o.d.) Tenon. Slips 3.75 Over Pipe. Heavy Duty Cast-Iron Crossarm Fitting for Horizontal Trunnion Heavy Duty Wall Mount and/or Pipe Clamp Fitting Clamps 2 Pipe (2-3/8 o.d.) Through 2-1/2 Pipe (2-7/8 o.d.) Heavy Duty Steel Wall Bracket. (Must be with Crossarm Fitting) Heavy Duty Steel Wall Bracket 2 Pipe (2-3/8 o.d.) Tenon Fitting. KFLG VMSC10 KF1L-DARK KF1L-DOOR Wire Guard, 316 Stainless Steel 10 Stainless Steel Safety Cable with loop gripk Dark Sky Visor, White Painted Aluminuml Replacement Door and Lens Assembly j Fittings available to adapt trunnion mount floodlights to crossarms, poles and walls. Must be ordered separately. k Drop limit 1. Attaches to luminaire cable provision and to mounting structure. l Designed to eliminate uplight when aimed at 45. Slipfitter Wall Bracket Wall/Pipe Bracket Cross Arm Mount 4041 Tenon Fitting SEE SOFTWARE FOR LATEST LED PHOTOMETRY 9

12 KILLARK CONTROLS CONTROLS Z A H LO C XS/XST SERIES TUMBLER SWITCH Class I, Div. 1 & 2, Groups C, D Class l, Zones 1 & 2, Groups llb, lla Class II, Div. 1 & 2, Groups E, F, G Class Ill NEMA 7 (C, D) 9 (E, F, G) - FILE E53360 Certified - File LR11712 File OP7A5.AE See files for details or call Killark. Applications Used where making, breaking, or changing connections in an electric circuit are required. Features XS-3C FEATURES-SPECIFICATIONS XS and XST Series are front lever rotary operated switch assemblies with standard provisions for padlocking in either ON or OFF position. The lever is connected to a threaded stainless steel shaft which passes through the cover. WITH DEVICE XS-1C XS-2C XS-8C XS-3C XS-5C XS-6C XS-7C XS-1D XS-2D Complete Unit When Assembled COVER WITHOUT DEVICE XNS-1C XNS-2C XNS-8C XNS-3C XNS-5C XNS-6C XNS-7C XNS-1D XNS-2D XS TUMBLER SWITCH CATALOG NUMBER COMPLETE UNITS (BOX, COVER AND SWITCH) HUB SIZE DEAD-END FEED-THRU 1/2 XS-11C XS-41C 3/4 XS-21C XS-51C 1/2 XS-12C XS-42C 3/4 XS-22C XS-52C 1/2 XS-18C XS-48C 3/4 XS-28C XS-58C SWITCH STYLE 1-POLE 2-POLE 3-POLE 1/2 XS-13C XS-43C 3-WAY/ SPDT 3/4 XS-23C XS-53C No center off 1/2 XS-15C XS-45C SPDT 3/4 XS-25C XS-55C Center off 1/2 XS-16C XS-46C DPDT 3/4 XS-26C XS-56C No center off 1/2 XS-17C XS-47C DPDT 3/4 XS-27C XS-57C Center off 1/2 XS-11D XS-41D 3/4 XS-21D XS-51D 1/2 XS-12D XS-42D 3/4 XS-22D XS-52D 1-POLE 2-POLE SWITCH RATING 120/277 VAC, 1Ø 20Ak 20Ak j 20Ak 20Ak 20Ak 20Ak 30Ak 30Ak XS-4C 4-WAY 20Ak j Rated 15 amperes, 240/480 VAC., 3Ø: 3HP-240 VAC., 5 HP-480 VAC. k Horsepower rated 1 HP at 120VAC, 2 HP at 240VAC. Certified - File LR11712 HUB SIZE XS TUMBLER SWITCH CATALOG NUMBER COMPLETE UNITS SWITCH STYLE (BOX, COVER AND SWITCH) DEAD-END FEED-THRU 3/4 XST15-21C XST15-51C 1 XST15-31C XST15-61C 3/4 XST20-21C XST20-51C 1 XST20-31C XST20-61C 1-Pole 1-pole 3/4 XST15-23C XST15-53C 3-way/spdt No center 1 XST15-33C XST15-63C off 3/4 XST20-23C XST20-53C 3-way/spdt No cover 1 XST20-33C XST20-63C off SWITCH RATING 347 VAC, 1Ø 15a 20a 15a 20a 10

13 KILLARK CONTROLS CONTROLS HKH SERIES H A Z LO C SIZE 1 NON-METALLIC 2 POLE ROCKER SWITCH FEATURES-SPECIFICATIONS ATEX/IECEx Certified 0539 II 2 G Ex de IIC T4 Gb 0539 II 2 D Ex tb IIIC T4 Db IP66 DEMKO 15 ATEX 1405X Ex de IIC Gb Ex tb IIIC Db IP66 IECEx UL X Ambient Range: -45ºC < Ta < 60ºC culus Certified Class I, Zone 1, AEx de IIC Gb / Ex de IIC Gb X Zone 21, AEx tb IIIC Db IP66 / Ex tb IIIC Db IP66 X Class I, Division 2, Groups A, B, C, D Class II, Division 1, Groups E, F, G (Canada Only) Class II, Division 2, Groups E, F, G Class III UL50, 50E, 508, UL , -1, -7, -31 Type 3, 4, 4X, 12, 13 Ambient Range: -45ºC < Ta < 60ºC Rocker Switch Single Throw Double Pole Luminous fluorescent strip supplied for ease of locating. One entry listed is located at bottom. Contact Block Features: UL Electrical Rating: 690Vac, 20A, 50-60Hz, 60Vdc, 5A, 110Vdc, 2A, 255Vdc, 1.5A, 1/2 1 HP@208/240/277Vac, A600/P600- Pilot Duty 350Vac- Tungsten Lamp. Wire Allowances: WIRE RANGE with 1 or 2 WIRES: #22 to #12 AWG (SOL & STR) and #10 AWG (STR). IEC Electrical Ratings: AC690V 16A AC-12, Hz, AC230V 16A AC-15, 50-60Hz, DC60V 5A DC-12, DC125 1A DC-12. Wire Allowances: WIRE RANGE with 1 or 2 WIRES: 0.5 to 2.5mm (SOL & STR) and 4.0mm 2 (STR) Silver Alloy contacts with Gold Flashing. Enclosure depth 4.5 (114mm) HKH ROCKER SWITCH MAINTAINED IN 2 POSITIONS CATALOG NUMBER CONTACT ARRANGEMENT ENTRY SIZE DIN RAIL MOUNT IEC NEMA HKH1AND2RS4K8 3/4 NPT SS HUB HKH1ANDARS4 M20 Clearance hole CONTACT BLOCKS 2 N.O. HKH ROCKER SWITCH MAINTAINED IN 2 POSITIONS CATALOG NUMBER CONTACT ARRANGEMENT ENTRY SIZE DIN RAIL MOUNT IEC NEMA CONTACT BLOCKS HKH1AND2RS1K8 HKH1ANDARS1 3/4 NPT SS HUB M20 Clearance hole N.C. / 1 N.O. 11

14 3940 Dr. Martin Luther King Drive St. Louis, MO TEL: (314) FAX: (314) Hubbell Canada LP 870 Brock Road South Pickering, Ontario L1W 1Z8 (905) Hubbell de Mexico Av. Insurgentes Sur 1228, Piso 8 Col. Tlacoquemécatl Del Valle C.P , Mexiso D.F. Tel: (01 52) info@hubbell.com.mx Hubbell Electrical Systems A Division of Hubbell, Inc. (Delaware) HKMC-FLOOD 2015 Hubbell Electrical Systems Printed in U.S.A.