MOGUL BASE HID FIXTURES
|
|
|
- Brett Wright
- 6 years ago
- Views:
Transcription
1 KILLARK Z A H LO C MOGUL BASE HID FIXTURES Class I, Div. 1 & 2 Groups C,D Class l, Zone 1 & 2, Groups llb,lla Class l, Zone 1, AEx d IIB Class II, Div. 1 & 2, Groups Class III, Div. 1 & 2 Suitable for wet locations Marine Rated (US Only) NEMA 3, 4, 4X Factory Sealed - File E10514 and E91793 Certified - File LR11713 FEATURES-SPECIFICATIONS HOSTILELITE EZ fixtures are now available with Pulse Start Metal Halide ballasts. Pulse Start systems provide higher and better maintained light output with longer life compared standard metal halide systems. Pulse start and standard Metal Halide lamps and ballasts are not interchangeable. Applications HOSTILELITE EZ Series mogul base fixtures are designed for installations where moisture, dirt, dust, corrosion and vibration may be present, or NEMA 3 and 4x areas where wind, water, snow or high ambients can be expected. They can be used in locations made hazardous due to the presence of flammable or explosive gases, vapors and combustible dusts as defined by the NEC. Typical applications include classified areas such as paint manufacturing plants, ammunition facilities, oil and gas producing and refining plants, off-shore and dockside installations, tank farms, pipeline pumping stations and marine loading and fuel transfer terminals. Features Three light sources High Pressure Sodium (50-0W), Metal Halide (70-0W) and Pulse Start Metal Halide (175-0W) HOSTILELITE EZ fixtures are now available with Pulse Start Metal Halide ballasts Mounting choice Pendant, ceiling, 25 stanchion or 90 wall mount, all with wireless design that allows fast, easy fixture installation or removal for maintenance. See pages L for trunnion mounted fixtures Factory sealed No external seal needed. Simply wire mounting cap and thread on fixture to install Corrosion resistant Copper-free aluminum die cast construction. Baked powder epoxy finish, electrostatically applied. Exposed hardware is 316 grade stainless steel Accessories Available with or without guard, standard dome or angle reflector Options EZ Series fixtures can be specified with instant restart for lamps, auxiliary quartz circuit, ballast protector, and fuse kits. (See page L156 for details) Catalog Number Logic EZ (CEN*) Series Constant Lamp Type S High Pressure Sodium H Metal Halide P Pulse Start Metal Halide Lamp Wattage Watt Watt /MH Watt /MH Watt /MHP Watt MH/MHPk Watt /MHP Watt /MH/MHPk Watt MHP Watt MHP 0 Watt /MH/MHPk Voltage V 0 Quadri-Volt, 60 Hz. (120, 208, 2, 277) Volts, 60 Hz. 6 TriTap Canada (120, 277, 347), 60 Hz V, 60Hz 8 220/2 Volt, 50 Hz. *CEN (CENELEC) Approved option available on some models. See page L160 for more information. j Two eyebolts plus 12 of connecting chain included. k 175,250 and 0W MH EXPORT ONLY (EISA LAW). l Not for use with DUAL-ARC-TUBE Lamps. V Consult factory for available lamp and voltage combinations. Compliances UL-844 Electric Lighting Fixtures for use in Hazardous Locations UL Marine Type Electric Lighting Fixtures UL-1598 Standard for HID Lighting Fixtures CSA C22.2 no. 137-M1981 Electric Luminaires for use in Hazardous Locations CSA C22.2 no Special purpose enclosure NEMA 3, 4, 4x, 7CD, 9EFG Options Q Auxiliary Quartz Standbyl R Instant Restrikel(150W Max) BP Ballast Protector PS Paint Spray (50, 70, 100W, 70, 100, MH) EB Eyeboltsj SU103 Assembled w/lamp LS Standard Lamp Supplied LD Dual Arc Tube LampSupplied for 70, 100, 150 only Guard G Omit G if guard is not required Reflector S VM Fiberglass Dome Reflector A VM Fiberglass Angle Reflector D Deep White Reflector Z Deep Alzak Reflector Mounting Type A2 3/4 Pendant A3 1 Pendant X2 3/4 Ceiling X3 1 Ceiling B2 3/4 Bracket B3 1 Bracket D4 1-1/4 /1-1/2 Stanchion L164
2 KILLARK H A Z LO C HIGH PRESSURE SODIUM 50-0W MOGUL BASE HID Class I, Div. 1 & 2 Groups C,D Class l, Zone 1 & 2, Groups llb,lla Class l, Zone 1, AEx d IIB Class II, Div. 1 & 2, Groups Class III, Div. 1 & 2 Suitable for wet locations Marine Rated (US Only) NEMA 3, 4, 4X Factory Sealed FEATURES-SPECIFICATIONS - File E10514 and E91793 (Marine) Certified - File LR11713 Pendant Ceiling Wall Stanchion 50 S S S S- 250 S-50 0 S-51 EZ 50-0 WATT, HIGH PRESSURE SODIUM jm 60HZ PENDANT 3/4 k CEILING 3/4 k WALL 3/4 k STANCHION 1-1/4 l 120, 208, 2, 277 EZS050A2G EZS050X2G EZS050B2G EZS050D4G 120, 277, , 208, 2, 277 EZS070A2G EZS070X2G EZS070B2G EZS070D4G 120, 277, 347 EZS076A2G EZS076X2G EZS076B2G EZS076D4G 480 EZS075A2G EZS075X2G EZS075B2G EZS075D4G 120, 208, 2, 277 EZS100A2G EZS100X2G EZS100B2G EZS100D4G 120, 277, 347 EZS106A2G EZS106X2G EZS106B2G EZS106D4G 480 EZS105A2G EZS105X2G EZS105B2G EZS105D4G 120, 208, 2, 277 EZS150A2G EZS150X2G EZS150B2G EZS150D4G 120, 277, 347 EZS156A2G EZS156X2G EZS156B2G EZS156D4G 480 EZS1A2G EZS1X2G EZS1B2G EZS1D4G 120, 208, 2, 277 EZS250A2G EZS250X2G EZS250B2G EZS250D4G 120, 277, 347 EZS256A2G EZS256X2G EZS256B2G EZS256D4G 480 EZS2A2G EZS2X2G EZS2B2G EZS2D4G 120, 208, 2, 277 EZS0A2G EZS0X2G EZS0B2G EZS0D4G 120, 277, 347 EZS6A2G EZS6X2G EZS6B2G EZS6D4G 480 EZS5A2G EZS5X2G EZS5B2G EZS5D4G j See Hazardous Location Application Data on pages L160 - L161 for specific suitabilities. k For 1 inch pendant, ceiling and wall hubs, substitute 3 for 2 in catalog number; example: EZS070A3G. l Stanchion conduit hub size supplied is 1-1/2 with 1-1/2 to 1-1/4 reducer for 1-1/4 mounting. (Refer to catalog logic). m Luminaire catalog numbers include guards. To order luminaire without guard, omit last letter G from catalog number. TE: Reflectors must be ordered separately (see page L157). All luminaires are designed for mounting with lamp in base up position. SEE SOFTWARE FOR LATEST LED PHOTOMETRY L165
3 KILLARK Z A H LO C METAL HALIDE 70-0W MOGUL BASE HID Class I, Div. 1 & 2 Groups C,D Class l, Zone 1 & 2, Groups llb,lla Class l, Zone 1, AEx d IIB Class II, Div. 1 & 2, Groups Class III, Div. 1 & 2 Suitable for wet locations Marine NEMA 3, 4, 4X Factory Sealed ORDERING INFORMATION - File E10514 and E91793 (Marine) Certified - File LR11713 Pendant Ceiling Wall Stanchion 70 o M o M o M-575 n 250 o M-58 0 o M-59 EZ 70-0 WATT, METAL HALIDE jmo 60HZ PENDANT 3/4 k CEILING 3/4 k WALL 3/4 k STANCHION 1-1/4 l 120, 208, 2, 277 EZH070A2G EZH070X2G EZH070B2G EZH070D4G 120, 277,347 EZH076A2G EZH076X2G EZH076B2G EZH076D4G 480 EZH075A2G EZH075X2G EZH075B2G EZH075D4G 120, 208, 2, 277 EZH100A2G EZH100X2G EZH100B2G EZH100D4G 120, 277,347 EZH106A2G EZH106X2G EZH106B2G EZH106D4G 480 EZH105A2G EZH105X2G EZH105B2G EZH105D4G 120, 208, 2, 277 EZH170A2G EZH170X2G EZH170B2G EZH170D4G 120, 277,347 EZH176A2G EZH176X2G EZH176B2G EZH176D4G 480 EZH175A2G EZH175X2G EZH175B2G EZH175D4G 120, 208, 2, 277 EZH250A2G EZH250X2G EZH250B2G EZH250D4G 120, 277,347 EZH256A2G EZH256X2G EZH256B2G EZH256D4G 480 EZH2A2G EZH2X2G EZH2B2G EZH2D4G 120, 208, 2, 277 EZH0A2G EZH0X2G EZH0B2G EZH0D4G 120, 277,347 EZH6A2G EZH6X2G EZH6B2G EZH6D4G 480 EZH5A2G EZH5X2G EZH5B2G EZH5D4G j See Hazardous Location Application Data on pages L160 - L161 for specific suitabilities. k For 1 inch pendant, ceiling and wall hubs, substitute 3 for 2 in catalog number; example: EZH070A3G. l Stanchion conduit hub size supplied is 1-1/2 with 1-1/2 to 1-1/4 reducer for 1-1/4 mounting. (Refer to catalog logic). m Luminaire catalog numbers include guards. To order luminaire without guard, omit last letter G from catalog number. n Will also operate 150W M107 Metal Halide Lamps. o 175, 250, 0W MH EXPORT ONLY (EISA LAW). TE: Reflectors must be ordered separately (see page L157). All luminaires are designed for mounting with lamp in base up position. L166
4 KILLARK H A Z LO C PULSE START METAL HALIDE 150-0W MOGUL BASE HID Class I, Div. 1 & 2 Groups C,D Class l, Zone 1 & 2, Groups llb,lla Class l, Zone 1, AEx d IIB Class II, Div. 1 & 2, Groups Class III, Div. 1 & 2 Suitable for wet locations Marine NEMA 3, 4, 4X Factory Sealed ORDERING INFORMATION - File E10514 and E91793 (Marine) Certified - File LR11713 Pendant Ceiling Wall Stanchion 150 M-102 M M M M M M-135 EZ WATT, PULSE START METAL HALIDE jmo 60HZ PENDANT 3/4 k CEILING 3/4 k WALL 3/4 k STANCHION 1-1/4 l 120, 208, 2, 277 EZP150A2G EZP150X2G EZP150B2G EZP150D4G 120,277,347 EZP156A2G EZP156X2G EZP156B2G EZP156D4G 480 EZP1A2G EZP1X2G EZP1B2G EZP1D4G 120, 208, 2, 277 EZP170A2G EZP170X2G EZP170B2G EZP170D4G 120,277,347 EZP176A2G EZP176X2G EZP176B2G EZP176D4G 480 EZP175A2G EZP175X2G EZP175B2G EZP175D4G 120, 208, 2, 277 EZP250A2G EZP250X2G EZP250B2G EZP250D4G 120,277,347 EZP256A2G EZP256X2G EZP256B2G EZP256D4G 480 EZP2A2G EZP2X2G EZP2B2G EZP2D4G 120, 208, 2, 277 EZP320A2G EZP320X2G EZP320B2G EZP320D4G 120,277,347 EZP326A2G EZP326X2G EZP326B2G EZP326D4G 480 EZP325A2G EZP325X2G EZP325B2G EZP325D4G 120, 208, 2, 277 EZP350A2G EZP350X2G EZP350B2G EZP350D4G 120,277,347 EZP356A2G EZP356X2G EZP356B2G EZP356D4G 480 EZP3A2G EZP3X2G EZP3B2G EZP3D4G 120, 208, 2, 277 EZP0A2G EZP0X2G EZP0B2G EZP0D4G 120,277,347 EZP6A2G EZP6X2G EZP6B2G EZP6D4G 480 EZP5A2G EZP5X2G EZP5B2G EZP5D4G j See Hazardous Location Application Data on pages L160 - L161 for specific suitabilities. k For 1 inch pendant, ceiling and wall hubs, substitute 3 for 2 in catalog number; example: EZP170A3G. l Stanchion conduit hub size supplied is 1-1/2 with 1-1/2 to 1-1/4 reducer for 1-1/4 mounting. (Refer to catalog logic). m Luminaire catalog numbers include guards. To order luminaire without guard, omit last letter G from catalog number. TE: Reflectors must be ordered separately (see page L157). All luminaires are designed for mounting with lamp in base up position. SEE SOFTWARE FOR LATEST LED PHOTOMETRY L167
5 KILLARK Z A H LO C Mounting Boxes COMPONENT PARTS/ACCESSORIES/OPTIONS HID FIXTURES Pendant Ceiling EACj Replacement Globe & Support Assemblies Wall Bracket HIC-BEIGE replacement wiring plug for EZBx Wall Bracket 25 Stanchion EZCUP Close up plug for EZ mounting boxes. Used for maintenance when fixture is removed for service. REPLACEMENT GLOBE & GLOBE SUPPORT ASSEMBLY SERIES TYPE WATTAGE EZS EZH MH EZP MHP 150, 175, 250 EZS 250, 0 EZH MH 0 EZP MHP EZGS1 EZGS2 HUB SIZE MOUNTING BOXES PENDANT CEILING BRACKET STANCHION 3/4 EZA2 EZX2** EZB2 1 EZA3 EZX3 EZB3 1-1/4 / 1-1/2 EZD4* * Supplied as 1-1/2 NPT with 1-1/2 x 1-1/4 reducer ** 25 cu. in. below EZTB tangs. EZ OPTIONS Instant Restart Option Factory installed special ignitor provides hot lamp instant restart of lamps after power interruption of up to 1 minute. Available for 50, 70, 100 and 150 watt lamps only. Add suffix R to fixture catalog number (50/60 Hz). Quartz Emergency Lamp Factory installed special auxiliary quartz relay and D.C. bayonet base socket installed to accept 100 watt, 120 volt quartz (100Q/ DC) lamps only. Lamps not supplied. Refer to Hazardous Location Application Data chart to verify suitability. Add suffix Q to fixture catalog number. Ballast Protection Cutout Optional factory installed special ballast protector replaces the standard ignitor and applies starting pulse to the lamp for 10 to 15 seconds each time voltage is supplied to the ballast. If the lamp has not ignited by the end of the time period, the starter will cease pulsing. Used to eliminate the continuous high voltage pulsing of the ignitor when end of life, lamp cycling, or missing lamp conditions exist. Available for 70, 100, 150, 250 and 0 watt fixtures. Add suffix BP to fixture catalog number. Notes: BP & R cannot be used together. Q & R cannot be used together. FACTORY SEALED Class I, DIV. 1 BCD Class II, DIV. 1&2 EFG CLASS III NEMA 3, 4X IP66 * C ambient T3 Rated PHOTO CELL FIELD KITS WITH HKB - GL BOX AND COVER VMHKPC1 VMHKPC2 VMHKPC3 120VAC VAC 347VAC L168
6 KILLARK H A Z LO C COMPONENT PARTS/ACCESSORIES EZG1 VMAGS GUARDS SERIES TYPE WATTAGE DESCRIPTION EZG1 VMAGS EZS EZH MH EZP MHP 150, 175, 250 EZH MH 0 EZP MHP Painted cast aluminum Cadmium plated steel VMAGBC Bottom Closure for VMAG25S or VMAGSj j For VMAGS with bottom closure order part number VMAGSBC. VMPSD EZTB VMPA HRD0 HRD0ALZ (pictured) EZCB EZMO VMPSD VMPA HRD0 HRD0ALZ REFLECTORS DESCRIPTION Standard dome. fiberglass reinforced polyester 30 Angle fiberglass reinforced polyester Deep dome. Aluminum with white finish k Deep dome with specular anaodized finish k REPLACEMENT CONNECTION BLOCKS AND SOCKET DESCRIPTION EZTB EZCB EZMO Female (goes in splice box) Male (goes in top of fixture body) Replacement lamp socket with gasket k For clearance, wall mount models require standoff of 1/2 if not bottom feed; 1-1/2 if bottom feed. SEE SOFTWARE FOR LATEST LED PHOTOMETRY L169
7 KILLARK Z A H LO C BALLAST HOUSING WITH GLOBE SUPPORT ASSEMBLY Housing Globe & Globe Support Assemblies FEATURES-SPECIFICATIONS HOUSING GLOBE & GLOBE SUPPORT ASSEMBLIESj TYPE S-68/ S-62/ S-54/ S-/ S-50/ S-51/ VOLTAGE 120, 208, 2, 277/60Hz EZS , 2V/50Hz EZS , 208, 2, 277/60Hz EZS Hz EZS , 277, 347/60Hz EZS , 2V/50Hz EZS , 208, 2, 277/60Hz EZS Hz EZS , 277, 347/60Hz EZS , 2V/50Hz EZS , 208, 2, 277/60Hz EZS Hz EZS1 120, 277, 347/60Hz EZS , 2V/50Hz EZS , 208, 2, 277/60Hz EZS Hz EZS2 120, 277, 347/60Hz EZS , 2V/50Hz EZS , 208, 2, 277/60Hz EZS Hz EZS5 120, 277, 347/60Hz EZS6 220, 2V/50Hz EZS8 j and MH assemblies may be ordered with the CEN (CENELEC) suffix; see page L160 for more information. METAL HALIDE HOUSING GLOBE & GLOBE SUPPORT ASSEMBLIESj TYPE 70 M-98/MH 100 M-90/MH 175 M-57/MH 250 M-58/MH 0 M-59/MH VOLTAGE 120, 208, 2, 277/60Hz EZH , 277, 347V/60Hz EZH Hz EZH /2V/50Hz EZH , 208, 2, 277/60Hz EZH , 347V/60Hz EZH , 220, 2V/50Hz EZH Hz EZH , 208, 2, 277/60Hz EZH Hz EZH , 277, 347V/60Hz EZH , 2V/50Hz EZH , 208, 2, 277/60Hz EZH Hz EZH2 120, 277, 347V/60Hz EZH , 2V/50Hz EZH , 208, 2, 277/60Hz EZH Hz EZH5 120, 277, 347V/60Hz EZH6 220, 2V/50Hz EZH8 PULSE START HOUSING GLOBE & GLOBE SUPPORT ASSEMBLIES TYPE 175 k M137/MHP 250 M138/MHP 320 M132/ MHP 350 M131/MHP 0 M135/MHP VOLTAGE 120, 208, 2, 277/60Hz EZP EZP , 277, 347V/60Hz EZP , 208, 2, 277/60Hz EZP EZP2 120, 277, 347V/60Hz EZP , 2V/50Hz EZP , 208, 2, 277/60Hz EZP EZP , 277, 347V/60Hz EZP , 2V/50Hz EZP , 208, 2, 277/60Hz EZP EZP3 120, 277, 347V/60Hz EZP , 2V/50Hz EZP , 208, 2, 277/60Hz EZP0 480 EZP5 120, 277, 347V/60Hz EZP6 220, 2V/50Hz EZP8 k For 150 Watt, change 7 to 5 in catalog number. Example EZP150. TE: See pages L141 - L142 for ballast data & fuse kit information. L170
8 KILLARK H A Z LO C DIMENSIONS Pendant Ceiling Wall Bracket 25 Stanchion.31 (8) 5.25 (133) W* EZL LED 250-0W** MOUNTING DIMENSIONS PENDANT CEILING BRACKET STANCHION A B C D A B C D A B C D A B C 22 (8) 26-1/4 (666) 21-1/4 (539) 24-1/4 (615) 11-1/4 (2) 11-1/4 (2) 18 (457) 22-1/4 (565) 22 (8) 26-1/4 (666) 21-1/4 (539) 24-1/4 (615) 11-1/4 (2) 11-1/4 (2) 18 (457) 22-1/4 (565) 22-7/8 (580) 26-7/8 (682) 22-1/8 (561) 24-7/8 (631) 16-3/4 (425) 16-3/4 (425) 18 (457) 22-1/4 (565) 24-7/8 (631) 28-1/2 (724) 24 (609) 26-11/16 (678) 19-13/16 (503) 21-1/2 (546) * 50, 70, 100, and 150W ; 70, 100, 175 and 250W MH; 150, 175, 250W MHP. ** 250 and 0W, 0W MH; 320, 350, 0W MHP. Reflector Dimensions Standard Dome Angle Deep Dome SEE SOFTWARE FOR LATEST LED PHOTOMETRY L171
9 KILLARK Z A H LO C CLASS I APPLICATION DATA FOR HAZARDOUS LOCATIONS EZ HAZARDOUS LOCATION DATA CLASS I, DIVISIONS 1 & 2 jkm SERIES TYPE EZS EZH EZP MH MHP RATED AMBIENT C SUPPLY WIRE SUITABLE FOR C MIN. CLASS I, DIVISIONS 1 & 2 MAXIMUM SURFACE TEMPERATURE UL/CSA TEMP. I.D. TEMP. I.D. UL/CSA W/O QTZ. W/QTZ. L GROUPS T5 T4 C,D 50 T5 C,D 65 T4A C,D T5 T4 C,D 70 T5 C,D 65 T4A C,D T5 T4 C,D 100 T5 C,D 65 T4A C,D T4A T4 C,D 150 T4A C,D 65 T4 C,D 250 T3C T3C C,D T3C C,D 0 T3C T3C C,D T4A C,D 70 T4A C,D 65 T4A C,D T4A C,D 100 T4A C,D 65 T4A C,D 175 T4 T3C C,D T4 C,D 250 T3C T3C C,D T3C C,D 0 T3A T3A C,D 150 or 175 T4 T3C C,D T4 C,D 250 T3C T3C C,D 25 T3C C,D 320 T3A T3A C,D 350 T3A T3A C,D 0 T3A T3A C,D Notes for Class I, II, III Application Data Tables. j Instant restrike limited to C ambient maximum. * k Temperature code ID marked with an asterisk on Class ll table are listed for simultaneous use in Class I, Groups C, D, and Class II, Groups E, F, G or Groups E, F. l Fixtures marked not suitable for Class ll applications when supplied with auxiliary quartz. m See Class II table for fixtures suitable for locations having deposits of readily combustible paint residue (paint spray booths). Do not install where marked operating temperature exceeds ignition temperature of hazardous atmosphere. CEN Options Applications Killark EZ series fixtures are available with a European Certificate of Conformity from PTB (Physikalisch-Technische Bundesanstalt), the approval agency based in Germany. Fixtures with this rating will be useful for Original Equipment Manufacturers and others who build and ship apparatus into European markets. This approval is granted by PTB with the use of a special ground lug and label. Fixtures carrying an EEx d llb approval are automatically granted an IP54 (ingress protection) rating. See Temperature Code chart below for PTB certified ratings. Killark EZ fixtures with the PTB rating and labels still carry all UL & CSA ratings. Fixture housing/globe/globe support assemblies (e.g. EMS050 CEN) may be ordered with the CEN suffix. Complete fixture numbers, with the CEN suffix, will be shipped with the mounting boxes, guards and accessories as component parts. Reflectors and other accessory parts, as listed on page L157, may be used. Killark fixtures are NPT tapped and plugged with at least one conduit hole open. Compliances EN 50014:1992 EN 50018:1994 EEx d IIB T6 (or T5-T2) PTB No. Ex-98.E.1076 MAXIMUM AMBIENT TEMPERATURE RANGE - 20 C TO C TYPE OF LUMINAIRE TYPE OF ENCLOSURE FORM OF THE MAXIMUM WATTAGE TEMPERATURE CLASS EZH50 EZx25 ED28/M W T4 EZH70 EZx25 ED28/M-98 70W T4 EZH10 EZx25 ED28/M W T4 EZH15 EZx25 ED28/M W T4 EZH17 EZx25 ED28/M W T4 EZH25 EZx25 ED28/M W T3 EZH EZx ED37/M-59 0W T3 EZS50 EZx25 ED23-1/2/S-68 50W T4 EZS70 EZx25 ED23-1/2/S-62 70W T4 EZS10 EZx25 ED23-1/2/S W T4 EZS15 EZx25 ED23-1/2/S- 150W T4 EZS25 EZx ED18/S W T3 EZS EZx ED18/S-51 0W T3 L172
10 KILLARK H A Z LO C EZS 50 EZS 70 EZS 100 EZS 150 CLASS II/III APPLICATION DATA FOR HAZARDOUS LOCATIONS RATED AMBIENT C SUPPLY WIRE SUITABLE FOR C EZ HAZARDOUS LOCATION DATAJ CLASS II & III, DIVISIONS 1 & 2jk TEMP. I.D. W/O QTZ. T3B CLASS II, DIV. 1 & 2, MAX. SURFACE TEMP. UL/CSA SUITABILITY TEMP. I.D. WITH QTZl CLASS III, DIV. 1 & 2 UL/CSA SUITABILITY UL-595 MARINE U.L. PAINT SPRAY SUITABILITYm UL/CSA TYPE 3 (RAINTIGHT) Notes for Class I, II, III Application Data Tables. j Instant restrike limited to C ambient maximum. * k Temperature code ID marked with an asterisk on Class ll table are listed for simultaneous use in Class I, Groups C, D, and Class II, Groups E, F, G or Groups E, F. l Fixtures marked or are not suitable for Class ll or II applications when supplied with auxiliary quartz. m Suitability for locations having deposits of readily combustible paint residue (paint spray booths). Do not install where marked operating temperature exceeds ignition temperature of hazardous atmosphere. GROUPS W/O QTZ. WITH QTZL W/O QTZ.WITH QTZ. l E,F E,F, UL/CSA TYPE 4 (HOSEDOWN) EZS 250 T3 T3 E,F E,F EZS 0 EZH MH 70 EZH MH 100 EZH MH T4A T4 T3C T4A T4 T3C T3A* E,F, E,F, EZH MH 250 EZH MH 0 EZP MHP 150 or 175 T3A* EF EZP MHP 250 EZP MHP 320,350 EZP MHP 0 TABLE N.E.C ( D ) I.D. DEGREES C DEGREES F T T T2A T2B T2C T2D T T3A T3B T3C T T4A T T6 1 SEE SOFTWARE FOR LATEST LED PHOTOMETRY L173
INCANDESCENT/COMPACT FLUORESCENT/MEDIUM BASE HID
KILLARK INCANDESCENT/COMPACT FLUORESCENT/MEDIUM BASE HID Class I, Div. 1 & 2, Groups C,D Class I, Zones 1 & 2, Groups llb, lla Class II, Div. 1 & 2, Groups E,F,G Class III, Div. 1 & 2 Suitable for wet
4L EVM Hazard Gard H.I.D. Luminaires Mogul Base Factory Sealed (Groups C.D)
4L EVM Hazard Gard H.I.D. Luminaires Mogul Base Factory Sealed (Groups C.D) Cl. I, Div. 1 Groups B (GB suffix),c,d (with suffix GB), IIB IIA Paint Spray (100W max) Application: Hazard Gard luminaires are
COMPACT FLUORESCENT EMERGENCY FIXTURES
KILLARK H A Z LO C COMPACT FLUORESCENT EMERGENCY FIXTURES VE3Q/VE4Q Class I, Div. 2, Groups A,B,C,D Class l, Zone 2, Groups IIC, llb, lla Class II, Div. 1 & 2, Groups E,F,G Class III NEMA 3, 4, 4X IP66
SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent
SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent S A F Class I, Division 2, Groups A, B, C & D Class II, Division 1 & 2, Groups E, F & G Class III Zone 2, Groups IIA, IIB & IIC UL 844
SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent
SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent S A F Class I, Division 2, Groups A, B, C & D Class II, Division 1 & 2, Groups E, F & G Class III Zone 2, Groups IIA, IIB & IIC UL 844
Applications. Standard Materials. Certifications and Compliances
Code Master 2 HID Factory Sealed Luminaires Class I, Division 1 and 2, Groups C, D Class I, Division 1 and 2, Groups B, C, D Applications Ideal for use in chemical and petrochemical plants, such as manufacturers
SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent
SAF SERIES Hazardous Location Mogul Base HID and Compact Flourescent S A F Class I, Division 2, Groups A, B, C & D Class II, Division 1 & 2, Groups E, F & G Class III Zone 2, Groups IIA, IIB & IIC UL 844
Applications. Standard Materials. Certifications and Compliances
Code Master 2 HID Factory Sealed Luminaires NEC: Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Marine Type Electric Fixtures Outside Type (Salt Water) Class I, Division
HID/AREA: NEC/CEC EXPLOSIONPROOF. Applications. NEC/CEC Certifications and Compliances
Integrally Ballasted. 50 W, 70 W, 100 W, 150 W, 250 W, 400 W HPS; 175 W, 250 W, 320 W, 350 W, 400 W PSMH; 175 W, 250 W, 400 W MH. Applications Ideal for use in chemical and petrochemical plants, such as
SXPJ SERIES S X. HID & Compact Fluorescent Lighting for Hazardous and Hostile Locations
SXPJ SERIES HID & Compact Fluorescent Lighting for Hazardous and Hostile Locations S X PJ Class I, Division 1, Group C & D Class II, Division 1, Groups E, F & G Class III Zone 1, Groups IIA & IIB Factory
Applications. Standard Materials
Code Master Jr. HID Factory Sealed Luminaires Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 50 W, 70 W, 00 W, 75 W PSMH. 75 W MH V. Medium Base. For Use with Threaded Metal Conduit. Class I, Division
Applications. Straight Stanchion-Mount Fixture with Prismatic Glass Refractor and Guard. Pendant Mount Fixture with Prismatic Glass Refractor
Mercmaster III HID 50-250 Watt Luminaires Applications Enclosed and gasketed fixtures suitable for use in: Marine and wet locations A wide range of industrial, chemical processing and other areas where
N2MV Series W Non-metallic
N2MV Series 50-175W Non-metallic Cl. I, Div. 2, Groups A, B, C, D Cl. II, Groups F, G Cl. III & Simultaneous Presence (100W max) Marine & Wet Locations, R, 4, 4X; IP56 L Applications: N2MV series Champ
SXPJ SERIES S X azz.com/rigalite
SXPJ SERIES HID Lighting & Compact for Explosion Fluorescent Proof, Lighting Hazardous for and Hazardous Hostile Locations and Hostile Locations S X PJ Class I, Division 1, Group C & D Class II, Division
AFL FLOODLIGHT SERIES
AFL FLOODLIGHT SERIES A FL Flood Lighting for Hazardous Locations Class I, Division 2, Groups A, B, C & D UL 844 Hazardous Locations UL 598A Marine Outside Type Zone 2, Groups IIA, IIB & IIC CUL Cast Aluminum
Mercmaster LED Series Luminaires Enclosed and Gasketed Fixtures
Mercmaster Series Luminaires LIGHTING: ENCLOSED AND GASKETED AREA /INDUCTION Applications Enclosed and gasketed fixtures suitable for use in: Marine and wet locations A wide range of industrial, chemical
Code Master Incandescent Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof For use with threaded metal conduit.
Applications For use in hazardous locations such as plants where plastics, paints, thinners and petrochemicals are manufactured. For use in chemical and petrochemical plants, such as manufacturers of plastics,
HID/FLOODLIGHT: NEC/CEC EXPLOSIONPROOF. Applications. Options
Applications UL Listed for Outside Type (Salt Water). Ideal in Class I, Division 1 and 2 installations in refineries, in pipeline transportation facilities, at drilling rigs and in production facilities
LIGHTING: EXPLOSIONPROOF FLOODLIGHT. Applications. Options
Code Master 2 HID Factory Sealed Floodlights NEC: Class 1, Division 1 and 2, Groups C, D Marine Type Electric Fixtures Outside Type (Salt Water) CEC: V Class I, Division 1 and 2, Groups B, C, D Class II,
CEC: Class I, Division 1 and 2, Groups B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Type 4X Exd IIB + H 2
Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 75 W PSMH. 75 W MH. Medium Base. For Use with Threaded Metal Conduit. Applications For use in chemical and petrochemical plants, such as manufacturers
Lighting: Explosionproof Area HID. Applications. Standard Materials
Code Master Jr. HID Factory Sealed Luminaires Integrally Ballasted. 50 W, 70 W, 00 W, 50 W HPS; 50 W, 70 W, 00 W, 75 W PSMH. 75 W MH V. Medium Base. For Use with Threaded Metal Conduit. Class I, Division
KH Series Kemlux III Enclosed/Gasketed
For use in corrosive, harsh, hazardous applications such as chemical, petrochem, marine, power generation, pharmaceutical, or food processing plants Mogul base socket on tanks C, D & E Medium base socket
FLUORESCENT BI-PIN/MEDIUM BASE HID
KILLARK Z A H LO C FLUORESCENT BI-PIN/MEDIUM BASE HID Cass I, Div. 2, Groups A,B,C,D* Cass, Zone 2, Groups C,B,A Cass II, Div. 1 & 2, Groups E,F,G* Cass III Suitabe for wet ocations Marine Rated (US Ony)
DMV Series W For Combustible Dusts
L DMV Series 50-250W For Combustible Dusts Champ H.I.D. Luminaires Cl. I, Div. 2, Groups A, B, C, D Restricted Breathing Cl. I, Div. 2 & Zone 2 (Suffix S826) Certified for IEC Zone 2 (Suffix S826TB) Cl.
LOW PROFILE LINEAR ALUMINUM LED EXCLUSIVE DESIGN FEATURES
L KILLARK TI IGH NG HA Z LO C LOW PROFILE LINEAR ALUMINUM LED EXCLUSIVE DESIGN FEATURES High temperature rated silicone gasketing provides Type 4X & IP66 sealing. Diffused Clear 2 Lens Choices: Clear for
Code Master 2 Factory Sealed Induction Lighting System Explosionproof
Lighting Induction Code Master 2 Factory Sealed Induction Lighting System NEC/CEC: Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Marine Type Electric Fixtures Outside
Code Master 2 Factory Sealed Induction Lighting System Explosionproof
Code Master 2 Factory Sealed Induction Lighting System Class I, Division 1 and 2, Groups C, D Class II, Division 1 and 2, Groups E, F, G Marine Type Electric Fixtures Outside Type (Salt Water) NEMA 4X
SAFR LED SERIES S A F R L E D. Hazardous Location LED Luminaire
SAFR LED SERIES Hazardous Location LED Luminaire Class I, Division 2, Groups A, B, C & D Class II, Division & 2, Groups E, F & G Class III Class I, Zone 2, Groups IIA, IIB & IIC UL 8750 LED Safety UL 844
LOW PROFILE LINEAR ALUMINUM LED EXCLUSIVE DESIGN FEATURES
KILLARK Z A H LO C LOW PROFILE LINEAR ALUMINUM LED EXCLUSIVE DESIGN FEATURES High temperature rated silicone gasketing provides NEMA 4X & IP66 sealing. Diffused 2 Lens Choices: Clear for maximum lumens
G1-1. HID Lighting Fixtures: Explosionproof, Dust-Ignitionproof. Page Description
HID Lighting Fixtures: Explosionproof, Dust-Ignitionproof 1-1 Code Master 2 with Polyester Reflector Code Master Jr. without Reflector Code Master 2 Floodlight A-51 roup A & B with Porcelain Reflector
SAFJ LED SERIES S A L E D. Hazardous Location Compact LED
SAFJ LED SERIES Hazardous Location Compact LED Class I, Division 2, Groups A, B, C, & D Class II, Division 1 & 2, Groups E & F Class III Simultaneous Presence Enclosed & Gasketed Wet Locations NEMA 3R,
MHD2/MHDO SERIES MHD2. Marine Heavy Duty Outdoor Non-Metallic Fluorescent CLASS 1 DIVISION 2 FLUORESCENT LIGHT
MHD2/MHDO SERIES Marine Heavy Duty Outdoor Non-Metallic Fluorescent Non-metallic, glass reinforced polyester housing. 3/4 in. NPT aluminum hub. Captive stainless steel latches. Stainless steel mounting
MHDS SERIES M H D S. Stainless Steel Marine Heavy Duty Luminaire for Hazardous Locations
MHDS SERIES Stainless Steel Marine Heavy Duty Luminaire for Hazardous Locations Class I, Division 2, Groups A, B, C & D Class II, Division 2, Groups F & G Class III UL 844 Hazardous Locations UL 198A Marine
MHD2/MHDO SERIES M H D 2. Marine Heavy Duty Non-Metallic Fluorescent
MHD2/MHDO SERIES Marine Heavy Duty Non-Metallic Fluorescent Class I, Division 2, Groups A, B, C & D Class II, Division 2, Groups F & G Class III Zone 2, Groups IIA, IIB & IIC UL 844 Hazardous Locations
SAFR LED S A F R L E D. LED Area Lighting for Hazardous Locations
LED Class I, Division 2, Groups A, B, C & D Class II, Division & 2, Groups E, F & G Class III Class I, Zone 2, Groups IIA, IIB & IIC UL 8750 LED Safety UL 844 Hazardous Locations UL 598 Wet Locations UL
G1-24. Applications UL listed for marine type electric fixtures--outside. Ideal in Class I, Div. 1 and 2 installations
1-24 Applications UL listed for marine type electric fixtures--outside type (salt water). Ideal in Class I, Div. 1 and 2 installations in refineries, pipeline transportation facilities; at drilling rigs
Rig-A-Lite LED Luminaire Guide. Superior LED Technology for Hazardous and Severe Environments. Five-Year Warranty
Rig-A-Lite LED Luminaire Guide Superior LED Technology for Hazardous and Severe Environments Five-Year Warranty Rig-A-Lite LED Luminaires The Rig-A-Lite LED luminaires are the perfect combination of dependability,
Areamaster 1000 Floodlights Integrally Ballasted W HID For hazardous locations.
A, IIB, IIC Applications Powerful, efficient weatherproof lighting for large areas such as: Pulp and paper mills Processing plants Chemical plants Oil refineries Foundries Storage areas Waste and sewage
N2LED Series Emergency Luminaires Non-Metallic Emergency Egress Lighting Systems with Remote or Direct Mounted Lamps.
Applications Enclosed and gasketed, non-metallic emergency lighting system suitable for use in areas where flammable gases or vapors may become present due to abnormal, unusual or accidental conditions
Mercmaster LED Series Luminaires Enclosed and Gasketed Fixtures
ATEX/IECEx: Zone 2 and 22 II 2 GD Lighting LIGHTING: ENCLOSED AND GASKETED AREA LED/INDUCTION Applications Enclosed and gasketed fixtures suitable for use in: Marine and wet locations A wide range of industrial,
EXBLI & EXBSPI Series. Circuit Breaker Panelboards for Harsh and Hazardous Environments
EXBLI & EXBSPI Series Circuit Breaker Panelboards for Harsh and Hazardous Environments KILLARK Z A H LO C NEMA 4X O Ring Gasket Stainless Steel Tri-Lead Cover New Slide MCB Assembly Handles Padlockable
KEMLUXIII KH SERIES HAZARDOUS LOCATION
KEMLUXIII SERIES HAZARDOUS LOATION AT.# APPROVALS JOB TYPE SPEIFIATIONS Applications - Designed to efficiently light corrosive and harsh applications such as chemical, petrochemical, marine, power generation,
INCANDESCENT COPPER-FREE ALUMINUM FIXTURES
KILLARK Z A H LO C WEATHERPROOF INCANDESCENT COPPER-FREE ALUMINUM S Enclosed & Gasketed - File E27731 Certified - File LR11851 INTRODUCTION AND ORDERING INFORMATION V Series Enclosed & Gasketed Applications
Mercmaster II HID Luminaires High Pressure Sodium and Pulse Start Metal Halide. Mogul Base UNILETS for Use with Threaded Metal Conduit.
UNILETS for Use with Threaded Metal Conduit. Applications Enclosed and gasketed HID lighting fixtures for use in tunnels, walkways, bridges, storage facilities, processing plants, parking lots, foundries,
ExceLine 1611 Clovis R. Barker Road San Marcos, TX Fax: PT#: EXSP038A0712
Type No. Catalog No. Job. Name ILXGHB MasterColor Elite Series APPLICATIONS Applications include industrial facilities, manufacturing plants, retail applications, and gymnasiums. CONSTRUCTION The ILX MasterColor
F1-1. HID Lighting: Enclosed and Gasketed. Description. 2, 3 Mercmaster III Family Tree Mercmaster III HID Low Profile Lighting Fixtures
HID Lighting: Enclosed and Gasketed 1-1 Page Description 2, 3 Mercmaster III amily Tree 2-22 Mercmaster III HID Low Profile Lighting ixtures 23-54 Mercmaster III HID 50-250W Lighting ixtures Mercmaster
XPF. XPFMax Performer/al FEATURES TECHNICAL SPECIFICATIONS
XPF XPFMax Performer/al APPLICATIONS, II & III Division 1 explosive atmospheres High, mid & low bay Fuel dispensing facilities Paint booths Marine and watertight requirements Paint & formulation facilities
LED FLOOD LIGHT SOLUTIONS Harsh and Hazardous Products
LED FLOOD LIGHT SOLUTIONS Harsh and Hazardous Products www.hubbell-killark.com Ex- LED Lighting and Control Switches KILLARK LED FLOOD LIGHTS H A Z LO C INDEX PRODUCT PAGE NO. NEMA 4 (or 4X or IP66) Class
FV Series Nonmetallic Fluorescent Luminaires For Hazardous and Adverse Locations
Applications For use in hazardous locations defined by the NEC and CEC as Class I, Division 2, Groups A, B, C and D; Class II, Division 2, Groups F and G; Marine Outdoor Salt Water; UL1598A and. As well
Champ Fixtures. Class I, Division 2 Class I, Zone 2. Floodlight
Champ Fixtures Class I, Division Class I, Zone Floodlight Champ Floodlight Fixtures Whenever Cooper Crouse-Hinds develops a new product, system, or procedure, we focus on one overriding question: Will
Standard Grade 14 Inch Reflector. Ordering Information
Job Type Dimensions Specifications B A NRTL/C C Damp Location D E Slick- On Quick- On F A B C D E F 9-1/2" 2" 9-1/2" 20-22/32 24-27/32" 9-7/16" 14-1/4" 241 mm 51 mm 241 mm 536-631 mm 240 mm 362 mm 9-1/2"
220/230/240V Watt High Pressure Sodium - Hazardous Location Lighting - C1D2 - Pole Mount
220/230/240V Watt High Pressure Sodium - Hazardous Location Lighting - C1D2 - Pole Mount Part #: HAL-PRM-250W-HPS-220V-PT Page: 1 Made in the USA The efficient HAL-PRM-250W-HPS-220V-PT high pressure sodium
MAR SERIES Fluorescent Lighting for Hazardous Locations
MAR SERIES M AR Fluorescent Lighting for Hazardous Locations Class I, Division 2, Groups A, B, C, & D Seismic Tested UL 844 Hazardous Locations UL 924 Emergency Lighting UL 1598A Marine Outside Type CSA
1000 Watt Metal Halide Light - Class 1 Division 2 Groups A-D - T3b Temperature - 110,000 lumens
1000 Watt Metal Halide Light - Class 1 Division 2 Groups A-D - T3b Temperature - 110,000 lumens Part #: HALPRM-1000WMH Made in the USA The extremely durable Larson Electronics HALPRM-1000WMH metal halide
DuraPro Hazardous Area Fluorescent
CSA - Class I Div. 2 - Groups A, B, C, & D CSA - Class I Zone 2 - Groups IIA, IIB & IIC CSA - Class II Div. 2 - Groups F & G CSA - Type 3 UL 844 - Class I Div. 2 - Groups A, B, C, & D UL - Outdoor Marine
Applications. Illustrated Features
Applications For use in locations where a high degree of corrosion resistance is required. FR Series: For use in areas where high humidity or water vapor are present Typical uses include meat- or food-processing
WPP25 250W MP Wal-Pak Borosilicate Glass Hinged/Removabl
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 WPP25 250W MP Wal-Pak Borosilicate Glass Hinged/Removabl Catalog Number Manufacturer Description Weight per unit Product
Plugs and Receptacles: Hazardous Location
U-Line Factory Sealed 15 and 20 Amp Plugs and Receptacles V Plugs and Receptacles Plugs and Receptacles: Hazardous Location Applications Locations where receptacles are used with stationary or portable
U-Line Contender Factory Sealed 20 Amp Plugs and Receptacles Explosionproof, Dust-Ignitionproof
U-Line Contender Factory Sealed 20 Amp Plugs and Receptacles Explosionproof, Dust-Ignitionproof Class I, Groups C, D Class I, Division 2, Group B Class I, Zone 1, Group IIB Class I, Zone 2, Group IIB +
EDS / EFS Series Control Stations
EDS / EFS Series Fully Assembled EFS and EDS Factory Sealed Devices Cl. I, Div. & 2, Groups B*, C, D Cl. II, Div., Groups E, F, G NEMA, 7B*CD, 9EFG Applications: Factory sealed enclosures are installed
D2LC Series. Circuit Breaker Panelboards for Harsh and Hazardous Environments
D2LC Series Circuit Breaker Panelboards for Harsh and Hazardous Environments IBUTI TR HA ON DIS KILLARK Z LO C Type 4X Gasket Stainless Steel Tri-Lead Cover Bolts Spare Sealed Wires Termination at Terminal
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE IMPORTANT SAFEGUARDS READ AND FOLLOW ALL SAFETY INSTRUCTIONS
Champ Fluorescent Luminaires DMVFB Auxiliary Series - 52, 64, & 84 Watt Installation & Maintenance Information SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE IF 1713 IMPORTANT SAFEGUARDS READ AND FOLLOW
Standard Finishes Receptacles: epoxy powder coat Cord connector housings and caps: epoxy powder coat
U-Line Factory Sealed 15 and 20 Amp Plugs and Receptacles V Applications Locations where receptacles are used with stationary or portable electrically operated devices such as: Lighting systems Conveyors
Haz. HazMax Summit/ss TECHNICAL SPECIFICATIONS
Haz HazMax Summit/ss APPLICATIONS High, mid & low bay Petrochemical facilities Hazardous locations Munitions manufacturing and storage Watertight requirements Waste water treatment plants Dusttight requirements
HKH Series. HAZCON Controls for Harsh and Hazardous Environments
HKH Series HAZCON Controls for Harsh and Hazardous Environments Z A H LO C NON-METALLIC DIN RAIL MOUNT Component Mounting Rail Optional Customer I.D. Nameplate Optional Legend Plate Explosion Protective
Spec 5 Conduit Bodies, Covers and Gaskets For Rigid Conduit and IMC
NEC/CEC Suitable for use in the following Applications To provide access to conductors for pulling, splicing, maintenance and future changes/ upgrades. Allows connection of straight conduit runs, branch
PLUGS & RECEPTACLES. INNOVATIVE EXPLOSION PROTECTION by R. STAHL
Series Features: Color coding and pin configuration makes it physically impossible to mate plugs and receptacles of different voltages and current ratings (per IEC 60 309-2). Interlocked switch mechanism
APPLICATIONS APPROVALS. GASKET One piece neoprene. LATCHES Plated steel twist draw. ENTRIES 1 2 NPT feed-through outlets, 3 4 NPT outlets optional.
Haz HazMax Pinnacle/al APPLICATIONS Hazardous locations Watertight requirements Dusttight requirements Oil and gas exploration and production Waste water treatment plants Pipeline compressor / pumping
Prismpack. V Enclosed HOLOPHANE
HOLOPHANE Prismpack V Enclosed PRISMPACK ENCLOSED LUMINAIRES ARE DESIGNED FOR THE MOST STRINGENT OF HIGH BAY APPLICATIONS. THE ALUMINUM COVERED GLASS WITH THE GASKETED GLASS BOTTOM IS ESPECIALLY DESIRABLE
Areamaster LED Flood/High Bay Luminaires
Applications Typical applications include: Pulp and paper mills Processing plants Chemical plants Oil refineries Foundries Storage areas Waste and sewage treatment Parking garages Other areas where dust,
PGL350P W PS Wallpack
3804 South Street 75964-7263, TX Nacogdoches Phone: 936-569-7941 Fax: 936-560-4685 PGL350P1281 350W PS Wallpack Hubbell Lighting, Inc. Catalog Number Manufacturer Description Weight per unit Product Category
Pauluhn ZPL explosionproof LED luminaires For drilling and marine applications
Pauluhn ZPL explosionproof linear LEDs are designed to replace fluorescent T12, T8 and T5HO lighting on marine vessels and land-based and offshore drilling platforms. The rugged and durable design features
P-2 D2P and EWP Factory Sealed Circuit Breaker Panelboards: Explosionproof, Dust-Ignitionproof, Watertight, Corrosion-Resistant
P-2 D2P and EWP Factory Sealed Circuit Breaker Panelboards: Explosionproof, Dust-Ignitionproof, Watertight, Corrosion-Resistant Applications Protection and control of electrical equipment and circuits
ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY
EDS2274 Pos D.E. Selector Switch Cooper Crouse-Hinds Catalog Number Manufacturer Description Weight per unit Product Category Features Box Type SINGLE GANG Contact Configuration 4NO-4NC Number of Circuits
CEC: Class I, Division 1 and 2, Groups B, C, D Class II, Division 1 and 2, Groups E, F, G Class III Type 4X Exd IIB + H 2 3/4 CAP-75 1 CAP-100
Code Master Jr. HID Factory Sealed Luminaires Explosionproof, Dust-Ignitionproof Integrally Ballasted. 50 W, 70 W, 100 W, 150 W HPS; 50 W, 70 W, 100 W, 175 W PSMH. 175 W MH. Medium Base. For Use with Threaded
MagnaPro Hazardous Area Drop Lens Fluorescent
CSA - Class I Div. 2 - Groups A, B, C, & D CSA - Class I Zone 2 - Groups IIA, IIB & IIC CSA - Class II Div. 2 - Groups F & G CSA - Type 3 UL 844 - Class I Div. 2 - Groups A, B, C, & D UL - Outdoor Marine
Surface Mount Explosion Proof, Waterproof Fluorescent Lights - T12 Very High Output - Oil Rigs - 2 L
Surface Mount Explosion Proof, Waterproof Fluorescent Lights - T12 Very High Output - Oil Rigs - 2 L Part #: EPL-48-2L-T12VHO Made in the USA The Larson Electronics EPL-48-2L-T12VHO Explosion Proof Fluorescent
Champ MLL LED luminaires
The Champ MLL linear LED is specifically designed to replace fluorescent T12, T8 and T5HO lighting in harsh and hazardous applications. The rugged and durable design features the industry s most versatile
1E EJB Junction Boxes Cl. I, Div. 1 and 2, Groups B, C, D
Cl. I, Div. and 2, Groups B, C, D Cl. II, Div., Groups E, F, G Cl. II, Div. 2, Groups F, G Cl. III NEMA 3, 4, 4*,, Ex d IIB + H2 T, IP Explosionproof Dust-Ignitionproof Raintight Wet Locations Applications:
NMF 2 SERIES Non-Metallic Enclosed and Gasketed Fluorescent Lighting for Wet and Damp Locations
NMF 2 SERIES Non-Metallic Enclosed and Gasketed Fluorescent Lighting for Wet and s NEMA 4X UL 1598 Wet & s CUL IP65 NSF Enclosure N M F 2 339 NMF2 SERIES Non-Metallic Enclosed and Gasketed Fluorescent
1E EJB Junction Boxes Cl. I, Div. 1 and 2, Groups B, C, D
EJB Junction Boxes Cl. I, Div. and 2, Groups B, C, D Cl. II, Div., Groups E, F, G Cl. II, Div. 2, Groups F, G Cl. III NEMA 3, 4, 4X*,, Ex d IIB + H2 T6, IP66 Explosionproof Dust-Ignitionproof Raintight
Receptacle housing and cover optional malleable iron on EFS-M Series. Spring-loaded cover seats against neoprene gasket.
U-Line Factory Sealed 20 Amp Plugs and Receptacles Dead-Front Safety Construction. Choice of Aluminum or Thermoplastic Polyester Plug. Class I, Division 1 and 2 Groups B, C, D NEMA 3, 3R, 7BCD, 9FG Applications
SURFACE/CEILING & SUSPENDED MOUNT INSTALLATION
SURFE/CEILING & SUSPENDED MOUNT INSTALLATION E477827 E477827 APPLICATION NL luminaires are designed for use indoors, outdoors, wet locations, areas containing moisture, dirt, corrosion, vibration and rough
WFH LED SERIES L E D. High-Bay Lighting for Hazardous & Wet Locations
WFH LED SERIES W FH High-Bay Lighting for Hazardous & Wet Locations Class I, Division 2, Groups A, B, C, & D Class II, Division 2, Groups F & G Class III UL 844 Hazardous Locations UL 1598 Wet Locations
ELECTROGALVANIZED ALUMINUM ACRYLIC PAINTED FERALOY IRON ALLOY
EDSC210 -Way Switch Cooper Crouse-Hinds Catalog Number Manufacturer Description Weight per unit Product Category Features Box Type Contact Configuration Current Rating Voltage Rating Material, Color, and
L1L Series. LED Luminaire for Harsh and Hazardous Environments
L1L Series LED Luminaire for Harsh and Hazardous Environments L TI IGH NG HA Z LO C T-slot for easy mounting using a 5/16 or M8 bolt ¾ NPT on 3 sides with Available M20 hub option Removable Ceiling Flush
LED lighting for drilling & marine Pauluhn ZPL LED luminaires. Pauluhn ZPL. LED luminaires for drilling & marine applications
LED lighting for drilling & marine Pauluhn ZPL LED luminaires Pauluhn ZPL LED luminaires for drilling & marine applications Pauluhn ZPL explosionproof LEDs Safe. Reliable. Efficient. Featuring the industry's
Areamaster LED Flood/High Bay Luminaires For Hazardous Locations. 250 W, 400 W, 750 W, 1000 W HID Light Level Equivalent
Class I, Division 2, Groups A, B, C, D Class I, Zone 2 Group IIC Class II, Division 1, Groups E, F, G Class II Division 2, Groups F, G Class III Simultaneous Exposure Type 3R, 4, 4X IP66/67 Applications
Prismalume. Enclosed HOLOPHANE
HOLOPHANE Prismalume Enclosed PRISMATIC GLASS REFLECTORS WITH TEMPERED GLASS CLOSURES ENSURE A LONG LASTING, DURABLE LIGHTING LUMINAIRE. A FULL RANGE OF WATTAGES AND LAMP TYPES COUPLED WITH AN ASSORTMENT
Lighting: Fluorescent Lighting FL Series: Light Duty Nonmetallic Fluorescent Lighting Fixtures, Standard and Emergency Battery Back-Up Zone 2 & 22
FL Series: Light Duty Nonmetallic Fluorescent Lighting Fixtures, Standard and Emergency Battery Back-Up 2 x 58 W 2 x18 W Compliance Data: ATEX IEC: Zone 2 22 ATEX IEC CE Ex nr II or na II T6 or T5 or T4
Receptacle housing and cover optional malleable iron on EFS-M Series. Spring-loaded cover seats against neoprene gasket.
U-Line Factory Sealed 20 Amp Plugs and Receptacles Dead-Front Safety Construction. Choice of Aluminum or Thermoplastic Polyester Plug. Class I, Division 1 and 2 Groups B, C, D NEMA 3, 3R, 7BCD, 9FG Applications
C1D1 Solar Powered Explosion Proof LED Strobe Light - 20' 16/2 SOOW Cord - C1D2 Panel
C1D1 Solar Powered Explosion Proof LED Strobe Light - 20' 16/2 SOOW Cord - C1D2 Panel Part #: EPSLED-80-SOL-80C-C1D2-20C-MOD1 Page: 1 Made in Texas The EPSLED-80-SOL-80C-C1D2-20C-MOD1 Solar Powered Explosion
Twist Lock - Explosion Proof - Dust Ignition Proof Receptacle Assembly
Twist Lock - Explosion Proof - Dust Ignition Proof Receptacle Assembly Part #: EPO-25A The Larson Electronics EPO-25A explosion proof power outlet provides a durable and secure weatherproof power connection
Variety of mounting methods. UL, CUL, and CSA listed for general and hazardous locations
PREDATOR The Predator floodlight offers versatility, efficiency, and performance, which provides a unique solution to a variety of lighting needs. With the Predator, Holophane continues its legacy of utilizing
150 Watt Explosion Proof LED Flood Light - Surface Mount - 17,500 Lumens - C1D2-25ft Cord
150 Watt Explosion Proof LED Flood Light - Surface Mount - 17,500 Lumens - C1D2-25ft Cord Part #: EPLC2-LED-150W-RT-JB2-25C The Larson Electronics EPLC2-LED-150W-RT-JB2-25C Explosion Proof LED Flood Light
Form 85 Unilets Conduit Outlet Bodies, Covers and Gaskets For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit.
For use with Rigid Steel, Rigid Aluminum, IMC, and EMT Conduit. NEC/CEC Suitable for use in the following Applications Serve as pulling fittings. Make bends in conduit system. Provide openings for splicing.
Spring-loaded cover seats against neoprene gasket.
U-Line Factory Sealed 20 Amp Plugs and Receptacles Dead-Front Safety Construction. Choice of Aluminum or Thermoplastic Polyester Plug. Class I, Division 1 and 2 Groups B, C, D NEMA 3, 3R, 7BCD, 9FG Plugs
www.greenelectricalsupply.com Page 1 of 4 The HLR SERIES hazardous location family of fixtures is suitable for use in a wide range of indoor and outdoor Class I Division 2 applications. Available in eight
PEERLESS BLOWERS DIRECT DRIVE BLOWERS
PEERLESS BLOWERS DIRECT DRIVE BLOWERS PEERLESS BLOWERS DIRECT DRIVE BLOWERS APPLICATION: Used extensively for general ventilation of small areas where duct systems are required. Used for washrooms, restaurants
24W Explosion Proof POE Injector - Adds Power Over Ethernet Functionality to 24V POE Equipment - 1A
24W Explosion Proof POE Injector - Adds Power Over Ethernet Functionality to 24V POE Equipment - 1A Part #: EXP-IP-POE-INJ-24V-24W Page: 1 The EXP-IP-POE-INJ-24V-24W from Larson Electronics is an Explosion