ALUMINUM OUTLET BODIES

Transcription

1 KILLARK GEB SERIES ALUMINUM OUTLET BODIES * Class I, one I, Groups IIC, IIB, IIA Type 4X Applications GEB series conduit boxes are installed in conduit systems within hazardous areas to: Protect conductors in threaded rigid conduit Act as pull and splice boxes Interconnect lengths of conduit Change conduit direction Provide access to conductors for maintenance and future system changes Features C Type Suitable for NEMA 4X applications Integral mounting lugs Green ground screw standard External cover thread on body plus smooth integral hub bushing protects conductor insulation when pulling 4 different hub arrangements Taper threaded hubs provide ground continuity External threaded body for additional wiring room Covers and gaskets furnished with boxes as standard 4 cored holes supplied inside casting for #.32 self tapping screws for mounting devices as standard Factory Modification Back and wall (mounting pad area) suitable for drilling 1/2 or 3/4 NPT or NPSM w/opening, consult factory Material/Finish Aluminum BODY & COVER Copper-free aluminum (less than 4/10 of 1%) FINISH Electrostatically applied powder Size Ranges L Type Hub 3/4 to Cover opening 3-1/2 C TYPE OUTLET BODY UL Standards: 6 and 1203 CSA Standards: C22.2 No. 30 * hub sizes require seal within 24 for Group B applicatons. CATALOG NUMBER COVER OPENING GEBC-2 3/4 GEBC-3 GEBC-4 1-1/4 GEBC-5 L TYPE OUTLET BODY CATALOG NUMBER COVER OPENING GEBL-2 3/4 GEBL-3 GEBL-4 1-1/4 GEBL-5 5-1/2 (140) 5-1/2 (140) 5-1/2 (140) 5-1/2 (140) 4-21/ /64 C Type L Type F54

2 KILLARK GEB SERIES H A LO C ALUMINUM OUTLET BODIES * Class I, one I, Groups IIC, IIB, IIA Type 4X T Type X Type See page F51 for Standard Materials & Finish Outlet Box for in-line (multiple) stanchion mount fixtures Typical Applications: Coal Conveyors, Cat Walks, Platform Hand Rails T TYPE OUTLET BODY CATALOG NUMBER COVER OPENING GEBT-2 3/4 GEBT-3 GEBT-4 1-1/4 GEBT-5 GEBT-24 GEBT-25 (2) 3/4 (1) 1-1/4 (2) 3/4 (1) * hub size requires seal within 24 for group B applications. X TYPE OUTLET BODY CATALOG NUMBER COVER OPENING GEBX-2 3/4 GEBX-3 GEBX-4 1-1/4 GEBX-5 GEBX-25 (3) 3/4 (1) GEBT-25 with two 3/4 feed-thru hubs and one vertical hub T Type X Type F55

3 KILLARK GEB SERIES GR with Cover INSTRUMENT / DEVICE UL / CSA / ATEX / IECEx - File E3969 Certified - LR11716 Sira 12ATEX1243U IECEx SIR U Class I, one 1 & 2, Groups IIC, IIB, IIA Enclosure Type 3, 4 & 4X IP II 2 G D Ex d IIC Gb Ex e IIC Gb Ex t IIIC Db Ta = -40 C to +163 C* IP66 Applications GEB-EX SERIES is designed to house small instrumentation or devices for installation in a classified or a zone designated hazardous location anywhere on the GLOBE today. Typical types of intruments are transmitters, monitors, detectors, measurement devices, relays and other control devices. The GEB-EX SERIES enclosures are suitable for a broad range of GLOBAL APPLICATIONS meeting both domestic and international electrical code requirements. Features Body opening Dia. x deep. Cover o-ring supplied as standard for TYPE 4X AND IP66 applications. Available in 4 configurations, C, L, T & X with 1/2 THROUGH NPT TAPER THREADED S providing ground continuity. Smooth integral hub busing to protect conductor insulation when pulling. External cover threads on the body protecting conductors from damages during pulling. No pinching of conductors during cover installation. One internal & two external grounding (earthing) connections Boxes have integral mounting lugs. Lugs on cover permit easy removal and tightening. Materials Box & cover: Copper free aluminum (less than 4/10 of 1%) Finish: Electrostatically applied powder Grey O-Ring Gasket Material: Nitrile compound Hub Sizes: 1/2 NPT to 1-1/2 NPT Stainless steel tamper-proof locking set screw in cover. X configured cast-in mounting pad. Supplied with 4 corded holes for #-32 self-tapping screws for mounting devices as standard. Units can also be provided with internal customer specified drilling and tapping for OEM device mounting. TYPE TYPE C T GEBC-1-EX GEBC-2-EX GEBC-3-EX GEBC-4-EX GEBC-5-EX GEBT-1-EX GEBT-2-EX GEBT-3-EX GEBT-4-EX GEBT-5-EX GEBT-24-EX GEBT-25-EX 1/2 3/4 1-1/4 1/2 3/4 1-1/4 3/4 1-1/4 3/4 NOTE - 1/2 Hub Size supplied with 3/4-1/2 NPT reducer L X COVER MOUTING A B E OPENING IN 3 / ML CENTERS mm mm Application Example GEBL-1-EX GEBL-2-EX GEBL-3-EX GEBL-4-EX GEBL-5-EX GEBX-1-EX GEBX-2-EX GEBX-3-EX GEBX-4-EX GEBX-5-EX GEBX-25-EX mm 3.5 9mm 4ml 1/2 3/4 1-1/4 1/2 3/4 1-1/4 3/ mm F56

4 KILLARK H A LO C ALUMINUM AND IRON OUTLET BODIES 1/2, 3/4 and Bodiesj Class I, Div. 1 & 2, Groups B, C & D Class I, one 1, Groups IIB, IIA 1-1/4,, and 2 Bodies Class I, Div. 1 & 2, Group D Class I, one 1, Group IIA For Series CSA applications for Class I Group C, seal conduit within 1 inches Type 4 & 4X Applications GE series conduit boxes are installed in conduit systems within hazardous areas to: Protect conductors in threaded rigid conduit Act as pull and splice boxes Interconnect lengths of conduit Change conduit direction Provide access to conductors for maintenance and future system changes Features GEC E Type GE conduit outlet boxes have:, GEC and have water shedding cover suitable for wet locations when mounted in upright position External cover threads on body protecting conductors from damage during pulling No pinching of conductors during cover installation Ten different hub arrangements Taper threaded hubs to provide ground continuity Smooth integral hub bushing to protect conductor insulation when pulling Internally threaded cover openings for additional wiring room Covers furnished with boxes Weather-resistant finish Green ground screw standard in all boxes Material/Finish Aluminum BODY Copper-free aluminum (less than 4/10 of 1%) FINISH Electrostatically applied powder COVER (Aluminum) Copper-free aluminum (less than 4/10 of 1%). Electrostatically applied powder Iron BODY Duraloy iron alloy FINISH Tri-coat finish of electrozinc, chromate sealant, and electrostatically applied powder KILLARK ALUM. DURALOY IRON E Type GECET-1 GECET-1M 1/2 GECET-2 GECET-2M 3/4 GECET-3 GECET-3M COVER (Aluminum) Copper-free aluminum (less than 4/10 of 1%). Electrostatically applied powder Size Ranges Hub 1/2 to 2 E TYPE OUTLET BODY* Cover opening to diameter UL Standards: 6 and 1203 Fed Spec: W-C-56D Mil Spec: F / COVER OPENINGS 1-1/4 ET-5 ET-5M 4-3/ (46) (46) 1 1 j 1/2, 3/4 and GEC Bodies Listed and Certified for: GEC Type E Type F57

5 KILLARK ALUMINUM AND IRON OUTLET BODIES 1/2, 3/4 and Bodiesj Class I, Div. 1 & 2, Groups B, C & D Class I, one 1, Groups IIB, IIA 1-1/4,, and 2 Bodies Class I, Div. 1 & 2, Group D Class I, one 1, Group IIA For Series CSA applications for Class I Group C, seal conduit within 1 inches Type 4 & 4X C Type L Type See page F51 for Standard Materials & Finish UL Standards: 6 and 1203 Fed Spec: W-C-56D Mil Spec: F-26 KILLARK ALUM. DURALOY IRON C-1 1/2 C-2 3/4 C TYPE OUTLET BODY* 2- (71) 2- (71) (79) (79) COVER OPENINGS GECCT-1 GECCT-1M 1/2 1 GECCT-2 GECCT-2M 3/4 1 GECCT-3 GECCT-3M 1-1/ CT-3 CT-3M (12) 4-1/ (7) 1-1/ CT-4 CT-4M 1-1/4 (12) 4-1/ (7) CT-5 CT-5M 4-3/ CT-6 CT-6M 2 4-3/ (3) C Type L-1 1/2 2- (71) L TYPE OUTLET BODY* (79) L-2 3/4 2- (71) (79) GECLT-1 GECLT-1M 1/2 1 GECLT-2 GECLT-2M 3/4 1 GECLT-3 GECLT-3M 1 LT-3 LT-3M (12) 4-1/ (7) 1-1/ LT-4 LT-4M 1-1/4 (12) 4-1/ (7) LT-5 LT-5M 4-3/ (7) L Type LT-6 LT-6M 2 4-3/ (7) (3) j 1/2, 3/4 and GEC Bodies Listed and Certified for: F5

6 KILLARK H A LO C ALUMINUM AND IRON OUTLET BODIES 1/2, 3/4 and Bodiesj Class I, Div. 1 & 2, Groups B, C & D Class I, one 1, Groups IIB, IIA 1-1/4,, and 2 Bodies Class I,Div. 1 & 2, Group D Class I, one 1, Group IIA For Series CSA applications for Class I Group C, seal conduit within 1 inches Type 4 & 4X GEC T Type See page F51 for Standard Materials & Finish UL Standards: 6 and 1203 Fed Spec: W-C-56D Mil Spec: F-26 j 1/2, 3/4 and GEC Bodies Listed and Certified for: T Type X Type LB Type X Type KILLARK DURALOY ALUM. IRON LB Type T-1 1/2 2- T-2 3/4 2- GECTT-1 GECTT-1M 1/2 GECTT-2 GECTT-2M 3/4 GECTT-3 GECTT-3M TT-3 TT-3M (1) TT-4 TT-4M 1-1/4 (1) TT-5 TT-5M TT-6 TT-6M 2 X-1 1/2 2- X-2 3/4 2- GECXT-1 GECXT-1M 1/2 GECXT-2 GECXT-2M 3/4 GECXT-3 GECXT-3M XT-3 XT-3M (1) XT-4 XT-4M 1-1/4 (1) XT-5 XT-5M XT-6 XT-6M 2 LB-1 1/2 2- LB-2 3/4 2- GECLBT-1 GECLBT-1M 1/2 GECLBT-2 GECLBT-2M 3/4 GECLBT-3 GECLBT-3M LBT-3 LBT-3M (1) LBT-4 LBT-4M 1-1/4 (1) LBT-5 LBT-5M LBT-6 LBT-6M 2 T TYPE OUTLET BODY* 2-5/16 2-5/16 4-1/ (7) 4-1/ (7) 4-3/ 4-3/ X TYPE OUTLET BODY* 2-5/16 2-5/16 4-1/ (7) 4-1/ (7) 4-3/ 4-3/ LB TYPE OUTLET BODY* 2-5/16 2-5/16 4-1/ (7) 4-1/ (7) 4-3/ 4-3/ (3) (3) (3) (3) (3) 1-1/ () 1-1/ () 1-1/ () 1-1/ () 1-1/ () 1-1/ () COVER OPENINGS F59

7 KILLARK ALUMINUM AND IRON OUTLET BODIES LA Type XAT XA Type 1/2, 3/4 and Bodiesj Class I, Div. 1 & 2, Groups B, C & D Class I, one 1, Groups IIB, IIA 1-1/4,, and 2 Bodies Class I,Div. 1 & 2, Group D Class I, one 1, Group IIA For Series CSA applications for Class I Group C, seal conduit within 1 inches Type 4 & 4X TA Type CA Type GEC EAT Type See page F53 for Standard Materials & Finish UL Standards: 6 and 1203 Fed Spec: W-C-56D Mil Spec: F-26 KILLARK ALUM. DURALOY IRON LA-1 1/2 LA-2 3/4 LA TYPE OUTLET BODY* 2-2- COVER OPENINGS TA-1 1/2 2- TAT TYPE OUTLET BODY* TA-2 3/4 2- GECTAT-2 GECTAT-2M 3/4 XAT TYPE OUTLET BODY* GECXAT-1 GECXAT-1M 1/2 GECXAT-2 GECXAT-2M 3/4 GECXAT-3 GECXAT-3M TAT Type XAT Type XAT-4 XAT-4M 1-1/4 (12) 4-1/ (7) CAT TYPE OUTLET BODY* CA-1 1/2 2- CA-2 3/4 2- GECCAT-1 GECCAT-1M 1/2 CAT-4 CAT-4M 1-1/4 5-11/16 (144) 4-1/ (7) EAT TYPE OUTLET BODY* CAT Type EAT Type GECEAT-2 GECEAT-2M 3/4 j 1/2, 3/4 and GEC Bodies Listed and Certified for: F60

8 KILLARK GEC SERIES H A LO C OUTLET BODIES WITH MOUNTING FLANGE 1/2, 3/4 and Bodiesj Class I, Div. 1 & 2, Groups C, D Class I, one 1, Groups IIB, IIA GECXTF XTF Type Outlet Body With Mounting Flange GECUET-2 Outlet Body GEUEAT-2 Outlet Body See page F53 for Standard Materials & Features UL Standards: 6 and 1203 Fed Spec: W-C-56D Mil Spec: F-26 Material/Finish Aluminum BODY Copper-free aluminum (less than 4/10 of 1%) FINISH Electrostatically applied powder COVER (Aluminum) Copper-free aluminum (less than 4/10 of 1%). Electrostatically applied powder Iron BODY Duraloy iron alloy FINISH Tri-Coat Finish of Electrozinc, Chromate Sealant, and electrostatically applied powder COVER (Aluminum) Copper-free aluminum (less than 4/10 of 1%). Electrostatically applied powder Size Ranges: Hub 3/4 standard optional 1/2 to contact factory Cover opening or KILLARK ALUM. DURALOY IRON GECXTF-1 GECXTF-1M 1/2 GECXTF-2 GECXTF-2M 3/4 GECXTF-3 GECXTF-3M XTF Type With Mounting Flange GECUET-2 GECUET-2M 3/4 GEUEAT-2 GEUEAT-2M 3/4 XTF TYPE OUTLET BODY* 2- GE TYPE OUTLET BODY* 2-1/ (54) COVER OPENINGS 11 j 1/2, 3/4 and GEC Bodies Listed and Certified for: GECUET-2 Outlet Body GEUEAT-2 Outlet Body F61

9 KILLARK OUTLET BODIES ACCESSORIES GECBC Blank Cover 4GOU Dome Cover GL-3 Lens Cover GECEY Sealing Cover GEC-RG Gasket Material/Finish Copper-free aluminum (less than 4/10 of 1%) Electrostatically applied powder Blank covers are supplied standard on all GE Series bodies Dome covers provide additional wiring room for splicing or accommodating components Clear cover lens for viewing Sealing cover used to convert body into sealing fitting Rubber gasket fits between cover and body to make assembly watertight BC GECBC* GECBCB BC GRM-BC * Available also in iron GECBCM BLANK COVER SERIES GEC marked Groups B, C, D, Type 4X GEC marked Groups B, C, D, Type 4X DOME COVER SERIES CUBIC INCH 2GOU GEC GOU GEC GRMD GRMD 0.0 GL-3 EYj GECEYj EYj EYj -RG GEC-RG GEC-ORG -RG GRM-RG LENS COVER SEALING COVER GASKET SERIES SERIES j Sealing Covers CSA only. Since all Series GE boxes are listed with a blank cover, deduct the price of blank cover and add the price of the desired cover. Outlet bodies listed on preceding page. GEC SERIES GEC Flat GEC O-Ring F62