UNIVERSAL GAUGES. Norminal pitch Double Go or Normina pitch Double Go or Diametr Ended No Go Diametr Ended No Go Go.& 6 g. Go.& 6 g.
|
|
|
- Melina Hunt
- 5 years ago
- Views:
Transcription
1 ISO METRIC THREAD GAUGES 1/1/2013 STANDARDS : BASIC DIMENSIONS :- IS 4218 Part III & IV 1976 : ISO (E) Gauging Practice :- IS : ISO (E) CLASS OF FIT : Screw Plugs :6H(Medium.) Screw Rings : 6G (medium) Applicable for Right Hand Threads. Above 8" on rerquest For non.std.dia.pitch combinations on request Screw plug Screw Ring Screw plu Screw Ring Diametr Ended Diametr Ended
2 PL /Dt-1/1/2013 Screw plug Screw Ring Screw plu Screw Ring Diametr Ended Diametr Ended
3 PL /Dt-1/1/2013 Screw plug Screw Ring Screw plu Screw Ring Diametr Ended Diametr Ended Rs. Rs
4 PL /Dt-1/1/2013 Screw plug Screw Ring Screw plu Screw Ring Diametr Ended Diametr Ended THREAD PLUGS OTHER THAN '6H'CLASS NOTES Add 25% on the price of corresponding '6H' class Thread Plug. LEFT HAND THREAD PLUGS Add 25% on the price of THREAD RINGS OTHER THAN '6g'CLASS. corresponding RIGHT HAND thread Nom.Dia.up to 25mm, Add 30% on the price of Plug. corresponding '6g'class Thread Ring. LEFT HAND THREAD RINGS Nom.Dia.over 25mm, Add 20% on the price of Add 20% on the price of corresponding '6g'class Thread Ring. corresponding RIGHT HAND thread
5 Ring. UNIFIED THREAD GAUGES STANDARDS : BASIC DIMENSIONS :- BS:1580:1962 ANSI B PL /Dt-1/1/2013 Gauging Practice :-BS 919 Part 1 : 1960 CLASS OF FIT : Screw Plugs :2B(Medium.) Screw Rings :2A (Medium) Screw plug Screw Ring Norminal pitch Double Go or Screw plug Screw Ring Diametr Ended Norminal pitch Double Go or Go.& 6 g. Diametr Ended Go.& 6 g. Rs. Rs UNC Rs. Rs. 48 UNF /8" 9 UNC UNC UNF UNF UNEF UNC " 8 UNC UNF UNF /16" 12 UN UNF UN UN UNEF UNEF UNC /8" 7 UNC UNF UNF UNC UN UNF UNEF UNC /4" 7 UNC UNF UNC UNEF UNF /16" 12 UN UN UN UNEF /4" 20 UNC UN UNF /8" 6 UNC UNEF UN /16" 18 UNC UNF UNF UN UNEF UNEF /8" 16 UNC UN UNF /2" 6 UNC UNEF UN /16" 14 UNC UNF UNF UN /2" 13 UNC UNEF UNF UN UNEF /8" 8 UN /16" 12 UNC UN UNF UN UN UNEF UNEF UN /8" 11 UNC /4" 5 UNC
6 18 UNF UN UN UN UNEF UN /16" 8 UN UN UNC /16" 8 UN UN UN UNEF UN UN UNEF /4" 10 UNC UN UNF /16" 16 UN UNEF UNEF /16" 16 UN /8" 8 UN UN UN UNEF UN /16" 16 UN UN UNEF " 4.5 UNC UN UN UN UN Screw plug Screw Ring Norminal pitch Double Go or PL /Dt-1/1/2013 Diametr Ended Go.& 6 g. Screw plu Screw Ring Normina pitch Double Go or Diametr Ended Rs. Rs. Go.& 6 g. 2.1/4" 4.5 UNC UN UN Rs. Rs. 16 UN /2" 4 UNC /8" 8 UN UN UN UN UN UN /2" 4 UNC /4" 4 UNC UN UN UN UN UN UN /8" 8 UNC " 4 UNC UN UN UN UN /4" 4 UNC UN UN " 4 UNC UN UN UN UN /8" 8 UN UN UN " 4 UNC UN UN " 4 UNC UN UN UN UN " 4 UNC UN UN /4" 4 UNC UN
7 8 UN UN UN " 4 UNC UN UN UN THREAD PLUGS OTHER THAN '2B'CLASS 16 UN Add 20% on the price of corresponding '2B' class Thread Plug. LEFT HAND THREAD PLUGS Add 25% on the price of THREAD RINGS OTHER THAN '2A'CLASS. corresponding RIGHT HAND thread Nom.Dia.up to 1" Add 30% on the price of NOTES plug corresponding '2A'class Thread Ring. LEFT HAND THREAD RINGS Nom.Dia.over 1" Add 20% on the price of Add 20% on the price of corresponding '2A'class Thread Ring. corresponding RIGHT HAND thread ring BSW- BSF THREAD GAUGES STANDARDS : BASIC DIMENSIONS :- BS:84:1962 Gauging Practice :-BS 919 Part 2 : 1971 CLASS OF FIT : Screw Plugs :(Medium.) Screw Rings :(Medium) PRICES : Applicable for Right Hand Threads. Above 1.1/2" on request. For non- std. dia-pitch combinations on request Screw plug Screw Ring Screw plug Screw Ring Norminal pitch Double Go or Norminal pitch Double Go or Diameter Ended Diameter Ended 1/8" 40 BSW /8" 11 BSW /16" 24 BSW BSF BSF /4" 10 BSW /4" 20 BSW BSF BSF /8" 9 BSW /16" 18 BSW BSF BSF " 8 BSW /8" 16 BSW BSF BSF /8" 7 BSW /16" 14 BSW BSF BSF /4" 7 BSW /2" 12 BSW BSF BSF /2" 6 BSW BSF B.S.CYCLE THREAD GAUGES STANDARDS : BASIC DIMENSIONS :- BS811:1950 Gauging Practice :- BS 919 Part 2 : 1971 T.P.I PLUG RING T.P.I PLUG RING 1/8" /2" /32" /16" /16" /8"
8 7/32" /16" /4" /4" /32" " /16" /4" /8" /2" /16" " " 24 RH THREAD PLUGS OTHER THAN '2B'CLASS LEFT HAND THREAD PLUGS Add 20% on the price of corresponding Add 25% on the price of '2B' class Thread Plug. corresponding RIGHT HAND thread plug THREAD RINGS OTHER THAN '2A'CLASS. LEFT HAND THREAD RINGS Nom.Dia.up to 1" Add 30% on the price of NOTES Add 20% on the price of corresponding '2A'class Thread Ring. corresponding RIGHT HAND thread Nom.Dia.over 1" Add 20% on the price of corresponding '2A'class Thread Ring. G- Series (Formerly BSP-F) THREAD GAUGEring STANDARDS : BASIC DIMENSIONS:- BS 2779 :1973 IS : ISO 228(PT.I-1982 (E) Gauging Practice :-BS 919 Part 2 : 1971 IS : ISOPL /Dt-1/1/2013 CLASS OF FIT : Screw Plugs :General,Screw rings :General (B), Close (A) PRICES : Applicable for Right Hand Threads. Note : Rings are supplied to class 'B' unless class 'A' is specially requested Screw plug Screw Ring Screw plu Screw Ring Diameter Ended Diameter Ended G 1/16" G 1.1/4" G 1/8" G 1.3/8" G 1/4" G 1.1/2" G 3/8" G 2" G 1/2" G 2.1/2" G 5/8" G 3" G 3/4" G 4" G 7/8" G 5" G 1" G 6" G 1.1/8" NGT TAPER THREAD GAUGES STANDARDS : BASIC DIMENSIONS & GAUGES PTACTICE TO IS : 9121 :1979 PRICES : For Right Hand Threads only. Note : Calibration Certificate will be issued with each Gauge
9 PLUG RING Nominal Threads Gauge Gauge Gauge Gauge Diameter Per inch B(L1) A(L9) E(L1) D(L8) 3/4" NPT TAPER THREAD GAUGES STANDARDS :BASIC DIMENSIONS & GAUGES PTACTICES : ANSI/ASME B : NBS H-28 PPL /Dt-1/1/2013 CLASS OF FIT : Basic/ Step Limit Note : Calibration Certificate will be issued with each Gauges PLUG RING L1 L1 L1 L1 TPI BASIC Min/Basic/M BASIC Min/Basic/Max 1/16" /8" /4" /8" /2" /4" " 11.1/2" /4" 11.1/2" /2" 11.1/2" " 11.1/2" /2" " /2" " /2" " " " Note:For NPTF Taper thread Gauges add 20% R/RC TAPER THREAD GAUGES STANDARDS : BASIC DIMENSIONS :- BS 21 :1985 IS : IS: Gauging Practice :- BS 21 : 1985 CLASS OF FIT : Screw plugs : System B, Screw Rings : System B PRICES : For Right Hand Threads only. PL /Dt-1/1/2013 For System A on request. NOTE : Calibration Certificate will be issued with each Gauges
10 Screw plug Screw Ring Screw plu Screw Ring Diameter Ended Diameter Ended R 1/6" R1.1/2" R1/8" R2" R1/4" R2.1/2" R1/2" R3" R3/4" R4" R R5" R1.1/4" R6" CERTIFICATE OF CALIBRATION CHARGES PARTICULARS RANGE RANGE RANGE RANGE UPTO 20MM 21MM TO 40 MM 1.5/8"TO4" ABOVE 4" TO ' UPTO 3/4" ABOVE 3/4"TO 41 TO 100MM 101 MM TO 1.1/2" 150MM PARALLEL,D/E THREAD PLUG RS.300 RS.300 RS.350 RS.510 THREAD RING GO OR NOT GO RS.350 RS.450 RS.560 RS.1000 TAPER, TAPER THREAD PLUG RS.380 RS.450 RS.560 RS.920 TAPER, TAPER RING RS.600 RS.760 RS.960 RS.1400 Note:- Gauges are calibrated in an air -conitioned Standards Room maintained at 20c +1 C. Gauge above 6" on request.
NOTES FOR PLUG 30% RINGS UPTO 24MM 40% RINGS ABOVE 24 MM 40% 8) FOR LEFT HAND GAUGES ADD TO BASIC LIST PRICE.
NOTES 1) THIS PRICE LIST IS RIGHT HAND GAUGES ONLY. 2) PRICE INDICATED FOR PLUG ARE FOR A DOUBLE END CONSISTING OF GO & NOGO 3) PRICE INDICATED FOR RINGS ARE OF GO OR NOGO 4) PRICE FOR SINGLE ENDED GO
(Click on the links below for the category contents) YONG. Custom Hex Plain Plug Gages.. Page 29. Custom Cylindrical Plain Ring Gages...
VER: YG1404 Thread Plug Gages - Inch - Taperlock Style Page 2-3 Thread Plug Gages - Inch - Reversible Style. Page 4 Thread Ring Gages - Inch... Page 5-6 Thread Plug Gages - Metric - Reversible Style...
Accuracy Build Credibility
Geeta Engineering Works Accuracy Build Credibility Home Geeta Engineering Work is leading manufacturing Co. in India, Providing measuring instrument across the global. We are providing instrument of MESURING
STAR TOOL SUPPLY / GRAND TOOL SUPPLY
HOLE LOCATION PLUG GAGES SERIES 200: THREAD PLUG GAGES SERIES 635: All diameters concentric within.0001 T.I.R. Shaft dia. (C).2500 +.0002, -.0000 on all gages to simplify calculation of hole spread. Shaft
List Ideal for Steels, Exotics and Difficult to Machine Materials. Type 5 (Lc=1 Thread) Type 6 (Lc=3 Threads) Miniature, Helical Flute
List 41200 Miniature, Helical Flute P450 Size Threads Cutter Dia. Overall Neck Shank Dia. No. of Per Inch D L Lc L1 d 0 80 0.045 1.625 0.013 0.165 1/8 3 5 4120000115 1 72 0.055 1.625 0.016 0.198 1/8 3
CMT Vertical Mill-Thread
CMT Vertical Mill-Thread Carmex presents a new family of vertical thread milling indexable inserts and toolholders to perform a wide variety of threads. Advantages of CMT - Vertical Mill-Thread Ground
Solid Carbide Thread Milling
Solid Carbide Thread Milling 07 - '06 Contents Page GRADES OF COMBIDEX SOLID CARBIDE THREAD MILLS Micrograin 4 Order Example 4 ISO - Metric Thread 6O 5 ISO - Metric Fine Pitch Thread 6O 5 ISO - Metric
Solid Carbide Thread Milling
Ordering Code Standard Fine D D L L T Height Pitch/mm Solid Carbide Thread Milling Contents Information Page - ISO Metric & External Thread Page - 2 ISO Metric Pitch & Fine Pinch External Thread 60º Page
Product features. only RS. Application-specific features RS. Indication for the RS UNF. 400 C max. 200 C. Lifting points ready for bolting RS RM
Lifting points ready for bolting > WLL in comparison to DIN 580/582 Clear marking of the minimum WLL Large thread and WLL range M, MF, UNC, UNF, 8UN, BSW, G 0.1 t 8 t Product features High-strength octagon
SOCKET HEAD CAP SCREWS METRIC SERIES M3-M36 RECOMMENDED RETAIL PRICES IN RUPEES PER 100 PIECES INCLUSIVE OF EXCISE DUTY & OCTROI
Dia. M3 2.5mm SOCKET HEAD CAP SCREWS METRIC SERIES M3-M36 M4 3mm M5 4mm M6 5mm M8 6mm 5 1430 1250 6 1230 1250 1400 1430 8 910 940 960 985 1210 10 755 740 535 620 1100 12 755 670 540 655 840 1260 16 790
PLAIN RING THREAD RING TRUNCATED SET PLUG TAPERLOCK THREAD PLUG TAPERLOCK PLAIN PLUG TAPER PIPE PLUG REVERSIBLE PLAIN PLUG REVERSIBLE THREAD PLUG
THREAD RING TRUNCATED SET PLUG TAPER PIPE PLUG REVERSIBLE THREAD PLUG REVERSIBLE TRILOCK THREAD PLUG PLAIN RING TAPERLOCK THREAD PLUG TAPERLOCK PLAIN PLUG REVERSIBLE PLAIN PLUG REVERSIBLE TRILOCK PLAIN
SPIRAL POINT TAPS for through hole tapping
SPIRAL FLUTE TAPS for blind hole tapping Ideally suitable for blind hole tapping in most materials, particularly aluminium, brass, copper and similar metals. The build up of swarf at the bottom of the
OMT Technical Information Shaft Version
A: Cylindrical 40 shaft C: Parallel key A12 8 70 DIN 6885 Keyway deviates from standard B: Cylindrical 1.5 in shaft D: Parallel key 3 /8 3 /8 2 1 /4 in B.S. 46 Keyway deviates from standard 45 C. Involute
Introduction. Sparkplug / Plugsaver Kits
RECOIL 2013 Introduction Standard Kits Standard Kits Sparkplug / Plugsaver Kits Replacement Insert Packets for Kits and Merchandiser Replacement Insert Packets for Kits and Merchandiser Range Kits Re-grip
TOTEM HSS HAND / SHORT MACHINE / LONG SHANK MACHINE TAPS
PRICE LIST EFFECTIVE 04.02.2018 TOTEM HSS HAND / SHORT MACHINE / Forbes & Company Limited TOTEM HSS HIGH PERFORMANCE TAPS (AS PER IS - 6175 / 1977 BS 949 / 1976) SPIREX XL Bright Gold Xl Gold Size In MM
E R H 10 (N) - 11 (C) 1
Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank
Thread and Connector Identification
How to Use this Section This section is intended as an aid to identifying the most popular threads on hydraulic hose couplings and adaptors, and hydraulic equipment. BSP, Metric, American and Japanese
E R H 10 (N) - 11 (C) 1
Code System Holder Code System E R H 10 (N) - 11 (C) 1 2 3 4 5 6 7 Holder Type Hand Of Insert Name Height Of Shank Shim Insert Size Clamping System 1 Holder Type E R H 10 (N) - 11 (C) 4 Height Of Shank
LEADER CORPORATION CATALOG
LEADER CORPORATION CATALOG Release: 2012 Contacts: Justin Arcari Mike Arcari 51644 Filomena Drive Shelby Township, MI 48315 p. 586.566.7114 f. 586.566.7115 www.leader-corp.com 51644 Filomena Drive Shelby
PRODUCT NEW PRODUCT RANGE *PRICES OF ABOVE PRODUCTS ARE AVAILABLE ON REQUEST THE WORLD LEADER DURLOK BOLT DURLOK NUT UNBRAKO TENSION CONTROL BOLT
NEW PRODUCT RANGE PRODUCT DURLOK BOLT Property Class 2.9 Metric M To M20 Length 2mm To 00mm Size Range Inches - EQUIVALENT STANDARD AS PER UNBRAKO STANDARD DURLOK NUT 2 M To M20 - AS PER UNBRAKO STANDARD
THREADING. Korloy threading tools are available for machining various shapes of thread at various pitches while ensuring high quality performances
THREAING Korloy threading tools are available for machining various shapes of thread at various pitches while ensuring high quality performances 1 Code System 02 Holder Code System 02 Insert Code System
Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving.
Edition 2015-10 Scandinavian Tool Systems AB is a Swedish based manufacturer and supplier of tools for thread turning, thread milling, parting off and grooving. The main product is the QuadCut, which on
Mill - Thread Inserts and Kits
Mill - Thread s and Kits Mill-Thread tools for threading on CNC milling machines by using helical interpolation programs Advantages of Mill-Thread Tools Same toolholder and insert can produce both right-hand
D24. American ACME D02 D25 D26 D28 D28. UNJ (Unified Constant Thread) American Buttress (ABUT) British Buttress (BBUT) D09 D29 D30 D30 D30
3 Code System 02 Holder Code System Thread Inserts 24 American ACME 02 Insert Code System 25 Stub ACME 03 Technical Information for 26 28 28 UNJ (Unified Constant Thread) American Buttress (ABUT) British
ThreadMill. For Thread Milling
ThreadMill For Thread Milling Scandinavian Tool Systems Scandinavian Tool Systems AB Our business idea is to offer the best rigid threading system to our customer and to be in the front line of cutting
Available manual, pneumatic, and hydraulic spool control kits.
Fitted with a main pressure relief valve and a load check valve on every working section. Available with parallel circuit. Optional carry-over Variety of port valves (auxiliary valves) Available manual,
HYDRAULIC MOTORS MLHH
HYDRAULIC APPLICATION» Conveyors» Feeding mechanism of robots and manipulators» Metal working machines» Textile machines» Machines for agriculture» Food industries» Mining machinery etc. CONTENTS Specification
CUP POINT M3 - M16 15
INDEX TRIVALENT METRIC ZINC PLATED SOCKET SCREWS PAGE TECHNICAL INFORMATION 3 DIMENSIONAL INFORMATION 4-5 M3 - M8 6 M10 - M24 7 TECHNICAL INFORMATION 8-9 M3 - M10 10 M12 - M24 11 TECHNICAL INFORMATION
TAPS & DIES S.T.I. TAPS - HIGH SPEED GROUND MACHINE SCREW SIZES FRACTIONAL SIZES
S.T.I. TAPS - HIGH SPEED GROUND High quality tap S.T.I. taps are oversize to rethread damaged threads Available in plug and bottoming style only MACHINE SCREW SIZES Plug Bottom Nominal H # of Thread Overall
ENGINEERING DATA. High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series. w w w. F l u i D y n e F P. c o m
ENGINEERING DATA High Torque, Low Speed Motors H, S, 2000, 6000, and 10,000 Series Interchangeable with: Charlynn White Ross Parker Danfoss w w w. INDEX Cross Reference Guide...2 Introduction...3 H-Series...4
ISO, SAE, DIN, JIS, BS, NF
Balfit Hyraulic Fittings The range of Balfit hyraulic hose connectors is prouce accoring to Balflex specifications an to ISO, SAE, IN, JIS, BS, NF an other stanars. It covers a very wie variety of applications
37 flare couplings to ISO
Applications Widely used throughout the world, 37 flare couplings are designed for most medium pressure mobile and stationary applications. These couplings are characterized by easy, compact assembly and
Threadmill Nomenclature TMR N L ISO C
Threami Nomencature 1 2 3 4 5 6 7 8 TMR N 16 139 40 2.5 ISO C 1 - ine TMR - Heica Futes MR - Heica Futes TMS - Straight Futes 2 - Too Type 3 E - Externa Threa N - Interna Threa X - Externa an Interna 3
Threadmill Nomenclature TR N L ISO C
Threami Nomencature 1 2 3 4 5 6 7 8 TR N 16 139 40 2.5 ISO C 1 - ine TR - Heica Futes TS - Straight Futes 2 - Too Type 3 E N - Externa Threa - Interna Threa 3 - Too Shank ia. 04-4.0 mm 06-6.0 mm 08-8.0
Conversion Factors 1
Engineering Data Index Sect Title 1 Conversion Factors 2 Fraction - Decimal - Metric 3 MM to Inch to MM Conversion 4 Drill Sizes fraction/metric/no 5 Cutting Speeds 6 Spanner Sizes 7 Wood Screws 8 Self
Bluechip Tooling td Tel Table of Content Type Page range Metric M with chamfer M3 - M20 M5 - M Metric
Bluechip Tooling td info@bluechiptooling.co.uk Tel 024 7647 4819 Circular Milling Cutters in Solid Carbide Version -Coating Uncoated Types Best Prices Best Endurance from Ø 4 Short processing times by
Tap and Drill Bit Selection Guide
148 2012/2013 Power Tools & Accessories Catalog Tap and Drill Bit Selection Guide American Standard and Unified Form Threads Tap drill size is approximately 7% of threaded depth. Thread Nominal Size Standard
Ø5 (Ø.20) S12,65 x 1,5. M16 x 1,5 * 2 Special thread: buttress thread S12,65 x 1,5. Max. Working Pressure: 400 bar / 5801 PSI Burst Pressure:
Test Hoses SMS / SS + Working Pressure up to 630 bar / 9135 PSI Technical Data for Test Hose A B (Stard Version) C D Nominal Bore () (mm) Max. Working Pressure (PN) (bar / PSI) 00 / 5801 630 / 9135 30
TESA IMICRO capa µ system with Digital Display
DIN 86 T4 (Style C1) 0,001 0.0005 in TESA IMICRO capa µ system with Digital Display A successful combination of the TESA patented capacitive measuring system with the IMICRO unique cone. Metric/inch Conversion
Static Pressure Manifolds M25, M25A, M25B, M251 and M251B
Product Overview The M25, M25A, M25B, M25 and M25B are versatile two-valve manifolds with a variety of inlet and outlet connections. Lightweight and with compact dimensions, M25/M25 manifolds enable isolation,
PRODUCT SELECTION GUIDE
PRODUCT SELECTION GUIDE Product Tensile Strength Property Class Diameter Size Range Length Evaluant Standard Psi Min N/mm Metric Inch* Metric Inch* IS ISO DIN BS ANSI JIS Hex Head Bolts/Screw 800/830 (8.8),0
TPI NO. OF DIA. THREAD EDP NO. SIZE UNC UNF FLUTES LIMIT LENGTH OAL SETS TAPER PLUG BOTTOM
Straight Flute Hand Taps Straight Flute hand taps are used for hand tapping and machine tapping in through holes or blind holes Available in sets, taper (8-10 thread chamfer), plug (3-5 thread chamfer)
P.F. Hexagon Head Bolts/Screws
Metric Series-Dimensions 1. The bolts and screws will generally conform to IS : 1364, ISO 4014, ISO 4017 and DIN 931/933.. Threads will conform to class 6g of IS : 418, Coarse Series. 3. Material : Panchsheel
Alcalab Private Limited, 3rd Floor, Ashiana Trade Centre, Adityapur, Jamshedpur, Jharkhand. Discipline Mechanical Calibration Issue Date
Last Amended on - Page 1 of 11 I. DIMENSIONS 1. SLIP 0.5 mm to 25 mm 0.25 μm Using Slip Gauge (K-Grade) & > 25 mm to 50 mm 0.34 μm Double Probe Comparator > 50 mm to 75 mm 0.46 μm > 75 mm to 100 mm 0.58
turning and milling tools
turning and milling tools threading grooving boring threading solutions METR WHAT S helicool family Helicool Helical Flutes with Thru-hole coolant in this catalog NEW SOID CARBIDE TOOS Helicool-R (HCR)
Aluminium and (-2)* aluminium casting alloys *() * emulsion (long-chip) **
System components for installation Standard range of HELICOIL plus manual and machine taps Range of types Recommended guide values Manual Machine tap tap Through hole Blind hole Cutting Cooling All hole
10,000 Series. Highlights C-6
Highlights Features higher flows Benefits demanding mobile and industrial applications from Applications Description This is the biggest disc valve motor of our line with up to 45 GPM and 24,000 in-lb
Lubrication Fittings. 1/4"-28 Taper Thread Fittings
1/4"-28 Taper Thread Fittings Used on most cars and trucks and many industrial machines. It is recommended that SAE-LT taper threads be assembled into 1/4"-28 UNF, Class 3B, straight threaded holes having
6000 Series. Highlights C-5. Description With torque up to 15,000 in-lb and 40 gpm continuous, this motor is packed with power operates very smoothly.
Highlights Features 9 displacements available Presents a multitude of options that make this motor very smart and flexible to apply Benefits Very tough motor for demanding applications Can be used in a
VIS 40 Series Two-speed
Specifications Back Pressure Relief Shuttle Selector Plate Plate Balance Plate Face Seal Mounting Flange End Cap Front Retainer Seal Guard Output Shaft Selector Geroler Drive Bearings Shaft Seal VIS 40
How to Identify Fluid Ports and Connectors
How to Identify Fluid Ports and Connectors Foreword Accurate identification of ports and connectors in fluid piping systems is necessary before the correct hose or tube assembly can be selected and installed.
6000 Series Highlights
Highlights Features 9 displacements available Presents a multitude of options that make this motor very smart and flexible to apply Benefits Very tough motor for demanding applications Can be used in a
ORV-M45. Contents. Additional Informations
Contents Working Conditions 3 Dimensional Data 4 Hydraulic Circuit 5 Performance Data And Curve 7 Inlet Relief Options 8 Ordering Codes 9 Spool Options 11 Spool Positioners Side of Return 14 Spool Positioners
BML S K IFP BML HIGH TORQUE LOW SPEED MOTORS. Model code. Model. High Performance in an economical package
IFP HIGH TORQUE LOW SPEED MOTORS High Performance in an economical package International motors provide high output torque from an efficient compact design. Motors are available with displacements from
WHITE MOTORS. Features. Max Torque lb-in (Nm) Cont. Inter. *Stall
Due to its case drain design, the Series motor is an excellent medium size motor for applications with high duty cycles or frequent direction reversals. The case drain design produces a number of benefits
NIAGARA CUTTER THREAD MILLING THREAD MILLS
NIAGARA CUTTR THRAD MILLING THRAD MILLS 1 THRAD MILLS NTM100UN - Inch 3 NTM120UN - Inch 4 NTM160UN - Inch 5 NTM200UN - Inch 6 NTM400MI - Metric 7 CUTTING DATA Inch & Metric 8-9 Technical Info 10-11 THRAD
US version. Drain connection
Versions OMT Versions Mounting flange Standard flange Shaft Port size Europea n version US version Drain connection Check valve Low pressure release High pressure release Cyl. 4 mm G 3/4 X Yes Yes OMT
Disc Valve Hydraulic Motors Series 6000
Disc Valve Hydraulic Motors Series 6000 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Features 9 displacements available Presents a multitude
Specifications R & RX Lanco
Lanco die heads are revolving tools designed for hand-operated, semi-automatic, and automatic threading machines Wide range coverage for threading diameters 1/4 to 9-1/4 (6 to 235 mm) Heads available for
SINGLE VANE PUMPS. BH*, V* and DT6/7 single vane pumps DATA SHEET
SINGLE VANE PUMPS BH*, V* and DT/7 single vane pumps BH* SINGLE VANE PUMPS BH*SINGLE VANE PUMP ORDERING CODE F BHQ 7 D 1 A 1 7 1- F means special seals for fire-resistant fluids. Omit if not required.
Disc Valve Hydraulic Motors
Disc Valve Hydraulic Motors State of the art motors benefiting from years of experience and inovating constantly to fit your demands. C-i Disc Valve Hydraulic Motors Highlights Product Description In the
DISC VALVE HYDRAULIC MOTORS
LHS LH LHV DISC VALVE HYDRAULIC CONENS Page Hydraulic otors Series LHS... 4 Hydraulic otors Series LH... 2 Hydraulic otors Series LHV... 9 Hydraulic otors Series LHHW... 1 otor Special Features... 7 otors
WHITE MOTORS. Max Torque lb-in (Nm) Cont. Inter. *Stall
The Series motor is the leader in its class, offering high efficiency with rugged durability. The three-zone orbiting disk valve, laminated manifold and Roller Stator motor work harmoniously to produce
370/230/UNF 370/330/UNF 370/460/UNF 370/36/UNF 2 370/23/UNF 2 370/16/UNF 2 380/230/UNF 2 380/330/UNF 2 380/460/UNF 2 380/36/UNF 2 380/23/UNF 2
Angle Wheels Buffout Wheels Continued 370/230/UNF 3 8 ⅜ UNF. 24 tpi 230 6 Angle Wheel 8 Angle Wheel 370/330/UNF 370/460/UNF 3 8 ⅜ UNF. 24 tpi 330 3 8 ⅜ UNF. 24 tpi 460 110/230/60 6 60mm 230 110/330/60
Our History Index 1/4" -28 Tapered Thread Fittings 1/4" NPT Fittings
R FITTINGS GREASE GREASE FITTINGS & TRADING CO., INC. 63 AUSTIN BLVD COMMACK NY 11725 TEL: (631)543-4490 FAX (631)543-4496 TOLL FREE: 1-800-669-3962 www.dynatronindustries.com Our History When A&M Trading
Disc Valve Hydraulic Motors Series 4000
Disc Valve Hydraulic Motors Series 0 10.20 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.20 EN EATON_Motoren english Highlights Features 10 displacements, a variety of mounting flanges
The Ultimate Solid Carbide Indexable Drill with a
The Ultimate Solid Carbide Indexable Drill with a Chamfering Option! Replaces Any Cylindrical Solid Carbide or High Speed Steel Drill www.iscar.com Engineered for Chamfering Performance Modular System:
Disc Valve Hydraulic Motors 4000 Compact Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Port B Port A Features Shuttle Valve with Back- Pressure Relief Valve Highlights
HEAVY DUTY HYDRAULIC MOTORS
HEAVY DUTY HYDRAULIC MTRS CNTENTS Page Hydraulic Motors Series MSWM... 4 Hydraulic Motors Series MTK... 8 Hydraulic Motors Series MTM... 17 Hydraulic Motors Series TMF... 9 Hydraulic Motors Series MVM...
IFP BMG HIGH TORQUE LOW SPEED MOTORS
IFP BMG HIGH TORQUE LOW SPEED MOTORS High Performance in an economical package International BMG motors provide high output torque from an efficient compact design.motors are available with displacements
CALIBRATION PRICE LIST
THREADED API STANDOFF SIZE SPEC 5 LINE PIPE $95 ea $150 ea 1/8 4 working 5 12 working $180 ea $290 ea $190 set 1/8 12 masters TUBING (UPTBG & TBG) (EUE & NUE) (1.0500 4 ½ ) $125 ea $190 set Working Masters
Hopkinsons CONTENTS SCHEDULE OF SHELL BOILER MOUNTINGS. Hopkinsons. Safety Valves 5. Boiler Stop Valves 17. Feed Check Valves 18. Blowdown Valves 20
Hopkinsons SCHEDULE OF SHELL BOILER MOUNTINGS Quality assurance Weir Power & Industrial operates quality programmes to cover the full scope of their activities. Comprehensive quality systems have been
Balfit Hydraulic Hose Fittings
Balfit Hyraulic Fittings The range of Balfit hyraulic hose connectors is prouce accoring to Balflex specifications an to ISO, SAE, IN, JIS, BS, NF an other stanars. It covers a very wie variety of applications
Lubrication Fittings. General Information. Alemite Lubrication Fittings include:
General Information 6 Alemite include: Determining Pipe Thread Sizes...3 1/4"-28 Taper Thread...4 1/4"-28 Straight Thread...5 1/8" PTF... 6 1/4" PTF... 8 1/4"-28 and 1/8" Thread Forming...9 Drive... 11
Disc Valve Hydraulic Motors 2000 Series
Disc Valve Hydraulic Motors 10.2014 inspired hydraulics. Änderungen und Druckfehler vorbehalten 10.2014 EN EATON_Motoren english Highlights Port A Features Three zone design for longer life and true bi-directionality.
7/8-14 SAE 1/2" NPT 1/2" BSP Flange Mount BMG 98 BMG 61 BMG 76
IFP HIGH TORQUE LOW SPEED MOTORS High Performance in an economical package International motors provide high output torque from an efficient compact design. Motors are available with displacements from
Datasheet IEC Type T Mineral Insulated Thermocouples with Threaded Pot Type T with threaded pot & tails 316 stainless steel
Datasheet IEC Type T Mineral Insulated Thermocouples with Threaded Pot Type T with threaded pot & tails 316 stainless steel ENGLISH Mineral insulated Type T Thermocouple 316 stainless steel Highly flexible,
Valves For Cryogenic Applications
Valves For Cryogenic Applications Red Dragon has been supplying specialist valve products to all industries for over 20 years and we are proud of our reputation for service, quality and speed of delivery.
Ball Valves Gemels GE2 2-WAY HIGH PRESSURE BALL VALVES. Type and way of valve GE2 2-way high pressure ball valves
Stainless Steel Ball Valves Gemels 34.1.1 GE2 2-WAY HIGH PRESSURE BALL VALVES GE2 stainless steel GE2 G 1/2 DN13 4 4 4 4 A B Type and way of valve GE2 2-way high pressure ball valves Valves dimension of
HEAVY DUTY HYDRAULIC MOTORS
HEAVY DUY HYDRAULIC MRS CNENS Page Hydraulic Motors Series MLHSEM... 4 Hydraulic Motors Series MK... 8 Hydraulic Motors Series MLHM... 17 Hydraulic Motors Series MF... 9 Hydraulic Motors Series MVM...
INDEX METRIC SOCKET SCREWS. Page CAP HEAD SCREWS TORQUE INFORMATION 3
INDEX METRIC SOCKET SCREWS Page CAP HEAD SCREWS TORQUE INFORMATION 3 DIMENSIONAL INFORMATION 4-5 M1.6 - M5 6-7 M12 - M18 8 M20 - M27 9 M30 - M42 10 FINE PITCH CAP - M16 11 LOW HEAD SCREWS TECHNICAL INFORMATION
05. YY XX. XX. series nominal size
Balflex MicroTest Check Line Hoses, Connectors & Gauges Balflex MicroTest is the range of hoses, couplings and gauges for check lines in hydraulic or refrigeration systems. Balflex MicroTest is produced
QuadThread. Internal. For Thread Turning
QuadThread Internal For Thread Turning Scandinavian Tool Systems Scandinavian Tools System AB Our business idea is to offer the best rigid threading system to our customer and be in the front line of cutting
Service Data Vickers. Directional Valves. Wet Armature Solenoid Operated Directional Control Valves DG4V4-01, 1* /EN/0799/S
Service Data Vickers Directional Valves Wet Armature Solenoid Operated Directional Control Valves DG4V4-01, 1* 5050.00/EN/0799/S Spool Table Type Part Number 0 691401 1 691404 2 691400 3 691403 6 691402
How to Identify Fluid Ports and Connectors
How to Identify Fluid Ports and Connectors Accurate identification of ports and connectors in fluid piping systems is necessary before the correct hose or tube assembly can be selected and installed. With
member sizes 0-6 have male point in addition to length shown in the general dimensions on page 162
Thread Plug Gages - Taperlock Features/Benefits: manufactured from select steel ground, accurately lapped, and meticulously inspected in every thread element standard in X tolerance optional color gage
VIS (Valve-In-Star) Hydraulic Motor
VIS (Valve-In-Star) Hydraulic Motor VIS 30 Series VIS 40 Series VIS 45 Series The next step in the evolution of low speed high torque (LSHT) hydraulic motors. EATON Low Speed High Torque Motors E-MOLO-MC001-E5
SERIES HYDRAULIC MOTORS
D9 SERIES HYDRAULIC MOTORS D9 overview The D9 Series of motor is the largest member of the White Drive Product s family. The product is capable of producing torque values comparable to competitive motors,
Thread Milling AM-CAT-THREADMILL(GB)-07/08. Cutters, Inserts and Holders
Thread Milling AM-CAT-THREAMILL(GB)-07/08 Cutters, Inserts and Holders Allied Maxcut Thread Mills FEATURES - Complete programme available of both solid carbide and indexable insert thread mills - Full
Kawasaki Motors Corp., U.S.A. Precision Machinery Division. Staffa Fixed Displacement Hydraulic Motor
Kawasaki Motors Corp., U.S.A. Precision Machinery Division HM(HD)B 270 Staffa Fixed Displacement Hydraulic Motor CONTENTS Page 1. General Description... 2 2. Functional Symbols... 2 3. Model Code... 3
Smart Valve Positioner for Rotary Valve
OVERVIEW Smart Valve Positioner for Rotary Valve Model SVX is microprocessor-equipped, electropneumatic smart valve positioner for rotary valves. The SVX receives a DC current signal from control devices
Kawasaki Motors Corp., U.S.A. Precision Machinery Division HMB 100. Staffa Fixed Displacement Hydraulic Motor
Kawasaki Motors Corp., U.S.A. Precision Machinery Division HMB 100 Staffa Fixed Displacement Hydraulic Motor CONTENTS Page 1. General Description... 2 2. Functional Symbols... 2 3. Model Code... 3 4. Performance
Illston & Robson Limited
Directions From M6/A38M Leave A38M at the middle ring road. At the 4th roundabout go left up the old Coventry Road towards the Blues Ground. Take the 2nd right onto Arthur Street. Turn left and then right
VTR Series Track Roller Assembly V-Grooved Stud Type Concentric Ball & Tapered Roller Bearings
VTR Series Track Assembly V-Grooved Type Concentric Ball & Tapered Bearings VTR-3.50E A B C D F FL G H P SD SL T Type Track Width Groove Center Hex Point Shoulder Shoulder Width + Shoulder VTR-1.50 1.50
Internal Measurement. Internal Measurement C-1
Internal Measurement Internal Measurement C-1 Internal Measurement Internal Measuring and Requirements Internal measuring of bores is more demanding than external measurement of workpieces. Not only the
ng Drilli ng eadi Thr Turni ng illi ders ol H Tool r la ders odu hol M Tool
1 HSS drilling Drilling 2 Solid carbide drilling 3 Indexable insert drilling 4 Reaming and Countersinking 5 HSS taps and dies Threading 6 Circular and Thread Milling 8 Turning Tools Turning 9 EcoCut 10
HPC. Dual Displacement Staffa Radial Piston Motors HT 18 / C / 150 / 1007 / E HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES
HYDRAULIC COMPONENTS HYDROSTATIC TRANSMISSIONS GEARBOXES - ACCESSORIES Via M.L. King, 6-41122 MODENA (ITALY) Tel: +39 059 415 711 Fax: +39 059 415 729 / 059 415 730 INTERNET: http://www.hansatmp.it E-MAIL:
SERVICE MANUAL. Coolant Level - Sight Glass. Air Cleaner Restriction Indicator
Maintenance 170907 Coolant Level - Sight Glass Daily Check The coolant level gauge is sighted on the rear of the vehicle. The coolant level should be checked when the engine is cold or after 15 minutes
ANDERSON GREENWOOD M25/M25A/M25B/M251/M251B MANIFOLDS
Versatile two-valve static pressure manifolds with a variety of inlet and outlet connections that enable isolation, calibration and venting in single unit FEATURES M25 M25A Remote mounting compact design
Low Pressure Filters
MF, MFD, MFDS Series Spin-On Filters 250 PSI up to 120 GPM Hydraulic Symbol /80/85/160/180 MF 90/95/190/195 A A B B Features MF Filters are manufactured with an aluminum head. Choice of NPT, SAE straight